cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 in_bestweapon_info_t in_bestweapon_info[IN_BESTWEAPON_MAX];
 201
 202 void IN_BestWeapon_Register(const char *name, int impulse, int weaponbit, int activeweaponcode, int ammostat, int ammomin)
 203 {
 204         int i;
 205         for(i = 0; i < IN_BESTWEAPON_MAX && in_bestweapon_info[i].impulse; ++i)
 206                 if(in_bestweapon_info[i].impulse == impulse)
 207                         break;
 208         if(i >= IN_BESTWEAPON_MAX)
 209         {
 210                 Con_Printf("no slot left for weapon definition; increase IN_BESTWEAPON_MAX\n");
 211                 return; // sorry
 212         }
 213         strlcpy(in_bestweapon_info[i].name, name, sizeof(in_bestweapon_info[i].name));
 214         in_bestweapon_info[i].impulse = impulse;
 215         if(weaponbit != -1)
 216                 in_bestweapon_info[i].weaponbit = weaponbit;
 217         if(activeweaponcode != -1)
 218                 in_bestweapon_info[i].activeweaponcode = activeweaponcode;
 219         if(ammostat != -1)
 220                 in_bestweapon_info[i].ammostat = ammostat;
 221         if(ammomin != -1)
 222                 in_bestweapon_info[i].ammomin = ammomin;
 223 }
 224
 225 void IN_BestWeapon_ResetData (void)
 226 {
 227         memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 228         IN_BestWeapon_Register("1", 1, IT_AXE, IT_AXE, STAT_SHELLS, 0);
 229         IN_BestWeapon_Register("2", 2, IT_SHOTGUN, IT_SHOTGUN, STAT_SHELLS, 1);
 230         IN_BestWeapon_Register("3", 3, IT_SUPER_SHOTGUN, IT_SUPER_SHOTGUN, STAT_SHELLS, 1);
 231         IN_BestWeapon_Register("4", 4, IT_NAILGUN, IT_NAILGUN, STAT_NAILS, 1);
 232         IN_BestWeapon_Register("5", 5, IT_SUPER_NAILGUN, IT_SUPER_NAILGUN, STAT_NAILS, 1);
 233         IN_BestWeapon_Register("6", 6, IT_GRENADE_LAUNCHER, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1);
 234         IN_BestWeapon_Register("7", 7, IT_ROCKET_LAUNCHER, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1);
 235         IN_BestWeapon_Register("8", 8, IT_LIGHTNING, IT_LIGHTNING, STAT_CELLS, 1);
 236         IN_BestWeapon_Register("9", 9, 128, 128, STAT_CELLS, 1); // generic energy weapon for mods
 237         IN_BestWeapon_Register("p", 209, 128, 128, STAT_CELLS, 1); // dpmod plasma gun
 238         IN_BestWeapon_Register("w", 210, 8388608, 8388608, STAT_CELLS, 1); // dpmod plasma wave cannon
 239         IN_BestWeapon_Register("l", 225, HIT_LASER_CANNON, HIT_LASER_CANNON, STAT_CELLS, 1); // hipnotic laser cannon
 240         IN_BestWeapon_Register("h", 226, HIT_MJOLNIR, HIT_MJOLNIR, STAT_CELLS, 0); // hipnotic mjolnir hammer
 241 }
 242
 243 void IN_BestWeapon_Register_f (void)
 244 {
 245         if(Cmd_Argc() == 7)
 246         {
 247                 IN_BestWeapon_Register(
 248                         Cmd_Argv(1),
 249                         atoi(Cmd_Argv(2)),
 250                         atoi(Cmd_Argv(3)),
 251                         atoi(Cmd_Argv(4)),
 252                         atoi(Cmd_Argv(5)),
 253                         atoi(Cmd_Argv(6))
 254                 );
 255         }
 256         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "clear"))
 257         {
 258                 memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 259         }
 260         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "quake"))
 261         {
 262                 IN_BestWeapon_ResetData();
 263         }
 264         else
 265         {
 266                 Con_Printf("Usage: %s weaponshortname impulse itemcode activeweaponcode ammostat ammomin; %s clear; %s quake\n", Cmd_Argv(0), Cmd_Argv(0), Cmd_Argv(0));
 267         }
 268 }
 269
 270 void IN_BestWeapon (void)
 271 {
 272         int i, n;
 273         const char *t;
 274         if (Cmd_Argc() < 2)
 275         {
 276                 Con_Printf("bestweapon requires 1 or more parameters\n");
 277                 return;
 278         }
 279         for (i = 1;i < Cmd_Argc();i++)
 280         {
 281                 t = Cmd_Argv(i);
 282                 // figure out which weapon this character refers to
 283                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 284                 {
 285                         if (!strcmp(in_bestweapon_info[n].name, t))
 286                         {
 287                                 // we found out what weapon this character refers to
 288                                 // check if the inventory contains the weapon and enough ammo
 289                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 290                                 {
 291                                         // we found one of the weapons the player wanted
 292                                         // send an impulse to switch to it
 293                                         in_impulse = in_bestweapon_info[n].impulse;
 294                                         return;
 295                                 }
 296                                 break;
 297                         }
 298                 }
 299                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 300         }
 301         // if we couldn't find any of the weapons, there's nothing more we can do...
 302 }
 303
 304 void IN_CycleWeapon (void)
 305 {
 306         int i, n;
 307         int first = -1;
 308         qboolean found = false;
 309         const char *t;
 310         if (Cmd_Argc() < 2)
 311         {
 312                 Con_Printf("bestweapon requires 1 or more parameters\n");
 313                 return;
 314         }
 315         for (i = 1;i < Cmd_Argc();i++)
 316         {
 317                 t = Cmd_Argv(i);
 318                 // figure out which weapon this character refers to
 319                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 320                 {
 321                         if (!strcmp(in_bestweapon_info[n].name, t))
 322                         {
 323                                 // we found out what weapon this character refers to
 324                                 // check if the inventory contains the weapon and enough ammo
 325                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 326                                 {
 327                                         // we found one of the weapons the player wanted
 328                                         if(first == -1)
 329                                                 first = n;
 330                                         if(found)
 331                                         {
 332                                                 in_impulse = in_bestweapon_info[n].impulse;
 333                                                 return;
 334                                         }
 335                                         if(cl.stats[STAT_ACTIVEWEAPON] == in_bestweapon_info[n].activeweaponcode)
 336                                                 found = true;
 337                                 }
 338                                 break;
 339                         }
 340                 }
 341                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 342         }
 343         if(first != -1)
 344         {
 345                 in_impulse = in_bestweapon_info[first].impulse;
 346                 return;
 347         }
 348         // if we couldn't find any of the weapons, there's nothing more we can do...
 349 }
 350
 351 /*
 352 ===============
 353 CL_KeyState
 354
 355 Returns 0.25 if a key was pressed and released during the frame,
 356 0.5 if it was pressed and held
 357 0 if held then released, and
 358 1.0 if held for the entire time
 359 ===============
 360 */
 361 float CL_KeyState (kbutton_t *key)
 362 {
 363         float           val;
 364         qboolean        impulsedown, impulseup, down;
 365
 366         impulsedown = key->state & 2;
 367         impulseup = key->state & 4;
 368         down = key->state & 1;
 369         val = 0;
 370
 371         if (impulsedown && !impulseup)
 372         {
 373                 if (down)
 374                         val = 0.5;      // pressed and held this frame
 375                 else
 376                         val = 0;        //      I_Error ();
 377         }
 378         if (impulseup && !impulsedown)
 379         {
 380                 if (down)
 381                         val = 0;        //      I_Error ();
 382                 else
 383                         val = 0;        // released this frame
 384         }
 385         if (!impulsedown && !impulseup)
 386         {
 387                 if (down)
 388                         val = 1.0;      // held the entire frame
 389                 else
 390                         val = 0;        // up the entire frame
 391         }
 392         if (impulsedown && impulseup)
 393         {
 394                 if (down)
 395                         val = 0.75;     // released and re-pressed this frame
 396                 else
 397                         val = 0.25;     // pressed and released this frame
 398         }
 399
 400         key->state &= 1;                // clear impulses
 401
 402         return val;
 403 }
 404
 405
 406
 407
 408 //==========================================================================
 409
 410 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 411 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 412 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 413 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 414
 415 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 416
 417 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 418 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 419
 420 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 421
 422 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 423 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
 424 cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
 425 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 426 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 427 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 428 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 429 cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
 430 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
 431 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "1", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 432 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 433 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 434 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 435 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 436 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 437 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (should match sv_airaccel_qw)"};
 438 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction)"};
 439
 440 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
 441 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
 442
 443 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 444 cvar_t m_accelerate = {CVAR_SAVE, "m_accelerate","1", "mouse acceleration factor (try 2)"};
 445 cvar_t m_accelerate_minspeed = {CVAR_SAVE, "m_accelerate_minspeed","5000", "below this speed, no acceleration is done"};
 446 cvar_t m_accelerate_maxspeed = {CVAR_SAVE, "m_accelerate_maxspeed","10000", "above this speed, full acceleration is done"};
 447 cvar_t m_accelerate_filter = {CVAR_SAVE, "m_accelerate_filter","0.1", "mouse acceleration factor filtering"};
 448
 449 cvar_t cl_netfps = {CVAR_SAVE, "cl_netfps","20", "how many input packets to send to server each second"};
 450 cvar_t cl_netrepeatinput = {CVAR_SAVE, "cl_netrepeatinput", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
 451 cvar_t cl_netimmediatebuttons = {CVAR_SAVE, "cl_netimmediatebuttons", "1", "sends extra packets whenever your buttons change or an impulse is used (basically: whenever you click fire or change weapon)"};
 452
 453 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 454
 455 extern cvar_t v_flipped;
 456
 457 /*
 458 ================
 459 CL_AdjustAngles
 460
 461 Moves the local angle positions
 462 ================
 463 */
 464 void CL_AdjustAngles (void)
 465 {
 466         float   speed;
 467         float   up, down;
 468
 469         if (in_speed.state & 1)
 470                 speed = cl.realframetime * cl_anglespeedkey.value;
 471         else
 472                 speed = cl.realframetime;
 473
 474         if (!(in_strafe.state & 1))
 475         {
 476                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 477                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 478         }
 479         if (in_klook.state & 1)
 480         {
 481                 V_StopPitchDrift ();
 482                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 483                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 484         }
 485
 486         up = CL_KeyState (&in_lookup);
 487         down = CL_KeyState(&in_lookdown);
 488
 489         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 490         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 491
 492         if (up || down)
 493                 V_StopPitchDrift ();
 494
 495         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 496         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
 497         if (cl.viewangles[YAW] >= 180)
 498                 cl.viewangles[YAW] -= 360;
 499         if (cl.viewangles[PITCH] >= 180)
 500                 cl.viewangles[PITCH] -= 360;
 501         cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 502         cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
 503 }
 504
 505 int cl_ignoremousemoves = 2;
 506
 507 /*
 508 ================
 509 CL_Input
 510
 511 Send the intended movement message to the server
 512 ================
 513 */
 514 void CL_Input (void)
 515 {
 516         float mx, my;
 517         static float old_mouse_x = 0, old_mouse_y = 0;
 518
 519         // clamp before the move to prevent starting with bad angles
 520         CL_AdjustAngles ();
 521
 522         if(v_flipped.integer)
 523                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 524
 525         // reset some of the command fields
 526         cl.cmd.forwardmove = 0;
 527         cl.cmd.sidemove = 0;
 528         cl.cmd.upmove = 0;
 529
 530         // get basic movement from keyboard
 531         if (in_strafe.state & 1)
 532         {
 533                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 534                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 535         }
 536
 537         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 538         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 539
 540         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 541         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 542
 543         if (! (in_klook.state & 1) )
 544         {
 545                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 546                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 547         }
 548
 549         // adjust for speed key
 550         if (in_speed.state & 1)
 551         {
 552                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 553                 cl.cmd.sidemove *= cl_movespeedkey.value;
 554                 cl.cmd.upmove *= cl_movespeedkey.value;
 555         }
 556
 557         // allow mice or other external controllers to add to the move
 558         IN_Move ();
 559
 560         // apply m_accelerate if it is on
 561         if(m_accelerate.value > 1)
 562         {
 563                 static float averagespeed = 0;
 564                 float speed, f, mi, ma;
 565
 566                 speed = sqrt(in_mouse_x * in_mouse_x + in_mouse_y * in_mouse_y) / cl.realframetime;
 567                 if(m_accelerate_filter.value > 0)
 568                         f = bound(0, cl.realframetime / m_accelerate_filter.value, 1);
 569                 else
 570                         f = 1;
 571                 averagespeed = speed * f + averagespeed * (1 - f);
 572
 573                 mi = max(1, m_accelerate_minspeed.value);
 574                 ma = max(m_accelerate_minspeed.value + 1, m_accelerate_maxspeed.value);
 575
 576                 if(averagespeed <= mi)
 577                 {
 578                         f = 1;
 579                 }
 580                 else if(averagespeed >= ma)
 581                 {
 582                         f = m_accelerate.value;
 583                 }
 584                 else
 585                 {
 586                         /*
 587                         f = log(averagespeed);
 588                         mi = log(mi);
 589                         ma = log(ma);
 590                         */
 591                         f = averagespeed;
 592                         mi = mi;
 593                         ma = ma;
 594                         f = (f - mi) / (ma - mi) * (m_accelerate.value - 1) + 1;
 595                 }
 596
 597                 in_mouse_x *= f;
 598                 in_mouse_y *= f;
 599         }
 600
 601         // apply m_filter if it is on
 602         mx = in_mouse_x;
 603         my = in_mouse_y;
 604         if (m_filter.integer)
 605         {
 606                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 607                 in_mouse_y = (my + old_mouse_y) * 0.5;
 608         }
 609         old_mouse_x = mx;
 610         old_mouse_y = my;
 611
 612         // ignore a mouse move if mouse was activated/deactivated this frame
 613         if (cl_ignoremousemoves)
 614         {
 615                 cl_ignoremousemoves--;
 616                 in_mouse_x = old_mouse_x = 0;
 617                 in_mouse_y = old_mouse_y = 0;
 618         }
 619
 620         // if not in menu, apply mouse move to viewangles/movement
 621         if (!key_consoleactive && key_dest == key_game && !cl.csqc_wantsmousemove)
 622         {
 623                 float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
 624                 if (cl_prydoncursor.integer)
 625                 {
 626                         // mouse interacting with the scene, mostly stationary view
 627                         V_StopPitchDrift();
 628                         cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
 629                         cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
 630                 }
 631                 else if (in_strafe.state & 1)
 632                 {
 633                         // strafing mode, all looking is movement
 634                         V_StopPitchDrift();
 635                         cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 636                         if (noclip_anglehack)
 637                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 638                         else
 639                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 640                 }
 641                 else if ((in_mlook.state & 1) || freelook.integer)
 642                 {
 643                         // mouselook, lookstrafe causes turning to become strafing
 644                         V_StopPitchDrift();
 645                         if (lookstrafe.integer)
 646                                 cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 647                         else
 648                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 649                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * modulatedsensitivity * cl.viewzoom;
 650                 }
 651                 else
 652                 {
 653                         // non-mouselook, yaw turning and forward/back movement
 654                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 655                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 656                 }
 657         }
 658         else // don't pitch drift when csqc is controlling the mouse
 659                 V_StopPitchDrift();
 660
 661         if(v_flipped.integer)
 662         {
 663                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 664                 cl.cmd.sidemove = -cl.cmd.sidemove;
 665         }
 666
 667         // clamp after the move to prevent rendering with bad angles
 668         CL_AdjustAngles ();
 669 }
 670
 671 #include "cl_collision.h"
 672
 673 void CL_UpdatePrydonCursor(void)
 674 {
 675         vec3_t temp;
 676
 677         if (!cl_prydoncursor.integer)
 678                 VectorClear(cl.cmd.cursor_screen);
 679
 680         /*
 681         if (cl.cmd.cursor_screen[0] < -1)
 682         {
 683                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 684                 cl.cmd.cursor_screen[0] = -1;
 685         }
 686         if (cl.cmd.cursor_screen[0] > 1)
 687         {
 688                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 689                 cl.cmd.cursor_screen[0] = 1;
 690         }
 691         if (cl.cmd.cursor_screen[1] < -1)
 692         {
 693                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 694                 cl.cmd.cursor_screen[1] = -1;
 695         }
 696         if (cl.cmd.cursor_screen[1] > 1)
 697         {
 698                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 699                 cl.cmd.cursor_screen[1] = 1;
 700         }
 701         */
 702         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 703         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 704         cl.cmd.cursor_screen[2] = 1;
 705
 706         // calculate current view matrix
 707         Matrix4x4_OriginFromMatrix(&r_refdef.view.matrix, cl.cmd.cursor_start);
 708         // calculate direction vector of cursor in viewspace by using frustum slopes
 709         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
 710         Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
 711         // trace from view origin to the cursor
 712         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
 713 }
 714
 715 typedef enum waterlevel_e
 716 {
 717         WATERLEVEL_NONE,
 718         WATERLEVEL_WETFEET,
 719         WATERLEVEL_SWIMMING,
 720         WATERLEVEL_SUBMERGED
 721 }
 722 waterlevel_t;
 723
 724 typedef struct cl_clientmovement_state_s
 725 {
 726         // position
 727         vec3_t origin;
 728         vec3_t velocity;
 729         // current bounding box (different if crouched vs standing)
 730         vec3_t mins;
 731         vec3_t maxs;
 732         // currently on the ground
 733         qboolean onground;
 734         // currently crouching
 735         qboolean crouched;
 736         // what kind of water (SUPERCONTENTS_LAVA for instance)
 737         int watertype;
 738         // how deep
 739         waterlevel_t waterlevel;
 740         // weird hacks when jumping out of water
 741         // (this is in seconds and counts down to 0)
 742         float waterjumptime;
 743
 744         // user command
 745         usercmd_t cmd;
 746 }
 747 cl_clientmovement_state_t;
 748
 749 #define NUMOFFSETS 27
 750 static vec3_t offsets[NUMOFFSETS] =
 751 {
 752 // 1 no nudge (just return the original if this test passes)
 753         { 0.000,  0.000,  0.000},
 754 // 6 simple nudges
 755         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 756         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 757         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 758 // 4 diagonal flat nudges
 759         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 760         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 761 // 8 diagonal upward nudges
 762         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 763         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 764         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 765         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 766 // 8 diagonal downward nudges
 767         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 768         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 769         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 770         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 771 };
 772
 773 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 774 {
 775         int i;
 776         vec3_t neworigin;
 777         for (i = 0;i < NUMOFFSETS;i++)
 778         {
 779                 VectorAdd(offsets[i], s->origin, neworigin);
 780                 if (!CL_Move(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
 781                 {
 782                         VectorCopy(neworigin, s->origin);
 783                         return true;
 784                 }
 785         }
 786         // if all offsets failed, give up
 787         return false;
 788 }
 789
 790 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 791 {
 792         vec3_t origin1, origin2;
 793         trace_t trace;
 794
 795         // make sure player is not stuck
 796         CL_ClientMovement_Unstick(s);
 797
 798         // set crouched
 799         if (s->cmd.crouch)
 800         {
 801                 // wants to crouch, this always works..
 802                 if (!s->crouched)
 803                         s->crouched = true;
 804         }
 805         else
 806         {
 807                 // wants to stand, if currently crouching we need to check for a
 808                 // low ceiling first
 809                 if (s->crouched)
 810                 {
 811                         trace = CL_Move(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 812                         if (!trace.startsolid)
 813                                 s->crouched = false;
 814                 }
 815         }
 816         if (s->crouched)
 817         {
 818                 VectorCopy(cl.playercrouchmins, s->mins);
 819                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 820         }
 821         else
 822         {
 823                 VectorCopy(cl.playerstandmins, s->mins);
 824                 VectorCopy(cl.playerstandmaxs, s->maxs);
 825         }
 826
 827         // set onground
 828         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 829         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 2);
 830         trace = CL_Move(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 831         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 832
 833         // set watertype/waterlevel
 834         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 835         s->waterlevel = WATERLEVEL_NONE;
 836         s->watertype = CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 837         if (s->watertype)
 838         {
 839                 s->waterlevel = WATERLEVEL_WETFEET;
 840                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 841                 if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 842                 {
 843                         s->waterlevel = WATERLEVEL_SWIMMING;
 844                         origin1[2] = s->origin[2] + 22;
 845                         if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 846                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 847                 }
 848         }
 849
 850         // water jump prediction
 851         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 852                 s->waterjumptime = 0;
 853 }
 854
 855 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 856 {
 857         int bump;
 858         double t;
 859         vec_t f;
 860         vec3_t neworigin;
 861         vec3_t currentorigin2;
 862         vec3_t neworigin2;
 863         vec3_t primalvelocity;
 864         trace_t trace;
 865         trace_t trace2;
 866         trace_t trace3;
 867         CL_ClientMovement_UpdateStatus(s);
 868         VectorCopy(s->velocity, primalvelocity);
 869         for (bump = 0, t = s->cmd.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 870         {
 871                 VectorMA(s->origin, t, s->velocity, neworigin);
 872                 trace = CL_Move(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 873                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 874                 {
 875                         // may be a step or wall, try stepping up
 876                         // first move forward at a higher level
 877                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
 878                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
 879                         trace2 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 880                         if (!trace2.startsolid)
 881                         {
 882                                 // then move down from there
 883                                 VectorCopy(trace2.endpos, currentorigin2);
 884                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 885                                 trace3 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 886                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 887                                 // accept the new trace if it made some progress
 888                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 889                                 {
 890                                         trace = trace2;
 891                                         VectorCopy(trace3.endpos, trace.endpos);
 892                                 }
 893                         }
 894                 }
 895
 896                 // check if it moved at all
 897                 if (trace.fraction >= 0.001)
 898                         VectorCopy(trace.endpos, s->origin);
 899
 900                 // check if it moved all the way
 901                 if (trace.fraction == 1)
 902                         break;
 903
 904                 //if (trace.plane.normal[2] > 0.7)
 905                 //      s->onground = true;
 906
 907                 t -= t * trace.fraction;
 908
 909                 f = DotProduct(s->velocity, trace.plane.normal);
 910                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 911         }
 912         if (s->waterjumptime > 0)
 913                 VectorCopy(primalvelocity, s->velocity);
 914 }
 915
 916
 917 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 918 {
 919         vec_t wishspeed;
 920         vec_t f;
 921         vec3_t wishvel;
 922         vec3_t wishdir;
 923
 924         // water jump only in certain situations
 925         // this mimics quakeworld code
 926         if (s->cmd.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
 927         {
 928                 vec3_t forward;
 929                 vec3_t yawangles;
 930                 vec3_t spot;
 931                 VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
 932                 AngleVectors(yawangles, forward, NULL, NULL);
 933                 VectorMA(s->origin, 24, forward, spot);
 934                 spot[2] += 8;
 935                 if (CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
 936                 {
 937                         spot[2] += 24;
 938                         if (!CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
 939                         {
 940                                 VectorScale(forward, 50, s->velocity);
 941                                 s->velocity[2] = 310;
 942                                 s->waterjumptime = 2;
 943                                 s->onground = false;
 944                                 s->cmd.canjump = false;
 945                         }
 946                 }
 947         }
 948
 949         if (!(s->cmd.forwardmove*s->cmd.forwardmove + s->cmd.sidemove*s->cmd.sidemove + s->cmd.upmove*s->cmd.upmove))
 950         {
 951                 // drift towards bottom
 952                 VectorSet(wishvel, 0, 0, -60);
 953         }
 954         else
 955         {
 956                 // swim
 957                 vec3_t forward;
 958                 vec3_t right;
 959                 vec3_t up;
 960                 // calculate movement vector
 961                 AngleVectors(s->cmd.viewangles, forward, right, up);
 962                 VectorSet(up, 0, 0, 1);
 963                 VectorMAMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, s->cmd.upmove, up, wishvel);
 964         }
 965
 966         // split wishvel into wishspeed and wishdir
 967         wishspeed = VectorLength(wishvel);
 968         if (wishspeed)
 969                 VectorScale(wishvel, 1 / wishspeed, wishdir);
 970         else
 971                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
 972         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
 973
 974         if (s->crouched)
 975                 wishspeed *= 0.5;
 976
 977         if (s->waterjumptime <= 0)
 978         {
 979                 // water friction
 980                 f = 1 - s->cmd.frametime * cl.movevars_waterfriction * (cls.protocol == PROTOCOL_QUAKEWORLD ? s->waterlevel : 1);
 981                 f = bound(0, f, 1);
 982                 VectorScale(s->velocity, f, s->velocity);
 983
 984                 // water acceleration
 985                 f = wishspeed - DotProduct(s->velocity, wishdir);
 986                 if (f > 0)
 987                 {
 988                         f = min(cl.movevars_wateraccelerate * s->cmd.frametime * wishspeed, f);
 989                         VectorMA(s->velocity, f, wishdir, s->velocity);
 990                 }
 991
 992                 // holding jump button swims upward slowly
 993                 if (s->cmd.jump)
 994                 {
 995                         if (s->watertype & SUPERCONTENTS_LAVA)
 996                                 s->velocity[2] =  50;
 997                         else if (s->watertype & SUPERCONTENTS_SLIME)
 998                                 s->velocity[2] =  80;
 999                         else
1000                         {
1001                                 if (gamemode == GAME_NEXUIZ)
1002                                         s->velocity[2] = 200;
1003                                 else
1004                                         s->velocity[2] = 100;
1005                         }
1006                 }
1007         }
1008
1009         CL_ClientMovement_Move(s);
1010 }
1011
1012 void CL_ClientMovement_Physics_CPM_PM_Aircontrol(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1013 {
1014         vec_t zspeed, speed, dot, k;
1015
1016         if(s->cmd.forwardmove == 0 || s->cmd.sidemove != 0)
1017                 return;
1018
1019         zspeed = s->velocity[2];
1020         s->velocity[2] = 0;
1021         speed = VectorNormalizeLength(s->velocity);
1022
1023         dot = DotProduct(s->velocity, wishdir);
1024         k = 32;
1025         k *= cl.movevars_aircontrol*dot*dot*s->cmd.frametime;
1026
1027         if(dot > 0) { // we can't change direction while slowing down
1028                 VectorMAM(speed, s->velocity, k, wishdir, s->velocity);
1029                 VectorNormalize(s->velocity);
1030         }
1031
1032         VectorScale(s->velocity, speed, s->velocity);
1033         s->velocity[2] = zspeed;
1034 }
1035
1036 void CL_ClientMovement_Physics_PM_Accelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed, vec_t accel, vec_t accelqw, vec_t sidefric)
1037 {
1038         vec_t vel_straight, vel_z;
1039         vec3_t vel_perpend;
1040         vec_t addspeed;
1041
1042         vel_straight = DotProduct(s->velocity, wishdir);
1043         vel_z = s->velocity[2];
1044         VectorMA(s->velocity, -vel_straight, wishdir, vel_perpend); vel_perpend[2] -= vel_z;
1045
1046         addspeed = wishspeed - vel_straight;
1047         if(addspeed > 0)
1048                 vel_straight = vel_straight + min(addspeed, accel * s->cmd.frametime * wishspeed) * accelqw;
1049         if(wishspeed > 0)
1050                 vel_straight = vel_straight + min(wishspeed, accel * s->cmd.frametime * wishspeed) * (1 - accelqw);
1051
1052         VectorScale(vel_perpend, 1 - s->cmd.frametime * wishspeed * sidefric, vel_perpend);
1053
1054         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1055         s->velocity[2] += vel_z;
1056 }
1057
1058 void CL_ClientMovement_Physics_PM_AirAccelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1059 {
1060     vec3_t curvel, wishvel, acceldir, curdir;
1061     float addspeed, accelspeed, curspeed;
1062     float dot;
1063
1064     float airforwardaccel = cl.movevars_warsowbunny_airforwardaccel;
1065     float bunnyaccel = cl.movevars_warsowbunny_accel;
1066     float bunnytopspeed = cl.movevars_warsowbunny_topspeed;
1067     float turnaccel = cl.movevars_warsowbunny_turnaccel;
1068     float backtosideratio = cl.movevars_warsowbunny_backtosideratio;
1069
1070     if( !wishspeed )
1071         return;
1072
1073     VectorCopy( s->velocity, curvel );
1074     curvel[2] = 0;
1075     curspeed = VectorLength( curvel );
1076
1077     if( wishspeed > curspeed * 1.01f )
1078     {
1079         float accelspeed = curspeed + airforwardaccel * cl.movevars_maxairspeed * s->cmd.frametime;
1080         if( accelspeed < wishspeed )
1081             wishspeed = accelspeed;
1082     }
1083     else
1084     {
1085         float f = ( bunnytopspeed - curspeed ) / ( bunnytopspeed - cl.movevars_maxairspeed );
1086         if( f < 0 )
1087             f = 0;
1088         wishspeed = max( curspeed, cl.movevars_maxairspeed ) + bunnyaccel * f * cl.movevars_maxairspeed * s->cmd.frametime;
1089     }
1090     VectorScale( wishdir, wishspeed, wishvel );
1091     VectorSubtract( wishvel, curvel, acceldir );
1092     addspeed = VectorNormalizeLength( acceldir );
1093
1094     accelspeed = turnaccel * cl.movevars_maxairspeed /* wishspeed */ * s->cmd.frametime;
1095     if( accelspeed > addspeed )
1096         accelspeed = addspeed;
1097
1098     if( backtosideratio < 1.0f )
1099     {
1100         VectorNormalize2( curvel, curdir );
1101         dot = DotProduct( acceldir, curdir );
1102         if( dot < 0 )
1103             VectorMA( acceldir, -( 1.0f - backtosideratio ) * dot, curdir, acceldir );
1104     }
1105
1106     VectorMA( s->velocity, accelspeed, acceldir, s->velocity );
1107 }
1108
1109 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
1110 {
1111         vec_t friction;
1112         vec_t wishspeed;
1113         vec_t addspeed;
1114         vec_t accelspeed;
1115         vec_t f;
1116         vec3_t forward;
1117         vec3_t right;
1118         vec3_t up;
1119         vec3_t wishvel;
1120         vec3_t wishdir;
1121         vec3_t yawangles;
1122         trace_t trace;
1123
1124         // jump if on ground with jump button pressed but only if it has been
1125         // released at least once since the last jump
1126         if (s->cmd.jump)
1127         {
1128                 if (s->onground && (s->cmd.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
1129                 {
1130                         s->velocity[2] += cl.movevars_jumpvelocity;
1131                         s->onground = false;
1132                         s->cmd.canjump = false;
1133                 }
1134         }
1135         else
1136                 s->cmd.canjump = true;
1137
1138         // calculate movement vector
1139         VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1140         AngleVectors(yawangles, forward, right, up);
1141         VectorMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, wishvel);
1142
1143         // split wishvel into wishspeed and wishdir
1144         wishspeed = VectorLength(wishvel);
1145         if (wishspeed)
1146                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1147         else
1148                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1149         // check if onground
1150         if (s->onground)
1151         {
1152                 wishspeed = min(wishspeed, cl.movevars_maxspeed);
1153                 if (s->crouched)
1154                         wishspeed *= 0.5;
1155
1156                 // apply edge friction
1157                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1158                 if (f > 0)
1159                 {
1160                         friction = cl.movevars_friction;
1161                         if (cl.movevars_edgefriction != 1)
1162                         {
1163                                 vec3_t neworigin2;
1164                                 vec3_t neworigin3;
1165                                 // note: QW uses the full player box for the trace, and yet still
1166                                 // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1167                                 // this mimics it for compatibility
1168                                 VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1169                                 VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1170                                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1171                                         trace = CL_Move(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1172                                 else
1173                                         trace = CL_Move(neworigin2, vec3_origin, vec3_origin, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1174                                 if (trace.fraction == 1 && !trace.startsolid)
1175                                         friction *= cl.movevars_edgefriction;
1176                         }
1177                         // apply ground friction
1178                         f = 1 - s->cmd.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
1179                         f = max(f, 0);
1180                         VectorScale(s->velocity, f, s->velocity);
1181                 }
1182                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1183                 if (addspeed > 0)
1184                 {
1185                         accelspeed = min(cl.movevars_accelerate * s->cmd.frametime * wishspeed, addspeed);
1186                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1187                 }
1188                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1189                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1190                         s->velocity[2] = 0;
1191                 if (VectorLength2(s->velocity))
1192                         CL_ClientMovement_Move(s);
1193         }
1194         else
1195         {
1196                 if (s->waterjumptime <= 0)
1197                 {
1198                         // apply air speed limit
1199                         vec_t accel, wishspeed2, accelqw;
1200                         qboolean accelerating;
1201
1202                         accelqw = cl.movevars_airaccel_qw;
1203                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1204                         if (s->crouched)
1205                                 wishspeed *= 0.5;
1206                         accel = cl.movevars_airaccelerate;
1207
1208                         accelerating = (DotProduct(s->velocity, wishdir) > 0);
1209                         wishspeed2 = wishspeed;
1210
1211                         // CPM: air control
1212                         if(cl.movevars_airstopaccelerate != 0)
1213                                 if(DotProduct(s->velocity, wishdir) < 0)
1214                                         accel = cl.movevars_airstopaccelerate;
1215                         if(s->cmd.forwardmove == 0 && s->cmd.sidemove != 0)
1216                         {
1217                                 if(cl.movevars_maxairstrafespeed)
1218                                         if(wishspeed > cl.movevars_maxairstrafespeed)
1219                                                 wishspeed = cl.movevars_maxairstrafespeed;
1220                                 if(cl.movevars_airstrafeaccelerate)
1221                                 {
1222                                         accel = cl.movevars_airstrafeaccelerate;
1223                                         if(cl.movevars_airstrafeaccelerate > cl.movevars_airaccelerate)
1224                                                 accelqw = 1;
1225                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1226                                                 // if partially non-QW acceleration is used (as in, strafing
1227                                                 // would get faster than moving forward straight)
1228                                 }
1229                         }
1230                         // !CPM
1231
1232                         if(cl.movevars_warsowbunny_turnaccel && accelerating && s->cmd.sidemove == 0 && s->cmd.forwardmove != 0)
1233                                 CL_ClientMovement_Physics_PM_AirAccelerate(s, wishdir, wishspeed2);
1234                         else
1235                                 CL_ClientMovement_Physics_PM_Accelerate(s, wishdir, wishspeed, accel, accelqw, cl.movevars_airaccel_sideways_friction / cl.movevars_maxairspeed);
1236
1237                         if(cl.movevars_aircontrol)
1238                                 CL_ClientMovement_Physics_CPM_PM_Aircontrol(s, wishdir, wishspeed2);
1239                 }
1240                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1241                 CL_ClientMovement_Move(s);
1242         }
1243 }
1244
1245 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1246 {
1247         //Con_Printf(" %f", frametime);
1248         if (!s->cmd.jump)
1249                 s->cmd.canjump = true;
1250         s->waterjumptime -= s->cmd.frametime;
1251         CL_ClientMovement_UpdateStatus(s);
1252         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1253                 CL_ClientMovement_Physics_Swim(s);
1254         else
1255                 CL_ClientMovement_Physics_Walk(s);
1256 }
1257
1258 extern cvar_t slowmo;
1259 void CL_UpdateMoveVars(void)
1260 {
1261         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1262         {
1263         }
1264         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1265         {
1266                 cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1267                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1268                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1269                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1270                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1271                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1272                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1273                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1274                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1275                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1276                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1277                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1278                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1279                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1280                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1281                 cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
1282                 cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
1283                 cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
1284                 cl.movevars_airstopaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTOPACCELERATE];
1285                 cl.movevars_airstrafeaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCELERATE];
1286                 cl.movevars_maxairstrafespeed = cl.statsf[STAT_MOVEVARS_MAXAIRSTRAFESPEED];
1287                 cl.movevars_aircontrol = cl.statsf[STAT_MOVEVARS_AIRCONTROL];
1288                 cl.movevars_warsowbunny_airforwardaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_AIRFORWARDACCEL];
1289                 cl.movevars_warsowbunny_accel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_ACCEL];
1290                 cl.movevars_warsowbunny_topspeed = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TOPSPEED];
1291                 cl.movevars_warsowbunny_turnaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TURNACCEL];
1292                 cl.movevars_warsowbunny_backtosideratio = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_BACKTOSIDERATIO];
1293         }
1294         else
1295         {
1296                 cl.movevars_timescale = slowmo.value;
1297                 cl.movevars_gravity = sv_gravity.value;
1298                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1299                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1300                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1301                 cl.movevars_accelerate = cl_movement_accelerate.value;
1302                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1303                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1304                 cl.movevars_friction = cl_movement_friction.value;
1305                 cl.movevars_wallfriction = cl_movement_wallfriction.value;
1306                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1307                 cl.movevars_entgravity = 1;
1308                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1309                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1310                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1311                 cl.movevars_stepheight = cl_movement_stepheight.value;
1312                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1313                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1314                 cl.movevars_airstopaccelerate = 0;
1315                 cl.movevars_airstrafeaccelerate = 0;
1316                 cl.movevars_maxairstrafespeed = 0;
1317                 cl.movevars_aircontrol = 0;
1318                 cl.movevars_warsowbunny_airforwardaccel = 0;
1319                 cl.movevars_warsowbunny_accel = 0;
1320                 cl.movevars_warsowbunny_topspeed = 0;
1321                 cl.movevars_warsowbunny_turnaccel = 0;
1322                 cl.movevars_warsowbunny_backtosideratio = 0;
1323         }
1324 }
1325
1326 void CL_ClientMovement_Replay(void)
1327 {
1328         int i;
1329         double totalmovemsec;
1330         cl_clientmovement_state_t s;
1331
1332         if (cl.movement_predicted && !cl.movement_replay)
1333                 return;
1334
1335         // set up starting state for the series of moves
1336         memset(&s, 0, sizeof(s));
1337         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1338         VectorCopy(cl.mvelocity[0], s.velocity);
1339         s.crouched = true; // will be updated on first move
1340         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1341
1342         totalmovemsec = 0;
1343         for (i = 0;i < CL_MAX_USERCMDS;i++)
1344                 if (cl.movecmd[i].sequence > cls.servermovesequence)
1345                         totalmovemsec += cl.movecmd[i].msec;
1346         cl.movement_predicted = totalmovemsec >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1347         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovemsec, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1348         if (cl.movement_predicted)
1349         {
1350                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1351
1352                 // replay the input queue to predict current location
1353                 // note: this relies on the fact there's always one queue item at the end
1354
1355                 // find how many are still valid
1356                 for (i = 0;i < CL_MAX_USERCMDS;i++)
1357                         if (cl.movecmd[i].sequence <= cls.servermovesequence)
1358                                 break;
1359                 // now walk them in oldest to newest order
1360                 for (i--;i >= 0;i--)
1361                 {
1362                         s.cmd = cl.movecmd[i];
1363                         if (i < CL_MAX_USERCMDS - 1)
1364                                 s.cmd.canjump = cl.movecmd[i+1].canjump;
1365                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1366                         //Con_Printf("%i ", s.cmd.msec);
1367                         if (s.cmd.frametime > 0.05)
1368                         {
1369                                 s.cmd.frametime /= 2;
1370                                 CL_ClientMovement_PlayerMove(&s);
1371                         }
1372                         CL_ClientMovement_PlayerMove(&s);
1373                         cl.movecmd[i].canjump = s.cmd.canjump;
1374                 }
1375                 //Con_Printf("\n");
1376         }
1377         else
1378         {
1379                 // get the first movement queue entry to know whether to crouch and such
1380                 s.cmd = cl.movecmd[0];
1381         }
1382         CL_ClientMovement_UpdateStatus(&s);
1383
1384         if (cls.demoplayback) // for bob, speedometer
1385                 VectorCopy(cl.mvelocity[0], cl.movement_velocity);
1386         else
1387         {
1388                 cl.movement_replay = false;
1389                 // update the interpolation target position and velocity
1390                 VectorCopy(s.origin, cl.movement_origin);
1391                 VectorCopy(s.velocity, cl.movement_velocity);
1392         }
1393
1394         // update the onground flag if appropriate
1395         if (cl.movement_predicted)
1396         {
1397                 // when predicted we simply set the flag according to the UpdateStatus
1398                 cl.onground = s.onground;
1399         }
1400         else
1401         {
1402                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1403                 // an update packet is received, but can be forced on here to hide
1404                 // server inconsistencies in the onground flag
1405                 // (which mostly occur when stepping up stairs at very high framerates
1406                 //  where after the step up the move continues forward and not
1407                 //  downward so the ground is not detected)
1408                 //
1409                 // such onground inconsistencies can cause jittery gun bobbing and
1410                 // stair smoothing, so we set onground if UpdateStatus says so
1411                 if (s.onground)
1412                         cl.onground = true;
1413         }
1414
1415         // react to onground state changes (for gun bob)
1416         if (cl.onground)
1417         {
1418                 if (!cl.oldonground)
1419                         cl.hitgroundtime = cl.movecmd[0].time;
1420                 cl.lastongroundtime = cl.movecmd[0].time;
1421         }
1422         cl.oldonground = cl.onground;
1423 }
1424
1425 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1426 {
1427         int bits;
1428
1429         bits = 0;
1430         if (to->viewangles[0] != from->viewangles[0])
1431                 bits |= QW_CM_ANGLE1;
1432         if (to->viewangles[1] != from->viewangles[1])
1433                 bits |= QW_CM_ANGLE2;
1434         if (to->viewangles[2] != from->viewangles[2])
1435                 bits |= QW_CM_ANGLE3;
1436         if (to->forwardmove != from->forwardmove)
1437                 bits |= QW_CM_FORWARD;
1438         if (to->sidemove != from->sidemove)
1439                 bits |= QW_CM_SIDE;
1440         if (to->upmove != from->upmove)
1441                 bits |= QW_CM_UP;
1442         if (to->buttons != from->buttons)
1443                 bits |= QW_CM_BUTTONS;
1444         if (to->impulse != from->impulse)
1445                 bits |= QW_CM_IMPULSE;
1446
1447         MSG_WriteByte(buf, bits);
1448         if (bits & QW_CM_ANGLE1)
1449                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1450         if (bits & QW_CM_ANGLE2)
1451                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1452         if (bits & QW_CM_ANGLE3)
1453                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1454         if (bits & QW_CM_FORWARD)
1455                 MSG_WriteShort(buf, (short) to->forwardmove);
1456         if (bits & QW_CM_SIDE)
1457                 MSG_WriteShort(buf, (short) to->sidemove);
1458         if (bits & QW_CM_UP)
1459                 MSG_WriteShort(buf, (short) to->upmove);
1460         if (bits & QW_CM_BUTTONS)
1461                 MSG_WriteByte(buf, to->buttons);
1462         if (bits & QW_CM_IMPULSE)
1463                 MSG_WriteByte(buf, to->impulse);
1464         MSG_WriteByte(buf, to->msec);
1465 }
1466
1467 /*
1468 ==============
1469 CL_SendMove
1470 ==============
1471 */
1472 usercmd_t nullcmd; // for delta compression of qw moves
1473 void CL_SendMove(void)
1474 {
1475         int i, j, packetloss;
1476         int checksumindex;
1477         int bits;
1478         int maxusercmds;
1479         usercmd_t *cmd;
1480         sizebuf_t buf;
1481         unsigned char data[1024];
1482         double packettime;
1483         int msecdelta;
1484
1485         // if playing a demo, do nothing
1486         if (!cls.netcon)
1487                 return;
1488
1489         // we build up cl.movecmd[0] and then decide whether to send or not
1490         // the prediction code will use this command even though it has not been
1491         // sent yet
1492         cl.cmd.time = cl.time;
1493         cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
1494
1495         // set button bits
1496         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1497         bits = 0;
1498         if (in_attack.state   & 3) bits |=   1;
1499         if (in_jump.state     & 3) bits |=   2;
1500         if (in_button3.state  & 3) bits |=   4;
1501         if (in_button4.state  & 3) bits |=   8;
1502         if (in_button5.state  & 3) bits |=  16;
1503         if (in_button6.state  & 3) bits |=  32;
1504         if (in_button7.state  & 3) bits |=  64;
1505         if (in_button8.state  & 3) bits |= 128;
1506         if (in_use.state      & 3) bits |= 256;
1507         if (key_dest != key_game || key_consoleactive) bits |= 512;
1508         if (cl_prydoncursor.integer) bits |= 1024;
1509         if (in_button9.state  & 3)  bits |=   2048;
1510         if (in_button10.state  & 3) bits |=   4096;
1511         if (in_button11.state  & 3) bits |=   8192;
1512         if (in_button12.state  & 3) bits |=  16384;
1513         if (in_button13.state  & 3) bits |=  32768;
1514         if (in_button14.state  & 3) bits |=  65536;
1515         if (in_button15.state  & 3) bits |= 131072;
1516         if (in_button16.state  & 3) bits |= 262144;
1517         // button bits 19-31 unused currently
1518         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1519         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1520         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1521         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1522         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1523
1524         // set buttons and impulse
1525         cl.cmd.buttons = bits;
1526         cl.cmd.impulse = in_impulse;
1527
1528         // set viewangles
1529         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1530
1531         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[1].time * 1000));
1532         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1533         // ridiculous value rejection (matches qw)
1534         if (cl.cmd.msec > 250)
1535                 cl.cmd.msec = 100;
1536         cl.cmd.frametime = cl.cmd.msec * (1.0 / 1000.0);
1537
1538         cl.cmd.predicted = cl_movement.integer;
1539
1540         // movement is set by input code (forwardmove/sidemove/upmove)
1541         // always dump the first two moves, because they may contain leftover inputs from the last level
1542         if (cl.cmd.sequence <= 2)
1543                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1544
1545         cl.cmd.jump = (cl.cmd.buttons & 2) != 0;
1546         cl.cmd.crouch = 0;
1547         switch (cls.protocol)
1548         {
1549         case PROTOCOL_QUAKEWORLD:
1550         case PROTOCOL_QUAKE:
1551         case PROTOCOL_QUAKEDP:
1552         case PROTOCOL_NEHAHRAMOVIE:
1553         case PROTOCOL_NEHAHRABJP:
1554         case PROTOCOL_NEHAHRABJP2:
1555         case PROTOCOL_NEHAHRABJP3:
1556         case PROTOCOL_DARKPLACES1:
1557         case PROTOCOL_DARKPLACES2:
1558         case PROTOCOL_DARKPLACES3:
1559         case PROTOCOL_DARKPLACES4:
1560         case PROTOCOL_DARKPLACES5:
1561                 break;
1562         case PROTOCOL_DARKPLACES6:
1563         case PROTOCOL_DARKPLACES7:
1564                 // FIXME: cl.movecmd[0].buttons & 16 is +button5, Nexuiz specific
1565                 cl.cmd.crouch = (cl.cmd.buttons & 16) != 0;
1566                 break;
1567         case PROTOCOL_UNKNOWN:
1568                 break;
1569         }
1570
1571         cl.movecmd[0] = cl.cmd;
1572
1573         // don't predict more than 200fps
1574         if (realtime >= cl.lastpackettime + 0.005)
1575                 cl.movement_replay = true; // redo the prediction
1576
1577         // now decide whether to actually send this move
1578         // (otherwise it is only for prediction)
1579
1580         // don't send too often or else network connections can get clogged by a
1581         // high renderer framerate
1582         packettime = 1.0 / bound(1, cl_netfps.value, 1000);
1583         // send input every frame in singleplayer
1584         if (cl.islocalgame)
1585                 packettime = 0;
1586         // always send if buttons changed or an impulse is pending
1587         // even if it violates the rate limit!
1588         if (!cl.movecmd[0].impulse && (!cl_netimmediatebuttons.integer || cl.movecmd[0].buttons == cl.movecmd[1].buttons))
1589         {
1590                 // don't choke the connection with packets (obey rate limit)
1591                 if ((cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS) && !NetConn_CanSend(cls.netcon) && !cl.islocalgame)
1592                         return;
1593                 // don't send too often (cl_netfps)
1594                 if (realtime < cl.lastpackettime + packettime)
1595                         return;
1596         }
1597         // try to round off the lastpackettime to a multiple of the packet interval
1598         // (this causes it to emit packets at a steady beat)
1599         if (packettime > 0)
1600                 cl.lastpackettime = floor(realtime / packettime) * packettime;
1601         else
1602                 cl.lastpackettime = realtime;
1603
1604         buf.maxsize = sizeof(data);
1605         buf.cursize = 0;
1606         buf.data = data;
1607
1608         // send the movement message
1609         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1610         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1611         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1612         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1613         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1614         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1615         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1616         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1617         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1618         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1619         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1620
1621         // set prydon cursor info
1622         CL_UpdatePrydonCursor();
1623
1624         if (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS)
1625         {
1626                 switch (cls.protocol)
1627                 {
1628                 case PROTOCOL_QUAKEWORLD:
1629                         MSG_WriteByte(&buf, qw_clc_move);
1630                         // save the position for a checksum byte
1631                         checksumindex = buf.cursize;
1632                         MSG_WriteByte(&buf, 0);
1633                         // packet loss percentage
1634                         for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1635                                 if (cls.netcon->incoming_unreliablesize[j] == NETGRAPH_LOSTPACKET)
1636                                         packetloss++;
1637                         packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1638                         MSG_WriteByte(&buf, packetloss);
1639                         // write most recent 3 moves
1640                         QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1641                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1642                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.movecmd[0]);
1643                         // calculate the checksum
1644                         buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
1645                         // if delta compression history overflows, request no delta
1646                         if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1647                                 cl.qw_validsequence = 0;
1648                         // request delta compression if appropriate
1649                         if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1650                         {
1651                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1652                                 MSG_WriteByte(&buf, qw_clc_delta);
1653                                 MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1654                         }
1655                         else
1656                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
1657                         break;
1658                 case PROTOCOL_QUAKE:
1659                 case PROTOCOL_QUAKEDP:
1660                 case PROTOCOL_NEHAHRAMOVIE:
1661                 case PROTOCOL_NEHAHRABJP:
1662                 case PROTOCOL_NEHAHRABJP2:
1663                 case PROTOCOL_NEHAHRABJP3:
1664                         // 5 bytes
1665                         MSG_WriteByte (&buf, clc_move);
1666                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1667                         // 3 bytes
1668                         for (i = 0;i < 3;i++)
1669                                 MSG_WriteAngle8i (&buf, cl.movecmd[0].viewangles[i]);
1670                         // 6 bytes
1671                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1672                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1673                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1674                         // 2 bytes
1675                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1676                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1677                         break;
1678                 case PROTOCOL_DARKPLACES2:
1679                 case PROTOCOL_DARKPLACES3:
1680                         // 5 bytes
1681                         MSG_WriteByte (&buf, clc_move);
1682                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1683                         // 12 bytes
1684                         for (i = 0;i < 3;i++)
1685                                 MSG_WriteAngle32f (&buf, cl.movecmd[0].viewangles[i]);
1686                         // 6 bytes
1687                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1688                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1689                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1690                         // 2 bytes
1691                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1692                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1693                         break;
1694                 case PROTOCOL_DARKPLACES1:
1695                 case PROTOCOL_DARKPLACES4:
1696                 case PROTOCOL_DARKPLACES5:
1697                         // 5 bytes
1698                         MSG_WriteByte (&buf, clc_move);
1699                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1700                         // 6 bytes
1701                         for (i = 0;i < 3;i++)
1702                                 MSG_WriteAngle16i (&buf, cl.movecmd[0].viewangles[i]);
1703                         // 6 bytes
1704                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1705                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1706                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1707                         // 2 bytes
1708                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1709                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1710                 case PROTOCOL_DARKPLACES6:
1711                 case PROTOCOL_DARKPLACES7:
1712                         // set the maxusercmds variable to limit how many should be sent
1713                         maxusercmds = bound(1, cl_netrepeatinput.integer + 1, CL_MAX_USERCMDS);
1714                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1715                         if (!cl.cmd.predicted)
1716                                 maxusercmds = 1;
1717
1718                         // send the latest moves in order, the old ones will be
1719                         // ignored by the server harmlessly, however if the previous
1720                         // packets were lost these moves will be used
1721                         //
1722                         // this reduces packet loss impact on gameplay.
1723                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1724                         {
1725                                 // don't repeat any stale moves
1726                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1727                                         continue;
1728                                 // 5/9 bytes
1729                                 MSG_WriteByte (&buf, clc_move);
1730                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1731                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1732                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1733                                 // 6 bytes
1734                                 for (i = 0;i < 3;i++)
1735                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1736                                 // 6 bytes
1737                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1738                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1739                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1740                                 // 5 bytes
1741                                 MSG_WriteLong (&buf, cmd->buttons);
1742                                 MSG_WriteByte (&buf, cmd->impulse);
1743                                 // PRYDON_CLIENTCURSOR
1744                                 // 30 bytes
1745                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1746                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1747                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1748                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1749                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1750                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1751                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1752                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1753                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1754                         }
1755                         break;
1756                 case PROTOCOL_UNKNOWN:
1757                         break;
1758                 }
1759         }
1760
1761         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
1762         {
1763                 // ack the last few frame numbers
1764                 // (redundent to improve handling of client->server packet loss)
1765                 // for LATESTFRAMENUMS == 3 case this is 15 bytes
1766                 for (i = 0;i < LATESTFRAMENUMS;i++)
1767                 {
1768                         if (cl.latestframenums[i] > 0)
1769                         {
1770                                 if (developer_networkentities.integer >= 10)
1771                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
1772                                 MSG_WriteByte(&buf, clc_ackframe);
1773                                 MSG_WriteLong(&buf, cl.latestframenums[i]);
1774                         }
1775                 }
1776         }
1777
1778         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1779         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1780
1781         // acknowledge any recently received data blocks
1782         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
1783         {
1784                 MSG_WriteByte(&buf, clc_ackdownloaddata);
1785                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
1786                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
1787                 cls.dp_downloadack[i].start = 0;
1788                 cls.dp_downloadack[i].size = 0;
1789         }
1790
1791         // send the reliable message (forwarded commands) if there is one
1792         if (buf.cursize || cls.netcon->message.cursize)
1793                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
1794
1795         // update the cl.movecmd array which holds the most recent moves,
1796         // because we now need a new slot for the next input
1797         for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
1798                 cl.movecmd[i] = cl.movecmd[i-1];
1799         cl.movecmd[0].msec = 0;
1800         cl.movecmd[0].frametime = 0;
1801
1802         // clear button 'click' states
1803         in_attack.state  &= ~2;
1804         in_jump.state    &= ~2;
1805         in_button3.state &= ~2;
1806         in_button4.state &= ~2;
1807         in_button5.state &= ~2;
1808         in_button6.state &= ~2;
1809         in_button7.state &= ~2;
1810         in_button8.state &= ~2;
1811         in_use.state     &= ~2;
1812         in_button9.state  &= ~2;
1813         in_button10.state &= ~2;
1814         in_button11.state &= ~2;
1815         in_button12.state &= ~2;
1816         in_button13.state &= ~2;
1817         in_button14.state &= ~2;
1818         in_button15.state &= ~2;
1819         in_button16.state &= ~2;
1820         // clear impulse
1821         in_impulse = 0;
1822
1823         if (cls.netcon->message.overflowed)
1824         {
1825                 Con_Print("CL_SendMove: lost server connection\n");
1826                 CL_Disconnect();
1827                 Host_ShutdownServer();
1828         }
1829 }
1830
1831 /*
1832 ============
1833 CL_InitInput
1834 ============
1835 */
1836 void CL_InitInput (void)
1837 {
1838         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
1839         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
1840         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
1841         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
1842         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
1843         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
1844         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
1845         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
1846         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
1847         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
1848         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
1849         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
1850         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
1851         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
1852         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
1853         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
1854         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
1855         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
1856         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
1857         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
1858         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
1859         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
1860         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
1861         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
1862         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
1863         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
1864         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
1865         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
1866         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
1867         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
1868         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
1869         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
1870         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
1871
1872         // LordHavoc: added use button
1873         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
1874         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
1875
1876         // LordHavoc: added 6 new buttons
1877         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
1878         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
1879         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
1880         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
1881         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
1882         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
1883         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
1884         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
1885         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
1886         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
1887         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
1888         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
1889         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
1890         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
1891         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
1892         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
1893         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
1894         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
1895         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
1896         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
1897         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
1898         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
1899         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
1900         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
1901         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
1902         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
1903         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
1904         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
1905
1906         // LordHavoc: added bestweapon command
1907         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
1908         Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
1909         Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
1910
1911         Cvar_RegisterVariable(&cl_movement);
1912         Cvar_RegisterVariable(&cl_movement_minping);
1913         Cvar_RegisterVariable(&cl_movement_track_canjump);
1914         Cvar_RegisterVariable(&cl_movement_maxspeed);
1915         Cvar_RegisterVariable(&cl_movement_maxairspeed);
1916         Cvar_RegisterVariable(&cl_movement_stopspeed);
1917         Cvar_RegisterVariable(&cl_movement_friction);
1918         Cvar_RegisterVariable(&cl_movement_wallfriction);
1919         Cvar_RegisterVariable(&cl_movement_waterfriction);
1920         Cvar_RegisterVariable(&cl_movement_edgefriction);
1921         Cvar_RegisterVariable(&cl_movement_stepheight);
1922         Cvar_RegisterVariable(&cl_movement_accelerate);
1923         Cvar_RegisterVariable(&cl_movement_airaccelerate);
1924         Cvar_RegisterVariable(&cl_movement_wateraccelerate);
1925         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
1926         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
1927         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
1928
1929         Cvar_RegisterVariable(&in_pitch_min);
1930         Cvar_RegisterVariable(&in_pitch_max);
1931         Cvar_RegisterVariable(&m_filter);
1932         Cvar_RegisterVariable(&m_accelerate);
1933         Cvar_RegisterVariable(&m_accelerate_minspeed);
1934         Cvar_RegisterVariable(&m_accelerate_maxspeed);
1935         Cvar_RegisterVariable(&m_accelerate_filter);
1936
1937         Cvar_RegisterVariable(&cl_netfps);
1938         Cvar_RegisterVariable(&cl_netrepeatinput);
1939         Cvar_RegisterVariable(&cl_netimmediatebuttons);
1940
1941         Cvar_RegisterVariable(&cl_nodelta);
1942 }
1943