TRANSPARENTSORT_HUD,
}dptransparentsortcategory_t;
-typedef struct q3shaderinfo_s
+typedef struct shader_s
{
char name[Q3PATHLENGTH];
#define Q3SHADERINFO_COMPARE_START surfaceparms
float rtlightambient;
#define Q3SHADERINFO_COMPARE_END rtlightambient
}
-q3shaderinfo_t;
+shader_t;
typedef struct texture_shaderpass_s
{
typedef struct texture_s
{
- // q1bsp
// name
- //char name[16];
+ char name[64];
+
+ // q1bsp
// size
unsigned int width, height;
// SURF_ flags
// MATERIALFLAG_MODELLIGHT uses these parameters
float render_modellight_ambient[3];
float render_modellight_diffuse[3];
- float render_modellight_lightdir[3];
+ float render_modellight_lightdir_world[3];
+ float render_modellight_lightdir_local[3];
float render_modellight_specular[3];
// lightmap rendering (not MATERIALFLAG_MODELLIGHT)
float render_lightmap_ambient[3];
int customblendfunc[2];
// q3bsp
- char name[64];
int surfaceflags;
int supercontents;
struct q3deffect_s *effect; // q3bsp
// mesh information for collisions (only used by q3bsp curves)
int num_firstcollisiontriangle;
- int *deprecatedq3data_collisionelement3i; // q3bsp
- float *deprecatedq3data_collisionvertex3f; // q3bsp
- float *deprecatedq3data_collisionbbox6f; // collision optimization - contains combined bboxes of every data_collisionstride triangles
- float *deprecatedq3data_bbox6f; // collision optimization - contains combined bboxes of every data_collisionstride triangles
// surfaces own ranges of vertices and triangles in the model->surfmesh
int num_triangles; // number of triangles
// mesh information for collisions (only used by q3bsp curves)
int num_collisiontriangles; // q3bsp
int num_collisionvertices; // q3bsp
- int deprecatedq3num_collisionbboxstride;
- int deprecatedq3num_bboxstride;
- // FIXME: collisionmarkframe should be kept in a separate array
- int deprecatedq3collisionmarkframe; // q3bsp // don't collide twice in one trace
// used by Mod_Mesh_Finalize when building sortedmodelsurfaces
qboolean included;
}
model_brushq1_t;
-typedef struct model_brushq2_s
-{
- int dummy; // MSVC can't handle an empty struct
-}
-model_brushq2_t;
-
typedef struct model_brushq3_s
{
int num_models;
model_sprite_t sprite;
model_brush_t brush;
model_brushq1_t brushq1;
- model_brushq2_t brushq2;
model_brushq3_t brushq3;
// flags this model for offseting sounds to the model center (used by brush models)
int soundfromcenter;
// if set, the model contains light information (lightmap, or vertexlight)
qboolean lit;
float lightmapscale;
+
+ qboolean nolerp;
}
dp_model_t;
// model loading
extern dp_model_t *loadmodel;
extern unsigned char *mod_base;
+
+typedef struct modloader_s
+{
+ const char *extension;
+ const char *header;
+ size_t headersize; // The header might not be NULL terminated
+ void (*Load)(dp_model_t *, void *, void *);
+} modloader_t;
+
// sky/water subdivision
//extern cvar_t gl_subdivide_size;
// texture fullbrights
void Mod_FreeQ3Shaders(void);
void Mod_LoadQ3Shaders(void);
-q3shaderinfo_t *Mod_LookupQ3Shader(const char *name);
+shader_t *Mod_LookupQ3Shader(const char *name);
qboolean Mod_LoadTextureFromQ3Shader(mempool_t *mempool, const char *modelname, texture_t *texture, const char *name, qboolean warnmissing, qboolean fallback, int defaulttexflags, int defaultmaterialflags);
texture_shaderpass_t *Mod_CreateShaderPass(mempool_t *mempool, skinframe_t *skinframe);
texture_shaderpass_t *Mod_CreateShaderPassFromQ3ShaderLayer(mempool_t *mempool, const char *modelname, q3shaderinfo_layer_t *layer, int layerindex, int texflags, const char *texturename);
// a lot of model formats use the Q1BSP code, so here are the prototypes...
struct entity_render_s;
-void R_Q1BSP_DrawAddWaterPlanes(struct entity_render_s *ent);
-void R_Q1BSP_DrawSky(struct entity_render_s *ent);
-void R_Q1BSP_Draw(struct entity_render_s *ent);
-void R_Q1BSP_DrawDepth(struct entity_render_s *ent);
-void R_Q1BSP_DrawDebug(struct entity_render_s *ent);
-void R_Q1BSP_DrawPrepass(struct entity_render_s *ent);
-void R_Q1BSP_GetLightInfo(struct entity_render_s *ent, vec3_t relativelightorigin, float lightradius, vec3_t outmins, vec3_t outmaxs, int *outleaflist, unsigned char *outleafpvs, int *outnumleafspointer, int *outsurfacelist, unsigned char *outsurfacepvs, int *outnumsurfacespointer, unsigned char *outshadowtrispvs, unsigned char *outlighttrispvs, unsigned char *visitingleafpvs, int numfrustumplanes, const mplane_t *frustumplanes, qboolean noocclusion);
-void R_Q1BSP_CompileShadowMap(struct entity_render_s *ent, vec3_t relativelightorigin, vec3_t relativelightdirection, float lightradius, int numsurfaces, const int *surfacelist);
-void R_Q1BSP_DrawShadowMap(int side, struct entity_render_s *ent, const vec3_t relativelightorigin, const vec3_t relativelightdirection, float lightradius, int modelnumsurfaces, const int *modelsurfacelist, const unsigned char *surfacesides, const vec3_t lightmins, const vec3_t lightmaxs);
-void R_Q1BSP_DrawLight(struct entity_render_s *ent, int numsurfaces, const int *surfacelist, const unsigned char *trispvs);
+void R_Mod_DrawAddWaterPlanes(struct entity_render_s *ent);
+void R_Mod_DrawSky(struct entity_render_s *ent);
+void R_Mod_Draw(struct entity_render_s *ent);
+void R_Mod_DrawDepth(struct entity_render_s *ent);
+void R_Mod_DrawDebug(struct entity_render_s *ent);
+void R_Mod_DrawPrepass(struct entity_render_s *ent);
+void R_Mod_GetLightInfo(struct entity_render_s *ent, vec3_t relativelightorigin, float lightradius, vec3_t outmins, vec3_t outmaxs, int *outleaflist, unsigned char *outleafpvs, int *outnumleafspointer, int *outsurfacelist, unsigned char *outsurfacepvs, int *outnumsurfacespointer, unsigned char *outshadowtrispvs, unsigned char *outlighttrispvs, unsigned char *visitingleafpvs, int numfrustumplanes, const mplane_t *frustumplanes, qboolean noocclusion);
+void R_Mod_CompileShadowMap(struct entity_render_s *ent, vec3_t relativelightorigin, vec3_t relativelightdirection, float lightradius, int numsurfaces, const int *surfacelist);
+void R_Mod_DrawShadowMap(int side, struct entity_render_s *ent, const vec3_t relativelightorigin, const vec3_t relativelightdirection, float lightradius, int modelnumsurfaces, const int *modelsurfacelist, const unsigned char *surfacesides, const vec3_t lightmins, const vec3_t lightmaxs);
+void R_Mod_DrawLight(struct entity_render_s *ent, int numsurfaces, const int *surfacelist, const unsigned char *trispvs);
// dynamic mesh building (every frame) for debugging and other uses
void Mod_Mesh_Create(dp_model_t *mod, const char *name);
void Mod_SpriteInit(void);
// loaders
+void Mod_2PSB_Load(dp_model_t *mod, void *buffer, void *bufferend);
+void Mod_BSP2_Load(dp_model_t *mod, void *buffer, void *bufferend);
+void Mod_HLBSP_Load(dp_model_t *mod, void *buffer, void *bufferend);
void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend);
void Mod_IBSP_Load(dp_model_t *mod, void *buffer, void *bufferend);
void Mod_MAP_Load(dp_model_t *mod, void *buffer, void *bufferend);
projects / xonotic / darkplaces.git / blobdiff