X-Git-Url: http://de.git.xonotic.org/?a=blobdiff_plain;f=model_brush.c;h=5b1b3712ac30849cc85b2dbca83f45f367fa74f9;hb=494fb0738e541883371b17f31c2a94471476c6f5;hp=ac8f68a2335cb1cb6c3a4214e540843aad635e1a;hpb=f5a3bb717b4692a49b1df7d6c5dddf7d67ad9e4f;p=xonotic%2Fdarkplaces.git

diff --git a/model_brush.c b/model_brush.c
index ac8f68a2..5b1b3712 100644
--- a/model_brush.c
+++ b/model_brush.c
@@ -27,8 +27,8 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
 
 //cvar_t r_subdivide_size = {CVAR_SAVE, "r_subdivide_size", "128", "how large water polygons should be (smaller values produce more polygons which give better warping effects)"};
+cvar_t mod_bsp_portalize = {0, "mod_bsp_portalize", "0", "enables portal generation from BSP tree (may take several seconds per map), used by r_drawportals, r_useportalculling, r_shadow_realtime_world_compileportalculling, sv_cullentities_portal - all of which are off by default"};
 cvar_t r_novis = {0, "r_novis", "0", "draws whole level, see also sv_cullentities_pvs 0"};
-cvar_t r_picmipworld = {CVAR_SAVE, "r_picmipworld", "1", "whether gl_picmip shall apply to world textures too"};
 cvar_t r_nosurftextures = {0, "r_nosurftextures", "0", "pretends there was no texture lump found in the q1bsp/hlbsp loading (useful for debugging this rare case)"};
 cvar_t r_subdivisions_tolerance = {0, "r_subdivisions_tolerance", "4", "maximum error tolerance on curve subdivision for rendering purposes (in other words, the curves will be given as many polygons as necessary to represent curves at this quality)"};
 cvar_t r_subdivisions_mintess = {0, "r_subdivisions_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
@@ -39,12 +39,20 @@ cvar_t r_subdivisions_collision_mintess = {0, "r_subdivisions_collision_mintess"
 cvar_t r_subdivisions_collision_maxtess = {0, "r_subdivisions_collision_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
 cvar_t r_subdivisions_collision_maxvertices = {0, "r_subdivisions_collision_maxvertices", "4225", "maximum vertices allowed per subdivided curve"};
 cvar_t mod_q3bsp_curves_collisions = {0, "mod_q3bsp_curves_collisions", "1", "enables collisions with curves (SLOW)"};
-cvar_t mod_q3bsp_curves_collisions_stride = {0, "mod_q3bsp_curves_collisions_stride", "16", "collisions against curves: optimize performance by doing a combined collision check for this triangle amount first"};
-cvar_t mod_q3bsp_curves_stride = {0, "mod_q3bsp_curves_stride", "16", "particle effect collisions against curves: optimize performance by doing a combined collision check for this triangle amount first"};
+cvar_t mod_q3bsp_curves_collisions_stride = {0, "mod_q3bsp_curves_collisions_stride", "16", "collisions against curves: optimize performance by doing a combined collision check for this triangle amount first (-1 avoids any box tests)"};
+cvar_t mod_q3bsp_curves_stride = {0, "mod_q3bsp_curves_stride", "16", "particle effect collisions against curves: optimize performance by doing a combined collision check for this triangle amount first (-1 avoids any box tests)"};
 cvar_t mod_q3bsp_optimizedtraceline = {0, "mod_q3bsp_optimizedtraceline", "1", "whether to use optimized traceline code for line traces (as opposed to tracebox code)"};
 cvar_t mod_q3bsp_debugtracebrush = {0, "mod_q3bsp_debugtracebrush", "0", "selects different tracebrush bsp recursion algorithms (for debugging purposes only)"};
 cvar_t mod_q3bsp_lightmapmergepower = {CVAR_SAVE, "mod_q3bsp_lightmapmergepower", "4", "merges the quake3 128x128 lightmap textures into larger lightmap group textures to speed up rendering, 1 = 256x256, 2 = 512x512, 3 = 1024x1024, 4 = 2048x2048, 5 = 4096x4096, ..."};
 cvar_t mod_q3bsp_nolightmaps = {CVAR_SAVE, "mod_q3bsp_nolightmaps", "0", "do not load lightmaps in Q3BSP maps (to save video RAM, but be warned: it looks ugly)"};
+cvar_t mod_q3bsp_tracelineofsight_brushes = {0, "mod_q3bsp_tracelineofsight_brushes", "0", "enables culling of entities behind detail brushes, curves, etc"};
+cvar_t mod_q3shader_default_offsetmapping = {CVAR_SAVE, "mod_q3shader_default_offsetmapping", "1", "use offsetmapping by default on all surfaces"};
+cvar_t mod_q3shader_default_polygonfactor = {0, "mod_q3shader_default_polygonfactor", "0", "biases depth values of 'polygonoffset' shaders to prevent z-fighting artifacts"};
+cvar_t mod_q3shader_default_polygonoffset = {0, "mod_q3shader_default_polygonoffset", "-2", "biases depth values of 'polygonoffset' shaders to prevent z-fighting artifacts"};
+
+cvar_t mod_q1bsp_polygoncollisions = {0, "mod_q1bsp_polygoncollisions", "0", "disables use of precomputed cliphulls and instead collides with polygons (uses Bounding Interval Hierarchy optimizations)"};
+cvar_t mod_collision_bih = {0, "mod_collision_bih", "1", "enables use of generated Bounding Interval Hierarchy tree instead of compiled bsp tree in collision code"};
+cvar_t mod_recalculatenodeboxes = {0, "mod_recalculatenodeboxes", "1", "enables use of generated node bounding boxes based on BSP tree portal reconstruction, rather than the node boxes supplied by the map compiler"};
 
 static texture_t mod_q1bsp_texture_solid;
 static texture_t mod_q1bsp_texture_sky;
@@ -55,8 +63,8 @@ static texture_t mod_q1bsp_texture_water;
 void Mod_BrushInit(void)
 {
 //	Cvar_RegisterVariable(&r_subdivide_size);
+	Cvar_RegisterVariable(&mod_bsp_portalize);
 	Cvar_RegisterVariable(&r_novis);
-	Cvar_RegisterVariable(&r_picmipworld);
 	Cvar_RegisterVariable(&r_nosurftextures);
 	Cvar_RegisterVariable(&r_subdivisions_tolerance);
 	Cvar_RegisterVariable(&r_subdivisions_mintess);
@@ -73,6 +81,13 @@ void Mod_BrushInit(void)
 	Cvar_RegisterVariable(&mod_q3bsp_debugtracebrush);
 	Cvar_RegisterVariable(&mod_q3bsp_lightmapmergepower);
 	Cvar_RegisterVariable(&mod_q3bsp_nolightmaps);
+	Cvar_RegisterVariable(&mod_q3bsp_tracelineofsight_brushes);
+	Cvar_RegisterVariable(&mod_q3shader_default_offsetmapping);
+	Cvar_RegisterVariable(&mod_q3shader_default_polygonfactor);
+	Cvar_RegisterVariable(&mod_q3shader_default_polygonoffset);
+	Cvar_RegisterVariable(&mod_q1bsp_polygoncollisions);
+	Cvar_RegisterVariable(&mod_collision_bih);
+	Cvar_RegisterVariable(&mod_recalculatenodeboxes);
 
 	memset(&mod_q1bsp_texture_solid, 0, sizeof(mod_q1bsp_texture_solid));
 	strlcpy(mod_q1bsp_texture_solid.name, "solid" , sizeof(mod_q1bsp_texture_solid.name));
@@ -142,7 +157,7 @@ static int Mod_Q1BSP_FindBoxClusters(dp_model_t *model, const vec3_t mins, const
 	mnode_t *node, *nodestack[1024];
 	if (!model->brush.num_pvsclusters)
 		return -1;
-	node = model->brush.data_nodes;
+	node = model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode;
 	for (;;)
 	{
 #if 1
@@ -207,7 +222,7 @@ static int Mod_Q1BSP_BoxTouchingPVS(dp_model_t *model, const unsigned char *pvs,
 	mnode_t *node, *nodestack[1024];
 	if (!model->brush.num_pvsclusters)
 		return true;
-	node = model->brush.data_nodes;
+	node = model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode;
 	for (;;)
 	{
 #if 1
@@ -278,7 +293,7 @@ static int Mod_Q1BSP_BoxTouchingLeafPVS(dp_model_t *model, const unsigned char *
 	mnode_t *node, *nodestack[1024];
 	if (!model->brush.num_leafs)
 		return true;
-	node = model->brush.data_nodes;
+	node = model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode;
 	for (;;)
 	{
 #if 1
@@ -349,7 +364,7 @@ static int Mod_Q1BSP_BoxTouchingVisibleLeafs(dp_model_t *model, const unsigned c
 	mnode_t *node, *nodestack[1024];
 	if (!model->brush.num_leafs)
 		return true;
-	node = model->brush.data_nodes;
+	node = model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode;
 	for (;;)
 	{
 #if 1
@@ -520,17 +535,17 @@ static void Mod_Q1BSP_FindNonSolidLocation_r_Leaf(findnonsolidlocationinfo_t *in
 		surface = info->model->data_surfaces + *mark;
 		if (surface->texture->supercontents & SUPERCONTENTS_SOLID)
 		{
-			if(surface->num_bboxstride)
+			if(surface->deprecatedq3num_bboxstride > 0)
 			{
 				int i, cnt, tri;
-				cnt = (surface->num_triangles + surface->num_bboxstride - 1) / surface->num_bboxstride;
+				cnt = (surface->num_triangles + surface->deprecatedq3num_bboxstride - 1) / surface->deprecatedq3num_bboxstride;
 				for(i = 0; i < cnt; ++i)
 				{
-					if(BoxesOverlap(surface->data_bbox6f + i * 6, surface->data_bbox6f + i * 6 + 3, info->absmin, info->absmax))
+					if(BoxesOverlap(surface->deprecatedq3data_bbox6f + i * 6, surface->deprecatedq3data_bbox6f + i * 6 + 3, info->absmin, info->absmax))
 					{
-						for(k = 0; k < surface->num_bboxstride; ++k)
+						for(k = 0; k < surface->deprecatedq3num_bboxstride; ++k)
 						{
-							tri = i * surface->num_bboxstride + k;
+							tri = i * surface->deprecatedq3num_bboxstride + k;
 							if(tri >= surface->num_triangles)
 								break;
 							Mod_Q1BSP_FindNonSolidLocation_r_Triangle(info, surface, tri);
@@ -851,7 +866,7 @@ static int Mod_Q1BSP_RecursiveHullCheckPoint(RecursiveHullCheckTraceInfo_t *t, i
 }
 //#endif
 
-static void Mod_Q1BSP_TracePoint(struct model_s *model, int frame, trace_t *trace, const vec3_t start, int hitsupercontentsmask)
+static void Mod_Q1BSP_TracePoint(struct model_s *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, int hitsupercontentsmask)
 {
 	RecursiveHullCheckTraceInfo_t rhc;
 
@@ -867,13 +882,13 @@ static void Mod_Q1BSP_TracePoint(struct model_s *model, int frame, trace_t *trac
 	Mod_Q1BSP_RecursiveHullCheckPoint(&rhc, rhc.hull->firstclipnode);
 }
 
-static void Mod_Q1BSP_TraceLine(struct model_s *model, int frame, trace_t *trace, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
+static void Mod_Q1BSP_TraceLine(struct model_s *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
 {
 	RecursiveHullCheckTraceInfo_t rhc;
 
 	if (VectorCompare(start, end))
 	{
-		Mod_Q1BSP_TracePoint(model, frame, trace, start, hitsupercontentsmask);
+		Mod_Q1BSP_TracePoint(model, frameblend, skeleton, trace, start, hitsupercontentsmask);
 		return;
 	}
 
@@ -919,7 +934,7 @@ static void Mod_Q1BSP_TraceLine(struct model_s *model, int frame, trace_t *trace
 #endif
 }
 
-static void Mod_Q1BSP_TraceBox(struct model_s *model, int frame, trace_t *trace, const vec3_t start, const vec3_t boxmins, const vec3_t boxmaxs, const vec3_t end, int hitsupercontentsmask)
+static void Mod_Q1BSP_TraceBox(struct model_s *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, const vec3_t boxmins, const vec3_t boxmaxs, const vec3_t end, int hitsupercontentsmask)
 {
 	// this function currently only supports same size start and end
 	double boxsize[3];
@@ -928,9 +943,9 @@ static void Mod_Q1BSP_TraceBox(struct model_s *model, int frame, trace_t *trace,
 	if (VectorCompare(boxmins, boxmaxs))
 	{
 		if (VectorCompare(start, end))
-			Mod_Q1BSP_TracePoint(model, frame, trace, start, hitsupercontentsmask);
+			Mod_Q1BSP_TracePoint(model, frameblend, skeleton, trace, start, hitsupercontentsmask);
 		else
-			Mod_Q1BSP_TraceLine(model, frame, trace, start, end, hitsupercontentsmask);
+			Mod_Q1BSP_TraceLine(model, frameblend, skeleton, trace, start, end, hitsupercontentsmask);
 		return;
 	}
 
@@ -1015,11 +1030,13 @@ static int Mod_Q1BSP_PointSuperContents(struct model_s *model, int frame, const
 	return Mod_Q1BSP_SuperContentsFromNativeContents(NULL, num);
 }
 
-void Collision_ClipTrace_Box(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask, int boxsupercontents, int boxq3surfaceflags, texture_t *boxtexture)
+void Collision_ClipTrace_Box(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask, int boxsupercontents, int boxq3surfaceflags, const texture_t *boxtexture)
 {
 #if 1
 	colbrushf_t cbox;
 	colplanef_t cbox_planes[6];
+	cbox.isaabb = true;
+	cbox.hasaabbplanes = true;
 	cbox.supercontents = boxsupercontents;
 	cbox.numplanes = 6;
 	cbox.numpoints = 0;
@@ -1119,7 +1136,7 @@ void Collision_ClipTrace_Box(trace_t *trace, const vec3_t cmins, const vec3_t cm
 #endif
 }
 
-void Collision_ClipTrace_Point(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, int hitsupercontentsmask, int boxsupercontents, int boxq3surfaceflags, texture_t *boxtexture)
+void Collision_ClipTrace_Point(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, int hitsupercontentsmask, int boxsupercontents, int boxq3surfaceflags, const texture_t *boxtexture)
 {
 	memset(trace, 0, sizeof(trace_t));
 	trace->fraction = 1;
@@ -1135,74 +1152,11 @@ void Collision_ClipTrace_Point(trace_t *trace, const vec3_t cmins, const vec3_t
 	}
 }
 
-static int Mod_Q1BSP_TraceLineOfSight_RecursiveNodeCheck(mnode_t *node, double p1[3], double p2[3])
-{
-	double t1, t2;
-	double midf, mid[3];
-	int ret, side;
-
-	// check for empty
-	while (node->plane)
-	{
-		// find the point distances
-		mplane_t *plane = node->plane;
-		if (plane->type < 3)
-		{
-			t1 = p1[plane->type] - plane->dist;
-			t2 = p2[plane->type] - plane->dist;
-		}
-		else
-		{
-			t1 = DotProduct (plane->normal, p1) - plane->dist;
-			t2 = DotProduct (plane->normal, p2) - plane->dist;
-		}
-
-		if (t1 < 0)
-		{
-			if (t2 < 0)
-			{
-				node = node->children[1];
-				continue;
-			}
-			side = 1;
-		}
-		else
-		{
-			if (t2 >= 0)
-			{
-				node = node->children[0];
-				continue;
-			}
-			side = 0;
-		}
-
-		midf = t1 / (t1 - t2);
-		VectorLerp(p1, midf, p2, mid);
-
-		// recurse both sides, front side first
-		// return 2 if empty is followed by solid (hit something)
-		// do not return 2 if both are solid or both empty,
-		// or if start is solid and end is empty
-		// as these degenerate cases usually indicate the eye is in solid and
-		// should see the target point anyway
-		ret = Mod_Q1BSP_TraceLineOfSight_RecursiveNodeCheck(node->children[side    ], p1, mid);
-		if (ret != 0)
-			return ret;
-		ret = Mod_Q1BSP_TraceLineOfSight_RecursiveNodeCheck(node->children[side ^ 1], mid, p2);
-		if (ret != 1)
-			return ret;
-		return 2;
-	}
-	return ((mleaf_t *)node)->clusterindex < 0;
-}
-
 static qboolean Mod_Q1BSP_TraceLineOfSight(struct model_s *model, const vec3_t start, const vec3_t end)
 {
-	// this function currently only supports same size start and end
-	double tracestart[3], traceend[3];
-	VectorCopy(start, tracestart);
-	VectorCopy(end, traceend);
-	return Mod_Q1BSP_TraceLineOfSight_RecursiveNodeCheck(model->brush.data_nodes, tracestart, traceend) != 2;
+	trace_t trace;
+	model->TraceLine(model, NULL, NULL, &trace, start, end, SUPERCONTENTS_VISBLOCKERMASK);
+	return trace.fraction == 1;
 }
 
 static int Mod_Q1BSP_LightPoint_RecursiveBSPNode(dp_model_t *model, vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal, const mnode_t *node, float x, float y, float startz, float endz)
@@ -1268,7 +1222,7 @@ loc0:
 			surface = model->data_surfaces + node->firstsurface;
 			for (i = 0;i < node->numsurfaces;i++, surface++)
 			{
-				if (!(surface->texture->basematerialflags & MATERIALFLAG_WALL) || !surface->lightmapinfo->samples)
+				if (!(surface->texture->basematerialflags & MATERIALFLAG_WALL) || !surface->lightmapinfo || !surface->lightmapinfo->samples)
 					continue;	// no lightmaps
 
 				// location we want to sample in the lightmap
@@ -1382,8 +1336,11 @@ A sky texture is 256*128, with the right side being a masked overlay
 */
 void R_Q1BSP_LoadSplitSky (unsigned char *src, int width, int height, int bytesperpixel)
 {
-	int i, j;
-	unsigned solidpixels[128*128], alphapixels[128*128];
+	int x, y;
+	int w = width/2;
+	int h = height;
+	unsigned int *solidpixels = (unsigned int *)Mem_Alloc(tempmempool, w*h*sizeof(unsigned char[4]));
+	unsigned int *alphapixels = (unsigned int *)Mem_Alloc(tempmempool, w*h*sizeof(unsigned char[4]));
 
 	// allocate a texture pool if we need it
 	if (loadmodel->texturepool == NULL && cls.state != ca_dedicated)
@@ -1391,12 +1348,12 @@ void R_Q1BSP_LoadSplitSky (unsigned char *src, int width, int height, int bytesp
 
 	if (bytesperpixel == 4)
 	{
-		for (i = 0;i < 128;i++)
+		for (y = 0;y < h;y++)
 		{
-			for (j = 0;j < 128;j++)
+			for (x = 0;x < w;x++)
 			{
-				solidpixels[(i*128) + j] = ((unsigned *)src)[i*256+j+128];
-				alphapixels[(i*128) + j] = ((unsigned *)src)[i*256+j];
+				solidpixels[y*w+x] = ((unsigned *)src)[y*width+x+w];
+				alphapixels[y*w+x] = ((unsigned *)src)[y*width+x];
 			}
 		}
 	}
@@ -1412,33 +1369,35 @@ void R_Q1BSP_LoadSplitSky (unsigned char *src, int width, int height, int bytesp
 		}
 		bgra;
 		r = g = b = 0;
-		for (i = 0;i < 128;i++)
+		for (y = 0;y < h;y++)
 		{
-			for (j = 0;j < 128;j++)
+			for (x = 0;x < w;x++)
 			{
-				p = src[i*256 + j + 128];
+				p = src[x*width+y+w];
 				r += palette_rgb[p][0];
 				g += palette_rgb[p][1];
 				b += palette_rgb[p][2];
 			}
 		}
-		bgra.b[2] = r/(128*128);
-		bgra.b[1] = g/(128*128);
-		bgra.b[0] = b/(128*128);
+		bgra.b[2] = r/(w*h);
+		bgra.b[1] = g/(w*h);
+		bgra.b[0] = b/(w*h);
 		bgra.b[3] = 0;
-		for (i = 0;i < 128;i++)
+		for (y = 0;y < h;y++)
 		{
-			for (j = 0;j < 128;j++)
+			for (x = 0;x < w;x++)
 			{
-				solidpixels[(i*128) + j] = palette_bgra_complete[src[i*256 + j + 128]];
-				p = src[i*256 + j];
-				alphapixels[(i*128) + j] = p ? palette_bgra_complete[p] : bgra.i;
+				solidpixels[y*w+x] = palette_bgra_complete[src[y*width+x+w]];
+				p = src[y*width+x];
+				alphapixels[y*w+x] = p ? palette_bgra_complete[p] : bgra.i;
 			}
 		}
 	}
 
-	loadmodel->brush.solidskytexture = R_LoadTexture2D(loadmodel->texturepool, "sky_solidtexture", 128, 128, (unsigned char *) solidpixels, TEXTYPE_BGRA, TEXF_PRECACHE, NULL);
-	loadmodel->brush.alphaskytexture = R_LoadTexture2D(loadmodel->texturepool, "sky_alphatexture", 128, 128, (unsigned char *) alphapixels, TEXTYPE_BGRA, TEXF_ALPHA | TEXF_PRECACHE, NULL);
+	loadmodel->brush.solidskyskinframe = R_SkinFrame_LoadInternalBGRA("sky_solidtexture", 0         , (unsigned char *) solidpixels, w, h);
+	loadmodel->brush.alphaskyskinframe = R_SkinFrame_LoadInternalBGRA("sky_alphatexture", TEXF_ALPHA, (unsigned char *) alphapixels, w, h);
+	Mem_Free(solidpixels);
+	Mem_Free(alphapixels);
 }
 
 static void Mod_Q1BSP_LoadTextures(lump_t *l)
@@ -1513,6 +1472,10 @@ static void Mod_Q1BSP_LoadTextures(lump_t *l)
 		tx->reflectfactor = 1;
 		Vector4Set(tx->reflectcolor4f, 1, 1, 1, 1);
 		tx->r_water_wateralpha = 1;
+		tx->offsetmapping = OFFSETMAPPING_OFF;
+		tx->offsetscale = 1;
+		tx->specularscalemod = 1;
+		tx->specularpowermod = 1;
 	}
 
 	if (!m)
@@ -1617,10 +1580,12 @@ static void Mod_Q1BSP_LoadTextures(lump_t *l)
 		if (cls.state != ca_dedicated)
 		{
 			// LordHavoc: HL sky textures are entirely different than quake
-			if (!loadmodel->brush.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
+			if (!loadmodel->brush.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == mtheight * 2)
 			{
-				data = loadimagepixelsbgra(tx->name, false, false);
-				if (data && image_width == 256 && image_height == 128)
+				data = loadimagepixelsbgra(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s/%s", mapname, tx->name), false, false, r_texture_convertsRGB_skin.integer != 0, NULL);
+				if (!data)
+					data = loadimagepixelsbgra(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s", tx->name), false, false, r_texture_convertsRGB_skin.integer != 0, NULL);
+				if (data && image_width == image_height * 2)
 				{
 					R_Q1BSP_LoadSplitSky(data, image_width, image_height, 4);
 					Mem_Free(data);
@@ -1630,9 +1595,9 @@ static void Mod_Q1BSP_LoadTextures(lump_t *l)
 			}
 			else
 			{
-				skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s/%s", mapname, tx->name), TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS, false);
+				skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s/%s", mapname, tx->name), TEXF_ALPHA | TEXF_MIPMAP | TEXF_ISWORLD | TEXF_PICMIP | TEXF_COMPRESS, false);
 				if (!skinframe)
-					skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s", tx->name), TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS, false);
+					skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s", tx->name), TEXF_ALPHA | TEXF_MIPMAP | TEXF_ISWORLD | TEXF_PICMIP | TEXF_COMPRESS, false);
 				if (!skinframe)
 				{
 					// did not find external texture, load it from the bsp or wad3
@@ -1649,13 +1614,13 @@ static void Mod_Q1BSP_LoadTextures(lump_t *l)
 						{
 							tx->width = image_width;
 							tx->height = image_height;
-							skinframe = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0), pixels, image_width, image_height);
+							skinframe = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_ALPHA | TEXF_MIPMAP | TEXF_ISWORLD | TEXF_PICMIP, pixels, image_width, image_height);
 						}
 						if (freepixels)
 							Mem_Free(freepixels);
 					}
 					else if (mtdata) // texture included
-						skinframe = R_SkinFrame_LoadInternalQuake(tx->name, TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0), false, r_fullbrights.integer, mtdata, tx->width, tx->height);
+						skinframe = R_SkinFrame_LoadInternalQuake(tx->name, TEXF_MIPMAP | TEXF_ISWORLD | TEXF_PICMIP, false, r_fullbrights.integer, mtdata, tx->width, tx->height);
 				}
 				// if skinframe is still NULL the "missing" texture will be used
 				if (skinframe)
@@ -1670,7 +1635,7 @@ static void Mod_Q1BSP_LoadTextures(lump_t *l)
 				{
 					// replace the texture with transparent black
 					Vector4Set(zero, 128, 128, 128, 128);
-					tx->skinframes[0] = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_MIPMAP | TEXF_PRECACHE | TEXF_ALPHA, zero, 1, 1);
+					tx->skinframes[0] = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_MIPMAP | TEXF_ALPHA, zero, 1, 1);
 					tx->basematerialflags |= MATERIALFLAG_NOSHADOW | MATERIALFLAG_ADD | MATERIALFLAG_BLENDED | MATERIALFLAG_REFLECTION;
 				}
 				else if (!strncmp(tx->name,"*lava",5)
@@ -1679,20 +1644,20 @@ static void Mod_Q1BSP_LoadTextures(lump_t *l)
 					tx->basematerialflags |= MATERIALFLAG_WATERSCROLL | MATERIALFLAG_LIGHTBOTHSIDES | MATERIALFLAG_NOSHADOW;
 				else
 					tx->basematerialflags |= MATERIALFLAG_WATERSCROLL | MATERIALFLAG_LIGHTBOTHSIDES | MATERIALFLAG_NOSHADOW | MATERIALFLAG_WATERALPHA | MATERIALFLAG_WATERSHADER;
-				if (tx->skinframes[0] && tx->skinframes[0]->fog)
+				if (tx->skinframes[0] && tx->skinframes[0]->hasalpha)
 					tx->basematerialflags |= MATERIALFLAG_ALPHA | MATERIALFLAG_BLENDED | MATERIALFLAG_NOSHADOW;
 			}
 			else if (!strncmp(tx->name, "mirror", 6)) // Tenebrae
 			{
 				// replace the texture with black
-				tx->skinframes[0] = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_PRECACHE, zero, 1, 1);
+				tx->skinframes[0] = R_SkinFrame_LoadInternalBGRA(tx->name, 0, zero, 1, 1);
 				tx->basematerialflags |= MATERIALFLAG_REFLECTION;
 			}
 			else if (!strncmp(tx->name, "sky", 3))
 				tx->basematerialflags = MATERIALFLAG_SKY | MATERIALFLAG_NOSHADOW;
 			else if (!strcmp(tx->name, "caulk"))
 				tx->basematerialflags = MATERIALFLAG_NODRAW | MATERIALFLAG_NOSHADOW;
-			else if (tx->skinframes[0] && tx->skinframes[0]->fog)
+			else if (tx->skinframes[0] && tx->skinframes[0]->hasalpha)
 				tx->basematerialflags |= MATERIALFLAG_ALPHA | MATERIALFLAG_BLENDED | MATERIALFLAG_NOSHADOW;
 
 			// start out with no animation
@@ -2282,71 +2247,7 @@ static void Mod_Q1BSP_GenerateWarpMesh(msurface_t *surface)
 }
 #endif
 
-/* Maximum size of a single LM */
-#define MAX_SINGLE_LM_SIZE    256
-
-struct alloc_lm_row
-{
-	int rowY;
-	int currentX;
-};
-
-struct alloc_lm_state
-{
-	int currentY;
-	struct alloc_lm_row rows[MAX_SINGLE_LM_SIZE];
-};
-
-static void init_alloc_lm_state (struct alloc_lm_state* state)
-{
-	int r;
-
-	state->currentY = 0;
-	for (r = 0; r < MAX_SINGLE_LM_SIZE; r++)
-	{
-	  state->rows[r].currentX = 0;
-	  state->rows[r].rowY = -1;
-	}
-}
-
-static qboolean Mod_Q1BSP_AllocLightmapBlock(struct alloc_lm_state* state, int totalwidth, int totalheight, int blockwidth, int blockheight, int *outx, int *outy)
-{
-	struct alloc_lm_row* row;
-	int r;
-
-	row = &(state->rows[blockheight]);
-	if ((row->rowY < 0) || (row->currentX + blockwidth > totalwidth))
-	{
-		if (state->currentY + blockheight <= totalheight)
-		{
-			row->rowY = state->currentY;
-			row->currentX = 0;
-			state->currentY += blockheight;
-		}
-		else
-		{
-			/* See if we can stuff the block into a higher row */
-			row = NULL;
-			for (r = blockheight; r < MAX_SINGLE_LM_SIZE; r++)
-			{
-				if ((state->rows[r].rowY >= 0)
-				  && (state->rows[r].currentX + blockwidth <= totalwidth))
-				{
-					row = &(state->rows[r]);
-					break;
-				}
-			}
-			if (row == NULL) return false;
-		}
-	}
-	*outy = row->rowY;
-	*outx = row->currentX;
-	row->currentX += blockwidth;
-
-	return true;
-}
-
-extern cvar_t gl_max_size;
+extern cvar_t gl_max_lightmapsize;
 static void Mod_Q1BSP_LoadFaces(lump_t *l)
 {
 	dface_t *in;
@@ -2364,6 +2265,7 @@ static void Mod_Q1BSP_LoadFaces(lump_t *l)
 
 	loadmodel->num_surfaces = count;
 
+	loadmodel->brushq1.firstrender = true;
 	loadmodel->brushq1.lightmapupdateflags = (unsigned char *)Mem_Alloc(loadmodel->mempool, count*sizeof(unsigned char));
 
 	totalverts = 0;
@@ -2379,8 +2281,8 @@ static void Mod_Q1BSP_LoadFaces(lump_t *l)
 
 	lightmaptexture = NULL;
 	deluxemaptexture = r_texture_blanknormalmap;
-	lightmapnumber = 1;
-	lightmapsize = max(256, gl_max_size.integer);
+	lightmapnumber = 0;
+	lightmapsize = bound(256, gl_max_lightmapsize.integer, (int)vid.maxtexturesize_2d);
 	totallightmapsamples = 0;
 
 	totalverts = 0;
@@ -2443,8 +2345,8 @@ static void Mod_Q1BSP_LoadFaces(lump_t *l)
 		}
 
 		// compile additional data about the surface geometry
-		Mod_BuildNormals(surface->num_firstvertex, surface->num_vertices, surface->num_triangles, loadmodel->surfmesh.data_vertex3f, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle), loadmodel->surfmesh.data_normal3f, true);
-		Mod_BuildTextureVectorsFromNormals(surface->num_firstvertex, surface->num_vertices, surface->num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_texcoordtexture2f, loadmodel->surfmesh.data_normal3f, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle), loadmodel->surfmesh.data_svector3f, loadmodel->surfmesh.data_tvector3f, true);
+		Mod_BuildNormals(surface->num_firstvertex, surface->num_vertices, surface->num_triangles, loadmodel->surfmesh.data_vertex3f, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle), loadmodel->surfmesh.data_normal3f, r_smoothnormals_areaweighting.integer != 0);
+		Mod_BuildTextureVectorsFromNormals(surface->num_firstvertex, surface->num_vertices, surface->num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_texcoordtexture2f, loadmodel->surfmesh.data_normal3f, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle), loadmodel->surfmesh.data_svector3f, loadmodel->surfmesh.data_tvector3f, r_smoothnormals_areaweighting.integer != 0);
 		BoxFromPoints(surface->mins, surface->maxs, surface->num_vertices, (loadmodel->surfmesh.data_vertex3f + 3 * surface->num_firstvertex));
 
 		// generate surface extents information
@@ -2479,7 +2381,7 @@ static void Mod_Q1BSP_LoadFaces(lump_t *l)
 		if (i == -1)
 		{
 			surface->lightmapinfo->samples = NULL;
-#if 0
+#if 1
 			// give non-lightmapped water a 1x white lightmap
 			if (surface->texture->name[0] == '*' && (surface->lightmapinfo->texinfo->flags & TEX_SPECIAL) && ssize <= 256 && tsize <= 256)
 			{
@@ -2517,26 +2419,27 @@ static void Mod_Q1BSP_LoadFaces(lump_t *l)
 			// lightmap is needed on this surface (rather than duplicating the
 			// logic above)
 			loadmodel->brushq1.lightmapupdateflags[surfacenum] = true;
+			loadmodel->lit = true;
 		}
 	}
 
 	// small maps (such as ammo boxes especially) don't need big lightmap
 	// textures, so this code tries to guess a good size based on
 	// totallightmapsamples (size of the lightmaps lump basically), as well as
-	// trying to max out the gl_max_size if there is a lot of lightmap data to
-	// store
+	// trying to max out the size if there is a lot of lightmap data to store
 	// additionally, never choose a lightmapsize that is smaller than the
 	// largest surface encountered (as it would fail)
 	i = lightmapsize;
-	for (lightmapsize = 64; (lightmapsize < i) && (lightmapsize < gl_max_size.integer) && (totallightmapsamples > lightmapsize*lightmapsize); lightmapsize*=2)
+	for (lightmapsize = 64; (lightmapsize < i) && (lightmapsize < bound(128, gl_max_lightmapsize.integer, (int)vid.maxtexturesize_2d)) && (totallightmapsamples > lightmapsize*lightmapsize); lightmapsize*=2)
 		;
 
 	// now that we've decided the lightmap texture size, we can do the rest
 	if (cls.state != ca_dedicated)
 	{
 		int stainmapsize = 0;
-		struct alloc_lm_state allocState;
+		mod_alloclightmap_state_t allocState;
 
+		Mod_AllocLightmap_Init(&allocState, lightmapsize, lightmapsize);
 		for (surfacenum = 0, surface = loadmodel->data_surfaces;surfacenum < count;surfacenum++, surface++)
 		{
 			int i, iu, iv, lightmapx = 0, lightmapy = 0;
@@ -2551,18 +2454,21 @@ static void Mod_Q1BSP_LoadFaces(lump_t *l)
 			tsize = (surface->lightmapinfo->extents[1] >> 4) + 1;
 			stainmapsize += ssize * tsize * 3;
 
-			if (!lightmaptexture || !Mod_Q1BSP_AllocLightmapBlock(&allocState, lightmapsize, lightmapsize, ssize, tsize, &lightmapx, &lightmapy))
+			if (!lightmaptexture || !Mod_AllocLightmap_Block(&allocState, ssize, tsize, &lightmapx, &lightmapy))
 			{
 				// allocate a texture pool if we need it
 				if (loadmodel->texturepool == NULL)
 					loadmodel->texturepool = R_AllocTexturePool();
 				// could not find room, make a new lightmap
-				lightmaptexture = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%i", lightmapnumber), lightmapsize, lightmapsize, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE, NULL);
+				loadmodel->brushq3.num_mergedlightmaps = lightmapnumber + 1;
+				loadmodel->brushq3.data_lightmaps = (rtexture_t **)Mem_Realloc(loadmodel->mempool, loadmodel->brushq3.data_lightmaps, loadmodel->brushq3.num_mergedlightmaps * sizeof(loadmodel->brushq3.data_lightmaps[0]));
+				loadmodel->brushq3.data_deluxemaps = (rtexture_t **)Mem_Realloc(loadmodel->mempool, loadmodel->brushq3.data_deluxemaps, loadmodel->brushq3.num_mergedlightmaps * sizeof(loadmodel->brushq3.data_deluxemaps[0]));
+				loadmodel->brushq3.data_lightmaps[lightmapnumber] = lightmaptexture = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%i", lightmapnumber), lightmapsize, lightmapsize, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_ALLOWUPDATES, -1, NULL);
 				if (loadmodel->brushq1.nmaplightdata)
-					deluxemaptexture = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%i", lightmapnumber), lightmapsize, lightmapsize, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE, NULL);
+					loadmodel->brushq3.data_deluxemaps[lightmapnumber] = deluxemaptexture = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%i", lightmapnumber), lightmapsize, lightmapsize, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_ALLOWUPDATES, -1, NULL);
 				lightmapnumber++;
-				init_alloc_lm_state (&allocState);
-				Mod_Q1BSP_AllocLightmapBlock(&allocState, lightmapsize, lightmapsize, ssize, tsize, &lightmapx, &lightmapy);
+				Mod_AllocLightmap_Reset(&allocState);
+				Mod_AllocLightmap_Block(&allocState, ssize, tsize, &lightmapx, &lightmapy);
 			}
 			surface->lightmaptexture = lightmaptexture;
 			surface->deluxemaptexture = deluxemaptexture;
@@ -3042,26 +2948,7 @@ typedef struct portal_s
 }
 portal_t;
 
-static portal_t *portalchain;
-
-/*
-===========
-AllocPortal
-===========
-*/
-static portal_t *AllocPortal(void)
-{
-	portal_t *p;
-	p = (portal_t *)Mem_Alloc(loadmodel->mempool, sizeof(portal_t));
-	p->chain = portalchain;
-	portalchain = p;
-	return p;
-}
-
-static void FreePortal(portal_t *p)
-{
-	Mem_Free(p);
-}
+static memexpandablearray_t portalarray;
 
 static void Mod_Q1BSP_RecursiveRecalcNodeBBox(mnode_t *node)
 {
@@ -3084,8 +2971,8 @@ static void Mod_Q1BSP_RecursiveRecalcNodeBBox(mnode_t *node)
 
 static void Mod_Q1BSP_FinalizePortals(void)
 {
-	int i, j, numportals, numpoints;
-	portal_t *p, *pnext;
+	int i, j, numportals, numpoints, portalindex, portalrange = Mem_ExpandableArray_IndexRange(&portalarray);
+	portal_t *p;
 	mportal_t *portal;
 	mvertex_t *point;
 	mleaf_t *leaf, *endleaf;
@@ -3094,16 +2981,21 @@ static void Mod_Q1BSP_FinalizePortals(void)
 	// leafs (because qbsp is very sloppy)
 	leaf = loadmodel->brush.data_leafs;
 	endleaf = leaf + loadmodel->brush.num_leafs;
-	for (;leaf < endleaf;leaf++)
+	if (mod_recalculatenodeboxes.integer)
 	{
-		VectorSet(leaf->mins,  2000000000,  2000000000,  2000000000);
-		VectorSet(leaf->maxs, -2000000000, -2000000000, -2000000000);
+		for (;leaf < endleaf;leaf++)
+		{
+			VectorSet(leaf->mins,  2000000000,  2000000000,  2000000000);
+			VectorSet(leaf->maxs, -2000000000, -2000000000, -2000000000);
+		}
 	}
-	p = portalchain;
 	numportals = 0;
 	numpoints = 0;
-	while (p)
+	for (portalindex = 0;portalindex < portalrange;portalindex++)
 	{
+		p = (portal_t*)Mem_ExpandableArray_RecordAtIndex(&portalarray, portalindex);
+		if (!p)
+			continue;
 		// note: this check must match the one below or it will usually corrupt memory
 		// the nodes[0] != nodes[1] check is because leaf 0 is the shared solid leaf, it can have many portals inside with leaf 0 on both sides
 		if (p->numpoints >= 3 && p->nodes[0] != p->nodes[1] && ((mleaf_t *)p->nodes[0])->clusterindex >= 0 && ((mleaf_t *)p->nodes[1])->clusterindex >= 0)
@@ -3111,7 +3003,6 @@ static void Mod_Q1BSP_FinalizePortals(void)
 			numportals += 2;
 			numpoints += p->numpoints * 2;
 		}
-		p = p->chain;
 	}
 	loadmodel->brush.data_portals = (mportal_t *)Mem_Alloc(loadmodel->mempool, numportals * sizeof(mportal_t) + numpoints * sizeof(mvertex_t));
 	loadmodel->brush.num_portals = numportals;
@@ -3123,12 +3014,11 @@ static void Mod_Q1BSP_FinalizePortals(void)
 	// process all portals in the global portal chain, while freeing them
 	portal = loadmodel->brush.data_portals;
 	point = loadmodel->brush.data_portalpoints;
-	p = portalchain;
-	portalchain = NULL;
-	while (p)
+	for (portalindex = 0;portalindex < portalrange;portalindex++)
 	{
-		pnext = p->chain;
-
+		p = (portal_t*)Mem_ExpandableArray_RecordAtIndex(&portalarray, portalindex);
+		if (!p)
+			continue;
 		if (p->numpoints >= 3 && p->nodes[0] != p->nodes[1])
 		{
 			// note: this check must match the one above or it will usually corrupt memory
@@ -3182,25 +3072,27 @@ static void Mod_Q1BSP_FinalizePortals(void)
 				portal++;
 			}
 			// add the portal's polygon points to the leaf bounding boxes
-			for (i = 0;i < 2;i++)
+			if (mod_recalculatenodeboxes.integer)
 			{
-				leaf = (mleaf_t *)p->nodes[i];
-				for (j = 0;j < p->numpoints;j++)
+				for (i = 0;i < 2;i++)
 				{
-					if (leaf->mins[0] > p->points[j*3+0]) leaf->mins[0] = p->points[j*3+0];
-					if (leaf->mins[1] > p->points[j*3+1]) leaf->mins[1] = p->points[j*3+1];
-					if (leaf->mins[2] > p->points[j*3+2]) leaf->mins[2] = p->points[j*3+2];
-					if (leaf->maxs[0] < p->points[j*3+0]) leaf->maxs[0] = p->points[j*3+0];
-					if (leaf->maxs[1] < p->points[j*3+1]) leaf->maxs[1] = p->points[j*3+1];
-					if (leaf->maxs[2] < p->points[j*3+2]) leaf->maxs[2] = p->points[j*3+2];
+					leaf = (mleaf_t *)p->nodes[i];
+					for (j = 0;j < p->numpoints;j++)
+					{
+						if (leaf->mins[0] > p->points[j*3+0]) leaf->mins[0] = p->points[j*3+0];
+						if (leaf->mins[1] > p->points[j*3+1]) leaf->mins[1] = p->points[j*3+1];
+						if (leaf->mins[2] > p->points[j*3+2]) leaf->mins[2] = p->points[j*3+2];
+						if (leaf->maxs[0] < p->points[j*3+0]) leaf->maxs[0] = p->points[j*3+0];
+						if (leaf->maxs[1] < p->points[j*3+1]) leaf->maxs[1] = p->points[j*3+1];
+						if (leaf->maxs[2] < p->points[j*3+2]) leaf->maxs[2] = p->points[j*3+2];
+					}
 				}
 			}
 		}
-		FreePortal(p);
-		p = pnext;
 	}
 	// now recalculate the node bounding boxes from the leafs
-	Mod_Q1BSP_RecursiveRecalcNodeBBox(loadmodel->brush.data_nodes);
+	if (mod_recalculatenodeboxes.integer)
+		Mod_Q1BSP_RecursiveRecalcNodeBBox(loadmodel->brush.data_nodes + loadmodel->brushq1.hulls[0].firstclipnode);
 }
 
 /*
@@ -3277,6 +3169,9 @@ static void RemovePortalFromNodes(portal_t *portal)
 }
 
 #define PORTAL_DIST_EPSILON (1.0 / 32.0)
+static double *portalpointsbuffer;
+static int portalpointsbufferoffset;
+static int portalpointsbuffersize;
 static void Mod_Q1BSP_RecursiveNodePortals(mnode_t *node)
 {
 	int i, side;
@@ -3284,12 +3179,23 @@ static void Mod_Q1BSP_RecursiveNodePortals(mnode_t *node)
 	mplane_t clipplane, *plane;
 	portal_t *portal, *nextportal, *nodeportal, *splitportal, *temp;
 	int numfrontpoints, numbackpoints;
-	double frontpoints[3*MAX_PORTALPOINTS], backpoints[3*MAX_PORTALPOINTS];
+	double *frontpoints, *backpoints;
 
 	// if a leaf, we're done
 	if (!node->plane)
 		return;
 
+	// get some space for our clipping operations to use
+	if (portalpointsbuffersize < portalpointsbufferoffset + 6*MAX_PORTALPOINTS)
+	{
+		portalpointsbuffersize = portalpointsbufferoffset * 2;
+		portalpointsbuffer = (double *)Mem_Realloc(loadmodel->mempool, portalpointsbuffer, portalpointsbuffersize * sizeof(*portalpointsbuffer));
+	}
+	frontpoints = portalpointsbuffer + portalpointsbufferoffset;
+	portalpointsbufferoffset += 3*MAX_PORTALPOINTS;
+	backpoints = portalpointsbuffer + portalpointsbufferoffset;
+	portalpointsbufferoffset += 3*MAX_PORTALPOINTS;
+
 	plane = node->plane;
 
 	front = node->children[0];
@@ -3299,7 +3205,7 @@ static void Mod_Q1BSP_RecursiveNodePortals(mnode_t *node)
 
 	// create the new portal by generating a polygon for the node plane,
 	// and clipping it by all of the other portals(which came from nodes above this one)
-	nodeportal = AllocPortal();
+	nodeportal = (portal_t *)Mem_ExpandableArray_AllocRecord(&portalarray);
 	nodeportal->plane = *plane;
 
 	// TODO: calculate node bounding boxes during recursion and calculate a maximum plane size accordingly to improve precision (as most maps do not need 1 billion unit plane polygons)
@@ -3382,7 +3288,7 @@ static void Mod_Q1BSP_RecursiveNodePortals(mnode_t *node)
 		}
 
 		// the portal is split
-		splitportal = AllocPortal();
+		splitportal = (portal_t *)Mem_ExpandableArray_AllocRecord(&portalarray);
 		temp = splitportal->chain;
 		*splitportal = *portal;
 		splitportal->chain = temp;
@@ -3407,13 +3313,23 @@ static void Mod_Q1BSP_RecursiveNodePortals(mnode_t *node)
 
 	Mod_Q1BSP_RecursiveNodePortals(front);
 	Mod_Q1BSP_RecursiveNodePortals(back);
+
+	portalpointsbufferoffset -= 6*MAX_PORTALPOINTS;
 }
 
 static void Mod_Q1BSP_MakePortals(void)
 {
-	portalchain = NULL;
-	Mod_Q1BSP_RecursiveNodePortals(loadmodel->brush.data_nodes);
+	Mem_ExpandableArray_NewArray(&portalarray, loadmodel->mempool, sizeof(portal_t), 1020*1024/sizeof(portal_t));
+	portalpointsbufferoffset = 0;
+	portalpointsbuffersize = 6*MAX_PORTALPOINTS*128;
+	portalpointsbuffer = (double *)Mem_Alloc(loadmodel->mempool, portalpointsbuffersize * sizeof(*portalpointsbuffer));
+	Mod_Q1BSP_RecursiveNodePortals(loadmodel->brush.data_nodes + loadmodel->brushq1.hulls[0].firstclipnode);
+	Mem_Free(portalpointsbuffer);
+	portalpointsbuffer = NULL;
+	portalpointsbufferoffset = 0;
+	portalpointsbuffersize = 0;
 	Mod_Q1BSP_FinalizePortals();
+	Mem_ExpandableArray_FreeArray(&portalarray);
 }
 
 //Returns PVS data for a given point
@@ -3421,7 +3337,7 @@ static void Mod_Q1BSP_MakePortals(void)
 static unsigned char *Mod_Q1BSP_GetPVS(dp_model_t *model, const vec3_t p)
 {
 	mnode_t *node;
-	node = model->brush.data_nodes;
+	node = model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode;
 	while (node->plane)
 		node = node->children[(node->plane->type < 3 ? p[node->plane->type] : DotProduct(p,node->plane->normal)) < node->plane->dist];
 	if (((mleaf_t *)node)->clusterindex >= 0)
@@ -3469,7 +3385,7 @@ static int Mod_Q1BSP_FatPVS(dp_model_t *model, const vec3_t org, vec_t radius, u
 	}
 	if (!merge)
 		memset(pvsbuffer, 0, bytes);
-	Mod_Q1BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, bytes, model->brush.data_nodes);
+	Mod_Q1BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, bytes, model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode);
 	return bytes;
 }
 
@@ -3506,15 +3422,38 @@ static void Mod_Q1BSP_RoundUpToHullSize(dp_model_t *cmodel, const vec3_t inmins,
 	VectorAdd(inmins, hull->clip_size, outmaxs);
 }
 
+static int Mod_Q1BSP_CreateShadowMesh(dp_model_t *mod)
+{
+	int j;
+	int numshadowmeshtriangles = 0;
+	msurface_t *surface;
+	if (cls.state == ca_dedicated)
+		return 0;
+	// make a single combined shadow mesh to allow optimized shadow volume creation
+
+	for (j = 0, surface = mod->data_surfaces;j < mod->num_surfaces;j++, surface++)
+	{
+		surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
+		numshadowmeshtriangles += surface->num_triangles;
+	}
+	mod->brush.shadowmesh = Mod_ShadowMesh_Begin(mod->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
+	for (j = 0, surface = mod->data_surfaces;j < mod->num_surfaces;j++, surface++)
+		if (surface->num_triangles > 0)
+			Mod_ShadowMesh_AddMesh(mod->mempool, mod->brush.shadowmesh, NULL, NULL, NULL, mod->surfmesh.data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (mod->surfmesh.data_element3i + 3 * surface->num_firsttriangle));
+	mod->brush.shadowmesh = Mod_ShadowMesh_Finish(mod->mempool, mod->brush.shadowmesh, false, r_enableshadowvolumes.integer, false);
+	if (mod->brush.shadowmesh && mod->brush.shadowmesh->neighbor3i)
+		Mod_BuildTriangleNeighbors(mod->brush.shadowmesh->neighbor3i, mod->brush.shadowmesh->element3i, mod->brush.shadowmesh->numtriangles);
+
+	return numshadowmeshtriangles;
+}
+
 void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 {
 	int i, j, k;
 	dheader_t *header;
 	dmodel_t *bm;
-	mempool_t *mainmempool;
 	float dist, modelyawradius, modelradius;
 	msurface_t *surface;
-	int numshadowmeshtriangles;
 	hullinfo_t hullinfo;
 	int totalstylesurfaces, totalstyles, stylecounts[256], remapstyles[256];
 	model_brush_lightstyleinfo_t styleinfo[256];
@@ -3585,6 +3524,7 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 	mod->Draw = R_Q1BSP_Draw;
 	mod->DrawDepth = R_Q1BSP_DrawDepth;
 	mod->DrawDebug = R_Q1BSP_DrawDebug;
+	mod->DrawPrepass = R_Q1BSP_DrawPrepass;
 	mod->GetLightInfo = R_Q1BSP_GetLightInfo;
 	mod->CompileShadowMap = R_Q1BSP_CompileShadowMap;
 	mod->DrawShadowMap = R_Q1BSP_DrawShadowMap;
@@ -3598,12 +3538,15 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 	mod->brush.qw_md4sum2 = 0;
 	for (i = 0;i < HEADER_LUMPS;i++)
 	{
+		int temp;
 		if (i == LUMP_ENTITIES)
 			continue;
-		mod->brush.qw_md4sum ^= LittleLong(Com_BlockChecksum(mod_base + header->lumps[i].fileofs, header->lumps[i].filelen));
+		temp = Com_BlockChecksum(mod_base + header->lumps[i].fileofs, header->lumps[i].filelen);
+		mod->brush.qw_md4sum ^= LittleLong(temp);
 		if (i == LUMP_VISIBILITY || i == LUMP_LEAFS || i == LUMP_NODES)
 			continue;
-		mod->brush.qw_md4sum2 ^= LittleLong(Com_BlockChecksum(mod_base + header->lumps[i].fileofs, header->lumps[i].filelen));
+		temp = Com_BlockChecksum(mod_base + header->lumps[i].fileofs, header->lumps[i].filelen);
+		mod->brush.qw_md4sum2 ^= LittleLong(temp);
 	}
 
 	Mod_Q1BSP_LoadEntities(&header->lumps[LUMP_ENTITIES]);
@@ -3632,25 +3575,14 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 	mod->brushq1.num_compressedpvs = 0;
 
 	Mod_Q1BSP_MakeHull0();
-	Mod_Q1BSP_MakePortals();
+	if (mod_bsp_portalize.integer)
+		Mod_Q1BSP_MakePortals();
 
 	mod->numframes = 2;		// regular and alternate animation
 	mod->numskins = 1;
 
-	mainmempool = mod->mempool;
-
 	// make a single combined shadow mesh to allow optimized shadow volume creation
-	numshadowmeshtriangles = 0;
-	for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
-	{
-		surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
-		numshadowmeshtriangles += surface->num_triangles;
-	}
-	loadmodel->brush.shadowmesh = Mod_ShadowMesh_Begin(loadmodel->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
-	for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
-		Mod_ShadowMesh_AddMesh(loadmodel->mempool, loadmodel->brush.shadowmesh, NULL, NULL, NULL, loadmodel->surfmesh.data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle));
-	loadmodel->brush.shadowmesh = Mod_ShadowMesh_Finish(loadmodel->mempool, loadmodel->brush.shadowmesh, false, true, false);
-	Mod_BuildTriangleNeighbors(loadmodel->brush.shadowmesh->neighbor3i, loadmodel->brush.shadowmesh->element3i, loadmodel->brush.shadowmesh->numtriangles);
+	Mod_Q1BSP_CreateShadowMesh(loadmodel);
 
 	if (loadmodel->brush.numsubmodels)
 		loadmodel->brush.submodels = (dp_model_t **)Mem_Alloc(loadmodel->mempool, loadmodel->brush.numsubmodels * sizeof(dp_model_t *));
@@ -3707,7 +3639,6 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 			// textures and memory belong to the main model
 			mod->texturepool = NULL;
 			mod->mempool = NULL;
-			mod->brush.TraceLineOfSight = NULL;
 			mod->brush.GetPVS = NULL;
 			mod->brush.FatPVS = NULL;
 			mod->brush.BoxTouchingPVS = NULL;
@@ -3735,6 +3666,9 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 		mod->firstmodelsurface = bm->firstface;
 		mod->nummodelsurfaces = bm->numfaces;
 
+		// set node/leaf parents for this submodel
+		Mod_Q1BSP_LoadNodes_RecursiveSetParent(mod->brush.data_nodes + mod->brushq1.hulls[0].firstclipnode, NULL);
+
 		// make the model surface list (used by shadowing/lighting)
 		mod->sortedmodelsurfaces = (int *)datapointer;datapointer += mod->nummodelsurfaces * sizeof(int);
 		Mod_MakeSortedSurfaces(mod);
@@ -3774,7 +3708,7 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 				mod->DrawSky = R_Q1BSP_DrawSky;
 
 			for (j = 0, surface = &mod->data_surfaces[mod->firstmodelsurface];j < mod->nummodelsurfaces;j++, surface++)
-				if (surface->texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION))
+				if (surface->texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION | MATERIALFLAG_CAMERA))
 					break;
 			if (j < mod->nummodelsurfaces)
 				mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
@@ -3823,14 +3757,29 @@ void Mod_Q1BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 			Con_Printf("warning: empty submodel *%i in %s\n", i+1, loadmodel->name);
 		}
 		//mod->brushq1.num_visleafs = bm->visleafs;
-	}
 
-	Mod_Q1BSP_LoadMapBrushes();
+		// build a Bounding Interval Hierarchy for culling triangles in light rendering
+		Mod_MakeCollisionBIH(mod, true, &mod->render_bih);
+
+		if (mod_q1bsp_polygoncollisions.integer)
+		{
+			mod->collision_bih = mod->render_bih;
+			// point traces and contents checks still use the bsp tree
+			mod->TraceLine = Mod_CollisionBIH_TraceLine;
+			mod->TraceBox = Mod_CollisionBIH_TraceBox;
+			mod->TraceBrush = Mod_CollisionBIH_TraceBrush;
+		}
 
-	//Mod_Q1BSP_ProcessLightList();
+		// generate VBOs and other shared data before cloning submodels
+		if (i == 0)
+		{
+			Mod_BuildVBOs();
+			Mod_Q1BSP_LoadMapBrushes();
+			//Mod_Q1BSP_ProcessLightList();
+		}
+	}
 
-	if (developer.integer >= 10)
-		Con_Printf("Some stats for q1bsp model \"%s\": %i faces, %i nodes, %i leafs, %i visleafs, %i visleafportals\n", loadmodel->name, loadmodel->num_surfaces, loadmodel->brush.num_nodes, loadmodel->brush.num_leafs, mod->brush.num_pvsclusters, loadmodel->brush.num_portals);
+	Con_DPrintf("Stats for q1bsp model \"%s\": %i faces, %i nodes, %i leafs, %i visleafs, %i visleafportals, mesh: %i vertices, %i triangles, %i surfaces\n", loadmodel->name, loadmodel->num_surfaces, loadmodel->brush.num_nodes, loadmodel->brush.num_leafs, mod->brush.num_pvsclusters, loadmodel->brush.num_portals, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->num_surfaces);
 }
 
 static void Mod_Q2BSP_LoadEntities(lump_t *l)
@@ -4285,6 +4234,8 @@ static void Mod_Q3BSP_LoadEntities(lump_t *l)
 	loadmodel->brush.entities[l->filelen] = 0;
 	data = loadmodel->brush.entities;
 	// some Q3 maps override the lightgrid_cellsize with a worldspawn key
+	// VorteX: q3map2 FS-R generates tangentspace deluxemaps for q3bsp and sets 'deluxeMaps' key
+	loadmodel->brushq3.deluxemapping = false;
 	if (data && COM_ParseToken_Simple(&data, false, false) && com_token[0] == '{')
 	{
 		while (1)
@@ -4302,13 +4253,34 @@ static void Mod_Q3BSP_LoadEntities(lump_t *l)
 			if (!COM_ParseToken_Simple(&data, false, false))
 				break; // error
 			strlcpy(value, com_token, sizeof(value));
-			if (!strcmp("gridsize", key))
+			if (!strcasecmp("gridsize", key)) // this one is case insensitive to 100% match q3map2
 			{
 #if _MSC_VER >= 1400
 #define sscanf sscanf_s
 #endif
+#if 0
 				if (sscanf(value, "%f %f %f", &v[0], &v[1], &v[2]) == 3 && v[0] != 0 && v[1] != 0 && v[2] != 0)
 					VectorCopy(v, loadmodel->brushq3.num_lightgrid_cellsize);
+#else
+				VectorSet(v, 64, 64, 128);
+				if(sscanf(value, "%f %f %f", &v[0], &v[1], &v[2]) != 3)
+					Con_Printf("Mod_Q3BSP_LoadEntities: funny gridsize \"%s\" in %s, interpreting as \"%f %f %f\" to match q3map2's parsing\n", value, loadmodel->name, v[0], v[1], v[2]);
+				if (v[0] != 0 && v[1] != 0 && v[2] != 0)
+					VectorCopy(v, loadmodel->brushq3.num_lightgrid_cellsize);
+#endif
+			}
+			else if (!strcmp("deluxeMaps", key))
+			{
+				if (!strcmp(com_token, "1"))
+				{
+					loadmodel->brushq3.deluxemapping = true;
+					loadmodel->brushq3.deluxemapping_modelspace = true;
+				}
+				else if (!strcmp(com_token, "2"))
+				{
+					loadmodel->brushq3.deluxemapping = true;
+					loadmodel->brushq3.deluxemapping_modelspace = false;
+				}
 			}
 		}
 	}
@@ -4335,13 +4307,11 @@ static void Mod_Q3BSP_LoadTextures(lump_t *l)
 		strlcpy (out[i].name, in[i].name, sizeof (out[i].name));
 		out[i].surfaceflags = LittleLong(in[i].surfaceflags);
 		out[i].supercontents = Mod_Q3BSP_SuperContentsFromNativeContents(loadmodel, LittleLong(in[i].contents));
+		Mod_LoadTextureFromQ3Shader(out + i, out[i].name, true, true, TEXF_MIPMAP | TEXF_ISWORLD | TEXF_PICMIP | TEXF_COMPRESS);
+		// restore the surfaceflags and supercontents
+		out[i].surfaceflags = LittleLong(in[i].surfaceflags);
+		out[i].supercontents = Mod_Q3BSP_SuperContentsFromNativeContents(loadmodel, LittleLong(in[i].contents));
 	}
-
-	if (cls.state == ca_dedicated)
-		return;
-
-	for (i = 0;i < count;i++, in++, out++)
-		Mod_LoadTextureFromQ3Shader(out, out->name, true, true, TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS);
 }
 
 static void Mod_Q3BSP_LoadPlanes(lump_t *l)
@@ -4429,7 +4399,7 @@ static void Mod_Q3BSP_LoadBrushes(lump_t *l)
 {
 	q3dbrush_t *in;
 	q3mbrush_t *out;
-	int i, j, n, c, count, maxplanes;
+	int i, j, n, c, count, maxplanes, q3surfaceflags;
 	colplanef_t *planes;
 
 	in = (q3dbrush_t *)(mod_base + l->fileofs);
@@ -4465,15 +4435,17 @@ static void Mod_Q3BSP_LoadBrushes(lump_t *l)
 				Mem_Free(planes);
 			planes = (colplanef_t *)Mem_Alloc(tempmempool, sizeof(colplanef_t) * maxplanes);
 		}
+		q3surfaceflags = 0;
 		for (j = 0;j < out->numbrushsides;j++)
 		{
 			VectorCopy(out->firstbrushside[j].plane->normal, planes[j].normal);
 			planes[j].dist = out->firstbrushside[j].plane->dist;
 			planes[j].q3surfaceflags = out->firstbrushside[j].texture->surfaceflags;
 			planes[j].texture = out->firstbrushside[j].texture;
+			q3surfaceflags |= planes[j].q3surfaceflags;
 		}
 		// make the colbrush from the planes
-		out->colbrushf = Collision_NewBrushFromPlanes(loadmodel->mempool, out->numbrushsides, planes, out->texture->supercontents);
+		out->colbrushf = Collision_NewBrushFromPlanes(loadmodel->mempool, out->numbrushsides, planes, out->texture->supercontents, q3surfaceflags, out->texture, true);
 
 		// this whole loop can take a while (e.g. on redstarrepublic4)
 		CL_KeepaliveMessage(false);
@@ -4543,6 +4515,8 @@ static void Mod_Q3BSP_LoadVertices(lump_t *l)
 		loadmodel->brushq3.data_color4f[i * 4 + 1] = in->color4ub[1] * (1.0f / 255.0f);
 		loadmodel->brushq3.data_color4f[i * 4 + 2] = in->color4ub[2] * (1.0f / 255.0f);
 		loadmodel->brushq3.data_color4f[i * 4 + 3] = in->color4ub[3] * (1.0f / 255.0f);
+		if(in->color4ub[0] != 255 || in->color4ub[1] != 255 || in->color4ub[2] != 255)
+			loadmodel->lit = true;
 	}
 }
 
@@ -4556,8 +4530,16 @@ static void Mod_Q3BSP_LoadTriangles(lump_t *l)
 	if (l->filelen % sizeof(int[3]))
 		Host_Error("Mod_Q3BSP_LoadTriangles: funny lump size in %s",loadmodel->name);
 	count = l->filelen / sizeof(*in);
-	out = (int *)Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
 
+	if(!loadmodel->brushq3.num_vertices)
+	{
+		if (count)
+			Con_Printf("Mod_Q3BSP_LoadTriangles: %s has triangles but no vertexes, broken compiler, ignoring problem\n", loadmodel->name);
+		loadmodel->brushq3.num_triangles = 0;
+		return;
+	}
+
+	out = (int *)Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
 	loadmodel->brushq3.num_triangles = count / 3;
 	loadmodel->brushq3.data_element3i = out;
 
@@ -4567,8 +4549,6 @@ static void Mod_Q3BSP_LoadTriangles(lump_t *l)
 		if (*out < 0 || *out >= loadmodel->brushq3.num_vertices)
 		{
 			Con_Printf("Mod_Q3BSP_LoadTriangles: invalid vertexindex %i (%i vertices), setting to 0\n", *out, loadmodel->brushq3.num_vertices);
-			if(!loadmodel->brushq3.num_vertices)
-				Host_Error("Mod_Q1BSP_LoadTrianglles: %s has triangles but no vertexes, cannot fix\n", loadmodel->name);
 			*out = 0;
 		}
 	}
@@ -4577,12 +4557,32 @@ static void Mod_Q3BSP_LoadTriangles(lump_t *l)
 static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
 {
 	q3dlightmap_t *input_pointer;
-	int i, j, k, count, power, power2, mask, endlightmap, mergewidth, mergeheight;
+	int i;
+	int j;
+	int k;
+	int count;
+	int powerx;
+	int powery;
+	int powerxy;
+	int powerdxy;
+	int endlightmap;
+	int mergegoal;
+	int lightmapindex;
+	int realcount;
+	int realindex;
+	int mergedwidth;
+	int mergedheight;
+	int mergedcolumns;
+	int mergedrows;
+	int mergedrowsxcolumns;
+	int size;
+	int bytesperpixel;
+	int rgbmap[3];
 	unsigned char *c;
-
-	unsigned char *convertedpixels;
+	unsigned char *mergedpixels;
+	unsigned char *mergeddeluxepixels;
+	unsigned char *mergebuf;
 	char mapname[MAX_QPATH];
-	int size, bytesperpixel, rgbmap[3];
 	qboolean external;
 	unsigned char *inpixels[10000]; // max count q3map2 can output (it uses 4 digits)
 
@@ -4621,7 +4621,7 @@ static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
 		if (developer_loading.integer)
 			Con_Printf("Using external lightmaps\n");
 		FS_StripExtension(loadmodel->name, mapname, sizeof(mapname));
-		inpixels[0] = loadimagepixelsbgra(va("%s/lm_%04d", mapname, 0), false, false);
+		inpixels[0] = loadimagepixelsbgra(va("%s/lm_%04d", mapname, 0), false, false, false, NULL);
 		if(!inpixels[0])
 			return;
 
@@ -4641,19 +4641,19 @@ static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
 
 		for(count = 1; ; ++count)
 		{
-			inpixels[count] = loadimagepixelsbgra(va("%s/lm_%04d", mapname, count), false, false);
+			inpixels[count] = loadimagepixelsbgra(va("%s/lm_%04d", mapname, count), false, false, false, NULL);
 			if(!inpixels[count])
 				break; // we got all of them
 			if(image_width != size || image_height != size)
 			{
-				for(i = 0; i <= count; ++i)
-					Mem_Free(inpixels[i]);
-				Host_Error("Mod_Q3BSP_LoadLightmaps: invalid external lightmap size in %s",loadmodel->name);
+				Mem_Free(inpixels[count]);
+				inpixels[count] = NULL;
+				Con_Printf("Mod_Q3BSP_LoadLightmaps: mismatched lightmap size in %s - external lightmap %s/lm_%04d does not match earlier ones\n", loadmodel->name, mapname, count);
+				break;
 			}
 		}
 	}
 
-	convertedpixels = (unsigned char *) Mem_Alloc(tempmempool, size*size*4);
 	loadmodel->brushq3.lightmapsize = size;
 	loadmodel->brushq3.num_originallightmaps = count;
 
@@ -4666,51 +4666,56 @@ static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
 	// reason when only one lightmap is used, which can throw off the
 	// deluxemapping detection method, so check 2-lightmap bsp's specifically
 	// to see if the second lightmap is blank, if so it is not deluxemapped.
-	loadmodel->brushq3.deluxemapping = !(count & 1);
-	loadmodel->brushq3.deluxemapping_modelspace = true;
-	endlightmap = 0;
-	if (loadmodel->brushq3.deluxemapping)
-	{
-		int facecount = faceslump->filelen / sizeof(q3dface_t);
-		q3dface_t *faces = (q3dface_t *)(mod_base + faceslump->fileofs);
-		for (i = 0;i < facecount;i++)
-		{
-			j = LittleLong(faces[i].lightmapindex);
-			if (j >= 0)
+	// VorteX: autodetect only if previous attempt to find "deluxeMaps" key
+	// in Mod_Q3BSP_LoadEntities was failed
+	if (!loadmodel->brushq3.deluxemapping)
+	{
+		loadmodel->brushq3.deluxemapping = !(count & 1);
+		loadmodel->brushq3.deluxemapping_modelspace = true;
+		endlightmap = 0;
+		if (loadmodel->brushq3.deluxemapping)
+		{
+			int facecount = faceslump->filelen / sizeof(q3dface_t);
+			q3dface_t *faces = (q3dface_t *)(mod_base + faceslump->fileofs);
+			for (i = 0;i < facecount;i++)
 			{
-				endlightmap = max(endlightmap, j + 1);
-				if ((j & 1) || j + 1 >= count)
+				j = LittleLong(faces[i].lightmapindex);
+				if (j >= 0)
 				{
-					loadmodel->brushq3.deluxemapping = false;
-					break;
+					endlightmap = max(endlightmap, j + 1);
+					if ((j & 1) || j + 1 >= count)
+					{
+						loadmodel->brushq3.deluxemapping = false;
+						break;
+					}
 				}
 			}
 		}
-	}
 
-	// q3map2 sometimes (or always?) makes a second blank lightmap for no
-	// reason when only one lightmap is used, which can throw off the
-	// deluxemapping detection method, so check 2-lightmap bsp's specifically
-	// to see if the second lightmap is blank, if so it is not deluxemapped.
-	//
-	// further research has shown q3map2 sometimes creates a deluxemap and two
-	// blank lightmaps, which must be handled properly as well
-	if (endlightmap == 1 && count > 1)
-	{
-		c = inpixels[1];
-		for (i = 0;i < size*size;i++)
+		// q3map2 sometimes (or always?) makes a second blank lightmap for no
+		// reason when only one lightmap is used, which can throw off the
+		// deluxemapping detection method, so check 2-lightmap bsp's specifically
+		// to see if the second lightmap is blank, if so it is not deluxemapped.
+		//
+		// further research has shown q3map2 sometimes creates a deluxemap and two
+		// blank lightmaps, which must be handled properly as well
+		if (endlightmap == 1 && count > 1)
 		{
-			if (c[bytesperpixel*i + rgbmap[0]])
-				break;
-			if (c[bytesperpixel*i + rgbmap[1]])
-				break;
-			if (c[bytesperpixel*i + rgbmap[2]])
-				break;
-		}
-		if (i == size*size)
-		{
-			// all pixels in the unused lightmap were black...
-			loadmodel->brushq3.deluxemapping = false;
+			c = inpixels[1];
+			for (i = 0;i < size*size;i++)
+			{
+				if (c[bytesperpixel*i + rgbmap[0]])
+					break;
+				if (c[bytesperpixel*i + rgbmap[1]])
+					break;
+				if (c[bytesperpixel*i + rgbmap[2]])
+					break;
+			}
+			if (i == size*size)
+			{
+				// all pixels in the unused lightmap were black...
+				loadmodel->brushq3.deluxemapping = false;
+			}
 		}
 	}
 
@@ -4718,18 +4723,42 @@ static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
 
 	// figure out what the most reasonable merge power is within limits
 
-	loadmodel->brushq3.num_lightmapmergepower = 0;
-
-	for(i = 0; (128 << i) < size; ++i)
-		;
-	// i is now 0 for 128, 1 for 256, etc
-
-	for (power = 1;power + i <= mod_q3bsp_lightmapmergepower.integer && (size << power) <= gl_max_texture_size && (1 << (power * 2)) < 4 * (count >> (loadmodel->brushq3.deluxemapping ? 1 : 0)); power++)
-		loadmodel->brushq3.num_lightmapmergepower = power;
-
-	loadmodel->brushq3.num_lightmapmerge = 1 << loadmodel->brushq3.num_lightmapmergepower;
-
-	loadmodel->brushq3.num_mergedlightmaps = ((count >> (loadmodel->brushq3.deluxemapping ? 1 : 0)) + (1 << (loadmodel->brushq3.num_lightmapmergepower * 2)) - 1) >> (loadmodel->brushq3.num_lightmapmergepower * 2);
+	// find the appropriate NxN dimensions to merge to, to avoid wasted space
+	realcount = count >> (int)loadmodel->brushq3.deluxemapping;
+
+	// figure out how big the merged texture has to be
+	mergegoal = 128<<bound(0, mod_q3bsp_lightmapmergepower.integer, 6);
+	mergegoal = bound(size, mergegoal, (int)vid.maxtexturesize_2d);
+	while (mergegoal > size && mergegoal * mergegoal / 4 >= size * size * realcount)
+		mergegoal /= 2;
+	mergedwidth = mergegoal;
+	mergedheight = mergegoal;
+	// choose non-square size (2x1 aspect) if only half the space is used;
+	// this really only happens when the entire set fits in one texture, if
+	// there are multiple textures, we don't worry about shrinking the last
+	// one to fit, because the driver prefers the same texture size on
+	// consecutive draw calls...
+	if (mergedwidth * mergedheight / 2 >= size*size*realcount)
+		mergedheight /= 2;
+
+	loadmodel->brushq3.num_lightmapmergedwidthpower = 0;
+	loadmodel->brushq3.num_lightmapmergedheightpower = 0;
+	while (mergedwidth > size<<loadmodel->brushq3.num_lightmapmergedwidthpower)
+		loadmodel->brushq3.num_lightmapmergedwidthpower++;
+	while (mergedheight > size<<loadmodel->brushq3.num_lightmapmergedheightpower)
+		loadmodel->brushq3.num_lightmapmergedheightpower++;
+	loadmodel->brushq3.num_lightmapmergedwidthheightdeluxepower = loadmodel->brushq3.num_lightmapmergedwidthpower + loadmodel->brushq3.num_lightmapmergedheightpower + (loadmodel->brushq3.deluxemapping ? 1 : 0);
+
+	powerx = loadmodel->brushq3.num_lightmapmergedwidthpower;
+	powery = loadmodel->brushq3.num_lightmapmergedheightpower;
+	powerxy = powerx+powery;
+	powerdxy = loadmodel->brushq3.deluxemapping + powerxy;
+
+	mergedcolumns = 1 << powerx;
+	mergedrows = 1 << powery;
+	mergedrowsxcolumns = 1 << powerxy;
+
+	loadmodel->brushq3.num_mergedlightmaps = (realcount + (1 << powerxy) - 1) >> powerxy;
 	loadmodel->brushq3.data_lightmaps = (rtexture_t **)Mem_Alloc(loadmodel->mempool, loadmodel->brushq3.num_mergedlightmaps * sizeof(rtexture_t *));
 	if (loadmodel->brushq3.deluxemapping)
 		loadmodel->brushq3.data_deluxemaps = (rtexture_t **)Mem_Alloc(loadmodel->mempool, loadmodel->brushq3.num_mergedlightmaps * sizeof(rtexture_t *));
@@ -4738,61 +4767,43 @@ static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
 	if (loadmodel->texturepool == NULL && cls.state != ca_dedicated)
 		loadmodel->texturepool = R_AllocTexturePool();
 
-	power = loadmodel->brushq3.num_lightmapmergepower;
-	power2 = power * 2;
-	mask = (1 << power) - 1;
+	mergedpixels = (unsigned char *) Mem_Alloc(tempmempool, mergedwidth * mergedheight * 4);
+	mergeddeluxepixels = loadmodel->brushq3.deluxemapping ? (unsigned char *) Mem_Alloc(tempmempool, mergedwidth * mergedheight * 4) : NULL;
 	for (i = 0;i < count;i++)
 	{
 		// figure out which merged lightmap texture this fits into
-		int lightmapindex = i >> (loadmodel->brushq3.deluxemapping + power2);
-		for (k = 0;k < size*size;k++)
-		{
-			convertedpixels[k*4+0] = inpixels[i][k*bytesperpixel+rgbmap[0]];
-			convertedpixels[k*4+1] = inpixels[i][k*bytesperpixel+rgbmap[1]];
-			convertedpixels[k*4+2] = inpixels[i][k*bytesperpixel+rgbmap[2]];
-			convertedpixels[k*4+3] = 255;
-		}
-		if (loadmodel->brushq3.num_lightmapmergepower > 0)
+		realindex = i >> (int)loadmodel->brushq3.deluxemapping;
+		lightmapindex = i >> powerdxy;
+
+		// choose the destination address
+		mergebuf = (loadmodel->brushq3.deluxemapping && (i & 1)) ? mergeddeluxepixels : mergedpixels;
+		mergebuf += 4 * (realindex & (mergedcolumns-1))*size + 4 * ((realindex >> powerx) & (mergedrows-1))*mergedwidth*size;
+		if ((i & 1) == 0 || !loadmodel->brushq3.deluxemapping)
+			Con_Printf("copying original lightmap %i (%ix%i) to %i (at %i,%i)\n", i, size, size, lightmapindex, (realindex & (mergedcolumns-1))*size, ((realindex >> powerx) & (mergedrows-1))*size);
+
+		// convert pixels from RGB or BGRA while copying them into the destination rectangle
+		for (j = 0;j < size;j++)
+		for (k = 0;k < size;k++)
 		{
-			// if the lightmap has not been allocated yet, create it
-			if (!loadmodel->brushq3.data_lightmaps[lightmapindex])
-			{
-				// create a lightmap only as large as necessary to hold the
-				// remaining size*size blocks
-				// if there are multiple merged lightmap textures then they will
-				// all be full size except the last one which may be smaller
-				// because it only needs to the remaining blocks, and it will often
-				// be odd sizes like 2048x512 due to only being 25% full or so.
-				j = (count >> (loadmodel->brushq3.deluxemapping ? 1 : 0)) - (lightmapindex << power2);
-				for (mergewidth = 1;mergewidth < j && mergewidth < (1 << power);mergewidth *= 2)
-					;
-				for (mergeheight = 1;mergewidth*mergeheight < j && mergeheight < (1 << power);mergeheight *= 2)
-					;
-				if (developer_loading.integer)
-					Con_Printf("lightmap merge texture #%i is %ix%i (%i of %i used)\n", lightmapindex, mergewidth*size, mergeheight*size, min(j, mergewidth*mergeheight), mergewidth*mergeheight);
-				loadmodel->brushq3.data_lightmaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), mergewidth * size, mergeheight * size, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), NULL);
-				if (loadmodel->brushq3.data_deluxemaps)
-					loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), mergewidth * size, mergeheight * size, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), NULL);
-			}
-			mergewidth = R_TextureWidth(loadmodel->brushq3.data_lightmaps[lightmapindex]) / size;
-			mergeheight = R_TextureHeight(loadmodel->brushq3.data_lightmaps[lightmapindex]) / size;
-			j = (i >> (loadmodel->brushq3.deluxemapping ? 1 : 0)) & ((1 << power2) - 1);
-			if (loadmodel->brushq3.deluxemapping && (i & 1))
-				R_UpdateTexture(loadmodel->brushq3.data_deluxemaps[lightmapindex], convertedpixels, (j % mergewidth) * size, (j / mergewidth) * size, size, size);
-			else
-				R_UpdateTexture(loadmodel->brushq3.data_lightmaps [lightmapindex], convertedpixels, (j % mergewidth) * size, (j / mergewidth) * size, size, size);
+			mergebuf[(j*mergedwidth+k)*4+0] = inpixels[i][(j*size+k)*bytesperpixel+rgbmap[0]];
+			mergebuf[(j*mergedwidth+k)*4+1] = inpixels[i][(j*size+k)*bytesperpixel+rgbmap[1]];
+			mergebuf[(j*mergedwidth+k)*4+2] = inpixels[i][(j*size+k)*bytesperpixel+rgbmap[2]];
+			mergebuf[(j*mergedwidth+k)*4+3] = 255;
 		}
-		else
+
+		// upload texture if this was the last tile being written to the texture
+		if (((realindex + 1) & (mergedrowsxcolumns - 1)) == 0 || (realindex + 1) == realcount)
 		{
-			// figure out which merged lightmap texture this fits into
 			if (loadmodel->brushq3.deluxemapping && (i & 1))
-				loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), size, size, convertedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), NULL);
+				loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), mergedwidth, mergedheight, mergeddeluxepixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), -1, NULL);
 			else
-				loadmodel->brushq3.data_lightmaps [lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), size, size, convertedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), NULL);
+				loadmodel->brushq3.data_lightmaps [lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), mergedwidth, mergedheight, mergedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), -1, NULL);
 		}
 	}
 
-	Mem_Free(convertedpixels);
+	if (mergeddeluxepixels)
+		Mem_Free(mergeddeluxepixels);
+	Mem_Free(mergedpixels);
 	if(external)
 	{
 		for(i = 0; i < count; ++i)
@@ -4805,9 +4816,9 @@ static void Mod_Q3BSP_BuildBBoxes(const int *element3i, int num_triangles, const
 	int j, k, cnt, tri;
 	float *mins, *maxs;
 	const float *vert;
+	*collisionstride = stride;
 	if(stride > 0)
 	{
-		*collisionstride = stride;
 		cnt = (num_triangles + stride - 1) / stride;
 		*collisionbbox6f = (float *) Mem_Alloc(loadmodel->mempool, sizeof(float[6]) * cnt);
 		for(j = 0; j < cnt; ++j)
@@ -4844,10 +4855,7 @@ static void Mod_Q3BSP_BuildBBoxes(const int *element3i, int num_triangles, const
 		}
 	}
 	else
-	{
-		*collisionstride = 0;
 		*collisionbbox6f = NULL;
-	}
 }
 
 typedef struct patchtess_s
@@ -4874,7 +4882,7 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 {
 	q3dface_t *in, *oldin;
 	msurface_t *out, *oldout;
-	int i, oldi, j, n, count, invalidelements, patchsize[2], finalwidth, finalheight, xtess, ytess, finalvertices, finaltriangles, firstvertex, firstelement, type, oldnumtriangles, oldnumtriangles2, meshvertices, meshtriangles, numvertices, numtriangles, cxtess, cytess;
+	int i, oldi, j, n, count, invalidelements, patchsize[2], finalwidth, finalheight, xtess, ytess, finalvertices, finaltriangles, firstvertex, firstelement, type, oldnumtriangles, oldnumtriangles2, meshvertices, meshtriangles, collisionvertices, collisiontriangles, numvertices, numtriangles, cxtess, cytess;
 	float lightmaptcbase[2], lightmaptcscale[2];
 	//int *originalelement3i;
 	//int *originalneighbor3i;
@@ -4885,6 +4893,8 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 	float *originalcolor4f;
 	float *originaltexcoordtexture2f;
 	float *originaltexcoordlightmap2f;
+	float *surfacecollisionvertex3f;
+	int *surfacecollisionelement3i;
 	float *v;
 	patchtess_t *patchtess = NULL;
 	int patchtesscount = 0;
@@ -4931,8 +4941,8 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 		n = LittleLong(in->effectindex);
 		if (n < -1 || n >= loadmodel->brushq3.num_effects)
 		{
-			if (developer.integer >= 100)
-				Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid effectindex %i (%i effects)\n", i, out->texture->name, n, loadmodel->brushq3.num_effects);
+			if (developer_extra.integer)
+				Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid effectindex %i (%i effects)\n", i, out->texture->name, n, loadmodel->brushq3.num_effects);
 			n = -1;
 		}
 		if (n == -1)
@@ -4955,9 +4965,10 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 			}
 			else
 			{
-				out->lightmaptexture = loadmodel->brushq3.data_lightmaps[n >> (loadmodel->brushq3.num_lightmapmergepower * 2 + loadmodel->brushq3.deluxemapping)];
+				out->lightmaptexture = loadmodel->brushq3.data_lightmaps[n >> loadmodel->brushq3.num_lightmapmergedwidthheightdeluxepower];
 				if (loadmodel->brushq3.deluxemapping)
-					out->deluxemaptexture = loadmodel->brushq3.data_deluxemaps[n >> (loadmodel->brushq3.num_lightmapmergepower * 2 + loadmodel->brushq3.deluxemapping)];
+					out->deluxemaptexture = loadmodel->brushq3.data_deluxemaps[n >> loadmodel->brushq3.num_lightmapmergedwidthheightdeluxepower];
+				loadmodel->lit = true;
 			}
 		}
 
@@ -5026,18 +5037,18 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 	 		patchtess[patchtesscount].info.lods[PATCH_LOD_COLLISION].ytess = cytess;
 	
 			patchtess[patchtesscount].surface_id = i;
-			patchtess[patchtesscount].lodgroup[0] = in->specific.patch.mins[0];
-			patchtess[patchtesscount].lodgroup[1] = in->specific.patch.mins[1];
-			patchtess[patchtesscount].lodgroup[2] = in->specific.patch.mins[2];
-			patchtess[patchtesscount].lodgroup[3] = in->specific.patch.maxs[0];
-			patchtess[patchtesscount].lodgroup[4] = in->specific.patch.maxs[1];
-			patchtess[patchtesscount].lodgroup[5] = in->specific.patch.maxs[2];
+			patchtess[patchtesscount].lodgroup[0] = LittleFloat(in->specific.patch.mins[0]);
+			patchtess[patchtesscount].lodgroup[1] = LittleFloat(in->specific.patch.mins[1]);
+			patchtess[patchtesscount].lodgroup[2] = LittleFloat(in->specific.patch.mins[2]);
+			patchtess[patchtesscount].lodgroup[3] = LittleFloat(in->specific.patch.maxs[0]);
+			patchtess[patchtesscount].lodgroup[4] = LittleFloat(in->specific.patch.maxs[1]);
+			patchtess[patchtesscount].lodgroup[5] = LittleFloat(in->specific.patch.maxs[2]);
 			patchtess[patchtesscount].originalvertex3f = originalvertex3f;
 			++patchtesscount;
 			break;
 		case Q3FACETYPE_FLARE:
-			if (developer.integer >= 100)
-				Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_FLARE not supported (yet)\n", i, out->texture->name);
+			if (developer_extra.integer)
+				Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_FLARE not supported (yet)\n", i, out->texture->name);
 			// don't render it
 			continue;
 		}
@@ -5066,6 +5077,8 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 	while (again);
 
 	// Calculate resulting number of triangles
+	collisionvertices = 0;
+	collisiontriangles = 0;
 	for(i = 0; i < patchtesscount; ++i)
 	{
 		finalwidth = Q3PatchDimForTess(patchtess[i].info.xsize, patchtess[i].info.lods[PATCH_LOD_VISUAL].xtess);
@@ -5077,14 +5090,31 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 		oldout[patchtess[i].surface_id].num_triangles = numtriangles;
 		meshvertices += oldout[patchtess[i].surface_id].num_vertices;
 		meshtriangles += oldout[patchtess[i].surface_id].num_triangles;
+
+		finalwidth = Q3PatchDimForTess(patchtess[i].info.xsize, patchtess[i].info.lods[PATCH_LOD_COLLISION].xtess);
+		finalheight = Q3PatchDimForTess(patchtess[i].info.ysize,patchtess[i].info.lods[PATCH_LOD_COLLISION].ytess);
+		numvertices = finalwidth * finalheight;
+		numtriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+
+		oldout[patchtess[i].surface_id].num_collisionvertices = numvertices;
+		oldout[patchtess[i].surface_id].num_collisiontriangles = numtriangles;
+		collisionvertices += oldout[patchtess[i].surface_id].num_collisionvertices;
+		collisiontriangles += oldout[patchtess[i].surface_id].num_collisiontriangles;
 	}
 
 	i = oldi;
 	in = oldin;
 	out = oldout;
 	Mod_AllocSurfMesh(loadmodel->mempool, meshvertices, meshtriangles, false, true, false);
+	if (collisiontriangles)
+	{
+		loadmodel->brush.data_collisionvertex3f = (float *)Mem_Alloc(loadmodel->mempool, collisionvertices * sizeof(float[3]));
+		loadmodel->brush.data_collisionelement3i = (int *)Mem_Alloc(loadmodel->mempool, collisiontriangles * sizeof(int[3]));
+	}
 	meshvertices = 0;
 	meshtriangles = 0;
+	collisionvertices = 0;
+	collisiontriangles = 0;
 	for (;i < count && meshvertices + out->num_vertices <= loadmodel->surfmesh.num_vertices;i++, in++, out++)
 	{
 		if (out->num_vertices < 3 || out->num_triangles < 1)
@@ -5095,6 +5125,7 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 		firstelement = LittleLong(in->firstelement);
 		out->num_firstvertex = meshvertices;
 		out->num_firsttriangle = meshtriangles;
+		out->num_firstcollisiontriangle = collisiontriangles;
 		switch(type)
 		{
 		case Q3FACETYPE_FLAT:
@@ -5148,7 +5179,7 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 			finalwidth = Q3PatchDimForTess(patchsize[0],xtess); //((patchsize[0] - 1) * xtess) + 1;
 			finalheight = Q3PatchDimForTess(patchsize[1],ytess); //((patchsize[1] - 1) * ytess) + 1;
 			finalvertices = finalwidth * finalheight;
-			finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+			oldnumtriangles = finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
 			type = Q3FACETYPE_MESH;
 			// generate geometry
 			// (note: normals are skipped because they get recalculated)
@@ -5161,40 +5192,62 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 
 			out->num_triangles = Mod_RemoveDegenerateTriangles(out->num_triangles, (loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle), (loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle), loadmodel->surfmesh.data_vertex3f);
 
-			if (developer.integer >= 100)
+			if (developer_extra.integer)
 			{
 				if (out->num_triangles < finaltriangles)
-					Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles, %i degenerate triangles removed (leaving %i)\n", patchsize[0], patchsize[1], out->num_vertices, finaltriangles, finaltriangles - out->num_triangles, out->num_triangles);
+					Con_DPrintf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles, %i degenerate triangles removed (leaving %i)\n", patchsize[0], patchsize[1], out->num_vertices, finaltriangles, finaltriangles - out->num_triangles, out->num_triangles);
 				else
-					Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles\n", patchsize[0], patchsize[1], out->num_vertices, out->num_triangles);
+					Con_DPrintf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles\n", patchsize[0], patchsize[1], out->num_vertices, out->num_triangles);
 			}
 			// q3map does not put in collision brushes for curves... ugh
 			// build the lower quality collision geometry
 			finalwidth = Q3PatchDimForTess(patchsize[0],cxtess); //((patchsize[0] - 1) * cxtess) + 1;
 			finalheight = Q3PatchDimForTess(patchsize[1],cytess); //((patchsize[1] - 1) * cytess) + 1;
 			finalvertices = finalwidth * finalheight;
-			finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+			oldnumtriangles2 = finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
 
-			out->data_collisionvertex3f = (float *)Mem_Alloc(loadmodel->mempool, sizeof(float[3]) * finalvertices);
-			out->data_collisionelement3i = (int *)Mem_Alloc(loadmodel->mempool, sizeof(int[3]) * finaltriangles);
+			// legacy collision geometry implementation
+			out->deprecatedq3data_collisionvertex3f = (float *)Mem_Alloc(loadmodel->mempool, sizeof(float[3]) * finalvertices);
+			out->deprecatedq3data_collisionelement3i = (int *)Mem_Alloc(loadmodel->mempool, sizeof(int[3]) * finaltriangles);
 			out->num_collisionvertices = finalvertices;
 			out->num_collisiontriangles = finaltriangles;
-			Q3PatchTesselateFloat(3, sizeof(float[3]), out->data_collisionvertex3f, patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, cxtess, cytess);
-			Q3PatchTriangleElements(out->data_collisionelement3i, finalwidth, finalheight, 0);
+			Q3PatchTesselateFloat(3, sizeof(float[3]), out->deprecatedq3data_collisionvertex3f, patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, cxtess, cytess);
+			Q3PatchTriangleElements(out->deprecatedq3data_collisionelement3i, finalwidth, finalheight, 0);
 
 			//Mod_SnapVertices(3, out->num_vertices, (loadmodel->surfmesh.data_vertex3f + 3 * out->num_firstvertex), 0.25);
-			Mod_SnapVertices(3, out->num_collisionvertices, out->data_collisionvertex3f, 1);
+			Mod_SnapVertices(3, finalvertices, out->deprecatedq3data_collisionvertex3f, 1);
 
-			oldnumtriangles = out->num_triangles;
-			oldnumtriangles2 = out->num_collisiontriangles;
-			out->num_collisiontriangles = Mod_RemoveDegenerateTriangles(out->num_collisiontriangles, out->data_collisionelement3i, out->data_collisionelement3i, out->data_collisionvertex3f);
+			out->num_collisiontriangles = Mod_RemoveDegenerateTriangles(finaltriangles, out->deprecatedq3data_collisionelement3i, out->deprecatedq3data_collisionelement3i, out->deprecatedq3data_collisionvertex3f);
 
 			// now optimize the collision mesh by finding triangle bboxes...
-			Mod_Q3BSP_BuildBBoxes(out->data_collisionelement3i, out->num_collisiontriangles, out->data_collisionvertex3f, &out->data_collisionbbox6f, &out->num_collisionbboxstride, mod_q3bsp_curves_collisions_stride.integer);
-			Mod_Q3BSP_BuildBBoxes(loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle, out->num_triangles, loadmodel->surfmesh.data_vertex3f, &out->data_bbox6f, &out->num_bboxstride, mod_q3bsp_curves_stride.integer);
+			Mod_Q3BSP_BuildBBoxes(out->deprecatedq3data_collisionelement3i, out->num_collisiontriangles, out->deprecatedq3data_collisionvertex3f, &out->deprecatedq3data_collisionbbox6f, &out->deprecatedq3num_collisionbboxstride, mod_q3bsp_curves_collisions_stride.integer);
+			Mod_Q3BSP_BuildBBoxes(loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle, out->num_triangles, loadmodel->surfmesh.data_vertex3f, &out->deprecatedq3data_bbox6f, &out->deprecatedq3num_bboxstride, mod_q3bsp_curves_stride.integer);
+
+			// store collision geometry for BIH collision tree
+			surfacecollisionvertex3f = loadmodel->brush.data_collisionvertex3f + collisionvertices * 3;
+			surfacecollisionelement3i = loadmodel->brush.data_collisionelement3i + collisiontriangles * 3;
+			Q3PatchTesselateFloat(3, sizeof(float[3]), surfacecollisionvertex3f, patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, cxtess, cytess);
+			Q3PatchTriangleElements(surfacecollisionelement3i, finalwidth, finalheight, collisionvertices);
+			Mod_SnapVertices(3, finalvertices, surfacecollisionvertex3f, 1);
+#if 1
+			// remove this once the legacy code is removed
+			{
+				int nc = out->num_collisiontriangles;
+#endif
+			out->num_collisiontriangles = Mod_RemoveDegenerateTriangles(finaltriangles, surfacecollisionelement3i, surfacecollisionelement3i, loadmodel->brush.data_collisionvertex3f);
+#if 1
+				if(nc != out->num_collisiontriangles)
+				{
+					Con_Printf("number of collision triangles differs between BIH and BSP. FAIL.\n");
+				}
+			}
+#endif
+
+			if (developer_extra.integer)
+				Con_DPrintf("Mod_Q3BSP_LoadFaces: %ix%i curve became %i:%i vertices / %i:%i triangles (%i:%i degenerate)\n", patchsize[0], patchsize[1], out->num_vertices, out->num_collisionvertices, oldnumtriangles, oldnumtriangles2, oldnumtriangles - out->num_triangles, oldnumtriangles2 - out->num_collisiontriangles);
 
-			if (developer.integer >= 100)
-				Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve became %i:%i vertices / %i:%i triangles (%i:%i degenerate)\n", patchsize[0], patchsize[1], out->num_vertices, out->num_collisionvertices, oldnumtriangles, oldnumtriangles2, oldnumtriangles - out->num_triangles, oldnumtriangles2 - out->num_collisiontriangles);
+			collisionvertices += finalvertices;
+			collisiontriangles += out->num_collisiontriangles;
 			break;
 		default:
 			break;
@@ -5270,13 +5323,20 @@ static void Mod_Q3BSP_LoadFaces(lump_t *l)
 		if(out->num_vertices && out->num_triangles)
 			continue;
 		if(out->num_vertices == 0)
-			Con_Printf("Mod_Q3BSP_LoadFaces: surface %d has no vertices, ignoring\n", i);
-		if(out->num_triangles == 0)
-			Con_Printf("Mod_Q3BSP_LoadFaces: surface %d has no triangles, ignoring\n", i);
+		{
+			Con_Printf("Mod_Q3BSP_LoadFaces: surface %d (texture %s) has no vertices, ignoring\n", i, out->texture ? out->texture->name : "(none)");
+			if(out->num_triangles == 0)
+				Con_Printf("Mod_Q3BSP_LoadFaces: surface %d (texture %s) has no triangles, ignoring\n", i, out->texture ? out->texture->name : "(none)");
+		}
+		else if(out->num_triangles == 0)
+			Con_Printf("Mod_Q3BSP_LoadFaces: surface %d (texture %s, near %f %f %f) has no triangles, ignoring\n", i, out->texture ? out->texture->name : "(none)",
+					(loadmodel->surfmesh.data_vertex3f + 3 * out->num_firstvertex)[0 * 3 + 0],
+					(loadmodel->surfmesh.data_vertex3f + 3 * out->num_firstvertex)[1 * 3 + 0],
+					(loadmodel->surfmesh.data_vertex3f + 3 * out->num_firstvertex)[2 * 3 + 0]);
 	}
 
 	// for per pixel lighting
-	Mod_BuildTextureVectorsFromNormals(0, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_texcoordtexture2f, loadmodel->surfmesh.data_normal3f, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.data_svector3f, loadmodel->surfmesh.data_tvector3f, true);
+	Mod_BuildTextureVectorsFromNormals(0, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_texcoordtexture2f, loadmodel->surfmesh.data_normal3f, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.data_svector3f, loadmodel->surfmesh.data_tvector3f, r_smoothnormals_areaweighting.integer != 0);
 
 	// generate ushort elements array if possible
 	if (loadmodel->surfmesh.data_element3s)
@@ -5509,7 +5569,10 @@ static void Mod_Q3BSP_LoadLightGrid(lump_t *l)
 	if (l->filelen)
 	{
 		if (l->filelen < count * (int)sizeof(*in))
-			Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)", l->filelen, (int)(count * sizeof(*in)), loadmodel->brushq3.num_lightgrid_isize[0], loadmodel->brushq3.num_lightgrid_isize[1], loadmodel->brushq3.num_lightgrid_isize[2]);
+		{
+			Con_Printf("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)", l->filelen, (int)(count * sizeof(*in)), loadmodel->brushq3.num_lightgrid_isize[0], loadmodel->brushq3.num_lightgrid_isize[1], loadmodel->brushq3.num_lightgrid_isize[2]);
+			return; // ignore the grid if we cannot understand it
+		}
 		if (l->filelen != count * (int)sizeof(*in))
 			Con_Printf("Mod_Q3BSP_LoadLightGrid: Warning: calculated lightgrid size %i bytes does not match lump size %i\n", (int)(count * sizeof(*in)), l->filelen);
 		out = (q3dlightgrid_t *)Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
@@ -5565,7 +5628,10 @@ static void Mod_Q3BSP_LightPoint(dp_model_t *model, const vec3_t p, vec3_t ambie
 	q3dlightgrid_t *a, *s;
 
 	// scale lighting by lightstyle[0] so that darkmode in dpmod works properly
-	stylescale = r_refdef.scene.rtlightstylevalue[0];
+	if (vid.renderpath == RENDERPATH_GL20)
+		stylescale = 1; // added while render
+	else
+		stylescale = r_refdef.scene.rtlightstylevalue[0];
 
 	if (!model->brushq3.num_lightgrid)
 	{
@@ -5623,23 +5689,643 @@ static void Mod_Q3BSP_LightPoint(dp_model_t *model, const vec3_t p, vec3_t ambie
 	//Con_Printf("result: ambient %f %f %f diffuse %f %f %f diffusenormal %f %f %f\n", ambientcolor[0], ambientcolor[1], ambientcolor[2], diffusecolor[0], diffusecolor[1], diffusecolor[2], diffusenormal[0], diffusenormal[1], diffusenormal[2]);
 }
 
-static void Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace_t *trace, dp_model_t *model, mnode_t *node, const vec3_t point, int markframe)
+static int Mod_Q3BSP_TraceLineOfSight_RecursiveNodeCheck(mnode_t *node, double p1[3], double p2[3])
 {
-	int i;
-	mleaf_t *leaf;
-	colbrushf_t *brush;
-	// find which leaf the point is in
+	double t1, t2;
+	double midf, mid[3];
+	int ret, side;
+
+	// check for empty
 	while (node->plane)
-		node = node->children[(node->plane->type < 3 ? point[node->plane->type] : DotProduct(point, node->plane->normal)) < node->plane->dist];
-	// point trace the brushes
-	leaf = (mleaf_t *)node;
-	for (i = 0;i < leaf->numleafbrushes;i++)
 	{
-		brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
-		if (brush && brush->markframe != markframe && BoxesOverlap(point, point, brush->mins, brush->maxs))
+		// find the point distances
+		mplane_t *plane = node->plane;
+		if (plane->type < 3)
 		{
-			brush->markframe = markframe;
-			Collision_TracePointBrushFloat(trace, point, brush);
+			t1 = p1[plane->type] - plane->dist;
+			t2 = p2[plane->type] - plane->dist;
+		}
+		else
+		{
+			t1 = DotProduct (plane->normal, p1) - plane->dist;
+			t2 = DotProduct (plane->normal, p2) - plane->dist;
+		}
+
+		if (t1 < 0)
+		{
+			if (t2 < 0)
+			{
+				node = node->children[1];
+				continue;
+			}
+			side = 1;
+		}
+		else
+		{
+			if (t2 >= 0)
+			{
+				node = node->children[0];
+				continue;
+			}
+			side = 0;
+		}
+
+		midf = t1 / (t1 - t2);
+		VectorLerp(p1, midf, p2, mid);
+
+		// recurse both sides, front side first
+		// return 2 if empty is followed by solid (hit something)
+		// do not return 2 if both are solid or both empty,
+		// or if start is solid and end is empty
+		// as these degenerate cases usually indicate the eye is in solid and
+		// should see the target point anyway
+		ret = Mod_Q3BSP_TraceLineOfSight_RecursiveNodeCheck(node->children[side    ], p1, mid);
+		if (ret != 0)
+			return ret;
+		ret = Mod_Q3BSP_TraceLineOfSight_RecursiveNodeCheck(node->children[side ^ 1], mid, p2);
+		if (ret != 1)
+			return ret;
+		return 2;
+	}
+	return ((mleaf_t *)node)->clusterindex < 0;
+}
+
+static qboolean Mod_Q3BSP_TraceLineOfSight(struct model_s *model, const vec3_t start, const vec3_t end)
+{
+	if (model->brush.submodel || mod_q3bsp_tracelineofsight_brushes.integer)
+	{
+		trace_t trace;
+		model->TraceLine(model, NULL, NULL, &trace, start, end, SUPERCONTENTS_VISBLOCKERMASK);
+		return trace.fraction == 1;
+	}
+	else
+	{
+		double tracestart[3], traceend[3];
+		VectorCopy(start, tracestart);
+		VectorCopy(end, traceend);
+		return !Mod_Q3BSP_TraceLineOfSight_RecursiveNodeCheck(model->brush.data_nodes, tracestart, traceend);
+	}
+}
+
+static void Mod_CollisionBIH_TracePoint_RecursiveBIHNode(trace_t *trace, dp_model_t *model, int nodenum, const vec3_t point)
+{
+	const bih_leaf_t *leaf;
+	const bih_node_t *node;
+	const colbrushf_t *brush;
+	int axis;
+	while (nodenum >= 0)
+	{
+		node = model->collision_bih.nodes + nodenum;
+		axis = node->type - BIH_SPLITX;
+		if (point[axis] <= node->backmax)
+		{
+			if (point[axis] >= node->frontmin)
+				Mod_CollisionBIH_TracePoint_RecursiveBIHNode(trace, model, node->front, point);
+			nodenum = node->back;
+		}
+		else if (point[axis] >= node->frontmin)
+			nodenum = node->front;
+		else // no overlap with either child?  just return
+			return;
+	}
+	if (!model->collision_bih.leafs)
+		return;
+	leaf = model->collision_bih.leafs + (-1-nodenum);
+	switch(leaf->type)
+	{
+	case BIH_BRUSH:
+		brush = model->brush.data_brushes[leaf->itemindex].colbrushf;
+		Collision_TracePointBrushFloat(trace, point, brush);
+		break;
+	case BIH_COLLISIONTRIANGLE:
+		// collision triangle - skipped because they have no volume
+		break;
+	case BIH_RENDERTRIANGLE:
+		// render triangle - skipped because they have no volume
+		break;
+	}
+}
+
+static void Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace_t *trace, dp_model_t *model, int nodenum, const vec3_t start, const vec3_t end, const vec3_t linestart, const vec3_t lineend)
+{
+	const bih_leaf_t *leaf;
+	const bih_node_t *node;
+	const colbrushf_t *brush;
+	const int *e;
+	const texture_t *texture;
+	int axis;
+#define BIHLINECLIP
+#ifdef BIHLINECLIP
+	int sideflags;
+	vec_t frontdist1;
+	vec_t frontdist2;
+	vec_t frontfrac;
+	vec_t backdist1;
+	vec_t backdist2;
+	vec_t backfrac;
+	vec3_t clipped, newstart, newend;
+#endif
+	vec3_t segmentmins;
+	vec3_t segmentmaxs;
+	segmentmins[0] = min(start[0], end[0]);
+	segmentmins[1] = min(start[1], end[1]);
+	segmentmins[2] = min(start[2], end[2]);
+	segmentmaxs[0] = max(start[0], end[0]);
+	segmentmaxs[1] = max(start[1], end[1]);
+	segmentmaxs[2] = max(start[2], end[2]);
+	while (nodenum >= 0)
+	{
+		node = model->collision_bih.nodes + nodenum;
+#if 0
+		if (!BoxesOverlap(segmentmins, segmentmaxs, node->mins, node->maxs))
+			return;
+#endif
+		axis = node->type - BIH_SPLITX;
+#if 0
+		if (segmentmins[axis] <= node->backmax)
+		{
+			if (segmentmaxs[axis] >= node->frontmin)
+				Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+			nodenum = node->back;
+		}
+		else if (segmentmaxs[axis] >= node->frontmin)
+			nodenum = node->front;
+		else
+			return; // trace falls between children
+#else
+		frontdist1 = start[axis] - node->frontmin;
+		frontdist2 = end[axis] - node->frontmin;
+		backdist1 = start[axis] - node->backmax;
+		backdist2 = end[axis] - node->backmax;
+		sideflags = 0;
+		if (frontdist1 < 0)
+			sideflags |= 1;
+		if (frontdist2 < 0)
+			sideflags |= 2;
+		if (backdist1 < 0)
+			sideflags |= 4;
+		if (backdist2 < 0)
+			sideflags |= 8;
+#if 0
+		if (sideflags & 12)
+		{
+			if ((sideflags & 3) != 3)
+				Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+			nodenum = node->back;
+		}
+		else if ((sideflags & 3) != 3)
+			nodenum = node->front;
+		else
+			return; // trace falls between children
+#else
+		switch(sideflags)
+		{
+		case 0:
+			// start end START END
+			nodenum = node->front;
+			continue;
+		case 1:
+			// START end START END
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, newstart); start = newstart;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#endif
+			nodenum = node->front;
+			break;
+		case 2:
+#ifdef BIHLINECLIP
+			// start END START END
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, newend); end = newend;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#endif
+			nodenum = node->front;
+			break;
+		case 3:
+			// START END START END
+			return; // line falls in gap between children
+		case 4:
+			// start end start END
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#ifdef BIHLINECLIP
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newend); end = newend;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#endif
+			nodenum = node->back;
+			break;
+		case 5:
+			// START end start END
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, clipped);
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, clipped, end, linestart, lineend);
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newend); end = newend;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#else
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#endif
+			nodenum = node->back;
+			break;
+		case 6:
+			// start END start END
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, clipped);
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, clipped, linestart, lineend);
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newend); end = newend;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#else
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#endif
+			nodenum = node->back;
+			break;
+		case 7:
+			// START END start END
+#ifdef BIHLINECLIP
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newend); end = newend;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#endif
+			nodenum = node->back;
+			break;
+		case 8:
+			// start end START end
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#ifdef BIHLINECLIP
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newstart); start = newstart;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#endif
+			nodenum = node->back;
+			break;
+		case 9:
+			// START end START end
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, clipped);
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, clipped, end, linestart, lineend);
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newstart); start = newstart;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#else
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#endif
+			nodenum = node->back;
+			break;
+		case 10:
+			// start END START end
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, clipped);
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, clipped, linestart, lineend);
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newstart); start = newstart;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#else
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#endif
+			nodenum = node->back;
+			break;
+		case 11:
+			// START END START end
+#ifdef BIHLINECLIP
+			backfrac = backdist1 / (backdist1 - backdist2);
+			VectorLerp(start, backfrac, end, newstart); start = newstart;
+			segmentmins[0] = min(start[0], end[0]);
+			segmentmins[1] = min(start[1], end[1]);
+			segmentmins[2] = min(start[2], end[2]);
+			segmentmaxs[0] = max(start[0], end[0]);
+			segmentmaxs[1] = max(start[1], end[1]);
+			segmentmaxs[2] = max(start[2], end[2]);
+#endif
+			nodenum = node->back;
+			break;
+		case 12:
+			// start end start end
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+			nodenum = node->back;
+			break;
+		case 13:
+			// START end start end
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, clipped);
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, clipped, end, linestart, lineend);
+#else
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#endif
+			nodenum = node->back;
+			break;
+		case 14:
+			// start END start end
+#ifdef BIHLINECLIP
+			frontfrac = frontdist1 / (frontdist1 - frontdist2);
+			VectorLerp(start, frontfrac, end, clipped);
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, clipped, linestart, lineend);
+#else
+			Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, node->front, start, end, linestart, lineend);
+#endif
+			nodenum = node->back;
+			break;
+		case 15:
+			// START END start end
+			nodenum = node->back;
+			continue;
+		}
+#endif
+#endif
+	}
+	if (!model->collision_bih.leafs)
+		return;
+	leaf = model->collision_bih.leafs + (-1-nodenum);
+#if 1
+	if (!BoxesOverlap(segmentmins, segmentmaxs, leaf->mins, leaf->maxs))
+		return;
+#endif
+	switch(leaf->type)
+	{
+	case BIH_BRUSH:
+		brush = model->brush.data_brushes[leaf->itemindex].colbrushf;
+		Collision_TraceLineBrushFloat(trace, linestart, lineend, brush, brush);
+		break;
+	case BIH_COLLISIONTRIANGLE:
+		if (!mod_q3bsp_curves_collisions.integer)
+			return;
+		e = model->brush.data_collisionelement3i + 3*leaf->itemindex;
+		texture = model->data_textures + leaf->textureindex;
+		Collision_TraceLineTriangleFloat(trace, linestart, lineend, model->brush.data_collisionvertex3f + e[0] * 3, model->brush.data_collisionvertex3f + e[1] * 3, model->brush.data_collisionvertex3f + e[2] * 3, texture->supercontents, texture->surfaceflags, texture);
+		break;
+	case BIH_RENDERTRIANGLE:
+		e = model->surfmesh.data_element3i + 3*leaf->itemindex;
+		texture = model->data_textures + leaf->textureindex;
+		Collision_TraceLineTriangleFloat(trace, linestart, lineend, model->surfmesh.data_vertex3f + e[0] * 3, model->surfmesh.data_vertex3f + e[1] * 3, model->surfmesh.data_vertex3f + e[2] * 3, texture->supercontents, texture->surfaceflags, texture);
+		break;
+	}
+}
+
+static void Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace_t *trace, dp_model_t *model, int nodenum, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, const vec3_t segmentmins, const vec3_t segmentmaxs)
+{
+	const bih_leaf_t *leaf;
+	const bih_node_t *node;
+	const colbrushf_t *brush;
+	const int *e;
+	const texture_t *texture;
+	int axis;
+	while (nodenum >= 0)
+	{
+		node = model->collision_bih.nodes + nodenum;
+		axis = node->type - BIH_SPLITX;
+#if 1
+		if (!BoxesOverlap(segmentmins, segmentmaxs, node->mins, node->maxs))
+			return;
+#endif
+#if 0
+		Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace, model, node->front, thisbrush_start, thisbrush_end, segmentmins, segmentmaxs);
+		nodenum = node->back;
+		continue;
+#endif
+		if (segmentmins[axis] <= node->backmax)
+		{
+			if (segmentmaxs[axis] >= node->frontmin)
+				Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace, model, node->front, thisbrush_start, thisbrush_end, segmentmins, segmentmaxs);
+			nodenum = node->back;
+		}
+		else if (segmentmaxs[axis] >= node->frontmin)
+			nodenum = node->front;
+		else
+			return; // trace falls between children
+	}
+	if (!model->collision_bih.leafs)
+		return;
+	leaf = model->collision_bih.leafs + (-1-nodenum);
+#if 1
+	if (!BoxesOverlap(segmentmins, segmentmaxs, leaf->mins, leaf->maxs))
+		return;
+#endif
+	switch(leaf->type)
+	{
+	case BIH_BRUSH:
+		brush = model->brush.data_brushes[leaf->itemindex].colbrushf;
+		Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, brush, brush);
+		break;
+	case BIH_COLLISIONTRIANGLE:
+		if (!mod_q3bsp_curves_collisions.integer)
+			return;
+		e = model->brush.data_collisionelement3i + 3*leaf->itemindex;
+		texture = model->data_textures + leaf->textureindex;
+		Collision_TraceBrushTriangleFloat(trace, thisbrush_start, thisbrush_end, model->brush.data_collisionvertex3f + e[0] * 3, model->brush.data_collisionvertex3f + e[1] * 3, model->brush.data_collisionvertex3f + e[2] * 3, texture->supercontents, texture->surfaceflags, texture);
+		break;
+	case BIH_RENDERTRIANGLE:
+		e = model->surfmesh.data_element3i + 3*leaf->itemindex;
+		texture = model->data_textures + leaf->textureindex;
+		Collision_TraceBrushTriangleFloat(trace, thisbrush_start, thisbrush_end, model->surfmesh.data_vertex3f + e[0] * 3, model->surfmesh.data_vertex3f + e[1] * 3, model->surfmesh.data_vertex3f + e[2] * 3, texture->supercontents, texture->surfaceflags, texture);
+		break;
+	}
+}
+
+void Mod_CollisionBIH_TracePoint(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, int hitsupercontentsmask)
+{
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+	Mod_CollisionBIH_TracePoint_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start);
+}
+
+void Mod_CollisionBIH_TraceLine(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
+{
+	if (VectorCompare(start, end))
+	{
+		Mod_CollisionBIH_TracePoint(model, frameblend, skeleton, trace, start, hitsupercontentsmask);
+		return;
+	}
+
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+	Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start, end, start, end);
+}
+
+void Mod_CollisionBIH_TraceBox(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, const vec3_t boxmins, const vec3_t boxmaxs, const vec3_t end, int hitsupercontentsmask)
+{
+	float segmentmins[3], segmentmaxs[3];
+	colboxbrushf_t thisbrush_start, thisbrush_end;
+	vec3_t boxstartmins, boxstartmaxs, boxendmins, boxendmaxs;
+
+	if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(boxmins, boxmaxs))
+	{
+		vec3_t shiftstart, shiftend;
+		VectorAdd(start, boxmins, shiftstart);
+		VectorAdd(end, boxmins, shiftend);
+		if (VectorCompare(start, end))
+			Mod_CollisionBIH_TracePoint(model, frameblend, skeleton, trace, shiftstart, hitsupercontentsmask);
+		else
+			Mod_CollisionBIH_TraceLine(model, frameblend, skeleton, trace, shiftstart, shiftend, hitsupercontentsmask);
+		return;
+	}
+
+	// box trace, performed as brush trace
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+	segmentmins[0] = min(start[0], end[0]) + boxmins[0] - 1;
+	segmentmins[1] = min(start[1], end[1]) + boxmins[1] - 1;
+	segmentmins[2] = min(start[2], end[2]) + boxmins[2] - 1;
+	segmentmaxs[0] = max(start[0], end[0]) + boxmaxs[0] + 1;
+	segmentmaxs[1] = max(start[1], end[1]) + boxmaxs[1] + 1;
+	segmentmaxs[2] = max(start[2], end[2]) + boxmaxs[2] + 1;
+	VectorAdd(start, boxmins, boxstartmins);
+	VectorAdd(start, boxmaxs, boxstartmaxs);
+	VectorAdd(end, boxmins, boxendmins);
+	VectorAdd(end, boxmaxs, boxendmaxs);
+	Collision_BrushForBox(&thisbrush_start, boxstartmins, boxstartmaxs, 0, 0, NULL);
+	Collision_BrushForBox(&thisbrush_end, boxendmins, boxendmaxs, 0, 0, NULL);
+	Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, &thisbrush_start.brush, &thisbrush_end.brush, segmentmins, segmentmaxs);
+}
+
+void Mod_CollisionBIH_TraceBrush(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, colbrushf_t *start, colbrushf_t *end, int hitsupercontentsmask)
+{
+	float segmentmins[3], segmentmaxs[3];
+
+	if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(start->mins, start->maxs) && VectorCompare(end->mins, end->maxs))
+	{
+		if (VectorCompare(start->mins, end->mins))
+			Mod_CollisionBIH_TracePoint(model, frameblend, skeleton, trace, start->mins, hitsupercontentsmask);
+		else
+			Mod_CollisionBIH_TraceLine(model, frameblend, skeleton, trace, start->mins, end->mins, hitsupercontentsmask);
+		return;
+	}
+
+	// box trace, performed as brush trace
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+	segmentmins[0] = min(start->mins[0], end->mins[0]);
+	segmentmins[1] = min(start->mins[1], end->mins[1]);
+	segmentmins[2] = min(start->mins[2], end->mins[2]);
+	segmentmaxs[0] = max(start->maxs[0], end->maxs[0]);
+	segmentmaxs[1] = max(start->maxs[1], end->maxs[1]);
+	segmentmaxs[2] = max(start->maxs[2], end->maxs[2]);
+	Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start, end, segmentmins, segmentmaxs);
+}
+
+int Mod_CollisionBIH_PointSuperContents(struct model_s *model, int frame, const vec3_t point)
+{
+	trace_t trace;
+	Mod_CollisionBIH_TracePoint(model, NULL, NULL, &trace, point, 0);
+	return trace.startsupercontents;
+}
+
+void Mod_CollisionBIH_TracePoint_Mesh(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, int hitsupercontentsmask)
+{
+#if 0
+	// broken - needs to be modified to count front faces and backfaces to figure out if it is in solid
+	vec3_t end;
+	int hitsupercontents;
+	VectorSet(end, start[0], start[1], model->normalmins[2]);
+#endif
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+#if 0
+	Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start, end, start, end);
+	hitsupercontents = trace->hitsupercontents;
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+	trace->startsupercontents = hitsupercontents;
+#endif
+}
+
+int Mod_CollisionBIH_PointSuperContents_Mesh(struct model_s *model, int frame, const vec3_t start)
+{
+#if 0
+	// broken - needs to be modified to count front faces and backfaces to figure out if it is in solid
+	trace_t trace;
+	vec3_t end;
+	VectorSet(end, start[0], start[1], model->normalmins[2]);
+	memset(&trace, 0, sizeof(trace));
+	trace.fraction = 1;
+	trace.realfraction = 1;
+	trace.hitsupercontentsmask = 0;
+	Mod_CollisionBIH_TraceLine_RecursiveBIHNode(&trace, model, model->collision_bih.rootnode, start, end, start, end);
+	return trace.hitsupercontents;
+#else
+	return 0;
+#endif
+}
+
+static void Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace_t *trace, dp_model_t *model, mnode_t *node, const vec3_t point, int markframe)
+{
+	int i;
+	mleaf_t *leaf;
+	colbrushf_t *brush;
+	// find which leaf the point is in
+	while (node->plane)
+		node = node->children[(node->plane->type < 3 ? point[node->plane->type] : DotProduct(point, node->plane->normal)) < node->plane->dist];
+	// point trace the brushes
+	leaf = (mleaf_t *)node;
+	for (i = 0;i < leaf->numleafbrushes;i++)
+	{
+		brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
+		if (brush && brush->markframe != markframe && BoxesOverlap(point, point, brush->mins, brush->maxs))
+		{
+			brush->markframe = markframe;
+			Collision_TracePointBrushFloat(trace, point, brush);
 		}
 	}
 	// can't do point traces on curves (they have no thickness)
@@ -5656,6 +6342,12 @@ static void Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace_t *trace, dp_model_t *mod
 	// walk the tree until we hit a leaf, recursing for any split cases
 	while (node->plane)
 	{
+#if 0
+		if (!BoxesOverlap(segmentmins, segmentmaxs, node->mins, node->maxs))
+			return;
+		Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, node->children[0], start, end, startfrac, endfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+		node = node->children[1];
+#else
 		// abort if this part of the bsp tree can not be hit by this trace
 //		if (!(node->combinedsupercontents & trace->hitsupercontentsmask))
 //			return;
@@ -5694,6 +6386,7 @@ static void Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace_t *trace, dp_model_t *mod
 				Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, node->children[endside], mid, end, midfrac, endfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
 			return;
 		}
+#endif
 	}
 	// abort if this part of the bsp tree can not be hit by this trace
 //	if (!(node->combinedsupercontents & trace->hitsupercontentsmask))
@@ -5707,6 +6400,10 @@ static void Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace_t *trace, dp_model_t *mod
 	nodesegmentmaxs[2] = max(start[2], end[2]) + 1;
 	// line trace the brushes
 	leaf = (mleaf_t *)node;
+#if 0
+	if (!BoxesOverlap(segmentmins, segmentmaxs, leaf->mins, leaf->maxs))
+		return;
+#endif
 	for (i = 0;i < leaf->numleafbrushes;i++)
 	{
 		brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
@@ -5723,10 +6420,10 @@ static void Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace_t *trace, dp_model_t *mod
 		for (i = 0;i < leaf->numleafsurfaces;i++)
 		{
 			surface = model->data_surfaces + leaf->firstleafsurface[i];
-			if (surface->num_collisiontriangles && surface->collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, surface->mins, surface->maxs))
+			if (surface->num_collisiontriangles && surface->deprecatedq3collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, surface->mins, surface->maxs))
 			{
-				surface->collisionmarkframe = markframe;
-				Collision_TraceLineTriangleMeshFloat(trace, linestart, lineend, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->num_collisionbboxstride, surface->data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
+				surface->deprecatedq3collisionmarkframe = markframe;
+				Collision_TraceLineTriangleMeshFloat(trace, linestart, lineend, surface->num_collisiontriangles, surface->deprecatedq3data_collisionelement3i, surface->deprecatedq3data_collisionvertex3f, surface->deprecatedq3num_collisionbboxstride, surface->deprecatedq3data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
 			}
 		}
 	}
@@ -5744,6 +6441,12 @@ static void Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace_t *trace, dp_model_t *mo
 	// walk the tree until we hit a leaf, recursing for any split cases
 	while (node->plane)
 	{
+#if 0
+		if (!BoxesOverlap(segmentmins, segmentmaxs, node->mins, node->maxs))
+			return;
+		Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+		node = node->children[1];
+#else
 		// abort if this part of the bsp tree can not be hit by this trace
 //		if (!(node->combinedsupercontents & trace->hitsupercontentsmask))
 //			return;
@@ -5778,6 +6481,7 @@ static void Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace_t *trace, dp_model_t *mo
 			return; // ERROR: NAN bounding box!
 		// take whichever side the segment box is on
 		node = node->children[sides - 1];
+#endif
 	}
 	// abort if this part of the bsp tree can not be hit by this trace
 //	if (!(node->combinedsupercontents & trace->hitsupercontentsmask))
@@ -5790,6 +6494,10 @@ static void Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace_t *trace, dp_model_t *mo
 	nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2] + 1);
 	// hit a leaf
 	leaf = (mleaf_t *)node;
+#if 0
+	if (!BoxesOverlap(segmentmins, segmentmaxs, leaf->mins, leaf->maxs))
+		return;
+#endif
 	for (i = 0;i < leaf->numleafbrushes;i++)
 	{
 		brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
@@ -5804,18 +6512,19 @@ static void Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace_t *trace, dp_model_t *mo
 		for (i = 0;i < leaf->numleafsurfaces;i++)
 		{
 			surface = model->data_surfaces + leaf->firstleafsurface[i];
-			if (surface->num_collisiontriangles && surface->collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, surface->mins, surface->maxs))
+			if (surface->num_collisiontriangles && surface->deprecatedq3collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, surface->mins, surface->maxs))
 			{
-				surface->collisionmarkframe = markframe;
-				Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->num_collisionbboxstride, surface->data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
+				surface->deprecatedq3collisionmarkframe = markframe;
+				Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, surface->num_collisiontriangles, surface->deprecatedq3data_collisionelement3i, surface->deprecatedq3data_collisionvertex3f, surface->deprecatedq3num_collisionbboxstride, surface->deprecatedq3data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
 			}
 		}
 	}
 }
 
+
 static int markframe = 0;
 
-static void Mod_Q3BSP_TracePoint(dp_model_t *model, int frame, trace_t *trace, const vec3_t start, int hitsupercontentsmask)
+static void Mod_Q3BSP_TracePoint(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, int hitsupercontentsmask)
 {
 	int i;
 	q3mbrush_t *brush;
@@ -5823,7 +6532,9 @@ static void Mod_Q3BSP_TracePoint(dp_model_t *model, int frame, trace_t *trace, c
 	trace->fraction = 1;
 	trace->realfraction = 1;
 	trace->hitsupercontentsmask = hitsupercontentsmask;
-	if (model->brush.submodel)
+	if (mod_collision_bih.integer)
+		Mod_CollisionBIH_TracePoint_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start);
+	else if (model->brush.submodel)
 	{
 		for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
 			if (brush->colbrushf)
@@ -5833,7 +6544,7 @@ static void Mod_Q3BSP_TracePoint(dp_model_t *model, int frame, trace_t *trace, c
 		Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace, model, model->brush.data_nodes, start, ++markframe);
 }
 
-static void Mod_Q3BSP_TraceLine(dp_model_t *model, int frame, trace_t *trace, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
+static void Mod_Q3BSP_TraceLine(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
 {
 	int i;
 	float segmentmins[3], segmentmaxs[3];
@@ -5842,7 +6553,7 @@ static void Mod_Q3BSP_TraceLine(dp_model_t *model, int frame, trace_t *trace, co
 
 	if (VectorCompare(start, end))
 	{
-		Mod_Q3BSP_TracePoint(model, frame, trace, start, hitsupercontentsmask);
+		Mod_Q3BSP_TracePoint(model, frameblend, skeleton, trace, start, hitsupercontentsmask);
 		return;
 	}
 
@@ -5856,41 +6567,89 @@ static void Mod_Q3BSP_TraceLine(dp_model_t *model, int frame, trace_t *trace, co
 	segmentmaxs[0] = max(start[0], end[0]) + 1;
 	segmentmaxs[1] = max(start[1], end[1]) + 1;
 	segmentmaxs[2] = max(start[2], end[2]) + 1;
-	if (model->brush.submodel)
+	if (mod_collision_bih.integer)
+		Mod_CollisionBIH_TraceLine_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start, end, start, end);
+	else if (model->brush.submodel)
+	{
+		for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
+			if (brush->colbrushf && BoxesOverlap(segmentmins, segmentmaxs, brush->colbrushf->mins, brush->colbrushf->maxs))
+				Collision_TraceLineBrushFloat(trace, start, end, brush->colbrushf, brush->colbrushf);
+		if (mod_q3bsp_curves_collisions.integer)
+			for (i = 0, surface = model->data_surfaces + model->firstmodelsurface;i < model->nummodelsurfaces;i++, surface++)
+				if (surface->num_collisiontriangles && BoxesOverlap(segmentmins, segmentmaxs, surface->mins, surface->maxs))
+					Collision_TraceLineTriangleMeshFloat(trace, start, end, surface->num_collisiontriangles, surface->deprecatedq3data_collisionelement3i, surface->deprecatedq3data_collisionvertex3f, surface->deprecatedq3num_collisionbboxstride, surface->deprecatedq3data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
+	}
+	else
+		Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, model->brush.data_nodes, start, end, 0, 1, start, end, ++markframe, segmentmins, segmentmaxs);
+}
+
+static void Mod_Q3BSP_TraceBox(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, const vec3_t start, const vec3_t boxmins, const vec3_t boxmaxs, const vec3_t end, int hitsupercontentsmask)
+{
+	int i;
+	float segmentmins[3], segmentmaxs[3];
+	msurface_t *surface;
+	q3mbrush_t *brush;
+	colboxbrushf_t thisbrush_start, thisbrush_end;
+	vec3_t boxstartmins, boxstartmaxs, boxendmins, boxendmaxs;
+
+	if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(boxmins, boxmaxs))
+	{
+		vec3_t shiftstart, shiftend;
+		VectorAdd(start, boxmins, shiftstart);
+		VectorAdd(end, boxmins, shiftend);
+		if (VectorCompare(start, end))
+			Mod_Q3BSP_TracePoint(model, frameblend, skeleton, trace, shiftstart, hitsupercontentsmask);
+		else
+			Mod_Q3BSP_TraceLine(model, frameblend, skeleton, trace, shiftstart, shiftend, hitsupercontentsmask);
+		return;
+	}
+
+	// box trace, performed as brush trace
+	memset(trace, 0, sizeof(*trace));
+	trace->fraction = 1;
+	trace->realfraction = 1;
+	trace->hitsupercontentsmask = hitsupercontentsmask;
+	segmentmins[0] = min(start[0], end[0]) + boxmins[0] - 1;
+	segmentmins[1] = min(start[1], end[1]) + boxmins[1] - 1;
+	segmentmins[2] = min(start[2], end[2]) + boxmins[2] - 1;
+	segmentmaxs[0] = max(start[0], end[0]) + boxmaxs[0] + 1;
+	segmentmaxs[1] = max(start[1], end[1]) + boxmaxs[1] + 1;
+	segmentmaxs[2] = max(start[2], end[2]) + boxmaxs[2] + 1;
+	VectorAdd(start, boxmins, boxstartmins);
+	VectorAdd(start, boxmaxs, boxstartmaxs);
+	VectorAdd(end, boxmins, boxendmins);
+	VectorAdd(end, boxmaxs, boxendmaxs);
+	Collision_BrushForBox(&thisbrush_start, boxstartmins, boxstartmaxs, 0, 0, NULL);
+	Collision_BrushForBox(&thisbrush_end, boxendmins, boxendmaxs, 0, 0, NULL);
+	if (mod_collision_bih.integer)
+		Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, &thisbrush_start.brush, &thisbrush_end.brush, segmentmins, segmentmaxs);
+	else if (model->brush.submodel)
 	{
 		for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
-			if (brush->colbrushf)
-				Collision_TraceLineBrushFloat(trace, start, end, brush->colbrushf, brush->colbrushf);
+			if (brush->colbrushf && BoxesOverlap(segmentmins, segmentmaxs, brush->colbrushf->mins, brush->colbrushf->maxs))
+				Collision_TraceBrushBrushFloat(trace, &thisbrush_start.brush, &thisbrush_end.brush, brush->colbrushf, brush->colbrushf);
 		if (mod_q3bsp_curves_collisions.integer)
 			for (i = 0, surface = model->data_surfaces + model->firstmodelsurface;i < model->nummodelsurfaces;i++, surface++)
-				if (surface->num_collisiontriangles)
-					Collision_TraceLineTriangleMeshFloat(trace, start, end, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->num_collisionbboxstride, surface->data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
+				if (surface->num_collisiontriangles && BoxesOverlap(segmentmins, segmentmaxs, surface->mins, surface->maxs))
+					Collision_TraceBrushTriangleMeshFloat(trace, &thisbrush_start.brush, &thisbrush_end.brush, surface->num_collisiontriangles, surface->deprecatedq3data_collisionelement3i, surface->deprecatedq3data_collisionvertex3f, surface->deprecatedq3num_collisionbboxstride, surface->deprecatedq3data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
 	}
 	else
-		Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, model->brush.data_nodes, start, end, 0, 1, start, end, ++markframe, segmentmins, segmentmaxs);
+		Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model, model->brush.data_nodes, &thisbrush_start.brush, &thisbrush_end.brush, ++markframe, segmentmins, segmentmaxs);
 }
 
-static void Mod_Q3BSP_TraceBox(dp_model_t *model, int frame, trace_t *trace, const vec3_t start, const vec3_t boxmins, const vec3_t boxmaxs, const vec3_t end, int hitsupercontentsmask)
+void Mod_Q3BSP_TraceBrush(dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, trace_t *trace, colbrushf_t *start, colbrushf_t *end, int hitsupercontentsmask)
 {
-	int i;
 	float segmentmins[3], segmentmaxs[3];
+	int i;
 	msurface_t *surface;
 	q3mbrush_t *brush;
-	colbrushf_t *thisbrush_start, *thisbrush_end;
-	vec3_t boxstartmins, boxstartmaxs, boxendmins, boxendmaxs;
 
-	if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(boxmins, boxmaxs))
+	if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(start->mins, start->maxs) && VectorCompare(end->mins, end->maxs))
 	{
-		vec3_t shiftstart, shiftend;
-		VectorAdd(start, boxmins, shiftstart);
-		VectorAdd(end, boxmins, shiftend);
-		if (VectorCompare(start, end))
-			Mod_Q3BSP_TracePoint(model, frame, trace, shiftstart, hitsupercontentsmask);
+		if (VectorCompare(start->mins, end->mins))
+			Mod_Q3BSP_TracePoint(model, frameblend, skeleton, trace, start->mins, hitsupercontentsmask);
 		else
-		{
-			Mod_Q3BSP_TraceLine(model, frame, trace, shiftstart, shiftend, hitsupercontentsmask);
-			VectorSubtract(trace->endpos, boxmins, trace->endpos);
-		}
+			Mod_Q3BSP_TraceLine(model, frameblend, skeleton, trace, start->mins, end->mins, hitsupercontentsmask);
 		return;
 	}
 
@@ -5899,30 +6658,26 @@ static void Mod_Q3BSP_TraceBox(dp_model_t *model, int frame, trace_t *trace, con
 	trace->fraction = 1;
 	trace->realfraction = 1;
 	trace->hitsupercontentsmask = hitsupercontentsmask;
-	segmentmins[0] = min(start[0], end[0]) + boxmins[0] - 1;
-	segmentmins[1] = min(start[1], end[1]) + boxmins[1] - 1;
-	segmentmins[2] = min(start[2], end[2]) + boxmins[2] - 1;
-	segmentmaxs[0] = max(start[0], end[0]) + boxmaxs[0] + 1;
-	segmentmaxs[1] = max(start[1], end[1]) + boxmaxs[1] + 1;
-	segmentmaxs[2] = max(start[2], end[2]) + boxmaxs[2] + 1;
-	VectorAdd(start, boxmins, boxstartmins);
-	VectorAdd(start, boxmaxs, boxstartmaxs);
-	VectorAdd(end, boxmins, boxendmins);
-	VectorAdd(end, boxmaxs, boxendmaxs);
-	thisbrush_start = Collision_BrushForBox(&identitymatrix, boxstartmins, boxstartmaxs, 0, 0, NULL);
-	thisbrush_end = Collision_BrushForBox(&identitymatrix, boxendmins, boxendmaxs, 0, 0, NULL);
-	if (model->brush.submodel)
+	segmentmins[0] = min(start->mins[0], end->mins[0]);
+	segmentmins[1] = min(start->mins[1], end->mins[1]);
+	segmentmins[2] = min(start->mins[2], end->mins[2]);
+	segmentmaxs[0] = max(start->maxs[0], end->maxs[0]);
+	segmentmaxs[1] = max(start->maxs[1], end->maxs[1]);
+	segmentmaxs[2] = max(start->maxs[2], end->maxs[2]);
+	if (mod_collision_bih.integer)
+		Mod_CollisionBIH_TraceBrush_RecursiveBIHNode(trace, model, model->collision_bih.rootnode, start, end, segmentmins, segmentmaxs);
+	else if (model->brush.submodel)
 	{
 		for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
-			if (brush->colbrushf)
-				Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, brush->colbrushf, brush->colbrushf);
+			if (brush->colbrushf && BoxesOverlap(segmentmins, segmentmaxs, brush->colbrushf->mins, brush->colbrushf->maxs))
+				Collision_TraceBrushBrushFloat(trace, start, end, brush->colbrushf, brush->colbrushf);
 		if (mod_q3bsp_curves_collisions.integer)
 			for (i = 0, surface = model->data_surfaces + model->firstmodelsurface;i < model->nummodelsurfaces;i++, surface++)
-				if (surface->num_collisiontriangles)
-					Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->num_collisionbboxstride, surface->data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
+				if (surface->num_collisiontriangles && BoxesOverlap(segmentmins, segmentmaxs, surface->mins, surface->maxs))
+					Collision_TraceBrushTriangleMeshFloat(trace, start, end, surface->num_collisiontriangles, surface->deprecatedq3data_collisionelement3i, surface->deprecatedq3data_collisionvertex3f, surface->deprecatedq3num_collisionbboxstride, surface->deprecatedq3data_collisionbbox6f, surface->texture->supercontents, surface->texture->surfaceflags, surface->texture, segmentmins, segmentmaxs);
 	}
 	else
-		Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model, model->brush.data_nodes, thisbrush_start, thisbrush_end, ++markframe, segmentmins, segmentmaxs);
+		Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model, model->brush.data_nodes, start, end, ++markframe, segmentmins, segmentmaxs);
 }
 
 static int Mod_Q3BSP_PointSuperContents(struct model_s *model, int frame, const vec3_t point)
@@ -5930,8 +6685,14 @@ static int Mod_Q3BSP_PointSuperContents(struct model_s *model, int frame, const
 	int i;
 	int supercontents = 0;
 	q3mbrush_t *brush;
+	if (mod_collision_bih.integer)
+	{
+		trace_t trace;
+		Mod_Q3BSP_TracePoint(model, NULL, NULL, &trace, point, 0);
+		supercontents = trace.startsupercontents;
+	}
 	// test if the point is inside each brush
-	if (model->brush.submodel)
+	else if (model->brush.submodel)
 	{
 		// submodels are effectively one leaf
 		for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
@@ -5957,6 +6718,141 @@ static int Mod_Q3BSP_PointSuperContents(struct model_s *model, int frame, const
 	return supercontents;
 }
 
+bih_t *Mod_MakeCollisionBIH(dp_model_t *model, qboolean userendersurfaces, bih_t *out)
+{
+	int j;
+	int bihnumleafs;
+	int bihmaxnodes;
+	int brushindex;
+	int triangleindex;
+	int bihleafindex;
+	int nummodelbrushes = model->nummodelbrushes;
+	int nummodelsurfaces = model->nummodelsurfaces;
+	const int *e;
+	const int *collisionelement3i;
+	const float *collisionvertex3f;
+	const int *renderelement3i;
+	const float *rendervertex3f;
+	bih_leaf_t *bihleafs;
+	bih_node_t *bihnodes;
+	int *temp_leafsort;
+	int *temp_leafsortscratch;
+	const msurface_t *surface;
+	const q3mbrush_t *brush;
+
+	// find out how many BIH leaf nodes we need
+	bihnumleafs = 0;
+	if (userendersurfaces)
+	{
+		for (j = 0, surface = model->data_surfaces + model->firstmodelsurface;j < nummodelsurfaces;j++, surface++)
+			bihnumleafs += surface->num_triangles;
+	}
+	else
+	{
+		for (brushindex = 0, brush = model->brush.data_brushes + brushindex+model->firstmodelbrush;brushindex < nummodelbrushes;brushindex++, brush++)
+			if (brush->colbrushf)
+				bihnumleafs++;
+		for (j = 0, surface = model->data_surfaces + model->firstmodelsurface;j < nummodelsurfaces;j++, surface++)
+		{
+			if (surface->texture->basematerialflags & MATERIALFLAG_MESHCOLLISIONS)
+				bihnumleafs += surface->num_triangles + surface->num_collisiontriangles;
+			else
+				bihnumleafs += surface->num_collisiontriangles;
+		}
+	}
+
+	if (!bihnumleafs)
+		return NULL;
+
+	// allocate the memory for the BIH leaf nodes
+	bihleafs = (bih_leaf_t *)Mem_Alloc(loadmodel->mempool, sizeof(bih_leaf_t) * bihnumleafs);
+
+	// now populate the BIH leaf nodes
+	bihleafindex = 0;
+
+	// add render surfaces
+	renderelement3i = model->surfmesh.data_element3i;
+	rendervertex3f = model->surfmesh.data_vertex3f;
+	for (j = 0, surface = model->data_surfaces + model->firstmodelsurface;j < nummodelsurfaces;j++, surface++)
+	{
+		for (triangleindex = 0, e = renderelement3i + 3*surface->num_firsttriangle;triangleindex < surface->num_triangles;triangleindex++, e += 3)
+		{
+			if (!userendersurfaces && !(surface->texture->basematerialflags & MATERIALFLAG_MESHCOLLISIONS))
+				continue;
+			bihleafs[bihleafindex].type = BIH_RENDERTRIANGLE;
+			bihleafs[bihleafindex].textureindex = surface->texture - model->data_textures;
+			bihleafs[bihleafindex].surfaceindex = surface - model->data_surfaces;
+			bihleafs[bihleafindex].itemindex = triangleindex+surface->num_firsttriangle;
+			bihleafs[bihleafindex].mins[0] = min(rendervertex3f[3*e[0]+0], min(rendervertex3f[3*e[1]+0], rendervertex3f[3*e[2]+0])) - 1;
+			bihleafs[bihleafindex].mins[1] = min(rendervertex3f[3*e[0]+1], min(rendervertex3f[3*e[1]+1], rendervertex3f[3*e[2]+1])) - 1;
+			bihleafs[bihleafindex].mins[2] = min(rendervertex3f[3*e[0]+2], min(rendervertex3f[3*e[1]+2], rendervertex3f[3*e[2]+2])) - 1;
+			bihleafs[bihleafindex].maxs[0] = max(rendervertex3f[3*e[0]+0], max(rendervertex3f[3*e[1]+0], rendervertex3f[3*e[2]+0])) + 1;
+			bihleafs[bihleafindex].maxs[1] = max(rendervertex3f[3*e[0]+1], max(rendervertex3f[3*e[1]+1], rendervertex3f[3*e[2]+1])) + 1;
+			bihleafs[bihleafindex].maxs[2] = max(rendervertex3f[3*e[0]+2], max(rendervertex3f[3*e[1]+2], rendervertex3f[3*e[2]+2])) + 1;
+			bihleafindex++;
+		}
+	}
+
+	if (!userendersurfaces)
+	{
+		// add collision brushes
+		for (brushindex = 0, brush = model->brush.data_brushes + brushindex+model->firstmodelbrush;brushindex < nummodelbrushes;brushindex++, brush++)
+		{
+			if (!brush->colbrushf)
+				continue;
+			bihleafs[bihleafindex].type = BIH_BRUSH;
+			bihleafs[bihleafindex].textureindex = brush->texture - model->data_textures;
+			bihleafs[bihleafindex].surfaceindex = -1;
+			bihleafs[bihleafindex].itemindex = brushindex+model->firstmodelbrush;
+			VectorCopy(brush->colbrushf->mins, bihleafs[bihleafindex].mins);
+			VectorCopy(brush->colbrushf->maxs, bihleafs[bihleafindex].maxs);
+			bihleafindex++;
+		}
+
+		// add collision surfaces
+		collisionelement3i = model->brush.data_collisionelement3i;
+		collisionvertex3f = model->brush.data_collisionvertex3f;
+		for (j = 0, surface = model->data_surfaces + model->firstmodelsurface;j < nummodelsurfaces;j++, surface++)
+		{
+			for (triangleindex = 0, e = collisionelement3i + 3*surface->num_firstcollisiontriangle;triangleindex < surface->num_collisiontriangles;triangleindex++, e += 3)
+			{
+				bihleafs[bihleafindex].type = BIH_COLLISIONTRIANGLE;
+				bihleafs[bihleafindex].textureindex = surface->texture - model->data_textures;
+				bihleafs[bihleafindex].surfaceindex = surface - model->data_surfaces;
+				bihleafs[bihleafindex].itemindex = triangleindex+surface->num_firstcollisiontriangle;
+				bihleafs[bihleafindex].mins[0] = min(collisionvertex3f[3*e[0]+0], min(collisionvertex3f[3*e[1]+0], collisionvertex3f[3*e[2]+0])) - 1;
+				bihleafs[bihleafindex].mins[1] = min(collisionvertex3f[3*e[0]+1], min(collisionvertex3f[3*e[1]+1], collisionvertex3f[3*e[2]+1])) - 1;
+				bihleafs[bihleafindex].mins[2] = min(collisionvertex3f[3*e[0]+2], min(collisionvertex3f[3*e[1]+2], collisionvertex3f[3*e[2]+2])) - 1;
+				bihleafs[bihleafindex].maxs[0] = max(collisionvertex3f[3*e[0]+0], max(collisionvertex3f[3*e[1]+0], collisionvertex3f[3*e[2]+0])) + 1;
+				bihleafs[bihleafindex].maxs[1] = max(collisionvertex3f[3*e[0]+1], max(collisionvertex3f[3*e[1]+1], collisionvertex3f[3*e[2]+1])) + 1;
+				bihleafs[bihleafindex].maxs[2] = max(collisionvertex3f[3*e[0]+2], max(collisionvertex3f[3*e[1]+2], collisionvertex3f[3*e[2]+2])) + 1;
+				bihleafindex++;
+			}
+		}
+	}
+
+	// allocate buffers for the produced and temporary data
+	bihmaxnodes = bihnumleafs - 1;
+	bihnodes = (bih_node_t *)Mem_Alloc(loadmodel->mempool, sizeof(bih_node_t) * bihmaxnodes);
+	temp_leafsort = (int *)Mem_Alloc(loadmodel->mempool, sizeof(int) * bihnumleafs * 2);
+	temp_leafsortscratch = temp_leafsort + bihnumleafs;
+
+	// now build it
+	BIH_Build(out, bihnumleafs, bihleafs, bihmaxnodes, bihnodes, temp_leafsort, temp_leafsortscratch);
+
+	// we're done with the temporary data
+	Mem_Free(temp_leafsort);
+
+	// resize the BIH nodes array if it over-allocated
+	if (out->maxnodes > out->numnodes)
+	{
+		out->maxnodes = out->numnodes;
+		out->nodes = (bih_node_t *)Mem_Realloc(loadmodel->mempool, out->nodes, out->numnodes * sizeof(bih_node_t));
+	}
+
+	return out;
+}
+
 static int Mod_Q3BSP_SuperContentsFromNativeContents(dp_model_t *model, int nativecontents)
 {
 	int supercontents = 0;
@@ -6032,10 +6928,9 @@ void Mod_Q3BSP_RecursiveFindNumLeafs(mnode_t *node)
 
 void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 {
-	int i, j, numshadowmeshtriangles, lumps;
+	int i, j, lumps;
 	q3dheader_t *header;
 	float corner[3], yawradius, modelradius;
-	msurface_t *surface;
 
 	mod->modeldatatypestring = "Q3BSP";
 
@@ -6053,10 +6948,11 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 
 	mod->soundfromcenter = true;
 	mod->TraceBox = Mod_Q3BSP_TraceBox;
+	mod->TraceBrush = Mod_Q3BSP_TraceBrush;
 	mod->TraceLine = Mod_Q3BSP_TraceLine;
 	mod->TracePoint = Mod_Q3BSP_TracePoint;
 	mod->PointSuperContents = Mod_Q3BSP_PointSuperContents;
-	mod->brush.TraceLineOfSight = Mod_Q1BSP_TraceLineOfSight;
+	mod->brush.TraceLineOfSight = Mod_Q3BSP_TraceLineOfSight;
 	mod->brush.SuperContentsFromNativeContents = Mod_Q3BSP_SuperContentsFromNativeContents;
 	mod->brush.NativeContentsFromSuperContents = Mod_Q3BSP_NativeContentsFromSuperContents;
 	mod->brush.GetPVS = Mod_Q1BSP_GetPVS;
@@ -6073,6 +6969,7 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 	mod->Draw = R_Q1BSP_Draw;
 	mod->DrawDepth = R_Q1BSP_DrawDepth;
 	mod->DrawDebug = R_Q1BSP_DrawDebug;
+	mod->DrawPrepass = R_Q1BSP_DrawPrepass;
 	mod->GetLightInfo = R_Q1BSP_GetLightInfo;
 	mod->CompileShadowMap = R_Q1BSP_CompileShadowMap;
 	mod->DrawShadowMap = R_Q1BSP_DrawShadowMap;
@@ -6145,31 +7042,625 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 	Mod_Q3BSP_LoadPVS(&header->lumps[Q3LUMP_PVS]);
 	loadmodel->brush.numsubmodels = loadmodel->brushq3.num_models;
 
-	// the MakePortals code works fine on the q3bsp data as well
-	Mod_Q1BSP_MakePortals();
+	// the MakePortals code works fine on the q3bsp data as well
+	if (mod_bsp_portalize.integer)
+		Mod_Q1BSP_MakePortals();
+
+	// FIXME: shader alpha should replace r_wateralpha support in q3bsp
+	loadmodel->brush.supportwateralpha = true;
+
+	// make a single combined shadow mesh to allow optimized shadow volume creation
+	Mod_Q1BSP_CreateShadowMesh(loadmodel);
+
+	loadmodel->brush.num_leafs = 0;
+	Mod_Q3BSP_RecursiveFindNumLeafs(loadmodel->brush.data_nodes);
+
+	if (loadmodel->brush.numsubmodels)
+		loadmodel->brush.submodels = (dp_model_t **)Mem_Alloc(loadmodel->mempool, loadmodel->brush.numsubmodels * sizeof(dp_model_t *));
+
+	mod = loadmodel;
+	for (i = 0;i < loadmodel->brush.numsubmodels;i++)
+	{
+		if (i > 0)
+		{
+			char name[10];
+			// duplicate the basic information
+			dpsnprintf(name, sizeof(name), "*%i", i);
+			mod = Mod_FindName(name, loadmodel->name);
+			// copy the base model to this one
+			*mod = *loadmodel;
+			// rename the clone back to its proper name
+			strlcpy(mod->name, name, sizeof(mod->name));
+			mod->brush.parentmodel = loadmodel;
+			// textures and memory belong to the main model
+			mod->texturepool = NULL;
+			mod->mempool = NULL;
+			mod->brush.GetPVS = NULL;
+			mod->brush.FatPVS = NULL;
+			mod->brush.BoxTouchingPVS = NULL;
+			mod->brush.BoxTouchingLeafPVS = NULL;
+			mod->brush.BoxTouchingVisibleLeafs = NULL;
+			mod->brush.FindBoxClusters = NULL;
+			mod->brush.LightPoint = NULL;
+			mod->brush.AmbientSoundLevelsForPoint = NULL;
+		}
+		mod->brush.submodel = i;
+		if (loadmodel->brush.submodels)
+			loadmodel->brush.submodels[i] = mod;
+
+		// make the model surface list (used by shadowing/lighting)
+		mod->firstmodelsurface = mod->brushq3.data_models[i].firstface;
+		mod->nummodelsurfaces = mod->brushq3.data_models[i].numfaces;
+		mod->firstmodelbrush = mod->brushq3.data_models[i].firstbrush;
+		mod->nummodelbrushes = mod->brushq3.data_models[i].numbrushes;
+		mod->sortedmodelsurfaces = (int *)Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->sortedmodelsurfaces));
+		Mod_MakeSortedSurfaces(mod);
+
+		VectorCopy(mod->brushq3.data_models[i].mins, mod->normalmins);
+		VectorCopy(mod->brushq3.data_models[i].maxs, mod->normalmaxs);
+		// enlarge the bounding box to enclose all geometry of this model,
+		// because q3map2 sometimes lies (mostly to affect the lightgrid),
+		// which can in turn mess up the farclip (as well as culling when
+		// outside the level - an unimportant concern)
+
+		//printf("Editing model %d... BEFORE re-bounding: %f %f %f - %f %f %f\n", i, mod->normalmins[0], mod->normalmins[1], mod->normalmins[2], mod->normalmaxs[0], mod->normalmaxs[1], mod->normalmaxs[2]);
+		for (j = 0;j < mod->nummodelsurfaces;j++)
+		{
+			const msurface_t *surface = mod->data_surfaces + j + mod->firstmodelsurface;
+			const float *v = mod->surfmesh.data_vertex3f + 3 * surface->num_firstvertex;
+			int k;
+			if (!surface->num_vertices)
+				continue;
+			for (k = 0;k < surface->num_vertices;k++, v += 3)
+			{
+				mod->normalmins[0] = min(mod->normalmins[0], v[0]);
+				mod->normalmins[1] = min(mod->normalmins[1], v[1]);
+				mod->normalmins[2] = min(mod->normalmins[2], v[2]);
+				mod->normalmaxs[0] = max(mod->normalmaxs[0], v[0]);
+				mod->normalmaxs[1] = max(mod->normalmaxs[1], v[1]);
+				mod->normalmaxs[2] = max(mod->normalmaxs[2], v[2]);
+			}
+		}
+		//printf("Editing model %d... AFTER re-bounding: %f %f %f - %f %f %f\n", i, mod->normalmins[0], mod->normalmins[1], mod->normalmins[2], mod->normalmaxs[0], mod->normalmaxs[1], mod->normalmaxs[2]);
+		corner[0] = max(fabs(mod->normalmins[0]), fabs(mod->normalmaxs[0]));
+		corner[1] = max(fabs(mod->normalmins[1]), fabs(mod->normalmaxs[1]));
+		corner[2] = max(fabs(mod->normalmins[2]), fabs(mod->normalmaxs[2]));
+		modelradius = sqrt(corner[0]*corner[0]+corner[1]*corner[1]+corner[2]*corner[2]);
+		yawradius = sqrt(corner[0]*corner[0]+corner[1]*corner[1]);
+		mod->rotatedmins[0] = mod->rotatedmins[1] = mod->rotatedmins[2] = -modelradius;
+		mod->rotatedmaxs[0] = mod->rotatedmaxs[1] = mod->rotatedmaxs[2] = modelradius;
+		mod->yawmaxs[0] = mod->yawmaxs[1] = yawradius;
+		mod->yawmins[0] = mod->yawmins[1] = -yawradius;
+		mod->yawmins[2] = mod->normalmins[2];
+		mod->yawmaxs[2] = mod->normalmaxs[2];
+		mod->radius = modelradius;
+		mod->radius2 = modelradius * modelradius;
+
+		// this gets altered below if sky or water is used
+		mod->DrawSky = NULL;
+		mod->DrawAddWaterPlanes = NULL;
+
+		for (j = 0;j < mod->nummodelsurfaces;j++)
+			if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & MATERIALFLAG_SKY)
+				break;
+		if (j < mod->nummodelsurfaces)
+			mod->DrawSky = R_Q1BSP_DrawSky;
+
+		for (j = 0;j < mod->nummodelsurfaces;j++)
+			if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION | MATERIALFLAG_CAMERA))
+				break;
+		if (j < mod->nummodelsurfaces)
+			mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
+
+		Mod_MakeCollisionBIH(mod, false, &mod->collision_bih);
+		Mod_MakeCollisionBIH(mod, true, &mod->render_bih);
+
+		// generate VBOs and other shared data before cloning submodels
+		if (i == 0)
+			Mod_BuildVBOs();
+	}
+
+	Con_DPrintf("Stats for q3bsp model \"%s\": %i faces, %i nodes, %i leafs, %i clusters, %i clusterportals, mesh: %i vertices, %i triangles, %i surfaces\n", loadmodel->name, loadmodel->num_surfaces, loadmodel->brush.num_nodes, loadmodel->brush.num_leafs, mod->brush.num_pvsclusters, loadmodel->brush.num_portals, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->num_surfaces);
+}
+
+void Mod_IBSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
+{
+	int i = LittleLong(((int *)buffer)[1]);
+	if (i == Q3BSPVERSION || i == Q3BSPVERSION_IG || i == Q3BSPVERSION_LIVE)
+		Mod_Q3BSP_Load(mod,buffer, bufferend);
+	else if (i == Q2BSPVERSION)
+		Mod_Q2BSP_Load(mod,buffer, bufferend);
+	else
+		Host_Error("Mod_IBSP_Load: unknown/unsupported version %i", i);
+}
+
+void Mod_MAP_Load(dp_model_t *mod, void *buffer, void *bufferend)
+{
+	Host_Error("Mod_MAP_Load: not yet implemented");
+}
+
+#define OBJASMODEL
+
+#ifdef OBJASMODEL
+typedef struct objvertex_s
+{
+	int nextindex;
+	int submodelindex;
+	int textureindex;
+	float v[3];
+	float vt[2];
+	float vn[3];
+}
+objvertex_t;
+
+static unsigned char nobsp_pvs[1] = {1};
+
+void Mod_OBJ_Load(dp_model_t *mod, void *buffer, void *bufferend)
+{
+	const char *textbase = (char *)buffer, *text = textbase;
+	char *s;
+	char *argv[512];
+	char line[1024];
+	char materialname[MAX_QPATH];
+	int i, j, l, numvertices, firstvertex, firsttriangle, elementindex, vertexindex, surfacevertices, surfacetriangles, surfaceelements, submodelindex = 0;
+	int index1, index2, index3;
+	objvertex_t vfirst, vprev, vcurrent;
+	int argc;
+	int linelen;
+	int numtriangles = 0;
+	int maxtriangles = 0;
+	objvertex_t *vertices = NULL;
+	int linenumber = 0;
+	int maxtextures = 0, numtextures = 0, textureindex = 0;
+	int maxv = 0, numv = 1;
+	int maxvt = 0, numvt = 1;
+	int maxvn = 0, numvn = 1;
+	char *texturenames = NULL;
+	float dist, modelradius, modelyawradius, yawradius;
+	float *v = NULL;
+	float *vt = NULL;
+	float *vn = NULL;
+	float mins[3];
+	float maxs[3];
+	float corner[3];
+	objvertex_t *thisvertex = NULL;
+	int vertexhashindex;
+	int *vertexhashtable = NULL;
+	objvertex_t *vertexhashdata = NULL;
+	objvertex_t *vdata = NULL;
+	int vertexhashsize = 0;
+	int vertexhashcount = 0;
+	skinfile_t *skinfiles = NULL;
+	unsigned char *data = NULL;
+	int *submodelfirstsurface;
+	msurface_t *surface;
+	msurface_t *tempsurfaces;
+
+	memset(&vfirst, 0, sizeof(vfirst));
+	memset(&vprev, 0, sizeof(vprev));
+	memset(&vcurrent, 0, sizeof(vcurrent));
+
+	dpsnprintf(materialname, sizeof(materialname), "%s", loadmodel->name);
+
+	loadmodel->modeldatatypestring = "OBJ";
+
+	loadmodel->type = mod_obj;
+	loadmodel->soundfromcenter = true;
+	loadmodel->TraceBox = Mod_CollisionBIH_TraceBox;
+	loadmodel->TraceBrush = Mod_CollisionBIH_TraceBrush;
+	loadmodel->TraceLine = Mod_CollisionBIH_TraceLine;
+	loadmodel->TracePoint = Mod_CollisionBIH_TracePoint_Mesh;
+	loadmodel->PointSuperContents = Mod_CollisionBIH_PointSuperContents_Mesh;
+	loadmodel->brush.TraceLineOfSight = NULL;
+	loadmodel->brush.SuperContentsFromNativeContents = NULL;
+	loadmodel->brush.NativeContentsFromSuperContents = NULL;
+	loadmodel->brush.GetPVS = NULL;
+	loadmodel->brush.FatPVS = NULL;
+	loadmodel->brush.BoxTouchingPVS = NULL;
+	loadmodel->brush.BoxTouchingLeafPVS = NULL;
+	loadmodel->brush.BoxTouchingVisibleLeafs = NULL;
+	loadmodel->brush.FindBoxClusters = NULL;
+	loadmodel->brush.LightPoint = NULL;
+	loadmodel->brush.FindNonSolidLocation = NULL;
+	loadmodel->brush.AmbientSoundLevelsForPoint = NULL;
+	loadmodel->brush.RoundUpToHullSize = NULL;
+	loadmodel->brush.PointInLeaf = NULL;
+	loadmodel->Draw = R_Q1BSP_Draw;
+	loadmodel->DrawDepth = R_Q1BSP_DrawDepth;
+	loadmodel->DrawDebug = R_Q1BSP_DrawDebug;
+	loadmodel->DrawPrepass = R_Q1BSP_DrawPrepass;
+	loadmodel->GetLightInfo = R_Q1BSP_GetLightInfo;
+	loadmodel->CompileShadowMap = R_Q1BSP_CompileShadowMap;
+	loadmodel->DrawShadowMap = R_Q1BSP_DrawShadowMap;
+	loadmodel->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
+	loadmodel->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
+	loadmodel->DrawLight = R_Q1BSP_DrawLight;
+
+	skinfiles = Mod_LoadSkinFiles();
+	if (loadmodel->numskins < 1)
+		loadmodel->numskins = 1;
+
+	// make skinscenes for the skins (no groups)
+	loadmodel->skinscenes = (animscene_t *)Mem_Alloc(loadmodel->mempool, sizeof(animscene_t) * loadmodel->numskins);
+	for (i = 0;i < loadmodel->numskins;i++)
+	{
+		loadmodel->skinscenes[i].firstframe = i;
+		loadmodel->skinscenes[i].framecount = 1;
+		loadmodel->skinscenes[i].loop = true;
+		loadmodel->skinscenes[i].framerate = 10;
+	}
+
+	VectorClear(mins);
+	VectorClear(maxs);
+
+	// parse the OBJ text now
+	for(;;)
+	{
+		static char emptyarg[1] = "";
+		if (!*text)
+			break;
+		linenumber++;
+		linelen = 0;
+		for (linelen = 0;text[linelen] && text[linelen] != '\r' && text[linelen] != '\n';linelen++)
+			line[linelen] = text[linelen];
+		line[linelen] = 0;
+		for (argc = 0;argc < 4;argc++)
+			argv[argc] = emptyarg;
+		argc = 0;
+		s = line;
+		while (*s == ' ' || *s == '\t')
+			s++;
+		while (*s)
+		{
+			argv[argc++] = s;
+			while (*s > ' ')
+				s++;
+			if (!*s)
+				break;
+			*s++ = 0;
+			while (*s == ' ' || *s == '\t')
+				s++;
+		}
+		text += linelen;
+		if (*text == '\r')
+			text++;
+		if (*text == '\n')
+			text++;
+		if (!argc)
+			continue;
+		if (argv[0][0] == '#')
+			continue;
+		if (!strcmp(argv[0], "v"))
+		{
+			if (maxv <= numv)
+			{
+				maxv = max(maxv * 2, 1024);
+				v = (float *)Mem_Realloc(tempmempool, v, maxv * sizeof(float[3]));
+			}
+			v[numv*3+0] = atof(argv[1]);
+			v[numv*3+2] = atof(argv[2]);
+			v[numv*3+1] = atof(argv[3]);
+			numv++;
+		}
+		else if (!strcmp(argv[0], "vt"))
+		{
+			if (maxvt <= numvt)
+			{
+				maxvt = max(maxvt * 2, 1024);
+				vt = (float *)Mem_Realloc(tempmempool, vt, maxvt * sizeof(float[2]));
+			}
+			vt[numvt*2+0] = atof(argv[1]);
+			vt[numvt*2+1] = 1-atof(argv[2]);
+			numvt++;
+		}
+		else if (!strcmp(argv[0], "vn"))
+		{
+			if (maxvn <= numvn)
+			{
+				maxvn = max(maxvn * 2, 1024);
+				vn = (float *)Mem_Realloc(tempmempool, vn, maxvn * sizeof(float[3]));
+			}
+			vn[numvn*3+0] = atof(argv[1]);
+			vn[numvn*3+2] = atof(argv[2]);
+			vn[numvn*3+1] = atof(argv[3]);
+			numvn++;
+		}
+		else if (!strcmp(argv[0], "f"))
+		{
+			if (!numtextures)
+			{
+				if (maxtextures <= numtextures)
+				{
+					maxtextures = max(maxtextures * 2, 256);
+					texturenames = (char *)Mem_Realloc(loadmodel->mempool, texturenames, maxtextures * MAX_QPATH);
+				}
+				textureindex = numtextures++;
+				strlcpy(texturenames + textureindex*MAX_QPATH, loadmodel->name, MAX_QPATH);
+			}
+			for (j = 1;j < argc;j++)
+			{
+				index1 = atoi(argv[j]);
+				while(argv[j][0] && argv[j][0] != '/')
+					argv[j]++;
+				if (argv[j][0])
+					argv[j]++;
+				index2 = atoi(argv[j]);
+				while(argv[j][0] && argv[j][0] != '/')
+					argv[j]++;
+				if (argv[j][0])
+					argv[j]++;
+				index3 = atoi(argv[j]);
+				// negative refers to a recent vertex
+				// zero means not specified
+				// positive means an absolute vertex index
+				if (index1 < 0)
+					index1 = numv - index1;
+				if (index2 < 0)
+					index2 = numvt - index2;
+				if (index3 < 0)
+					index3 = numvn - index3;
+				vcurrent.nextindex = -1;
+				vcurrent.textureindex = textureindex;
+				vcurrent.submodelindex = submodelindex;
+				if (v && index1 >= 0 && index1 < numv)
+					VectorCopy(v + 3*index1, vcurrent.v);
+				if (vt && index2 >= 0 && index2 < numvt)
+					Vector2Copy(vt + 2*index2, vcurrent.vt);
+				if (vn && index3 >= 0 && index3 < numvn)
+					VectorCopy(vn + 3*index3, vcurrent.vn);
+				if (numtriangles == 0)
+				{
+					VectorCopy(vcurrent.v, mins);
+					VectorCopy(vcurrent.v, maxs);
+				}
+				else
+				{
+					mins[0] = min(mins[0], vcurrent.v[0]);
+					mins[1] = min(mins[1], vcurrent.v[1]);
+					mins[2] = min(mins[2], vcurrent.v[2]);
+					maxs[0] = max(maxs[0], vcurrent.v[0]);
+					maxs[1] = max(maxs[1], vcurrent.v[1]);
+					maxs[2] = max(maxs[2], vcurrent.v[2]);
+				}
+				if (j == 1)
+					vfirst = vcurrent;
+				else if (j >= 3)
+				{
+					if (maxtriangles <= numtriangles)
+					{
+						maxtriangles = max(maxtriangles * 2, 32768);
+						vertices = (objvertex_t*)Mem_Realloc(loadmodel->mempool, vertices, maxtriangles * sizeof(objvertex_t[3]));
+					}
+					vertices[numtriangles*3+0] = vfirst;
+					vertices[numtriangles*3+1] = vprev;
+					vertices[numtriangles*3+2] = vcurrent;
+					numtriangles++;
+				}
+				vprev = vcurrent;
+			}
+		}
+		else if (!strcmp(argv[0], "o") || !strcmp(argv[0], "g"))
+		{
+			submodelindex = atof(argv[1]);
+			loadmodel->brush.numsubmodels = max(submodelindex + 1, loadmodel->brush.numsubmodels);
+		}
+		else if (!strcmp(argv[0], "usemtl"))
+		{
+			for (i = 0;i < numtextures;i++)
+				if (!strcmp(texturenames+i*MAX_QPATH, argv[1]))
+					break;
+			if (i < numtextures)
+				textureindex = i;
+			else
+			{
+				if (maxtextures <= numtextures)
+				{
+					maxtextures = max(maxtextures * 2, 256);
+					texturenames = (char *)Mem_Realloc(loadmodel->mempool, texturenames, maxtextures * MAX_QPATH);
+				}
+				textureindex = numtextures++;
+				strlcpy(texturenames + textureindex*MAX_QPATH, argv[1], MAX_QPATH);
+			}
+		}
+	}
+
+	// now that we have the OBJ data loaded as-is, we can convert it
+
+	// copy the model bounds, then enlarge the yaw and rotated bounds according to radius
+	VectorCopy(mins, loadmodel->normalmins);
+	VectorCopy(maxs, loadmodel->normalmaxs);
+	dist = max(fabs(loadmodel->normalmins[0]), fabs(loadmodel->normalmaxs[0]));
+	modelyawradius = max(fabs(loadmodel->normalmins[1]), fabs(loadmodel->normalmaxs[1]));
+	modelyawradius = dist*dist+modelyawradius*modelyawradius;
+	modelradius = max(fabs(loadmodel->normalmins[2]), fabs(loadmodel->normalmaxs[2]));
+	modelradius = modelyawradius + modelradius * modelradius;
+	modelyawradius = sqrt(modelyawradius);
+	modelradius = sqrt(modelradius);
+	loadmodel->yawmins[0] = loadmodel->yawmins[1] = -modelyawradius;
+	loadmodel->yawmins[2] = loadmodel->normalmins[2];
+	loadmodel->yawmaxs[0] = loadmodel->yawmaxs[1] =  modelyawradius;
+	loadmodel->yawmaxs[2] = loadmodel->normalmaxs[2];
+	loadmodel->rotatedmins[0] = loadmodel->rotatedmins[1] = loadmodel->rotatedmins[2] = -modelradius;
+	loadmodel->rotatedmaxs[0] = loadmodel->rotatedmaxs[1] = loadmodel->rotatedmaxs[2] =  modelradius;
+	loadmodel->radius = modelradius;
+	loadmodel->radius2 = modelradius * modelradius;
+
+	// allocate storage for triangles
+	loadmodel->surfmesh.data_element3i = (int *)Mem_Alloc(loadmodel->mempool, numtriangles * sizeof(int[3]));
+	// allocate vertex hash structures to build an optimal vertex subset
+	vertexhashsize = numtriangles*2;
+	vertexhashtable = (int *)Mem_Alloc(loadmodel->mempool, sizeof(int) * vertexhashsize);
+	memset(vertexhashtable, 0xFF, sizeof(int) * vertexhashsize);
+	vertexhashdata = (objvertex_t *)Mem_Alloc(loadmodel->mempool, sizeof(*vertexhashdata) * numtriangles*3);
+	vertexhashcount = 0;
+
+	// gather surface stats for assigning vertex/triangle ranges
+	firstvertex = 0;
+	firsttriangle = 0;
+	elementindex = 0;
+	loadmodel->num_surfaces = 0;
+	// allocate storage for the worst case number of surfaces, later we resize
+	tempsurfaces = (msurface_t *)Mem_Alloc(loadmodel->mempool, numtextures * loadmodel->brush.numsubmodels * sizeof(msurface_t));
+	submodelfirstsurface = (int *)Mem_Alloc(loadmodel->mempool, (loadmodel->brush.numsubmodels+1) * sizeof(int));
+	surface = tempsurfaces;
+	for (submodelindex = 0;submodelindex < loadmodel->brush.numsubmodels;submodelindex++)
+	{
+		submodelfirstsurface[submodelindex] = loadmodel->num_surfaces;
+		for (textureindex = 0;textureindex < numtextures;textureindex++)
+		{
+			for (vertexindex = 0;vertexindex < numtriangles*3;vertexindex++)
+			{
+				thisvertex = vertices + vertexindex;
+				if (thisvertex->submodelindex == submodelindex && thisvertex->textureindex == textureindex)
+					break;
+			}
+			// skip the surface creation if there are no triangles for it
+			if (vertexindex == numtriangles*3)
+				continue;
+			// create a surface for these vertices
+			surfacevertices = 0;
+			surfaceelements = 0;
+			// we hack in a texture index in the surface to be fixed up later...
+			surface->texture = (texture_t *)((size_t)textureindex);
+			// calculate bounds as we go
+			VectorCopy(thisvertex->v, surface->mins);
+			VectorCopy(thisvertex->v, surface->maxs);
+			for (;vertexindex < numtriangles*3;vertexindex++)
+			{
+				thisvertex = vertices + vertexindex;
+				if (thisvertex->submodelindex != submodelindex)
+					continue;
+				if (thisvertex->textureindex != textureindex)
+					continue;
+				// add vertex to surface bounds
+				surface->mins[0] = min(surface->mins[0], thisvertex->v[0]);
+				surface->mins[1] = min(surface->mins[1], thisvertex->v[1]);
+				surface->mins[2] = min(surface->mins[2], thisvertex->v[2]);
+				surface->maxs[0] = max(surface->maxs[0], thisvertex->v[0]);
+				surface->maxs[1] = max(surface->maxs[1], thisvertex->v[1]);
+				surface->maxs[2] = max(surface->maxs[2], thisvertex->v[2]);
+				// add the vertex if it is not found in the merged set, and
+				// get its index (triangle element) for the surface
+				vertexhashindex = (unsigned int)(thisvertex->v[0] * 3571 + thisvertex->v[0] * 1777 + thisvertex->v[0] * 457) % (unsigned int)vertexhashsize;
+				for (i = vertexhashtable[vertexhashindex];i >= 0;i = vertexhashdata[i].nextindex)
+				{
+					vdata = vertexhashdata + i;
+					if (vdata->submodelindex == thisvertex->submodelindex && vdata->textureindex == thisvertex->textureindex && VectorCompare(thisvertex->v, vdata->v) && VectorCompare(thisvertex->vn, vdata->vn) && Vector2Compare(thisvertex->vt, vdata->vt))
+						break;
+				}
+				if (i < 0)
+				{
+					i = vertexhashcount++;
+					vdata = vertexhashdata + i;
+					*vdata = *thisvertex;
+					vdata->nextindex = vertexhashtable[vertexhashindex];
+					vertexhashtable[vertexhashindex] = i;
+					surfacevertices++;
+				}
+				loadmodel->surfmesh.data_element3i[elementindex++] = i;
+				surfaceelements++;
+			}
+			surfacetriangles = surfaceelements / 3;
+			surface->num_vertices = surfacevertices;
+			surface->num_triangles = surfacetriangles;
+			surface->num_firstvertex = firstvertex;
+			surface->num_firsttriangle = firsttriangle;
+			firstvertex += surface->num_vertices;
+			firsttriangle += surface->num_triangles;
+			surface++;
+			loadmodel->num_surfaces++;
+		}
+	}
+	submodelfirstsurface[submodelindex] = loadmodel->num_surfaces;
+	numvertices = firstvertex;
+	loadmodel->data_surfaces = (msurface_t *)Mem_Realloc(loadmodel->mempool, tempsurfaces, loadmodel->num_surfaces * sizeof(msurface_t));
+	tempsurfaces = NULL;
+
+	// allocate storage for final mesh data
+	loadmodel->num_textures = numtextures * loadmodel->numskins;
+	loadmodel->num_texturesperskin = numtextures;
+	data = (unsigned char *)Mem_Alloc(loadmodel->mempool, loadmodel->num_surfaces * sizeof(int) + loadmodel->num_surfaces * loadmodel->numskins * sizeof(texture_t) + numtriangles * sizeof(int[3]) + (numvertices <= 65536 ? numtriangles * sizeof(unsigned short[3]) : 0) + (r_enableshadowvolumes.integer ? numtriangles * sizeof(int[3]) : 0) + numvertices * sizeof(float[14]) + loadmodel->brush.numsubmodels * sizeof(dp_model_t *));
+	loadmodel->brush.submodels = (dp_model_t **)data;data += loadmodel->brush.numsubmodels * sizeof(dp_model_t *);
+	loadmodel->sortedmodelsurfaces = (int *)data;data += loadmodel->num_surfaces * sizeof(int);
+	loadmodel->data_textures = (texture_t *)data;data += loadmodel->num_surfaces * loadmodel->numskins * sizeof(texture_t);
+	loadmodel->surfmesh.num_vertices = numvertices;
+	loadmodel->surfmesh.num_triangles = numtriangles;
+	if (r_enableshadowvolumes.integer)
+		loadmodel->surfmesh.data_neighbor3i = (int *)data;data += numtriangles * sizeof(int[3]);
+	loadmodel->surfmesh.data_vertex3f = (float *)data;data += numvertices * sizeof(float[3]);
+	loadmodel->surfmesh.data_svector3f = (float *)data;data += numvertices * sizeof(float[3]);
+	loadmodel->surfmesh.data_tvector3f = (float *)data;data += numvertices * sizeof(float[3]);
+	loadmodel->surfmesh.data_normal3f = (float *)data;data += numvertices * sizeof(float[3]);
+	loadmodel->surfmesh.data_texcoordtexture2f = (float *)data;data += numvertices * sizeof(float[2]);
+	if (loadmodel->surfmesh.num_vertices <= 65536)
+		loadmodel->surfmesh.data_element3s = (unsigned short *)data;data += loadmodel->surfmesh.num_triangles * sizeof(unsigned short[3]);
+
+	for (j = 0;j < loadmodel->surfmesh.num_vertices;j++)
+	{
+		VectorCopy(vertexhashdata[j].v, loadmodel->surfmesh.data_vertex3f + 3*j);
+		VectorCopy(vertexhashdata[j].vn, loadmodel->surfmesh.data_normal3f + 3*j);
+		Vector2Copy(vertexhashdata[j].vt, loadmodel->surfmesh.data_texcoordtexture2f + 2*j);
+	}
+
+	// load the textures
+	for (textureindex = 0;textureindex < numtextures;textureindex++)
+		Mod_BuildAliasSkinsFromSkinFiles(loadmodel->data_textures + textureindex, skinfiles, texturenames + textureindex*MAX_QPATH, texturenames + textureindex*MAX_QPATH);
+	Mod_FreeSkinFiles(skinfiles);
+
+	// set the surface textures to their real values now that we loaded them...
+	for (i = 0;i < loadmodel->num_surfaces;i++)
+		loadmodel->data_surfaces[i].texture = loadmodel->data_textures + (size_t)loadmodel->data_surfaces[i].texture;
+
+	// free data
+	Mem_Free(vertices);
+	Mem_Free(texturenames);
+	Mem_Free(v);
+	Mem_Free(vt);
+	Mem_Free(vn);
+	Mem_Free(vertexhashtable);
+	Mem_Free(vertexhashdata);
+
+	// make a single combined shadow mesh to allow optimized shadow volume creation
+	Mod_Q1BSP_CreateShadowMesh(loadmodel);
 
-	// FIXME: shader alpha should replace r_wateralpha support in q3bsp
+	// compute all the mesh information that was not loaded from the file
+	if (loadmodel->surfmesh.data_element3s)
+		for (i = 0;i < loadmodel->surfmesh.num_triangles*3;i++)
+			loadmodel->surfmesh.data_element3s[i] = loadmodel->surfmesh.data_element3i[i];
+	Mod_ValidateElements(loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.num_triangles, 0, loadmodel->surfmesh.num_vertices, __FILE__, __LINE__);
+	// generate normals if the file did not have them
+	if (!VectorLength2(loadmodel->surfmesh.data_normal3f))
+		Mod_BuildNormals(0, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.data_normal3f, r_smoothnormals_areaweighting.integer != 0);
+	Mod_BuildTextureVectorsFromNormals(0, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_texcoordtexture2f, loadmodel->surfmesh.data_normal3f, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.data_svector3f, loadmodel->surfmesh.data_tvector3f, r_smoothnormals_areaweighting.integer != 0);
+	if (loadmodel->surfmesh.data_neighbor3i)
+		Mod_BuildTriangleNeighbors(loadmodel->surfmesh.data_neighbor3i, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.num_triangles);
+
+	// if this is a worldmodel and has no BSP tree, create a fake one for the purpose
+	loadmodel->brush.num_visleafs = 1;
+	loadmodel->brush.num_leafs = 1;
+	loadmodel->brush.num_nodes = 0;
+	loadmodel->brush.num_leafsurfaces = loadmodel->num_surfaces;
+	loadmodel->brush.data_leafs = (mleaf_t *)Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_leafs * sizeof(mleaf_t));
+	loadmodel->brush.data_nodes = (mnode_t *)loadmodel->brush.data_leafs;
+	loadmodel->brush.num_pvsclusters = 1;
+	loadmodel->brush.num_pvsclusterbytes = 1;
+	loadmodel->brush.data_pvsclusters = nobsp_pvs;
+	//if (loadmodel->num_nodes) loadmodel->data_nodes = (mnode_t *)Mem_Alloc(loadmodel->mempool, loadmodel->num_nodes * sizeof(mnode_t));
+	//loadmodel->data_leafsurfaces = (int *)Mem_Alloc(loadmodel->mempool, loadmodel->num_leafsurfaces * sizeof(int));
+	loadmodel->brush.data_leafsurfaces = loadmodel->sortedmodelsurfaces;
+	VectorCopy(loadmodel->normalmins, loadmodel->brush.data_leafs->mins);
+	VectorCopy(loadmodel->normalmaxs, loadmodel->brush.data_leafs->maxs);
+	loadmodel->brush.data_leafs->combinedsupercontents = 0; // FIXME?
+	loadmodel->brush.data_leafs->clusterindex = 0;
+	loadmodel->brush.data_leafs->areaindex = 0;
+	loadmodel->brush.data_leafs->numleafsurfaces = loadmodel->brush.num_leafsurfaces;
+	loadmodel->brush.data_leafs->firstleafsurface = loadmodel->brush.data_leafsurfaces;
+	loadmodel->brush.data_leafs->numleafbrushes = 0;
+	loadmodel->brush.data_leafs->firstleafbrush = NULL;
 	loadmodel->brush.supportwateralpha = true;
 
-	// make a single combined shadow mesh to allow optimized shadow volume creation
-	numshadowmeshtriangles = 0;
-	if (cls.state != ca_dedicated)
-	{
-		for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
-		{
-			surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
-			numshadowmeshtriangles += surface->num_triangles;
-		}
-		loadmodel->brush.shadowmesh = Mod_ShadowMesh_Begin(loadmodel->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
-		for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
-			if (surface->num_triangles > 0)
-				Mod_ShadowMesh_AddMesh(loadmodel->mempool, loadmodel->brush.shadowmesh, NULL, NULL, NULL, loadmodel->surfmesh.data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle));
-		loadmodel->brush.shadowmesh = Mod_ShadowMesh_Finish(loadmodel->mempool, loadmodel->brush.shadowmesh, false, true, false);
-		Mod_BuildTriangleNeighbors(loadmodel->brush.shadowmesh->neighbor3i, loadmodel->brush.shadowmesh->element3i, loadmodel->brush.shadowmesh->numtriangles);
-	}
-
-	loadmodel->brush.num_leafs = 0;
-	Mod_Q3BSP_RecursiveFindNumLeafs(loadmodel->brush.data_nodes);
+	if (loadmodel->brush.numsubmodels)
+		loadmodel->brush.submodels = (dp_model_t **)Mem_Alloc(loadmodel->mempool, loadmodel->brush.numsubmodels * sizeof(dp_model_t *));
 
 	mod = loadmodel;
 	for (i = 0;i < loadmodel->brush.numsubmodels;i++)
@@ -6188,7 +7679,6 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 			// textures and memory belong to the main model
 			mod->texturepool = NULL;
 			mod->mempool = NULL;
-			mod->brush.TraceLineOfSight = NULL;
 			mod->brush.GetPVS = NULL;
 			mod->brush.FatPVS = NULL;
 			mod->brush.BoxTouchingPVS = NULL;
@@ -6199,23 +7689,20 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 			mod->brush.AmbientSoundLevelsForPoint = NULL;
 		}
 		mod->brush.submodel = i;
+		if (loadmodel->brush.submodels)
+			loadmodel->brush.submodels[i] = mod;
 
 		// make the model surface list (used by shadowing/lighting)
-		mod->firstmodelsurface = mod->brushq3.data_models[i].firstface;
-		mod->nummodelsurfaces = mod->brushq3.data_models[i].numfaces;
-		mod->firstmodelbrush = mod->brushq3.data_models[i].firstbrush;
-		mod->nummodelbrushes = mod->brushq3.data_models[i].numbrushes;
-		mod->sortedmodelsurfaces = (int *)Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->sortedmodelsurfaces));
+		mod->firstmodelsurface = submodelfirstsurface[i];
+		mod->nummodelsurfaces = submodelfirstsurface[i+1] - submodelfirstsurface[i];
+		mod->firstmodelbrush = 0;
+		mod->nummodelbrushes = 0;
+		mod->sortedmodelsurfaces = loadmodel->sortedmodelsurfaces + mod->firstmodelsurface;
 		Mod_MakeSortedSurfaces(mod);
 
-		VectorCopy(mod->brushq3.data_models[i].mins, mod->normalmins);
-		VectorCopy(mod->brushq3.data_models[i].maxs, mod->normalmaxs);
-		// enlarge the bounding box to enclose all geometry of this model,
-		// because q3map2 sometimes lies (mostly to affect the lightgrid),
-		// which can in turn mess up the farclip (as well as culling when
-		// outside the level - an unimportant concern)
-
-		//printf("Editing model %d... BEFORE re-bounding: %f %f %f - %f %f %f\n", i, mod->normalmins[0], mod->normalmins[1], mod->normalmins[2], mod->normalmaxs[0], mod->normalmaxs[1], mod->normalmaxs[2]);
+		VectorClear(mod->normalmins);
+		VectorClear(mod->normalmaxs);
+		l = false;
 		for (j = 0;j < mod->nummodelsurfaces;j++)
 		{
 			const msurface_t *surface = mod->data_surfaces + j + mod->firstmodelsurface;
@@ -6223,6 +7710,12 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 			int k;
 			if (!surface->num_vertices)
 				continue;
+			if (!l)
+			{
+				l = true;
+				VectorCopy(v, mod->normalmins);
+				VectorCopy(v, mod->normalmaxs);
+			}
 			for (k = 0;k < surface->num_vertices;k++, v += 3)
 			{
 				mod->normalmins[0] = min(mod->normalmins[0], v[0]);
@@ -6233,7 +7726,6 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 				mod->normalmaxs[2] = max(mod->normalmaxs[2], v[2]);
 			}
 		}
-		//printf("Editing model %d... AFTER re-bounding: %f %f %f - %f %f %f\n", i, mod->normalmins[0], mod->normalmins[1], mod->normalmins[2], mod->normalmaxs[0], mod->normalmaxs[1], mod->normalmaxs[2]);
 		corner[0] = max(fabs(mod->normalmins[0]), fabs(mod->normalmaxs[0]));
 		corner[1] = max(fabs(mod->normalmins[1]), fabs(mod->normalmaxs[1]));
 		corner[2] = max(fabs(mod->normalmins[2]), fabs(mod->normalmaxs[2]));
@@ -6259,28 +7751,958 @@ void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
 			mod->DrawSky = R_Q1BSP_DrawSky;
 
 		for (j = 0;j < mod->nummodelsurfaces;j++)
-			if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION))
+			if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION | MATERIALFLAG_CAMERA))
 				break;
 		if (j < mod->nummodelsurfaces)
 			mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
+
+		Mod_MakeCollisionBIH(mod, true, &mod->collision_bih);
+		mod->render_bih = mod->collision_bih;
+
+		// generate VBOs and other shared data before cloning submodels
+		if (i == 0)
+			Mod_BuildVBOs();
 	}
+	mod = loadmodel;
+	Mem_Free(submodelfirstsurface);
+
+	Con_DPrintf("Stats for obj model \"%s\": %i faces, %i nodes, %i leafs, %i clusters, %i clusterportals, mesh: %i vertices, %i triangles, %i surfaces\n", loadmodel->name, loadmodel->num_surfaces, loadmodel->brush.num_nodes, loadmodel->brush.num_leafs, mod->brush.num_pvsclusters, loadmodel->brush.num_portals, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->num_surfaces);
 }
 
-void Mod_IBSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
+
+
+
+
+
+
+
+
+
+#else // OBJASMODEL
+
+#ifdef OBJWORKS
+typedef struct objvertex_s
 {
-	int i = LittleLong(((int *)buffer)[1]);
-	if (i == Q3BSPVERSION || i == Q3BSPVERSION_IG || i == Q3BSPVERSION_LIVE)
-		Mod_Q3BSP_Load(mod,buffer, bufferend);
-	else if (i == Q2BSPVERSION)
-		Mod_Q2BSP_Load(mod,buffer, bufferend);
+	float v[3];
+	float vt[2];
+	float vn[3];
+}
+objvertex_t;
+
+typedef struct objtriangle_s
+{
+	objvertex_t vertex[3];
+	int textureindex;
+	// these fields are used only in conversion to surfaces
+	int axis;
+	int surfaceindex;
+	int surfacevertexindex[3];
+	float edgeplane[3][4];
+}
+objtriangle_t;
+
+typedef objnode_s
+{
+	struct objnode_s *children[2];
+	struct objnode_s *parent;
+	objtriangle_t *triangles;
+	float normal[3];
+	float dist;
+	float mins[3];
+	float maxs[3];
+	int numtriangles;
+}
+objnode_t;
+
+objnode_t *Mod_OBJ_BSPNodeForTriangles(objnode_t *parent, objtriangle_t *triangles, int numtriangles, const float *mins, const float *maxs, mem_expandablearray_t *nodesarray, int maxclippedtriangles, objtriangle_t *clippedfronttriangles, objtriangle_t *clippedbacktriangles)
+{
+	int i, j;
+	float normal[3];
+	float dist;
+	int score;
+	float bestnormal[3];
+	float bestdist;
+	int bestscore;
+	float mins[3];
+	float maxs[3];
+	int numfronttriangles;
+	int numbacktriangles;
+	int count_front;
+	int count_back;
+	int count_both;
+	int count_on;
+	float outfrontpoints[5][3];
+	float outbackpoints[5][3];
+	int neededfrontpoints;
+	int neededbackpoints;
+	int countonpoints;
+	objnode_t *node;
+
+	node = (objnode_t *)Mem_ExpandableArray_AllocRecord(array);
+	node->parent = parent;
+	if (numtriangles)
+	{
+		VectorCopy(triangles[0].vertex[0].v, mins);
+		VectorCopy(triangles[0].vertex[0].v, maxs);
+	}
+	else if (parent && parent->children[0] == node)
+	{
+		VectorCopy(parent->mins, mins);
+		Vectorcopy(parent->maxs, maxs);
+	}
+	else if (parent && parent->children[1] == node)
+	{
+		VectorCopy(parent->mins, mins);
+		Vectorcopy(parent->maxs, maxs);
+	}
 	else
-		Host_Error("Mod_IBSP_Load: unknown/unsupported version %i", i);
+	{
+		VectorClear(mins);
+		VectorClear(maxs);
+	}
+	for (i = 0;i < numtriangles;i++)
+	{
+		for (j = 0;j < 3;j++)
+		{
+			mins[0] = min(mins[0], triangles[i].vertex[j].v[0]);
+			mins[1] = min(mins[1], triangles[i].vertex[j].v[1]);
+			mins[2] = min(mins[2], triangles[i].vertex[j].v[2]);
+			maxs[0] = max(maxs[0], triangles[i].vertex[j].v[0]);
+			maxs[1] = max(maxs[1], triangles[i].vertex[j].v[1]);
+			maxs[2] = max(maxs[2], triangles[i].vertex[j].v[2]);
+		}
+	}
+	VectorCopy(mins, node->mins);
+	VectorCopy(maxs, node->maxs);
+	if (numtriangles <= mod_obj_leaftriangles.integer)
+	{
+		// create a leaf
+		loadmodel->brush.num_leafs++;
+		node->triangles = triangles;
+		node->numtriangles = numtriangles;
+		return node;
+	}
+
+	// create a node
+	loadmodel->brush.num_nodes++;
+	// pick a splitting plane from the various choices available to us...
+	// early splits simply halve the interval
+	bestscore = 0;
+	VectorClear(bestnormal);
+	bestdist = 0;
+	if (numtriangles <= mod_obj_splitterlimit.integer)
+		limit = numtriangles;
+	else
+		limit = 0;
+	for (i = -3;i < limit;i++)
+	{
+		if (i < 0)
+		{
+			// first we try 3 axial splits (kdtree-like)
+			j = i + 3;
+			VectorClear(normal);
+			normal[j] = 1;
+			dist = (mins[j] + maxs[j]) * 0.5f;
+		}
+		else
+		{
+			// then we try each triangle plane
+			TriangleNormal(triangles[i].vertex[0].v, triangles[i].vertex[1].v, triangles[i].vertex[2].v, normal);
+			VectorNormalize(normal);
+			dist = DotProduct(normal, triangles[i].vertex[0].v);
+			// use positive axial values whenever possible
+			if (normal[0] == -1)
+				normal[0] = 1;
+			if (normal[1] == -1)
+				normal[1] = 1;
+			if (normal[2] == -1)
+				normal[2] = 1;
+			// skip planes that match the current best
+			if (VectorCompare(normal, bestnormal) && dist == bestdist)
+				continue;
+		}
+		count_on = 0;
+		count_front = 0;
+		count_back = 0;
+		count_both = 0;
+		for (j = 0;j < numtriangles;j++)
+		{
+			dists[0] = DotProduct(normal, triangles[j].vertex[0].v) - dist;
+			dists[1] = DotProduct(normal, triangles[j].vertex[1].v) - dist;
+			dists[2] = DotProduct(normal, triangles[j].vertex[2].v) - dist;
+			if (dists[0] < -DIST_EPSILON || dists[1] < -DIST_EPSILON || dists[2] < -DIST_EPSILON)
+			{
+				if (dists[0] > DIST_EPSILON || dists[1] > DIST_EPSILON || dists[2] > DIST_EPSILON)
+					count_both++;
+				else
+					count_back++;
+			}
+			else if (dists[0] > DIST_EPSILON || dists[1] > DIST_EPSILON || dists[2] > DIST_EPSILON)
+				count_front++;
+			else
+				count_on++;
+		}
+		// score is supposed to:
+		// prefer axial splits
+		// prefer evenly dividing the input triangles
+		// prefer triangles on the plane
+		// avoid triangles crossing the plane
+		score = count_on*count_on - count_both*count_both + min(count_front, count_back)*(count_front+count_back);
+		if (normal[0] == 1 || normal[1] == 1 || normal[2] == 1)
+			score *= 2;
+		if (i == -3 || bestscore < score)
+		{
+			VectorCopy(normal, bestnormal);
+			bestdist = dist;
+			bestscore = score;
+		}
+	}
+
+	// now we have chosen an optimal split plane...
+
+	// divide triangles by the splitting plane
+	numfronttriangles = 0;
+	numbacktriangles = 0;
+	for (i = 0;i < numtriangles;i++)
+	{
+		neededfrontpoints = 0;
+		neededbackpoints = 0;
+		countonpoints = 0;
+		PolygonF_Divide(3, triangles[i].vertex[0].v, bestnormal[0], bestnormal[1], bestnormal[2], bestdist, DIST_EPSILON, 5, outfrontpoints[0], &neededfrontpoints, 5, outbackpoints[0], &neededbackpoints, &countonpoints);
+		if (countonpoints > 1)
+		{
+			// triangle lies on plane, assign it to one child only
+			TriangleNormal(triangles[i].vertex[0].v, triangles[i].vertex[1].v, triangles[i].vertex[2].v, normal);
+			if (DotProduct(bestnormal, normal) >= 0)
+			{
+				// assign to front side child
+				obj_fronttriangles[numfronttriangles++] = triangles[i];
+			}
+			else
+			{
+				// assign to back side child
+				obj_backtriangles[numbacktriangles++] = triangles[i];
+			}
+		}
+		else
+		{
+			// convert clipped polygons to triangles
+			for (j = 0;j < neededfrontpoints-2;j++)
+			{
+				obj_fronttriangles[numfronttriangles] = triangles[i];
+				VectorCopy(outfrontpoints[0], obj_fronttriangles[numfronttriangles].vertex[0].v);
+				VectorCopy(outfrontpoints[j+1], obj_fronttriangles[numfronttriangles].vertex[1].v);
+				VectorCopy(outfrontpoints[j+2], obj_fronttriangles[numfronttriangles].vertex[2].v);
+				numfronttriangles++;
+			}
+			for (j = 0;j < neededbackpoints-2;j++)
+			{
+				obj_backtriangles[numbacktriangles] = triangles[i];
+				VectorCopy(outbackpoints[0], obj_backtriangles[numbacktriangles].vertex[0].v);
+				VectorCopy(outbackpoints[j+1], obj_backtriangles[numbacktriangles].vertex[1].v);
+				VectorCopy(outbackpoints[j+2], obj_backtriangles[numbacktriangles].vertex[2].v);
+				numbacktriangles++;
+			}
+		}
+	}
+
+	// now copy the triangles out of the big buffer
+	if (numfronttriangles)
+	{
+		fronttriangles = Mem_Alloc(loadmodel->mempool, fronttriangles * sizeof(*fronttriangles));
+		memcpy(fronttriangles, obj_fronttriangles, numfronttriangles * sizeof(*fronttriangles));
+	}
+	else
+		fronttriangles = NULL;
+	if (numbacktriangles)
+	{
+		backtriangles = Mem_Alloc(loadmodel->mempool, backtriangles * sizeof(*backtriangles));
+		memcpy(backtriangles, obj_backtriangles, numbacktriangles * sizeof(*backtriangles));
+	}
+	else
+		backtriangles = NULL;
+
+	// free the original triangles we were given
+	if (triangles)
+		Mem_Free(triangles);
+	triangles = NULL;
+	numtriangles = 0;
+
+	// now create the children...
+	node->children[0] = Mod_OBJ_BSPNodeForTriangles(node, fronttriangles, numfronttriangles, frontmins, frontmaxs, nodesarray, maxclippedtriangles, clippedfronttriangles, clippedbacktriangles);
+	node->children[1] = Mod_OBJ_BSPNodeForTriangles(node, backtriangles, numbacktriangles, backmins, backmaxs, nodesarray, maxclippedtriangles, clippedfronttriangles, clippedbacktriangles);
+	return node;
 }
 
-void Mod_MAP_Load(dp_model_t *mod, void *buffer, void *bufferend)
+void Mod_OBJ_SnapVertex(float *v)
 {
-	Host_Error("Mod_MAP_Load: not yet implemented");
+	int i;
+	float a = mod_obj_vertexprecision.value;
+	float b = 1.0f / a;
+	v[0] -= floor(v[0] * a + 0.5f) * b;
+	v[1] -= floor(v[1] * a + 0.5f) * b;
+	v[2] -= floor(v[2] * a + 0.5f) * b;
+}
+
+void Mod_OBJ_ConvertBSPNode(objnode_t *objnode, mnode_t *mnodeparent)
+{
+	if (objnode->children[0])
+	{
+		// convert to mnode_t
+		mnode_t *mnode = loadmodel->brush.data_nodes + loadmodel->brush.num_nodes++;
+		mnode->parent = mnodeparent;
+		mnode->plane = loadmodel->brush.data_planes + loadmodel->brush.num_planes++;
+		VectorCopy(objnode->normal, mnode->plane->normal);
+		mnode->plane->dist = objnode->dist;
+		PlaneClassify(mnode->plane);
+		VectorCopy(objnode->mins, mnode->mins);
+		VectorCopy(objnode->maxs, mnode->maxs);
+		// push combinedsupercontents up to the parent
+		if (mnodeparent)
+			mnodeparent->combinedsupercontents |= mnode->combinedsupercontents;
+		mnode->children[0] = Mod_OBJ_ConvertBSPNode(objnode->children[0], mnode);
+		mnode->children[1] = Mod_OBJ_ConvertBSPNode(objnode->children[1], mnode);
+	}
+	else
+	{
+		// convert to mleaf_t
+		mleaf_t *mleaf = loadmodel->brush.data_leafs + loadmodel->brush.num_leafs++;
+		mleaf->parent = mnodeparent;
+		VectorCopy(objnode->mins, mleaf->mins);
+		VectorCopy(objnode->maxs, mleaf->maxs);
+		mleaf->clusterindex = loadmodel->brush.num_leafs - 1;
+		if (objnode->numtriangles)
+		{
+			objtriangle_t *triangles = objnode->triangles;
+			int numtriangles = objnode->numtriangles;
+			texture_t *texture;
+			float edge[3][3];
+			float normal[3];
+			objvertex_t vertex[3];
+			numsurfaces = 0;
+			maxsurfaces = numtriangles;
+			surfaces = NULL;
+			// calculate some more data on each triangle for surface gathering
+			for (i = 0;i < numtriangles;i++)
+			{
+				triangle = triangles + i;
+				texture = loadmodel->data_textures + triangle->textureindex;
+				Mod_OBJ_SnapVertex(triangle->vertex[0].v);
+				Mod_OBJ_SnapVertex(triangle->vertex[1].v);
+				Mod_OBJ_SnapVertex(triangle->vertex[2].v);
+				TriangleNormal(triangle->vertex[0].v, triangle->vertex[1].v, triangle->vertex[2].v, normal);
+				axis = 0;
+				if (fabs(normal[axis]) < fabs(normal[1]))
+					axis = 1;
+				if (fabs(normal[axis]) < fabs(normal[2]))
+					axis = 2;
+				VectorClear(normal);
+				normal[axis] = 1;
+				triangle->axis = axis;
+				VectorSubtract(triangle->vertex[1].v, triangle->vertex[0].v, edge[0]);
+				VectorSubtract(triangle->vertex[2].v, triangle->vertex[1].v, edge[1]);
+				VectorSubtract(triangle->vertex[0].v, triangle->vertex[2].v, edge[2]);
+				CrossProduct(edge[0], normal, triangle->edgeplane[0]);
+				CrossProduct(edge[1], normal, triangle->edgeplane[1]);
+				CrossProduct(edge[2], normal, triangle->edgeplane[2]);
+				VectorNormalize(triangle->edgeplane[0]);
+				VectorNormalize(triangle->edgeplane[1]);
+				VectorNormalize(triangle->edgeplane[2]);
+				triangle->edgeplane[0][3] = DotProduct(triangle->edgeplane[0], triangle->vertex[0].v);
+				triangle->edgeplane[1][3] = DotProduct(triangle->edgeplane[1], triangle->vertex[1].v);
+				triangle->edgeplane[2][3] = DotProduct(triangle->edgeplane[2], triangle->vertex[2].v);
+				triangle->surfaceindex = 0;
+				// add to the combined supercontents while we're here...
+				mleaf->combinedsupercontents |= texture->supercontents;
+			}
+			surfaceindex = 1;
+			for (i = 0;i < numtriangles;i++)
+			{
+				// skip already-assigned triangles
+				if (triangles[i].surfaceindex)
+					continue;
+				texture = loadmodel->data_textures + triangles[i].textureindex;
+				// assign a new surface to this triangle
+				triangles[i].surfaceindex = surfaceindex++;
+				axis = triangles[i].axis;
+				numvertices = 3;
+				// find the triangle's neighbors, this can take multiple passes
+				retry = true;
+				while (retry)
+				{
+					retry = false;
+					for (j = i+1;j < numtriangles;j++)
+					{
+						if (triangles[j].surfaceindex || triangles[j].axis != axis || triangles[j].texture != texture)
+							continue;
+						triangle = triangles + j;
+						for (k = i;k < j;k++)
+						{
+							if (triangles[k].surfaceindex != surfaceindex)
+								continue;
+							if (VectorCompare(triangles[k].vertex[0].v, triangles[j].vertex[0].v)
+							 || VectorCompare(triangles[k].vertex[0].v, triangles[j].vertex[1].v)
+							 || VectorCompare(triangles[k].vertex[0].v, triangles[j].vertex[2].v)
+							 || VectorCompare(triangles[k].vertex[1].v, triangles[j].vertex[0].v)
+							 || VectorCompare(triangles[k].vertex[1].v, triangles[j].vertex[1].v)
+							 || VectorCompare(triangles[k].vertex[1].v, triangles[j].vertex[2].v)
+							 || VectorCompare(triangles[k].vertex[2].v, triangles[j].vertex[0].v)
+							 || VectorCompare(triangles[k].vertex[2].v, triangles[j].vertex[1].v)
+							 || VectorCompare(triangles[k].vertex[2].v, triangles[j].vertex[2].v))
+							{
+								// shares a vertex position
+								--- FIXME ---
+							}
+						}
+						for (k = 0;k < numvertices;k++)
+							if (!VectorCompare(vertex[k].v, triangles[j].vertex[0].v) || !VectorCompare(vertex[k].v, triangles[j].vertex[1].v) || !VectorCompare(vertex[k].v, triangles[j].vertex[2].v))
+								break;
+						if (k == numvertices)
+							break; // not a neighbor
+						// this triangle is a neighbor and has the same axis and texture
+						// check now if it overlaps in lightmap projection space
+						triangles[j].surfaceindex;
+						if (triangles[j].
+					}
+				}
+				//triangles[i].surfaceindex = surfaceindex++;
+				for (surfaceindex = 0;surfaceindex < numsurfaces;surfaceindex++)
+				{
+					if (surfaces[surfaceindex].texture != texture)
+						continue;
+					// check if any triangles already in this surface overlap in lightmap projection space
+					
+					{
+					}
+					break;
+				}
+			}
+			// let the collision code simply use the surfaces
+			mleaf->containscollisionsurfaces = mleaf->combinedsupercontents != 0;
+			mleaf->numleafsurfaces = ?;
+			mleaf->firstleafsurface = ?;
+		}
+		// push combinedsupercontents up to the parent
+		if (mnodeparent)
+			mnodeparent->combinedsupercontents |= mleaf->combinedsupercontents;
+	}
+}
+#endif
+
+void Mod_OBJ_Load(dp_model_t *mod, void *buffer, void *bufferend)
+{
+#ifdef OBJWORKS
+	const char *textbase = (char *)buffer, *text = textbase;
+	char *s;
+	char *argv[512];
+	char line[1024];
+	char materialname[MAX_QPATH];
+	int j, index1, index2, index3, first, prev, index;
+	int argc;
+	int linelen;
+	int numtriangles = 0;
+	int maxtriangles = 131072;
+	objtriangle_t *triangles = Mem_Alloc(tempmempool, maxtriangles * sizeof(*triangles));
+	int linenumber = 0;
+	int maxtextures = 256, numtextures = 0, textureindex = 0;
+	int maxv = 1024, numv = 0;
+	int maxvt = 1024, numvt = 0;
+	int maxvn = 1024, numvn = 0;
+	char **texturenames;
+	float *v = Mem_Alloc(tempmempool, maxv * sizeof(float[3]));
+	float *vt = Mem_Alloc(tempmempool, maxvt * sizeof(float[2]));
+	float *vn = Mem_Alloc(tempmempool, maxvn * sizeof(float[3]));
+	objvertex_t vfirst, vprev, vcurrent;
+	float mins[3];
+	float maxs[3];
+#if 0
+	int hashindex;
+	int maxverthash = 65536, numverthash = 0;
+	int numhashindex = 65536;
+	struct objverthash_s
+	{
+		struct objverthash_s *next;
+		int s;
+		int v;
+		int vt;
+		int vn;
+	}
+	*hash, **verthash = Mem_Alloc(tempmempool, numhashindex * sizeof(*verthash)), *verthashdata = Mem_Alloc(tempmempool, maxverthash * sizeof(*verthashdata)), *oldverthashdata;
+#endif
+
+	dpsnprintf(materialname, sizeof(materialname), "%s", loadmodel->name);
+
+	loadmodel->modeldatatypestring = "OBJ";
+
+	loadmodel->type = mod_obj;
+	loadmodel->soundfromcenter = true;
+	loadmodel->TraceBox = Mod_OBJ_TraceBox;
+	loadmodel->TraceLine = Mod_OBJ_TraceLine;
+	loadmodel->TracePoint = Mod_OBJ_TracePoint;
+	loadmodel->PointSuperContents = Mod_OBJ_PointSuperContents;
+	loadmodel->brush.TraceLineOfSight = Mod_OBJ_TraceLineOfSight;
+	loadmodel->brush.SuperContentsFromNativeContents = Mod_OBJ_SuperContentsFromNativeContents;
+	loadmodel->brush.NativeContentsFromSuperContents = Mod_OBJ_NativeContentsFromSuperContents;
+	loadmodel->brush.GetPVS = Mod_OBJ_GetPVS;
+	loadmodel->brush.FatPVS = Mod_OBJ_FatPVS;
+	loadmodel->brush.BoxTouchingPVS = Mod_OBJ_BoxTouchingPVS;
+	loadmodel->brush.BoxTouchingLeafPVS = Mod_OBJ_BoxTouchingLeafPVS;
+	loadmodel->brush.BoxTouchingVisibleLeafs = Mod_OBJ_BoxTouchingVisibleLeafs;
+	loadmodel->brush.FindBoxClusters = Mod_OBJ_FindBoxClusters;
+	loadmodel->brush.LightPoint = Mod_OBJ_LightPoint;
+	loadmodel->brush.FindNonSolidLocation = Mod_OBJ_FindNonSolidLocation;
+	loadmodel->brush.AmbientSoundLevelsForPoint = NULL;
+	loadmodel->brush.RoundUpToHullSize = NULL;
+	loadmodel->brush.PointInLeaf = Mod_OBJ_PointInLeaf;
+	loadmodel->Draw = R_Q1BSP_Draw;
+	loadmodel->DrawDepth = R_Q1BSP_DrawDepth;
+	loadmodel->DrawDebug = R_Q1BSP_DrawDebug;
+	loadmodel->DrawPrepass = R_Q1BSP_DrawPrepass;
+	loadmodel->GetLightInfo = R_Q1BSP_GetLightInfo;
+	loadmodel->CompileShadowMap = R_Q1BSP_CompileShadowMap;
+	loadmodel->DrawShadowMap = R_Q1BSP_DrawShadowMap;
+	loadmodel->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
+	loadmodel->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
+	loadmodel->DrawLight = R_Q1BSP_DrawLight;
+
+	VectorClear(mins);
+	VectorClear(maxs);
+
+	// parse the OBJ text now
+	for(;;)
+	{
+		if (!*text)
+			break;
+		linenumber++;
+		linelen = 0;
+		for (linelen = 0;text[linelen] && text[linelen] != '\r' && text[linelen] != '\n';linelen++)
+			line[linelen] = text[linelen];
+		line[linelen] = 0;
+		for (argc = 0;argc < (int)(sizeof(argv)/sizeof(argv[0]));argc++)
+			argv[argc] = "";
+		argc = 0;
+		s = line;
+		while (*s == ' ' || *s == '\t')
+			s++;
+		while (*s)
+		{
+			argv[argc++] = s;
+			while (*s > ' ')
+				s++;
+			if (!*s)
+				break;
+			*s++ = 0;
+			while (*s == ' ' || *s == '\t')
+				s++;
+		}
+		if (!argc)
+			continue;
+		if (argv[0][0] == '#')
+			continue;
+		if (!strcmp(argv[0], "v"))
+		{
+			if (maxv <= numv)
+			{
+				float *oldv = v;
+				maxv *= 2;
+				v = Mem_Alloc(tempmempool, maxv * sizeof(float[3]));
+				if (oldv)
+				{
+					memcpy(v, oldv, numv * sizeof(float[3]));
+					Mem_Free(oldv);
+				}
+			}
+			v[numv*3+0] = atof(argv[1]);
+			v[numv*3+1] = atof(argv[2]);
+			v[numv*3+2] = atof(argv[3]);
+			numv++;
+		}
+		else if (!strcmp(argv[0], "vt"))
+		{
+			if (maxvt <= numvt)
+			{
+				float *oldvt = vt;
+				maxvt *= 2;
+				vt = Mem_Alloc(tempmempool, maxvt * sizeof(float[2]));
+				if (oldvt)
+				{
+					memcpy(vt, oldvt, numvt * sizeof(float[2]));
+					Mem_Free(oldvt);
+				}
+			}
+			vt[numvt*2+0] = atof(argv[1]);
+			vt[numvt*2+1] = atof(argv[2]);
+			numvt++;
+		}
+		else if (!strcmp(argv[0], "vn"))
+		{
+			if (maxvn <= numvn)
+			{
+				float *oldvn = vn;
+				maxvn *= 2;
+				vn = Mem_Alloc(tempmempool, maxvn * sizeof(float[3]));
+				if (oldvn)
+				{
+					memcpy(vn, oldvn, numvn * sizeof(float[3]));
+					Mem_Free(oldvn);
+				}
+			}
+			vn[numvn*3+0] = atof(argv[1]);
+			vn[numvn*3+1] = atof(argv[2]);
+			vn[numvn*3+2] = atof(argv[3]);
+			numvn++;
+		}
+		else if (!strcmp(argv[0], "f"))
+		{
+			for (j = 1;j < argc;j++)
+			{
+				index1 = atoi(argv[j]);
+				while(argv[j][0] && argv[j][0] != '/')
+					argv[j]++;
+				if (argv[j][0])
+					argv[j]++;
+				index2 = atoi(argv[j]);
+				while(argv[j][0] && argv[j][0] != '/')
+					argv[j]++;
+				if (argv[j][0])
+					argv[j]++;
+				index3 = atoi(argv[j]);
+				// negative refers to a recent vertex
+				// zero means not specified
+				// positive means an absolute vertex index
+				if (index1 < 0)
+					index1 = numv - index1;
+				if (index2 < 0)
+					index2 = numvt - index2;
+				if (index3 < 0)
+					index3 = numvn - index3;
+				VectorCopy(v + 3*index1, vcurrent.v);
+				Vector2Copy(vt + 2*index2, vcurrent.vt);
+				VectorCopy(vn + 3*index3, vcurrent.vn);
+				if (numtriangles == 0)
+				{
+					VectorCopy(vcurrent.v, mins);
+					VectorCopy(vcurrent.v, maxs);
+				}
+				else
+				{
+					mins[0] = min(mins[0], vcurrent.v[0]);
+					mins[1] = min(mins[1], vcurrent.v[1]);
+					mins[2] = min(mins[2], vcurrent.v[2]);
+					maxs[0] = max(maxs[0], vcurrent.v[0]);
+					maxs[1] = max(maxs[1], vcurrent.v[1]);
+					maxs[2] = max(maxs[2], vcurrent.v[2]);
+				}
+				if (j == 1)
+					vfirst = vcurrent;
+				else if (j >= 3)
+				{
+					if (maxtriangles <= numtriangles)
+					{
+						objtriangle_t *oldtriangles = triangles;
+						maxtriangles *= 2;
+						triangles = Mem_Alloc(tempmempool, maxtriangles * sizeof(*triangles));
+						if (oldtriangles)
+						{
+							memcpy(triangles, oldtriangles, maxtriangles * sizeof(*triangles));
+							Mem_Free(oldtriangles);
+						}
+					}
+					triangles[numtriangles].textureindex = textureindex;
+					triangles[numtriangles].vertex[0] = vfirst;
+					triangles[numtriangles].vertex[1] = vprev;
+					triangles[numtriangles].vertex[2] = vcurrent;
+					numtriangles++;
+				}
+				vprev = vcurrent;
+				prev = index;
+			}
+		}
+		else if (!strcmp(argv[0], "o") || !strcmp(argv[0], "g"))
+			;
+		else if (!!strcmp(argv[0], "usemtl"))
+		{
+			for (i = 0;i < numtextures;i++)
+				if (!strcmp(texturenames[numtextures], argv[1]))
+					break;
+			if (i < numtextures)
+				texture = textures + i;
+			else
+			{
+				if (maxtextures <= numtextures)
+				{
+					texture_t *oldtextures = textures;
+					maxtextures *= 2;
+					textures = Mem_Alloc(tempmempool, maxtextures * sizeof(*textures));
+					if (oldtextures)
+					{
+						memcpy(textures, oldtextures, numtextures * sizeof(*textures));
+						Mem_Free(oldtextures);
+					}
+				}
+				textureindex = numtextures++;
+				texturenames[textureindex] = Mem_Alloc(tempmempool, strlen(argv[1]) + 1);
+				memcpy(texturenames[textureindex], argv[1], strlen(argv[1]) + 1);
+			}
+		}
+		text += linelen;
+		if (*text == '\r')
+			text++;
+		if (*text == '\n')
+			text++;
+	}
+
+	// now that we have the OBJ data loaded as-is, we can convert it
+
+	// load the textures
+	loadmodel->num_textures = numtextures;
+	loadmodel->data_textures = Mem_Alloc(loadmodel->mempool, loadmodel->num_textures * sizeof(texture_t));
+	for (i = 0;i < numtextures;i++)
+		Mod_LoadTextureFromQ3Shader(loadmodel->data_textures + i, texturenames[i], true, true, TEXF_MIPMAP | TEXF_ALPHA | TEXF_ISWORLD | TEXF_PICMIP | TEXF_COMPRESS);
+
+	// free the texturenames array since we are now done with it
+	for (i = 0;i < numtextures;i++)
+	{
+		Mem_Free(texturenames[i]);
+		texturenames[i] = NULL;
+	}
+	Mem_Free(texturenames);
+	texturenames = NULL;
+
+	// copy the model bounds, then enlarge the yaw and rotated bounds according to radius
+	VectorCopy(mins, loadmodel->normalmins);
+	VectorCopy(maxs, loadmodel->normalmaxs);
+	dist = max(fabs(loadmodel->normalmins[0]), fabs(loadmodel->normalmaxs[0]));
+	modelyawradius = max(fabs(loadmodel->normalmins[1]), fabs(loadmodel->normalmaxs[1]));
+	modelyawradius = dist*dist+modelyawradius*modelyawradius;
+	modelradius = max(fabs(loadmodel->normalmins[2]), fabs(loadmodel->normalmaxs[2]));
+	modelradius = modelyawradius + modelradius * modelradius;
+	modelyawradius = sqrt(modelyawradius);
+	modelradius = sqrt(modelradius);
+	loadmodel->yawmins[0] = loadmodel->yawmins[1] = -modelyawradius;
+	loadmodel->yawmins[2] = loadmodel->normalmins[2];
+	loadmodel->yawmaxs[0] = loadmodel->yawmaxs[1] =  modelyawradius;
+	loadmodel->yawmaxs[2] = loadmodel->normalmaxs[2];
+	loadmodel->rotatedmins[0] = loadmodel->rotatedmins[1] = loadmodel->rotatedmins[2] = -modelradius;
+	loadmodel->rotatedmaxs[0] = loadmodel->rotatedmaxs[1] = loadmodel->rotatedmaxs[2] =  modelradius;
+	loadmodel->radius = modelradius;
+	loadmodel->radius2 = modelradius * modelradius;
+
+	// make sure the temp triangle buffer is big enough for BSP building
+	maxclippedtriangles = numtriangles*4;
+	if (numtriangles > 0)
+	{
+		clippedfronttriangles = Mem_Alloc(loadmodel->mempool, maxclippedtriangles * 2 * sizeof(objtriangle_t));
+		clippedbacktriangles = clippedfronttriangles + maxclippedtriangles;
+	}
+
+	// generate a rough BSP tree from triangle data, we don't have to be too careful here, it only has to define the basic areas of the map
+	loadmodel->brush.num_leafs = 0;
+	loadmodel->brush.num_nodes = 0;
+	Mem_ExpandableArray_NewArray(&nodesarray, loadmodel->mempool, sizeof(objnode_t), 1024);
+	rootnode = Mod_OBJ_BSPNodeForTriangles(triangles, numtriangles, mins, maxs, &nodesarray, maxclippedtriangles, clippedfronttriangles, clippedbacktriangles);
+
+	// convert the BSP tree to mnode_t and mleaf_t structures and convert the triangles to msurface_t...
+	loadmodel->brush.data_leafs = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_leafs * sizeof(mleaf_t));
+	loadmodel->brush.data_nodes = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_nodes * sizeof(mnode_t));
+	loadmodel->brush.data_planes = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_nodes * sizeof(mplane_t));
+	loadmodel->brush.num_leafs = 0;
+	loadmodel->brush.num_nodes = 0;
+	loadmodel->brush.num_planes = 0;
+	Mod_OBJ_ConvertAndFreeBSPNode(rootnode);
+
+	if (clippedfronttriangles)
+		Mem_Free(clippedfronttriangles);
+	maxclippedtriangles = 0;
+	clippedfronttriangles = NULL;
+	clippedbacktriangles = NULL;
+
+--- NOTHING DONE PAST THIS POINT ---
+
+	loadmodel->numskins = LittleLong(pinmodel->num_skins);
+	numxyz = LittleLong(pinmodel->num_xyz);
+	numst = LittleLong(pinmodel->num_st);
+	loadmodel->surfmesh.num_triangles = LittleLong(pinmodel->num_tris);
+	loadmodel->numframes = LittleLong(pinmodel->num_frames);
+	loadmodel->surfmesh.num_morphframes = loadmodel->numframes;
+	loadmodel->num_poses = loadmodel->surfmesh.num_morphframes;
+	skinwidth = LittleLong(pinmodel->skinwidth);
+	skinheight = LittleLong(pinmodel->skinheight);
+	iskinwidth = 1.0f / skinwidth;
+	iskinheight = 1.0f / skinheight;
+
+	loadmodel->num_surfaces = 1;
+	loadmodel->nummodelsurfaces = loadmodel->num_surfaces;
+	data = (unsigned char *)Mem_Alloc(loadmodel->mempool, loadmodel->num_surfaces * sizeof(msurface_t) + loadmodel->num_surfaces * sizeof(int) + loadmodel->numframes * sizeof(animscene_t) + loadmodel->numframes * sizeof(float[6]) + loadmodel->surfmesh.num_triangles * sizeof(int[3]) + (r_enableshadowvolume.integer ? loadmodel->surfmesh.num_triangles * sizeof(int[3]) : 0));
+	loadmodel->data_surfaces = (msurface_t *)data;data += loadmodel->num_surfaces * sizeof(msurface_t);
+	loadmodel->sortedmodelsurfaces = (int *)data;data += loadmodel->num_surfaces * sizeof(int);
+	loadmodel->sortedmodelsurfaces[0] = 0;
+	loadmodel->animscenes = (animscene_t *)data;data += loadmodel->numframes * sizeof(animscene_t);
+	loadmodel->surfmesh.data_morphmd2framesize6f = (float *)data;data += loadmodel->numframes * sizeof(float[6]);
+	loadmodel->surfmesh.data_element3i = (int *)data;data += loadmodel->surfmesh.num_triangles * sizeof(int[3]);
+	if (r_enableshadowvolumes.integer)
+		loadmodel->surfmesh.data_neighbor3i = (int *)data;data += loadmodel->surfmesh.num_triangles * sizeof(int[3]);
+
+	loadmodel->synctype = ST_RAND;
+
+	// load the skins
+	inskin = (char *)(base + LittleLong(pinmodel->ofs_skins));
+	skinfiles = Mod_LoadSkinFiles();
+	if (skinfiles)
+	{
+		loadmodel->num_textures = loadmodel->num_surfaces * loadmodel->numskins;
+		loadmodel->num_texturesperskin = loadmodel->num_surfaces;
+		loadmodel->data_textures = (texture_t *)Mem_Alloc(loadmodel->mempool, loadmodel->num_surfaces * loadmodel->numskins * sizeof(texture_t));
+		Mod_BuildAliasSkinsFromSkinFiles(loadmodel->data_textures, skinfiles, "default", "");
+		Mod_FreeSkinFiles(skinfiles);
+	}
+	else if (loadmodel->numskins)
+	{
+		// skins found (most likely not a player model)
+		loadmodel->num_textures = loadmodel->num_surfaces * loadmodel->numskins;
+		loadmodel->num_texturesperskin = loadmodel->num_surfaces;
+		loadmodel->data_textures = (texture_t *)Mem_Alloc(loadmodel->mempool, loadmodel->num_surfaces * loadmodel->numskins * sizeof(texture_t));
+		for (i = 0;i < loadmodel->numskins;i++, inskin += MD2_SKINNAME)
+			Mod_LoadTextureFromQ3Shader(loadmodel->data_textures + i * loadmodel->num_surfaces, inskin, true, true, (r_mipskins.integer ? TEXF_MIPMAP : 0) | TEXF_ALPHA | TEXF_PICMIP | TEXF_COMPRESS);
+	}
+	else
+	{
+		// no skins (most likely a player model)
+		loadmodel->numskins = 1;
+		loadmodel->num_textures = loadmodel->num_surfaces * loadmodel->numskins;
+		loadmodel->num_texturesperskin = loadmodel->num_surfaces;
+		loadmodel->data_textures = (texture_t *)Mem_Alloc(loadmodel->mempool, loadmodel->num_surfaces * loadmodel->numskins * sizeof(texture_t));
+		Mod_BuildAliasSkinFromSkinFrame(loadmodel->data_textures, NULL);
+	}
+
+	loadmodel->skinscenes = (animscene_t *)Mem_Alloc(loadmodel->mempool, sizeof(animscene_t) * loadmodel->numskins);
+	for (i = 0;i < loadmodel->numskins;i++)
+	{
+		loadmodel->skinscenes[i].firstframe = i;
+		loadmodel->skinscenes[i].framecount = 1;
+		loadmodel->skinscenes[i].loop = true;
+		loadmodel->skinscenes[i].framerate = 10;
+	}
+
+	// load the triangles and stvert data
+	inst = (unsigned short *)(base + LittleLong(pinmodel->ofs_st));
+	intri = (md2triangle_t *)(base + LittleLong(pinmodel->ofs_tris));
+	md2verthash = (struct md2verthash_s **)Mem_Alloc(tempmempool, 65536 * sizeof(hash));
+	md2verthashdata = (struct md2verthash_s *)Mem_Alloc(tempmempool, loadmodel->surfmesh.num_triangles * 3 * sizeof(*hash));
+	// swap the triangle list
+	loadmodel->surfmesh.num_vertices = 0;
+	for (i = 0;i < loadmodel->surfmesh.num_triangles;i++)
+	{
+		for (j = 0;j < 3;j++)
+		{
+			xyz = (unsigned short) LittleShort (intri[i].index_xyz[j]);
+			st = (unsigned short) LittleShort (intri[i].index_st[j]);
+			if (xyz >= numxyz)
+			{
+				Con_Printf("%s has an invalid xyz index (%i) on triangle %i, resetting to 0\n", loadmodel->name, xyz, i);
+				xyz = 0;
+			}
+			if (st >= numst)
+			{
+				Con_Printf("%s has an invalid st index (%i) on triangle %i, resetting to 0\n", loadmodel->name, st, i);
+				st = 0;
+			}
+			hashindex = (xyz * 256 + st) & 65535;
+			for (hash = md2verthash[hashindex];hash;hash = hash->next)
+				if (hash->xyz == xyz && hash->st == st)
+					break;
+			if (hash == NULL)
+			{
+				hash = md2verthashdata + loadmodel->surfmesh.num_vertices++;
+				hash->xyz = xyz;
+				hash->st = st;
+				hash->next = md2verthash[hashindex];
+				md2verthash[hashindex] = hash;
+			}
+			loadmodel->surfmesh.data_element3i[i*3+j] = (hash - md2verthashdata);
+		}
+	}
+
+	vertremap = (int *)Mem_Alloc(loadmodel->mempool, loadmodel->surfmesh.num_vertices * sizeof(int));
+	data = (unsigned char *)Mem_Alloc(loadmodel->mempool, loadmodel->surfmesh.num_vertices * sizeof(float[2]) + loadmodel->surfmesh.num_vertices * loadmodel->surfmesh.num_morphframes * sizeof(trivertx_t));
+	loadmodel->surfmesh.data_texcoordtexture2f = (float *)data;data += loadmodel->surfmesh.num_vertices * sizeof(float[2]);
+	loadmodel->surfmesh.data_morphmdlvertex = (trivertx_t *)data;data += loadmodel->surfmesh.num_vertices * loadmodel->surfmesh.num_morphframes * sizeof(trivertx_t);
+	for (i = 0;i < loadmodel->surfmesh.num_vertices;i++)
+	{
+		int sts, stt;
+		hash = md2verthashdata + i;
+		vertremap[i] = hash->xyz;
+		sts = LittleShort(inst[hash->st*2+0]);
+		stt = LittleShort(inst[hash->st*2+1]);
+		if (sts < 0 || sts >= skinwidth || stt < 0 || stt >= skinheight)
+		{
+			Con_Printf("%s has an invalid skin coordinate (%i %i) on vert %i, changing to 0 0\n", loadmodel->name, sts, stt, i);
+			sts = 0;
+			stt = 0;
+		}
+		loadmodel->surfmesh.data_texcoordtexture2f[i*2+0] = sts * iskinwidth;
+		loadmodel->surfmesh.data_texcoordtexture2f[i*2+1] = stt * iskinheight;
+	}
+
+	Mem_Free(md2verthash);
+	Mem_Free(md2verthashdata);
+
+	// generate ushort elements array if possible
+	if (loadmodel->surfmesh.num_vertices <= 65536)
+		loadmodel->surfmesh.data_element3s = (unsigned short *)Mem_Alloc(loadmodel->mempool, sizeof(unsigned short[3]) * loadmodel->surfmesh.num_triangles);
+
+	// load the frames
+	datapointer = (base + LittleLong(pinmodel->ofs_frames));
+	for (i = 0;i < loadmodel->surfmesh.num_morphframes;i++)
+	{
+		int k;
+		trivertx_t *v;
+		trivertx_t *out;
+		pinframe = (md2frame_t *)datapointer;
+		datapointer += sizeof(md2frame_t);
+		// store the frame scale/translate into the appropriate array
+		for (j = 0;j < 3;j++)
+		{
+			loadmodel->surfmesh.data_morphmd2framesize6f[i*6+j] = LittleFloat(pinframe->scale[j]);
+			loadmodel->surfmesh.data_morphmd2framesize6f[i*6+3+j] = LittleFloat(pinframe->translate[j]);
+		}
+		// convert the vertices
+		v = (trivertx_t *)datapointer;
+		out = loadmodel->surfmesh.data_morphmdlvertex + i * loadmodel->surfmesh.num_vertices;
+		for (k = 0;k < loadmodel->surfmesh.num_vertices;k++)
+			out[k] = v[vertremap[k]];
+		datapointer += numxyz * sizeof(trivertx_t);
+
+		strlcpy(loadmodel->animscenes[i].name, pinframe->name, sizeof(loadmodel->animscenes[i].name));
+		loadmodel->animscenes[i].firstframe = i;
+		loadmodel->animscenes[i].framecount = 1;
+		loadmodel->animscenes[i].framerate = 10;
+		loadmodel->animscenes[i].loop = true;
+	}
+
+	Mem_Free(vertremap);
+
+	Mod_MakeSortedSurfaces(loadmodel);
+	if (loadmodel->surfmesh.data_neighbor3i)
+		Mod_BuildTriangleNeighbors(loadmodel->surfmesh.data_neighbor3i, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.num_triangles);
+	Mod_Alias_CalculateBoundingBox();
+	Mod_Alias_MorphMesh_CompileFrames();
+
+	surface = loadmodel->data_surfaces;
+	surface->texture = loadmodel->data_textures;
+	surface->num_firsttriangle = 0;
+	surface->num_triangles = loadmodel->surfmesh.num_triangles;
+	surface->num_firstvertex = 0;
+	surface->num_vertices = loadmodel->surfmesh.num_vertices;
+
+	loadmodel->surfmesh.isanimated = false;
+
+	if (loadmodel->surfmesh.data_element3s)
+		for (i = 0;i < loadmodel->surfmesh.num_triangles*3;i++)
+			loadmodel->surfmesh.data_element3s[i] = loadmodel->surfmesh.data_element3i[i];
+#endif
 }
+#endif // !OBJASMODEL
 
 qboolean Mod_CanSeeBox_Trace(int numsamples, float t, dp_model_t *model, vec3_t eye, vec3_t minsX, vec3_t maxsX)
 {