cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 in_bestweapon_info_t in_bestweapon_info[IN_BESTWEAPON_MAX];
 201
 202 void IN_BestWeapon_Register(const char *name, int impulse, int weaponbit, int activeweaponcode, int ammostat, int ammomin)
 203 {
 204         int i;
 205         for(i = 0; i < IN_BESTWEAPON_MAX && in_bestweapon_info[i].impulse; ++i)
 206                 if(in_bestweapon_info[i].impulse == impulse)
 207                         break;
 208         if(i >= IN_BESTWEAPON_MAX)
 209         {
 210                 Con_Printf("no slot left for weapon definition; increase IN_BESTWEAPON_MAX\n");
 211                 return; // sorry
 212         }
 213         strlcpy(in_bestweapon_info[i].name, name, sizeof(in_bestweapon_info[i].name));
 214         in_bestweapon_info[i].impulse = impulse;
 215         if(weaponbit != -1)
 216                 in_bestweapon_info[i].weaponbit = weaponbit;
 217         if(activeweaponcode != -1)
 218                 in_bestweapon_info[i].activeweaponcode = activeweaponcode;
 219         if(ammostat != -1)
 220                 in_bestweapon_info[i].ammostat = ammostat;
 221         if(ammomin != -1)
 222                 in_bestweapon_info[i].ammomin = ammomin;
 223 }
 224
 225 void IN_BestWeapon_ResetData (void)
 226 {
 227         memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 228         IN_BestWeapon_Register("1", 1, IT_AXE, IT_AXE, STAT_SHELLS, 0);
 229         IN_BestWeapon_Register("2", 2, IT_SHOTGUN, IT_SHOTGUN, STAT_SHELLS, 1);
 230         IN_BestWeapon_Register("3", 3, IT_SUPER_SHOTGUN, IT_SUPER_SHOTGUN, STAT_SHELLS, 1);
 231         IN_BestWeapon_Register("4", 4, IT_NAILGUN, IT_NAILGUN, STAT_NAILS, 1);
 232         IN_BestWeapon_Register("5", 5, IT_SUPER_NAILGUN, IT_SUPER_NAILGUN, STAT_NAILS, 1);
 233         IN_BestWeapon_Register("6", 6, IT_GRENADE_LAUNCHER, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1);
 234         IN_BestWeapon_Register("7", 7, IT_ROCKET_LAUNCHER, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1);
 235         IN_BestWeapon_Register("8", 8, IT_LIGHTNING, IT_LIGHTNING, STAT_CELLS, 1);
 236         IN_BestWeapon_Register("9", 9, 128, 128, STAT_CELLS, 1); // generic energy weapon for mods
 237         IN_BestWeapon_Register("p", 209, 128, 128, STAT_CELLS, 1); // dpmod plasma gun
 238         IN_BestWeapon_Register("w", 210, 8388608, 8388608, STAT_CELLS, 1); // dpmod plasma wave cannon
 239         IN_BestWeapon_Register("l", 225, HIT_LASER_CANNON, HIT_LASER_CANNON, STAT_CELLS, 1); // hipnotic laser cannon
 240         IN_BestWeapon_Register("h", 226, HIT_MJOLNIR, HIT_MJOLNIR, STAT_CELLS, 0); // hipnotic mjolnir hammer
 241 }
 242
 243 void IN_BestWeapon_Register_f (void)
 244 {
 245         if(Cmd_Argc() == 7)
 246         {
 247                 IN_BestWeapon_Register(
 248                         Cmd_Argv(1),
 249                         atoi(Cmd_Argv(2)),
 250                         atoi(Cmd_Argv(3)),
 251                         atoi(Cmd_Argv(4)),
 252                         atoi(Cmd_Argv(5)),
 253                         atoi(Cmd_Argv(6))
 254                 );
 255         }
 256         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "clear"))
 257         {
 258                 memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 259         }
 260         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "quake"))
 261         {
 262                 IN_BestWeapon_ResetData();
 263         }
 264         else
 265         {
 266                 Con_Printf("Usage: %s weaponshortname impulse itemcode activeweaponcode ammostat ammomin; %s clear; %s quake\n", Cmd_Argv(0), Cmd_Argv(0), Cmd_Argv(0));
 267         }
 268 }
 269
 270 void IN_BestWeapon (void)
 271 {
 272         int i, n;
 273         const char *t;
 274         if (Cmd_Argc() < 2)
 275         {
 276                 Con_Printf("bestweapon requires 1 or more parameters\n");
 277                 return;
 278         }
 279         for (i = 1;i < Cmd_Argc();i++)
 280         {
 281                 t = Cmd_Argv(i);
 282                 // figure out which weapon this character refers to
 283                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 284                 {
 285                         if (!strcmp(in_bestweapon_info[n].name, t))
 286                         {
 287                                 // we found out what weapon this character refers to
 288                                 // check if the inventory contains the weapon and enough ammo
 289                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 290                                 {
 291                                         // we found one of the weapons the player wanted
 292                                         // send an impulse to switch to it
 293                                         in_impulse = in_bestweapon_info[n].impulse;
 294                                         return;
 295                                 }
 296                                 break;
 297                         }
 298                 }
 299                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 300         }
 301         // if we couldn't find any of the weapons, there's nothing more we can do...
 302 }
 303
 304 #if 0
 305 void IN_CycleWeapon (void)
 306 {
 307         int i, n;
 308         int first = -1;
 309         qboolean found = false;
 310         const char *t;
 311         if (Cmd_Argc() < 2)
 312         {
 313                 Con_Printf("bestweapon requires 1 or more parameters\n");
 314                 return;
 315         }
 316         for (i = 1;i < Cmd_Argc();i++)
 317         {
 318                 t = Cmd_Argv(i);
 319                 // figure out which weapon this character refers to
 320                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 321                 {
 322                         if (!strcmp(in_bestweapon_info[n].name, t))
 323                         {
 324                                 // we found out what weapon this character refers to
 325                                 // check if the inventory contains the weapon and enough ammo
 326                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 327                                 {
 328                                         // we found one of the weapons the player wanted
 329                                         if(first == -1)
 330                                                 first = n;
 331                                         if(found)
 332                                         {
 333                                                 in_impulse = in_bestweapon_info[n].impulse;
 334                                                 return;
 335                                         }
 336                                         if(cl.stats[STAT_ACTIVEWEAPON] == in_bestweapon_info[n].activeweaponcode)
 337                                                 found = true;
 338                                 }
 339                                 break;
 340                         }
 341                 }
 342                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 343         }
 344         if(first != -1)
 345         {
 346                 in_impulse = in_bestweapon_info[first].impulse;
 347                 return;
 348         }
 349         // if we couldn't find any of the weapons, there's nothing more we can do...
 350 }
 351 #endif
 352
 353 /*
 354 ===============
 355 CL_KeyState
 356
 357 Returns 0.25 if a key was pressed and released during the frame,
 358 0.5 if it was pressed and held
 359 0 if held then released, and
 360 1.0 if held for the entire time
 361 ===============
 362 */
 363 float CL_KeyState (kbutton_t *key)
 364 {
 365         float           val;
 366         qboolean        impulsedown, impulseup, down;
 367
 368         impulsedown = key->state & 2;
 369         impulseup = key->state & 4;
 370         down = key->state & 1;
 371         val = 0;
 372
 373         if (impulsedown && !impulseup)
 374         {
 375                 if (down)
 376                         val = 0.5;      // pressed and held this frame
 377                 else
 378                         val = 0;        //      I_Error ();
 379         }
 380         if (impulseup && !impulsedown)
 381         {
 382                 if (down)
 383                         val = 0;        //      I_Error ();
 384                 else
 385                         val = 0;        // released this frame
 386         }
 387         if (!impulsedown && !impulseup)
 388         {
 389                 if (down)
 390                         val = 1.0;      // held the entire frame
 391                 else
 392                         val = 0;        // up the entire frame
 393         }
 394         if (impulsedown && impulseup)
 395         {
 396                 if (down)
 397                         val = 0.75;     // released and re-pressed this frame
 398                 else
 399                         val = 0.25;     // pressed and released this frame
 400         }
 401
 402         key->state &= 1;                // clear impulses
 403
 404         return val;
 405 }
 406
 407
 408
 409
 410 //==========================================================================
 411
 412 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 413 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 414 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 415 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 416
 417 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 418 cvar_t cl_movecliptokeyboard = {0, "cl_movecliptokeyboard", "0", "if set to 1, any move is clipped to the nine keyboard states; if set to 2, only the direction is clipped, not the amount"};
 419
 420 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 421 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 422
 423 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 424
 425 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 426 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
 427 cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
 428 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 429 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 430 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 431 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 432 cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
 433 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
 434 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "1", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 435 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 436 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 437 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 438 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 439 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 440 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (should match sv_airaccel_qw)"};
 441 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction)"};
 442
 443 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
 444 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
 445
 446 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 447 cvar_t m_accelerate = {CVAR_SAVE, "m_accelerate","1", "mouse acceleration factor (try 2)"};
 448 cvar_t m_accelerate_minspeed = {CVAR_SAVE, "m_accelerate_minspeed","5000", "below this speed, no acceleration is done"};
 449 cvar_t m_accelerate_maxspeed = {CVAR_SAVE, "m_accelerate_maxspeed","10000", "above this speed, full acceleration is done"};
 450 cvar_t m_accelerate_filter = {CVAR_SAVE, "m_accelerate_filter","0.1", "mouse acceleration factor filtering"};
 451
 452 cvar_t cl_netfps = {CVAR_SAVE, "cl_netfps","20", "how many input packets to send to server each second"};
 453 cvar_t cl_netrepeatinput = {CVAR_SAVE, "cl_netrepeatinput", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
 454 cvar_t cl_netimmediatebuttons = {CVAR_SAVE, "cl_netimmediatebuttons", "1", "sends extra packets whenever your buttons change or an impulse is used (basically: whenever you click fire or change weapon)"};
 455
 456 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 457
 458 extern cvar_t v_flipped;
 459
 460 /*
 461 ================
 462 CL_AdjustAngles
 463
 464 Moves the local angle positions
 465 ================
 466 */
 467 void CL_AdjustAngles (void)
 468 {
 469         float   speed;
 470         float   up, down;
 471
 472         if (in_speed.state & 1)
 473                 speed = cl.realframetime * cl_anglespeedkey.value;
 474         else
 475                 speed = cl.realframetime;
 476
 477         if (!(in_strafe.state & 1))
 478         {
 479                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 480                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 481         }
 482         if (in_klook.state & 1)
 483         {
 484                 V_StopPitchDrift ();
 485                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 486                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 487         }
 488
 489         up = CL_KeyState (&in_lookup);
 490         down = CL_KeyState(&in_lookdown);
 491
 492         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 493         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 494
 495         if (up || down)
 496                 V_StopPitchDrift ();
 497
 498         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 499         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
 500         if (cl.viewangles[YAW] >= 180)
 501                 cl.viewangles[YAW] -= 360;
 502         if (cl.viewangles[PITCH] >= 180)
 503                 cl.viewangles[PITCH] -= 360;
 504         cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 505         cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
 506 }
 507
 508 int cl_ignoremousemoves = 2;
 509
 510 /*
 511 ================
 512 CL_Input
 513
 514 Send the intended movement message to the server
 515 ================
 516 */
 517 void CL_Input (void)
 518 {
 519         float mx, my;
 520         static float old_mouse_x = 0, old_mouse_y = 0;
 521
 522         // clamp before the move to prevent starting with bad angles
 523         CL_AdjustAngles ();
 524
 525         if(v_flipped.integer)
 526                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 527
 528         // reset some of the command fields
 529         cl.cmd.forwardmove = 0;
 530         cl.cmd.sidemove = 0;
 531         cl.cmd.upmove = 0;
 532
 533         // get basic movement from keyboard
 534         if (in_strafe.state & 1)
 535         {
 536                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 537                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 538         }
 539
 540         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 541         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 542
 543         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 544         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 545
 546         if (! (in_klook.state & 1) )
 547         {
 548                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 549                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 550         }
 551
 552         // adjust for speed key
 553         if (in_speed.state & 1)
 554         {
 555                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 556                 cl.cmd.sidemove *= cl_movespeedkey.value;
 557                 cl.cmd.upmove *= cl_movespeedkey.value;
 558         }
 559
 560         // allow mice or other external controllers to add to the move
 561         IN_Move ();
 562
 563         // apply m_accelerate if it is on
 564         if(m_accelerate.value > 1)
 565         {
 566                 static float averagespeed = 0;
 567                 float speed, f, mi, ma;
 568
 569                 speed = sqrt(in_mouse_x * in_mouse_x + in_mouse_y * in_mouse_y) / cl.realframetime;
 570                 if(m_accelerate_filter.value > 0)
 571                         f = bound(0, cl.realframetime / m_accelerate_filter.value, 1);
 572                 else
 573                         f = 1;
 574                 averagespeed = speed * f + averagespeed * (1 - f);
 575
 576                 mi = max(1, m_accelerate_minspeed.value);
 577                 ma = max(m_accelerate_minspeed.value + 1, m_accelerate_maxspeed.value);
 578
 579                 if(averagespeed <= mi)
 580                 {
 581                         f = 1;
 582                 }
 583                 else if(averagespeed >= ma)
 584                 {
 585                         f = m_accelerate.value;
 586                 }
 587                 else
 588                 {
 589                         /*
 590                         f = log(averagespeed);
 591                         mi = log(mi);
 592                         ma = log(ma);
 593                         */
 594                         f = averagespeed;
 595                         mi = mi;
 596                         ma = ma;
 597                         f = (f - mi) / (ma - mi) * (m_accelerate.value - 1) + 1;
 598                 }
 599
 600                 in_mouse_x *= f;
 601                 in_mouse_y *= f;
 602         }
 603
 604         // apply m_filter if it is on
 605         mx = in_mouse_x;
 606         my = in_mouse_y;
 607         if (m_filter.integer)
 608         {
 609                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 610                 in_mouse_y = (my + old_mouse_y) * 0.5;
 611         }
 612         old_mouse_x = mx;
 613         old_mouse_y = my;
 614
 615         // ignore a mouse move if mouse was activated/deactivated this frame
 616         if (cl_ignoremousemoves)
 617         {
 618                 cl_ignoremousemoves--;
 619                 in_mouse_x = old_mouse_x = 0;
 620                 in_mouse_y = old_mouse_y = 0;
 621         }
 622
 623         // if not in menu, apply mouse move to viewangles/movement
 624         if (!key_consoleactive && key_dest == key_game && !cl.csqc_wantsmousemove)
 625         {
 626                 float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
 627                 if (cl_prydoncursor.integer)
 628                 {
 629                         // mouse interacting with the scene, mostly stationary view
 630                         V_StopPitchDrift();
 631                         cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
 632                         cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
 633                 }
 634                 else if (in_strafe.state & 1)
 635                 {
 636                         // strafing mode, all looking is movement
 637                         V_StopPitchDrift();
 638                         cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 639                         if (noclip_anglehack)
 640                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 641                         else
 642                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 643                 }
 644                 else if ((in_mlook.state & 1) || freelook.integer)
 645                 {
 646                         // mouselook, lookstrafe causes turning to become strafing
 647                         V_StopPitchDrift();
 648                         if (lookstrafe.integer)
 649                                 cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 650                         else
 651                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 652                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * modulatedsensitivity * cl.viewzoom;
 653                 }
 654                 else
 655                 {
 656                         // non-mouselook, yaw turning and forward/back movement
 657                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 658                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 659                 }
 660         }
 661         else // don't pitch drift when csqc is controlling the mouse
 662                 V_StopPitchDrift();
 663
 664         if(v_flipped.integer)
 665         {
 666                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 667                 cl.cmd.sidemove = -cl.cmd.sidemove;
 668         }
 669
 670         // clamp after the move to prevent rendering with bad angles
 671         CL_AdjustAngles ();
 672
 673         if(cl_movecliptokeyboard.integer)
 674         {
 675                 vec_t f = 1;
 676                 if (in_speed.state & 1)
 677                         f *= cl_movespeedkey.value;
 678                 if(cl_movecliptokeyboard.integer == 2)
 679                 {
 680                         // digital direction, analog amount
 681                         vec_t wishvel_x, wishvel_y;
 682                         f *= max(cl_sidespeed.value, max(cl_forwardspeed.value, cl_backspeed.value));
 683                         wishvel_x = fabs(cl.cmd.forwardmove);
 684                         wishvel_y = fabs(cl.cmd.sidemove);
 685                         if(wishvel_x != 0 && wishvel_y != 0 && wishvel_x != wishvel_y)
 686                         {
 687                                 vec_t wishspeed = sqrt(wishvel_x * wishvel_x + wishvel_y * wishvel_y);
 688                                 if(wishvel_x >= 2 * wishvel_y)
 689                                 {
 690                                         // pure X motion
 691                                         if(cl.cmd.forwardmove > 0)
 692                                                 cl.cmd.forwardmove = wishspeed;
 693                                         else
 694                                                 cl.cmd.forwardmove = -wishspeed;
 695                                         cl.cmd.sidemove = 0;
 696                                 }
 697                                 else if(wishvel_y >= 2 * wishvel_x)
 698                                 {
 699                                         // pure Y motion
 700                                         cl.cmd.forwardmove = 0;
 701                                         if(cl.cmd.sidemove > 0)
 702                                                 cl.cmd.sidemove = wishspeed;
 703                                         else
 704                                                 cl.cmd.sidemove = -wishspeed;
 705                                 }
 706                                 else
 707                                 {
 708                                         // diagonal
 709                                         if(cl.cmd.forwardmove > 0)
 710                                                 cl.cmd.forwardmove = 0.70710678118654752440 * wishspeed;
 711                                         else
 712                                                 cl.cmd.forwardmove = -0.70710678118654752440 * wishspeed;
 713                                         if(cl.cmd.sidemove > 0)
 714                                                 cl.cmd.sidemove = 0.70710678118654752440 * wishspeed;
 715                                         else
 716                                                 cl.cmd.sidemove = -0.70710678118654752440 * wishspeed;
 717                                 }
 718                         }
 719                 }
 720                 else if(cl_movecliptokeyboard.integer)
 721                 {
 722                         // digital direction, digital amount
 723                         if(cl.cmd.sidemove >= cl_sidespeed.value * f * 0.5)
 724                                 cl.cmd.sidemove = cl_sidespeed.value * f;
 725                         else if(cl.cmd.sidemove <= -cl_sidespeed.value * f * 0.5)
 726                                 cl.cmd.sidemove = -cl_sidespeed.value * f;
 727                         else
 728                                 cl.cmd.sidemove = 0;
 729                         if(cl.cmd.forwardmove >= cl_forwardspeed.value * f * 0.5)
 730                                 cl.cmd.forwardmove = cl_forwardspeed.value * f;
 731                         else if(cl.cmd.forwardmove <= -cl_backspeed.value * f * 0.5)
 732                                 cl.cmd.forwardmove = -cl_backspeed.value * f;
 733                         else
 734                                 cl.cmd.forwardmove = 0;
 735                 }
 736         }
 737 }
 738
 739 #include "cl_collision.h"
 740
 741 void CL_UpdatePrydonCursor(void)
 742 {
 743         vec3_t temp;
 744
 745         if (!cl_prydoncursor.integer)
 746                 VectorClear(cl.cmd.cursor_screen);
 747
 748         /*
 749         if (cl.cmd.cursor_screen[0] < -1)
 750         {
 751                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 752                 cl.cmd.cursor_screen[0] = -1;
 753         }
 754         if (cl.cmd.cursor_screen[0] > 1)
 755         {
 756                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 757                 cl.cmd.cursor_screen[0] = 1;
 758         }
 759         if (cl.cmd.cursor_screen[1] < -1)
 760         {
 761                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 762                 cl.cmd.cursor_screen[1] = -1;
 763         }
 764         if (cl.cmd.cursor_screen[1] > 1)
 765         {
 766                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 767                 cl.cmd.cursor_screen[1] = 1;
 768         }
 769         */
 770         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 771         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 772         cl.cmd.cursor_screen[2] = 1;
 773
 774         // calculate current view matrix
 775         Matrix4x4_OriginFromMatrix(&r_refdef.view.matrix, cl.cmd.cursor_start);
 776         // calculate direction vector of cursor in viewspace by using frustum slopes
 777         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
 778         Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
 779         // trace from view origin to the cursor
 780         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
 781 }
 782
 783 typedef enum waterlevel_e
 784 {
 785         WATERLEVEL_NONE,
 786         WATERLEVEL_WETFEET,
 787         WATERLEVEL_SWIMMING,
 788         WATERLEVEL_SUBMERGED
 789 }
 790 waterlevel_t;
 791
 792 typedef struct cl_clientmovement_state_s
 793 {
 794         // position
 795         vec3_t origin;
 796         vec3_t velocity;
 797         // current bounding box (different if crouched vs standing)
 798         vec3_t mins;
 799         vec3_t maxs;
 800         // currently on the ground
 801         qboolean onground;
 802         // currently crouching
 803         qboolean crouched;
 804         // what kind of water (SUPERCONTENTS_LAVA for instance)
 805         int watertype;
 806         // how deep
 807         waterlevel_t waterlevel;
 808         // weird hacks when jumping out of water
 809         // (this is in seconds and counts down to 0)
 810         float waterjumptime;
 811
 812         // user command
 813         usercmd_t cmd;
 814 }
 815 cl_clientmovement_state_t;
 816
 817 #define NUMOFFSETS 27
 818 static vec3_t offsets[NUMOFFSETS] =
 819 {
 820 // 1 no nudge (just return the original if this test passes)
 821         { 0.000,  0.000,  0.000},
 822 // 6 simple nudges
 823         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 824         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 825         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 826 // 4 diagonal flat nudges
 827         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 828         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 829 // 8 diagonal upward nudges
 830         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 831         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 832         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 833         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 834 // 8 diagonal downward nudges
 835         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 836         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 837         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 838         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 839 };
 840
 841 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 842 {
 843         int i;
 844         vec3_t neworigin;
 845         for (i = 0;i < NUMOFFSETS;i++)
 846         {
 847                 VectorAdd(offsets[i], s->origin, neworigin);
 848                 if (!CL_Move(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
 849                 {
 850                         VectorCopy(neworigin, s->origin);
 851                         return true;
 852                 }
 853         }
 854         // if all offsets failed, give up
 855         return false;
 856 }
 857
 858 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 859 {
 860         vec3_t origin1, origin2;
 861         trace_t trace;
 862
 863         // make sure player is not stuck
 864         CL_ClientMovement_Unstick(s);
 865
 866         // set crouched
 867         if (s->cmd.crouch)
 868         {
 869                 // wants to crouch, this always works..
 870                 if (!s->crouched)
 871                         s->crouched = true;
 872         }
 873         else
 874         {
 875                 // wants to stand, if currently crouching we need to check for a
 876                 // low ceiling first
 877                 if (s->crouched)
 878                 {
 879                         trace = CL_Move(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 880                         if (!trace.startsolid)
 881                                 s->crouched = false;
 882                 }
 883         }
 884         if (s->crouched)
 885         {
 886                 VectorCopy(cl.playercrouchmins, s->mins);
 887                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 888         }
 889         else
 890         {
 891                 VectorCopy(cl.playerstandmins, s->mins);
 892                 VectorCopy(cl.playerstandmaxs, s->maxs);
 893         }
 894
 895         // set onground
 896         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 897         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 1); // -2 causes clientside doublejump bug at above 150fps, raising that to 300fps :)
 898         trace = CL_Move(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 899         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 900
 901         // set watertype/waterlevel
 902         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 903         s->waterlevel = WATERLEVEL_NONE;
 904         s->watertype = CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 905         if (s->watertype)
 906         {
 907                 s->waterlevel = WATERLEVEL_WETFEET;
 908                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 909                 if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 910                 {
 911                         s->waterlevel = WATERLEVEL_SWIMMING;
 912                         origin1[2] = s->origin[2] + 22;
 913                         if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 914                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 915                 }
 916         }
 917
 918         // water jump prediction
 919         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 920                 s->waterjumptime = 0;
 921 }
 922
 923 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 924 {
 925         int bump;
 926         double t;
 927         vec_t f;
 928         vec3_t neworigin;
 929         vec3_t currentorigin2;
 930         vec3_t neworigin2;
 931         vec3_t primalvelocity;
 932         trace_t trace;
 933         trace_t trace2;
 934         trace_t trace3;
 935         CL_ClientMovement_UpdateStatus(s);
 936         VectorCopy(s->velocity, primalvelocity);
 937         for (bump = 0, t = s->cmd.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 938         {
 939                 VectorMA(s->origin, t, s->velocity, neworigin);
 940                 trace = CL_Move(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 941                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 942                 {
 943                         // may be a step or wall, try stepping up
 944                         // first move forward at a higher level
 945                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
 946                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
 947                         trace2 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 948                         if (!trace2.startsolid)
 949                         {
 950                                 // then move down from there
 951                                 VectorCopy(trace2.endpos, currentorigin2);
 952                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 953                                 trace3 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 954                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 955                                 // accept the new trace if it made some progress
 956                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 957                                 {
 958                                         trace = trace2;
 959                                         VectorCopy(trace3.endpos, trace.endpos);
 960                                 }
 961                         }
 962                 }
 963
 964                 // check if it moved at all
 965                 if (trace.fraction >= 0.001)
 966                         VectorCopy(trace.endpos, s->origin);
 967
 968                 // check if it moved all the way
 969                 if (trace.fraction == 1)
 970                         break;
 971
 972                 //if (trace.plane.normal[2] > 0.7)
 973                 //      s->onground = true;
 974
 975                 t -= t * trace.fraction;
 976
 977                 f = DotProduct(s->velocity, trace.plane.normal);
 978                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 979         }
 980         if (s->waterjumptime > 0)
 981                 VectorCopy(primalvelocity, s->velocity);
 982 }
 983
 984
 985 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 986 {
 987         vec_t wishspeed;
 988         vec_t f;
 989         vec3_t wishvel;
 990         vec3_t wishdir;
 991
 992         // water jump only in certain situations
 993         // this mimics quakeworld code
 994         if (s->cmd.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
 995         {
 996                 vec3_t forward;
 997                 vec3_t yawangles;
 998                 vec3_t spot;
 999                 VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1000                 AngleVectors(yawangles, forward, NULL, NULL);
1001                 VectorMA(s->origin, 24, forward, spot);
1002                 spot[2] += 8;
1003                 if (CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1004                 {
1005                         spot[2] += 24;
1006                         if (!CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1007                         {
1008                                 VectorScale(forward, 50, s->velocity);
1009                                 s->velocity[2] = 310;
1010                                 s->waterjumptime = 2;
1011                                 s->onground = false;
1012                                 s->cmd.canjump = false;
1013                         }
1014                 }
1015         }
1016
1017         if (!(s->cmd.forwardmove*s->cmd.forwardmove + s->cmd.sidemove*s->cmd.sidemove + s->cmd.upmove*s->cmd.upmove))
1018         {
1019                 // drift towards bottom
1020                 VectorSet(wishvel, 0, 0, -60);
1021         }
1022         else
1023         {
1024                 // swim
1025                 vec3_t forward;
1026                 vec3_t right;
1027                 vec3_t up;
1028                 // calculate movement vector
1029                 AngleVectors(s->cmd.viewangles, forward, right, up);
1030                 VectorSet(up, 0, 0, 1);
1031                 VectorMAMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, s->cmd.upmove, up, wishvel);
1032         }
1033
1034         // split wishvel into wishspeed and wishdir
1035         wishspeed = VectorLength(wishvel);
1036         if (wishspeed)
1037                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1038         else
1039                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1040         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
1041
1042         if (s->crouched)
1043                 wishspeed *= 0.5;
1044
1045         if (s->waterjumptime <= 0)
1046         {
1047                 // water friction
1048                 f = 1 - s->cmd.frametime * cl.movevars_waterfriction * (cls.protocol == PROTOCOL_QUAKEWORLD ? s->waterlevel : 1);
1049                 f = bound(0, f, 1);
1050                 VectorScale(s->velocity, f, s->velocity);
1051
1052                 // water acceleration
1053                 f = wishspeed - DotProduct(s->velocity, wishdir);
1054                 if (f > 0)
1055                 {
1056                         f = min(cl.movevars_wateraccelerate * s->cmd.frametime * wishspeed, f);
1057                         VectorMA(s->velocity, f, wishdir, s->velocity);
1058                 }
1059
1060                 // holding jump button swims upward slowly
1061                 if (s->cmd.jump)
1062                 {
1063                         if (s->watertype & SUPERCONTENTS_LAVA)
1064                                 s->velocity[2] =  50;
1065                         else if (s->watertype & SUPERCONTENTS_SLIME)
1066                                 s->velocity[2] =  80;
1067                         else
1068                         {
1069                                 if (gamemode == GAME_NEXUIZ)
1070                                         s->velocity[2] = 200;
1071                                 else
1072                                         s->velocity[2] = 100;
1073                         }
1074                 }
1075         }
1076
1077         CL_ClientMovement_Move(s);
1078 }
1079
1080 void CL_ClientMovement_Physics_CPM_PM_Aircontrol(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1081 {
1082         vec_t zspeed, speed, dot, k;
1083
1084         if(s->cmd.forwardmove == 0 || s->cmd.sidemove != 0)
1085                 return;
1086
1087         zspeed = s->velocity[2];
1088         s->velocity[2] = 0;
1089         speed = VectorNormalizeLength(s->velocity);
1090
1091         dot = DotProduct(s->velocity, wishdir);
1092         k = 32;
1093         k *= cl.movevars_aircontrol*dot*dot*s->cmd.frametime;
1094
1095         if(dot > 0) { // we can't change direction while slowing down
1096                 VectorMAM(speed, s->velocity, k, wishdir, s->velocity);
1097                 VectorNormalize(s->velocity);
1098         }
1099
1100         VectorScale(s->velocity, speed, s->velocity);
1101         s->velocity[2] = zspeed;
1102 }
1103
1104 void CL_ClientMovement_Physics_PM_Accelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed, vec_t accel, vec_t accelqw, vec_t sidefric)
1105 {
1106         vec_t vel_straight, vel_z;
1107         vec3_t vel_perpend;
1108         vec_t addspeed;
1109         vec_t savespeed;
1110
1111         savespeed = VectorLength2(s->velocity);
1112
1113         vel_straight = DotProduct(s->velocity, wishdir);
1114         vel_z = s->velocity[2];
1115         VectorMA(s->velocity, -vel_straight, wishdir, vel_perpend); vel_perpend[2] -= vel_z;
1116
1117         addspeed = wishspeed - vel_straight;
1118         if(addspeed > 0)
1119                 vel_straight = vel_straight + min(addspeed, accel * s->cmd.frametime * wishspeed) * accelqw;
1120         if(wishspeed > 0)
1121                 vel_straight = vel_straight + min(wishspeed, accel * s->cmd.frametime * wishspeed) * (1 - accelqw);
1122
1123         if(sidefric < 0 && VectorLength2(vel_perpend))
1124         {
1125                 vec_t f, fmin;
1126                 f = 1 + s->cmd.frametime * wishspeed * sidefric;
1127                 fmin = (savespeed - vel_straight*vel_straight) / VectorLength2(vel_perpend);
1128                 if(fmin <= 0)
1129                         VectorScale(vel_perpend, f, vel_perpend);
1130                 else
1131                         VectorScale(vel_perpend, min(1.0f, max(fmin, f)), vel_perpend);
1132         }
1133         else
1134                 VectorScale(vel_perpend, 1 - s->cmd.frametime * wishspeed * sidefric, vel_perpend);
1135
1136         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1137         s->velocity[2] += vel_z;
1138 }
1139
1140 void CL_ClientMovement_Physics_PM_AirAccelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1141 {
1142     vec3_t curvel, wishvel, acceldir, curdir;
1143     float addspeed, accelspeed, curspeed;
1144     float dot;
1145
1146     float airforwardaccel = cl.movevars_warsowbunny_airforwardaccel;
1147     float bunnyaccel = cl.movevars_warsowbunny_accel;
1148     float bunnytopspeed = cl.movevars_warsowbunny_topspeed;
1149     float turnaccel = cl.movevars_warsowbunny_turnaccel;
1150     float backtosideratio = cl.movevars_warsowbunny_backtosideratio;
1151
1152     if( !wishspeed )
1153         return;
1154
1155     VectorCopy( s->velocity, curvel );
1156     curvel[2] = 0;
1157     curspeed = VectorLength( curvel );
1158
1159     if( wishspeed > curspeed * 1.01f )
1160     {
1161         float accelspeed = curspeed + airforwardaccel * cl.movevars_maxairspeed * s->cmd.frametime;
1162         if( accelspeed < wishspeed )
1163             wishspeed = accelspeed;
1164     }
1165     else
1166     {
1167         float f = ( bunnytopspeed - curspeed ) / ( bunnytopspeed - cl.movevars_maxairspeed );
1168         if( f < 0 )
1169             f = 0;
1170         wishspeed = max( curspeed, cl.movevars_maxairspeed ) + bunnyaccel * f * cl.movevars_maxairspeed * s->cmd.frametime;
1171     }
1172     VectorScale( wishdir, wishspeed, wishvel );
1173     VectorSubtract( wishvel, curvel, acceldir );
1174     addspeed = VectorNormalizeLength( acceldir );
1175
1176     accelspeed = turnaccel * cl.movevars_maxairspeed /* wishspeed */ * s->cmd.frametime;
1177     if( accelspeed > addspeed )
1178         accelspeed = addspeed;
1179
1180     if( backtosideratio < 1.0f )
1181     {
1182         VectorNormalize2( curvel, curdir );
1183         dot = DotProduct( acceldir, curdir );
1184         if( dot < 0 )
1185             VectorMA( acceldir, -( 1.0f - backtosideratio ) * dot, curdir, acceldir );
1186     }
1187
1188     VectorMA( s->velocity, accelspeed, acceldir, s->velocity );
1189 }
1190
1191 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
1192 {
1193         vec_t friction;
1194         vec_t wishspeed;
1195         vec_t addspeed;
1196         vec_t accelspeed;
1197         vec_t f;
1198         vec3_t forward;
1199         vec3_t right;
1200         vec3_t up;
1201         vec3_t wishvel;
1202         vec3_t wishdir;
1203         vec3_t yawangles;
1204         trace_t trace;
1205
1206         // jump if on ground with jump button pressed but only if it has been
1207         // released at least once since the last jump
1208         if (s->cmd.jump)
1209         {
1210                 if (s->onground && (s->cmd.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
1211                 {
1212                         s->velocity[2] += cl.movevars_jumpvelocity;
1213                         s->onground = false;
1214                         s->cmd.canjump = false;
1215                 }
1216         }
1217         else
1218                 s->cmd.canjump = true;
1219
1220         // calculate movement vector
1221         VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1222         AngleVectors(yawangles, forward, right, up);
1223         VectorMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, wishvel);
1224
1225         // split wishvel into wishspeed and wishdir
1226         wishspeed = VectorLength(wishvel);
1227         if (wishspeed)
1228                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1229         else
1230                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1231         // check if onground
1232         if (s->onground)
1233         {
1234                 wishspeed = min(wishspeed, cl.movevars_maxspeed);
1235                 if (s->crouched)
1236                         wishspeed *= 0.5;
1237
1238                 // apply edge friction
1239                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1240                 if (f > 0)
1241                 {
1242                         friction = cl.movevars_friction;
1243                         if (cl.movevars_edgefriction != 1)
1244                         {
1245                                 vec3_t neworigin2;
1246                                 vec3_t neworigin3;
1247                                 // note: QW uses the full player box for the trace, and yet still
1248                                 // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1249                                 // this mimics it for compatibility
1250                                 VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1251                                 VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1252                                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1253                                         trace = CL_Move(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1254                                 else
1255                                         trace = CL_Move(neworigin2, vec3_origin, vec3_origin, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1256                                 if (trace.fraction == 1 && !trace.startsolid)
1257                                         friction *= cl.movevars_edgefriction;
1258                         }
1259                         // apply ground friction
1260                         f = 1 - s->cmd.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
1261                         f = max(f, 0);
1262                         VectorScale(s->velocity, f, s->velocity);
1263                 }
1264                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1265                 if (addspeed > 0)
1266                 {
1267                         accelspeed = min(cl.movevars_accelerate * s->cmd.frametime * wishspeed, addspeed);
1268                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1269                 }
1270                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1271                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1272                         s->velocity[2] = 0;
1273                 if (VectorLength2(s->velocity))
1274                         CL_ClientMovement_Move(s);
1275         }
1276         else
1277         {
1278                 if (s->waterjumptime <= 0)
1279                 {
1280                         // apply air speed limit
1281                         vec_t accel, wishspeed2, accelqw;
1282                         qboolean accelerating;
1283
1284                         accelqw = cl.movevars_airaccel_qw;
1285                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1286                         if (s->crouched)
1287                                 wishspeed *= 0.5;
1288                         accel = cl.movevars_airaccelerate;
1289
1290                         accelerating = (DotProduct(s->velocity, wishdir) > 0);
1291                         wishspeed2 = wishspeed;
1292
1293                         // CPM: air control
1294                         if(cl.movevars_airstopaccelerate != 0)
1295                                 if(DotProduct(s->velocity, wishdir) < 0)
1296                                         accel = cl.movevars_airstopaccelerate;
1297                         if(s->cmd.forwardmove == 0 && s->cmd.sidemove != 0)
1298                         {
1299                                 if(cl.movevars_maxairstrafespeed)
1300                                 {
1301                                         if(wishspeed > cl.movevars_maxairstrafespeed)
1302                                                 wishspeed = cl.movevars_maxairstrafespeed;
1303                                         if(cl.movevars_maxairstrafespeed < cl.movevars_maxairspeed)
1304                                                 accelqw = 1;
1305                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1306                                                 // if partially non-QW acceleration is used (as in, strafing
1307                                                 // would get faster than moving forward straight)
1308                                 }
1309                                 if(cl.movevars_airstrafeaccelerate)
1310                                 {
1311                                         accel = cl.movevars_airstrafeaccelerate;
1312                                         if(cl.movevars_airstrafeaccelerate > cl.movevars_airaccelerate)
1313                                                 accelqw = 1;
1314                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1315                                                 // if partially non-QW acceleration is used (as in, strafing
1316                                                 // would get faster than moving forward straight)
1317                                 }
1318                         }
1319                         // !CPM
1320
1321                         if(cl.movevars_warsowbunny_turnaccel && accelerating && s->cmd.sidemove == 0 && s->cmd.forwardmove != 0)
1322                                 CL_ClientMovement_Physics_PM_AirAccelerate(s, wishdir, wishspeed2);
1323                         else
1324                                 CL_ClientMovement_Physics_PM_Accelerate(s, wishdir, wishspeed, accel, accelqw, cl.movevars_airaccel_sideways_friction / cl.movevars_maxairspeed);
1325
1326                         if(cl.movevars_aircontrol)
1327                                 CL_ClientMovement_Physics_CPM_PM_Aircontrol(s, wishdir, wishspeed2);
1328                 }
1329                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1330                 CL_ClientMovement_Move(s);
1331         }
1332 }
1333
1334 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1335 {
1336         //Con_Printf(" %f", frametime);
1337         if (!s->cmd.jump)
1338                 s->cmd.canjump = true;
1339         s->waterjumptime -= s->cmd.frametime;
1340         CL_ClientMovement_UpdateStatus(s);
1341         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1342                 CL_ClientMovement_Physics_Swim(s);
1343         else
1344                 CL_ClientMovement_Physics_Walk(s);
1345 }
1346
1347 extern cvar_t slowmo;
1348 void CL_UpdateMoveVars(void)
1349 {
1350         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1351         {
1352         }
1353         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1354         {
1355                 cl.movevars_ticrate = cl.statsf[STAT_MOVEVARS_TICRATE];
1356                 cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1357                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1358                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1359                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1360                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1361                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1362                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1363                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1364                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1365                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1366                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1367                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1368                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1369                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1370                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1371                 cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
1372                 cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
1373                 cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
1374                 cl.movevars_airstopaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTOPACCELERATE];
1375                 cl.movevars_airstrafeaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCELERATE];
1376                 cl.movevars_maxairstrafespeed = cl.statsf[STAT_MOVEVARS_MAXAIRSTRAFESPEED];
1377                 cl.movevars_aircontrol = cl.statsf[STAT_MOVEVARS_AIRCONTROL];
1378                 cl.movevars_warsowbunny_airforwardaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_AIRFORWARDACCEL];
1379                 cl.movevars_warsowbunny_accel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_ACCEL];
1380                 cl.movevars_warsowbunny_topspeed = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TOPSPEED];
1381                 cl.movevars_warsowbunny_turnaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TURNACCEL];
1382                 cl.movevars_warsowbunny_backtosideratio = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_BACKTOSIDERATIO];
1383         }
1384         else
1385         {
1386                 cl.movevars_ticrate = slowmo.value / bound(1.0f, cl_netfps.value, 1000.0f);
1387                 cl.movevars_timescale = slowmo.value;
1388                 cl.movevars_gravity = sv_gravity.value;
1389                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1390                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1391                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1392                 cl.movevars_accelerate = cl_movement_accelerate.value;
1393                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1394                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1395                 cl.movevars_friction = cl_movement_friction.value;
1396                 cl.movevars_wallfriction = cl_movement_wallfriction.value;
1397                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1398                 cl.movevars_entgravity = 1;
1399                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1400                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1401                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1402                 cl.movevars_stepheight = cl_movement_stepheight.value;
1403                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1404                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1405                 cl.movevars_airstopaccelerate = 0;
1406                 cl.movevars_airstrafeaccelerate = 0;
1407                 cl.movevars_maxairstrafespeed = 0;
1408                 cl.movevars_aircontrol = 0;
1409                 cl.movevars_warsowbunny_airforwardaccel = 0;
1410                 cl.movevars_warsowbunny_accel = 0;
1411                 cl.movevars_warsowbunny_topspeed = 0;
1412                 cl.movevars_warsowbunny_turnaccel = 0;
1413                 cl.movevars_warsowbunny_backtosideratio = 0;
1414         }
1415 }
1416
1417 void CL_ClientMovement_Replay(void)
1418 {
1419         int i;
1420         double totalmovemsec;
1421         cl_clientmovement_state_t s;
1422
1423         if (cl.movement_predicted && !cl.movement_replay)
1424                 return;
1425
1426         // set up starting state for the series of moves
1427         memset(&s, 0, sizeof(s));
1428         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1429         VectorCopy(cl.mvelocity[0], s.velocity);
1430         s.crouched = true; // will be updated on first move
1431         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1432
1433         totalmovemsec = 0;
1434         for (i = 0;i < CL_MAX_USERCMDS;i++)
1435                 if (cl.movecmd[i].sequence > cls.servermovesequence)
1436                         totalmovemsec += cl.movecmd[i].msec;
1437         cl.movement_predicted = totalmovemsec >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1438         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovemsec, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1439         if (cl.movement_predicted)
1440         {
1441                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1442
1443                 // replay the input queue to predict current location
1444                 // note: this relies on the fact there's always one queue item at the end
1445
1446                 // find how many are still valid
1447                 for (i = 0;i < CL_MAX_USERCMDS;i++)
1448                         if (cl.movecmd[i].sequence <= cls.servermovesequence)
1449                                 break;
1450                 // now walk them in oldest to newest order
1451                 for (i--;i >= 0;i--)
1452                 {
1453                         s.cmd = cl.movecmd[i];
1454                         if (i < CL_MAX_USERCMDS - 1)
1455                                 s.cmd.canjump = cl.movecmd[i+1].canjump;
1456                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1457                         //Con_Printf("%i ", s.cmd.msec);
1458                         if (s.cmd.frametime > 0.05)
1459                         {
1460                                 s.cmd.frametime /= 2;
1461                                 CL_ClientMovement_PlayerMove(&s);
1462                         }
1463                         CL_ClientMovement_PlayerMove(&s);
1464                         cl.movecmd[i].canjump = s.cmd.canjump;
1465                 }
1466                 //Con_Printf("\n");
1467         }
1468         else
1469         {
1470                 // get the first movement queue entry to know whether to crouch and such
1471                 s.cmd = cl.movecmd[0];
1472         }
1473         CL_ClientMovement_UpdateStatus(&s);
1474
1475         if (cls.demoplayback) // for bob, speedometer
1476                 VectorCopy(cl.mvelocity[0], cl.movement_velocity);
1477         else
1478         {
1479                 cl.movement_replay = false;
1480                 // update the interpolation target position and velocity
1481                 VectorCopy(s.origin, cl.movement_origin);
1482                 VectorCopy(s.velocity, cl.movement_velocity);
1483         }
1484
1485         // update the onground flag if appropriate
1486         if (cl.movement_predicted)
1487         {
1488                 // when predicted we simply set the flag according to the UpdateStatus
1489                 cl.onground = s.onground;
1490         }
1491         else
1492         {
1493                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1494                 // an update packet is received, but can be forced on here to hide
1495                 // server inconsistencies in the onground flag
1496                 // (which mostly occur when stepping up stairs at very high framerates
1497                 //  where after the step up the move continues forward and not
1498                 //  downward so the ground is not detected)
1499                 //
1500                 // such onground inconsistencies can cause jittery gun bobbing and
1501                 // stair smoothing, so we set onground if UpdateStatus says so
1502                 if (s.onground)
1503                         cl.onground = true;
1504         }
1505
1506         // react to onground state changes (for gun bob)
1507         if (cl.onground)
1508         {
1509                 if (!cl.oldonground)
1510                         cl.hitgroundtime = cl.movecmd[0].time;
1511                 cl.lastongroundtime = cl.movecmd[0].time;
1512         }
1513         cl.oldonground = cl.onground;
1514 }
1515
1516 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1517 {
1518         int bits;
1519
1520         bits = 0;
1521         if (to->viewangles[0] != from->viewangles[0])
1522                 bits |= QW_CM_ANGLE1;
1523         if (to->viewangles[1] != from->viewangles[1])
1524                 bits |= QW_CM_ANGLE2;
1525         if (to->viewangles[2] != from->viewangles[2])
1526                 bits |= QW_CM_ANGLE3;
1527         if (to->forwardmove != from->forwardmove)
1528                 bits |= QW_CM_FORWARD;
1529         if (to->sidemove != from->sidemove)
1530                 bits |= QW_CM_SIDE;
1531         if (to->upmove != from->upmove)
1532                 bits |= QW_CM_UP;
1533         if (to->buttons != from->buttons)
1534                 bits |= QW_CM_BUTTONS;
1535         if (to->impulse != from->impulse)
1536                 bits |= QW_CM_IMPULSE;
1537
1538         MSG_WriteByte(buf, bits);
1539         if (bits & QW_CM_ANGLE1)
1540                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1541         if (bits & QW_CM_ANGLE2)
1542                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1543         if (bits & QW_CM_ANGLE3)
1544                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1545         if (bits & QW_CM_FORWARD)
1546                 MSG_WriteShort(buf, (short) to->forwardmove);
1547         if (bits & QW_CM_SIDE)
1548                 MSG_WriteShort(buf, (short) to->sidemove);
1549         if (bits & QW_CM_UP)
1550                 MSG_WriteShort(buf, (short) to->upmove);
1551         if (bits & QW_CM_BUTTONS)
1552                 MSG_WriteByte(buf, to->buttons);
1553         if (bits & QW_CM_IMPULSE)
1554                 MSG_WriteByte(buf, to->impulse);
1555         MSG_WriteByte(buf, to->msec);
1556 }
1557
1558 /*
1559 ==============
1560 CL_SendMove
1561 ==============
1562 */
1563 usercmd_t nullcmd; // for delta compression of qw moves
1564 void CL_SendMove(void)
1565 {
1566         int i, j, packetloss;
1567         int checksumindex;
1568         int bits;
1569         int maxusercmds;
1570         usercmd_t *cmd;
1571         sizebuf_t buf;
1572         unsigned char data[1024];
1573         double packettime;
1574         int msecdelta;
1575
1576         // if playing a demo, do nothing
1577         if (!cls.netcon)
1578                 return;
1579
1580         // we build up cl.movecmd[0] and then decide whether to send or not
1581         // the prediction code will use this command even though it has not been
1582         // sent yet
1583         cl.cmd.time = cl.time;
1584         cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
1585
1586         // set button bits
1587         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1588         bits = 0;
1589         if (in_attack.state   & 3) bits |=   1;
1590         if (in_jump.state     & 3) bits |=   2;
1591         if (in_button3.state  & 3) bits |=   4;
1592         if (in_button4.state  & 3) bits |=   8;
1593         if (in_button5.state  & 3) bits |=  16;
1594         if (in_button6.state  & 3) bits |=  32;
1595         if (in_button7.state  & 3) bits |=  64;
1596         if (in_button8.state  & 3) bits |= 128;
1597         if (in_use.state      & 3) bits |= 256;
1598         if (key_dest != key_game || key_consoleactive) bits |= 512;
1599         if (cl_prydoncursor.integer) bits |= 1024;
1600         if (in_button9.state  & 3)  bits |=   2048;
1601         if (in_button10.state  & 3) bits |=   4096;
1602         if (in_button11.state  & 3) bits |=   8192;
1603         if (in_button12.state  & 3) bits |=  16384;
1604         if (in_button13.state  & 3) bits |=  32768;
1605         if (in_button14.state  & 3) bits |=  65536;
1606         if (in_button15.state  & 3) bits |= 131072;
1607         if (in_button16.state  & 3) bits |= 262144;
1608         // button bits 19-31 unused currently
1609         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1610         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1611         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1612         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1613         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1614
1615         // set buttons and impulse
1616         cl.cmd.buttons = bits;
1617         cl.cmd.impulse = in_impulse;
1618
1619         // set viewangles
1620         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1621
1622         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[1].time * 1000));
1623         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1624         // ridiculous value rejection (matches qw)
1625         if (cl.cmd.msec > 250)
1626                 cl.cmd.msec = 100;
1627         cl.cmd.frametime = cl.cmd.msec * (1.0 / 1000.0);
1628
1629         cl.cmd.predicted = cl_movement.integer;
1630
1631         // movement is set by input code (forwardmove/sidemove/upmove)
1632         // always dump the first two moves, because they may contain leftover inputs from the last level
1633         if (cl.cmd.sequence <= 2)
1634                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1635
1636         cl.cmd.jump = (cl.cmd.buttons & 2) != 0;
1637         cl.cmd.crouch = 0;
1638         switch (cls.protocol)
1639         {
1640         case PROTOCOL_QUAKEWORLD:
1641         case PROTOCOL_QUAKE:
1642         case PROTOCOL_QUAKEDP:
1643         case PROTOCOL_NEHAHRAMOVIE:
1644         case PROTOCOL_NEHAHRABJP:
1645         case PROTOCOL_NEHAHRABJP2:
1646         case PROTOCOL_NEHAHRABJP3:
1647         case PROTOCOL_DARKPLACES1:
1648         case PROTOCOL_DARKPLACES2:
1649         case PROTOCOL_DARKPLACES3:
1650         case PROTOCOL_DARKPLACES4:
1651         case PROTOCOL_DARKPLACES5:
1652                 break;
1653         case PROTOCOL_DARKPLACES6:
1654         case PROTOCOL_DARKPLACES7:
1655                 // FIXME: cl.movecmd[0].buttons & 16 is +button5, Nexuiz specific
1656                 cl.cmd.crouch = (cl.cmd.buttons & 16) != 0;
1657                 break;
1658         case PROTOCOL_UNKNOWN:
1659                 break;
1660         }
1661
1662         cl.movecmd[0] = cl.cmd;
1663
1664         // don't predict more than 200fps
1665         if (realtime >= cl.lastpackettime + 0.005)
1666                 cl.movement_replay = true; // redo the prediction
1667
1668         // now decide whether to actually send this move
1669         // (otherwise it is only for prediction)
1670
1671         // don't send too often or else network connections can get clogged by a
1672         // high renderer framerate
1673         packettime = 1.0 / bound(1, cl_netfps.value, 1000);
1674         if (cl.movevars_timescale && cl.movevars_ticrate)
1675         {
1676                 float maxtic = cl.movevars_ticrate / cl.movevars_timescale;
1677                 packettime = min(packettime, maxtic);
1678         }
1679         // send input every frame in singleplayer
1680         if (cl.islocalgame)
1681                 packettime = 0;
1682
1683         // do not send if we do not have anything useful to send
1684         if(msecdelta <= 0 && cls.signon == SIGNONS && !cl.paused && cl.movevars_ticrate > 0)
1685                 return;
1686         // always send if buttons changed or an impulse is pending
1687         // even if it violates the rate limit!
1688         if (!cl.movecmd[0].impulse && (!cl_netimmediatebuttons.integer || cl.movecmd[0].buttons == cl.movecmd[1].buttons))
1689         {
1690                 // don't choke the connection with packets (obey rate limit)
1691                 if ((cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS) && !NetConn_CanSend(cls.netcon) && !cl.islocalgame)
1692                         return;
1693                 // don't send too often (cl_netfps)
1694                 if (realtime < cl.lastpackettime + packettime)
1695                         return;
1696         }
1697         // try to round off the lastpackettime to a multiple of the packet interval
1698         // (this causes it to emit packets at a steady beat)
1699         if (packettime > 0)
1700                 cl.lastpackettime = floor(realtime / packettime) * packettime;
1701         else
1702                 cl.lastpackettime = realtime;
1703
1704         buf.maxsize = sizeof(data);
1705         buf.cursize = 0;
1706         buf.data = data;
1707
1708         // send the movement message
1709         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1710         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1711         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1712         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1713         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1714         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1715         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1716         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1717         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1718         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1719         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1720
1721         // set prydon cursor info
1722         CL_UpdatePrydonCursor();
1723
1724         if (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS)
1725         {
1726                 switch (cls.protocol)
1727                 {
1728                 case PROTOCOL_QUAKEWORLD:
1729                         MSG_WriteByte(&buf, qw_clc_move);
1730                         // save the position for a checksum byte
1731                         checksumindex = buf.cursize;
1732                         MSG_WriteByte(&buf, 0);
1733                         // packet loss percentage
1734                         for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1735                                 if (cls.netcon->incoming_unreliablesize[j] == NETGRAPH_LOSTPACKET)
1736                                         packetloss++;
1737                         packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1738                         MSG_WriteByte(&buf, packetloss);
1739                         // write most recent 3 moves
1740                         QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1741                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1742                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.movecmd[0]);
1743                         // calculate the checksum
1744                         buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
1745                         // if delta compression history overflows, request no delta
1746                         if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1747                                 cl.qw_validsequence = 0;
1748                         // request delta compression if appropriate
1749                         if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1750                         {
1751                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1752                                 MSG_WriteByte(&buf, qw_clc_delta);
1753                                 MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1754                         }
1755                         else
1756                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
1757                         break;
1758                 case PROTOCOL_QUAKE:
1759                 case PROTOCOL_QUAKEDP:
1760                 case PROTOCOL_NEHAHRAMOVIE:
1761                 case PROTOCOL_NEHAHRABJP:
1762                 case PROTOCOL_NEHAHRABJP2:
1763                 case PROTOCOL_NEHAHRABJP3:
1764                         // 5 bytes
1765                         MSG_WriteByte (&buf, clc_move);
1766                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1767                         // 3 bytes
1768                         for (i = 0;i < 3;i++)
1769                                 MSG_WriteAngle8i (&buf, cl.movecmd[0].viewangles[i]);
1770                         // 6 bytes
1771                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1772                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1773                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1774                         // 2 bytes
1775                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1776                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1777                         break;
1778                 case PROTOCOL_DARKPLACES2:
1779                 case PROTOCOL_DARKPLACES3:
1780                         // 5 bytes
1781                         MSG_WriteByte (&buf, clc_move);
1782                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1783                         // 12 bytes
1784                         for (i = 0;i < 3;i++)
1785                                 MSG_WriteAngle32f (&buf, cl.movecmd[0].viewangles[i]);
1786                         // 6 bytes
1787                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1788                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1789                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1790                         // 2 bytes
1791                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1792                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1793                         break;
1794                 case PROTOCOL_DARKPLACES1:
1795                 case PROTOCOL_DARKPLACES4:
1796                 case PROTOCOL_DARKPLACES5:
1797                         // 5 bytes
1798                         MSG_WriteByte (&buf, clc_move);
1799                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1800                         // 6 bytes
1801                         for (i = 0;i < 3;i++)
1802                                 MSG_WriteAngle16i (&buf, cl.movecmd[0].viewangles[i]);
1803                         // 6 bytes
1804                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1805                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1806                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1807                         // 2 bytes
1808                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1809                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1810                 case PROTOCOL_DARKPLACES6:
1811                 case PROTOCOL_DARKPLACES7:
1812                         // set the maxusercmds variable to limit how many should be sent
1813                         maxusercmds = bound(1, cl_netrepeatinput.integer + 1, min(3, CL_MAX_USERCMDS));
1814                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1815                         if (!cl.cmd.predicted)
1816                                 maxusercmds = 1;
1817
1818                         // send the latest moves in order, the old ones will be
1819                         // ignored by the server harmlessly, however if the previous
1820                         // packets were lost these moves will be used
1821                         //
1822                         // this reduces packet loss impact on gameplay.
1823                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1824                         {
1825                                 // don't repeat any stale moves
1826                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1827                                         continue;
1828                                 // 5/9 bytes
1829                                 MSG_WriteByte (&buf, clc_move);
1830                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1831                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1832                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1833                                 // 6 bytes
1834                                 for (i = 0;i < 3;i++)
1835                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1836                                 // 6 bytes
1837                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1838                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1839                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1840                                 // 5 bytes
1841                                 MSG_WriteLong (&buf, cmd->buttons);
1842                                 MSG_WriteByte (&buf, cmd->impulse);
1843                                 // PRYDON_CLIENTCURSOR
1844                                 // 30 bytes
1845                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1846                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1847                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1848                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1849                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1850                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1851                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1852                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1853                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1854                         }
1855                         break;
1856                 case PROTOCOL_UNKNOWN:
1857                         break;
1858                 }
1859         }
1860
1861         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
1862         {
1863                 // ack the last few frame numbers
1864                 // (redundent to improve handling of client->server packet loss)
1865                 // for LATESTFRAMENUMS == 3 case this is 15 bytes
1866                 for (i = 0;i < LATESTFRAMENUMS;i++)
1867                 {
1868                         if (cl.latestframenums[i] > 0)
1869                         {
1870                                 if (developer_networkentities.integer >= 10)
1871                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
1872                                 MSG_WriteByte(&buf, clc_ackframe);
1873                                 MSG_WriteLong(&buf, cl.latestframenums[i]);
1874                         }
1875                 }
1876         }
1877
1878         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1879         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1880
1881         // acknowledge any recently received data blocks
1882         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
1883         {
1884                 MSG_WriteByte(&buf, clc_ackdownloaddata);
1885                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
1886                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
1887                 cls.dp_downloadack[i].start = 0;
1888                 cls.dp_downloadack[i].size = 0;
1889         }
1890
1891         // send the reliable message (forwarded commands) if there is one
1892         if (buf.cursize || cls.netcon->message.cursize)
1893                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
1894
1895         // update the cl.movecmd array which holds the most recent moves,
1896         // because we now need a new slot for the next input
1897         for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
1898                 cl.movecmd[i] = cl.movecmd[i-1];
1899         cl.movecmd[0].msec = 0;
1900         cl.movecmd[0].frametime = 0;
1901
1902         // clear button 'click' states
1903         in_attack.state  &= ~2;
1904         in_jump.state    &= ~2;
1905         in_button3.state &= ~2;
1906         in_button4.state &= ~2;
1907         in_button5.state &= ~2;
1908         in_button6.state &= ~2;
1909         in_button7.state &= ~2;
1910         in_button8.state &= ~2;
1911         in_use.state     &= ~2;
1912         in_button9.state  &= ~2;
1913         in_button10.state &= ~2;
1914         in_button11.state &= ~2;
1915         in_button12.state &= ~2;
1916         in_button13.state &= ~2;
1917         in_button14.state &= ~2;
1918         in_button15.state &= ~2;
1919         in_button16.state &= ~2;
1920         // clear impulse
1921         in_impulse = 0;
1922
1923         if (cls.netcon->message.overflowed)
1924         {
1925                 Con_Print("CL_SendMove: lost server connection\n");
1926                 CL_Disconnect();
1927                 Host_ShutdownServer();
1928         }
1929 }
1930
1931 /*
1932 ============
1933 CL_InitInput
1934 ============
1935 */
1936 void CL_InitInput (void)
1937 {
1938         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
1939         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
1940         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
1941         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
1942         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
1943         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
1944         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
1945         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
1946         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
1947         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
1948         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
1949         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
1950         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
1951         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
1952         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
1953         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
1954         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
1955         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
1956         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
1957         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
1958         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
1959         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
1960         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
1961         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
1962         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
1963         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
1964         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
1965         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
1966         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
1967         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
1968         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
1969         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
1970         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
1971
1972         // LordHavoc: added use button
1973         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
1974         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
1975
1976         // LordHavoc: added 6 new buttons
1977         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
1978         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
1979         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
1980         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
1981         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
1982         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
1983         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
1984         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
1985         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
1986         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
1987         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
1988         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
1989         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
1990         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
1991         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
1992         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
1993         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
1994         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
1995         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
1996         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
1997         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
1998         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
1999         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
2000         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
2001         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
2002         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
2003         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
2004         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
2005
2006         // LordHavoc: added bestweapon command
2007         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
2008 #if 0
2009         Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
2010 #endif
2011         Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
2012
2013         Cvar_RegisterVariable(&cl_movecliptokeyboard);
2014         Cvar_RegisterVariable(&cl_movement);
2015         Cvar_RegisterVariable(&cl_movement_minping);
2016         Cvar_RegisterVariable(&cl_movement_track_canjump);
2017         Cvar_RegisterVariable(&cl_movement_maxspeed);
2018         Cvar_RegisterVariable(&cl_movement_maxairspeed);
2019         Cvar_RegisterVariable(&cl_movement_stopspeed);
2020         Cvar_RegisterVariable(&cl_movement_friction);
2021         Cvar_RegisterVariable(&cl_movement_wallfriction);
2022         Cvar_RegisterVariable(&cl_movement_waterfriction);
2023         Cvar_RegisterVariable(&cl_movement_edgefriction);
2024         Cvar_RegisterVariable(&cl_movement_stepheight);
2025         Cvar_RegisterVariable(&cl_movement_accelerate);
2026         Cvar_RegisterVariable(&cl_movement_airaccelerate);
2027         Cvar_RegisterVariable(&cl_movement_wateraccelerate);
2028         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
2029         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
2030         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
2031
2032         Cvar_RegisterVariable(&in_pitch_min);
2033         Cvar_RegisterVariable(&in_pitch_max);
2034         Cvar_RegisterVariable(&m_filter);
2035         Cvar_RegisterVariable(&m_accelerate);
2036         Cvar_RegisterVariable(&m_accelerate_minspeed);
2037         Cvar_RegisterVariable(&m_accelerate_maxspeed);
2038         Cvar_RegisterVariable(&m_accelerate_filter);
2039
2040         Cvar_RegisterVariable(&cl_netfps);
2041         Cvar_RegisterVariable(&cl_netrepeatinput);
2042         Cvar_RegisterVariable(&cl_netimmediatebuttons);
2043
2044         Cvar_RegisterVariable(&cl_nodelta);
2045 }
2046