cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 int in_bestweapon_info[][5] =
 201 {
 202         {'1', 1, IT_AXE, STAT_SHELLS, 0},
 203         {'2', 2, IT_SHOTGUN, STAT_SHELLS, 1},
 204         {'3', 3, IT_SUPER_SHOTGUN, STAT_SHELLS, 1},
 205         {'4', 4, IT_NAILGUN, STAT_NAILS, 1},
 206         {'5', 5, IT_SUPER_NAILGUN, STAT_NAILS, 1},
 207         {'6', 6, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1},
 208         {'7', 7, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1},
 209         {'8', 8, IT_LIGHTNING, STAT_CELLS, 1},
 210         {'9', 9, 128, STAT_CELLS, 1}, // generic energy weapon for mods
 211         {'p', 209, 128, STAT_CELLS, 1}, // dpmod plasma gun
 212         {'w', 210, 8388608, STAT_CELLS, 1}, // dpmod plasma wave cannon
 213         {'l', 225, HIT_LASER_CANNON, STAT_CELLS, 1}, // hipnotic laser cannon
 214         {'h', 226, HIT_MJOLNIR, STAT_CELLS, 0}, // hipnotic mjolnir hammer
 215         {-1, 0, 0, 0, 0}
 216 };
 217 void IN_BestWeapon (void)
 218 {
 219         int i, n;
 220         const char *s;
 221         if (Cmd_Argc() != 2)
 222         {
 223                 Con_Printf("bestweapon requires 1 parameter\n");
 224                 return;
 225         }
 226         s = Cmd_Argv(1);
 227         for (i = 0;s[i];i++)
 228         {
 229                 // figure out which weapon this character refers to
 230                 for (n = 0;in_bestweapon_info[n][0] >= 0;n++)
 231                 {
 232                         if (in_bestweapon_info[n][0] == s[i])
 233                         {
 234                                 // we found out what weapon this character refers to
 235                                 // check if the inventory contains the weapon and enough ammo
 236                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n][2]) && (cl.stats[in_bestweapon_info[n][3]] >= in_bestweapon_info[n][4]))
 237                                 {
 238                                         // we found one of the weapons the player wanted
 239                                         // send an impulse to switch to it
 240                                         in_impulse = in_bestweapon_info[n][1];
 241                                         return;
 242                                 }
 243                                 break;
 244                         }
 245                 }
 246                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 247         }
 248         // if we couldn't find any of the weapons, there's nothing more we can do...
 249 }
 250
 251 /*
 252 ===============
 253 CL_KeyState
 254
 255 Returns 0.25 if a key was pressed and released during the frame,
 256 0.5 if it was pressed and held
 257 0 if held then released, and
 258 1.0 if held for the entire time
 259 ===============
 260 */
 261 float CL_KeyState (kbutton_t *key)
 262 {
 263         float           val;
 264         qboolean        impulsedown, impulseup, down;
 265
 266         impulsedown = key->state & 2;
 267         impulseup = key->state & 4;
 268         down = key->state & 1;
 269         val = 0;
 270
 271         if (impulsedown && !impulseup)
 272         {
 273                 if (down)
 274                         val = 0.5;      // pressed and held this frame
 275                 else
 276                         val = 0;        //      I_Error ();
 277         }
 278         if (impulseup && !impulsedown)
 279         {
 280                 if (down)
 281                         val = 0;        //      I_Error ();
 282                 else
 283                         val = 0;        // released this frame
 284         }
 285         if (!impulsedown && !impulseup)
 286         {
 287                 if (down)
 288                         val = 1.0;      // held the entire frame
 289                 else
 290                         val = 0;        // up the entire frame
 291         }
 292         if (impulsedown && impulseup)
 293         {
 294                 if (down)
 295                         val = 0.75;     // released and re-pressed this frame
 296                 else
 297                         val = 0.25;     // pressed and released this frame
 298         }
 299
 300         key->state &= 1;                // clear impulses
 301
 302         return val;
 303 }
 304
 305
 306
 307
 308 //==========================================================================
 309
 310 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 311 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 312 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 313 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 314
 315 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 316
 317 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 318 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 319
 320 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 321
 322 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 323 cvar_t cl_movement_latency = {0, "cl_movement_latency", "0", "compensates for this much latency (ping time) on quake servers which do not really support prediction, no effect on darkplaces7 protocol servers"};
 324 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 325 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 326 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 327 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 328 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_friction), if less than 0 the cl_movement_friction variable is used instead"};
 329 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "2", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 330 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 331 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 332 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 333 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 334 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 335 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (should match sv_airaccel_qw)"};
 336 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction)"};
 337 cvar_t cl_gravity = {0, "cl_gravity", "800", "how much gravity to apply in client physics (should match sv_gravity)"};
 338 cvar_t cl_slowmo = {0, "cl_slowmo", "1", "speed of game time (should match slowmo)"};
 339
 340 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"}; // quake used -70
 341 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"}; // quake used 80
 342
 343 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 344
 345 cvar_t cl_netinputpacketspersecond = {CVAR_SAVE, "cl_netinputpacketspersecond","50", "how many input packets to send to server each second"};
 346
 347 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 348
 349
 350 /*
 351 ================
 352 CL_AdjustAngles
 353
 354 Moves the local angle positions
 355 ================
 356 */
 357 void CL_AdjustAngles (void)
 358 {
 359         float   speed;
 360         float   up, down;
 361
 362         if (in_speed.state & 1)
 363                 speed = cl.realframetime * cl_anglespeedkey.value;
 364         else
 365                 speed = cl.realframetime;
 366
 367         if (!(in_strafe.state & 1))
 368         {
 369                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 370                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 371         }
 372         if (in_klook.state & 1)
 373         {
 374                 V_StopPitchDrift ();
 375                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 376                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 377         }
 378
 379         up = CL_KeyState (&in_lookup);
 380         down = CL_KeyState(&in_lookdown);
 381
 382         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 383         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 384
 385         if (up || down)
 386                 V_StopPitchDrift ();
 387
 388         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 389         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
 390         cl.viewangles[ROLL] = ANGLEMOD(cl.viewangles[ROLL]);
 391         if (cl.viewangles[YAW] >= 180)
 392                 cl.viewangles[YAW] -= 360;
 393         if (cl.viewangles[PITCH] >= 180)
 394                 cl.viewangles[PITCH] -= 360;
 395         if (cl.viewangles[ROLL] >= 180)
 396                 cl.viewangles[ROLL] -= 360;
 397
 398         cl.viewangles[PITCH] = bound (in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 399         cl.viewangles[ROLL] = bound(-50, cl.viewangles[ROLL], 50);
 400 }
 401
 402 qboolean cl_ignoremousemove = false;
 403
 404 /*
 405 ================
 406 CL_Move
 407
 408 Send the intended movement message to the server
 409 ================
 410 */
 411 void CL_Move (void)
 412 {
 413         float mx, my;
 414         static float old_mouse_x = 0, old_mouse_y = 0;
 415
 416         // clamp before the move to prevent starting with bad angles
 417         CL_AdjustAngles ();
 418
 419         // reset some of the command fields
 420         cl.cmd.forwardmove = 0;
 421         cl.cmd.sidemove = 0;
 422         cl.cmd.upmove = 0;
 423
 424         // get basic movement from keyboard
 425         if (in_strafe.state & 1)
 426         {
 427                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 428                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 429         }
 430
 431         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 432         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 433
 434         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 435         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 436
 437         if (! (in_klook.state & 1) )
 438         {
 439                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 440                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 441         }
 442
 443         // adjust for speed key
 444         if (in_speed.state & 1)
 445         {
 446                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 447                 cl.cmd.sidemove *= cl_movespeedkey.value;
 448                 cl.cmd.upmove *= cl_movespeedkey.value;
 449         }
 450
 451         in_mouse_x = 0;
 452         in_mouse_y = 0;
 453
 454         // allow mice or other external controllers to add to the move
 455         IN_Move ();
 456
 457         // ignore a mouse move if mouse was activated/deactivated this frame
 458         if (cl_ignoremousemove)
 459         {
 460                 cl_ignoremousemove = false;
 461                 in_mouse_x = 0;
 462                 in_mouse_y = 0;
 463         }
 464
 465         // apply m_filter if it is on
 466         mx = in_mouse_x;
 467         my = in_mouse_y;
 468         if (m_filter.integer)
 469         {
 470                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 471                 in_mouse_y = (my + old_mouse_y) * 0.5;
 472         }
 473         old_mouse_x = mx;
 474         old_mouse_y = my;
 475
 476         // if not in menu, apply mouse move to viewangles/movement
 477         if (!cl.csqc_wantsmousemove && in_client_mouse)
 478         {
 479                 if (cl_prydoncursor.integer)
 480                 {
 481                         // mouse interacting with the scene, mostly stationary view
 482                         V_StopPitchDrift();
 483                         cl.cmd.cursor_screen[0] += in_mouse_x * sensitivity.value / vid.width;
 484                         cl.cmd.cursor_screen[1] += in_mouse_y * sensitivity.value / vid.height;
 485                 }
 486                 else if (in_strafe.state & 1)
 487                 {
 488                         // strafing mode, all looking is movement
 489                         V_StopPitchDrift();
 490                         cl.cmd.sidemove += m_side.value * in_mouse_x * sensitivity.value;
 491                         if (noclip_anglehack)
 492                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * sensitivity.value;
 493                         else
 494                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * sensitivity.value;
 495                 }
 496                 else if ((in_mlook.state & 1) || freelook.integer)
 497                 {
 498                         // mouselook, lookstrafe causes turning to become strafing
 499                         V_StopPitchDrift();
 500                         if (lookstrafe.integer)
 501                                 cl.cmd.sidemove += m_side.value * in_mouse_x * sensitivity.value;
 502                         else
 503                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * sensitivity.value * cl.viewzoom;
 504                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * sensitivity.value * cl.viewzoom;
 505                 }
 506                 else
 507                 {
 508                         // non-mouselook, yaw turning and forward/back movement
 509                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * sensitivity.value * cl.viewzoom;
 510                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * sensitivity.value;
 511                 }
 512         }
 513
 514         // clamp after the move to prevent rendering with bad angles
 515         CL_AdjustAngles ();
 516 }
 517
 518 #include "cl_collision.h"
 519
 520 extern void V_CalcRefdef(void);
 521 void CL_UpdatePrydonCursor(void)
 522 {
 523         vec3_t temp, scale;
 524
 525         if (!cl_prydoncursor.integer)
 526                 VectorClear(cl.cmd.cursor_screen);
 527
 528         /*
 529         if (cl.cmd.cursor_screen[0] < -1)
 530         {
 531                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 532                 cl.cmd.cursor_screen[0] = -1;
 533         }
 534         if (cl.cmd.cursor_screen[0] > 1)
 535         {
 536                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 537                 cl.cmd.cursor_screen[0] = 1;
 538         }
 539         if (cl.cmd.cursor_screen[1] < -1)
 540         {
 541                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 542                 cl.cmd.cursor_screen[1] = -1;
 543         }
 544         if (cl.cmd.cursor_screen[1] > 1)
 545         {
 546                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 547                 cl.cmd.cursor_screen[1] = 1;
 548         }
 549         */
 550         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 551         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 552         cl.cmd.cursor_screen[2] = 1;
 553
 554         scale[0] = -r_view.frustum_x;
 555         scale[1] = -r_view.frustum_y;
 556         scale[2] = 1;
 557
 558         // trace distance
 559         VectorScale(scale, 1000000, scale);
 560
 561         // calculate current view matrix
 562         //V_CalcRefdef();
 563         VectorClear(temp);
 564         Matrix4x4_Transform(&r_view.matrix, temp, cl.cmd.cursor_start);
 565         VectorSet(temp, cl.cmd.cursor_screen[2] * scale[2], cl.cmd.cursor_screen[0] * scale[0], cl.cmd.cursor_screen[1] * scale[1]);
 566         Matrix4x4_Transform(&r_view.matrix, temp, cl.cmd.cursor_end);
 567         // trace from view origin to the cursor
 568         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL, false);
 569 }
 570
 571 void CL_ClientMovement_InputQW(qw_usercmd_t *cmd)
 572 {
 573         int i;
 574         int n;
 575         // remove stale queue items
 576         n = cl.movement_numqueue;
 577         cl.movement_numqueue = 0;
 578         for (i = 0;i < n;i++)
 579         {
 580                 if (cl.movement_queue[i].sequence > cls.netcon->qw.incoming_sequence)
 581                         cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
 582                 else if (i == 0)
 583                         cl.movement_replay_canjump = !cl.movement_queue[i].jump; // FIXME: this logic is quite broken
 584         }
 585         // add to input queue if there is room
 586         if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])))
 587         {
 588                 // add to input queue
 589                 cl.movement_queue[cl.movement_numqueue].sequence = cls.netcon->qw.outgoing_sequence;
 590                 cl.movement_queue[cl.movement_numqueue].time = realtime;
 591                 cl.movement_queue[cl.movement_numqueue].frametime = cmd->msec / 1000.0;
 592                 VectorCopy(cmd->angles, cl.movement_queue[cl.movement_numqueue].viewangles);
 593                 cl.movement_queue[cl.movement_numqueue].move[0] = cmd->forwardmove;
 594                 cl.movement_queue[cl.movement_numqueue].move[1] = cmd->sidemove;
 595                 cl.movement_queue[cl.movement_numqueue].move[2] = cmd->upmove;
 596                 cl.movement_queue[cl.movement_numqueue].jump = (cmd->buttons & 2) != 0;
 597                 cl.movement_queue[cl.movement_numqueue].crouch = false;
 598                 cl.movement_numqueue++;
 599         }
 600         cl.movement_replay = true;
 601 }
 602
 603 void CL_ClientMovement_Input(qboolean buttonjump, qboolean buttoncrouch)
 604 {
 605         int i;
 606         int n;
 607         double lasttime = (cls.protocol == PROTOCOL_DARKPLACES6 || cls.protocol == PROTOCOL_DARKPLACES7) ? cl.mtime[1] : (cl.movement_numqueue >= 0 ? cl.movement_queue[cl.movement_numqueue - 1].time : 0);
 608         // remove stale queue items
 609         n = cl.movement_numqueue;
 610         cl.movement_numqueue = 0;
 611         if (cl.servermovesequence)
 612         {
 613                 for (i = 0;i < n;i++)
 614                 {
 615                         if (cl.movement_queue[i].sequence > cl.servermovesequence)
 616                                 cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
 617                         else if (i == 0)
 618                                 cl.movement_replay_canjump = !cl.movement_queue[i].jump; // FIXME: this logic is quite broken
 619                 }
 620         }
 621         else
 622         {
 623                 for (i = 0;i < n;i++)
 624                 {
 625                         if (cl.movement_queue[i].time >= cl.mtime[0] - cl_movement_latency.value / 1000.0 && cl.movement_queue[i].time <= cl.mtime[0])
 626                                 cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
 627                         else if (i == 0)
 628                                 cl.movement_replay_canjump = !cl.movement_queue[i].jump; // FIXME: this logic is quite broken
 629                 }
 630         }
 631         // add to input queue if there is room
 632         if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])) && cl.mtime[0] > cl.mtime[1])
 633         {
 634                 // add to input queue
 635                 cl.movement_queue[cl.movement_numqueue].sequence = cl.movesequence;
 636                 cl.movement_queue[cl.movement_numqueue].time = cl.mtime[0];
 637                 cl.movement_queue[cl.movement_numqueue].frametime = bound(0, cl.mtime[0] - lasttime, 0.1);
 638                 VectorCopy(cl.viewangles, cl.movement_queue[cl.movement_numqueue].viewangles);
 639                 cl.movement_queue[cl.movement_numqueue].move[0] = cl.cmd.forwardmove;
 640                 cl.movement_queue[cl.movement_numqueue].move[1] = cl.cmd.sidemove;
 641                 cl.movement_queue[cl.movement_numqueue].move[2] = cl.cmd.upmove;
 642                 cl.movement_queue[cl.movement_numqueue].jump = buttonjump;
 643                 cl.movement_queue[cl.movement_numqueue].crouch = buttoncrouch;
 644                 cl.movement_numqueue++;
 645         }
 646         cl.movement_replay = true;
 647 }
 648
 649 typedef enum waterlevel_e
 650 {
 651         WATERLEVEL_NONE,
 652         WATERLEVEL_WETFEET,
 653         WATERLEVEL_SWIMMING,
 654         WATERLEVEL_SUBMERGED
 655 }
 656 waterlevel_t;
 657
 658 typedef struct cl_clientmovement_state_s
 659 {
 660         // position
 661         vec3_t origin;
 662         vec3_t velocity;
 663         // current bounding box (different if crouched vs standing)
 664         vec3_t mins;
 665         vec3_t maxs;
 666         // currently on the ground
 667         qboolean onground;
 668         // currently crouching
 669         qboolean crouched;
 670         // whether jump button has been released since last jump
 671         qboolean canjump;
 672         // what kind of water (SUPERCONTENTS_LAVA for instance)
 673         int watertype;
 674         // how deep
 675         waterlevel_t waterlevel;
 676         // weird hacks when jumping out of water
 677         // (this is in seconds and counts down to 0)
 678         float waterjumptime;
 679
 680         // movement parameters for physics code
 681         float movevars_gravity;
 682         float movevars_stopspeed;
 683         float movevars_maxspeed;
 684         float movevars_spectatormaxspeed;
 685         float movevars_accelerate;
 686         float movevars_airaccelerate;
 687         float movevars_wateraccelerate;
 688         float movevars_friction;
 689         float movevars_waterfriction;
 690         float movevars_entgravity;
 691         float movevars_jumpvelocity;
 692         float movevars_edgefriction;
 693         float movevars_maxairspeed;
 694         float movevars_stepheight;
 695         float movevars_airaccel_qw;
 696         float movevars_airaccel_sideways_friction;
 697
 698         // user command
 699         client_movementqueue_t q;
 700 }
 701 cl_clientmovement_state_t;
 702
 703 #define NUMOFFSETS 27
 704 static vec3_t offsets[NUMOFFSETS] =
 705 {
 706 // 1 no nudge (just return the original if this test passes)
 707         { 0.000,  0.000,  0.000},
 708 // 6 simple nudges
 709         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 710         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 711         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 712 // 4 diagonal flat nudges
 713         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 714         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 715 // 8 diagonal upward nudges
 716         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 717         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 718         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 719         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 720 // 8 diagonal downward nudges
 721         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 722         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 723         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 724         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 725 };
 726
 727 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 728 {
 729         int i;
 730         vec3_t neworigin;
 731         for (i = 0;i < NUMOFFSETS;i++)
 732         {
 733                 VectorAdd(offsets[i], s->origin, neworigin);
 734                 if (!CL_TraceBox(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true).startsolid)
 735                 {
 736                         VectorCopy(neworigin, s->origin);
 737                         return true;
 738                 }
 739         }
 740         // if all offsets failed, give up
 741         return false;
 742 }
 743
 744 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 745 {
 746         vec3_t origin1, origin2;
 747         trace_t trace;
 748
 749         // make sure player is not stuck
 750         CL_ClientMovement_Unstick(s);
 751
 752         // set crouched
 753         if (s->q.crouch)
 754         {
 755                 // wants to crouch, this always works..
 756                 if (!s->crouched)
 757                         s->crouched = true;
 758         }
 759         else
 760         {
 761                 // wants to stand, if currently crouching we need to check for a
 762                 // low ceiling first
 763                 if (s->crouched)
 764                 {
 765                         trace = CL_TraceBox(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
 766                         if (!trace.startsolid)
 767                                 s->crouched = false;
 768                 }
 769         }
 770         if (s->crouched)
 771         {
 772                 VectorCopy(cl.playercrouchmins, s->mins);
 773                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 774         }
 775         else
 776         {
 777                 VectorCopy(cl.playerstandmins, s->mins);
 778                 VectorCopy(cl.playerstandmaxs, s->maxs);
 779         }
 780
 781         // set onground
 782         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 783         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 2);
 784         trace = CL_TraceBox(origin1, s->mins, s->maxs, origin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
 785         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 786
 787         // set watertype/waterlevel
 788         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 789         s->waterlevel = WATERLEVEL_NONE;
 790         s->watertype = CL_TraceBox(origin1, vec3_origin, vec3_origin, origin1, true, NULL, 0, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 791         if (s->watertype)
 792         {
 793                 s->waterlevel = WATERLEVEL_WETFEET;
 794                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 795                 if (CL_TraceBox(origin1, vec3_origin, vec3_origin, origin1, true, NULL, 0, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 796                 {
 797                         s->waterlevel = WATERLEVEL_SWIMMING;
 798                         origin1[2] = s->origin[2] + 22;
 799                         if (CL_TraceBox(origin1, vec3_origin, vec3_origin, origin1, true, NULL, 0, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 800                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 801                 }
 802         }
 803
 804         // water jump prediction
 805         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 806                 s->waterjumptime = 0;
 807 }
 808
 809 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 810 {
 811         int bump;
 812         double t;
 813         vec_t f;
 814         vec3_t neworigin;
 815         vec3_t currentorigin2;
 816         vec3_t neworigin2;
 817         vec3_t primalvelocity;
 818         trace_t trace;
 819         trace_t trace2;
 820         trace_t trace3;
 821         CL_ClientMovement_UpdateStatus(s);
 822         VectorCopy(s->velocity, primalvelocity);
 823         for (bump = 0, t = s->q.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 824         {
 825                 VectorMA(s->origin, t, s->velocity, neworigin);
 826                 trace = CL_TraceBox(s->origin, s->mins, s->maxs, neworigin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
 827                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 828                 {
 829                         // may be a step or wall, try stepping up
 830                         // first move forward at a higher level
 831                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + s->movevars_stepheight);
 832                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + s->movevars_stepheight);
 833                         trace2 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
 834                         if (!trace2.startsolid)
 835                         {
 836                                 // then move down from there
 837                                 VectorCopy(trace2.endpos, currentorigin2);
 838                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 839                                 trace3 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
 840                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 841                                 // accept the new trace if it made some progress
 842                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 843                                 {
 844                                         trace = trace2;
 845                                         VectorCopy(trace3.endpos, trace.endpos);
 846                                 }
 847                         }
 848                 }
 849
 850                 // check if it moved at all
 851                 if (trace.fraction >= 0.001)
 852                         VectorCopy(trace.endpos, s->origin);
 853
 854                 // check if it moved all the way
 855                 if (trace.fraction == 1)
 856                         break;
 857
 858                 //if (trace.plane.normal[2] > 0.7)
 859                 //      s->onground = true;
 860
 861                 t -= t * trace.fraction;
 862
 863                 f = DotProduct(s->velocity, trace.plane.normal);
 864                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 865         }
 866         if (s->waterjumptime > 0)
 867                 VectorCopy(primalvelocity, s->velocity);
 868 }
 869
 870
 871 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 872 {
 873         vec_t wishspeed;
 874         vec_t f;
 875         vec3_t wishvel;
 876         vec3_t wishdir;
 877
 878         // water jump only in certain situations
 879         // this mimics quakeworld code
 880         if (s->q.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
 881         {
 882                 vec3_t forward;
 883                 vec3_t yawangles;
 884                 vec3_t spot;
 885                 VectorSet(yawangles, 0, s->q.viewangles[1], 0);
 886                 AngleVectors(yawangles, forward, NULL, NULL);
 887                 VectorMA(s->origin, 24, forward, spot);
 888                 spot[2] += 8;
 889                 if (CL_TraceBox(spot, vec3_origin, vec3_origin, spot, true, NULL, 0, false).startsolid)
 890                 {
 891                         spot[2] += 24;
 892                         if (!CL_TraceBox(spot, vec3_origin, vec3_origin, spot, true, NULL, 0, false).startsolid)
 893                         {
 894                                 VectorScale(forward, 50, s->velocity);
 895                                 s->velocity[2] = 310;
 896                                 s->waterjumptime = 2;
 897                                 s->onground = false;
 898                                 s->canjump = false;
 899                         }
 900                 }
 901         }
 902
 903         if (!VectorLength2(s->q.move))
 904         {
 905                 // drift towards bottom
 906                 VectorSet(wishvel, 0, 0, -60);
 907         }
 908         else
 909         {
 910                 // swim
 911                 vec3_t forward;
 912                 vec3_t right;
 913                 vec3_t up;
 914                 // calculate movement vector
 915                 AngleVectors(s->q.viewangles, forward, right, up);
 916                 VectorSet(up, 0, 0, 1);
 917                 VectorMAMAM(s->q.move[0], forward, s->q.move[1], right, s->q.move[2], up, wishvel);
 918         }
 919
 920         // split wishvel into wishspeed and wishdir
 921         wishspeed = VectorLength(wishvel);
 922         if (wishspeed)
 923                 VectorScale(wishvel, 1 / wishspeed, wishdir);
 924         else
 925                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
 926         wishspeed = min(wishspeed, s->movevars_maxspeed) * 0.7;
 927
 928         if (s->crouched)
 929                 wishspeed *= 0.5;
 930
 931         if (s->waterjumptime <= 0)
 932         {
 933                 // water friction
 934                 f = 1 - s->q.frametime * s->movevars_waterfriction * s->waterlevel;
 935                 f = bound(0, f, 1);
 936                 VectorScale(s->velocity, f, s->velocity);
 937
 938                 // water acceleration
 939                 f = wishspeed - DotProduct(s->velocity, wishdir);
 940                 if (f > 0)
 941                 {
 942                         f = min(s->movevars_wateraccelerate * s->q.frametime * wishspeed, f);
 943                         VectorMA(s->velocity, f, wishdir, s->velocity);
 944                 }
 945
 946                 // holding jump button swims upward slowly
 947                 if (s->q.jump)
 948                 {
 949                         if (s->watertype & SUPERCONTENTS_LAVA)
 950                                 s->velocity[2] =  50;
 951                         else if (s->watertype & SUPERCONTENTS_SLIME)
 952                                 s->velocity[2] =  80;
 953                         else
 954                         {
 955                                 if (gamemode == GAME_NEXUIZ)
 956                                         s->velocity[2] = 200;
 957                                 else
 958                                         s->velocity[2] = 100;
 959                         }
 960                 }
 961         }
 962
 963         CL_ClientMovement_Move(s);
 964 }
 965
 966 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
 967 {
 968         vec_t friction;
 969         vec_t wishspeed;
 970         vec_t addspeed;
 971         vec_t accelspeed;
 972         vec_t f;
 973         vec3_t forward;
 974         vec3_t right;
 975         vec3_t up;
 976         vec3_t wishvel;
 977         vec3_t wishdir;
 978         vec3_t yawangles;
 979         trace_t trace;
 980
 981         // jump if on ground with jump button pressed but only if it has been
 982         // released at least once since the last jump
 983         if (s->q.jump && s->onground)// && s->canjump) // FIXME: canjump doesn't work properly
 984         {
 985                 s->velocity[2] += s->movevars_jumpvelocity;
 986                 s->onground = false;
 987                 s->canjump = false;
 988         }
 989
 990         // calculate movement vector
 991         VectorSet(yawangles, 0, s->q.viewangles[1], 0);
 992         AngleVectors(yawangles, forward, right, up);
 993         VectorMAM(s->q.move[0], forward, s->q.move[1], right, wishvel);
 994
 995         // split wishvel into wishspeed and wishdir
 996         wishspeed = VectorLength(wishvel);
 997         if (wishspeed)
 998                 VectorScale(wishvel, 1 / wishspeed, wishdir);
 999         else
1000                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1001         wishspeed = min(wishspeed, s->movevars_maxspeed);
1002         if (s->crouched)
1003                 wishspeed *= 0.5;
1004
1005         // check if onground
1006         if (s->onground)
1007         {
1008                 // apply edge friction
1009                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1010                 friction = s->movevars_friction;
1011                 if (f > 0 && s->movevars_edgefriction != 1)
1012                 {
1013                         vec3_t neworigin2;
1014                         vec3_t neworigin3;
1015                         // note: QW uses the full player box for the trace, and yet still
1016                         // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1017                         // this mimics it for compatibility
1018                         VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1019                         VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1020                         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1021                                 trace = CL_TraceBox(neworigin2, s->mins, s->maxs, neworigin3, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
1022                         else
1023                                 trace = CL_TraceBox(neworigin2, vec3_origin, vec3_origin, neworigin3, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
1024                         if (trace.fraction == 1 && !trace.startsolid)
1025                                 friction *= s->movevars_edgefriction;
1026                 }
1027                 // apply ground friction
1028                 f = 1 - s->q.frametime * friction * ((f < s->movevars_stopspeed) ? (s->movevars_stopspeed / f) : 1);
1029                 f = max(f, 0);
1030                 VectorScale(s->velocity, f, s->velocity);
1031                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1032                 if (addspeed > 0)
1033                 {
1034                         accelspeed = min(s->movevars_accelerate * s->q.frametime * wishspeed, addspeed);
1035                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1036                 }
1037                 s->velocity[2] -= cl_gravity.value * s->q.frametime;
1038                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1039                         s->velocity[2] = 0;
1040                 if (VectorLength2(s->velocity))
1041                         CL_ClientMovement_Move(s);
1042         }
1043         else
1044         {
1045                 if (s->waterjumptime <= 0)
1046                 {
1047                         vec_t f;
1048                         vec_t vel_straight;
1049                         vec_t vel_z;
1050                         vec3_t vel_perpend;
1051
1052                         // apply air speed limit
1053                         wishspeed = min(wishspeed, s->movevars_maxairspeed);
1054
1055                         /*
1056                         addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1057                         if (addspeed > 0)
1058                         {
1059                                 accelspeed = min(s->movevars_accelerate * s->q.frametime * wishspeed, addspeed);
1060                                 VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1061                         }
1062                         */
1063
1064                         vel_straight = DotProduct(s->velocity, wishdir);
1065                         vel_z = s->velocity[2];
1066                         VectorMA(s->velocity, -vel_straight, wishdir, vel_perpend);
1067                         vel_perpend[2] -= vel_z;
1068
1069                         f = wishspeed - vel_straight;
1070                         if(f > 0)
1071                                 vel_straight += min(f, s->movevars_accelerate * s->q.frametime * wishspeed) * s->movevars_airaccel_qw;
1072                         if(wishspeed > 0)
1073                                 vel_straight += min(wishspeed, s->movevars_accelerate * s->q.frametime * wishspeed) * (1 - s->movevars_airaccel_qw);
1074
1075                         VectorM(1 - (s->q.frametime * (wishspeed / s->movevars_maxairspeed) * s->movevars_airaccel_sideways_friction), vel_perpend, vel_perpend);
1076
1077                         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1078                         s->velocity[2] += vel_z;
1079                 }
1080                 s->velocity[2] -= cl_gravity.value * s->q.frametime;
1081                 CL_ClientMovement_Move(s);
1082         }
1083 }
1084
1085 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1086 {
1087         //Con_Printf(" %f", frametime);
1088         if (!s->q.jump)
1089                 s->canjump = true;
1090         s->waterjumptime -= s->q.frametime;
1091         CL_ClientMovement_UpdateStatus(s);
1092         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1093                 CL_ClientMovement_Physics_Swim(s);
1094         else
1095                 CL_ClientMovement_Physics_Walk(s);
1096 }
1097
1098 void CL_ClientMovement_Replay(void)
1099 {
1100         int i;
1101         cl_clientmovement_state_t s;
1102
1103         if (!cl.movement_replay)
1104                 return;
1105         cl.movement_replay = false;
1106
1107         // set up starting state for the series of moves
1108         memset(&s, 0, sizeof(s));
1109         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1110         VectorCopy(cl.mvelocity[0], s.velocity);
1111         s.crouched = true; // will be updated on first move
1112         s.canjump = cl.movement_replay_canjump;
1113         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1114
1115         // set up movement variables
1116         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1117         {
1118                 s.movevars_gravity = cl.qw_movevars_gravity;
1119                 s.movevars_stopspeed = cl.qw_movevars_stopspeed;
1120                 s.movevars_maxspeed = cl.qw_movevars_maxspeed;
1121                 s.movevars_spectatormaxspeed = cl.qw_movevars_spectatormaxspeed;
1122                 s.movevars_accelerate = cl.qw_movevars_accelerate;
1123                 s.movevars_airaccelerate = cl.qw_movevars_airaccelerate;
1124                 s.movevars_wateraccelerate = cl.qw_movevars_wateraccelerate;
1125                 s.movevars_friction = cl.qw_movevars_friction;
1126                 s.movevars_waterfriction = cl.qw_movevars_waterfriction;
1127                 s.movevars_entgravity = cl.qw_movevars_entgravity;
1128                 s.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1129                 s.movevars_edgefriction = cl_movement_edgefriction.value;
1130                 s.movevars_maxairspeed = cl_movement_maxairspeed.value;
1131                 s.movevars_stepheight = cl_movement_stepheight.value;
1132                 s.movevars_airaccel_qw = 1.0;
1133                 s.movevars_airaccel_sideways_friction = 0.0;
1134         }
1135         else
1136         {
1137                 s.movevars_gravity = sv_gravity.value;
1138                 s.movevars_stopspeed = cl_movement_stopspeed.value;
1139                 s.movevars_maxspeed = cl_movement_maxspeed.value;
1140                 s.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1141                 s.movevars_accelerate = cl_movement_accelerate.value;
1142                 s.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1143                 s.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1144                 s.movevars_friction = cl_movement_friction.value;
1145                 s.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1146                 s.movevars_entgravity = 1;
1147                 s.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1148                 s.movevars_edgefriction = cl_movement_edgefriction.value;
1149                 s.movevars_maxairspeed = cl_movement_maxairspeed.value;
1150                 s.movevars_stepheight = cl_movement_stepheight.value;
1151                 s.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1152                 s.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1153         }
1154
1155         cl.movement_predicted = (cl_movement.integer && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission) && ((cls.protocol != PROTOCOL_DARKPLACES6 && cls.protocol != PROTOCOL_DARKPLACES7) || cl.servermovesequence);
1156         if (cl.movement_predicted)
1157         {
1158                 //Con_Printf("%f: ", cl.mtime[0]);
1159
1160                 // replay the input queue to predict current location
1161                 // note: this relies on the fact there's always one queue item at the end
1162
1163                 for (i = 0;i < cl.movement_numqueue;i++)
1164                 {
1165                         s.q = cl.movement_queue[i];
1166                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1167                         if (s.q.frametime > 0.05)
1168                         {
1169                                 s.q.frametime *= 0.5;
1170                                 CL_ClientMovement_PlayerMove(&s);
1171                         }
1172                         CL_ClientMovement_PlayerMove(&s);
1173                 }
1174         }
1175         else
1176         {
1177                 // get the first movement queue entry to know whether to crouch and such
1178                 s.q = cl.movement_queue[0];
1179         }
1180
1181         // store replay location
1182         CL_ClientMovement_UpdateStatus(&s);
1183         cl.movement_time[1] = cl.movement_time[0];
1184         cl.movement_time[0] = cl.movement_queue[cl.movement_numqueue-1].time;
1185         VectorCopy(cl.movement_origin, cl.movement_oldorigin);
1186         VectorCopy(s.origin, cl.movement_origin);
1187         VectorCopy(s.velocity, cl.movement_velocity);
1188         //VectorCopy(s.origin, cl.entities[cl.playerentity].state_current.origin);
1189         //VectorSet(cl.entities[cl.playerentity].state_current.angles, 0, cl.viewangles[1], 0);
1190
1191         // update the onground flag if appropriate
1192         // when not predicted, cl.onground is only cleared by cl_parse.c, but can
1193         // be set forcefully here to hide server inconsistencies in the onground
1194         // flag (such as when stepping up stairs, the onground flag tends to turn
1195         // off briefly due to precision errors, particularly at high framerates),
1196         // such inconsistencies can mess up the gun bobbing and stair smoothing,
1197         // so they must be avoided.
1198         if (cl.movement_predicted)
1199                 cl.onground = s.onground;
1200         else if (s.onground)
1201                 cl.onground = true;
1202
1203         // react to onground state changes (for gun bob)
1204         if (cl.onground)
1205         {
1206                 if (!cl.oldonground)
1207                         cl.hitgroundtime = cl.time;
1208                 cl.lastongroundtime = cl.time;
1209         }
1210         cl.oldonground = cl.onground;
1211 }
1212
1213 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, qw_usercmd_t *from, qw_usercmd_t *to)
1214 {
1215         int bits;
1216
1217         bits = 0;
1218         if (to->angles[0] != from->angles[0])
1219                 bits |= QW_CM_ANGLE1;
1220         if (to->angles[1] != from->angles[1])
1221                 bits |= QW_CM_ANGLE2;
1222         if (to->angles[2] != from->angles[2])
1223                 bits |= QW_CM_ANGLE3;
1224         if (to->forwardmove != from->forwardmove)
1225                 bits |= QW_CM_FORWARD;
1226         if (to->sidemove != from->sidemove)
1227                 bits |= QW_CM_SIDE;
1228         if (to->upmove != from->upmove)
1229                 bits |= QW_CM_UP;
1230         if (to->buttons != from->buttons)
1231                 bits |= QW_CM_BUTTONS;
1232         if (to->impulse != from->impulse)
1233                 bits |= QW_CM_IMPULSE;
1234
1235         MSG_WriteByte(buf, bits);
1236         if (bits & QW_CM_ANGLE1)
1237                 MSG_WriteAngle16i(buf, to->angles[0]);
1238         if (bits & QW_CM_ANGLE2)
1239                 MSG_WriteAngle16i(buf, to->angles[1]);
1240         if (bits & QW_CM_ANGLE3)
1241                 MSG_WriteAngle16i(buf, to->angles[2]);
1242         if (bits & QW_CM_FORWARD)
1243                 MSG_WriteShort(buf, to->forwardmove);
1244         if (bits & QW_CM_SIDE)
1245                 MSG_WriteShort(buf, to->sidemove);
1246         if (bits & QW_CM_UP)
1247                 MSG_WriteShort(buf, to->upmove);
1248         if (bits & QW_CM_BUTTONS)
1249                 MSG_WriteByte(buf, to->buttons);
1250         if (bits & QW_CM_IMPULSE)
1251                 MSG_WriteByte(buf, to->impulse);
1252         MSG_WriteByte(buf, to->msec);
1253 }
1254
1255 /*
1256 ==============
1257 CL_SendMove
1258 ==============
1259 */
1260 extern cvar_t cl_netinputpacketspersecond;
1261 void CL_SendMove(void)
1262 {
1263         int i, j, packetloss;
1264         int bits;
1265         int impulse;
1266         sizebuf_t buf;
1267         unsigned char data[128];
1268         static double lastsendtime = 0;
1269 #define MOVEAVERAGING 0
1270 #if MOVEAVERAGING
1271         static float accumforwardmove = 0, accumsidemove = 0, accumupmove = 0, accumtotal = 0; // accumulation
1272 #endif
1273         float forwardmove, sidemove, upmove;
1274
1275         // if playing a demo, do nothing
1276         if (!cls.netcon)
1277                 return;
1278
1279 #if MOVEAVERAGING
1280         // accumulate changes between messages
1281         accumforwardmove += cl.cmd.forwardmove;
1282         accumsidemove += cl.cmd.sidemove;
1283         accumupmove += cl.cmd.upmove;
1284         accumtotal++;
1285 #endif
1286
1287         if (cl_movement.integer && cls.signon == SIGNONS && cls.protocol != PROTOCOL_QUAKEWORLD)
1288         {
1289                 if (!cl.movement_needupdate)
1290                         return;
1291                 cl.movement_needupdate = false;
1292         }
1293         else
1294         {
1295                 double packettime = 1.0 / bound(10, cl_netinputpacketspersecond.value, 100);
1296                 // don't send too often or else network connections can get clogged by a high renderer framerate
1297                 if (realtime < lastsendtime + packettime)
1298                         return;
1299                 // don't let it fall behind if CL_SendMove hasn't been called recently
1300                 // (such is the case when framerate is too low for instance)
1301                 lastsendtime = max(lastsendtime + packettime, realtime);
1302         }
1303 #if MOVEAVERAGING
1304         // average the accumulated changes
1305         accumtotal = 1.0f / accumtotal;
1306         forwardmove = accumforwardmove * accumtotal;
1307         sidemove = accumsidemove * accumtotal;
1308         upmove = accumupmove * accumtotal;
1309         accumforwardmove = 0;
1310         accumsidemove = 0;
1311         accumupmove = 0;
1312         accumtotal = 0;
1313 #else
1314         // use the latest values
1315         forwardmove = cl.cmd.forwardmove;
1316         sidemove = cl.cmd.sidemove;
1317         upmove = cl.cmd.upmove;
1318 #endif
1319
1320         if (cls.signon == SIGNONS)
1321                 CL_UpdatePrydonCursor();
1322
1323         buf.maxsize = 128;
1324         buf.cursize = 0;
1325         buf.data = data;
1326
1327         // set button bits
1328         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1329         bits = 0;
1330         if (in_attack.state   & 3) bits |=   1;in_attack.state  &= ~2;
1331         if (in_jump.state     & 3) bits |=   2;in_jump.state    &= ~2;
1332         if (in_button3.state  & 3) bits |=   4;in_button3.state &= ~2;
1333         if (in_button4.state  & 3) bits |=   8;in_button4.state &= ~2;
1334         if (in_button5.state  & 3) bits |=  16;in_button5.state &= ~2;
1335         if (in_button6.state  & 3) bits |=  32;in_button6.state &= ~2;
1336         if (in_button7.state  & 3) bits |=  64;in_button7.state &= ~2;
1337         if (in_button8.state  & 3) bits |= 128;in_button8.state &= ~2;
1338         if (in_use.state      & 3) bits |= 256;in_use.state     &= ~2;
1339         if (key_dest != key_game || key_consoleactive) bits |= 512;
1340         if (cl_prydoncursor.integer) bits |= 1024;
1341         if (in_button9.state  & 3)  bits |=   2048;in_button9.state  &= ~2;
1342         if (in_button10.state  & 3) bits |=   4096;in_button10.state &= ~2;
1343         if (in_button11.state  & 3) bits |=   8192;in_button11.state &= ~2;
1344         if (in_button12.state  & 3) bits |=  16384;in_button12.state &= ~2;
1345         if (in_button13.state  & 3) bits |=  32768;in_button13.state &= ~2;
1346         if (in_button14.state  & 3) bits |=  65536;in_button14.state &= ~2;
1347         if (in_button15.state  & 3) bits |= 131072;in_button15.state &= ~2;
1348         if (in_button16.state  & 3) bits |= 262144;in_button16.state &= ~2;
1349         // button bits 19-31 unused currently
1350         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1351         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1352         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1353         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1354         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1355
1356         impulse = in_impulse;
1357         in_impulse = 0;
1358
1359         csqc_buttons = bits;
1360
1361         if (cls.signon == SIGNONS)
1362         {
1363                 // always dump the first two messages, because they may contain leftover inputs from the last level
1364                 if (++cl.movemessages >= 2)
1365                 {
1366                         // send the movement message
1367                         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1368                         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1369                         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1370                         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1371                         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1372                         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1373                         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1374                         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1375                         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1376                         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total
1377                         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1378                         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1379                         {
1380                                 int checksumindex;
1381                                 double msectime;
1382                                 static double oldmsectime;
1383                                 qw_usercmd_t *cmd, *oldcmd;
1384                                 qw_usercmd_t nullcmd;
1385
1386                                 //Con_Printf("code qw_clc_move\n");
1387
1388                                 i = cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK;
1389                                 cmd = &cl.qw_moves[i];
1390                                 memset(&nullcmd, 0, sizeof(nullcmd));
1391                                 memset(cmd, 0, sizeof(*cmd));
1392                                 cmd->buttons = bits;
1393                                 cmd->impulse = impulse;
1394                                 cmd->forwardmove = (short)bound(-32768, forwardmove, 32767);
1395                                 cmd->sidemove = (short)bound(-32768, sidemove, 32767);
1396                                 cmd->upmove = (short)bound(-32768, upmove, 32767);
1397                                 VectorCopy(cl.viewangles, cmd->angles);
1398                                 msectime = realtime * 1000;
1399                                 cmd->msec = (unsigned char)bound(0, msectime - oldmsectime, 255);
1400                                 // ridiculous value rejection (matches qw)
1401                                 if (cmd->msec > 250)
1402                                         cmd->msec = 100;
1403                                 oldmsectime = msectime;
1404
1405                                 CL_ClientMovement_InputQW(cmd);
1406
1407                                 MSG_WriteByte(&buf, qw_clc_move);
1408                                 // save the position for a checksum byte
1409                                 checksumindex = buf.cursize;
1410                                 MSG_WriteByte(&buf, 0);
1411                                 // packet loss percentage
1412                                 for (j = 0, packetloss = 0;j < 100;j++)
1413                                         packetloss += cls.netcon->packetlost[j];
1414                                 MSG_WriteByte(&buf, packetloss);
1415                                 // write most recent 3 moves
1416                                 i = (cls.netcon->qw.outgoing_sequence-2) & QW_UPDATE_MASK;
1417                                 cmd = &cl.qw_moves[i];
1418                                 QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, cmd);
1419                                 oldcmd = cmd;
1420                                 i = (cls.netcon->qw.outgoing_sequence-1) & QW_UPDATE_MASK;
1421                                 cmd = &cl.qw_moves[i];
1422                                 QW_MSG_WriteDeltaUsercmd(&buf, oldcmd, cmd);
1423                                 oldcmd = cmd;
1424                                 i = cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK;
1425                                 cmd = &cl.qw_moves[i];
1426                                 QW_MSG_WriteDeltaUsercmd(&buf, oldcmd, cmd);
1427                                 // calculate the checksum
1428                                 buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->qw.outgoing_sequence);
1429                                 // if delta compression history overflows, request no delta
1430                                 if (cls.netcon->qw.outgoing_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1431                                         cl.qw_validsequence = 0;
1432                                 // request delta compression if appropriate
1433                                 if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1434                                 {
1435                                         cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1436                                         MSG_WriteByte(&buf, qw_clc_delta);
1437                                         MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1438                                 }
1439                                 else
1440                                         cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = -1;
1441                         }
1442                         else if (cls.protocol == PROTOCOL_QUAKE || cls.protocol == PROTOCOL_QUAKEDP || cls.protocol == PROTOCOL_NEHAHRAMOVIE)
1443                         {
1444                                 // 5 bytes
1445                                 MSG_WriteByte (&buf, clc_move);
1446                                 MSG_WriteFloat (&buf, cl.mtime[0]);     // so server can get ping times
1447                                 // 3 bytes
1448                                 for (i = 0;i < 3;i++)
1449                                         MSG_WriteAngle8i (&buf, cl.viewangles[i]);
1450                                 // 6 bytes
1451                                 MSG_WriteCoord16i (&buf, forwardmove);
1452                                 MSG_WriteCoord16i (&buf, sidemove);
1453                                 MSG_WriteCoord16i (&buf, upmove);
1454                                 // 2 bytes
1455                                 MSG_WriteByte (&buf, bits);
1456                                 MSG_WriteByte (&buf, impulse);
1457
1458                                 CL_ClientMovement_Input((bits & 2) != 0, false);
1459                         }
1460                         else if (cls.protocol == PROTOCOL_DARKPLACES2 || cls.protocol == PROTOCOL_DARKPLACES3)
1461                         {
1462                                 // 5 bytes
1463                                 MSG_WriteByte (&buf, clc_move);
1464                                 MSG_WriteFloat (&buf, cl.mtime[0]);     // so server can get ping times
1465                                 // 12 bytes
1466                                 for (i = 0;i < 3;i++)
1467                                         MSG_WriteAngle32f (&buf, cl.viewangles[i]);
1468                                 // 6 bytes
1469                                 MSG_WriteCoord16i (&buf, forwardmove);
1470                                 MSG_WriteCoord16i (&buf, sidemove);
1471                                 MSG_WriteCoord16i (&buf, upmove);
1472                                 // 2 bytes
1473                                 MSG_WriteByte (&buf, bits);
1474                                 MSG_WriteByte (&buf, impulse);
1475
1476                                 CL_ClientMovement_Input((bits & 2) != 0, false);
1477                         }
1478                         else if (cls.protocol == PROTOCOL_DARKPLACES1 || cls.protocol == PROTOCOL_DARKPLACES4 || cls.protocol == PROTOCOL_DARKPLACES5)
1479                         {
1480                                 // 5 bytes
1481                                 MSG_WriteByte (&buf, clc_move);
1482                                 MSG_WriteFloat (&buf, cl.mtime[0]);     // so server can get ping times
1483                                 // 6 bytes
1484                                 for (i = 0;i < 3;i++)
1485                                         MSG_WriteAngle16i (&buf, cl.viewangles[i]);
1486                                 // 6 bytes
1487                                 MSG_WriteCoord16i (&buf, forwardmove);
1488                                 MSG_WriteCoord16i (&buf, sidemove);
1489                                 MSG_WriteCoord16i (&buf, upmove);
1490                                 // 2 bytes
1491                                 MSG_WriteByte (&buf, bits);
1492                                 MSG_WriteByte (&buf, impulse);
1493
1494                                 CL_ClientMovement_Input((bits & 2) != 0, false);
1495                         }
1496                         else
1497                         {
1498                                 // 5 bytes
1499                                 MSG_WriteByte (&buf, clc_move);
1500                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1501                                 {
1502                                         if (cl_movement.integer)
1503                                         {
1504                                                 cl.movesequence++;
1505                                                 MSG_WriteLong (&buf, cl.movesequence);
1506                                         }
1507                                         else
1508                                                 MSG_WriteLong (&buf, 0);
1509                                 }
1510                                 MSG_WriteFloat (&buf, cl.mtime[0]);     // so server can get ping times
1511                                 // 6 bytes
1512                                 for (i = 0;i < 3;i++)
1513                                         MSG_WriteAngle16i (&buf, cl.viewangles[i]);
1514                                 // 6 bytes
1515                                 MSG_WriteCoord16i (&buf, forwardmove);
1516                                 MSG_WriteCoord16i (&buf, sidemove);
1517                                 MSG_WriteCoord16i (&buf, upmove);
1518                                 // 5 bytes
1519                                 MSG_WriteLong (&buf, bits);
1520                                 MSG_WriteByte (&buf, impulse);
1521                                 // PRYDON_CLIENTCURSOR
1522                                 // 30 bytes
1523                                 MSG_WriteShort (&buf, (short)(cl.cmd.cursor_screen[0] * 32767.0f));
1524                                 MSG_WriteShort (&buf, (short)(cl.cmd.cursor_screen[1] * 32767.0f));
1525                                 MSG_WriteFloat (&buf, cl.cmd.cursor_start[0]);
1526                                 MSG_WriteFloat (&buf, cl.cmd.cursor_start[1]);
1527                                 MSG_WriteFloat (&buf, cl.cmd.cursor_start[2]);
1528                                 MSG_WriteFloat (&buf, cl.cmd.cursor_impact[0]);
1529                                 MSG_WriteFloat (&buf, cl.cmd.cursor_impact[1]);
1530                                 MSG_WriteFloat (&buf, cl.cmd.cursor_impact[2]);
1531                                 MSG_WriteShort (&buf, cl.cmd.cursor_entitynumber);
1532
1533                                 // FIXME: bits & 16 is +button5, Nexuiz specific
1534                                 CL_ClientMovement_Input((bits & 2) != 0, (bits & 16) != 0);
1535                         }
1536                 }
1537
1538                 if (cls.protocol != PROTOCOL_QUAKEWORLD)
1539                 {
1540                         // ack the last few frame numbers
1541                         // (redundent to improve handling of client->server packet loss)
1542                         // for LATESTFRAMENUMS == 3 case this is 15 bytes
1543                         for (i = 0;i < LATESTFRAMENUMS;i++)
1544                         {
1545                                 if (cl.latestframenums[i] > 0)
1546                                 {
1547                                         if (developer_networkentities.integer >= 1)
1548                                                 Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
1549                                         MSG_WriteByte(&buf, clc_ackframe);
1550                                         MSG_WriteLong(&buf, cl.latestframenums[i]);
1551                                 }
1552                         }
1553                 }
1554
1555                 // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1556                 // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1557         }
1558
1559         // send the reliable message (forwarded commands) if there is one
1560         NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol);
1561
1562         if (cls.netcon->message.overflowed)
1563         {
1564                 Con_Print("CL_SendMove: lost server connection\n");
1565                 CL_Disconnect();
1566                 Host_ShutdownServer();
1567         }
1568 }
1569
1570 /*
1571 ============
1572 CL_InitInput
1573 ============
1574 */
1575 void CL_InitInput (void)
1576 {
1577         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
1578         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
1579         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
1580         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
1581         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
1582         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
1583         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
1584         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
1585         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
1586         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
1587         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
1588         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
1589         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
1590         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
1591         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
1592         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
1593         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)\n");
1594         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
1595         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
1596         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
1597         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
1598         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
1599         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
1600         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
1601         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
1602         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
1603         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
1604         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
1605         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
1606         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
1607         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
1608         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
1609         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
1610
1611         // LordHavoc: added use button
1612         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
1613         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
1614
1615         // LordHavoc: added 6 new buttons
1616         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
1617         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
1618         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
1619         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
1620         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
1621         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
1622         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
1623         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
1624         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
1625         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
1626         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
1627         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
1628         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
1629         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
1630         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
1631         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
1632         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
1633         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
1634         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
1635         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
1636         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
1637         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
1638         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
1639         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
1640         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
1641         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
1642         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
1643         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
1644
1645         // LordHavoc: added bestweapon command
1646         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 87654321)");
1647
1648         Cvar_RegisterVariable(&cl_movement);
1649         Cvar_RegisterVariable(&cl_movement_latency);
1650         Cvar_RegisterVariable(&cl_movement_maxspeed);
1651         Cvar_RegisterVariable(&cl_movement_maxairspeed);
1652         Cvar_RegisterVariable(&cl_movement_stopspeed);
1653         Cvar_RegisterVariable(&cl_movement_friction);
1654         Cvar_RegisterVariable(&cl_movement_edgefriction);
1655         Cvar_RegisterVariable(&cl_movement_stepheight);
1656         Cvar_RegisterVariable(&cl_movement_airaccelerate);
1657         Cvar_RegisterVariable(&cl_movement_accelerate);
1658         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
1659         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
1660         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
1661         Cvar_RegisterVariable(&cl_gravity);
1662         Cvar_RegisterVariable(&cl_slowmo);
1663
1664         Cvar_RegisterVariable(&in_pitch_min);
1665         Cvar_RegisterVariable(&in_pitch_max);
1666         Cvar_RegisterVariable(&m_filter);
1667
1668         Cvar_RegisterVariable(&cl_netinputpacketspersecond);
1669
1670         Cvar_RegisterVariable(&cl_nodelta);
1671 }
1672