cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 in_bestweapon_info_t in_bestweapon_info[IN_BESTWEAPON_MAX];
 201
 202 void IN_BestWeapon_Register(const char *name, int impulse, int weaponbit, int activeweaponcode, int ammostat, int ammomin)
 203 {
 204         int i;
 205         for(i = 0; i < IN_BESTWEAPON_MAX && in_bestweapon_info[i].impulse; ++i)
 206                 if(in_bestweapon_info[i].impulse == impulse)
 207                         break;
 208         if(i >= IN_BESTWEAPON_MAX)
 209         {
 210                 Con_Printf("no slot left for weapon definition; increase IN_BESTWEAPON_MAX\n");
 211                 return; // sorry
 212         }
 213         strlcpy(in_bestweapon_info[i].name, name, sizeof(in_bestweapon_info[i].name));
 214         in_bestweapon_info[i].impulse = impulse;
 215         if(weaponbit != -1)
 216                 in_bestweapon_info[i].weaponbit = weaponbit;
 217         if(activeweaponcode != -1)
 218                 in_bestweapon_info[i].activeweaponcode = activeweaponcode;
 219         if(ammostat != -1)
 220                 in_bestweapon_info[i].ammostat = ammostat;
 221         if(ammomin != -1)
 222                 in_bestweapon_info[i].ammomin = ammomin;
 223 }
 224
 225 void IN_BestWeapon_ResetData (void)
 226 {
 227         memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 228         IN_BestWeapon_Register("1", 1, IT_AXE, IT_AXE, STAT_SHELLS, 0);
 229         IN_BestWeapon_Register("2", 2, IT_SHOTGUN, IT_SHOTGUN, STAT_SHELLS, 1);
 230         IN_BestWeapon_Register("3", 3, IT_SUPER_SHOTGUN, IT_SUPER_SHOTGUN, STAT_SHELLS, 1);
 231         IN_BestWeapon_Register("4", 4, IT_NAILGUN, IT_NAILGUN, STAT_NAILS, 1);
 232         IN_BestWeapon_Register("5", 5, IT_SUPER_NAILGUN, IT_SUPER_NAILGUN, STAT_NAILS, 1);
 233         IN_BestWeapon_Register("6", 6, IT_GRENADE_LAUNCHER, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1);
 234         IN_BestWeapon_Register("7", 7, IT_ROCKET_LAUNCHER, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1);
 235         IN_BestWeapon_Register("8", 8, IT_LIGHTNING, IT_LIGHTNING, STAT_CELLS, 1);
 236         IN_BestWeapon_Register("9", 9, 128, 128, STAT_CELLS, 1); // generic energy weapon for mods
 237         IN_BestWeapon_Register("p", 209, 128, 128, STAT_CELLS, 1); // dpmod plasma gun
 238         IN_BestWeapon_Register("w", 210, 8388608, 8388608, STAT_CELLS, 1); // dpmod plasma wave cannon
 239         IN_BestWeapon_Register("l", 225, HIT_LASER_CANNON, HIT_LASER_CANNON, STAT_CELLS, 1); // hipnotic laser cannon
 240         IN_BestWeapon_Register("h", 226, HIT_MJOLNIR, HIT_MJOLNIR, STAT_CELLS, 0); // hipnotic mjolnir hammer
 241 }
 242
 243 void IN_BestWeapon_Register_f (void)
 244 {
 245         if(Cmd_Argc() == 7)
 246         {
 247                 IN_BestWeapon_Register(
 248                         Cmd_Argv(1),
 249                         atoi(Cmd_Argv(2)),
 250                         atoi(Cmd_Argv(3)),
 251                         atoi(Cmd_Argv(4)),
 252                         atoi(Cmd_Argv(5)),
 253                         atoi(Cmd_Argv(6))
 254                 );
 255         }
 256         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "clear"))
 257         {
 258                 memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 259         }
 260         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "quake"))
 261         {
 262                 IN_BestWeapon_ResetData();
 263         }
 264         else
 265         {
 266                 Con_Printf("Usage: %s weaponshortname impulse itemcode activeweaponcode ammostat ammomin; %s clear; %s quake\n", Cmd_Argv(0), Cmd_Argv(0), Cmd_Argv(0));
 267         }
 268 }
 269
 270 void IN_BestWeapon (void)
 271 {
 272         int i, n;
 273         const char *t;
 274         if (Cmd_Argc() < 2)
 275         {
 276                 Con_Printf("bestweapon requires 1 or more parameters\n");
 277                 return;
 278         }
 279         for (i = 1;i < Cmd_Argc();i++)
 280         {
 281                 t = Cmd_Argv(i);
 282                 // figure out which weapon this character refers to
 283                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 284                 {
 285                         if (!strcmp(in_bestweapon_info[n].name, t))
 286                         {
 287                                 // we found out what weapon this character refers to
 288                                 // check if the inventory contains the weapon and enough ammo
 289                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 290                                 {
 291                                         // we found one of the weapons the player wanted
 292                                         // send an impulse to switch to it
 293                                         in_impulse = in_bestweapon_info[n].impulse;
 294                                         return;
 295                                 }
 296                                 break;
 297                         }
 298                 }
 299                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 300         }
 301         // if we couldn't find any of the weapons, there's nothing more we can do...
 302 }
 303
 304 #if 0
 305 void IN_CycleWeapon (void)
 306 {
 307         int i, n;
 308         int first = -1;
 309         qboolean found = false;
 310         const char *t;
 311         if (Cmd_Argc() < 2)
 312         {
 313                 Con_Printf("bestweapon requires 1 or more parameters\n");
 314                 return;
 315         }
 316         for (i = 1;i < Cmd_Argc();i++)
 317         {
 318                 t = Cmd_Argv(i);
 319                 // figure out which weapon this character refers to
 320                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 321                 {
 322                         if (!strcmp(in_bestweapon_info[n].name, t))
 323                         {
 324                                 // we found out what weapon this character refers to
 325                                 // check if the inventory contains the weapon and enough ammo
 326                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 327                                 {
 328                                         // we found one of the weapons the player wanted
 329                                         if(first == -1)
 330                                                 first = n;
 331                                         if(found)
 332                                         {
 333                                                 in_impulse = in_bestweapon_info[n].impulse;
 334                                                 return;
 335                                         }
 336                                         if(cl.stats[STAT_ACTIVEWEAPON] == in_bestweapon_info[n].activeweaponcode)
 337                                                 found = true;
 338                                 }
 339                                 break;
 340                         }
 341                 }
 342                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 343         }
 344         if(first != -1)
 345         {
 346                 in_impulse = in_bestweapon_info[first].impulse;
 347                 return;
 348         }
 349         // if we couldn't find any of the weapons, there's nothing more we can do...
 350 }
 351 #endif
 352
 353 /*
 354 ===============
 355 CL_KeyState
 356
 357 Returns 0.25 if a key was pressed and released during the frame,
 358 0.5 if it was pressed and held
 359 0 if held then released, and
 360 1.0 if held for the entire time
 361 ===============
 362 */
 363 float CL_KeyState (kbutton_t *key)
 364 {
 365         float           val;
 366         qboolean        impulsedown, impulseup, down;
 367
 368         impulsedown = (key->state & 2) != 0;
 369         impulseup = (key->state & 4) != 0;
 370         down = (key->state & 1) != 0;
 371         val = 0;
 372
 373         if (impulsedown && !impulseup)
 374         {
 375                 if (down)
 376                         val = 0.5;      // pressed and held this frame
 377                 else
 378                         val = 0;        //      I_Error ();
 379         }
 380         if (impulseup && !impulsedown)
 381         {
 382                 if (down)
 383                         val = 0;        //      I_Error ();
 384                 else
 385                         val = 0;        // released this frame
 386         }
 387         if (!impulsedown && !impulseup)
 388         {
 389                 if (down)
 390                         val = 1.0;      // held the entire frame
 391                 else
 392                         val = 0;        // up the entire frame
 393         }
 394         if (impulsedown && impulseup)
 395         {
 396                 if (down)
 397                         val = 0.75;     // released and re-pressed this frame
 398                 else
 399                         val = 0.25;     // pressed and released this frame
 400         }
 401
 402         key->state &= 1;                // clear impulses
 403
 404         return val;
 405 }
 406
 407
 408
 409
 410 //==========================================================================
 411
 412 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 413 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 414 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 415 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 416
 417 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 418 cvar_t cl_movecliptokeyboard = {0, "cl_movecliptokeyboard", "0", "if set to 1, any move is clipped to the nine keyboard states; if set to 2, only the direction is clipped, not the amount"};
 419
 420 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 421 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 422
 423 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 424
 425 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 426 cvar_t cl_movement_nettimeout = {CVAR_SAVE, "cl_movement_nettimeout", "0.3", "stops predicting moves when server is lagging badly (avoids major performance problems), timeout in seconds"};
 427 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
 428 cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
 429 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 430 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 431 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 432 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 433 cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
 434 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
 435 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "1", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 436 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 437 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 438 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 439 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 440 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 441 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (reduces speed gain when zigzagging) (should match sv_airaccel_qw); when < 0, the speed is clamped against the maximum allowed forward speed after the move"};
 442 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction); when < 0, only so much friction is applied that braking (by accelerating backwards) cannot be stronger"};
 443
 444 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
 445 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
 446
 447 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 448 cvar_t m_accelerate = {CVAR_SAVE, "m_accelerate","1", "mouse acceleration factor (try 2)"};
 449 cvar_t m_accelerate_minspeed = {CVAR_SAVE, "m_accelerate_minspeed","5000", "below this speed, no acceleration is done"};
 450 cvar_t m_accelerate_maxspeed = {CVAR_SAVE, "m_accelerate_maxspeed","10000", "above this speed, full acceleration is done"};
 451 cvar_t m_accelerate_filter = {CVAR_SAVE, "m_accelerate_filter","0.1", "mouse acceleration factor filtering"};
 452
 453 cvar_t cl_netfps = {CVAR_SAVE, "cl_netfps","72", "how many input packets to send to server each second"};
 454 cvar_t cl_netrepeatinput = {CVAR_SAVE, "cl_netrepeatinput", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
 455 cvar_t cl_netimmediatebuttons = {CVAR_SAVE, "cl_netimmediatebuttons", "1", "sends extra packets whenever your buttons change or an impulse is used (basically: whenever you click fire or change weapon)"};
 456
 457 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 458
 459 extern cvar_t v_flipped;
 460
 461 /*
 462 ================
 463 CL_AdjustAngles
 464
 465 Moves the local angle positions
 466 ================
 467 */
 468 void CL_AdjustAngles (void)
 469 {
 470         float   speed;
 471         float   up, down;
 472
 473         if (in_speed.state & 1)
 474                 speed = cl.realframetime * cl_anglespeedkey.value;
 475         else
 476                 speed = cl.realframetime;
 477
 478         if (!(in_strafe.state & 1))
 479         {
 480                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 481                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 482         }
 483         if (in_klook.state & 1)
 484         {
 485                 V_StopPitchDrift ();
 486                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 487                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 488         }
 489
 490         up = CL_KeyState (&in_lookup);
 491         down = CL_KeyState(&in_lookdown);
 492
 493         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 494         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 495
 496         if (up || down)
 497                 V_StopPitchDrift ();
 498
 499         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 500         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
 501         if (cl.viewangles[YAW] >= 180)
 502                 cl.viewangles[YAW] -= 360;
 503         if (cl.viewangles[PITCH] >= 180)
 504                 cl.viewangles[PITCH] -= 360;
 505         cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 506         cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
 507 }
 508
 509 int cl_ignoremousemoves = 2;
 510
 511 /*
 512 ================
 513 CL_Input
 514
 515 Send the intended movement message to the server
 516 ================
 517 */
 518 void CL_Input (void)
 519 {
 520         float mx, my;
 521         static float old_mouse_x = 0, old_mouse_y = 0;
 522
 523         // clamp before the move to prevent starting with bad angles
 524         CL_AdjustAngles ();
 525
 526         if(v_flipped.integer)
 527                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 528
 529         // reset some of the command fields
 530         cl.cmd.forwardmove = 0;
 531         cl.cmd.sidemove = 0;
 532         cl.cmd.upmove = 0;
 533
 534         // get basic movement from keyboard
 535         if (in_strafe.state & 1)
 536         {
 537                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 538                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 539         }
 540
 541         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 542         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 543
 544         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 545         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 546
 547         if (! (in_klook.state & 1) )
 548         {
 549                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 550                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 551         }
 552
 553         // adjust for speed key
 554         if (in_speed.state & 1)
 555         {
 556                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 557                 cl.cmd.sidemove *= cl_movespeedkey.value;
 558                 cl.cmd.upmove *= cl_movespeedkey.value;
 559         }
 560
 561         // allow mice or other external controllers to add to the move
 562         IN_Move ();
 563
 564         // apply m_accelerate if it is on
 565         if(m_accelerate.value > 1)
 566         {
 567                 static float averagespeed = 0;
 568                 float speed, f, mi, ma;
 569
 570                 speed = sqrt(in_mouse_x * in_mouse_x + in_mouse_y * in_mouse_y) / cl.realframetime;
 571                 if(m_accelerate_filter.value > 0)
 572                         f = bound(0, cl.realframetime / m_accelerate_filter.value, 1);
 573                 else
 574                         f = 1;
 575                 averagespeed = speed * f + averagespeed * (1 - f);
 576
 577                 mi = max(1, m_accelerate_minspeed.value);
 578                 ma = max(m_accelerate_minspeed.value + 1, m_accelerate_maxspeed.value);
 579
 580                 if(averagespeed <= mi)
 581                 {
 582                         f = 1;
 583                 }
 584                 else if(averagespeed >= ma)
 585                 {
 586                         f = m_accelerate.value;
 587                 }
 588                 else
 589                 {
 590                         /*
 591                         f = log(averagespeed);
 592                         mi = log(mi);
 593                         ma = log(ma);
 594                         */
 595                         f = averagespeed;
 596                         mi = mi;
 597                         ma = ma;
 598                         f = (f - mi) / (ma - mi) * (m_accelerate.value - 1) + 1;
 599                 }
 600
 601                 in_mouse_x *= f;
 602                 in_mouse_y *= f;
 603         }
 604
 605         // apply m_filter if it is on
 606         mx = in_mouse_x;
 607         my = in_mouse_y;
 608         if (m_filter.integer)
 609         {
 610                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 611                 in_mouse_y = (my + old_mouse_y) * 0.5;
 612         }
 613         old_mouse_x = mx;
 614         old_mouse_y = my;
 615
 616         // ignore a mouse move if mouse was activated/deactivated this frame
 617         if (cl_ignoremousemoves)
 618         {
 619                 cl_ignoremousemoves--;
 620                 in_mouse_x = old_mouse_x = 0;
 621                 in_mouse_y = old_mouse_y = 0;
 622         }
 623
 624         // if not in menu, apply mouse move to viewangles/movement
 625         if (!key_consoleactive && key_dest == key_game && !cl.csqc_wantsmousemove)
 626         {
 627                 float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
 628                 if (cl_prydoncursor.integer > 0)
 629                 {
 630                         // mouse interacting with the scene, mostly stationary view
 631                         V_StopPitchDrift();
 632                         cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
 633                         cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
 634                 }
 635                 else if (in_strafe.state & 1)
 636                 {
 637                         // strafing mode, all looking is movement
 638                         V_StopPitchDrift();
 639                         cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 640                         if (noclip_anglehack)
 641                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 642                         else
 643                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 644                 }
 645                 else if ((in_mlook.state & 1) || freelook.integer)
 646                 {
 647                         // mouselook, lookstrafe causes turning to become strafing
 648                         V_StopPitchDrift();
 649                         if (lookstrafe.integer)
 650                                 cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 651                         else
 652                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 653                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * modulatedsensitivity * cl.viewzoom;
 654                 }
 655                 else
 656                 {
 657                         // non-mouselook, yaw turning and forward/back movement
 658                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 659                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 660                 }
 661         }
 662         else // don't pitch drift when csqc is controlling the mouse
 663                 V_StopPitchDrift();
 664
 665         if(v_flipped.integer)
 666         {
 667                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 668                 cl.cmd.sidemove = -cl.cmd.sidemove;
 669         }
 670
 671         // clamp after the move to prevent rendering with bad angles
 672         CL_AdjustAngles ();
 673
 674         if(cl_movecliptokeyboard.integer)
 675         {
 676                 vec_t f = 1;
 677                 if (in_speed.state & 1)
 678                         f *= cl_movespeedkey.value;
 679                 if(cl_movecliptokeyboard.integer == 2)
 680                 {
 681                         // digital direction, analog amount
 682                         vec_t wishvel_x, wishvel_y;
 683                         f *= max(cl_sidespeed.value, max(cl_forwardspeed.value, cl_backspeed.value));
 684                         wishvel_x = fabs(cl.cmd.forwardmove);
 685                         wishvel_y = fabs(cl.cmd.sidemove);
 686                         if(wishvel_x != 0 && wishvel_y != 0 && wishvel_x != wishvel_y)
 687                         {
 688                                 vec_t wishspeed = sqrt(wishvel_x * wishvel_x + wishvel_y * wishvel_y);
 689                                 if(wishvel_x >= 2 * wishvel_y)
 690                                 {
 691                                         // pure X motion
 692                                         if(cl.cmd.forwardmove > 0)
 693                                                 cl.cmd.forwardmove = wishspeed;
 694                                         else
 695                                                 cl.cmd.forwardmove = -wishspeed;
 696                                         cl.cmd.sidemove = 0;
 697                                 }
 698                                 else if(wishvel_y >= 2 * wishvel_x)
 699                                 {
 700                                         // pure Y motion
 701                                         cl.cmd.forwardmove = 0;
 702                                         if(cl.cmd.sidemove > 0)
 703                                                 cl.cmd.sidemove = wishspeed;
 704                                         else
 705                                                 cl.cmd.sidemove = -wishspeed;
 706                                 }
 707                                 else
 708                                 {
 709                                         // diagonal
 710                                         if(cl.cmd.forwardmove > 0)
 711                                                 cl.cmd.forwardmove = 0.70710678118654752440 * wishspeed;
 712                                         else
 713                                                 cl.cmd.forwardmove = -0.70710678118654752440 * wishspeed;
 714                                         if(cl.cmd.sidemove > 0)
 715                                                 cl.cmd.sidemove = 0.70710678118654752440 * wishspeed;
 716                                         else
 717                                                 cl.cmd.sidemove = -0.70710678118654752440 * wishspeed;
 718                                 }
 719                         }
 720                 }
 721                 else if(cl_movecliptokeyboard.integer)
 722                 {
 723                         // digital direction, digital amount
 724                         if(cl.cmd.sidemove >= cl_sidespeed.value * f * 0.5)
 725                                 cl.cmd.sidemove = cl_sidespeed.value * f;
 726                         else if(cl.cmd.sidemove <= -cl_sidespeed.value * f * 0.5)
 727                                 cl.cmd.sidemove = -cl_sidespeed.value * f;
 728                         else
 729                                 cl.cmd.sidemove = 0;
 730                         if(cl.cmd.forwardmove >= cl_forwardspeed.value * f * 0.5)
 731                                 cl.cmd.forwardmove = cl_forwardspeed.value * f;
 732                         else if(cl.cmd.forwardmove <= -cl_backspeed.value * f * 0.5)
 733                                 cl.cmd.forwardmove = -cl_backspeed.value * f;
 734                         else
 735                                 cl.cmd.forwardmove = 0;
 736                 }
 737         }
 738 }
 739
 740 #include "cl_collision.h"
 741
 742 void CL_UpdatePrydonCursor(void)
 743 {
 744         vec3_t temp;
 745
 746         if (cl_prydoncursor.integer <= 0)
 747                 VectorClear(cl.cmd.cursor_screen);
 748
 749         /*
 750         if (cl.cmd.cursor_screen[0] < -1)
 751         {
 752                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 753                 cl.cmd.cursor_screen[0] = -1;
 754         }
 755         if (cl.cmd.cursor_screen[0] > 1)
 756         {
 757                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 758                 cl.cmd.cursor_screen[0] = 1;
 759         }
 760         if (cl.cmd.cursor_screen[1] < -1)
 761         {
 762                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 763                 cl.cmd.cursor_screen[1] = -1;
 764         }
 765         if (cl.cmd.cursor_screen[1] > 1)
 766         {
 767                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 768                 cl.cmd.cursor_screen[1] = 1;
 769         }
 770         */
 771         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 772         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 773         cl.cmd.cursor_screen[2] = 1;
 774
 775         // calculate current view matrix
 776         Matrix4x4_OriginFromMatrix(&r_refdef.view.matrix, cl.cmd.cursor_start);
 777         // calculate direction vector of cursor in viewspace by using frustum slopes
 778         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
 779         Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
 780         // trace from view origin to the cursor
 781         if (cl_prydoncursor_notrace.integer)
 782         {
 783                 cl.cmd.cursor_fraction = 1.0f;
 784                 VectorCopy(cl.cmd.cursor_end, cl.cmd.cursor_impact);
 785                 VectorClear(cl.cmd.cursor_normal);
 786                 cl.cmd.cursor_entitynumber = 0;
 787         }
 788         else
 789                 cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
 790 }
 791
 792 typedef enum waterlevel_e
 793 {
 794         WATERLEVEL_NONE,
 795         WATERLEVEL_WETFEET,
 796         WATERLEVEL_SWIMMING,
 797         WATERLEVEL_SUBMERGED
 798 }
 799 waterlevel_t;
 800
 801 typedef struct cl_clientmovement_state_s
 802 {
 803         // position
 804         vec3_t origin;
 805         vec3_t velocity;
 806         // current bounding box (different if crouched vs standing)
 807         vec3_t mins;
 808         vec3_t maxs;
 809         // currently on the ground
 810         qboolean onground;
 811         // currently crouching
 812         qboolean crouched;
 813         // what kind of water (SUPERCONTENTS_LAVA for instance)
 814         int watertype;
 815         // how deep
 816         waterlevel_t waterlevel;
 817         // weird hacks when jumping out of water
 818         // (this is in seconds and counts down to 0)
 819         float waterjumptime;
 820
 821         // user command
 822         usercmd_t cmd;
 823 }
 824 cl_clientmovement_state_t;
 825
 826 #define NUMOFFSETS 27
 827 static vec3_t offsets[NUMOFFSETS] =
 828 {
 829 // 1 no nudge (just return the original if this test passes)
 830         { 0.000,  0.000,  0.000},
 831 // 6 simple nudges
 832         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 833         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 834         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 835 // 4 diagonal flat nudges
 836         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 837         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 838 // 8 diagonal upward nudges
 839         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 840         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 841         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 842         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 843 // 8 diagonal downward nudges
 844         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 845         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 846         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 847         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 848 };
 849
 850 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 851 {
 852         int i;
 853         vec3_t neworigin;
 854         for (i = 0;i < NUMOFFSETS;i++)
 855         {
 856                 VectorAdd(offsets[i], s->origin, neworigin);
 857                 if (!CL_TraceBox(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
 858                 {
 859                         VectorCopy(neworigin, s->origin);
 860                         return true;
 861                 }
 862         }
 863         // if all offsets failed, give up
 864         return false;
 865 }
 866
 867 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 868 {
 869         vec3_t origin1, origin2;
 870         trace_t trace;
 871
 872         // make sure player is not stuck
 873         CL_ClientMovement_Unstick(s);
 874
 875         // set crouched
 876         if (s->cmd.crouch)
 877         {
 878                 // wants to crouch, this always works..
 879                 if (!s->crouched)
 880                         s->crouched = true;
 881         }
 882         else
 883         {
 884                 // wants to stand, if currently crouching we need to check for a
 885                 // low ceiling first
 886                 if (s->crouched)
 887                 {
 888                         trace = CL_TraceBox(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 889                         if (!trace.startsolid)
 890                                 s->crouched = false;
 891                 }
 892         }
 893         if (s->crouched)
 894         {
 895                 VectorCopy(cl.playercrouchmins, s->mins);
 896                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 897         }
 898         else
 899         {
 900                 VectorCopy(cl.playerstandmins, s->mins);
 901                 VectorCopy(cl.playerstandmaxs, s->maxs);
 902         }
 903
 904         // set onground
 905         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 906         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 1); // -2 causes clientside doublejump bug at above 150fps, raising that to 300fps :)
 907         trace = CL_TraceBox(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 908         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 909
 910         // set watertype/waterlevel
 911         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 912         s->waterlevel = WATERLEVEL_NONE;
 913         s->watertype = CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 914         if (s->watertype)
 915         {
 916                 s->waterlevel = WATERLEVEL_WETFEET;
 917                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 918                 if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 919                 {
 920                         s->waterlevel = WATERLEVEL_SWIMMING;
 921                         origin1[2] = s->origin[2] + 22;
 922                         if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 923                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 924                 }
 925         }
 926
 927         // water jump prediction
 928         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 929                 s->waterjumptime = 0;
 930 }
 931
 932 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 933 {
 934         int bump;
 935         double t;
 936         vec_t f;
 937         vec3_t neworigin;
 938         vec3_t currentorigin2;
 939         vec3_t neworigin2;
 940         vec3_t primalvelocity;
 941         trace_t trace;
 942         trace_t trace2;
 943         trace_t trace3;
 944         CL_ClientMovement_UpdateStatus(s);
 945         VectorCopy(s->velocity, primalvelocity);
 946         for (bump = 0, t = s->cmd.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 947         {
 948                 VectorMA(s->origin, t, s->velocity, neworigin);
 949                 trace = CL_TraceBox(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 950                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 951                 {
 952                         // may be a step or wall, try stepping up
 953                         // first move forward at a higher level
 954                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
 955                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
 956                         trace2 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 957                         if (!trace2.startsolid)
 958                         {
 959                                 // then move down from there
 960                                 VectorCopy(trace2.endpos, currentorigin2);
 961                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 962                                 trace3 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 963                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 964                                 // accept the new trace if it made some progress
 965                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 966                                 {
 967                                         trace = trace2;
 968                                         VectorCopy(trace3.endpos, trace.endpos);
 969                                 }
 970                         }
 971                 }
 972
 973                 // check if it moved at all
 974                 if (trace.fraction >= 0.001)
 975                         VectorCopy(trace.endpos, s->origin);
 976
 977                 // check if it moved all the way
 978                 if (trace.fraction == 1)
 979                         break;
 980
 981                 //if (trace.plane.normal[2] > 0.7)
 982                 //      s->onground = true;
 983
 984                 t -= t * trace.fraction;
 985
 986                 f = DotProduct(s->velocity, trace.plane.normal);
 987                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 988         }
 989         if (s->waterjumptime > 0)
 990                 VectorCopy(primalvelocity, s->velocity);
 991 }
 992
 993
 994 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 995 {
 996         vec_t wishspeed;
 997         vec_t f;
 998         vec3_t wishvel;
 999         vec3_t wishdir;
1000
1001         // water jump only in certain situations
1002         // this mimics quakeworld code
1003         if (s->cmd.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
1004         {
1005                 vec3_t forward;
1006                 vec3_t yawangles;
1007                 vec3_t spot;
1008                 VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1009                 AngleVectors(yawangles, forward, NULL, NULL);
1010                 VectorMA(s->origin, 24, forward, spot);
1011                 spot[2] += 8;
1012                 if (CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1013                 {
1014                         spot[2] += 24;
1015                         if (!CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1016                         {
1017                                 VectorScale(forward, 50, s->velocity);
1018                                 s->velocity[2] = 310;
1019                                 s->waterjumptime = 2;
1020                                 s->onground = false;
1021                                 s->cmd.canjump = false;
1022                         }
1023                 }
1024         }
1025
1026         if (!(s->cmd.forwardmove*s->cmd.forwardmove + s->cmd.sidemove*s->cmd.sidemove + s->cmd.upmove*s->cmd.upmove))
1027         {
1028                 // drift towards bottom
1029                 VectorSet(wishvel, 0, 0, -60);
1030         }
1031         else
1032         {
1033                 // swim
1034                 vec3_t forward;
1035                 vec3_t right;
1036                 vec3_t up;
1037                 // calculate movement vector
1038                 AngleVectors(s->cmd.viewangles, forward, right, up);
1039                 VectorSet(up, 0, 0, 1);
1040                 VectorMAMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, s->cmd.upmove, up, wishvel);
1041         }
1042
1043         // split wishvel into wishspeed and wishdir
1044         wishspeed = VectorLength(wishvel);
1045         if (wishspeed)
1046                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1047         else
1048                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1049         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
1050
1051         if (s->crouched)
1052                 wishspeed *= 0.5;
1053
1054         if (s->waterjumptime <= 0)
1055         {
1056                 // water friction
1057                 f = 1 - s->cmd.frametime * cl.movevars_waterfriction * (cls.protocol == PROTOCOL_QUAKEWORLD ? s->waterlevel : 1);
1058                 f = bound(0, f, 1);
1059                 VectorScale(s->velocity, f, s->velocity);
1060
1061                 // water acceleration
1062                 f = wishspeed - DotProduct(s->velocity, wishdir);
1063                 if (f > 0)
1064                 {
1065                         f = min(cl.movevars_wateraccelerate * s->cmd.frametime * wishspeed, f);
1066                         VectorMA(s->velocity, f, wishdir, s->velocity);
1067                 }
1068
1069                 // holding jump button swims upward slowly
1070                 if (s->cmd.jump)
1071                 {
1072                         if (s->watertype & SUPERCONTENTS_LAVA)
1073                                 s->velocity[2] =  50;
1074                         else if (s->watertype & SUPERCONTENTS_SLIME)
1075                                 s->velocity[2] =  80;
1076                         else
1077                         {
1078                                 if (gamemode == GAME_NEXUIZ)
1079                                         s->velocity[2] = 200;
1080                                 else
1081                                         s->velocity[2] = 100;
1082                         }
1083                 }
1084         }
1085
1086         CL_ClientMovement_Move(s);
1087 }
1088
1089 static vec_t CL_IsMoveInDirection(vec_t forward, vec_t side, vec_t angle)
1090 {
1091         if(forward == 0 && side == 0)
1092                 return 0; // avoid division by zero
1093         angle -= RAD2DEG(atan2(side, forward));
1094         angle = (ANGLEMOD(angle + 180) - 180) / 45;
1095         if(angle >  1)
1096                 return 0;
1097         if(angle < -1)
1098                 return 0;
1099         return 1 - fabs(angle);
1100 }
1101
1102 static vec_t CL_GeomLerp(vec_t a, vec_t lerp, vec_t b)
1103 {
1104         if(a == 0)
1105         {
1106                 if(lerp < 1)
1107                         return 0;
1108                 else
1109                         return b;
1110         }
1111         if(b == 0)
1112         {
1113                 if(lerp > 0)
1114                         return 0;
1115                 else
1116                         return a;
1117         }
1118         return a * pow(fabs(b / a), lerp);
1119 }
1120
1121 void CL_ClientMovement_Physics_CPM_PM_Aircontrol(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1122 {
1123         vec_t zspeed, speed, dot, k;
1124
1125 #if 0
1126         // this doesn't play well with analog input
1127         if(s->cmd.forwardmove == 0 || s->cmd.sidemove != 0)
1128                 return;
1129         k = 32;
1130 #else
1131         k = 32 * (2 * CL_IsMoveInDirection(s->cmd.forwardmove, s->cmd.sidemove, 0) - 1);
1132         if(k <= 0)
1133                 return;
1134 #endif
1135
1136         k *= bound(0, wishspeed / cl.movevars_maxairspeed, 1);
1137
1138         zspeed = s->velocity[2];
1139         s->velocity[2] = 0;
1140         speed = VectorNormalizeLength(s->velocity);
1141
1142         dot = DotProduct(s->velocity, wishdir);
1143
1144         if(dot > 0) { // we can't change direction while slowing down
1145                 k *= cl.movevars_aircontrol*pow(dot, cl.movevars_aircontrol_power)*s->cmd.frametime;
1146                 VectorMAM(speed, s->velocity, k, wishdir, s->velocity);
1147                 VectorNormalize(s->velocity);
1148         }
1149
1150         VectorScale(s->velocity, speed, s->velocity);
1151         s->velocity[2] = zspeed;
1152 }
1153
1154 void CL_ClientMovement_Physics_PM_Accelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed, vec_t wishspeed0, vec_t accel, vec_t accelqw, vec_t sidefric)
1155 {
1156         vec_t vel_straight;
1157         vec_t vel_z;
1158         vec3_t vel_perpend;
1159         vec_t step;
1160         vec3_t vel_xy;
1161         vec_t vel_xy_current;
1162         vec_t vel_xy_backward, vel_xy_forward;
1163         qboolean speedclamp;
1164
1165         speedclamp = (accelqw < 0);
1166         if(speedclamp)
1167                 accelqw = -accelqw;
1168
1169         if(cl.moveflags & MOVEFLAG_Q2AIRACCELERATE)
1170                 wishspeed0 = wishspeed; // don't need to emulate this Q1 bug
1171
1172         vel_straight = DotProduct(s->velocity, wishdir);
1173         vel_z = s->velocity[2];
1174         VectorCopy(s->velocity, vel_xy); vel_xy[2] -= vel_z;
1175         VectorMA(vel_xy, -vel_straight, wishdir, vel_perpend);
1176
1177         step = accel * s->cmd.frametime * wishspeed0;
1178
1179         vel_xy_current  = VectorLength(vel_xy);
1180         vel_xy_forward  = vel_xy_current + bound(0, wishspeed - vel_xy_current, step) * accelqw + step * (1 - accelqw);
1181         vel_xy_backward = vel_xy_current - bound(0, wishspeed + vel_xy_current, step) * accelqw - step * (1 - accelqw);
1182         if(vel_xy_backward < 0)
1183                 vel_xy_backward = 0; // not that it REALLY occurs that this would cause wrong behaviour afterwards
1184
1185         vel_straight    = vel_straight   + bound(0, wishspeed - vel_straight,   step) * accelqw + step * (1 - accelqw);
1186
1187         if(sidefric < 0 && VectorLength2(vel_perpend))
1188                 // negative: only apply so much sideways friction to stay below the speed you could get by "braking"
1189         {
1190                 vec_t f, fmin;
1191                 f = max(0, 1 + s->cmd.frametime * wishspeed * sidefric);
1192                 fmin = (vel_xy_backward*vel_xy_backward - vel_straight*vel_straight) / VectorLength2(vel_perpend);
1193                 // assume: fmin > 1
1194                 // vel_xy_backward*vel_xy_backward - vel_straight*vel_straight > vel_perpend*vel_perpend
1195                 // vel_xy_backward*vel_xy_backward > vel_straight*vel_straight + vel_perpend*vel_perpend
1196                 // vel_xy_backward*vel_xy_backward > vel_xy * vel_xy
1197                 // obviously, this cannot be
1198                 if(fmin <= 0)
1199                         VectorScale(vel_perpend, f, vel_perpend);
1200                 else
1201                 {
1202                         fmin = sqrt(fmin);
1203                         VectorScale(vel_perpend, max(fmin, f), vel_perpend);
1204                 }
1205         }
1206         else
1207                 VectorScale(vel_perpend, max(0, 1 - s->cmd.frametime * wishspeed * sidefric), vel_perpend);
1208
1209         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1210
1211         if(speedclamp)
1212         {
1213                 vel_xy_current = min(VectorLength(s->velocity), vel_xy_forward);
1214                 if(vel_xy_current > 0) // prevent division by zero
1215                 {
1216                         VectorNormalize(s->velocity);
1217                         VectorScale(s->velocity, vel_xy_current, s->velocity);
1218                 }
1219         }
1220
1221         s->velocity[2] += vel_z;
1222 }
1223
1224 void CL_ClientMovement_Physics_PM_AirAccelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1225 {
1226     vec3_t curvel, wishvel, acceldir, curdir;
1227     float addspeed, accelspeed, curspeed;
1228     float dot;
1229
1230     float airforwardaccel = cl.movevars_warsowbunny_airforwardaccel;
1231     float bunnyaccel = cl.movevars_warsowbunny_accel;
1232     float bunnytopspeed = cl.movevars_warsowbunny_topspeed;
1233     float turnaccel = cl.movevars_warsowbunny_turnaccel;
1234     float backtosideratio = cl.movevars_warsowbunny_backtosideratio;
1235
1236     if( !wishspeed )
1237         return;
1238
1239     VectorCopy( s->velocity, curvel );
1240     curvel[2] = 0;
1241     curspeed = VectorLength( curvel );
1242
1243     if( wishspeed > curspeed * 1.01f )
1244     {
1245         float accelspeed = curspeed + airforwardaccel * cl.movevars_maxairspeed * s->cmd.frametime;
1246         if( accelspeed < wishspeed )
1247             wishspeed = accelspeed;
1248     }
1249     else
1250     {
1251         float f = ( bunnytopspeed - curspeed ) / ( bunnytopspeed - cl.movevars_maxairspeed );
1252         if( f < 0 )
1253             f = 0;
1254         wishspeed = max( curspeed, cl.movevars_maxairspeed ) + bunnyaccel * f * cl.movevars_maxairspeed * s->cmd.frametime;
1255     }
1256     VectorScale( wishdir, wishspeed, wishvel );
1257     VectorSubtract( wishvel, curvel, acceldir );
1258     addspeed = VectorNormalizeLength( acceldir );
1259
1260     accelspeed = turnaccel * cl.movevars_maxairspeed /* wishspeed */ * s->cmd.frametime;
1261     if( accelspeed > addspeed )
1262         accelspeed = addspeed;
1263
1264     if( backtosideratio < 1.0f )
1265     {
1266         VectorNormalize2( curvel, curdir );
1267         dot = DotProduct( acceldir, curdir );
1268         if( dot < 0 )
1269             VectorMA( acceldir, -( 1.0f - backtosideratio ) * dot, curdir, acceldir );
1270     }
1271
1272     VectorMA( s->velocity, accelspeed, acceldir, s->velocity );
1273 }
1274
1275 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
1276 {
1277         vec_t friction;
1278         vec_t wishspeed;
1279         vec_t addspeed;
1280         vec_t accelspeed;
1281         vec_t f;
1282         vec_t gravity;
1283         vec3_t forward;
1284         vec3_t right;
1285         vec3_t up;
1286         vec3_t wishvel;
1287         vec3_t wishdir;
1288         vec3_t yawangles;
1289         trace_t trace;
1290
1291         // jump if on ground with jump button pressed but only if it has been
1292         // released at least once since the last jump
1293         if (s->cmd.jump)
1294         {
1295                 if (s->onground && (s->cmd.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
1296                 {
1297                         s->velocity[2] += cl.movevars_jumpvelocity;
1298                         s->onground = false;
1299                         s->cmd.canjump = false;
1300                 }
1301         }
1302         else
1303                 s->cmd.canjump = true;
1304
1305         // calculate movement vector
1306         VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1307         AngleVectors(yawangles, forward, right, up);
1308         VectorMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, wishvel);
1309
1310         // split wishvel into wishspeed and wishdir
1311         wishspeed = VectorLength(wishvel);
1312         if (wishspeed)
1313                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1314         else
1315                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1316         // check if onground
1317         if (s->onground)
1318         {
1319                 wishspeed = min(wishspeed, cl.movevars_maxspeed);
1320                 if (s->crouched)
1321                         wishspeed *= 0.5;
1322
1323                 // apply edge friction
1324                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1325                 if (f > 0)
1326                 {
1327                         friction = cl.movevars_friction;
1328                         if (cl.movevars_edgefriction != 1)
1329                         {
1330                                 vec3_t neworigin2;
1331                                 vec3_t neworigin3;
1332                                 // note: QW uses the full player box for the trace, and yet still
1333                                 // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1334                                 // this mimics it for compatibility
1335                                 VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1336                                 VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1337                                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1338                                         trace = CL_TraceBox(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1339                                 else
1340                                         trace = CL_TraceLine(neworigin2, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1341                                 if (trace.fraction == 1 && !trace.startsolid)
1342                                         friction *= cl.movevars_edgefriction;
1343                         }
1344                         // apply ground friction
1345                         f = 1 - s->cmd.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
1346                         f = max(f, 0);
1347                         VectorScale(s->velocity, f, s->velocity);
1348                 }
1349                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1350                 if (addspeed > 0)
1351                 {
1352                         accelspeed = min(cl.movevars_accelerate * s->cmd.frametime * wishspeed, addspeed);
1353                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1354                 }
1355                 if(cl.moveflags & MOVEFLAG_NOGRAVITYONGROUND)
1356                         gravity = 0;
1357                 else
1358                         gravity = cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1359                 if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
1360                         s->velocity[2] -= gravity * 0.5f;
1361                 else
1362                         s->velocity[2] -= gravity;
1363                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1364                         s->velocity[2] = 0;
1365                 if (VectorLength2(s->velocity))
1366                         CL_ClientMovement_Move(s);
1367                 if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
1368                         s->velocity[2] -= gravity * 0.5f;
1369         }
1370         else
1371         {
1372                 if (s->waterjumptime <= 0)
1373                 {
1374                         // apply air speed limit
1375                         vec_t accel, wishspeed0, wishspeed2, accelqw, strafity;
1376                         qboolean accelerating;
1377
1378                         accelqw = cl.movevars_airaccel_qw;
1379                         wishspeed0 = wishspeed;
1380                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1381                         if (s->crouched)
1382                                 wishspeed *= 0.5;
1383                         accel = cl.movevars_airaccelerate;
1384
1385                         accelerating = (DotProduct(s->velocity, wishdir) > 0);
1386                         wishspeed2 = wishspeed;
1387
1388                         // CPM: air control
1389                         if(cl.movevars_airstopaccelerate != 0)
1390                                 if(DotProduct(s->velocity, wishdir) < 0)
1391                                         accel = cl.movevars_airstopaccelerate;
1392                         strafity = CL_IsMoveInDirection(s->cmd.forwardmove, s->cmd.sidemove, -90) + CL_IsMoveInDirection(s->cmd.forwardmove, s->cmd.sidemove, +90); // if one is nonzero, other is always zero
1393                         if(cl.movevars_maxairstrafespeed)
1394                                 wishspeed = min(wishspeed, CL_GeomLerp(cl.movevars_maxairspeed, strafity, cl.movevars_maxairstrafespeed));
1395                         if(cl.movevars_airstrafeaccelerate)
1396                                 accel = CL_GeomLerp(cl.movevars_airaccelerate, strafity, cl.movevars_airstrafeaccelerate);
1397                         if(cl.movevars_airstrafeaccel_qw)
1398                                 accelqw =
1399                                         (((strafity > 0.5 ? cl.movevars_airstrafeaccel_qw : cl.movevars_airaccel_qw) >= 0) ? +1 : -1)
1400                                         *
1401                                         (1 - CL_GeomLerp(1 - fabs(cl.movevars_airaccel_qw), strafity, 1 - fabs(cl.movevars_airstrafeaccel_qw)));
1402
1403                         if(s->cmd.forwardmove == 0 && s->cmd.sidemove != 0)
1404                         {
1405                                 if(cl.movevars_maxairstrafespeed)
1406                                 {
1407                                         if(wishspeed > cl.movevars_maxairstrafespeed)
1408                                                 wishspeed = cl.movevars_maxairstrafespeed;
1409                                         if(cl.movevars_maxairstrafespeed < cl.movevars_maxairspeed)
1410                                                 accelqw = 1;
1411                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1412                                                 // if partially non-QW acceleration is used (as in, strafing
1413                                                 // would get faster than moving forward straight)
1414                                 }
1415                                 if(cl.movevars_airstrafeaccelerate)
1416                                 {
1417                                         accel = cl.movevars_airstrafeaccelerate;
1418                                         if(cl.movevars_airstrafeaccelerate > cl.movevars_airaccelerate)
1419                                                 accelqw = 1;
1420                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1421                                                 // if partially non-QW acceleration is used (as in, strafing
1422                                                 // would get faster than moving forward straight)
1423                                 }
1424                         }
1425                         // !CPM
1426
1427                         if(cl.movevars_warsowbunny_turnaccel && accelerating && s->cmd.sidemove == 0 && s->cmd.forwardmove != 0)
1428                                 CL_ClientMovement_Physics_PM_AirAccelerate(s, wishdir, wishspeed2);
1429                         else
1430                                 CL_ClientMovement_Physics_PM_Accelerate(s, wishdir, wishspeed, wishspeed0, accel, accelqw, cl.movevars_airaccel_sideways_friction / cl.movevars_maxairspeed);
1431
1432                         if(cl.movevars_aircontrol)
1433                                 CL_ClientMovement_Physics_CPM_PM_Aircontrol(s, wishdir, wishspeed2);
1434                 }
1435                 gravity = cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1436                 if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
1437                         s->velocity[2] -= gravity * 0.5f;
1438                 else
1439                         s->velocity[2] -= gravity;
1440                 CL_ClientMovement_Move(s);
1441                 if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
1442                         s->velocity[2] -= gravity * 0.5f;
1443         }
1444 }
1445
1446 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1447 {
1448         //Con_Printf(" %f", frametime);
1449         if (!s->cmd.jump)
1450                 s->cmd.canjump = true;
1451         s->waterjumptime -= s->cmd.frametime;
1452         CL_ClientMovement_UpdateStatus(s);
1453         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1454                 CL_ClientMovement_Physics_Swim(s);
1455         else
1456                 CL_ClientMovement_Physics_Walk(s);
1457 }
1458
1459 extern cvar_t slowmo;
1460 void CL_UpdateMoveVars(void)
1461 {
1462         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1463         {
1464                 cl.moveflags = 0;
1465         }
1466         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1467         {
1468                 cl.moveflags = cl.stats[STAT_MOVEFLAGS];
1469                 cl.movevars_ticrate = cl.statsf[STAT_MOVEVARS_TICRATE];
1470                 cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1471                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1472                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1473                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1474                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1475                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1476                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1477                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1478                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1479                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1480                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1481                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1482                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1483                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1484                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1485                 cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
1486                 cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
1487                 cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
1488                 cl.movevars_airstopaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTOPACCELERATE];
1489                 cl.movevars_airstrafeaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCELERATE];
1490                 cl.movevars_maxairstrafespeed = cl.statsf[STAT_MOVEVARS_MAXAIRSTRAFESPEED];
1491                 cl.movevars_airstrafeaccel_qw = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCEL_QW];
1492                 cl.movevars_aircontrol = cl.statsf[STAT_MOVEVARS_AIRCONTROL];
1493                 cl.movevars_aircontrol_power = cl.statsf[STAT_MOVEVARS_AIRCONTROL_POWER];
1494                 cl.movevars_warsowbunny_airforwardaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_AIRFORWARDACCEL];
1495                 cl.movevars_warsowbunny_accel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_ACCEL];
1496                 cl.movevars_warsowbunny_topspeed = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TOPSPEED];
1497                 cl.movevars_warsowbunny_turnaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TURNACCEL];
1498                 cl.movevars_warsowbunny_backtosideratio = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_BACKTOSIDERATIO];
1499         }
1500         else
1501         {
1502                 cl.moveflags = 0;
1503                 cl.movevars_ticrate = slowmo.value / bound(1.0f, cl_netfps.value, 1000.0f);
1504                 cl.movevars_timescale = slowmo.value;
1505                 cl.movevars_gravity = sv_gravity.value;
1506                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1507                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1508                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1509                 cl.movevars_accelerate = cl_movement_accelerate.value;
1510                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1511                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1512                 cl.movevars_friction = cl_movement_friction.value;
1513                 cl.movevars_wallfriction = cl_movement_wallfriction.value;
1514                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1515                 cl.movevars_entgravity = 1;
1516                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1517                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1518                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1519                 cl.movevars_stepheight = cl_movement_stepheight.value;
1520                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1521                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1522                 cl.movevars_airstopaccelerate = 0;
1523                 cl.movevars_airstrafeaccelerate = 0;
1524                 cl.movevars_maxairstrafespeed = 0;
1525                 cl.movevars_airstrafeaccel_qw = 0;
1526                 cl.movevars_aircontrol = 0;
1527                 cl.movevars_aircontrol_power = 2;
1528                 cl.movevars_warsowbunny_airforwardaccel = 0;
1529                 cl.movevars_warsowbunny_accel = 0;
1530                 cl.movevars_warsowbunny_topspeed = 0;
1531                 cl.movevars_warsowbunny_turnaccel = 0;
1532                 cl.movevars_warsowbunny_backtosideratio = 0;
1533         }
1534
1535         if(!(cl.moveflags & MOVEFLAG_VALID))
1536         {
1537                 if(gamemode == GAME_NEXUIZ)
1538                         cl.moveflags = MOVEFLAG_Q2AIRACCELERATE;
1539         }
1540
1541         if(cl.movevars_aircontrol_power <= 0)
1542                 cl.movevars_aircontrol = 2; // CPMA default
1543 }
1544
1545 void CL_ClientMovement_Replay(void)
1546 {
1547         int i;
1548         double totalmovemsec;
1549         cl_clientmovement_state_t s;
1550
1551         if (cl.movement_predicted && !cl.movement_replay)
1552                 return;
1553
1554         // set up starting state for the series of moves
1555         memset(&s, 0, sizeof(s));
1556         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1557         VectorCopy(cl.mvelocity[0], s.velocity);
1558         s.crouched = true; // will be updated on first move
1559         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1560
1561         totalmovemsec = 0;
1562         for (i = 0;i < CL_MAX_USERCMDS;i++)
1563                 if (cl.movecmd[i].sequence > cls.servermovesequence)
1564                         totalmovemsec += cl.movecmd[i].msec;
1565         cl.movement_predicted = totalmovemsec >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1566         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovemsec, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1567         if (cl.movement_predicted)
1568         {
1569                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1570
1571                 // replay the input queue to predict current location
1572                 // note: this relies on the fact there's always one queue item at the end
1573
1574                 // find how many are still valid
1575                 for (i = 0;i < CL_MAX_USERCMDS;i++)
1576                         if (cl.movecmd[i].sequence <= cls.servermovesequence)
1577                                 break;
1578                 // now walk them in oldest to newest order
1579                 for (i--;i >= 0;i--)
1580                 {
1581                         s.cmd = cl.movecmd[i];
1582                         if (i < CL_MAX_USERCMDS - 1)
1583                                 s.cmd.canjump = cl.movecmd[i+1].canjump;
1584                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1585                         //Con_Printf("%i ", s.cmd.msec);
1586                         if(s.cmd.frametime > 0.0005)
1587                         {
1588                                 if (s.cmd.frametime > 0.05)
1589                                 {
1590                                         s.cmd.frametime /= 2;
1591                                         CL_ClientMovement_PlayerMove(&s);
1592                                 }
1593                                 CL_ClientMovement_PlayerMove(&s);
1594                                 cl.movecmd[i].canjump = s.cmd.canjump;
1595                         }
1596                 }
1597                 //Con_Printf("\n");
1598                 CL_ClientMovement_UpdateStatus(&s);
1599         }
1600         else
1601         {
1602                 // get the first movement queue entry to know whether to crouch and such
1603                 s.cmd = cl.movecmd[0];
1604         }
1605
1606         if (cls.demoplayback) // for bob, speedometer
1607                 VectorCopy(cl.mvelocity[0], cl.movement_velocity);
1608         else
1609         {
1610                 cl.movement_replay = false;
1611                 // update the interpolation target position and velocity
1612                 VectorCopy(s.origin, cl.movement_origin);
1613                 VectorCopy(s.velocity, cl.movement_velocity);
1614         }
1615
1616         // update the onground flag if appropriate
1617         if (cl.movement_predicted)
1618         {
1619                 // when predicted we simply set the flag according to the UpdateStatus
1620                 cl.onground = s.onground;
1621         }
1622         else
1623         {
1624                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1625                 // an update packet is received, but can be forced on here to hide
1626                 // server inconsistencies in the onground flag
1627                 // (which mostly occur when stepping up stairs at very high framerates
1628                 //  where after the step up the move continues forward and not
1629                 //  downward so the ground is not detected)
1630                 //
1631                 // such onground inconsistencies can cause jittery gun bobbing and
1632                 // stair smoothing, so we set onground if UpdateStatus says so
1633                 if (s.onground)
1634                         cl.onground = true;
1635         }
1636
1637         // react to onground state changes (for gun bob)
1638         if (cl.onground)
1639         {
1640                 if (!cl.oldonground)
1641                         cl.hitgroundtime = cl.movecmd[0].time;
1642                 cl.lastongroundtime = cl.movecmd[0].time;
1643         }
1644         cl.oldonground = cl.onground;
1645 }
1646
1647 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1648 {
1649         int bits;
1650
1651         bits = 0;
1652         if (to->viewangles[0] != from->viewangles[0])
1653                 bits |= QW_CM_ANGLE1;
1654         if (to->viewangles[1] != from->viewangles[1])
1655                 bits |= QW_CM_ANGLE2;
1656         if (to->viewangles[2] != from->viewangles[2])
1657                 bits |= QW_CM_ANGLE3;
1658         if (to->forwardmove != from->forwardmove)
1659                 bits |= QW_CM_FORWARD;
1660         if (to->sidemove != from->sidemove)
1661                 bits |= QW_CM_SIDE;
1662         if (to->upmove != from->upmove)
1663                 bits |= QW_CM_UP;
1664         if (to->buttons != from->buttons)
1665                 bits |= QW_CM_BUTTONS;
1666         if (to->impulse != from->impulse)
1667                 bits |= QW_CM_IMPULSE;
1668
1669         MSG_WriteByte(buf, bits);
1670         if (bits & QW_CM_ANGLE1)
1671                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1672         if (bits & QW_CM_ANGLE2)
1673                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1674         if (bits & QW_CM_ANGLE3)
1675                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1676         if (bits & QW_CM_FORWARD)
1677                 MSG_WriteShort(buf, (short) to->forwardmove);
1678         if (bits & QW_CM_SIDE)
1679                 MSG_WriteShort(buf, (short) to->sidemove);
1680         if (bits & QW_CM_UP)
1681                 MSG_WriteShort(buf, (short) to->upmove);
1682         if (bits & QW_CM_BUTTONS)
1683                 MSG_WriteByte(buf, to->buttons);
1684         if (bits & QW_CM_IMPULSE)
1685                 MSG_WriteByte(buf, to->impulse);
1686         MSG_WriteByte(buf, to->msec);
1687 }
1688
1689 void CL_NewFrameReceived(int num)
1690 {
1691         if (developer_networkentities.integer >= 10)
1692                 Con_Printf("recv: svc_entities %i\n", num);
1693         cl.latestframenums[cl.latestframenumsposition] = num;
1694         cl.latestsendnums[cl.latestframenumsposition] = cl.cmd.sequence;
1695         cl.latestframenumsposition = (cl.latestframenumsposition + 1) % LATESTFRAMENUMS;
1696 }
1697
1698 /*
1699 ==============
1700 CL_SendMove
1701 ==============
1702 */
1703 usercmd_t nullcmd; // for delta compression of qw moves
1704 void CL_SendMove(void)
1705 {
1706         int i, j, packetloss;
1707         int checksumindex;
1708         int bits;
1709         int maxusercmds;
1710         usercmd_t *cmd;
1711         sizebuf_t buf;
1712         unsigned char data[1024];
1713         double packettime;
1714         int msecdelta;
1715         qboolean quemove;
1716         qboolean important;
1717
1718         // if playing a demo, do nothing
1719         if (!cls.netcon)
1720                 return;
1721
1722         // we don't que moves during a lag spike (potential network timeout)
1723         quemove = realtime - cl.last_received_message < cl_movement_nettimeout.value;
1724
1725         // we build up cl.cmd and then decide whether to send or not
1726         // we store this into cl.movecmd[0] for prediction each frame even if we
1727         // do not send, to make sure that prediction is instant
1728         cl.cmd.time = cl.time;
1729         cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
1730
1731         // set button bits
1732         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1733         bits = 0;
1734         if (in_attack.state   & 3) bits |=   1;
1735         if (in_jump.state     & 3) bits |=   2;
1736         if (in_button3.state  & 3) bits |=   4;
1737         if (in_button4.state  & 3) bits |=   8;
1738         if (in_button5.state  & 3) bits |=  16;
1739         if (in_button6.state  & 3) bits |=  32;
1740         if (in_button7.state  & 3) bits |=  64;
1741         if (in_button8.state  & 3) bits |= 128;
1742         if (in_use.state      & 3) bits |= 256;
1743         if (key_dest != key_game || key_consoleactive) bits |= 512;
1744         if (cl_prydoncursor.integer > 0) bits |= 1024;
1745         if (in_button9.state  & 3)  bits |=   2048;
1746         if (in_button10.state  & 3) bits |=   4096;
1747         if (in_button11.state  & 3) bits |=   8192;
1748         if (in_button12.state  & 3) bits |=  16384;
1749         if (in_button13.state  & 3) bits |=  32768;
1750         if (in_button14.state  & 3) bits |=  65536;
1751         if (in_button15.state  & 3) bits |= 131072;
1752         if (in_button16.state  & 3) bits |= 262144;
1753         // button bits 19-31 unused currently
1754         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1755         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1756         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1757         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1758         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1759
1760         // set buttons and impulse
1761         cl.cmd.buttons = bits;
1762         cl.cmd.impulse = in_impulse;
1763
1764         // set viewangles
1765         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1766
1767         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[1].time * 1000));
1768         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1769         // ridiculous value rejection (matches qw)
1770         if (cl.cmd.msec > 250)
1771                 cl.cmd.msec = 100;
1772         cl.cmd.frametime = cl.cmd.msec * (1.0 / 1000.0);
1773
1774         cl.cmd.predicted = cl_movement.integer != 0;
1775
1776         // movement is set by input code (forwardmove/sidemove/upmove)
1777         // always dump the first two moves, because they may contain leftover inputs from the last level
1778         if (cl.cmd.sequence <= 2)
1779                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1780
1781         cl.cmd.jump = (cl.cmd.buttons & 2) != 0;
1782         cl.cmd.crouch = 0;
1783         switch (cls.protocol)
1784         {
1785         case PROTOCOL_QUAKEWORLD:
1786         case PROTOCOL_QUAKE:
1787         case PROTOCOL_QUAKEDP:
1788         case PROTOCOL_NEHAHRAMOVIE:
1789         case PROTOCOL_NEHAHRABJP:
1790         case PROTOCOL_NEHAHRABJP2:
1791         case PROTOCOL_NEHAHRABJP3:
1792         case PROTOCOL_DARKPLACES1:
1793         case PROTOCOL_DARKPLACES2:
1794         case PROTOCOL_DARKPLACES3:
1795         case PROTOCOL_DARKPLACES4:
1796         case PROTOCOL_DARKPLACES5:
1797                 break;
1798         case PROTOCOL_DARKPLACES6:
1799         case PROTOCOL_DARKPLACES7:
1800                 // FIXME: cl.cmd.buttons & 16 is +button5, Nexuiz specific
1801                 cl.cmd.crouch = (cl.cmd.buttons & 16) != 0;
1802                 break;
1803         case PROTOCOL_UNKNOWN:
1804                 break;
1805         }
1806
1807         if (quemove)
1808                 cl.movecmd[0] = cl.cmd;
1809
1810         // don't predict more than 200fps
1811         if (realtime >= cl.lastpackettime + 0.005)
1812                 cl.movement_replay = true; // redo the prediction
1813
1814         // now decide whether to actually send this move
1815         // (otherwise it is only for prediction)
1816
1817         // don't send too often or else network connections can get clogged by a
1818         // high renderer framerate
1819         packettime = 1.0 / bound(1, cl_netfps.value, 1000);
1820         if (cl.movevars_timescale && cl.movevars_ticrate)
1821         {
1822                 float maxtic = cl.movevars_ticrate / cl.movevars_timescale;
1823                 packettime = min(packettime, maxtic);
1824         }
1825
1826         // do not send 0ms packets because they mess up physics
1827         if(cl.cmd.msec == 0 && cl.time > cl.oldtime && (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS))
1828                 return;
1829         // always send if buttons changed or an impulse is pending
1830         // even if it violates the rate limit!
1831         important = (cl.cmd.impulse || (cl_netimmediatebuttons.integer && cl.cmd.buttons != cl.movecmd[1].buttons));
1832         // don't send too often (cl_netfps)
1833         if (!important && realtime < cl.lastpackettime + packettime)
1834                 return;
1835         // don't choke the connection with packets (obey rate limit)
1836         // it is important that this check be last, because it adds a new
1837         // frame to the shownetgraph output and any cancelation after this
1838         // will produce a nasty spike-like look to the netgraph
1839         // we also still send if it is important
1840         if (!NetConn_CanSend(cls.netcon) && !important)
1841                 return;
1842         // try to round off the lastpackettime to a multiple of the packet interval
1843         // (this causes it to emit packets at a steady beat)
1844         if (packettime > 0)
1845                 cl.lastpackettime = floor(realtime / packettime) * packettime;
1846         else
1847                 cl.lastpackettime = realtime;
1848
1849         buf.maxsize = sizeof(data);
1850         buf.cursize = 0;
1851         buf.data = data;
1852
1853         // send the movement message
1854         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1855         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1856         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1857         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1858         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1859         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1860         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1861         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1862         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1863         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1864         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1865
1866         // set prydon cursor info
1867         CL_UpdatePrydonCursor();
1868
1869         if (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS)
1870         {
1871                 switch (cls.protocol)
1872                 {
1873                 case PROTOCOL_QUAKEWORLD:
1874                         MSG_WriteByte(&buf, qw_clc_move);
1875                         // save the position for a checksum byte
1876                         checksumindex = buf.cursize;
1877                         MSG_WriteByte(&buf, 0);
1878                         // packet loss percentage
1879                         for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1880                                 if (cls.netcon->incoming_netgraph[j].unreliablebytes == NETGRAPH_LOSTPACKET)
1881                                         packetloss++;
1882                         packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1883                         MSG_WriteByte(&buf, packetloss);
1884                         // write most recent 3 moves
1885                         QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1886                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1887                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.cmd);
1888                         // calculate the checksum
1889                         buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
1890                         // if delta compression history overflows, request no delta
1891                         if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1892                                 cl.qw_validsequence = 0;
1893                         // request delta compression if appropriate
1894                         if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1895                         {
1896                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1897                                 MSG_WriteByte(&buf, qw_clc_delta);
1898                                 MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1899                         }
1900                         else
1901                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
1902                         break;
1903                 case PROTOCOL_QUAKE:
1904                 case PROTOCOL_QUAKEDP:
1905                 case PROTOCOL_NEHAHRAMOVIE:
1906                 case PROTOCOL_NEHAHRABJP:
1907                 case PROTOCOL_NEHAHRABJP2:
1908                 case PROTOCOL_NEHAHRABJP3:
1909                         // 5 bytes
1910                         MSG_WriteByte (&buf, clc_move);
1911                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1912                         // 3 bytes
1913                         for (i = 0;i < 3;i++)
1914                                 MSG_WriteAngle8i (&buf, cl.cmd.viewangles[i]);
1915                         // 6 bytes
1916                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1917                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1918                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1919                         // 2 bytes
1920                         MSG_WriteByte (&buf, cl.cmd.buttons);
1921                         MSG_WriteByte (&buf, cl.cmd.impulse);
1922                         break;
1923                 case PROTOCOL_DARKPLACES2:
1924                 case PROTOCOL_DARKPLACES3:
1925                         // 5 bytes
1926                         MSG_WriteByte (&buf, clc_move);
1927                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1928                         // 12 bytes
1929                         for (i = 0;i < 3;i++)
1930                                 MSG_WriteAngle32f (&buf, cl.cmd.viewangles[i]);
1931                         // 6 bytes
1932                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1933                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1934                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1935                         // 2 bytes
1936                         MSG_WriteByte (&buf, cl.cmd.buttons);
1937                         MSG_WriteByte (&buf, cl.cmd.impulse);
1938                         break;
1939                 case PROTOCOL_DARKPLACES1:
1940                 case PROTOCOL_DARKPLACES4:
1941                 case PROTOCOL_DARKPLACES5:
1942                         // 5 bytes
1943                         MSG_WriteByte (&buf, clc_move);
1944                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1945                         // 6 bytes
1946                         for (i = 0;i < 3;i++)
1947                                 MSG_WriteAngle16i (&buf, cl.cmd.viewangles[i]);
1948                         // 6 bytes
1949                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1950                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1951                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1952                         // 2 bytes
1953                         MSG_WriteByte (&buf, cl.cmd.buttons);
1954                         MSG_WriteByte (&buf, cl.cmd.impulse);
1955                 case PROTOCOL_DARKPLACES6:
1956                 case PROTOCOL_DARKPLACES7:
1957                         // set the maxusercmds variable to limit how many should be sent
1958                         maxusercmds = bound(1, cl_netrepeatinput.integer + 1, min(3, CL_MAX_USERCMDS));
1959                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1960                         if (!cl.cmd.predicted)
1961                                 maxusercmds = 1;
1962
1963                         // send the latest moves in order, the old ones will be
1964                         // ignored by the server harmlessly, however if the previous
1965                         // packets were lost these moves will be used
1966                         //
1967                         // this reduces packet loss impact on gameplay.
1968                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1969                         {
1970                                 // don't repeat any stale moves
1971                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1972                                         continue;
1973                                 // 5/9 bytes
1974                                 MSG_WriteByte (&buf, clc_move);
1975                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1976                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1977                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1978                                 // 6 bytes
1979                                 for (i = 0;i < 3;i++)
1980                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1981                                 // 6 bytes
1982                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1983                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1984                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1985                                 // 5 bytes
1986                                 MSG_WriteLong (&buf, cmd->buttons);
1987                                 MSG_WriteByte (&buf, cmd->impulse);
1988                                 // PRYDON_CLIENTCURSOR
1989                                 // 30 bytes
1990                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1991                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1992                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1993                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1994                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1995                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1996                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1997                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1998                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1999                         }
2000                         break;
2001                 case PROTOCOL_UNKNOWN:
2002                         break;
2003                 }
2004         }
2005
2006         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
2007         {
2008                 // ack entity frame numbers received since the last input was sent
2009                 // (redundent to improve handling of client->server packet loss)
2010                 // if cl_netrepeatinput is 1 and client framerate matches server
2011                 // framerate, this is 10 bytes, if client framerate is lower this
2012                 // will be more...
2013                 int i, j;
2014                 int oldsequence = cl.cmd.sequence - bound(1, cl_netrepeatinput.integer + 1, 3);
2015                 if (oldsequence < 1)
2016                         oldsequence = 1;
2017                 for (i = 0;i < LATESTFRAMENUMS;i++)
2018                 {
2019                         j = (cl.latestframenumsposition + i) % LATESTFRAMENUMS;
2020                         if (cl.latestsendnums[j] >= oldsequence)
2021                         {
2022                                 if (developer_networkentities.integer >= 10)
2023                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[j]);
2024                                 MSG_WriteByte(&buf, clc_ackframe);
2025                                 MSG_WriteLong(&buf, cl.latestframenums[j]);
2026                         }
2027                 }
2028         }
2029
2030         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
2031         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
2032
2033         // acknowledge any recently received data blocks
2034         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
2035         {
2036                 MSG_WriteByte(&buf, clc_ackdownloaddata);
2037                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
2038                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
2039                 cls.dp_downloadack[i].start = 0;
2040                 cls.dp_downloadack[i].size = 0;
2041         }
2042
2043         // send the reliable message (forwarded commands) if there is one
2044         if (buf.cursize || cls.netcon->message.cursize)
2045                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
2046
2047         if (quemove)
2048         {
2049                 // update the cl.movecmd array which holds the most recent moves,
2050                 // because we now need a new slot for the next input
2051                 for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
2052                         cl.movecmd[i] = cl.movecmd[i-1];
2053                 cl.movecmd[0].msec = 0;
2054                 cl.movecmd[0].frametime = 0;
2055         }
2056
2057         // clear button 'click' states
2058         in_attack.state  &= ~2;
2059         in_jump.state    &= ~2;
2060         in_button3.state &= ~2;
2061         in_button4.state &= ~2;
2062         in_button5.state &= ~2;
2063         in_button6.state &= ~2;
2064         in_button7.state &= ~2;
2065         in_button8.state &= ~2;
2066         in_use.state     &= ~2;
2067         in_button9.state  &= ~2;
2068         in_button10.state &= ~2;
2069         in_button11.state &= ~2;
2070         in_button12.state &= ~2;
2071         in_button13.state &= ~2;
2072         in_button14.state &= ~2;
2073         in_button15.state &= ~2;
2074         in_button16.state &= ~2;
2075         // clear impulse
2076         in_impulse = 0;
2077
2078         if (cls.netcon->message.overflowed)
2079         {
2080                 Con_Print("CL_SendMove: lost server connection\n");
2081                 CL_Disconnect();
2082                 Host_ShutdownServer();
2083         }
2084 }
2085
2086 /*
2087 ============
2088 CL_InitInput
2089 ============
2090 */
2091 void CL_InitInput (void)
2092 {
2093         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
2094         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
2095         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
2096         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
2097         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
2098         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
2099         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
2100         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
2101         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
2102         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
2103         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
2104         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
2105         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
2106         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
2107         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
2108         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
2109         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
2110         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
2111         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
2112         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
2113         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
2114         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
2115         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
2116         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
2117         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
2118         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
2119         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
2120         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
2121         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
2122         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
2123         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
2124         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
2125         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
2126
2127         // LordHavoc: added use button
2128         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
2129         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
2130
2131         // LordHavoc: added 6 new buttons
2132         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
2133         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
2134         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
2135         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
2136         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
2137         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
2138         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
2139         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
2140         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
2141         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
2142         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
2143         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
2144         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
2145         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
2146         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
2147         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
2148         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
2149         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
2150         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
2151         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
2152         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
2153         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
2154         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
2155         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
2156         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
2157         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
2158         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
2159         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
2160
2161         // LordHavoc: added bestweapon command
2162         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
2163 #if 0
2164         Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
2165 #endif
2166         Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
2167
2168         Cvar_RegisterVariable(&cl_movecliptokeyboard);
2169         Cvar_RegisterVariable(&cl_movement);
2170         Cvar_RegisterVariable(&cl_movement_nettimeout);
2171         Cvar_RegisterVariable(&cl_movement_minping);
2172         Cvar_RegisterVariable(&cl_movement_track_canjump);
2173         Cvar_RegisterVariable(&cl_movement_maxspeed);
2174         Cvar_RegisterVariable(&cl_movement_maxairspeed);
2175         Cvar_RegisterVariable(&cl_movement_stopspeed);
2176         Cvar_RegisterVariable(&cl_movement_friction);
2177         Cvar_RegisterVariable(&cl_movement_wallfriction);
2178         Cvar_RegisterVariable(&cl_movement_waterfriction);
2179         Cvar_RegisterVariable(&cl_movement_edgefriction);
2180         Cvar_RegisterVariable(&cl_movement_stepheight);
2181         Cvar_RegisterVariable(&cl_movement_accelerate);
2182         Cvar_RegisterVariable(&cl_movement_airaccelerate);
2183         Cvar_RegisterVariable(&cl_movement_wateraccelerate);
2184         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
2185         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
2186         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
2187
2188         Cvar_RegisterVariable(&in_pitch_min);
2189         Cvar_RegisterVariable(&in_pitch_max);
2190         Cvar_RegisterVariable(&m_filter);
2191         Cvar_RegisterVariable(&m_accelerate);
2192         Cvar_RegisterVariable(&m_accelerate_minspeed);
2193         Cvar_RegisterVariable(&m_accelerate_maxspeed);
2194         Cvar_RegisterVariable(&m_accelerate_filter);
2195
2196         Cvar_RegisterVariable(&cl_netfps);
2197         Cvar_RegisterVariable(&cl_netrepeatinput);
2198         Cvar_RegisterVariable(&cl_netimmediatebuttons);
2199
2200         Cvar_RegisterVariable(&cl_nodelta);
2201 }
2202