collision.c

   1
   2 #include "quakedef.h"
   3 #include "polygon.h"
   4
   5 #define COLLISION_EDGEDIR_DOT_EPSILON (0.999f)
   6 #define COLLISION_EDGECROSS_MINLENGTH2 (1.0f / 4194304.0f)
   7 #define COLLISION_SNAPSCALE (32.0f)
   8 #define COLLISION_SNAP (1.0f / COLLISION_SNAPSCALE)
   9 #define COLLISION_SNAP2 (2.0f / COLLISION_SNAPSCALE)
  10 #define COLLISION_PLANE_DIST_EPSILON (2.0f / COLLISION_SNAPSCALE)
  11
  12 cvar_t collision_impactnudge = {0, "collision_impactnudge", "0.03125", "how much to back off from the impact"};
  13 cvar_t collision_startnudge = {0, "collision_startnudge", "0", "how much to bias collision trace start"};
  14 cvar_t collision_endnudge = {0, "collision_endnudge", "0", "how much to bias collision trace end"};
  15 cvar_t collision_enternudge = {0, "collision_enternudge", "0", "how much to bias collision entry fraction"};
  16 cvar_t collision_leavenudge = {0, "collision_leavenudge", "0", "how much to bias collision exit fraction"};
  17 cvar_t collision_prefernudgedfraction = {0, "collision_prefernudgedfraction", "1", "whether to sort collision events by nudged fraction (1) or real fraction (0)"};
  18 #ifdef COLLISION_STUPID_TRACE_ENDPOS_IN_SOLID_WORKAROUND
  19 cvar_t collision_endposnudge = {0, "collision_endposnudge", "0", "workaround to fix trace_endpos sometimes being returned where it would be inside solid by making that collision hit (recommended: values like 1)"};
  20 #endif
  21 cvar_t collision_debug_tracelineasbox = {0, "collision_debug_tracelineasbox", "0", "workaround for any bugs in Collision_TraceLineBrushFloat by using Collision_TraceBrushBrushFloat"};
  22 cvar_t collision_cache = {0, "collision_cache", "1", "store results of collision traces for next frame to reuse if possible (optimization)"};
  23
  24 mempool_t *collision_mempool;
  25
  26 void Collision_Init (void)
  27 {
  28         Cvar_RegisterVariable(&collision_impactnudge);
  29         Cvar_RegisterVariable(&collision_startnudge);
  30         Cvar_RegisterVariable(&collision_endnudge);
  31         Cvar_RegisterVariable(&collision_enternudge);
  32         Cvar_RegisterVariable(&collision_leavenudge);
  33         Cvar_RegisterVariable(&collision_prefernudgedfraction);
  34 #ifdef COLLISION_STUPID_TRACE_ENDPOS_IN_SOLID_WORKAROUND
  35         Cvar_RegisterVariable(&collision_endposnudge);
  36 #endif
  37         Cvar_RegisterVariable(&collision_debug_tracelineasbox);
  38         Cvar_RegisterVariable(&collision_cache);
  39         collision_mempool = Mem_AllocPool("collision cache", 0, NULL);
  40         Collision_Cache_Init(collision_mempool);
  41 }
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56 static void Collision_PrintBrushAsQHull(colbrushf_t *brush, const char *name)
  57 {
  58         int i;
  59         Con_Printf("3 %s\n%i\n", name, brush->numpoints);
  60         for (i = 0;i < brush->numpoints;i++)
  61                 Con_Printf("%f %f %f\n", brush->points[i].v[0], brush->points[i].v[1], brush->points[i].v[2]);
  62         // FIXME: optimize!
  63         Con_Printf("4\n%i\n", brush->numplanes);
  64         for (i = 0;i < brush->numplanes;i++)
  65                 Con_Printf("%f %f %f %f\n", brush->planes[i].normal[0], brush->planes[i].normal[1], brush->planes[i].normal[2], brush->planes[i].dist);
  66 }
  67
  68 static void Collision_ValidateBrush(colbrushf_t *brush)
  69 {
  70         int j, k, pointsoffplanes, pointonplanes, pointswithinsufficientplanes, printbrush;
  71         float d;
  72         printbrush = false;
  73         if (!brush->numpoints)
  74         {
  75                 Con_Print("Collision_ValidateBrush: brush with no points!\n");
  76                 printbrush = true;
  77         }
  78 #if 0
  79         // it's ok for a brush to have one point and no planes...
  80         if (brush->numplanes == 0 && brush->numpoints != 1)
  81         {
  82                 Con_Print("Collision_ValidateBrush: brush with no planes and more than one point!\n");
  83                 printbrush = true;
  84         }
  85 #endif
  86         if (brush->numplanes)
  87         {
  88                 pointsoffplanes = 0;
  89                 pointswithinsufficientplanes = 0;
  90                 for (k = 0;k < brush->numplanes;k++)
  91                         if (DotProduct(brush->planes[k].normal, brush->planes[k].normal) < 0.0001f)
  92                                 Con_Printf("Collision_ValidateBrush: plane #%i (%f %f %f %f) is degenerate\n", k, brush->planes[k].normal[0], brush->planes[k].normal[1], brush->planes[k].normal[2], brush->planes[k].dist);
  93                 for (j = 0;j < brush->numpoints;j++)
  94                 {
  95                         pointonplanes = 0;
  96                         for (k = 0;k < brush->numplanes;k++)
  97                         {
  98                                 d = DotProduct(brush->points[j].v, brush->planes[k].normal) - brush->planes[k].dist;
  99                                 if (d > COLLISION_PLANE_DIST_EPSILON)
 100                                 {
 101                                         Con_Printf("Collision_ValidateBrush: point #%i (%f %f %f) infront of plane #%i (%f %f %f %f)\n", j, brush->points[j].v[0], brush->points[j].v[1], brush->points[j].v[2], k, brush->planes[k].normal[0], brush->planes[k].normal[1], brush->planes[k].normal[2], brush->planes[k].dist);
 102                                         printbrush = true;
 103                                 }
 104                                 if (fabs(d) > COLLISION_PLANE_DIST_EPSILON)
 105                                         pointsoffplanes++;
 106                                 else
 107                                         pointonplanes++;
 108                         }
 109                         if (pointonplanes < 3)
 110                                 pointswithinsufficientplanes++;
 111                 }
 112                 if (pointswithinsufficientplanes)
 113                 {
 114                         Con_Print("Collision_ValidateBrush: some points have insufficient planes, every point must be on at least 3 planes to form a corner.\n");
 115                         printbrush = true;
 116                 }
 117                 if (pointsoffplanes == 0) // all points are on all planes
 118                 {
 119                         Con_Print("Collision_ValidateBrush: all points lie on all planes (degenerate, no brush volume!)\n");
 120                         printbrush = true;
 121                 }
 122         }
 123         if (printbrush)
 124                 Collision_PrintBrushAsQHull(brush, "unnamed");
 125 }
 126
 127 static float nearestplanedist_float(const float *normal, const colpointf_t *points, int numpoints)
 128 {
 129         float dist, bestdist;
 130         if (!numpoints)
 131                 return 0;
 132         bestdist = DotProduct(points->v, normal);
 133         points++;
 134         while(--numpoints)
 135         {
 136                 dist = DotProduct(points->v, normal);
 137                 bestdist = min(bestdist, dist);
 138                 points++;
 139         }
 140         return bestdist;
 141 }
 142
 143 static float furthestplanedist_float(const float *normal, const colpointf_t *points, int numpoints)
 144 {
 145         float dist, bestdist;
 146         if (!numpoints)
 147                 return 0;
 148         bestdist = DotProduct(points->v, normal);
 149         points++;
 150         while(--numpoints)
 151         {
 152                 dist = DotProduct(points->v, normal);
 153                 bestdist = max(bestdist, dist);
 154                 points++;
 155         }
 156         return bestdist;
 157 }
 158
 159 static void Collision_CalcEdgeDirsForPolygonBrushFloat(colbrushf_t *brush)
 160 {
 161         int i, j;
 162         for (i = 0, j = brush->numpoints - 1;i < brush->numpoints;j = i, i++)
 163                 VectorSubtract(brush->points[i].v, brush->points[j].v, brush->edgedirs[j].v);
 164 }
 165
 166 colbrushf_t *Collision_NewBrushFromPlanes(mempool_t *mempool, int numoriginalplanes, const colplanef_t *originalplanes, int supercontents, int q3surfaceflags, const texture_t *texture, int hasaabbplanes)
 167 {
 168         // TODO: planesbuf could be replaced by a remapping table
 169         int j, k, l, m, w, xyzflags;
 170         int numpointsbuf = 0, maxpointsbuf = 256, numedgedirsbuf = 0, maxedgedirsbuf = 256, numplanesbuf = 0, maxplanesbuf = 256, numelementsbuf = 0, maxelementsbuf = 256;
 171         int isaabb = true;
 172         double maxdist;
 173         colbrushf_t *brush;
 174         colpointf_t pointsbuf[256];
 175         colpointf_t edgedirsbuf[256];
 176         colplanef_t planesbuf[256];
 177         int elementsbuf[1024];
 178         int polypointbuf[256];
 179         int pmaxpoints = 64;
 180         int pnumpoints;
 181         double p[2][3*64];
 182 #if 0
 183         // enable these if debugging to avoid seeing garbage in unused data-
 184         memset(pointsbuf, 0, sizeof(pointsbuf));
 185         memset(edgedirsbuf, 0, sizeof(edgedirsbuf));
 186         memset(planesbuf, 0, sizeof(planesbuf));
 187         memset(elementsbuf, 0, sizeof(elementsbuf));
 188         memset(polypointbuf, 0, sizeof(polypointbuf));
 189         memset(p, 0, sizeof(p));
 190 #endif
 191
 192         // check if there are too many planes and skip the brush
 193         if (numoriginalplanes >= maxplanesbuf)
 194         {
 195                 Con_DPrint("Collision_NewBrushFromPlanes: failed to build collision brush: too many planes for buffer\n");
 196                 return NULL;
 197         }
 198
 199         // figure out how large a bounding box we need to properly compute this brush
 200         maxdist = 0;
 201         for (j = 0;j < numoriginalplanes;j++)
 202                 maxdist = max(maxdist, fabs(originalplanes[j].dist));
 203         // now make it large enough to enclose the entire brush, and round it off to a reasonable multiple of 1024
 204         maxdist = floor(maxdist * (4.0 / 1024.0) + 2) * 1024.0;
 205         // construct a collision brush (points, planes, and renderable mesh) from
 206         // a set of planes, this also optimizes out any unnecessary planes (ones
 207         // whose polygon is clipped away by the other planes)
 208         for (j = 0;j < numoriginalplanes;j++)
 209         {
 210                 // add the new plane
 211                 VectorCopy(originalplanes[j].normal, planesbuf[numplanesbuf].normal);
 212                 planesbuf[numplanesbuf].dist = originalplanes[j].dist;
 213                 planesbuf[numplanesbuf].q3surfaceflags = originalplanes[j].q3surfaceflags;
 214                 planesbuf[numplanesbuf].texture = originalplanes[j].texture;
 215                 numplanesbuf++;
 216
 217                 // create a large polygon from the plane
 218                 w = 0;
 219                 PolygonD_QuadForPlane(p[w], originalplanes[j].normal[0], originalplanes[j].normal[1], originalplanes[j].normal[2], originalplanes[j].dist, maxdist);
 220                 pnumpoints = 4;
 221                 // clip it by all other planes
 222                 for (k = 0;k < numoriginalplanes && pnumpoints >= 3 && pnumpoints <= pmaxpoints;k++)
 223                 {
 224                         // skip the plane this polygon
 225                         // (nothing happens if it is processed, this is just an optimization)
 226                         if (k != j)
 227                         {
 228                                 // we want to keep the inside of the brush plane so we flip
 229                                 // the cutting plane
 230                                 PolygonD_Divide(pnumpoints, p[w], -originalplanes[k].normal[0], -originalplanes[k].normal[1], -originalplanes[k].normal[2], -originalplanes[k].dist, COLLISION_PLANE_DIST_EPSILON, pmaxpoints, p[!w], &pnumpoints, 0, NULL, NULL, NULL);
 231                                 w = !w;
 232                         }
 233                 }
 234
 235                 // if nothing is left, skip it
 236                 if (pnumpoints < 3)
 237                 {
 238                         //Con_DPrintf("Collision_NewBrushFromPlanes: warning: polygon for plane %f %f %f %f clipped away\n", originalplanes[j].normal[0], originalplanes[j].normal[1], originalplanes[j].normal[2], originalplanes[j].dist);
 239                         continue;
 240                 }
 241
 242                 for (k = 0;k < pnumpoints;k++)
 243                 {
 244                         int l, m;
 245                         m = 0;
 246                         for (l = 0;l < numoriginalplanes;l++)
 247                                 if (fabs(DotProduct(&p[w][k*3], originalplanes[l].normal) - originalplanes[l].dist) < COLLISION_PLANE_DIST_EPSILON)
 248                                         m++;
 249                         if (m < 3)
 250                                 break;
 251                 }
 252                 if (k < pnumpoints)
 253                 {
 254                         Con_DPrintf("Collision_NewBrushFromPlanes: warning: polygon point does not lie on at least 3 planes\n");
 255                         //return NULL;
 256                 }
 257
 258                 // check if there are too many polygon vertices for buffer
 259                 if (pnumpoints > pmaxpoints)
 260                 {
 261                         Con_DPrint("Collision_NewBrushFromPlanes: failed to build collision brush: too many points for buffer\n");
 262                         return NULL;
 263                 }
 264
 265                 // check if there are too many triangle elements for buffer
 266                 if (numelementsbuf + (pnumpoints - 2) * 3 > maxelementsbuf)
 267                 {
 268                         Con_DPrint("Collision_NewBrushFromPlanes: failed to build collision brush: too many triangle elements for buffer\n");
 269                         return NULL;
 270                 }
 271
 272                 // add the unique points for this polygon
 273                 for (k = 0;k < pnumpoints;k++)
 274                 {
 275                         float v[3];
 276                         // downgrade to float precision before comparing
 277                         VectorCopy(&p[w][k*3], v);
 278
 279                         // check if there is already a matching point (no duplicates)
 280                         for (m = 0;m < numpointsbuf;m++)
 281                                 if (VectorDistance2(v, pointsbuf[m].v) < COLLISION_SNAP2)
 282                                         break;
 283
 284                         // if there is no match, add a new one
 285                         if (m == numpointsbuf)
 286                         {
 287                                 // check if there are too many and skip the brush
 288                                 if (numpointsbuf >= maxpointsbuf)
 289                                 {
 290                                         Con_DPrint("Collision_NewBrushFromPlanes: failed to build collision brush: too many points for buffer\n");
 291                                         return NULL;
 292                                 }
 293                                 // add the new one
 294                                 VectorCopy(&p[w][k*3], pointsbuf[numpointsbuf].v);
 295                                 numpointsbuf++;
 296                         }
 297
 298                         // store the index into a buffer
 299                         polypointbuf[k] = m;
 300                 }
 301
 302                 // add the triangles for the polygon
 303                 // (this particular code makes a triangle fan)
 304                 for (k = 0;k < pnumpoints - 2;k++)
 305                 {
 306                         elementsbuf[numelementsbuf++] = polypointbuf[0];
 307                         elementsbuf[numelementsbuf++] = polypointbuf[k + 1];
 308                         elementsbuf[numelementsbuf++] = polypointbuf[k + 2];
 309                 }
 310
 311                 // add the unique edgedirs for this polygon
 312                 for (k = 0, l = pnumpoints-1;k < pnumpoints;l = k, k++)
 313                 {
 314                         float dir[3];
 315                         // downgrade to float precision before comparing
 316                         VectorSubtract(&p[w][k*3], &p[w][l*3], dir);
 317                         VectorNormalize(dir);
 318
 319                         // check if there is already a matching edgedir (no duplicates)
 320                         for (m = 0;m < numedgedirsbuf;m++)
 321                                 if (DotProduct(dir, edgedirsbuf[m].v) >= COLLISION_EDGEDIR_DOT_EPSILON)
 322                                         break;
 323                         // skip this if there is
 324                         if (m < numedgedirsbuf)
 325                                 continue;
 326
 327                         // try again with negated edgedir
 328                         VectorNegate(dir, dir);
 329                         // check if there is already a matching edgedir (no duplicates)
 330                         for (m = 0;m < numedgedirsbuf;m++)
 331                                 if (DotProduct(dir, edgedirsbuf[m].v) >= COLLISION_EDGEDIR_DOT_EPSILON)
 332                                         break;
 333                         // if there is no match, add a new one
 334                         if (m == numedgedirsbuf)
 335                         {
 336                                 // check if there are too many and skip the brush
 337                                 if (numedgedirsbuf >= maxedgedirsbuf)
 338                                 {
 339                                         Con_DPrint("Collision_NewBrushFromPlanes: failed to build collision brush: too many edgedirs for buffer\n");
 340                                         return NULL;
 341                                 }
 342                                 // add the new one
 343                                 VectorCopy(dir, edgedirsbuf[numedgedirsbuf].v);
 344                                 numedgedirsbuf++;
 345                         }
 346                 }
 347
 348                 // if any normal is not purely axial, it's not an axis-aligned box
 349                 if (isaabb && (originalplanes[j].normal[0] == 0) + (originalplanes[j].normal[1] == 0) + (originalplanes[j].normal[2] == 0) < 2)
 350                         isaabb = false;
 351         }
 352
 353         // if nothing is left, there's nothing to allocate
 354         if (numplanesbuf < 4)
 355         {
 356                 Con_DPrintf("Collision_NewBrushFromPlanes: failed to build collision brush: %i triangles, %i planes (input was %i planes), %i vertices\n", numelementsbuf / 3, numplanesbuf, numoriginalplanes, numpointsbuf);
 357                 return NULL;
 358         }
 359
 360         // if no triangles or points could be constructed, then this routine failed but the brush is not discarded
 361         if (numelementsbuf < 12 || numpointsbuf < 4)
 362                 Con_DPrintf("Collision_NewBrushFromPlanes: unable to rebuild triangles/points for collision brush: %i triangles, %i planes (input was %i planes), %i vertices\n", numelementsbuf / 3, numplanesbuf, numoriginalplanes, numpointsbuf);
 363
 364         // validate plane distances
 365         for (j = 0;j < numplanesbuf;j++)
 366         {
 367                 float d = furthestplanedist_float(planesbuf[j].normal, pointsbuf, numpointsbuf);
 368                 if (fabs(planesbuf[j].dist - d) > COLLISION_PLANE_DIST_EPSILON)
 369                         Con_DPrintf("plane %f %f %f %f mismatches dist %f\n", planesbuf[j].normal[0], planesbuf[j].normal[1], planesbuf[j].normal[2], planesbuf[j].dist, d);
 370         }
 371
 372         // allocate the brush and copy to it
 373         brush = (colbrushf_t *)Mem_Alloc(mempool, sizeof(colbrushf_t) + sizeof(colpointf_t) * numpointsbuf + sizeof(colpointf_t) * numedgedirsbuf + sizeof(colplanef_t) * numplanesbuf + sizeof(int) * numelementsbuf);
 374         brush->isaabb = isaabb;
 375         brush->hasaabbplanes = hasaabbplanes;
 376         brush->supercontents = supercontents;
 377         brush->numplanes = numplanesbuf;
 378         brush->numedgedirs = numedgedirsbuf;
 379         brush->numpoints = numpointsbuf;
 380         brush->numtriangles = numelementsbuf / 3;
 381         brush->planes = (colplanef_t *)(brush + 1);
 382         brush->points = (colpointf_t *)(brush->planes + brush->numplanes);
 383         brush->edgedirs = (colpointf_t *)(brush->points + brush->numpoints);
 384         brush->elements = (int *)(brush->points + brush->numpoints);
 385         brush->q3surfaceflags = q3surfaceflags;
 386         brush->texture = texture;
 387         for (j = 0;j < brush->numpoints;j++)
 388         {
 389                 brush->points[j].v[0] = pointsbuf[j].v[0];
 390                 brush->points[j].v[1] = pointsbuf[j].v[1];
 391                 brush->points[j].v[2] = pointsbuf[j].v[2];
 392         }
 393         for (j = 0;j < brush->numedgedirs;j++)
 394         {
 395                 brush->edgedirs[j].v[0] = edgedirsbuf[j].v[0];
 396                 brush->edgedirs[j].v[1] = edgedirsbuf[j].v[1];
 397                 brush->edgedirs[j].v[2] = edgedirsbuf[j].v[2];
 398         }
 399         for (j = 0;j < brush->numplanes;j++)
 400         {
 401                 brush->planes[j].normal[0] = planesbuf[j].normal[0];
 402                 brush->planes[j].normal[1] = planesbuf[j].normal[1];
 403                 brush->planes[j].normal[2] = planesbuf[j].normal[2];
 404                 brush->planes[j].dist = planesbuf[j].dist;
 405                 brush->planes[j].q3surfaceflags = planesbuf[j].q3surfaceflags;
 406                 brush->planes[j].texture = planesbuf[j].texture;
 407         }
 408         for (j = 0;j < brush->numtriangles * 3;j++)
 409                 brush->elements[j] = elementsbuf[j];
 410
 411         xyzflags = 0;
 412         VectorClear(brush->mins);
 413         VectorClear(brush->maxs);
 414         for (j = 0;j < min(6, numoriginalplanes);j++)
 415         {
 416                      if (originalplanes[j].normal[0] ==  1) {xyzflags |=  1;brush->maxs[0] =  originalplanes[j].dist;}
 417                 else if (originalplanes[j].normal[0] == -1) {xyzflags |=  2;brush->mins[0] = -originalplanes[j].dist;}
 418                 else if (originalplanes[j].normal[1] ==  1) {xyzflags |=  4;brush->maxs[1] =  originalplanes[j].dist;}
 419                 else if (originalplanes[j].normal[1] == -1) {xyzflags |=  8;brush->mins[1] = -originalplanes[j].dist;}
 420                 else if (originalplanes[j].normal[2] ==  1) {xyzflags |= 16;brush->maxs[2] =  originalplanes[j].dist;}
 421                 else if (originalplanes[j].normal[2] == -1) {xyzflags |= 32;brush->mins[2] = -originalplanes[j].dist;}
 422         }
 423         // if not all xyzflags were set, then this is not a brush from q3map/q3map2, and needs reconstruction of the bounding box
 424         // (this case works for any brush with valid points, but sometimes brushes are not reconstructed properly and hence the points are not valid, so this is reserved as a fallback case)
 425         if (xyzflags != 63)
 426         {
 427                 VectorCopy(brush->points[0].v, brush->mins);
 428                 VectorCopy(brush->points[0].v, brush->maxs);
 429                 for (j = 1;j < brush->numpoints;j++)
 430                 {
 431                         brush->mins[0] = min(brush->mins[0], brush->points[j].v[0]);
 432                         brush->mins[1] = min(brush->mins[1], brush->points[j].v[1]);
 433                         brush->mins[2] = min(brush->mins[2], brush->points[j].v[2]);
 434                         brush->maxs[0] = max(brush->maxs[0], brush->points[j].v[0]);
 435                         brush->maxs[1] = max(brush->maxs[1], brush->points[j].v[1]);
 436                         brush->maxs[2] = max(brush->maxs[2], brush->points[j].v[2]);
 437                 }
 438         }
 439         brush->mins[0] -= 1;
 440         brush->mins[1] -= 1;
 441         brush->mins[2] -= 1;
 442         brush->maxs[0] += 1;
 443         brush->maxs[1] += 1;
 444         brush->maxs[2] += 1;
 445         Collision_ValidateBrush(brush);
 446         return brush;
 447 }
 448
 449
 450
 451 void Collision_CalcPlanesForPolygonBrushFloat(colbrushf_t *brush)
 452 {
 453         int i;
 454         float edge0[3], edge1[3], edge2[3], normal[3], dist, bestdist;
 455         colpointf_t *p, *p2;
 456
 457         // FIXME: these probably don't actually need to be normalized if the collision code does not care
 458         if (brush->numpoints == 3)
 459         {
 460                 // optimized triangle case
 461                 TriangleNormal(brush->points[0].v, brush->points[1].v, brush->points[2].v, brush->planes[0].normal);
 462                 if (DotProduct(brush->planes[0].normal, brush->planes[0].normal) < 0.0001f)
 463                 {
 464                         // there's no point in processing a degenerate triangle (GIGO - Garbage In, Garbage Out)
 465                         brush->numplanes = 0;
 466                         return;
 467                 }
 468                 else
 469                 {
 470                         brush->numplanes = 5;
 471                         brush->numedgedirs = 3;
 472                         VectorNormalize(brush->planes[0].normal);
 473                         brush->planes[0].dist = DotProduct(brush->points->v, brush->planes[0].normal);
 474                         VectorNegate(brush->planes[0].normal, brush->planes[1].normal);
 475                         brush->planes[1].dist = -brush->planes[0].dist;
 476                         VectorSubtract(brush->points[2].v, brush->points[0].v, edge0);
 477                         VectorSubtract(brush->points[0].v, brush->points[1].v, edge1);
 478                         VectorSubtract(brush->points[1].v, brush->points[2].v, edge2);
 479                         VectorCopy(edge0, brush->edgedirs[0].v);
 480                         VectorCopy(edge1, brush->edgedirs[1].v);
 481                         VectorCopy(edge2, brush->edgedirs[2].v);
 482 #if 1
 483                         {
 484                                 float projectionnormal[3], projectionedge0[3], projectionedge1[3], projectionedge2[3];
 485                                 int i, best;
 486                                 float dist, bestdist;
 487                                 bestdist = fabs(brush->planes[0].normal[0]);
 488                                 best = 0;
 489                                 for (i = 1;i < 3;i++)
 490                                 {
 491                                         dist = fabs(brush->planes[0].normal[i]);
 492                                         if (bestdist < dist)
 493                                         {
 494                                                 bestdist = dist;
 495                                                 best = i;
 496                                         }
 497                                 }
 498                                 VectorClear(projectionnormal);
 499                                 if (brush->planes[0].normal[best] < 0)
 500                                         projectionnormal[best] = -1;
 501                                 else
 502                                         projectionnormal[best] = 1;
 503                                 VectorCopy(edge0, projectionedge0);
 504                                 VectorCopy(edge1, projectionedge1);
 505                                 VectorCopy(edge2, projectionedge2);
 506                                 projectionedge0[best] = 0;
 507                                 projectionedge1[best] = 0;
 508                                 projectionedge2[best] = 0;
 509                                 CrossProduct(projectionedge0, projectionnormal, brush->planes[2].normal);
 510                                 CrossProduct(projectionedge1, projectionnormal, brush->planes[3].normal);
 511                                 CrossProduct(projectionedge2, projectionnormal, brush->planes[4].normal);
 512                         }
 513 #else
 514                         CrossProduct(edge0, brush->planes->normal, brush->planes[2].normal);
 515                         CrossProduct(edge1, brush->planes->normal, brush->planes[3].normal);
 516                         CrossProduct(edge2, brush->planes->normal, brush->planes[4].normal);
 517 #endif
 518                         VectorNormalize(brush->planes[2].normal);
 519                         VectorNormalize(brush->planes[3].normal);
 520                         VectorNormalize(brush->planes[4].normal);
 521                         brush->planes[2].dist = DotProduct(brush->points[2].v, brush->planes[2].normal);
 522                         brush->planes[3].dist = DotProduct(brush->points[0].v, brush->planes[3].normal);
 523                         brush->planes[4].dist = DotProduct(brush->points[1].v, brush->planes[4].normal);
 524
 525                         if (developer_extra.integer)
 526                         {
 527                                 // validation code
 528 #if 0
 529                                 float temp[3];
 530
 531                                 VectorSubtract(brush->points[0].v, brush->points[1].v, edge0);
 532                                 VectorSubtract(brush->points[2].v, brush->points[1].v, edge1);
 533                                 CrossProduct(edge0, edge1, normal);
 534                                 VectorNormalize(normal);
 535                                 VectorSubtract(normal, brush->planes[0].normal, temp);
 536                                 if (VectorLength(temp) > 0.01f)
 537                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: TriangleNormal gave wrong answer (%f %f %f != correct answer %f %f %f)\n", brush->planes->normal[0], brush->planes->normal[1], brush->planes->normal[2], normal[0], normal[1], normal[2]);
 538                                 if (fabs(DotProduct(brush->planes[1].normal, brush->planes[0].normal) - -1.0f) > 0.01f || fabs(brush->planes[1].dist - -brush->planes[0].dist) > 0.01f)
 539                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 1 (%f %f %f %f) is not opposite plane 0 (%f %f %f %f)\n", brush->planes[1].normal[0], brush->planes[1].normal[1], brush->planes[1].normal[2], brush->planes[1].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[0].dist);
 540 #if 0
 541                                 if (fabs(DotProduct(brush->planes[2].normal, brush->planes[0].normal)) > 0.01f)
 542                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 2 (%f %f %f %f) is not perpendicular to plane 0 (%f %f %f %f)\n", brush->planes[2].normal[0], brush->planes[2].normal[1], brush->planes[2].normal[2], brush->planes[2].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[2].dist);
 543                                 if (fabs(DotProduct(brush->planes[3].normal, brush->planes[0].normal)) > 0.01f)
 544                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 3 (%f %f %f %f) is not perpendicular to plane 0 (%f %f %f %f)\n", brush->planes[3].normal[0], brush->planes[3].normal[1], brush->planes[3].normal[2], brush->planes[3].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[3].dist);
 545                                 if (fabs(DotProduct(brush->planes[4].normal, brush->planes[0].normal)) > 0.01f)
 546                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 4 (%f %f %f %f) is not perpendicular to plane 0 (%f %f %f %f)\n", brush->planes[4].normal[0], brush->planes[4].normal[1], brush->planes[4].normal[2], brush->planes[4].dist, brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[4].dist);
 547                                 if (fabs(DotProduct(brush->planes[2].normal, edge0)) > 0.01f)
 548                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 2 (%f %f %f %f) is not perpendicular to edge 0 (%f %f %f to %f %f %f)\n", brush->planes[2].normal[0], brush->planes[2].normal[1], brush->planes[2].normal[2], brush->planes[2].dist, brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2]);
 549                                 if (fabs(DotProduct(brush->planes[3].normal, edge1)) > 0.01f)
 550                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 3 (%f %f %f %f) is not perpendicular to edge 1 (%f %f %f to %f %f %f)\n", brush->planes[3].normal[0], brush->planes[3].normal[1], brush->planes[3].normal[2], brush->planes[3].dist, brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2]);
 551                                 if (fabs(DotProduct(brush->planes[4].normal, edge2)) > 0.01f)
 552                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: plane 4 (%f %f %f %f) is not perpendicular to edge 2 (%f %f %f to %f %f %f)\n", brush->planes[4].normal[0], brush->planes[4].normal[1], brush->planes[4].normal[2], brush->planes[4].dist, brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2]);
 553 #endif
 554 #endif
 555                                 if (fabs(DotProduct(brush->points[0].v, brush->planes[0].normal) - brush->planes[0].dist) > 0.01f || fabs(DotProduct(brush->points[1].v, brush->planes[0].normal) - brush->planes[0].dist) > 0.01f || fabs(DotProduct(brush->points[2].v, brush->planes[0].normal) - brush->planes[0].dist) > 0.01f)
 556                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: edges (%f %f %f to %f %f %f to %f %f %f) off front plane 0 (%f %f %f %f)\n", brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->planes[0].normal[0], brush->planes[0].normal[1], brush->planes[0].normal[2], brush->planes[0].dist);
 557                                 if (fabs(DotProduct(brush->points[0].v, brush->planes[1].normal) - brush->planes[1].dist) > 0.01f || fabs(DotProduct(brush->points[1].v, brush->planes[1].normal) - brush->planes[1].dist) > 0.01f || fabs(DotProduct(brush->points[2].v, brush->planes[1].normal) - brush->planes[1].dist) > 0.01f)
 558                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: edges (%f %f %f to %f %f %f to %f %f %f) off back plane 1 (%f %f %f %f)\n", brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->planes[1].normal[0], brush->planes[1].normal[1], brush->planes[1].normal[2], brush->planes[1].dist);
 559                                 if (fabs(DotProduct(brush->points[2].v, brush->planes[2].normal) - brush->planes[2].dist) > 0.01f || fabs(DotProduct(brush->points[0].v, brush->planes[2].normal) - brush->planes[2].dist) > 0.01f)
 560                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: edge 0 (%f %f %f to %f %f %f) off front plane 2 (%f %f %f %f)\n", brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->planes[2].normal[0], brush->planes[2].normal[1], brush->planes[2].normal[2], brush->planes[2].dist);
 561                                 if (fabs(DotProduct(brush->points[0].v, brush->planes[3].normal) - brush->planes[3].dist) > 0.01f || fabs(DotProduct(brush->points[1].v, brush->planes[3].normal) - brush->planes[3].dist) > 0.01f)
 562                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: edge 0 (%f %f %f to %f %f %f) off front plane 2 (%f %f %f %f)\n", brush->points[0].v[0], brush->points[0].v[1], brush->points[0].v[2], brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->planes[3].normal[0], brush->planes[3].normal[1], brush->planes[3].normal[2], brush->planes[3].dist);
 563                                 if (fabs(DotProduct(brush->points[1].v, brush->planes[4].normal) - brush->planes[4].dist) > 0.01f || fabs(DotProduct(brush->points[2].v, brush->planes[4].normal) - brush->planes[4].dist) > 0.01f)
 564                                         Con_DPrintf("Collision_CalcPlanesForPolygonBrushFloat: edge 0 (%f %f %f to %f %f %f) off front plane 2 (%f %f %f %f)\n", brush->points[1].v[0], brush->points[1].v[1], brush->points[1].v[2], brush->points[2].v[0], brush->points[2].v[1], brush->points[2].v[2], brush->planes[4].normal[0], brush->planes[4].normal[1], brush->planes[4].normal[2], brush->planes[4].dist);
 565                         }
 566                 }
 567         }
 568         else
 569         {
 570                 // choose best surface normal for polygon's plane
 571                 bestdist = 0;
 572                 for (i = 0, p = brush->points + 1;i < brush->numpoints - 2;i++, p++)
 573                 {
 574                         VectorSubtract(p[-1].v, p[0].v, edge0);
 575                         VectorSubtract(p[1].v, p[0].v, edge1);
 576                         CrossProduct(edge0, edge1, normal);
 577                         //TriangleNormal(p[-1].v, p[0].v, p[1].v, normal);
 578                         dist = DotProduct(normal, normal);
 579                         if (i == 0 || bestdist < dist)
 580                         {
 581                                 bestdist = dist;
 582                                 VectorCopy(normal, brush->planes->normal);
 583                         }
 584                 }
 585                 if (bestdist < 0.0001f)
 586                 {
 587                         // there's no point in processing a degenerate triangle (GIGO - Garbage In, Garbage Out)
 588                         brush->numplanes = 0;
 589                         return;
 590                 }
 591                 else
 592                 {
 593                         brush->numplanes = brush->numpoints + 2;
 594                         VectorNormalize(brush->planes->normal);
 595                         brush->planes->dist = DotProduct(brush->points->v, brush->planes->normal);
 596
 597                         // negate plane to create other side
 598                         VectorNegate(brush->planes[0].normal, brush->planes[1].normal);
 599                         brush->planes[1].dist = -brush->planes[0].dist;
 600                         for (i = 0, p = brush->points + (brush->numpoints - 1), p2 = brush->points;i < brush->numpoints;i++, p = p2, p2++)
 601                         {
 602                                 VectorSubtract(p->v, p2->v, edge0);
 603                                 CrossProduct(edge0, brush->planes->normal, brush->planes[i + 2].normal);
 604                                 VectorNormalize(brush->planes[i + 2].normal);
 605                                 brush->planes[i + 2].dist = DotProduct(p->v, brush->planes[i + 2].normal);
 606                         }
 607                 }
 608         }
 609
 610         if (developer_extra.integer)
 611         {
 612                 // validity check - will be disabled later
 613                 Collision_ValidateBrush(brush);
 614                 for (i = 0;i < brush->numplanes;i++)
 615                 {
 616                         int j;
 617                         for (j = 0, p = brush->points;j < brush->numpoints;j++, p++)
 618                                 if (DotProduct(p->v, brush->planes[i].normal) > brush->planes[i].dist + COLLISION_PLANE_DIST_EPSILON)
 619                                         Con_DPrintf("Error in brush plane generation, plane %i\n", i);
 620                 }
 621         }
 622 }
 623
 624 colbrushf_t *Collision_AllocBrushFromPermanentPolygonFloat(mempool_t *mempool, int numpoints, float *points, int supercontents, int q3surfaceflags, const texture_t *texture)
 625 {
 626         colbrushf_t *brush;
 627         brush = (colbrushf_t *)Mem_Alloc(mempool, sizeof(colbrushf_t) + sizeof(colplanef_t) * (numpoints + 2) + sizeof(colpointf_t) * numpoints);
 628         brush->isaabb = false;
 629         brush->hasaabbplanes = false;
 630         brush->supercontents = supercontents;
 631         brush->numpoints = numpoints;
 632         brush->numedgedirs = numpoints;
 633         brush->numplanes = numpoints + 2;
 634         brush->planes = (colplanef_t *)(brush + 1);
 635         brush->points = (colpointf_t *)points;
 636         brush->edgedirs = (colpointf_t *)(brush->planes + brush->numplanes);
 637         brush->q3surfaceflags = q3surfaceflags;
 638         brush->texture = texture;
 639         Sys_Error("Collision_AllocBrushFromPermanentPolygonFloat: FIXME: this code needs to be updated to generate a mesh...");
 640         return brush;
 641 }
 642
 643 // NOTE: start and end of each brush pair must have same numplanes/numpoints
 644 void Collision_TraceBrushBrushFloat(trace_t *trace, const colbrushf_t *trace_start, const colbrushf_t *trace_end, const colbrushf_t *other_start, const colbrushf_t *other_end)
 645 {
 646         int nplane, nplane2, nedge1, nedge2, hitq3surfaceflags = 0;
 647         int tracenumedgedirs = trace_start->numedgedirs;
 648         //int othernumedgedirs = other_start->numedgedirs;
 649         int tracenumpoints = trace_start->numpoints;
 650         int othernumpoints = other_start->numpoints;
 651         int numplanes1 = other_start->numplanes;
 652         int numplanes2 = numplanes1 + trace_start->numplanes;
 653         int numplanes3 = numplanes2 + trace_start->numedgedirs * other_start->numedgedirs * 2;
 654         vec_t enterfrac = -1, leavefrac = 1, startdist, enddist, ie, f, imove, enterfrac2 = -1;
 655         vec4_t startplane;
 656         vec4_t endplane;
 657         vec4_t newimpactplane;
 658         const texture_t *hittexture = NULL;
 659         vec_t startdepth = 1;
 660         vec3_t startdepthnormal;
 661
 662         VectorClear(startdepthnormal);
 663         Vector4Clear(newimpactplane);
 664
 665         // fast case for AABB vs compiled brushes (which begin with AABB planes and also have precomputed bevels for AABB collisions)
 666         if (trace_start->isaabb && other_start->hasaabbplanes)
 667                 numplanes3 = numplanes2 = numplanes1;
 668
 669         // Separating Axis Theorem:
 670         // if a supporting vector (plane normal) can be found that separates two
 671         // objects, they are not colliding.
 672         //
 673         // Minkowski Sum:
 674         // reduce the size of one object to a point while enlarging the other to
 675         // represent the space that point can not occupy.
 676         //
 677         // try every plane we can construct between the two brushes and measure
 678         // the distance between them.
 679         for (nplane = 0;nplane < numplanes3;nplane++)
 680         {
 681                 if (nplane < numplanes1)
 682                 {
 683                         nplane2 = nplane;
 684                         VectorCopy(other_start->planes[nplane2].normal, startplane);
 685                         VectorCopy(other_end->planes[nplane2].normal, endplane);
 686                 }
 687                 else if (nplane < numplanes2)
 688                 {
 689                         nplane2 = nplane - numplanes1;
 690                         VectorCopy(trace_start->planes[nplane2].normal, startplane);
 691                         VectorCopy(trace_end->planes[nplane2].normal, endplane);
 692                 }
 693                 else
 694                 {
 695                         // pick an edgedir from each brush and cross them
 696                         nplane2 = nplane - numplanes2;
 697                         nedge1 = nplane2 >> 1;
 698                         nedge2 = nedge1 / tracenumedgedirs;
 699                         nedge1 -= nedge2 * tracenumedgedirs;
 700                         if (nplane2 & 1)
 701                         {
 702                                 CrossProduct(trace_start->edgedirs[nedge1].v, other_start->edgedirs[nedge2].v, startplane);
 703                                 if (VectorLength2(startplane) < COLLISION_EDGECROSS_MINLENGTH2)
 704                                         continue; // degenerate crossproduct
 705                                 CrossProduct(trace_end->edgedirs[nedge1].v, other_end->edgedirs[nedge2].v, endplane);
 706                                 if (VectorLength2(endplane) < COLLISION_EDGECROSS_MINLENGTH2)
 707                                         continue; // degenerate crossproduct
 708                         }
 709                         else
 710                         {
 711                                 CrossProduct(other_start->edgedirs[nedge2].v, trace_start->edgedirs[nedge1].v, startplane);
 712                                 if (VectorLength2(startplane) < COLLISION_EDGECROSS_MINLENGTH2)
 713                                         continue; // degenerate crossproduct
 714                                 CrossProduct(other_end->edgedirs[nedge2].v, trace_end->edgedirs[nedge1].v, endplane);
 715                                 if (VectorLength2(endplane) < COLLISION_EDGECROSS_MINLENGTH2)
 716                                         continue; // degenerate crossproduct
 717                         }
 718                         VectorNormalize(startplane);
 719                         VectorNormalize(endplane);
 720                 }
 721                 startplane[3] = furthestplanedist_float(startplane, other_start->points, othernumpoints);
 722                 endplane[3] = furthestplanedist_float(startplane, other_end->points, othernumpoints);
 723                 startdist = nearestplanedist_float(startplane, trace_start->points, tracenumpoints) - startplane[3] - collision_startnudge.value;
 724                 enddist = nearestplanedist_float(endplane, trace_end->points, tracenumpoints) - endplane[3] - collision_endnudge.value;
 725                 //Con_Printf("%c%i: startdist = %f, enddist = %f, startdist / (startdist - enddist) = %f\n", nplane2 != nplane ? 'b' : 'a', nplane2, startdist, enddist, startdist / (startdist - enddist));
 726
 727                 // aside from collisions, this is also used for error correction
 728                 if (startdist < collision_impactnudge.value && nplane < numplanes1 && (startdepth < startdist || startdepth == 1))
 729                 {
 730                         startdepth = startdist;
 731                         VectorCopy(startplane, startdepthnormal);
 732                 }
 733
 734                 if (startdist > enddist)
 735                 {
 736                         // moving into brush
 737                         if (enddist >= collision_enternudge.value)
 738                                 return;
 739                         if (startdist > 0)
 740                         {
 741                                 // enter
 742                                 imove = 1 / (startdist - enddist);
 743                                 f = (startdist - collision_enternudge.value) * imove;
 744                                 if (f < 0)
 745                                         f = 0;
 746                                 // check if this will reduce the collision time range
 747                                 if (enterfrac < f)
 748                                 {
 749                                         // reduced collision time range
 750                                         enterfrac = f;
 751                                         // if the collision time range is now empty, no collision
 752                                         if (enterfrac > leavefrac)
 753                                                 return;
 754                                         // if the collision would be further away than the trace's
 755                                         // existing collision data, we don't care about this
 756                                         // collision
 757                                         if (enterfrac > trace->realfraction)
 758                                                 return;
 759                                         // calculate the nudged fraction and impact normal we'll
 760                                         // need if we accept this collision later
 761                                         enterfrac2 = (startdist - collision_impactnudge.value) * imove;
 762                                         ie = 1.0f - enterfrac;
 763                                         newimpactplane[0] = startplane[0] * ie + endplane[0] * enterfrac;
 764                                         newimpactplane[1] = startplane[1] * ie + endplane[1] * enterfrac;
 765                                         newimpactplane[2] = startplane[2] * ie + endplane[2] * enterfrac;
 766                                         newimpactplane[3] = startplane[3] * ie + endplane[3] * enterfrac;
 767                                         if (nplane < numplanes1)
 768                                         {
 769                                                 // use the plane from other
 770                                                 nplane2 = nplane;
 771                                                 hitq3surfaceflags = other_start->planes[nplane2].q3surfaceflags;
 772                                                 hittexture = other_start->planes[nplane2].texture;
 773                                         }
 774                                         else if (nplane < numplanes2)
 775                                         {
 776                                                 // use the plane from trace
 777                                                 nplane2 = nplane - numplanes1;
 778                                                 hitq3surfaceflags = trace_start->planes[nplane2].q3surfaceflags;
 779                                                 hittexture = trace_start->planes[nplane2].texture;
 780                                         }
 781                                         else
 782                                         {
 783                                                 hitq3surfaceflags = other_start->q3surfaceflags;
 784                                                 hittexture = other_start->texture;
 785                                         }
 786                                 }
 787                         }
 788                 }
 789                 else
 790                 {
 791                         // moving out of brush
 792                         if (startdist > 0)
 793                                 return;
 794                         if (enddist > 0)
 795                         {
 796                                 // leave
 797                                 f = (startdist + collision_leavenudge.value) / (startdist - enddist);
 798                                 if (f > 1)
 799                                         f = 1;
 800                                 // check if this will reduce the collision time range
 801                                 if (leavefrac > f)
 802                                 {
 803                                         // reduced collision time range
 804                                         leavefrac = f;
 805                                         // if the collision time range is now empty, no collision
 806                                         if (enterfrac > leavefrac)
 807                                                 return;
 808                                 }
 809                         }
 810                 }
 811         }
 812
 813         // at this point we know the trace overlaps the brush because it was not
 814         // rejected at any point in the loop above
 815
 816         // see if the trace started outside the brush or not
 817         if (enterfrac > -1)
 818         {
 819                 // started outside, and overlaps, therefore there is a collision here
 820                 // store out the impact information
 821                 if (trace->hitsupercontentsmask & other_start->supercontents)
 822                 {
 823                         trace->hitsupercontents = other_start->supercontents;
 824                         trace->hitq3surfaceflags = hitq3surfaceflags;
 825                         trace->hittexture = hittexture;
 826                         trace->realfraction = bound(0, enterfrac, 1);
 827                         trace->fraction = bound(0, enterfrac2, 1);
 828                         if (collision_prefernudgedfraction.integer)
 829                                 trace->realfraction = trace->fraction;
 830                         VectorCopy(newimpactplane, trace->plane.normal);
 831                         trace->plane.dist = newimpactplane[3];
 832                 }
 833         }
 834         else
 835         {
 836                 // started inside, update startsolid and friends
 837                 trace->startsupercontents |= other_start->supercontents;
 838                 if (trace->hitsupercontentsmask & other_start->supercontents)
 839                 {
 840                         trace->startsolid = true;
 841                         if (leavefrac < 1)
 842                                 trace->allsolid = true;
 843                         VectorCopy(newimpactplane, trace->plane.normal);
 844                         trace->plane.dist = newimpactplane[3];
 845                         if (trace->startdepth > startdepth)
 846                         {
 847                                 trace->startdepth = startdepth;
 848                                 VectorCopy(startdepthnormal, trace->startdepthnormal);
 849                         }
 850                 }
 851         }
 852 }
 853
 854 // NOTE: start and end of each brush pair must have same numplanes/numpoints
 855 void Collision_TraceLineBrushFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const colbrushf_t *other_start, const colbrushf_t *other_end)
 856 {
 857         int nplane, hitq3surfaceflags = 0;
 858         int numplanes = other_start->numplanes;
 859         vec_t enterfrac = -1, leavefrac = 1, startdist, enddist, ie, f, imove, enterfrac2 = -1;
 860         vec4_t startplane;
 861         vec4_t endplane;
 862         vec4_t newimpactplane;
 863         const texture_t *hittexture = NULL;
 864         vec_t startdepth = 1;
 865         vec3_t startdepthnormal;
 866
 867         if (collision_debug_tracelineasbox.integer)
 868         {
 869                 colboxbrushf_t thisbrush_start, thisbrush_end;
 870                 Collision_BrushForBox(&thisbrush_start, linestart, linestart, 0, 0, NULL);
 871                 Collision_BrushForBox(&thisbrush_end, lineend, lineend, 0, 0, NULL);
 872                 Collision_TraceBrushBrushFloat(trace, &thisbrush_start.brush, &thisbrush_end.brush, other_start, other_end);
 873                 return;
 874         }
 875
 876         VectorClear(startdepthnormal);
 877         Vector4Clear(newimpactplane);
 878
 879         // Separating Axis Theorem:
 880         // if a supporting vector (plane normal) can be found that separates two
 881         // objects, they are not colliding.
 882         //
 883         // Minkowski Sum:
 884         // reduce the size of one object to a point while enlarging the other to
 885         // represent the space that point can not occupy.
 886         //
 887         // try every plane we can construct between the two brushes and measure
 888         // the distance between them.
 889         for (nplane = 0;nplane < numplanes;nplane++)
 890         {
 891                 VectorCopy(other_start->planes[nplane].normal, startplane);
 892                 startplane[3] = other_start->planes[nplane].dist;
 893                 VectorCopy(other_end->planes[nplane].normal, endplane);
 894                 endplane[3] = other_end->planes[nplane].dist;
 895                 startdist = DotProduct(linestart, startplane) - startplane[3] - collision_startnudge.value;
 896                 enddist = DotProduct(lineend, endplane) - endplane[3] - collision_endnudge.value;
 897                 //Con_Printf("%c%i: startdist = %f, enddist = %f, startdist / (startdist - enddist) = %f\n", nplane2 != nplane ? 'b' : 'a', nplane2, startdist, enddist, startdist / (startdist - enddist));
 898
 899                 // aside from collisions, this is also used for error correction
 900                 if (startdist < collision_impactnudge.value && (startdepth < startdist || startdepth == 1))
 901                 {
 902                         startdepth = startdist;
 903                         VectorCopy(startplane, startdepthnormal);
 904                 }
 905
 906                 if (startdist > enddist)
 907                 {
 908                         // moving into brush
 909                         if (enddist >= collision_enternudge.value)
 910                                 return;
 911                         if (startdist > 0)
 912                         {
 913                                 // enter
 914                                 imove = 1 / (startdist - enddist);
 915                                 f = (startdist - collision_enternudge.value) * imove;
 916                                 if (f < 0)
 917                                         f = 0;
 918                                 // check if this will reduce the collision time range
 919                                 if (enterfrac < f)
 920                                 {
 921                                         // reduced collision time range
 922                                         enterfrac = f;
 923                                         // if the collision time range is now empty, no collision
 924                                         if (enterfrac > leavefrac)
 925                                                 return;
 926                                         // if the collision would be further away than the trace's
 927                                         // existing collision data, we don't care about this
 928                                         // collision
 929                                         if (enterfrac > trace->realfraction)
 930                                                 return;
 931                                         // calculate the nudged fraction and impact normal we'll
 932                                         // need if we accept this collision later
 933                                         enterfrac2 = (startdist - collision_impactnudge.value) * imove;
 934                                         ie = 1.0f - enterfrac;
 935                                         newimpactplane[0] = startplane[0] * ie + endplane[0] * enterfrac;
 936                                         newimpactplane[1] = startplane[1] * ie + endplane[1] * enterfrac;
 937                                         newimpactplane[2] = startplane[2] * ie + endplane[2] * enterfrac;
 938                                         newimpactplane[3] = startplane[3] * ie + endplane[3] * enterfrac;
 939                                         hitq3surfaceflags = other_start->planes[nplane].q3surfaceflags;
 940                                         hittexture = other_start->planes[nplane].texture;
 941                                 }
 942                         }
 943                 }
 944                 else
 945                 {
 946                         // moving out of brush
 947                         if (startdist > 0)
 948                                 return;
 949                         if (enddist > 0)
 950                         {
 951                                 // leave
 952                                 f = (startdist + collision_leavenudge.value) / (startdist - enddist);
 953                                 if (f > 1)
 954                                         f = 1;
 955                                 // check if this will reduce the collision time range
 956                                 if (leavefrac > f)
 957                                 {
 958                                         // reduced collision time range
 959                                         leavefrac = f;
 960                                         // if the collision time range is now empty, no collision
 961                                         if (enterfrac > leavefrac)
 962                                                 return;
 963                                 }
 964                         }
 965                 }
 966         }
 967
 968         // at this point we know the trace overlaps the brush because it was not
 969         // rejected at any point in the loop above
 970
 971         // see if the trace started outside the brush or not
 972         if (enterfrac > -1)
 973         {
 974                 // started outside, and overlaps, therefore there is a collision here
 975                 // store out the impact information
 976                 if (trace->hitsupercontentsmask & other_start->supercontents)
 977                 {
 978                         trace->hitsupercontents = other_start->supercontents;
 979                         trace->hitq3surfaceflags = hitq3surfaceflags;
 980                         trace->hittexture = hittexture;
 981                         trace->realfraction = bound(0, enterfrac, 1);
 982                         trace->fraction = bound(0, enterfrac2, 1);
 983                         if (collision_prefernudgedfraction.integer)
 984                                 trace->realfraction = trace->fraction;
 985                         VectorCopy(newimpactplane, trace->plane.normal);
 986                         trace->plane.dist = newimpactplane[3];
 987                 }
 988         }
 989         else
 990         {
 991                 // started inside, update startsolid and friends
 992                 trace->startsupercontents |= other_start->supercontents;
 993                 if (trace->hitsupercontentsmask & other_start->supercontents)
 994                 {
 995                         trace->startsolid = true;
 996                         if (leavefrac < 1)
 997                                 trace->allsolid = true;
 998                         VectorCopy(newimpactplane, trace->plane.normal);
 999                         trace->plane.dist = newimpactplane[3];
1000                         if (trace->startdepth > startdepth)
1001                         {
1002                                 trace->startdepth = startdepth;
1003                                 VectorCopy(startdepthnormal, trace->startdepthnormal);
1004                         }
1005                 }
1006         }
1007 }
1008
1009 qboolean Collision_PointInsideBrushFloat(const vec3_t point, const colbrushf_t *brush)
1010 {
1011         int nplane;
1012         const colplanef_t *plane;
1013
1014         if (!BoxesOverlap(point, point, brush->mins, brush->maxs))
1015                 return false;
1016         for (nplane = 0, plane = brush->planes;nplane < brush->numplanes;nplane++, plane++)
1017                 if (DotProduct(plane->normal, point) > plane->dist)
1018                         return false;
1019         return true;
1020 }
1021
1022 void Collision_TracePointBrushFloat(trace_t *trace, const vec3_t point, const colbrushf_t *thatbrush)
1023 {
1024         if (!Collision_PointInsideBrushFloat(point, thatbrush))
1025                 return;
1026
1027         trace->startsupercontents |= thatbrush->supercontents;
1028         if (trace->hitsupercontentsmask & thatbrush->supercontents)
1029         {
1030                 trace->startsolid = true;
1031                 trace->allsolid = true;
1032         }
1033 }
1034
1035 static void Collision_SnapCopyPoints(int numpoints, const colpointf_t *in, colpointf_t *out, float fractionprecision, float invfractionprecision)
1036 {
1037         int i;
1038         for (i = 0;i < numpoints;i++)
1039         {
1040                 out[i].v[0] = floor(in[i].v[0] * fractionprecision + 0.5f) * invfractionprecision;
1041                 out[i].v[1] = floor(in[i].v[1] * fractionprecision + 0.5f) * invfractionprecision;
1042                 out[i].v[2] = floor(in[i].v[2] * fractionprecision + 0.5f) * invfractionprecision;
1043         }
1044 }
1045
1046 void Collision_TraceBrushTriangleMeshFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numtriangles, const int *element3i, const float *vertex3f, int stride, float *bbox6f, int supercontents, int q3surfaceflags, const texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
1047 {
1048         int i;
1049         colpointf_t points[3];
1050         colpointf_t edgedirs[3];
1051         colplanef_t planes[5];
1052         colbrushf_t brush;
1053         memset(&brush, 0, sizeof(brush));
1054         brush.isaabb = false;
1055         brush.hasaabbplanes = false;
1056         brush.numpoints = 3;
1057         brush.numedgedirs = 3;
1058         brush.numplanes = 5;
1059         brush.points = points;
1060         brush.edgedirs = edgedirs;
1061         brush.planes = planes;
1062         brush.supercontents = supercontents;
1063         brush.q3surfaceflags = q3surfaceflags;
1064         brush.texture = texture;
1065         for (i = 0;i < brush.numplanes;i++)
1066         {
1067                 brush.planes[i].q3surfaceflags = q3surfaceflags;
1068                 brush.planes[i].texture = texture;
1069         }
1070         if(stride > 0)
1071         {
1072                 int k, cnt, tri;
1073                 cnt = (numtriangles + stride - 1) / stride;
1074                 for(i = 0; i < cnt; ++i)
1075                 {
1076                         if(BoxesOverlap(bbox6f + i * 6, bbox6f + i * 6 + 3, segmentmins, segmentmaxs))
1077                         {
1078                                 for(k = 0; k < stride; ++k)
1079                                 {
1080                                         tri = i * stride + k;
1081                                         if(tri >= numtriangles)
1082                                                 break;
1083                                         VectorCopy(vertex3f + element3i[tri * 3 + 0] * 3, points[0].v);
1084                                         VectorCopy(vertex3f + element3i[tri * 3 + 1] * 3, points[1].v);
1085                                         VectorCopy(vertex3f + element3i[tri * 3 + 2] * 3, points[2].v);
1086                                         Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
1087                                         Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
1088                                         Collision_CalcPlanesForPolygonBrushFloat(&brush);
1089                                         //Collision_PrintBrushAsQHull(&brush, "brush");
1090                                         Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
1091                                 }
1092                         }
1093                 }
1094         }
1095         else if(stride == 0)
1096         {
1097                 for (i = 0;i < numtriangles;i++, element3i += 3)
1098                 {
1099                         if (TriangleOverlapsBox(vertex3f + element3i[0]*3, vertex3f + element3i[1]*3, vertex3f + element3i[2]*3, segmentmins, segmentmaxs))
1100                         {
1101                                 VectorCopy(vertex3f + element3i[0] * 3, points[0].v);
1102                                 VectorCopy(vertex3f + element3i[1] * 3, points[1].v);
1103                                 VectorCopy(vertex3f + element3i[2] * 3, points[2].v);
1104                                 Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
1105                                 Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
1106                                 Collision_CalcPlanesForPolygonBrushFloat(&brush);
1107                                 //Collision_PrintBrushAsQHull(&brush, "brush");
1108                                 Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
1109                         }
1110                 }
1111         }
1112         else
1113         {
1114                 for (i = 0;i < numtriangles;i++, element3i += 3)
1115                 {
1116                         VectorCopy(vertex3f + element3i[0] * 3, points[0].v);
1117                         VectorCopy(vertex3f + element3i[1] * 3, points[1].v);
1118                         VectorCopy(vertex3f + element3i[2] * 3, points[2].v);
1119                         Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
1120                         Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
1121                         Collision_CalcPlanesForPolygonBrushFloat(&brush);
1122                         //Collision_PrintBrushAsQHull(&brush, "brush");
1123                         Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
1124                 }
1125         }
1126 }
1127
1128 void Collision_TraceLineTriangleMeshFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, int numtriangles, const int *element3i, const float *vertex3f, int stride, float *bbox6f, int supercontents, int q3surfaceflags, const texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
1129 {
1130         int i;
1131         // FIXME: snap vertices?
1132         if(stride > 0)
1133         {
1134                 int k, cnt, tri;
1135                 cnt = (numtriangles + stride - 1) / stride;
1136                 for(i = 0; i < cnt; ++i)
1137                 {
1138                         if(BoxesOverlap(bbox6f + i * 6, bbox6f + i * 6 + 3, segmentmins, segmentmaxs))
1139                         {
1140                                 for(k = 0; k < stride; ++k)
1141                                 {
1142                                         tri = i * stride + k;
1143                                         if(tri >= numtriangles)
1144                                                 break;
1145                                         Collision_TraceLineTriangleFloat(trace, linestart, lineend, vertex3f + element3i[tri * 3 + 0] * 3, vertex3f + element3i[tri * 3 + 1] * 3, vertex3f + element3i[tri * 3 + 2] * 3, supercontents, q3surfaceflags, texture);
1146                                 }
1147                         }
1148                 }
1149         }
1150         else
1151         {
1152                 for (i = 0;i < numtriangles;i++, element3i += 3)
1153                         Collision_TraceLineTriangleFloat(trace, linestart, lineend, vertex3f + element3i[0] * 3, vertex3f + element3i[1] * 3, vertex3f + element3i[2] * 3, supercontents, q3surfaceflags, texture);
1154         }
1155 }
1156
1157 void Collision_TraceBrushTriangleFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, const float *v0, const float *v1, const float *v2, int supercontents, int q3surfaceflags, const texture_t *texture)
1158 {
1159         int i;
1160         colpointf_t points[3];
1161         colpointf_t edgedirs[3];
1162         colplanef_t planes[5];
1163         colbrushf_t brush;
1164         memset(&brush, 0, sizeof(brush));
1165         brush.isaabb = false;
1166         brush.hasaabbplanes = false;
1167         brush.numpoints = 3;
1168         brush.numedgedirs = 3;
1169         brush.numplanes = 5;
1170         brush.points = points;
1171         brush.edgedirs = edgedirs;
1172         brush.planes = planes;
1173         brush.supercontents = supercontents;
1174         brush.q3surfaceflags = q3surfaceflags;
1175         brush.texture = texture;
1176         for (i = 0;i < brush.numplanes;i++)
1177         {
1178                 brush.planes[i].q3surfaceflags = q3surfaceflags;
1179                 brush.planes[i].texture = texture;
1180         }
1181         VectorCopy(v0, points[0].v);
1182         VectorCopy(v1, points[1].v);
1183         VectorCopy(v2, points[2].v);
1184         Collision_SnapCopyPoints(brush.numpoints, points, points, COLLISION_SNAPSCALE, COLLISION_SNAP);
1185         Collision_CalcEdgeDirsForPolygonBrushFloat(&brush);
1186         Collision_CalcPlanesForPolygonBrushFloat(&brush);
1187         //Collision_PrintBrushAsQHull(&brush, "brush");
1188         Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &brush, &brush);
1189 }
1190
1191 void Collision_BrushForBox(colboxbrushf_t *boxbrush, const vec3_t mins, const vec3_t maxs, int supercontents, int q3surfaceflags, const texture_t *texture)
1192 {
1193         int i;
1194         memset(boxbrush, 0, sizeof(*boxbrush));
1195         boxbrush->brush.isaabb = true;
1196         boxbrush->brush.hasaabbplanes = true;
1197         boxbrush->brush.points = boxbrush->points;
1198         boxbrush->brush.edgedirs = boxbrush->edgedirs;
1199         boxbrush->brush.planes = boxbrush->planes;
1200         boxbrush->brush.supercontents = supercontents;
1201         boxbrush->brush.q3surfaceflags = q3surfaceflags;
1202         boxbrush->brush.texture = texture;
1203         if (VectorCompare(mins, maxs))
1204         {
1205                 // point brush
1206                 boxbrush->brush.numpoints = 1;
1207                 boxbrush->brush.numedgedirs = 0;
1208                 boxbrush->brush.numplanes = 0;
1209                 VectorCopy(mins, boxbrush->brush.points[0].v);
1210         }
1211         else
1212         {
1213                 boxbrush->brush.numpoints = 8;
1214                 boxbrush->brush.numedgedirs = 3;
1215                 boxbrush->brush.numplanes = 6;
1216                 // there are 8 points on a box
1217                 // there are 3 edgedirs on a box (both signs are tested in collision)
1218                 // there are 6 planes on a box
1219                 VectorSet(boxbrush->brush.points[0].v, mins[0], mins[1], mins[2]);
1220                 VectorSet(boxbrush->brush.points[1].v, maxs[0], mins[1], mins[2]);
1221                 VectorSet(boxbrush->brush.points[2].v, mins[0], maxs[1], mins[2]);
1222                 VectorSet(boxbrush->brush.points[3].v, maxs[0], maxs[1], mins[2]);
1223                 VectorSet(boxbrush->brush.points[4].v, mins[0], mins[1], maxs[2]);
1224                 VectorSet(boxbrush->brush.points[5].v, maxs[0], mins[1], maxs[2]);
1225                 VectorSet(boxbrush->brush.points[6].v, mins[0], maxs[1], maxs[2]);
1226                 VectorSet(boxbrush->brush.points[7].v, maxs[0], maxs[1], maxs[2]);
1227                 VectorSet(boxbrush->brush.edgedirs[0].v, 1, 0, 0);
1228                 VectorSet(boxbrush->brush.edgedirs[1].v, 0, 1, 0);
1229                 VectorSet(boxbrush->brush.edgedirs[2].v, 0, 0, 1);
1230                 VectorSet(boxbrush->brush.planes[0].normal, -1,  0,  0);boxbrush->brush.planes[0].dist = -mins[0];
1231                 VectorSet(boxbrush->brush.planes[1].normal,  1,  0,  0);boxbrush->brush.planes[1].dist =  maxs[0];
1232                 VectorSet(boxbrush->brush.planes[2].normal,  0, -1,  0);boxbrush->brush.planes[2].dist = -mins[1];
1233                 VectorSet(boxbrush->brush.planes[3].normal,  0,  1,  0);boxbrush->brush.planes[3].dist =  maxs[1];
1234                 VectorSet(boxbrush->brush.planes[4].normal,  0,  0, -1);boxbrush->brush.planes[4].dist = -mins[2];
1235                 VectorSet(boxbrush->brush.planes[5].normal,  0,  0,  1);boxbrush->brush.planes[5].dist =  maxs[2];
1236                 for (i = 0;i < 6;i++)
1237                 {
1238                         boxbrush->brush.planes[i].q3surfaceflags = q3surfaceflags;
1239                         boxbrush->brush.planes[i].texture = texture;
1240                 }
1241         }
1242         boxbrush->brush.supercontents = supercontents;
1243         boxbrush->brush.q3surfaceflags = q3surfaceflags;
1244         boxbrush->brush.texture = texture;
1245         VectorSet(boxbrush->brush.mins, mins[0] - 1, mins[1] - 1, mins[2] - 1);
1246         VectorSet(boxbrush->brush.maxs, maxs[0] + 1, maxs[1] + 1, maxs[2] + 1);
1247         //Collision_ValidateBrush(&boxbrush->brush);
1248 }
1249
1250 //pseudocode for detecting line/sphere overlap without calculating an impact point
1251 //linesphereorigin = sphereorigin - linestart;linediff = lineend - linestart;linespherefrac = DotProduct(linesphereorigin, linediff) / DotProduct(linediff, linediff);return VectorLength2(linesphereorigin - bound(0, linespherefrac, 1) * linediff) >= sphereradius*sphereradius;
1252
1253 // LordHavoc: currently unused, but tested
1254 // note: this can be used for tracing a moving sphere vs a stationary sphere,
1255 // by simply adding the moving sphere's radius to the sphereradius parameter,
1256 // all the results are correct (impactpoint, impactnormal, and fraction)
1257 float Collision_ClipTrace_Line_Sphere(double *linestart, double *lineend, double *sphereorigin, double sphereradius, double *impactpoint, double *impactnormal)
1258 {
1259         double dir[3], scale, v[3], deviationdist2, impactdist, linelength;
1260         // make sure the impactpoint and impactnormal are valid even if there is
1261         // no collision
1262         VectorCopy(lineend, impactpoint);
1263         VectorClear(impactnormal);
1264         // calculate line direction
1265         VectorSubtract(lineend, linestart, dir);
1266         // normalize direction
1267         linelength = VectorLength(dir);
1268         if (linelength)
1269         {
1270                 scale = 1.0 / linelength;
1271                 VectorScale(dir, scale, dir);
1272         }
1273         // this dotproduct calculates the distance along the line at which the
1274         // sphere origin is (nearest point to the sphere origin on the line)
1275         impactdist = DotProduct(sphereorigin, dir) - DotProduct(linestart, dir);
1276         // calculate point on line at that distance, and subtract the
1277         // sphereorigin from it, so we have a vector to measure for the distance
1278         // of the line from the sphereorigin (deviation, how off-center it is)
1279         VectorMA(linestart, impactdist, dir, v);
1280         VectorSubtract(v, sphereorigin, v);
1281         deviationdist2 = sphereradius * sphereradius - VectorLength2(v);
1282         // if squared offset length is outside the squared sphere radius, miss
1283         if (deviationdist2 < 0)
1284                 return 1; // miss (off to the side)
1285         // nudge back to find the correct impact distance
1286         impactdist -= sqrt(deviationdist2);
1287         if (impactdist >= linelength)
1288                 return 1; // miss (not close enough)
1289         if (impactdist < 0)
1290                 return 1; // miss (linestart is past or inside sphere)
1291         // calculate new impactpoint
1292         VectorMA(linestart, impactdist, dir, impactpoint);
1293         // calculate impactnormal (surface normal at point of impact)
1294         VectorSubtract(impactpoint, sphereorigin, impactnormal);
1295         // normalize impactnormal
1296         VectorNormalize(impactnormal);
1297         // return fraction of movement distance
1298         return impactdist / linelength;
1299 }
1300
1301 void Collision_TraceLineTriangleFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const float *point0, const float *point1, const float *point2, int supercontents, int q3surfaceflags, const texture_t *texture)
1302 {
1303 #if 1
1304         // more optimized
1305         float d1, d2, d, f, impact[3], edgenormal[3], faceplanenormal[3], faceplanedist, faceplanenormallength2, edge01[3], edge21[3], edge02[3];
1306
1307         // this function executes:
1308         // 32 ops when line starts behind triangle
1309         // 38 ops when line ends infront of triangle
1310         // 43 ops when line fraction is already closer than this triangle
1311         // 72 ops when line is outside edge 01
1312         // 92 ops when line is outside edge 21
1313         // 115 ops when line is outside edge 02
1314         // 123 ops when line impacts triangle and updates trace results
1315
1316         // this code is designed for clockwise triangles, conversion to
1317         // counterclockwise would require swapping some things around...
1318         // it is easier to simply swap the point0 and point2 parameters to this
1319         // function when calling it than it is to rewire the internals.
1320
1321         // calculate the faceplanenormal of the triangle, this represents the front side
1322         // 15 ops
1323         VectorSubtract(point0, point1, edge01);
1324         VectorSubtract(point2, point1, edge21);
1325         CrossProduct(edge01, edge21, faceplanenormal);
1326         // there's no point in processing a degenerate triangle (GIGO - Garbage In, Garbage Out)
1327         // 6 ops
1328         faceplanenormallength2 = DotProduct(faceplanenormal, faceplanenormal);
1329         if (faceplanenormallength2 < 0.0001f)
1330                 return;
1331         // calculate the distance
1332         // 5 ops
1333         faceplanedist = DotProduct(point0, faceplanenormal);
1334
1335         // if start point is on the back side there is no collision
1336         // (we don't care about traces going through the triangle the wrong way)
1337
1338         // calculate the start distance
1339         // 6 ops
1340         d1 = DotProduct(faceplanenormal, linestart);
1341         if (d1 <= faceplanedist)
1342                 return;
1343
1344         // calculate the end distance
1345         // 6 ops
1346         d2 = DotProduct(faceplanenormal, lineend);
1347         // if both are in front, there is no collision
1348         if (d2 >= faceplanedist)
1349                 return;
1350
1351         // from here on we know d1 is >= 0 and d2 is < 0
1352         // this means the line starts infront and ends behind, passing through it
1353
1354         // calculate the recipricol of the distance delta,
1355         // so we can use it multiple times cheaply (instead of division)
1356         // 2 ops
1357         d = 1.0f / (d1 - d2);
1358         // calculate the impact fraction by taking the start distance (> 0)
1359         // and subtracting the face plane distance (this is the distance of the
1360         // triangle along that same normal)
1361         // then multiply by the recipricol distance delta
1362         // 2 ops
1363         f = (d1 - faceplanedist) * d;
1364         // skip out if this impact is further away than previous ones
1365         // 1 ops
1366         if (f > trace->realfraction)
1367                 return;
1368         // calculate the perfect impact point for classification of insidedness
1369         // 9 ops
1370         impact[0] = linestart[0] + f * (lineend[0] - linestart[0]);
1371         impact[1] = linestart[1] + f * (lineend[1] - linestart[1]);
1372         impact[2] = linestart[2] + f * (lineend[2] - linestart[2]);
1373
1374         // calculate the edge normal and reject if impact is outside triangle
1375         // (an edge normal faces away from the triangle, to get the desired normal
1376         //  a crossproduct with the faceplanenormal is used, and because of the way
1377         // the insidedness comparison is written it does not need to be normalized)
1378
1379         // first use the two edges from the triangle plane math
1380         // the other edge only gets calculated if the point survives that long
1381
1382         // 20 ops
1383         CrossProduct(edge01, faceplanenormal, edgenormal);
1384         if (DotProduct(impact, edgenormal) > DotProduct(point1, edgenormal))
1385                 return;
1386
1387         // 20 ops
1388         CrossProduct(faceplanenormal, edge21, edgenormal);
1389         if (DotProduct(impact, edgenormal) > DotProduct(point2, edgenormal))
1390                 return;
1391
1392         // 23 ops
1393         VectorSubtract(point0, point2, edge02);
1394         CrossProduct(faceplanenormal, edge02, edgenormal);
1395         if (DotProduct(impact, edgenormal) > DotProduct(point0, edgenormal))
1396                 return;
1397
1398         // 8 ops (rare)
1399
1400         // store the new trace fraction
1401         trace->realfraction = f;
1402
1403         // calculate a nudged fraction to keep it out of the surface
1404         // (the main fraction remains perfect)
1405         trace->fraction = f - collision_impactnudge.value * d;
1406
1407         if (collision_prefernudgedfraction.integer)
1408                 trace->realfraction = trace->fraction;
1409
1410         // store the new trace plane (because collisions only happen from
1411         // the front this is always simply the triangle normal, never flipped)
1412         d = 1.0 / sqrt(faceplanenormallength2);
1413         VectorScale(faceplanenormal, d, trace->plane.normal);
1414         trace->plane.dist = faceplanedist * d;
1415
1416         trace->hitsupercontents = supercontents;
1417         trace->hitq3surfaceflags = q3surfaceflags;
1418         trace->hittexture = texture;
1419 #else
1420         float d1, d2, d, f, fnudged, impact[3], edgenormal[3], faceplanenormal[3], faceplanedist, edge[3];
1421
1422         // this code is designed for clockwise triangles, conversion to
1423         // counterclockwise would require swapping some things around...
1424         // it is easier to simply swap the point0 and point2 parameters to this
1425         // function when calling it than it is to rewire the internals.
1426
1427         // calculate the unnormalized faceplanenormal of the triangle,
1428         // this represents the front side
1429         TriangleNormal(point0, point1, point2, faceplanenormal);
1430         // there's no point in processing a degenerate triangle
1431         // (GIGO - Garbage In, Garbage Out)
1432         if (DotProduct(faceplanenormal, faceplanenormal) < 0.0001f)
1433                 return;
1434         // calculate the unnormalized distance
1435         faceplanedist = DotProduct(point0, faceplanenormal);
1436
1437         // calculate the unnormalized start distance
1438         d1 = DotProduct(faceplanenormal, linestart) - faceplanedist;
1439         // if start point is on the back side there is no collision
1440         // (we don't care about traces going through the triangle the wrong way)
1441         if (d1 <= 0)
1442                 return;
1443
1444         // calculate the unnormalized end distance
1445         d2 = DotProduct(faceplanenormal, lineend) - faceplanedist;
1446         // if both are in front, there is no collision
1447         if (d2 >= 0)
1448                 return;
1449
1450         // from here on we know d1 is >= 0 and d2 is < 0
1451         // this means the line starts infront and ends behind, passing through it
1452
1453         // calculate the recipricol of the distance delta,
1454         // so we can use it multiple times cheaply (instead of division)
1455         d = 1.0f / (d1 - d2);
1456         // calculate the impact fraction by taking the start distance (> 0)
1457         // and subtracting the face plane distance (this is the distance of the
1458         // triangle along that same normal)
1459         // then multiply by the recipricol distance delta
1460         f = d1 * d;
1461         // skip out if this impact is further away than previous ones
1462         if (f > trace->realfraction)
1463                 return;
1464         // calculate the perfect impact point for classification of insidedness
1465         impact[0] = linestart[0] + f * (lineend[0] - linestart[0]);
1466         impact[1] = linestart[1] + f * (lineend[1] - linestart[1]);
1467         impact[2] = linestart[2] + f * (lineend[2] - linestart[2]);
1468
1469         // calculate the edge normal and reject if impact is outside triangle
1470         // (an edge normal faces away from the triangle, to get the desired normal
1471         //  a crossproduct with the faceplanenormal is used, and because of the way
1472         // the insidedness comparison is written it does not need to be normalized)
1473
1474         VectorSubtract(point2, point0, edge);
1475         CrossProduct(edge, faceplanenormal, edgenormal);
1476         if (DotProduct(impact, edgenormal) > DotProduct(point0, edgenormal))
1477                 return;
1478
1479         VectorSubtract(point0, point1, edge);
1480         CrossProduct(edge, faceplanenormal, edgenormal);
1481         if (DotProduct(impact, edgenormal) > DotProduct(point1, edgenormal))
1482                 return;
1483
1484         VectorSubtract(point1, point2, edge);
1485         CrossProduct(edge, faceplanenormal, edgenormal);
1486         if (DotProduct(impact, edgenormal) > DotProduct(point2, edgenormal))
1487                 return;
1488
1489         // store the new trace fraction
1490         trace->realfraction = bound(0, f, 1);
1491
1492         // store the new trace plane (because collisions only happen from
1493         // the front this is always simply the triangle normal, never flipped)
1494         VectorNormalize(faceplanenormal);
1495         VectorCopy(faceplanenormal, trace->plane.normal);
1496         trace->plane.dist = DotProduct(point0, faceplanenormal);
1497
1498         // calculate the normalized start and end distances
1499         d1 = DotProduct(trace->plane.normal, linestart) - trace->plane.dist;
1500         d2 = DotProduct(trace->plane.normal, lineend) - trace->plane.dist;
1501
1502         // calculate a nudged fraction to keep it out of the surface
1503         // (the main fraction remains perfect)
1504         fnudged = (d1 - collision_impactnudge.value) / (d1 - d2);
1505         trace->fraction = bound(0, fnudged, 1);
1506
1507         // store the new trace endpos
1508         // not needed, it's calculated later when the trace is finished
1509         //trace->endpos[0] = linestart[0] + fnudged * (lineend[0] - linestart[0]);
1510         //trace->endpos[1] = linestart[1] + fnudged * (lineend[1] - linestart[1]);
1511         //trace->endpos[2] = linestart[2] + fnudged * (lineend[2] - linestart[2]);
1512         trace->hitsupercontents = supercontents;
1513         trace->hitq3surfaceflags = q3surfaceflags;
1514         trace->hittexture = texture;
1515 #endif
1516 }
1517
1518 void Collision_BoundingBoxOfBrushTraceSegment(const colbrushf_t *start, const colbrushf_t *end, vec3_t mins, vec3_t maxs, float startfrac, float endfrac)
1519 {
1520         int i;
1521         colpointf_t *ps, *pe;
1522         float tempstart[3], tempend[3];
1523         VectorLerp(start->points[0].v, startfrac, end->points[0].v, mins);
1524         VectorCopy(mins, maxs);
1525         for (i = 0, ps = start->points, pe = end->points;i < start->numpoints;i++, ps++, pe++)
1526         {
1527                 VectorLerp(ps->v, startfrac, pe->v, tempstart);
1528                 VectorLerp(ps->v, endfrac, pe->v, tempend);
1529                 mins[0] = min(mins[0], min(tempstart[0], tempend[0]));
1530                 mins[1] = min(mins[1], min(tempstart[1], tempend[1]));
1531                 mins[2] = min(mins[2], min(tempstart[2], tempend[2]));
1532                 maxs[0] = min(maxs[0], min(tempstart[0], tempend[0]));
1533                 maxs[1] = min(maxs[1], min(tempstart[1], tempend[1]));
1534                 maxs[2] = min(maxs[2], min(tempstart[2], tempend[2]));
1535         }
1536         mins[0] -= 1;
1537         mins[1] -= 1;
1538         mins[2] -= 1;
1539         maxs[0] += 1;
1540         maxs[1] += 1;
1541         maxs[2] += 1;
1542 }
1543
1544 //===========================================
1545
1546 static void Collision_TranslateBrush(const vec3_t shift, colbrushf_t *brush)
1547 {
1548         int i;
1549         // now we can transform the data
1550         for(i = 0; i < brush->numplanes; ++i)
1551         {
1552                 brush->planes[i].dist += DotProduct(shift, brush->planes[i].normal);
1553         }
1554         for(i = 0; i < brush->numpoints; ++i)
1555         {
1556                 VectorAdd(brush->points[i].v, shift, brush->points[i].v);
1557         }
1558         VectorAdd(brush->mins, shift, brush->mins);
1559         VectorAdd(brush->maxs, shift, brush->maxs);
1560 }
1561
1562 static void Collision_TransformBrush(const matrix4x4_t *matrix, colbrushf_t *brush)
1563 {
1564         int i;
1565         vec3_t v;
1566         // we're breaking any AABB properties here...
1567         brush->isaabb = false;
1568         brush->hasaabbplanes = false;
1569         // now we can transform the data
1570         for(i = 0; i < brush->numplanes; ++i)
1571         {
1572                 Matrix4x4_TransformPositivePlane(matrix, brush->planes[i].normal[0], brush->planes[i].normal[1], brush->planes[i].normal[2], brush->planes[i].dist, brush->planes[i].normal);
1573         }
1574         for(i = 0; i < brush->numedgedirs; ++i)
1575         {
1576                 Matrix4x4_Transform(matrix, brush->edgedirs[i].v, v);
1577                 VectorCopy(v, brush->edgedirs[i].v);
1578         }
1579         for(i = 0; i < brush->numpoints; ++i)
1580         {
1581                 Matrix4x4_Transform(matrix, brush->points[i].v, v);
1582                 VectorCopy(v, brush->points[i].v);
1583         }
1584         VectorCopy(brush->points[0].v, brush->mins);
1585         VectorCopy(brush->points[0].v, brush->maxs);
1586         for(i = 1; i < brush->numpoints; ++i)
1587         {
1588                 if(brush->points[i].v[0] < brush->mins[0]) brush->mins[0] = brush->points[i].v[0];
1589                 if(brush->points[i].v[1] < brush->mins[1]) brush->mins[1] = brush->points[i].v[1];
1590                 if(brush->points[i].v[2] < brush->mins[2]) brush->mins[2] = brush->points[i].v[2];
1591                 if(brush->points[i].v[0] > brush->maxs[0]) brush->maxs[0] = brush->points[i].v[0];
1592                 if(brush->points[i].v[1] > brush->maxs[1]) brush->maxs[1] = brush->points[i].v[1];
1593                 if(brush->points[i].v[2] > brush->maxs[2]) brush->maxs[2] = brush->points[i].v[2];
1594         }
1595 }
1596
1597 typedef struct collision_cachedtrace_parameters_s
1598 {
1599         dp_model_t *model;
1600         vec3_t end;
1601         vec3_t start;
1602         int hitsupercontentsmask;
1603         matrix4x4_t matrix;
1604 }
1605 collision_cachedtrace_parameters_t;
1606
1607 typedef struct collision_cachedtrace_s
1608 {
1609         qboolean valid;
1610         collision_cachedtrace_parameters_t p;
1611         trace_t result;
1612 }
1613 collision_cachedtrace_t;
1614
1615 static mempool_t *collision_cachedtrace_mempool;
1616 static collision_cachedtrace_t *collision_cachedtrace_array;
1617 static int collision_cachedtrace_firstfree;
1618 static int collision_cachedtrace_lastused;
1619 static int collision_cachedtrace_max;
1620 static int collision_cachedtrace_sequence;
1621 static int collision_cachedtrace_hashsize;
1622 static int *collision_cachedtrace_hash;
1623 static unsigned int *collision_cachedtrace_arrayfullhashindex;
1624 static unsigned int *collision_cachedtrace_arrayhashindex;
1625 static unsigned int *collision_cachedtrace_arraynext;
1626 static unsigned char *collision_cachedtrace_arrayused;
1627 static qboolean collision_cachedtrace_rebuildhash;
1628
1629 void Collision_Cache_Reset(qboolean resetlimits)
1630 {
1631         if (collision_cachedtrace_hash)
1632                 Mem_Free(collision_cachedtrace_hash);
1633         if (collision_cachedtrace_array)
1634                 Mem_Free(collision_cachedtrace_array);
1635         if (collision_cachedtrace_arrayfullhashindex)
1636                 Mem_Free(collision_cachedtrace_arrayfullhashindex);
1637         if (collision_cachedtrace_arrayhashindex)
1638                 Mem_Free(collision_cachedtrace_arrayhashindex);
1639         if (collision_cachedtrace_arraynext)
1640                 Mem_Free(collision_cachedtrace_arraynext);
1641         if (collision_cachedtrace_arrayused)
1642                 Mem_Free(collision_cachedtrace_arrayused);
1643         if (resetlimits || !collision_cachedtrace_max)
1644                 collision_cachedtrace_max = collision_cache.integer ? 128 : 1;
1645         collision_cachedtrace_firstfree = 1;
1646         collision_cachedtrace_lastused = 0;
1647         collision_cachedtrace_hashsize = collision_cachedtrace_max;
1648         collision_cachedtrace_array = (collision_cachedtrace_t *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(collision_cachedtrace_t));
1649         collision_cachedtrace_hash = (int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_hashsize * sizeof(int));
1650         collision_cachedtrace_arrayfullhashindex = (unsigned int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned int));
1651         collision_cachedtrace_arrayhashindex = (unsigned int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned int));
1652         collision_cachedtrace_arraynext = (unsigned int *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned int));
1653         collision_cachedtrace_arrayused = (unsigned char *)Mem_Alloc(collision_cachedtrace_mempool, collision_cachedtrace_max * sizeof(unsigned char));
1654         collision_cachedtrace_sequence = 1;
1655         collision_cachedtrace_rebuildhash = false;
1656 }
1657
1658 void Collision_Cache_Init(mempool_t *mempool)
1659 {
1660         collision_cachedtrace_mempool = mempool;
1661         Collision_Cache_Reset(true);
1662 }
1663
1664 static void Collision_Cache_RebuildHash(void)
1665 {
1666         int index;
1667         int range = collision_cachedtrace_lastused + 1;
1668         int sequence = collision_cachedtrace_sequence;
1669         int firstfree = collision_cachedtrace_max;
1670         int lastused = 0;
1671         int *hash = collision_cachedtrace_hash;
1672         unsigned int hashindex;
1673         unsigned int *arrayhashindex = collision_cachedtrace_arrayhashindex;
1674         unsigned int *arraynext = collision_cachedtrace_arraynext;
1675         collision_cachedtrace_rebuildhash = false;
1676         memset(collision_cachedtrace_hash, 0, collision_cachedtrace_hashsize * sizeof(int));
1677         for (index = 1;index < range;index++)
1678         {
1679                 if (collision_cachedtrace_arrayused[index] == sequence)
1680                 {
1681                         hashindex = arrayhashindex[index];
1682                         arraynext[index] = hash[hashindex];
1683                         hash[hashindex] = index;
1684                         lastused = index;
1685                 }
1686                 else
1687                 {
1688                         if (firstfree > index)
1689                                 firstfree = index;
1690                         collision_cachedtrace_arrayused[index] = 0;
1691                 }
1692         }
1693         collision_cachedtrace_firstfree = firstfree;
1694         collision_cachedtrace_lastused = lastused;
1695 }
1696
1697 void Collision_Cache_NewFrame(void)
1698 {
1699         if (collision_cache.integer)
1700         {
1701                 if (collision_cachedtrace_max < 128)
1702                         Collision_Cache_Reset(true);
1703         }
1704         else
1705         {
1706                 if (collision_cachedtrace_max > 1)
1707                         Collision_Cache_Reset(true);
1708         }
1709         // rebuild hash if sequence would overflow byte, otherwise increment
1710         if (collision_cachedtrace_sequence == 255)
1711         {
1712                 Collision_Cache_RebuildHash();
1713                 collision_cachedtrace_sequence = 1;
1714         }
1715         else
1716         {
1717                 collision_cachedtrace_rebuildhash = true;
1718                 collision_cachedtrace_sequence++;
1719         }
1720 }
1721
1722 static unsigned int Collision_Cache_HashIndexForArray(unsigned int *array, unsigned int size)
1723 {
1724         unsigned int i;
1725         unsigned int hashindex = 0;
1726         // this is a super-cheesy checksum, designed only for speed
1727         for (i = 0;i < size;i++)
1728                 hashindex += array[i] * (1 + i);
1729         return hashindex;
1730 }
1731
1732 static collision_cachedtrace_t *Collision_Cache_Lookup(dp_model_t *model, const matrix4x4_t *matrix, const matrix4x4_t *inversematrix, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
1733 {
1734         int hashindex = 0;
1735         unsigned int fullhashindex;
1736         int index = 0;
1737         int range;
1738         int sequence = collision_cachedtrace_sequence;
1739         int *hash = collision_cachedtrace_hash;
1740         unsigned int *arrayfullhashindex = collision_cachedtrace_arrayfullhashindex;
1741         unsigned int *arraynext = collision_cachedtrace_arraynext;
1742         collision_cachedtrace_t *cached = collision_cachedtrace_array + index;
1743         collision_cachedtrace_parameters_t params;
1744         // all non-cached traces use the same index
1745         if (!collision_cache.integer)
1746                 r_refdef.stats.collisioncache_traced++;
1747         else
1748         {
1749                 // cached trace lookup
1750                 memset(&params, 0, sizeof(params));
1751                 params.model = model;
1752                 VectorCopy(start, params.start);
1753                 VectorCopy(end,   params.end);
1754                 params.hitsupercontentsmask = hitsupercontentsmask;
1755                 params.matrix = *matrix;
1756                 fullhashindex = Collision_Cache_HashIndexForArray((unsigned int *)&params, sizeof(params) / sizeof(unsigned int));
1757                 hashindex = (int)(fullhashindex % (unsigned int)collision_cachedtrace_hashsize);
1758                 for (index = hash[hashindex];index;index = arraynext[index])
1759                 {
1760                         if (arrayfullhashindex[index] != fullhashindex)
1761                                 continue;
1762                         cached = collision_cachedtrace_array + index;
1763                         //if (memcmp(&cached->p, &params, sizeof(params)))
1764                         if (cached->p.model != params.model
1765                          || cached->p.end[0] != params.end[0]
1766                          || cached->p.end[1] != params.end[1]
1767                          || cached->p.end[2] != params.end[2]
1768                          || cached->p.start[0] != params.start[0]
1769                          || cached->p.start[1] != params.start[1]
1770                          || cached->p.start[2] != params.start[2]
1771                          || cached->p.hitsupercontentsmask != params.hitsupercontentsmask
1772                          || cached->p.matrix.m[0][0] != params.matrix.m[0][0]
1773                          || cached->p.matrix.m[0][1] != params.matrix.m[0][1]
1774                          || cached->p.matrix.m[0][2] != params.matrix.m[0][2]
1775                          || cached->p.matrix.m[0][3] != params.matrix.m[0][3]
1776                          || cached->p.matrix.m[1][0] != params.matrix.m[1][0]
1777                          || cached->p.matrix.m[1][1] != params.matrix.m[1][1]
1778                          || cached->p.matrix.m[1][2] != params.matrix.m[1][2]
1779                          || cached->p.matrix.m[1][3] != params.matrix.m[1][3]
1780                          || cached->p.matrix.m[2][0] != params.matrix.m[2][0]
1781                          || cached->p.matrix.m[2][1] != params.matrix.m[2][1]
1782                          || cached->p.matrix.m[2][2] != params.matrix.m[2][2]
1783                          || cached->p.matrix.m[2][3] != params.matrix.m[2][3]
1784                          || cached->p.matrix.m[3][0] != params.matrix.m[3][0]
1785                          || cached->p.matrix.m[3][1] != params.matrix.m[3][1]
1786                          || cached->p.matrix.m[3][2] != params.matrix.m[3][2]
1787                          || cached->p.matrix.m[3][3] != params.matrix.m[3][3]
1788                         )
1789                                 continue;
1790                         // found a matching trace in the cache
1791                         r_refdef.stats.collisioncache_cached++;
1792                         cached->valid = true;
1793                         collision_cachedtrace_arrayused[index] = collision_cachedtrace_sequence;
1794                         return cached;
1795                 }
1796                 r_refdef.stats.collisioncache_traced++;
1797                 // find an unused cache entry
1798                 for (index = collision_cachedtrace_firstfree, range = collision_cachedtrace_max;index < range;index++)
1799                         if (collision_cachedtrace_arrayused[index] == 0)
1800                                 break;
1801                 if (index == range)
1802                 {
1803                         // all claimed, but probably some are stale...
1804                         for (index = 1, range = collision_cachedtrace_max;index < range;index++)
1805                                 if (collision_cachedtrace_arrayused[index] != sequence)
1806                                         break;
1807                         if (index < range)
1808                         {
1809                                 // found a stale one, rebuild the hash
1810                                 Collision_Cache_RebuildHash();
1811                         }
1812                         else
1813                         {
1814                                 // we need to grow the cache
1815                                 collision_cachedtrace_max *= 2;
1816                                 Collision_Cache_Reset(false);
1817                                 index = 1;
1818                         }
1819                 }
1820                 // link the new cache entry into the hash bucket
1821                 collision_cachedtrace_firstfree = index + 1;
1822                 if (collision_cachedtrace_lastused < index)
1823                         collision_cachedtrace_lastused = index;
1824                 cached = collision_cachedtrace_array + index;
1825                 collision_cachedtrace_arraynext[index] = collision_cachedtrace_hash[hashindex];
1826                 collision_cachedtrace_hash[hashindex] = index;
1827                 collision_cachedtrace_arrayhashindex[index] = hashindex;
1828                 cached->valid = false;
1829                 cached->p = params;
1830                 collision_cachedtrace_arrayfullhashindex[index] = fullhashindex;
1831                 collision_cachedtrace_arrayused[index] = collision_cachedtrace_sequence;
1832         }
1833         return cached;
1834 }
1835
1836 void Collision_Cache_ClipLineToGenericEntitySurfaces(trace_t *trace, dp_model_t *model, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, const vec3_t end, int hitsupercontentsmask)
1837 {
1838         collision_cachedtrace_t *cached = Collision_Cache_Lookup(model, matrix, inversematrix, start, end, hitsupercontentsmask);
1839         if (cached->valid)
1840         {
1841                 *trace = cached->result;
1842                 return;
1843         }
1844
1845         Collision_ClipLineToGenericEntity(trace, model, NULL, NULL, vec3_origin, vec3_origin, 0, matrix, inversematrix, start, end, hitsupercontentsmask, true);
1846
1847         cached->result = *trace;
1848 }
1849
1850 void Collision_Cache_ClipLineToWorldSurfaces(trace_t *trace, dp_model_t *model, const vec3_t start, const vec3_t end, int hitsupercontents)
1851 {
1852         collision_cachedtrace_t *cached = Collision_Cache_Lookup(model, &identitymatrix, &identitymatrix, start, end, hitsupercontents);
1853         if (cached->valid)
1854         {
1855                 *trace = cached->result;
1856                 return;
1857         }
1858
1859         Collision_ClipLineToWorld(trace, model, start, end, hitsupercontents, true);
1860
1861         cached->result = *trace;
1862 }
1863
1864 void Collision_ClipToGenericEntity(trace_t *trace, dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask)
1865 {
1866         float starttransformed[3], endtransformed[3];
1867
1868         memset(trace, 0, sizeof(*trace));
1869         trace->fraction = trace->realfraction = 1;
1870
1871         Matrix4x4_Transform(inversematrix, start, starttransformed);
1872         Matrix4x4_Transform(inversematrix, end, endtransformed);
1873 #if COLLISIONPARANOID >= 3
1874         Con_Printf("trans(%f %f %f -> %f %f %f, %f %f %f -> %f %f %f)", start[0], start[1], start[2], starttransformed[0], starttransformed[1], starttransformed[2], end[0], end[1], end[2], endtransformed[0], endtransformed[1], endtransformed[2]);
1875 #endif
1876
1877         if (model && model->TraceBox)
1878         {
1879                 if(model->TraceBrush && (inversematrix->m[0][1] || inversematrix->m[0][2] || inversematrix->m[1][0] || inversematrix->m[1][2] || inversematrix->m[2][0] || inversematrix->m[2][1]))
1880                 {
1881                         // we get here if TraceBrush exists, AND we have a rotation component (SOLID_BSP case)
1882                         // using starttransformed, endtransformed is WRONG in this case!
1883                         // should rather build a brush and trace using it
1884                         colboxbrushf_t thisbrush_start, thisbrush_end;
1885                         Collision_BrushForBox(&thisbrush_start, mins, maxs, 0, 0, NULL);
1886                         Collision_BrushForBox(&thisbrush_end, mins, maxs, 0, 0, NULL);
1887                         Collision_TranslateBrush(start, &thisbrush_start.brush);
1888                         Collision_TranslateBrush(end, &thisbrush_end.brush);
1889                         Collision_TransformBrush(inversematrix, &thisbrush_start.brush);
1890                         Collision_TransformBrush(inversematrix, &thisbrush_end.brush);
1891                         //Collision_TranslateBrush(starttransformed, &thisbrush_start.brush);
1892                         //Collision_TranslateBrush(endtransformed, &thisbrush_end.brush);
1893                         model->TraceBrush(model, frameblend, skeleton, trace, &thisbrush_start.brush, &thisbrush_end.brush, hitsupercontentsmask);
1894                 }
1895                 else // this is only approximate if rotated, quite useless
1896                         model->TraceBox(model, frameblend, skeleton, trace, starttransformed, mins, maxs, endtransformed, hitsupercontentsmask);
1897         }
1898         else // and this requires that the transformation matrix doesn't have angles components, like SV_TraceBox ensures; FIXME may get called if a model is SOLID_BSP but has no TraceBox function
1899                 Collision_ClipTrace_Box(trace, bodymins, bodymaxs, starttransformed, mins, maxs, endtransformed, hitsupercontentsmask, bodysupercontents, 0, NULL);
1900         trace->fraction = bound(0, trace->fraction, 1);
1901         trace->realfraction = bound(0, trace->realfraction, 1);
1902
1903         VectorLerp(start, trace->fraction, end, trace->endpos);
1904         // transform plane
1905         // NOTE: this relies on plane.dist being directly after plane.normal
1906         Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal);
1907 }
1908
1909 void Collision_ClipToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontents)
1910 {
1911         memset(trace, 0, sizeof(*trace));
1912         trace->fraction = trace->realfraction = 1;
1913         // ->TraceBox: TraceBrush not needed here, as worldmodel is never rotated
1914         if (model && model->TraceBox)
1915                 model->TraceBox(model, NULL, NULL, trace, start, mins, maxs, end, hitsupercontents);
1916         trace->fraction = bound(0, trace->fraction, 1);
1917         trace->realfraction = bound(0, trace->realfraction, 1);
1918         VectorLerp(start, trace->fraction, end, trace->endpos);
1919 }
1920
1921 void Collision_ClipLineToGenericEntity(trace_t *trace, dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, const vec3_t end, int hitsupercontentsmask, qboolean hitsurfaces)
1922 {
1923         float starttransformed[3], endtransformed[3];
1924         memset(trace, 0, sizeof(*trace));
1925         trace->fraction = trace->realfraction = 1;
1926
1927         Matrix4x4_Transform(inversematrix, start, starttransformed);
1928         Matrix4x4_Transform(inversematrix, end, endtransformed);
1929 #if COLLISIONPARANOID >= 3
1930         Con_Printf("trans(%f %f %f -> %f %f %f, %f %f %f -> %f %f %f)", start[0], start[1], start[2], starttransformed[0], starttransformed[1], starttransformed[2], end[0], end[1], end[2], endtransformed[0], endtransformed[1], endtransformed[2]);
1931 #endif
1932
1933         if (model && model->TraceLineAgainstSurfaces && hitsurfaces)
1934                 model->TraceLineAgainstSurfaces(model, frameblend, skeleton, trace, starttransformed, endtransformed, hitsupercontentsmask);
1935         else if (model && model->TraceLine)
1936                 model->TraceLine(model, frameblend, skeleton, trace, starttransformed, endtransformed, hitsupercontentsmask);
1937         else
1938                 Collision_ClipTrace_Box(trace, bodymins, bodymaxs, starttransformed, vec3_origin, vec3_origin, endtransformed, hitsupercontentsmask, bodysupercontents, 0, NULL);
1939         trace->fraction = bound(0, trace->fraction, 1);
1940         trace->realfraction = bound(0, trace->realfraction, 1);
1941
1942         VectorLerp(start, trace->fraction, end, trace->endpos);
1943         // transform plane
1944         // NOTE: this relies on plane.dist being directly after plane.normal
1945         Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal);
1946 }
1947
1948 void Collision_ClipLineToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, const vec3_t end, int hitsupercontents, qboolean hitsurfaces)
1949 {
1950         memset(trace, 0, sizeof(*trace));
1951         trace->fraction = trace->realfraction = 1;
1952         if (model && model->TraceLineAgainstSurfaces && hitsurfaces)
1953                 model->TraceLineAgainstSurfaces(model, NULL, NULL, trace, start, end, hitsupercontents);
1954         else if (model && model->TraceLine)
1955                 model->TraceLine(model, NULL, NULL, trace, start, end, hitsupercontents);
1956         trace->fraction = bound(0, trace->fraction, 1);
1957         trace->realfraction = bound(0, trace->realfraction, 1);
1958         VectorLerp(start, trace->fraction, end, trace->endpos);
1959 }
1960
1961 void Collision_ClipPointToGenericEntity(trace_t *trace, dp_model_t *model, const frameblend_t *frameblend, const skeleton_t *skeleton, const vec3_t bodymins, const vec3_t bodymaxs, int bodysupercontents, matrix4x4_t *matrix, matrix4x4_t *inversematrix, const vec3_t start, int hitsupercontentsmask)
1962 {
1963         float starttransformed[3];
1964         memset(trace, 0, sizeof(*trace));
1965         trace->fraction = trace->realfraction = 1;
1966
1967         Matrix4x4_Transform(inversematrix, start, starttransformed);
1968 #if COLLISIONPARANOID >= 3
1969         Con_Printf("trans(%f %f %f -> %f %f %f)", start[0], start[1], start[2], starttransformed[0], starttransformed[1], starttransformed[2]);
1970 #endif
1971
1972         if (model && model->TracePoint)
1973                 model->TracePoint(model, NULL, NULL, trace, starttransformed, hitsupercontentsmask);
1974         else
1975                 Collision_ClipTrace_Point(trace, bodymins, bodymaxs, starttransformed, hitsupercontentsmask, bodysupercontents, 0, NULL);
1976
1977         VectorCopy(start, trace->endpos);
1978         // transform plane
1979         // NOTE: this relies on plane.dist being directly after plane.normal
1980         Matrix4x4_TransformPositivePlane(matrix, trace->plane.normal[0], trace->plane.normal[1], trace->plane.normal[2], trace->plane.dist, trace->plane.normal);
1981 }
1982
1983 void Collision_ClipPointToWorld(trace_t *trace, dp_model_t *model, const vec3_t start, int hitsupercontents)
1984 {
1985         memset(trace, 0, sizeof(*trace));
1986         trace->fraction = trace->realfraction = 1;
1987         if (model && model->TracePoint)
1988                 model->TracePoint(model, NULL, NULL, trace, start, hitsupercontents);
1989         VectorCopy(start, trace->endpos);
1990 }
1991
1992 void Collision_CombineTraces(trace_t *cliptrace, const trace_t *trace, void *touch, qboolean isbmodel)
1993 {
1994         // take the 'best' answers from the new trace and combine with existing data
1995         if (trace->allsolid)
1996                 cliptrace->allsolid = true;
1997         if (trace->startsolid)
1998         {
1999                 if (isbmodel)
2000                         cliptrace->bmodelstartsolid = true;
2001                 cliptrace->startsolid = true;
2002                 if (cliptrace->realfraction == 1)
2003                         cliptrace->ent = touch;
2004                 if (cliptrace->startdepth > trace->startdepth)
2005                 {
2006                         cliptrace->startdepth = trace->startdepth;
2007                         VectorCopy(trace->startdepthnormal, cliptrace->startdepthnormal);
2008                 }
2009         }
2010         // don't set this except on the world, because it can easily confuse
2011         // monsters underwater if there's a bmodel involved in the trace
2012         // (inopen && inwater is how they check water visibility)
2013         //if (trace->inopen)
2014         //      cliptrace->inopen = true;
2015         if (trace->inwater)
2016                 cliptrace->inwater = true;
2017         if ((trace->realfraction <= cliptrace->realfraction) && (VectorLength2(trace->plane.normal) > 0))
2018         {
2019                 cliptrace->fraction = trace->fraction;
2020                 cliptrace->realfraction = trace->realfraction;
2021                 VectorCopy(trace->endpos, cliptrace->endpos);
2022                 cliptrace->plane = trace->plane;
2023                 cliptrace->ent = touch;
2024                 cliptrace->hitsupercontents = trace->hitsupercontents;
2025                 cliptrace->hitq3surfaceflags = trace->hitq3surfaceflags;
2026                 cliptrace->hittexture = trace->hittexture;
2027         }
2028         cliptrace->startsupercontents |= trace->startsupercontents;
2029 }
2030
2031 void Collision_ShortenTrace(trace_t *trace, float shorten_factor, const vec3_t end)
2032 {
2033         // now undo our moving end 1 qu farther...
2034         trace->fraction = bound(trace->fraction, trace->fraction / shorten_factor - 1e-6, 1); // we subtract 1e-6 to guard for roundoff errors
2035         trace->realfraction = bound(trace->realfraction, trace->realfraction / shorten_factor - 1e-6, 1); // we subtract 1e-6 to guard for roundoff errors
2036         if(trace->fraction >= 1) // trace would NOT hit if not expanded!
2037         {
2038                 trace->fraction = 1;
2039                 trace->realfraction = 1;
2040                 VectorCopy(end, trace->endpos);
2041                 memset(&trace->plane, 0, sizeof(trace->plane));
2042                 trace->ent = NULL;
2043                 trace->hitsupercontentsmask = 0;
2044                 trace->hitsupercontents = 0;
2045                 trace->hitq3surfaceflags = 0;
2046                 trace->hittexture = NULL;
2047         }
2048 }