cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
+cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_friction), if less than 0 the cl_movement_friction variable is used instead"};
cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "2", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
+cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
+cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
cvar_t cl_gravity = {0, "cl_gravity", "800", "how much gravity to apply in client physics (should match sv_gravity)"};
cvar_t cl_slowmo = {0, "cl_slowmo", "1", "speed of game time (should match slowmo)"};
cvar_t cl_netinputpacketspersecond = {CVAR_SAVE, "cl_netinputpacketspersecond","50", "how many input packets to send to server each second"};
+cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
+
/*
================
float up, down;
if (in_speed.state & 1)
- speed = host_realframetime * cl_anglespeedkey.value;
+ speed = cl.realframetime * cl_anglespeedkey.value;
else
- speed = host_realframetime;
+ speed = cl.realframetime;
if (!(in_strafe.state & 1))
{
*/
void CL_Move (void)
{
- vec3_t temp;
float mx, my;
static float old_mouse_x = 0, old_mouse_y = 0;
// clamp before the move to prevent starting with bad angles
CL_AdjustAngles ();
- // get basic movement from keyboard
- // PRYDON_CLIENTCURSOR needs to survive basemove resets
- VectorCopy (cl.cmd.cursor_screen, temp);
- memset (&cl.cmd, 0, sizeof(cl.cmd));
- VectorCopy (temp, cl.cmd.cursor_screen);
+ // reset some of the command fields
+ cl.cmd.forwardmove = 0;
+ cl.cmd.sidemove = 0;
+ cl.cmd.upmove = 0;
+ // get basic movement from keyboard
if (in_strafe.state & 1)
{
cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
cl.cmd.cursor_screen[2] = 1;
- scale[0] = -r_refdef.frustum_x;
- scale[1] = -r_refdef.frustum_y;
+ scale[0] = -r_view.frustum_x;
+ scale[1] = -r_view.frustum_y;
scale[2] = 1;
// trace distance
// calculate current view matrix
V_CalcRefdef();
VectorClear(temp);
- Matrix4x4_Transform(&r_refdef.viewentitymatrix, temp, cl.cmd.cursor_start);
+ Matrix4x4_Transform(&r_view.matrix, temp, cl.cmd.cursor_start);
VectorSet(temp, cl.cmd.cursor_screen[2] * scale[2], cl.cmd.cursor_screen[0] * scale[0], cl.cmd.cursor_screen[1] * scale[1]);
- Matrix4x4_Transform(&r_refdef.viewentitymatrix, temp, cl.cmd.cursor_end);
+ Matrix4x4_Transform(&r_view.matrix, temp, cl.cmd.cursor_end);
// trace from view origin to the cursor
- cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl_entities[cl.playerentity].render : NULL, false);
- // makes sparks where cursor is
- //CL_SparkShower(cl.cmd.cursor_impact, cl.cmd.cursor_normal, 5, 0);
+ cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL, false);
+}
+
+void CL_ClientMovement_InputQW(qw_usercmd_t *cmd)
+{
+ int i;
+ int n;
+ // remove stale queue items
+ n = cl.movement_numqueue;
+ cl.movement_numqueue = 0;
+ for (i = 0;i < n;i++)
+ {
+ if (cl.movement_queue[i].sequence > cls.netcon->qw.incoming_sequence)
+ cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
+ else if (i == 0)
+ cl.movement_replay_canjump = !cl.movement_queue[i].jump; // FIXME: this logic is quite broken
+ }
+ // add to input queue if there is room
+ if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])))
+ {
+ // add to input queue
+ cl.movement_queue[cl.movement_numqueue].sequence = cls.netcon->qw.outgoing_sequence;
+ cl.movement_queue[cl.movement_numqueue].time = realtime;
+ cl.movement_queue[cl.movement_numqueue].frametime = cmd->msec / 1000.0;
+ VectorCopy(cmd->angles, cl.movement_queue[cl.movement_numqueue].viewangles);
+ cl.movement_queue[cl.movement_numqueue].move[0] = cmd->forwardmove;
+ cl.movement_queue[cl.movement_numqueue].move[1] = cmd->sidemove;
+ cl.movement_queue[cl.movement_numqueue].move[2] = cmd->upmove;
+ cl.movement_queue[cl.movement_numqueue].jump = (cmd->buttons & 2) != 0;
+ cl.movement_queue[cl.movement_numqueue].crouch = false;
+ cl.movement_numqueue++;
+ }
+ cl.movement_replay = true;
}
void CL_ClientMovement_Input(qboolean buttonjump, qboolean buttoncrouch)
{
int i;
int n;
+ double lasttime = (cls.protocol == PROTOCOL_DARKPLACES6 || cls.protocol == PROTOCOL_DARKPLACES7) ? cl.mtime[1] : (cl.movement_numqueue >= 0 ? cl.movement_queue[cl.movement_numqueue - 1].time : 0);
// remove stale queue items
n = cl.movement_numqueue;
cl.movement_numqueue = 0;
if (cl.servermovesequence)
{
for (i = 0;i < n;i++)
+ {
if (cl.movement_queue[i].sequence > cl.servermovesequence)
cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
+ else if (i == 0)
+ cl.movement_replay_canjump = !cl.movement_queue[i].jump; // FIXME: this logic is quite broken
+ }
}
else
{
- double simulatedtime = cl.mtime[0] + cl_movement_latency.value / 1000.0;
for (i = 0;i < n;i++)
- if (cl.movement_queue[i].time >= cl.mtime[0] && cl.movement_queue[i].time <= simulatedtime)
+ {
+ if (cl.movement_queue[i].time >= cl.mtime[0] - cl_movement_latency.value / 1000.0 && cl.movement_queue[i].time <= cl.mtime[0])
cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
+ else if (i == 0)
+ cl.movement_replay_canjump = !cl.movement_queue[i].jump; // FIXME: this logic is quite broken
+ }
}
// add to input queue if there is room
if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])) && cl.mtime[0] > cl.mtime[1])
{
// add to input queue
cl.movement_queue[cl.movement_numqueue].sequence = cl.movesequence;
- cl.movement_queue[cl.movement_numqueue].time = cl.mtime[0] + cl_movement_latency.value / 1000.0;
- cl.movement_queue[cl.movement_numqueue].frametime = cl.mtime[0] - cl.mtime[1];
+ cl.movement_queue[cl.movement_numqueue].time = cl.mtime[0];
+ cl.movement_queue[cl.movement_numqueue].frametime = bound(0, cl.mtime[0] - lasttime, 0.1);
VectorCopy(cl.viewangles, cl.movement_queue[cl.movement_numqueue].viewangles);
cl.movement_queue[cl.movement_numqueue].move[0] = cl.cmd.forwardmove;
cl.movement_queue[cl.movement_numqueue].move[1] = cl.cmd.sidemove;
cl.movement_replay = true;
}
-void CL_ClientMovement_Replay(void)
+typedef enum waterlevel_e
+{
+ WATERLEVEL_NONE,
+ WATERLEVEL_WETFEET,
+ WATERLEVEL_SWIMMING,
+ WATERLEVEL_SUBMERGED
+}
+waterlevel_t;
+
+typedef struct cl_clientmovement_state_s
+{
+ // position
+ vec3_t origin;
+ vec3_t velocity;
+ // current bounding box (different if crouched vs standing)
+ vec3_t mins;
+ vec3_t maxs;
+ // currently on the ground
+ qboolean onground;
+ // currently crouching
+ qboolean crouched;
+ // whether jump button has been released since last jump
+ qboolean canjump;
+ // what kind of water (SUPERCONTENTS_LAVA for instance)
+ int watertype;
+ // how deep
+ waterlevel_t waterlevel;
+ // weird hacks when jumping out of water
+ // (this is in seconds and counts down to 0)
+ float waterjumptime;
+
+ // movement parameters for physics code
+ float movevars_gravity;
+ float movevars_stopspeed;
+ float movevars_maxspeed;
+ float movevars_spectatormaxspeed;
+ float movevars_accelerate;
+ float movevars_airaccelerate;
+ float movevars_wateraccelerate;
+ float movevars_friction;
+ float movevars_waterfriction;
+ float movevars_entgravity;
+ float movevars_jumpvelocity;
+ float movevars_edgefriction;
+ float movevars_maxairspeed;
+ float movevars_stepheight;
+
+ // user command
+ client_movementqueue_t q;
+}
+cl_clientmovement_state_t;
+
+#define NUMOFFSETS 27
+static vec3_t offsets[NUMOFFSETS] =
+{
+// 1 no nudge (just return the original if this test passes)
+ { 0.000, 0.000, 0.000},
+// 6 simple nudges
+ { 0.000, 0.000, 0.125}, { 0.000, 0.000, -0.125},
+ {-0.125, 0.000, 0.000}, { 0.125, 0.000, 0.000},
+ { 0.000, -0.125, 0.000}, { 0.000, 0.125, 0.000},
+// 4 diagonal flat nudges
+ {-0.125, -0.125, 0.000}, { 0.125, -0.125, 0.000},
+ {-0.125, 0.125, 0.000}, { 0.125, 0.125, 0.000},
+// 8 diagonal upward nudges
+ {-0.125, 0.000, 0.125}, { 0.125, 0.000, 0.125},
+ { 0.000, -0.125, 0.125}, { 0.000, 0.125, 0.125},
+ {-0.125, -0.125, 0.125}, { 0.125, -0.125, 0.125},
+ {-0.125, 0.125, 0.125}, { 0.125, 0.125, 0.125},
+// 8 diagonal downward nudges
+ {-0.125, 0.000, -0.125}, { 0.125, 0.000, -0.125},
+ { 0.000, -0.125, -0.125}, { 0.000, 0.125, -0.125},
+ {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
+ {-0.125, 0.125, -0.125}, { 0.125, 0.125, -0.125},
+};
+
+qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
{
int i;
+ vec3_t neworigin;
+ for (i = 0;i < NUMOFFSETS;i++)
+ {
+ VectorAdd(offsets[i], s->origin, neworigin);
+ if (!CL_TraceBox(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true).startsolid)
+ {
+ VectorCopy(neworigin, s->origin);
+ return true;
+ }
+ }
+ // if all offsets failed, give up
+ return false;
+}
+
+void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
+{
+ vec3_t origin1, origin2;
+ trace_t trace;
+
+ // make sure player is not stuck
+ CL_ClientMovement_Unstick(s);
+
+ // set crouched
+ if (s->q.crouch)
+ {
+ // wants to crouch, this always works..
+ if (!s->crouched)
+ s->crouched = true;
+ }
+ else
+ {
+ // wants to stand, if currently crouching we need to check for a
+ // low ceiling first
+ if (s->crouched)
+ {
+ trace = CL_TraceBox(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ if (!trace.startsolid)
+ s->crouched = false;
+ }
+ }
+ if (s->crouched)
+ {
+ VectorCopy(cl.playercrouchmins, s->mins);
+ VectorCopy(cl.playercrouchmaxs, s->maxs);
+ }
+ else
+ {
+ VectorCopy(cl.playerstandmins, s->mins);
+ VectorCopy(cl.playerstandmaxs, s->maxs);
+ }
+
+ // set onground
+ VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
+ VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 2);
+ trace = CL_TraceBox(origin1, s->mins, s->maxs, origin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
+
+ // set watertype/waterlevel
+ VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
+ s->waterlevel = WATERLEVEL_NONE;
+ s->watertype = CL_TraceBox(origin1, vec3_origin, vec3_origin, origin1, true, NULL, 0, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
+ if (s->watertype)
+ {
+ s->waterlevel = WATERLEVEL_WETFEET;
+ origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
+ if (CL_TraceBox(origin1, vec3_origin, vec3_origin, origin1, true, NULL, 0, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
+ {
+ s->waterlevel = WATERLEVEL_SWIMMING;
+ origin1[2] = s->origin[2] + 22;
+ if (CL_TraceBox(origin1, vec3_origin, vec3_origin, origin1, true, NULL, 0, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
+ s->waterlevel = WATERLEVEL_SUBMERGED;
+ }
+ }
+
+ // water jump prediction
+ if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
+ s->waterjumptime = 0;
+}
+
+void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
+{
int bump;
- int contents;
- int crouch;
- int onground;
- double edgefriction;
- double frametime;
double t;
- vec_t wishspeed;
- vec_t addspeed;
- vec_t accelspeed;
vec_t f;
- vec_t *playermins;
- vec_t *playermaxs;
- vec3_t currentorigin;
- vec3_t currentvelocity;
- vec3_t forward;
- vec3_t right;
- vec3_t up;
- vec3_t wishvel;
- vec3_t wishdir;
vec3_t neworigin;
vec3_t currentorigin2;
vec3_t neworigin2;
- vec3_t yawangles;
+ vec3_t primalvelocity;
trace_t trace;
trace_t trace2;
trace_t trace3;
+ CL_ClientMovement_UpdateStatus(s);
+ VectorCopy(s->velocity, primalvelocity);
+ for (bump = 0, t = s->q.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
+ {
+ VectorMA(s->origin, t, s->velocity, neworigin);
+ trace = CL_TraceBox(s->origin, s->mins, s->maxs, neworigin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ if (trace.fraction < 1 && trace.plane.normal[2] == 0)
+ {
+ // may be a step or wall, try stepping up
+ // first move forward at a higher level
+ VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + s->movevars_stepheight);
+ VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + s->movevars_stepheight);
+ trace2 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ if (!trace2.startsolid)
+ {
+ // then move down from there
+ VectorCopy(trace2.endpos, currentorigin2);
+ VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
+ trace3 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
+ // accept the new trace if it made some progress
+ if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
+ {
+ trace = trace2;
+ VectorCopy(trace3.endpos, trace.endpos);
+ }
+ }
+ }
- if (!cl.movement_replay)
- return;
- cl.movement_replay = false;
+ // check if it moved at all
+ if (trace.fraction >= 0.001)
+ VectorCopy(trace.endpos, s->origin);
- // fetch current starting values
- VectorCopy(cl_entities[cl.playerentity].state_current.origin, currentorigin);
- VectorCopy(cl.mvelocity[0], currentvelocity);
- // FIXME: try minor nudges in various directions if startsolid to find a
- // safe place to start the walk (due to network compression in some
- // protocols this starts in solid)
- //currentorigin[2] += (1.0 / 32.0); // slight nudge to get out of the floor
- crouch = false; // this will be updated on first move
+ // check if it moved all the way
+ if (trace.fraction == 1)
+ break;
- // check if onground
- VectorSet(currentorigin2, currentorigin[0], currentorigin[1], currentorigin[2] + 1);
- VectorSet(neworigin2, currentorigin[0], currentorigin[1], currentorigin[2] - 1);
- trace = CL_TraceBox(currentorigin2, cl_playercrouchmins, cl_playercrouchmaxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true);
- onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
- //Con_Printf("%f: ", cl.mtime[0]);
+ //if (trace.plane.normal[2] > 0.7)
+ // s->onground = true;
+
+ t -= t * trace.fraction;
+
+ f = DotProduct(s->velocity, trace.plane.normal);
+ VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
+ }
+ if (s->waterjumptime > 0)
+ VectorCopy(primalvelocity, s->velocity);
+}
- // replay the input queue to predict current location
- // note: this relies on the fact there's always one queue item at the end
- for (i = 0;cl.movement && i < cl.movement_numqueue;i++)
+void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
+{
+ vec_t wishspeed;
+ vec_t f;
+ vec3_t wishvel;
+ vec3_t wishdir;
+
+ // water jump only in certain situations
+ // this mimics quakeworld code
+ if (s->q.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
{
- client_movementqueue_t *q = cl.movement_queue + bound(0, i, cl.movement_numqueue - 1);
- frametime = q->frametime;
- //Con_Printf(" %f", frametime);
- //if (frametime > 0)
+ vec3_t forward;
+ vec3_t yawangles;
+ vec3_t spot;
+ VectorSet(yawangles, 0, s->q.viewangles[1], 0);
+ AngleVectors(yawangles, forward, NULL, NULL);
+ VectorMA(s->origin, 24, forward, spot);
+ spot[2] += 8;
+ if (CL_TraceBox(spot, vec3_origin, vec3_origin, spot, true, NULL, 0, false).startsolid)
{
- if (q->crouch)
+ spot[2] += 24;
+ if (!CL_TraceBox(spot, vec3_origin, vec3_origin, spot, true, NULL, 0, false).startsolid)
{
- // wants to crouch, this always works...
- if (!crouch)
- crouch = true;
- }
- else
- {
- // wants to stand, if currently crouching we need to check for a
- // low ceiling first
- if (crouch)
- {
- trace = CL_TraceBox(currentorigin, cl_playerstandmins, cl_playerstandmaxs, currentorigin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true);
- if (!trace.startsolid)
- crouch = false;
- }
- }
- if (crouch)
- {
- playermins = cl_playercrouchmins;
- playermaxs = cl_playercrouchmaxs;
- }
- else
- {
- playermins = cl_playerstandmins;
- playermaxs = cl_playerstandmaxs;
- }
- // change velocity according to q->viewangles and q->move
- contents = CL_PointSuperContents(currentorigin);
- if (contents & SUPERCONTENTS_LIQUIDSMASK)
- {
- // swim
- AngleVectors(q->viewangles, forward, right, up);
- VectorSet(up, 0, 0, 1);
- VectorMAMAM(q->move[0], forward, q->move[1], right, q->move[2], up, wishvel);
- wishspeed = VectorLength(wishvel);
- if (wishspeed)
- VectorScale(wishvel, 1 / wishspeed, wishdir);
- else
- VectorSet( wishdir, 0.0, 0.0, 0.0 );
- wishspeed = min(wishspeed, cl_movement_maxspeed.value);
- if (crouch)
- wishspeed *= 0.5;
- wishspeed *= 0.6;
- VectorScale(currentvelocity, (1 - frametime * cl_movement_friction.value), currentvelocity);
- f = wishspeed - DotProduct(currentvelocity, wishdir);
- if (f > 0)
- {
- f = min(f, cl_movement_accelerate.value * frametime * wishspeed);
- VectorMA(currentvelocity, f, wishdir, currentvelocity);
- }
- if (q->jump)
- {
- if (contents & SUPERCONTENTS_LAVA)
- currentvelocity[2] = 50;
- else if (contents & SUPERCONTENTS_SLIME)
- currentvelocity[2] = 80;
- else
- {
- if (gamemode == GAME_NEXUIZ)
- currentvelocity[2] = 200;
- else
- currentvelocity[2] = 100;
- }
- }
+ VectorScale(forward, 50, s->velocity);
+ s->velocity[2] = 310;
+ s->waterjumptime = 2;
+ s->onground = false;
+ s->canjump = false;
}
+ }
+ }
+
+ if (!VectorLength2(s->q.move))
+ {
+ // drift towards bottom
+ VectorSet(wishvel, 0, 0, -60);
+ }
+ else
+ {
+ // swim
+ vec3_t forward;
+ vec3_t right;
+ vec3_t up;
+ // calculate movement vector
+ AngleVectors(s->q.viewangles, forward, right, up);
+ VectorSet(up, 0, 0, 1);
+ VectorMAMAM(s->q.move[0], forward, s->q.move[1], right, s->q.move[2], up, wishvel);
+ }
+
+ // split wishvel into wishspeed and wishdir
+ wishspeed = VectorLength(wishvel);
+ if (wishspeed)
+ VectorScale(wishvel, 1 / wishspeed, wishdir);
+ else
+ VectorSet( wishdir, 0.0, 0.0, 0.0 );
+ wishspeed = min(wishspeed, s->movevars_maxspeed) * 0.7;
+
+ if (s->crouched)
+ wishspeed *= 0.5;
+
+ if (s->waterjumptime <= 0)
+ {
+ // water friction
+ f = 1 - s->q.frametime * s->movevars_waterfriction * s->waterlevel;
+ f = bound(0, f, 1);
+ VectorScale(s->velocity, f, s->velocity);
+
+ // water acceleration
+ f = wishspeed - DotProduct(s->velocity, wishdir);
+ if (f > 0)
+ {
+ f = min(s->movevars_wateraccelerate * s->q.frametime * wishspeed, f);
+ VectorMA(s->velocity, f, wishdir, s->velocity);
+ }
+
+ // holding jump button swims upward slowly
+ if (s->q.jump)
+ {
+ if (s->watertype & SUPERCONTENTS_LAVA)
+ s->velocity[2] = 50;
+ else if (s->watertype & SUPERCONTENTS_SLIME)
+ s->velocity[2] = 80;
else
{
- // walk
- if (onground && q->jump)
- {
- currentvelocity[2] += cl_movement_jumpvelocity.value;
- onground = false;
- }
- VectorSet(yawangles, 0, q->viewangles[1], 0);
- AngleVectors(yawangles, forward, right, up);
- VectorMAM(q->move[0], forward, q->move[1], right, wishvel);
- wishspeed = VectorLength(wishvel);
- if (wishspeed)
- VectorScale(wishvel, 1 / wishspeed, wishdir);
- else
- VectorSet( wishdir, 0.0, 0.0, 0.0 );
- wishspeed = min(wishspeed, cl_movement_maxspeed.value);
- if (crouch)
- wishspeed *= 0.5;
- // check if onground
- if (onground)
- {
- // apply ground friction
- f = sqrt(currentvelocity[0] * currentvelocity[0] + currentvelocity[1] * currentvelocity[1]);
- edgefriction = 1;
- if (f > 0)
- {
- VectorSet(currentorigin2, currentorigin[0] + currentvelocity[0]*(16/f), currentorigin[1] + currentvelocity[1]*(16/f), currentorigin[2] + playermins[2]);
- VectorSet(neworigin2, currentorigin2[0], currentorigin2[1], currentorigin2[2] - 34);
- trace = CL_TraceBox(currentorigin2, vec3_origin, vec3_origin, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true);
- if (trace.fraction == 1)
- edgefriction = cl_movement_edgefriction.value;
- }
- // apply friction
- f = 1 - frametime * edgefriction * ((f < cl_movement_stopspeed.value) ? (cl_movement_stopspeed.value / f) : 1) * cl_movement_friction.value;
- f = max(f, 0);
- VectorScale(currentvelocity, f, currentvelocity);
- }
- else
- {
- // apply air speed limit
- wishspeed = min(wishspeed, cl_movement_maxairspeed.value);
- }
if (gamemode == GAME_NEXUIZ)
- addspeed = wishspeed;
+ s->velocity[2] = 200;
else
- addspeed = wishspeed - DotProduct(currentvelocity, wishdir);
- if (addspeed > 0)
- {
- accelspeed = min(cl_movement_accelerate.value * frametime * wishspeed, addspeed);
- VectorMA(currentvelocity, accelspeed, wishdir, currentvelocity);
- }
- currentvelocity[2] -= cl_gravity.value * frametime;
+ s->velocity[2] = 100;
}
}
- //if (i < cl.movement_numqueue - 1 || (cl_movement.integer & 4))
+ }
+
+ CL_ClientMovement_Move(s);
+}
+
+void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
+{
+ vec_t friction;
+ vec_t wishspeed;
+ vec_t addspeed;
+ vec_t accelspeed;
+ vec_t f;
+ vec3_t forward;
+ vec3_t right;
+ vec3_t up;
+ vec3_t wishvel;
+ vec3_t wishdir;
+ vec3_t yawangles;
+ trace_t trace;
+
+ // jump if on ground with jump button pressed but only if it has been
+ // released at least once since the last jump
+ if (s->q.jump && s->onground)// && s->canjump) // FIXME: canjump doesn't work properly
+ {
+ s->velocity[2] += s->movevars_jumpvelocity;
+ s->onground = false;
+ s->canjump = false;
+ }
+
+ // calculate movement vector
+ VectorSet(yawangles, 0, s->q.viewangles[1], 0);
+ AngleVectors(yawangles, forward, right, up);
+ VectorMAM(s->q.move[0], forward, s->q.move[1], right, wishvel);
+
+ // split wishvel into wishspeed and wishdir
+ wishspeed = VectorLength(wishvel);
+ if (wishspeed)
+ VectorScale(wishvel, 1 / wishspeed, wishdir);
+ else
+ VectorSet( wishdir, 0.0, 0.0, 0.0 );
+ wishspeed = min(wishspeed, s->movevars_maxspeed);
+ if (s->crouched)
+ wishspeed *= 0.5;
+
+ // check if onground
+ if (s->onground)
+ {
+ // apply edge friction
+ f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
+ friction = s->movevars_friction;
+ if (f > 0 && s->movevars_edgefriction != 1)
+ {
+ vec3_t neworigin2;
+ vec3_t neworigin3;
+ // note: QW uses the full player box for the trace, and yet still
+ // uses s->origin[2] + s->mins[2], which is clearly an bug, but
+ // this mimics it for compatibility
+ VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
+ VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
+ if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ trace = CL_TraceBox(neworigin2, s->mins, s->maxs, neworigin3, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ else
+ trace = CL_TraceBox(neworigin2, vec3_origin, vec3_origin, neworigin3, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true);
+ if (trace.fraction == 1 && !trace.startsolid)
+ friction *= s->movevars_edgefriction;
+ }
+ // apply ground friction
+ f = 1 - s->q.frametime * friction * ((f < s->movevars_stopspeed) ? (s->movevars_stopspeed / f) : 1);
+ f = max(f, 0);
+ VectorScale(s->velocity, f, s->velocity);
+ addspeed = wishspeed - DotProduct(s->velocity, wishdir);
+ if (addspeed > 0)
{
- if (crouch)
- {
- playermins = cl_playercrouchmins;
- playermaxs = cl_playercrouchmaxs;
- }
+ accelspeed = min(s->movevars_accelerate * s->q.frametime * wishspeed, addspeed);
+ VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
+ }
+ s->velocity[2] -= cl_gravity.value * s->q.frametime;
+ if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ s->velocity[2] = 0;
+ if (VectorLength2(s->velocity))
+ CL_ClientMovement_Move(s);
+ }
+ else
+ {
+ if (s->waterjumptime <= 0)
+ {
+ // apply air speed limit
+ wishspeed = min(wishspeed, s->movevars_maxairspeed);
+ // Nexuiz has no upper bound on air acceleration, but little control
+ if (gamemode == GAME_NEXUIZ)
+ addspeed = wishspeed;
else
+ addspeed = wishspeed - DotProduct(s->velocity, wishdir);
+ if (addspeed > 0)
{
- playermins = cl_playerstandmins;
- playermaxs = cl_playerstandmaxs;
+ accelspeed = min(s->movevars_accelerate * s->q.frametime * wishspeed, addspeed);
+ VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
}
- onground = false;
- for (bump = 0, t = frametime;bump < 8 && VectorLength2(currentvelocity) > 0;bump++)
+ }
+ s->velocity[2] -= cl_gravity.value * s->q.frametime;
+ CL_ClientMovement_Move(s);
+ }
+}
+
+void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
+{
+ //Con_Printf(" %f", frametime);
+ if (!s->q.jump)
+ s->canjump = true;
+ s->waterjumptime -= s->q.frametime;
+ CL_ClientMovement_UpdateStatus(s);
+ if (s->waterlevel >= WATERLEVEL_SWIMMING)
+ CL_ClientMovement_Physics_Swim(s);
+ else
+ CL_ClientMovement_Physics_Walk(s);
+}
+
+void CL_ClientMovement_Replay(void)
+{
+ int i;
+ cl_clientmovement_state_t s;
+
+ if (!cl.movement_replay)
+ return;
+ cl.movement_replay = false;
+
+ // set up starting state for the series of moves
+ memset(&s, 0, sizeof(s));
+ VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
+ VectorCopy(cl.mvelocity[0], s.velocity);
+ s.crouched = true; // will be updated on first move
+ s.canjump = cl.movement_replay_canjump;
+
+ // set up movement variables
+ if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ {
+ s.movevars_gravity = cl.qw_movevars_gravity;
+ s.movevars_stopspeed = cl.qw_movevars_stopspeed;
+ s.movevars_maxspeed = cl.qw_movevars_maxspeed;
+ s.movevars_spectatormaxspeed = cl.qw_movevars_spectatormaxspeed;
+ s.movevars_accelerate = cl.qw_movevars_accelerate;
+ s.movevars_airaccelerate = cl.qw_movevars_airaccelerate;
+ s.movevars_wateraccelerate = cl.qw_movevars_wateraccelerate;
+ s.movevars_friction = cl.qw_movevars_friction;
+ s.movevars_waterfriction = cl.qw_movevars_waterfriction;
+ s.movevars_entgravity = cl.qw_movevars_entgravity;
+ s.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
+ s.movevars_edgefriction = cl_movement_edgefriction.value;
+ s.movevars_maxairspeed = cl_movement_maxairspeed.value;
+ s.movevars_stepheight = cl_movement_stepheight.value;
+ }
+ else
+ {
+ s.movevars_gravity = sv_gravity.value;
+ s.movevars_stopspeed = cl_movement_stopspeed.value;
+ s.movevars_maxspeed = cl_movement_maxspeed.value;
+ s.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
+ s.movevars_accelerate = cl_movement_accelerate.value;
+ s.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
+ s.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
+ s.movevars_friction = cl_movement_friction.value;
+ s.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
+ s.movevars_entgravity = 1;
+ s.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
+ s.movevars_edgefriction = cl_movement_edgefriction.value;
+ s.movevars_maxairspeed = cl_movement_maxairspeed.value;
+ s.movevars_stepheight = cl_movement_stepheight.value;
+ }
+
+ cl.movement_predicted = (cl_movement.integer && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission) && ((cls.protocol != PROTOCOL_DARKPLACES6 && cls.protocol != PROTOCOL_DARKPLACES7) || cl.servermovesequence);
+ if (cl.movement_predicted)
+ {
+ //Con_Printf("%f: ", cl.mtime[0]);
+
+ // replay the input queue to predict current location
+ // note: this relies on the fact there's always one queue item at the end
+
+ for (i = 0;i < cl.movement_numqueue;i++)
+ {
+ s.q = cl.movement_queue[i];
+ // if a move is more than 50ms, do it as two moves (matching qwsv)
+ if (s.q.frametime > 0.05)
{
- VectorMA(currentorigin, t, currentvelocity, neworigin);
- trace = CL_TraceBox(currentorigin, playermins, playermaxs, neworigin, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true);
- if (trace.fraction < 1 && trace.plane.normal[2] == 0)
- {
- // may be a step or wall, try stepping up
- // first move forward at a higher level
- VectorSet(currentorigin2, currentorigin[0], currentorigin[1], currentorigin[2] + cl_movement_stepheight.value);
- VectorSet(neworigin2, neworigin[0], neworigin[1], currentorigin[2] + cl_movement_stepheight.value);
- trace2 = CL_TraceBox(currentorigin2, playermins, playermaxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true);
- // then move down from there
- VectorCopy(trace2.endpos, currentorigin2);
- VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], currentorigin[2]);
- trace3 = CL_TraceBox(currentorigin2, playermins, playermaxs, neworigin2, true, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true);
- //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
- // accept the new trace if it made some progress
- if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
- {
- trace = trace2;
- VectorCopy(trace3.endpos, trace.endpos);
- }
- }
- if (trace.fraction == 1)
- {
- VectorCopy(trace.endpos, currentorigin);
- break;
- }
- if (trace.plane.normal[2] > 0.7)
- onground = true;
- t *= 1 - trace.fraction;
- if (trace.fraction >= 0.001)
- VectorCopy(trace.endpos, currentorigin);
- f = DotProduct(currentvelocity, trace.plane.normal);
- VectorMA(currentvelocity, -f, trace.plane.normal, currentvelocity);
+ s.q.frametime *= 0.5;
+ CL_ClientMovement_PlayerMove(&s);
}
+ CL_ClientMovement_PlayerMove(&s);
}
}
+ else
+ {
+ // get the first movement queue entry to know whether to crouch and such
+ s.q = cl.movement_queue[0];
+ }
// store replay location
+ CL_ClientMovement_UpdateStatus(&s);
+ cl.onground = s.onground;
+ cl.movement_time[1] = cl.movement_time[0];
+ cl.movement_time[0] = cl.movement_queue[cl.movement_numqueue-1].time;
VectorCopy(cl.movement_origin, cl.movement_oldorigin);
- VectorCopy(currentorigin, cl.movement_origin);
- VectorCopy(currentvelocity, cl.movement_velocity);
- //VectorCopy(currentorigin, cl_entities[cl.playerentity].state_current.origin);
- //VectorSet(cl_entities[cl.playerentity].state_current.angles, 0, cl.viewangles[1], 0);
+ VectorCopy(s.origin, cl.movement_origin);
+ VectorCopy(s.velocity, cl.movement_velocity);
+ //VectorCopy(s.origin, cl.entities[cl.playerentity].state_current.origin);
+ //VectorSet(cl.entities[cl.playerentity].state_current.angles, 0, cl.viewangles[1], 0);
+}
+
+void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, qw_usercmd_t *from, qw_usercmd_t *to)
+{
+ int bits;
+
+ bits = 0;
+ if (to->angles[0] != from->angles[0])
+ bits |= QW_CM_ANGLE1;
+ if (to->angles[1] != from->angles[1])
+ bits |= QW_CM_ANGLE2;
+ if (to->angles[2] != from->angles[2])
+ bits |= QW_CM_ANGLE3;
+ if (to->forwardmove != from->forwardmove)
+ bits |= QW_CM_FORWARD;
+ if (to->sidemove != from->sidemove)
+ bits |= QW_CM_SIDE;
+ if (to->upmove != from->upmove)
+ bits |= QW_CM_UP;
+ if (to->buttons != from->buttons)
+ bits |= QW_CM_BUTTONS;
+ if (to->impulse != from->impulse)
+ bits |= QW_CM_IMPULSE;
+
+ MSG_WriteByte(buf, bits);
+ if (bits & QW_CM_ANGLE1)
+ MSG_WriteAngle16i(buf, to->angles[0]);
+ if (bits & QW_CM_ANGLE2)
+ MSG_WriteAngle16i(buf, to->angles[1]);
+ if (bits & QW_CM_ANGLE3)
+ MSG_WriteAngle16i(buf, to->angles[2]);
+ if (bits & QW_CM_FORWARD)
+ MSG_WriteShort(buf, to->forwardmove);
+ if (bits & QW_CM_SIDE)
+ MSG_WriteShort(buf, to->sidemove);
+ if (bits & QW_CM_UP)
+ MSG_WriteShort(buf, to->upmove);
+ if (bits & QW_CM_BUTTONS)
+ MSG_WriteByte(buf, to->buttons);
+ if (bits & QW_CM_IMPULSE)
+ MSG_WriteByte(buf, to->impulse);
+ MSG_WriteByte(buf, to->msec);
}
/*
accumtotal++;
#endif
- if (cl_movement.integer && cls.signon == SIGNONS)
+ if (cl_movement.integer && cls.signon == SIGNONS && cls.protocol != PROTOCOL_QUAKEWORLD)
{
if (!cl.movement_needupdate)
return;
cl.movement_needupdate = false;
- cl.movement = cl.stats[STAT_HEALTH] > 0 && !cl.intermission;
}
else
{
- cl.movement = false;
if (realtime < lastsendtime + 1.0 / bound(10, cl_netinputpacketspersecond.value, 100))
return;
// don't let it fall behind if CL_SendMove hasn't been called recently
// PROTOCOL_DARKPLACES5 clc_move = 19 bytes total
// PROTOCOL_DARKPLACES6 clc_move = 52 bytes total
// PROTOCOL_DARKPLACES7 clc_move = 56 bytes total
- if (cl.protocol == PROTOCOL_QUAKE || cl.protocol == PROTOCOL_QUAKEDP || cl.protocol == PROTOCOL_NEHAHRAMOVIE)
+ // PROTOCOL_QUAKEWORLD clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
+ if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ {
+ int checksumindex;
+ double msectime;
+ static double oldmsectime;
+ qw_usercmd_t *cmd, *oldcmd;
+ qw_usercmd_t nullcmd;
+
+ //Con_Printf("code qw_clc_move\n");
+
+ i = cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK;
+ cmd = &cl.qw_moves[i];
+ memset(&nullcmd, 0, sizeof(nullcmd));
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->buttons = bits;
+ cmd->impulse = impulse;
+ cmd->forwardmove = (short)bound(-32768, forwardmove, 32767);
+ cmd->sidemove = (short)bound(-32768, sidemove, 32767);
+ cmd->upmove = (short)bound(-32768, upmove, 32767);
+ VectorCopy(cl.viewangles, cmd->angles);
+ msectime = realtime * 1000;
+ cmd->msec = (unsigned char)bound(0, msectime - oldmsectime, 255);
+ // ridiculous value rejection (matches qw)
+ if (cmd->msec > 250)
+ cmd->msec = 100;
+ oldmsectime = msectime;
+
+ CL_ClientMovement_InputQW(cmd);
+
+ MSG_WriteByte(&buf, qw_clc_move);
+ // save the position for a checksum byte
+ checksumindex = buf.cursize;
+ MSG_WriteByte(&buf, 0);
+ // packet loss percentage
+ // FIXME: netgraph stuff
+ MSG_WriteByte(&buf, 0);
+ // write most recent 3 moves
+ i = (cls.netcon->qw.outgoing_sequence-2) & QW_UPDATE_MASK;
+ cmd = &cl.qw_moves[i];
+ QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, cmd);
+ oldcmd = cmd;
+ i = (cls.netcon->qw.outgoing_sequence-1) & QW_UPDATE_MASK;
+ cmd = &cl.qw_moves[i];
+ QW_MSG_WriteDeltaUsercmd(&buf, oldcmd, cmd);
+ oldcmd = cmd;
+ i = cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK;
+ cmd = &cl.qw_moves[i];
+ QW_MSG_WriteDeltaUsercmd(&buf, oldcmd, cmd);
+ // calculate the checksum
+ buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->qw.outgoing_sequence);
+ // if delta compression history overflows, request no delta
+ if (cls.netcon->qw.outgoing_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
+ cl.qw_validsequence = 0;
+ // request delta compression if appropriate
+ if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
+ {
+ cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
+ MSG_WriteByte(&buf, qw_clc_delta);
+ MSG_WriteByte(&buf, cl.qw_validsequence & 255);
+ }
+ else
+ cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = -1;
+ }
+ else if (cls.protocol == PROTOCOL_QUAKE || cls.protocol == PROTOCOL_QUAKEDP || cls.protocol == PROTOCOL_NEHAHRAMOVIE)
{
// 5 bytes
MSG_WriteByte (&buf, clc_move);
// 2 bytes
MSG_WriteByte (&buf, bits);
MSG_WriteByte (&buf, impulse);
+
+ CL_ClientMovement_Input((bits & 2) != 0, false);
}
- else if (cl.protocol == PROTOCOL_DARKPLACES2 || cl.protocol == PROTOCOL_DARKPLACES3)
+ else if (cls.protocol == PROTOCOL_DARKPLACES2 || cls.protocol == PROTOCOL_DARKPLACES3)
{
// 5 bytes
MSG_WriteByte (&buf, clc_move);
// 2 bytes
MSG_WriteByte (&buf, bits);
MSG_WriteByte (&buf, impulse);
+
+ CL_ClientMovement_Input((bits & 2) != 0, false);
}
- else if (cl.protocol == PROTOCOL_DARKPLACES1 || cl.protocol == PROTOCOL_DARKPLACES4 || cl.protocol == PROTOCOL_DARKPLACES5)
+ else if (cls.protocol == PROTOCOL_DARKPLACES1 || cls.protocol == PROTOCOL_DARKPLACES4 || cls.protocol == PROTOCOL_DARKPLACES5)
{
// 5 bytes
MSG_WriteByte (&buf, clc_move);
// 2 bytes
MSG_WriteByte (&buf, bits);
MSG_WriteByte (&buf, impulse);
+
+ CL_ClientMovement_Input((bits & 2) != 0, false);
}
else
{
// 5 bytes
MSG_WriteByte (&buf, clc_move);
- if (cl.protocol != PROTOCOL_DARKPLACES6)
+ if (cls.protocol != PROTOCOL_DARKPLACES6)
{
if (cl_movement.integer)
{
MSG_WriteByte (&buf, impulse);
// PRYDON_CLIENTCURSOR
// 30 bytes
- MSG_WriteShort (&buf, cl.cmd.cursor_screen[0] * 32767.0f);
- MSG_WriteShort (&buf, cl.cmd.cursor_screen[1] * 32767.0f);
+ MSG_WriteShort (&buf, (short)(cl.cmd.cursor_screen[0] * 32767.0f));
+ MSG_WriteShort (&buf, (short)(cl.cmd.cursor_screen[1] * 32767.0f));
MSG_WriteFloat (&buf, cl.cmd.cursor_start[0]);
MSG_WriteFloat (&buf, cl.cmd.cursor_start[1]);
MSG_WriteFloat (&buf, cl.cmd.cursor_start[2]);
MSG_WriteFloat (&buf, cl.cmd.cursor_impact[1]);
MSG_WriteFloat (&buf, cl.cmd.cursor_impact[2]);
MSG_WriteShort (&buf, cl.cmd.cursor_entitynumber);
- }
- // FIXME: bits & 16 is +button5, Nexuiz specific
- CL_ClientMovement_Input((bits & 2) != 0, (bits & 16) != 0);
+ // FIXME: bits & 16 is +button5, Nexuiz specific
+ CL_ClientMovement_Input((bits & 2) != 0, (bits & 16) != 0);
+ }
}
- // ack the last few frame numbers
- // (redundent to improve handling of client->server packet loss)
- // for LATESTFRAMENUMS == 3 case this is 15 bytes
- for (i = 0;i < LATESTFRAMENUMS;i++)
+ if (cls.protocol != PROTOCOL_QUAKEWORLD)
{
- if (cl.latestframenums[i] > 0)
+ // ack the last few frame numbers
+ // (redundent to improve handling of client->server packet loss)
+ // for LATESTFRAMENUMS == 3 case this is 15 bytes
+ for (i = 0;i < LATESTFRAMENUMS;i++)
{
- if (developer_networkentities.integer >= 1)
- Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
- MSG_WriteByte(&buf, clc_ackframe);
- MSG_WriteLong(&buf, cl.latestframenums[i]);
+ if (cl.latestframenums[i] > 0)
+ {
+ if (developer_networkentities.integer >= 1)
+ Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
+ MSG_WriteByte(&buf, clc_ackframe);
+ MSG_WriteLong(&buf, cl.latestframenums[i]);
+ }
}
}
}
// send the reliable message (forwarded commands) if there is one
- NetConn_SendUnreliableMessage(cls.netcon, &buf);
+ NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol);
if (cls.netcon->message.overflowed)
{
Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button3");
- Cmd_AddCommand ("+button5", IN_Button5Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button3");
- Cmd_AddCommand ("+button6", IN_Button6Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button3");
- Cmd_AddCommand ("+button7", IN_Button7Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button3");
- Cmd_AddCommand ("+button8", IN_Button8Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button3");
- Cmd_AddCommand ("+button9", IN_Button9Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button3");
- Cmd_AddCommand ("+button10", IN_Button10Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button3");
- Cmd_AddCommand ("+button11", IN_Button11Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button3");
- Cmd_AddCommand ("+button12", IN_Button12Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button3");
- Cmd_AddCommand ("+button13", IN_Button13Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button3");
- Cmd_AddCommand ("+button14", IN_Button14Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button3");
- Cmd_AddCommand ("+button15", IN_Button15Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button3");
- Cmd_AddCommand ("+button16", IN_Button16Down, "activate button4 (behavior depends on mod)");
- Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button3");
+ Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
+ Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
+ Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
+ Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
+ Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
+ Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
+ Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
+ Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
+ Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
+ Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
+ Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
+ Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
+ Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
+ Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
+ Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
+ Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
+ Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
+ Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
+ Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
+ Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
+ Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
+ Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
+ Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
+ Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
+ Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
Cvar_RegisterVariable(&cl_movement);
Cvar_RegisterVariable(&cl_movement_latency);
Cvar_RegisterVariable(&m_filter);
Cvar_RegisterVariable(&cl_netinputpacketspersecond);
+
+ Cvar_RegisterVariable(&cl_nodelta);
}
projects / xonotic / darkplaces.git / blobdiff