// if we couldn't find any of the weapons, there's nothing more we can do...
}
+#if 0
void IN_CycleWeapon (void)
{
int i, n;
}
// if we couldn't find any of the weapons, there's nothing more we can do...
}
+#endif
/*
===============
float val;
qboolean impulsedown, impulseup, down;
- impulsedown = key->state & 2;
- impulseup = key->state & 4;
- down = key->state & 1;
+ impulsedown = (key->state & 2) != 0;
+ impulseup = (key->state & 4) != 0;
+ down = (key->state & 1) != 0;
val = 0;
if (impulsedown && !impulseup)
cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
+cvar_t cl_movecliptokeyboard = {0, "cl_movecliptokeyboard", "0", "if set to 1, any move is clipped to the nine keyboard states; if set to 2, only the direction is clipped, not the amount"};
cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
+cvar_t cl_movement_replay = {0, "cl_movement_replay", "1", "use engine prediction"};
+cvar_t cl_movement_nettimeout = {CVAR_SAVE, "cl_movement_nettimeout", "0.3", "stops predicting moves when server is lagging badly (avoids major performance problems), timeout in seconds"};
cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
-cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "2", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
+cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "1", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
-cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (should match sv_airaccel_qw)"};
-cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction)"};
+cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (reduces speed gain when zigzagging) (should match sv_airaccel_qw); when < 0, the speed is clamped against the maximum allowed forward speed after the move"};
+cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction); when < 0, only so much friction is applied that braking (by accelerating backwards) cannot be stronger"};
cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
+cvar_t m_accelerate = {CVAR_SAVE, "m_accelerate","1", "mouse acceleration factor (try 2)"};
+cvar_t m_accelerate_minspeed = {CVAR_SAVE, "m_accelerate_minspeed","5000", "below this speed, no acceleration is done"};
+cvar_t m_accelerate_maxspeed = {CVAR_SAVE, "m_accelerate_maxspeed","10000", "above this speed, full acceleration is done"};
+cvar_t m_accelerate_filter = {CVAR_SAVE, "m_accelerate_filter","0.1", "mouse acceleration factor filtering"};
-cvar_t cl_netinputpacketsperserverpacket = {CVAR_SAVE, "cl_netinputpacketsperserverpacket", "1.0", "send this many input packets per server packet received"};
-cvar_t cl_netinputpacketspersecond = {CVAR_SAVE, "cl_netinputpacketspersecond","20", "how many input packets to send to server each second (only used on old servers, and note this is multiplied by cl_netinputpacketsperserverpacket)"};
-cvar_t cl_netinputpacketspersecond_qw = {CVAR_SAVE, "cl_netinputpacketspersecond_qw","72", "how many input packets to send to a qw server each second (only used on qw servers)"};
-cvar_t cl_netinputpacketlosstolerance = {CVAR_SAVE, "cl_netinputpacketlosstolerance", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
+cvar_t cl_netfps = {CVAR_SAVE, "cl_netfps","72", "how many input packets to send to server each second"};
+cvar_t cl_netrepeatinput = {CVAR_SAVE, "cl_netrepeatinput", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
+cvar_t cl_netimmediatebuttons = {CVAR_SAVE, "cl_netimmediatebuttons", "1", "sends extra packets whenever your buttons change or an impulse is used (basically: whenever you click fire or change weapon)"};
cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
+cvar_t cl_csqc_generatemousemoveevents = {0, "cl_csqc_generatemousemoveevents", "1", "enables calls to CSQC_InputEvent with type 2, for compliance with EXT_CSQC spec"};
+
extern cvar_t v_flipped;
/*
cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
- cl.viewangles[ROLL] = ANGLEMOD(cl.viewangles[ROLL]);
if (cl.viewangles[YAW] >= 180)
cl.viewangles[YAW] -= 360;
if (cl.viewangles[PITCH] >= 180)
cl.viewangles[PITCH] -= 360;
- if (cl.viewangles[ROLL] >= 180)
- cl.viewangles[ROLL] -= 360;
-
- cl.viewangles[PITCH] = bound (in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
- cl.viewangles[ROLL] = bound(-50, cl.viewangles[ROLL], 50);
+ cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
+ cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
}
int cl_ignoremousemoves = 2;
Send the intended movement message to the server
================
*/
+extern qboolean CL_VM_InputEvent (int eventtype, int x, int y);
void CL_Input (void)
{
float mx, my;
cl.cmd.upmove *= cl_movespeedkey.value;
}
- in_mouse_x = 0;
- in_mouse_y = 0;
-
// allow mice or other external controllers to add to the move
IN_Move ();
- // ignore a mouse move if mouse was activated/deactivated this frame
- if (cl_ignoremousemoves)
+ // send mouse move to csqc
+ if (cl.csqc_loaded && cl_csqc_generatemousemoveevents.integer)
{
- cl_ignoremousemoves--;
- in_mouse_x = 0;
- in_mouse_y = 0;
+ if (cl.csqc_wantsmousemove)
+ {
+ // event type 3 is a DP_CSQC thing
+ static int oldwindowmouse[2];
+ if (oldwindowmouse[0] != in_windowmouse_x || oldwindowmouse[1] != in_windowmouse_y)
+ {
+ CL_VM_InputEvent(3, in_windowmouse_x * vid_conwidth.integer / vid.width, in_windowmouse_y * vid_conheight.integer / vid.height);
+ oldwindowmouse[0] = in_windowmouse_x;
+ oldwindowmouse[1] = in_windowmouse_y;
+ }
+ }
+ else
+ {
+ if (in_mouse_x || in_mouse_y)
+ CL_VM_InputEvent(2, in_mouse_x * vid_conwidth.integer / vid.width, in_mouse_y * vid_conheight.integer / vid.height);
+ }
+ }
+
+ // apply m_accelerate if it is on
+ if(m_accelerate.value > 1)
+ {
+ static float averagespeed = 0;
+ float speed, f, mi, ma;
+
+ speed = sqrt(in_mouse_x * in_mouse_x + in_mouse_y * in_mouse_y) / cl.realframetime;
+ if(m_accelerate_filter.value > 0)
+ f = bound(0, cl.realframetime / m_accelerate_filter.value, 1);
+ else
+ f = 1;
+ averagespeed = speed * f + averagespeed * (1 - f);
+
+ mi = max(1, m_accelerate_minspeed.value);
+ ma = max(m_accelerate_minspeed.value + 1, m_accelerate_maxspeed.value);
+
+ if(averagespeed <= mi)
+ {
+ f = 1;
+ }
+ else if(averagespeed >= ma)
+ {
+ f = m_accelerate.value;
+ }
+ else
+ {
+ f = averagespeed;
+ f = (f - mi) / (ma - mi) * (m_accelerate.value - 1) + 1;
+ }
+
+ in_mouse_x *= f;
+ in_mouse_y *= f;
}
// apply m_filter if it is on
old_mouse_x = mx;
old_mouse_y = my;
+ // ignore a mouse move if mouse was activated/deactivated this frame
+ if (cl_ignoremousemoves)
+ {
+ cl_ignoremousemoves--;
+ in_mouse_x = old_mouse_x = 0;
+ in_mouse_y = old_mouse_y = 0;
+ }
+
// if not in menu, apply mouse move to viewangles/movement
- if (!cl.csqc_wantsmousemove && in_client_mouse)
+ if (!key_consoleactive && key_dest == key_game && !cl.csqc_wantsmousemove && cl_prydoncursor.integer <= 0)
{
float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
- if (cl_prydoncursor.integer)
- {
- // mouse interacting with the scene, mostly stationary view
- V_StopPitchDrift();
- cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
- cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
- }
- else if (in_strafe.state & 1)
+ if (in_strafe.state & 1)
{
// strafing mode, all looking is movement
V_StopPitchDrift();
cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
}
}
+ else // don't pitch drift when csqc is controlling the mouse
+ {
+ // mouse interacting with the scene, mostly stationary view
+ V_StopPitchDrift();
+ // update prydon cursor
+ cl.cmd.cursor_screen[0] = in_windowmouse_x * 2.0 / vid.width - 1.0;
+ cl.cmd.cursor_screen[1] = in_windowmouse_y * 2.0 / vid.height - 1.0;
+ }
if(v_flipped.integer)
{
// clamp after the move to prevent rendering with bad angles
CL_AdjustAngles ();
+
+ if(cl_movecliptokeyboard.integer)
+ {
+ vec_t f = 1;
+ if (in_speed.state & 1)
+ f *= cl_movespeedkey.value;
+ if(cl_movecliptokeyboard.integer == 2)
+ {
+ // digital direction, analog amount
+ vec_t wishvel_x, wishvel_y;
+ f *= max(cl_sidespeed.value, max(cl_forwardspeed.value, cl_backspeed.value));
+ wishvel_x = fabs(cl.cmd.forwardmove);
+ wishvel_y = fabs(cl.cmd.sidemove);
+ if(wishvel_x != 0 && wishvel_y != 0 && wishvel_x != wishvel_y)
+ {
+ vec_t wishspeed = sqrt(wishvel_x * wishvel_x + wishvel_y * wishvel_y);
+ if(wishvel_x >= 2 * wishvel_y)
+ {
+ // pure X motion
+ if(cl.cmd.forwardmove > 0)
+ cl.cmd.forwardmove = wishspeed;
+ else
+ cl.cmd.forwardmove = -wishspeed;
+ cl.cmd.sidemove = 0;
+ }
+ else if(wishvel_y >= 2 * wishvel_x)
+ {
+ // pure Y motion
+ cl.cmd.forwardmove = 0;
+ if(cl.cmd.sidemove > 0)
+ cl.cmd.sidemove = wishspeed;
+ else
+ cl.cmd.sidemove = -wishspeed;
+ }
+ else
+ {
+ // diagonal
+ if(cl.cmd.forwardmove > 0)
+ cl.cmd.forwardmove = 0.70710678118654752440 * wishspeed;
+ else
+ cl.cmd.forwardmove = -0.70710678118654752440 * wishspeed;
+ if(cl.cmd.sidemove > 0)
+ cl.cmd.sidemove = 0.70710678118654752440 * wishspeed;
+ else
+ cl.cmd.sidemove = -0.70710678118654752440 * wishspeed;
+ }
+ }
+ }
+ else if(cl_movecliptokeyboard.integer)
+ {
+ // digital direction, digital amount
+ if(cl.cmd.sidemove >= cl_sidespeed.value * f * 0.5)
+ cl.cmd.sidemove = cl_sidespeed.value * f;
+ else if(cl.cmd.sidemove <= -cl_sidespeed.value * f * 0.5)
+ cl.cmd.sidemove = -cl_sidespeed.value * f;
+ else
+ cl.cmd.sidemove = 0;
+ if(cl.cmd.forwardmove >= cl_forwardspeed.value * f * 0.5)
+ cl.cmd.forwardmove = cl_forwardspeed.value * f;
+ else if(cl.cmd.forwardmove <= -cl_backspeed.value * f * 0.5)
+ cl.cmd.forwardmove = -cl_backspeed.value * f;
+ else
+ cl.cmd.forwardmove = 0;
+ }
+ }
}
#include "cl_collision.h"
{
vec3_t temp;
- if (!cl_prydoncursor.integer)
+ if (cl_prydoncursor.integer <= 0)
VectorClear(cl.cmd.cursor_screen);
/*
VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
// trace from view origin to the cursor
- cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
-}
-
-void CL_ClientMovement_ExpireOldMoves(void)
-{
- int i;
- int n;
- // remove stale queue items
- n = cl.movement_numqueue;
- cl.movement_numqueue = 0;
- if (cls.servermovesequence)
+ if (cl_prydoncursor_notrace.integer)
{
- for (i = 0;i < n;i++)
- {
- if (cl.movement_queue[i].sequence > cls.servermovesequence)
- cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
- else
- cl.movement_replay_canjump = cl.movement_queue[i].canjump;
- }
+ cl.cmd.cursor_fraction = 1.0f;
+ VectorCopy(cl.cmd.cursor_end, cl.cmd.cursor_impact);
+ VectorClear(cl.cmd.cursor_normal);
+ cl.cmd.cursor_entitynumber = 0;
}
-}
-
-void CL_ClientMovement_Input(qboolean buttonjump, qboolean buttoncrouch)
-{
- // if time has not advanced, do nothing
- if (cl.movecmd[0].msec <= 0)
- return;
- // add to input queue if there is room
- if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])))
- {
- // add to input queue
- cl.movement_queue[cl.movement_numqueue].sequence = cl.movecmd[0].sequence;
- cl.movement_queue[cl.movement_numqueue].time = cl.movecmd[0].time;
- cl.movement_queue[cl.movement_numqueue].frametime = cl.movecmd[0].msec * 0.001;
- VectorCopy(cl.movecmd[0].viewangles, cl.movement_queue[cl.movement_numqueue].viewangles);
- cl.movement_queue[cl.movement_numqueue].move[0] = cl.movecmd[0].forwardmove;
- cl.movement_queue[cl.movement_numqueue].move[1] = cl.movecmd[0].sidemove;
- cl.movement_queue[cl.movement_numqueue].move[2] = cl.movecmd[0].upmove;
- cl.movement_queue[cl.movement_numqueue].jump = buttonjump;
- cl.movement_queue[cl.movement_numqueue].crouch = buttoncrouch;
- cl.movement_numqueue++;
- }
-
- cl.movement_replay = true;
+ else
+ cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
}
typedef enum waterlevel_e
float waterjumptime;
// user command
- client_movementqueue_t q;
+ usercmd_t cmd;
}
cl_clientmovement_state_t;
for (i = 0;i < NUMOFFSETS;i++)
{
VectorAdd(offsets[i], s->origin, neworigin);
- if (!CL_Move(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
+ if (!CL_TraceBox(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
{
VectorCopy(neworigin, s->origin);
return true;
CL_ClientMovement_Unstick(s);
// set crouched
- if (s->q.crouch)
+ if (s->cmd.crouch)
{
// wants to crouch, this always works..
if (!s->crouched)
// low ceiling first
if (s->crouched)
{
- trace = CL_Move(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
+ trace = CL_TraceBox(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
if (!trace.startsolid)
s->crouched = false;
}
// set onground
VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
- VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 2);
- trace = CL_Move(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
+ VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 1); // -2 causes clientside doublejump bug at above 150fps, raising that to 300fps :)
+ trace = CL_TraceBox(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
// set watertype/waterlevel
VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
s->waterlevel = WATERLEVEL_NONE;
- s->watertype = CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
+ s->watertype = CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
if (s->watertype)
{
s->waterlevel = WATERLEVEL_WETFEET;
origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
- if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
+ if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
{
s->waterlevel = WATERLEVEL_SWIMMING;
origin1[2] = s->origin[2] + 22;
- if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
+ if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
s->waterlevel = WATERLEVEL_SUBMERGED;
}
}
trace_t trace3;
CL_ClientMovement_UpdateStatus(s);
VectorCopy(s->velocity, primalvelocity);
- for (bump = 0, t = s->q.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
+ for (bump = 0, t = s->cmd.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
{
VectorMA(s->origin, t, s->velocity, neworigin);
- trace = CL_Move(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
+ trace = CL_TraceBox(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
if (trace.fraction < 1 && trace.plane.normal[2] == 0)
{
// may be a step or wall, try stepping up
// first move forward at a higher level
VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
- trace2 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
+ trace2 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
if (!trace2.startsolid)
{
// then move down from there
VectorCopy(trace2.endpos, currentorigin2);
VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
- trace3 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
+ trace3 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
//Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
// accept the new trace if it made some progress
if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
// water jump only in certain situations
// this mimics quakeworld code
- if (s->q.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
+ if (s->cmd.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
{
vec3_t forward;
vec3_t yawangles;
vec3_t spot;
- VectorSet(yawangles, 0, s->q.viewangles[1], 0);
+ VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
AngleVectors(yawangles, forward, NULL, NULL);
VectorMA(s->origin, 24, forward, spot);
spot[2] += 8;
- if (CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
+ if (CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
{
spot[2] += 24;
- if (!CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
+ if (!CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
{
VectorScale(forward, 50, s->velocity);
s->velocity[2] = 310;
s->waterjumptime = 2;
s->onground = false;
- s->q.canjump = false;
+ s->cmd.canjump = false;
}
}
}
- if (!VectorLength2(s->q.move))
+ if (!(s->cmd.forwardmove*s->cmd.forwardmove + s->cmd.sidemove*s->cmd.sidemove + s->cmd.upmove*s->cmd.upmove))
{
// drift towards bottom
VectorSet(wishvel, 0, 0, -60);
vec3_t right;
vec3_t up;
// calculate movement vector
- AngleVectors(s->q.viewangles, forward, right, up);
+ AngleVectors(s->cmd.viewangles, forward, right, up);
VectorSet(up, 0, 0, 1);
- VectorMAMAM(s->q.move[0], forward, s->q.move[1], right, s->q.move[2], up, wishvel);
+ VectorMAMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, s->cmd.upmove, up, wishvel);
}
// split wishvel into wishspeed and wishdir
if (s->waterjumptime <= 0)
{
// water friction
- f = 1 - s->q.frametime * cl.movevars_waterfriction * s->waterlevel;
+ f = 1 - s->cmd.frametime * cl.movevars_waterfriction * (cls.protocol == PROTOCOL_QUAKEWORLD ? s->waterlevel : 1);
f = bound(0, f, 1);
VectorScale(s->velocity, f, s->velocity);
f = wishspeed - DotProduct(s->velocity, wishdir);
if (f > 0)
{
- f = min(cl.movevars_wateraccelerate * s->q.frametime * wishspeed, f);
+ f = min(cl.movevars_wateraccelerate * s->cmd.frametime * wishspeed, f);
VectorMA(s->velocity, f, wishdir, s->velocity);
}
// holding jump button swims upward slowly
- if (s->q.jump)
+ if (s->cmd.jump)
{
if (s->watertype & SUPERCONTENTS_LAVA)
s->velocity[2] = 50;
s->velocity[2] = 80;
else
{
- if (gamemode == GAME_NEXUIZ)
+ if (gamemode == GAME_NEXUIZ || gamemode == GAME_XONOTIC)
s->velocity[2] = 200;
else
s->velocity[2] = 100;
CL_ClientMovement_Move(s);
}
+static vec_t CL_IsMoveInDirection(vec_t forward, vec_t side, vec_t angle)
+{
+ if(forward == 0 && side == 0)
+ return 0; // avoid division by zero
+ angle -= RAD2DEG(atan2(side, forward));
+ angle = (ANGLEMOD(angle + 180) - 180) / 45;
+ if(angle > 1)
+ return 0;
+ if(angle < -1)
+ return 0;
+ return 1 - fabs(angle);
+}
+
+static vec_t CL_GeomLerp(vec_t a, vec_t lerp, vec_t b)
+{
+ if(a == 0)
+ {
+ if(lerp < 1)
+ return 0;
+ else
+ return b;
+ }
+ if(b == 0)
+ {
+ if(lerp > 0)
+ return 0;
+ else
+ return a;
+ }
+ return a * pow(fabs(b / a), lerp);
+}
+
+void CL_ClientMovement_Physics_CPM_PM_Aircontrol(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
+{
+ vec_t zspeed, speed, dot, k;
+
+#if 0
+ // this doesn't play well with analog input
+ if(s->cmd.forwardmove == 0 || s->cmd.sidemove != 0)
+ return;
+ k = 32;
+#else
+ k = 32 * (2 * CL_IsMoveInDirection(s->cmd.forwardmove, s->cmd.sidemove, 0) - 1);
+ if(k <= 0)
+ return;
+#endif
+
+ k *= bound(0, wishspeed / cl.movevars_maxairspeed, 1);
+
+ zspeed = s->velocity[2];
+ s->velocity[2] = 0;
+ speed = VectorNormalizeLength(s->velocity);
+
+ dot = DotProduct(s->velocity, wishdir);
+
+ if(dot > 0) { // we can't change direction while slowing down
+ k *= pow(dot, cl.movevars_aircontrol_power)*s->cmd.frametime;
+ speed = max(0, speed - cl.movevars_aircontrol_penalty * sqrt(max(0, 1 - dot*dot)) * k/32);
+ k *= cl.movevars_aircontrol;
+ VectorMAM(speed, s->velocity, k, wishdir, s->velocity);
+ VectorNormalize(s->velocity);
+ }
+
+ VectorScale(s->velocity, speed, s->velocity);
+ s->velocity[2] = zspeed;
+}
+
+float CL_ClientMovement_Physics_AdjustAirAccelQW(float accelqw, float factor)
+{
+ return
+ (accelqw < 0 ? -1 : +1)
+ *
+ bound(0.000001, 1 - (1 - fabs(accelqw)) * factor, 1);
+}
+
+void CL_ClientMovement_Physics_PM_Accelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed, vec_t wishspeed0, vec_t accel, vec_t accelqw, vec_t stretchfactor, vec_t sidefric, vec_t speedlimit)
+{
+ vec_t vel_straight;
+ vec_t vel_z;
+ vec3_t vel_perpend;
+ vec_t step;
+ vec3_t vel_xy;
+ vec_t vel_xy_current;
+ vec_t vel_xy_backward, vel_xy_forward;
+ vec_t speedclamp;
+
+ if(stretchfactor > 0)
+ speedclamp = stretchfactor;
+ else if(accelqw < 0)
+ speedclamp = 1;
+ else
+ speedclamp = -1; // no clamping
+
+ if(accelqw < 0)
+ accelqw = -accelqw;
+
+ if(cl.moveflags & MOVEFLAG_Q2AIRACCELERATE)
+ wishspeed0 = wishspeed; // don't need to emulate this Q1 bug
+
+ vel_straight = DotProduct(s->velocity, wishdir);
+ vel_z = s->velocity[2];
+ VectorCopy(s->velocity, vel_xy); vel_xy[2] -= vel_z;
+ VectorMA(vel_xy, -vel_straight, wishdir, vel_perpend);
+
+ step = accel * s->cmd.frametime * wishspeed0;
+
+ vel_xy_current = VectorLength(vel_xy);
+ if(speedlimit > 0)
+ accelqw = CL_ClientMovement_Physics_AdjustAirAccelQW(accelqw, (speedlimit - bound(wishspeed, vel_xy_current, speedlimit)) / max(1, speedlimit - wishspeed));
+ vel_xy_forward = vel_xy_current + bound(0, wishspeed - vel_xy_current, step) * accelqw + step * (1 - accelqw);
+ vel_xy_backward = vel_xy_current - bound(0, wishspeed + vel_xy_current, step) * accelqw - step * (1 - accelqw);
+ if(vel_xy_backward < 0)
+ vel_xy_backward = 0; // not that it REALLY occurs that this would cause wrong behaviour afterwards
+
+ vel_straight = vel_straight + bound(0, wishspeed - vel_straight, step) * accelqw + step * (1 - accelqw);
+
+ if(sidefric < 0 && VectorLength2(vel_perpend))
+ // negative: only apply so much sideways friction to stay below the speed you could get by "braking"
+ {
+ vec_t f, fmin;
+ f = max(0, 1 + s->cmd.frametime * wishspeed * sidefric);
+ fmin = (vel_xy_backward*vel_xy_backward - vel_straight*vel_straight) / VectorLength2(vel_perpend);
+ // assume: fmin > 1
+ // vel_xy_backward*vel_xy_backward - vel_straight*vel_straight > vel_perpend*vel_perpend
+ // vel_xy_backward*vel_xy_backward > vel_straight*vel_straight + vel_perpend*vel_perpend
+ // vel_xy_backward*vel_xy_backward > vel_xy * vel_xy
+ // obviously, this cannot be
+ if(fmin <= 0)
+ VectorScale(vel_perpend, f, vel_perpend);
+ else
+ {
+ fmin = sqrt(fmin);
+ VectorScale(vel_perpend, max(fmin, f), vel_perpend);
+ }
+ }
+ else
+ VectorScale(vel_perpend, max(0, 1 - s->cmd.frametime * wishspeed * sidefric), vel_perpend);
+
+ VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
+
+ if(speedclamp >= 0)
+ {
+ vec_t vel_xy_preclamp;
+ vel_xy_preclamp = VectorLength(s->velocity);
+ if(vel_xy_preclamp > 0) // prevent division by zero
+ {
+ vel_xy_current += (vel_xy_forward - vel_xy_current) * speedclamp;
+ if(vel_xy_current < vel_xy_preclamp)
+ VectorScale(s->velocity, (vel_xy_current / vel_xy_preclamp), s->velocity);
+ }
+ }
+
+ s->velocity[2] += vel_z;
+}
+
+void CL_ClientMovement_Physics_PM_AirAccelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
+{
+ vec3_t curvel, wishvel, acceldir, curdir;
+ float addspeed, accelspeed, curspeed;
+ float dot;
+
+ float airforwardaccel = cl.movevars_warsowbunny_airforwardaccel;
+ float bunnyaccel = cl.movevars_warsowbunny_accel;
+ float bunnytopspeed = cl.movevars_warsowbunny_topspeed;
+ float turnaccel = cl.movevars_warsowbunny_turnaccel;
+ float backtosideratio = cl.movevars_warsowbunny_backtosideratio;
+
+ if( !wishspeed )
+ return;
+
+ VectorCopy( s->velocity, curvel );
+ curvel[2] = 0;
+ curspeed = VectorLength( curvel );
+
+ if( wishspeed > curspeed * 1.01f )
+ {
+ float accelspeed = curspeed + airforwardaccel * cl.movevars_maxairspeed * s->cmd.frametime;
+ if( accelspeed < wishspeed )
+ wishspeed = accelspeed;
+ }
+ else
+ {
+ float f = ( bunnytopspeed - curspeed ) / ( bunnytopspeed - cl.movevars_maxairspeed );
+ if( f < 0 )
+ f = 0;
+ wishspeed = max( curspeed, cl.movevars_maxairspeed ) + bunnyaccel * f * cl.movevars_maxairspeed * s->cmd.frametime;
+ }
+ VectorScale( wishdir, wishspeed, wishvel );
+ VectorSubtract( wishvel, curvel, acceldir );
+ addspeed = VectorNormalizeLength( acceldir );
+
+ accelspeed = turnaccel * cl.movevars_maxairspeed /* wishspeed */ * s->cmd.frametime;
+ if( accelspeed > addspeed )
+ accelspeed = addspeed;
+
+ if( backtosideratio < 1.0f )
+ {
+ VectorNormalize2( curvel, curdir );
+ dot = DotProduct( acceldir, curdir );
+ if( dot < 0 )
+ VectorMA( acceldir, -( 1.0f - backtosideratio ) * dot, curdir, acceldir );
+ }
+
+ VectorMA( s->velocity, accelspeed, acceldir, s->velocity );
+}
+
void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
{
vec_t friction;
vec_t addspeed;
vec_t accelspeed;
vec_t f;
+ vec_t gravity;
vec3_t forward;
vec3_t right;
vec3_t up;
// jump if on ground with jump button pressed but only if it has been
// released at least once since the last jump
- if (s->q.jump)
+ if (s->cmd.jump)
{
- if (s->onground && (s->q.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
+ if (s->onground && (s->cmd.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
{
s->velocity[2] += cl.movevars_jumpvelocity;
s->onground = false;
- s->q.canjump = false;
+ s->cmd.canjump = false;
}
}
else
- s->q.canjump = true;
+ s->cmd.canjump = true;
// calculate movement vector
- VectorSet(yawangles, 0, s->q.viewangles[1], 0);
+ VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
AngleVectors(yawangles, forward, right, up);
- VectorMAM(s->q.move[0], forward, s->q.move[1], right, wishvel);
+ VectorMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, wishvel);
// split wishvel into wishspeed and wishdir
wishspeed = VectorLength(wishvel);
VectorScale(wishvel, 1 / wishspeed, wishdir);
else
VectorSet( wishdir, 0.0, 0.0, 0.0 );
- wishspeed = min(wishspeed, cl.movevars_maxspeed);
- if (s->crouched)
- wishspeed *= 0.5;
-
// check if onground
if (s->onground)
{
+ wishspeed = min(wishspeed, cl.movevars_maxspeed);
+ if (s->crouched)
+ wishspeed *= 0.5;
+
// apply edge friction
f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
- friction = cl.movevars_friction;
- if (f > 0 && cl.movevars_edgefriction != 1)
+ if (f > 0)
{
- vec3_t neworigin2;
- vec3_t neworigin3;
- // note: QW uses the full player box for the trace, and yet still
- // uses s->origin[2] + s->mins[2], which is clearly an bug, but
- // this mimics it for compatibility
- VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
- VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
- if (cls.protocol == PROTOCOL_QUAKEWORLD)
- trace = CL_Move(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
- else
- trace = CL_Move(neworigin2, vec3_origin, vec3_origin, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
- if (trace.fraction == 1 && !trace.startsolid)
- friction *= cl.movevars_edgefriction;
+ friction = cl.movevars_friction;
+ if (cl.movevars_edgefriction != 1)
+ {
+ vec3_t neworigin2;
+ vec3_t neworigin3;
+ // note: QW uses the full player box for the trace, and yet still
+ // uses s->origin[2] + s->mins[2], which is clearly an bug, but
+ // this mimics it for compatibility
+ VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
+ VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
+ if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ trace = CL_TraceBox(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
+ else
+ trace = CL_TraceLine(neworigin2, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false, false);
+ if (trace.fraction == 1 && !trace.startsolid)
+ friction *= cl.movevars_edgefriction;
+ }
+ // apply ground friction
+ f = 1 - s->cmd.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
+ f = max(f, 0);
+ VectorScale(s->velocity, f, s->velocity);
}
- // apply ground friction
- f = 1 - s->q.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
- f = max(f, 0);
- VectorScale(s->velocity, f, s->velocity);
addspeed = wishspeed - DotProduct(s->velocity, wishdir);
if (addspeed > 0)
{
- accelspeed = min(cl.movevars_accelerate * s->q.frametime * wishspeed, addspeed);
+ accelspeed = min(cl.movevars_accelerate * s->cmd.frametime * wishspeed, addspeed);
VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
}
- s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->q.frametime;
+ if(cl.moveflags & MOVEFLAG_NOGRAVITYONGROUND)
+ gravity = 0;
+ else
+ gravity = cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
+ if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
+ s->velocity[2] -= gravity * 0.5f;
+ else
+ s->velocity[2] -= gravity;
if (cls.protocol == PROTOCOL_QUAKEWORLD)
s->velocity[2] = 0;
if (VectorLength2(s->velocity))
CL_ClientMovement_Move(s);
+ if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
+ s->velocity[2] -= gravity * 0.5f;
}
else
{
if (s->waterjumptime <= 0)
{
- vec_t f;
- vec_t vel_straight;
- vec_t vel_z;
- vec3_t vel_perpend;
-
// apply air speed limit
+ vec_t accel, wishspeed0, wishspeed2, accelqw, strafity;
+ qboolean accelerating;
+
+ accelqw = cl.movevars_airaccel_qw;
+ wishspeed0 = wishspeed;
wishspeed = min(wishspeed, cl.movevars_maxairspeed);
+ if (s->crouched)
+ wishspeed *= 0.5;
+ accel = cl.movevars_airaccelerate;
- /*
- addspeed = wishspeed - DotProduct(s->velocity, wishdir);
- if (addspeed > 0)
+ accelerating = (DotProduct(s->velocity, wishdir) > 0);
+ wishspeed2 = wishspeed;
+
+ // CPM: air control
+ if(cl.movevars_airstopaccelerate != 0)
{
- accelspeed = min(cl.movevars_accelerate * s->q.frametime * wishspeed, addspeed);
- VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
+ vec3_t curdir;
+ curdir[0] = s->velocity[0];
+ curdir[1] = s->velocity[1];
+ curdir[2] = 0;
+ VectorNormalize(curdir);
+ accel = accel + (cl.movevars_airstopaccelerate - accel) * max(0, -DotProduct(curdir, wishdir));
}
- */
-
- vel_straight = DotProduct(s->velocity, wishdir);
- vel_z = s->velocity[2];
- VectorMA(s->velocity, -vel_straight, wishdir, vel_perpend);
- vel_perpend[2] -= vel_z;
-
- f = wishspeed - vel_straight;
- if(f > 0)
- vel_straight += min(f, cl.movevars_airaccelerate * s->q.frametime * wishspeed) * cl.movevars_airaccel_qw;
- if(wishspeed > 0)
- vel_straight += min(wishspeed, cl.movevars_airaccelerate * s->q.frametime * wishspeed) * (1 - cl.movevars_airaccel_qw);
-
- VectorM(1 - (s->q.frametime * (wishspeed / cl.movevars_maxairspeed) * cl.movevars_airaccel_sideways_friction), vel_perpend, vel_perpend);
+ strafity = CL_IsMoveInDirection(s->cmd.forwardmove, s->cmd.sidemove, -90) + CL_IsMoveInDirection(s->cmd.forwardmove, s->cmd.sidemove, +90); // if one is nonzero, other is always zero
+ if(cl.movevars_maxairstrafespeed)
+ wishspeed = min(wishspeed, CL_GeomLerp(cl.movevars_maxairspeed, strafity, cl.movevars_maxairstrafespeed));
+ if(cl.movevars_airstrafeaccelerate)
+ accel = CL_GeomLerp(cl.movevars_airaccelerate, strafity, cl.movevars_airstrafeaccelerate);
+ if(cl.movevars_airstrafeaccel_qw)
+ accelqw =
+ (((strafity > 0.5 ? cl.movevars_airstrafeaccel_qw : cl.movevars_airaccel_qw) >= 0) ? +1 : -1)
+ *
+ (1 - CL_GeomLerp(1 - fabs(cl.movevars_airaccel_qw), strafity, 1 - fabs(cl.movevars_airstrafeaccel_qw)));
+ // !CPM
+
+ if(cl.movevars_warsowbunny_turnaccel && accelerating && s->cmd.sidemove == 0 && s->cmd.forwardmove != 0)
+ CL_ClientMovement_Physics_PM_AirAccelerate(s, wishdir, wishspeed2);
+ else
+ CL_ClientMovement_Physics_PM_Accelerate(s, wishdir, wishspeed, wishspeed0, accel, accelqw, cl.movevars_airaccel_qw_stretchfactor, cl.movevars_airaccel_sideways_friction / cl.movevars_maxairspeed, cl.movevars_airspeedlimit_nonqw);
- VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
- s->velocity[2] += vel_z;
+ if(cl.movevars_aircontrol)
+ CL_ClientMovement_Physics_CPM_PM_Aircontrol(s, wishdir, wishspeed2);
}
- s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->q.frametime;
+ gravity = cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
+ if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
+ s->velocity[2] -= gravity * 0.5f;
+ else
+ s->velocity[2] -= gravity;
CL_ClientMovement_Move(s);
+ if(cl.moveflags & MOVEFLAG_GRAVITYUNAFFECTEDBYTICRATE)
+ s->velocity[2] -= gravity * 0.5f;
}
}
void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
{
//Con_Printf(" %f", frametime);
- if (!s->q.jump)
- s->q.canjump = true;
- s->waterjumptime -= s->q.frametime;
+ if (!s->cmd.jump)
+ s->cmd.canjump = true;
+ s->waterjumptime -= s->cmd.frametime;
CL_ClientMovement_UpdateStatus(s);
if (s->waterlevel >= WATERLEVEL_SWIMMING)
CL_ClientMovement_Physics_Swim(s);
void CL_UpdateMoveVars(void)
{
if (cls.protocol == PROTOCOL_QUAKEWORLD)
- cl.movevars_ticrate = 1.0 / bound(1, cl_netinputpacketspersecond_qw.value, 100);
+ {
+ cl.moveflags = 0;
+ }
else if (cl.stats[STAT_MOVEVARS_TICRATE])
{
+ cl.moveflags = cl.stats[STAT_MOVEFLAGS];
cl.movevars_ticrate = cl.statsf[STAT_MOVEVARS_TICRATE];
cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
+ cl.movevars_airaccel_qw_stretchfactor = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW_STRETCHFACTOR];
cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
+ cl.movevars_airstopaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTOPACCELERATE];
+ cl.movevars_airstrafeaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCELERATE];
+ cl.movevars_maxairstrafespeed = cl.statsf[STAT_MOVEVARS_MAXAIRSTRAFESPEED];
+ cl.movevars_airstrafeaccel_qw = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCEL_QW];
+ cl.movevars_aircontrol = cl.statsf[STAT_MOVEVARS_AIRCONTROL];
+ cl.movevars_aircontrol_power = cl.statsf[STAT_MOVEVARS_AIRCONTROL_POWER];
+ cl.movevars_aircontrol_penalty = cl.statsf[STAT_MOVEVARS_AIRCONTROL_PENALTY];
+ cl.movevars_warsowbunny_airforwardaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_AIRFORWARDACCEL];
+ cl.movevars_warsowbunny_accel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_ACCEL];
+ cl.movevars_warsowbunny_topspeed = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TOPSPEED];
+ cl.movevars_warsowbunny_turnaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TURNACCEL];
+ cl.movevars_warsowbunny_backtosideratio = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_BACKTOSIDERATIO];
+ cl.movevars_airspeedlimit_nonqw = cl.statsf[STAT_MOVEVARS_AIRSPEEDLIMIT_NONQW];
}
else
{
- cl.movevars_ticrate = 1.0 / bound(1, cl_netinputpacketspersecond.value, 100);
+ cl.moveflags = 0;
+ cl.movevars_ticrate = slowmo.value / bound(1.0f, cl_netfps.value, 1000.0f);
cl.movevars_timescale = slowmo.value;
cl.movevars_gravity = sv_gravity.value;
cl.movevars_stopspeed = cl_movement_stopspeed.value;
cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
cl.movevars_stepheight = cl_movement_stepheight.value;
cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
+ cl.movevars_airaccel_qw_stretchfactor = 0;
cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
+ cl.movevars_airstopaccelerate = 0;
+ cl.movevars_airstrafeaccelerate = 0;
+ cl.movevars_maxairstrafespeed = 0;
+ cl.movevars_airstrafeaccel_qw = 0;
+ cl.movevars_aircontrol = 0;
+ cl.movevars_aircontrol_power = 2;
+ cl.movevars_aircontrol_penalty = 0;
+ cl.movevars_warsowbunny_airforwardaccel = 0;
+ cl.movevars_warsowbunny_accel = 0;
+ cl.movevars_warsowbunny_topspeed = 0;
+ cl.movevars_warsowbunny_turnaccel = 0;
+ cl.movevars_warsowbunny_backtosideratio = 0;
+ cl.movevars_airspeedlimit_nonqw = 0;
+ }
+
+ if(!(cl.moveflags & MOVEFLAG_VALID))
+ {
+ if(gamemode == GAME_NEXUIZ)
+ cl.moveflags = MOVEFLAG_Q2AIRACCELERATE;
}
+
+ if(cl.movevars_aircontrol_power <= 0)
+ cl.movevars_aircontrol_power = 2; // CPMA default
}
void CL_ClientMovement_Replay(void)
{
int i;
- qboolean canjump;
- double totalmovetime;
+ double totalmovemsec;
cl_clientmovement_state_t s;
- CL_ClientMovement_ExpireOldMoves();
+ if (cl.movement_predicted && !cl.movement_replay)
+ return;
+
+ if (!cl_movement_replay.integer)
+ return;
// set up starting state for the series of moves
memset(&s, 0, sizeof(s));
s.crouched = true; // will be updated on first move
//Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
- totalmovetime = 0;
- for (i = 0;i < cl.movement_numqueue - 1;i++)
- totalmovetime += cl.movement_queue[i].frametime;
- cl.movement_predicted = totalmovetime * 1000.0 >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
- //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovetime * 1000.0, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
+ totalmovemsec = 0;
+ for (i = 0;i < CL_MAX_USERCMDS;i++)
+ if (cl.movecmd[i].sequence > cls.servermovesequence)
+ totalmovemsec += cl.movecmd[i].msec;
+ cl.movement_predicted = totalmovemsec >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
+ //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovemsec, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
if (cl.movement_predicted)
{
//Con_Printf("%ims\n", cl.movecmd[0].msec);
// replay the input queue to predict current location
// note: this relies on the fact there's always one queue item at the end
- canjump = cl.movement_replay_canjump;
- for (i = 0;i < cl.movement_numqueue;i++)
+ // find how many are still valid
+ for (i = 0;i < CL_MAX_USERCMDS;i++)
+ if (cl.movecmd[i].sequence <= cls.servermovesequence)
+ break;
+ // now walk them in oldest to newest order
+ for (i--;i >= 0;i--)
{
- s.q = cl.movement_queue[i];
- s.q.canjump = canjump;
+ s.cmd = cl.movecmd[i];
+ if (i < CL_MAX_USERCMDS - 1)
+ s.cmd.canjump = cl.movecmd[i+1].canjump;
+ // FIXME doesn't this read from unused slots? shouldn't this rather be limited to the initial value of i?
+
// if a move is more than 50ms, do it as two moves (matching qwsv)
- if (s.q.frametime > 0.05)
+ //Con_Printf("%i ", s.cmd.msec);
+ if(s.cmd.frametime > 0.0005)
{
- s.q.frametime *= 0.5;
+ if (s.cmd.frametime > 0.05)
+ {
+ s.cmd.frametime /= 2;
+ CL_ClientMovement_PlayerMove(&s);
+ }
CL_ClientMovement_PlayerMove(&s);
+ cl.movecmd[i].canjump = s.cmd.canjump;
}
- CL_ClientMovement_PlayerMove(&s);
- canjump = cl.movement_queue[i].canjump = s.q.canjump;
}
+ //Con_Printf("\n");
+ CL_ClientMovement_UpdateStatus(&s);
}
else
{
// get the first movement queue entry to know whether to crouch and such
- s.q = cl.movement_queue[0];
+ s.cmd = cl.movecmd[0];
}
- CL_ClientMovement_UpdateStatus(&s);
- if (cl.movement_replay)
+ if (cls.demoplayback) // for bob, speedometer
+ VectorCopy(cl.mvelocity[0], cl.movement_velocity);
+ else
{
cl.movement_replay = false;
- // update interpolation timestamps if time has passed
- if (cl.movement_time[0] != cl.movecmd[0].time)
- {
- cl.movement_time[1] = cl.movement_time[0];
- cl.movement_time[0] = cl.movecmd[0].time;
- cl.movement_time[2] = cl.time;
- VectorCopy(cl.movement_origin, cl.movement_oldorigin);
- //VectorCopy(s.origin, cl.entities[cl.playerentity].state_current.origin);
- //VectorSet(cl.entities[cl.playerentity].state_current.angles, 0, cl.viewangles[1], 0);
- }
-
// update the interpolation target position and velocity
VectorCopy(s.origin, cl.movement_origin);
VectorCopy(s.velocity, cl.movement_velocity);
}
- else if(cls.demoplayback) // for bob, speedometer
- VectorCopy(cl.mvelocity[0], cl.movement_velocity);
// update the onground flag if appropriate
if (cl.movement_predicted)
if (bits & QW_CM_ANGLE3)
MSG_WriteAngle16i(buf, to->viewangles[2]);
if (bits & QW_CM_FORWARD)
- MSG_WriteShort(buf, to->forwardmove);
+ MSG_WriteShort(buf, (short) to->forwardmove);
if (bits & QW_CM_SIDE)
- MSG_WriteShort(buf, to->sidemove);
+ MSG_WriteShort(buf, (short) to->sidemove);
if (bits & QW_CM_UP)
- MSG_WriteShort(buf, to->upmove);
+ MSG_WriteShort(buf, (short) to->upmove);
if (bits & QW_CM_BUTTONS)
MSG_WriteByte(buf, to->buttons);
if (bits & QW_CM_IMPULSE)
MSG_WriteByte(buf, to->msec);
}
+void CL_NewFrameReceived(int num)
+{
+ if (developer_networkentities.integer >= 10)
+ Con_Printf("recv: svc_entities %i\n", num);
+ cl.latestframenums[cl.latestframenumsposition] = num;
+ cl.latestsendnums[cl.latestframenumsposition] = cl.cmd.sequence;
+ cl.latestframenumsposition = (cl.latestframenumsposition + 1) % LATESTFRAMENUMS;
+}
+
+void CL_RotateMoves(const matrix4x4_t *m)
+{
+ // rotate viewangles in all previous moves
+ vec3_t v;
+ vec3_t f, r, u;
+ int i;
+ for (i = 0;i < CL_MAX_USERCMDS;i++)
+ {
+ if (cl.movecmd[i].sequence > cls.servermovesequence)
+ {
+ usercmd_t *c = &cl.movecmd[i];
+ AngleVectors(c->viewangles, f, r, u);
+ Matrix4x4_Transform(m, f, v); VectorCopy(v, f);
+ Matrix4x4_Transform(m, u, v); VectorCopy(v, u);
+ AnglesFromVectors(c->viewangles, f, u, false);
+ }
+ }
+}
+
/*
==============
CL_SendMove
void CL_SendMove(void)
{
int i, j, packetloss;
+ int checksumindex;
int bits;
+ int maxusercmds;
+ usercmd_t *cmd;
sizebuf_t buf;
unsigned char data[1024];
- static double lastsendtime = 0;
double packettime;
int msecdelta;
-
- CL_ClientMovement_ExpireOldMoves();
+ qboolean quemove;
+ qboolean important;
// if playing a demo, do nothing
if (!cls.netcon)
return;
- // don't send too often or else network connections can get clogged by a high renderer framerate
- packettime = cl.movevars_ticrate;
- if (cls.protocol != PROTOCOL_QUAKEWORLD)
- packettime /= (double)bound(1, cl_netinputpacketsperserverpacket.value, 10);
- // send input every frame in singleplayer
- if (cl.islocalgame)
- packettime = 0;
- // quakeworld servers take only frametimes
- // predicted dp7 servers take current interpolation time
- // unpredicted servers take an echo of the latest server timestamp
+ // we don't que moves during a lag spike (potential network timeout)
+ quemove = realtime - cl.last_received_message < cl_movement_nettimeout.value;
+
+ // we build up cl.cmd and then decide whether to send or not
+ // we store this into cl.movecmd[0] for prediction each frame even if we
+ // do not send, to make sure that prediction is instant
cl.cmd.time = cl.time;
- cl.cmd.sequence = cls.movesequence;
- if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
+
+ // set button bits
+ // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
+ bits = 0;
+ if (in_attack.state & 3) bits |= 1;
+ if (in_jump.state & 3) bits |= 2;
+ if (in_button3.state & 3) bits |= 4;
+ if (in_button4.state & 3) bits |= 8;
+ if (in_button5.state & 3) bits |= 16;
+ if (in_button6.state & 3) bits |= 32;
+ if (in_button7.state & 3) bits |= 64;
+ if (in_button8.state & 3) bits |= 128;
+ if (in_use.state & 3) bits |= 256;
+ if (key_dest != key_game || key_consoleactive) bits |= 512;
+ if (cl_prydoncursor.integer > 0) bits |= 1024;
+ if (in_button9.state & 3) bits |= 2048;
+ if (in_button10.state & 3) bits |= 4096;
+ if (in_button11.state & 3) bits |= 8192;
+ if (in_button12.state & 3) bits |= 16384;
+ if (in_button13.state & 3) bits |= 32768;
+ if (in_button14.state & 3) bits |= 65536;
+ if (in_button15.state & 3) bits |= 131072;
+ if (in_button16.state & 3) bits |= 262144;
+ // button bits 19-31 unused currently
+ // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
+ if(cl_prydoncursor.integer > 0)
{
- if (realtime < lastsendtime + packettime)
- return;
- cl.cmd.sequence = cls.netcon->qw.outgoing_sequence;
+ if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
+ if (cl.cmd.cursor_screen[0] >= 1) bits |= 16;
+ if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
+ if (cl.cmd.cursor_screen[1] >= 1) bits |= 64;
}
- else
+
+ // set buttons and impulse
+ cl.cmd.buttons = bits;
+ cl.cmd.impulse = in_impulse;
+
+ // set viewangles
+ VectorCopy(cl.viewangles, cl.cmd.viewangles);
+
+ msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[1].time * 1000));
+ cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
+ // ridiculous value rejection (matches qw)
+ if (cl.cmd.msec > 250)
+ cl.cmd.msec = 100;
+ cl.cmd.frametime = cl.cmd.msec * (1.0 / 1000.0);
+
+ cl.cmd.predicted = cl_movement.integer != 0;
+
+ // movement is set by input code (forwardmove/sidemove/upmove)
+ // always dump the first two moves, because they may contain leftover inputs from the last level
+ if (cl.cmd.sequence <= 2)
+ cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
+
+ cl.cmd.jump = (cl.cmd.buttons & 2) != 0;
+ cl.cmd.crouch = 0;
+ switch (cls.protocol)
{
- // movement should be sent immediately whenever a server
- // packet is received, to minimize ping times
- //
+ case PROTOCOL_QUAKEWORLD:
+ case PROTOCOL_QUAKE:
+ case PROTOCOL_QUAKEDP:
+ case PROTOCOL_NEHAHRAMOVIE:
+ case PROTOCOL_NEHAHRABJP:
+ case PROTOCOL_NEHAHRABJP2:
+ case PROTOCOL_NEHAHRABJP3:
+ case PROTOCOL_DARKPLACES1:
+ case PROTOCOL_DARKPLACES2:
+ case PROTOCOL_DARKPLACES3:
+ case PROTOCOL_DARKPLACES4:
+ case PROTOCOL_DARKPLACES5:
+ break;
+ case PROTOCOL_DARKPLACES6:
+ case PROTOCOL_DARKPLACES7:
+ // FIXME: cl.cmd.buttons & 16 is +button5, Nexuiz/Xonotic specific
+ cl.cmd.crouch = (cl.cmd.buttons & 16) != 0;
+ break;
+ case PROTOCOL_UNKNOWN:
+ break;
+ }
- if(cl_netinputpacketsperserverpacket.value > 1)
- {
- // FIXME: needupdate causes odd behaviour with movement reply as it
- // seems, if cl_netinputpacketsperserverpackets is > 1. Don't know
- // why. No idea if it ever gets fixed, but until it does...
- if (realtime < lastsendtime + packettime)
- return;
- }
- else if(cl_netinputpacketsperserverpacket.value == 1)
- {
- // the way it is meant to be
- if (!cl.movement_needupdate && realtime < lastsendtime + packettime)
- return;
- }
- else
- {
- // only ever send input as replies to server packets or if we REALLY got nothing else (FIXME may be the more sane default)
- if (!cl.movement_needupdate && realtime < lastsendtime + packettime + 0.1)
- return;
- }
+ if (quemove)
+ cl.movecmd[0] = cl.cmd;
+
+ // don't predict more than 200fps
+ if (realtime >= cl.lastpackettime + 0.005)
+ cl.movement_replay = true; // redo the prediction
+
+ // now decide whether to actually send this move
+ // (otherwise it is only for prediction)
+
+ // don't send too often or else network connections can get clogged by a
+ // high renderer framerate
+ packettime = 1.0 / bound(1, cl_netfps.value, 1000);
+ if (cl.movevars_timescale && cl.movevars_ticrate)
+ {
+ float maxtic = cl.movevars_ticrate / cl.movevars_timescale;
+ packettime = min(packettime, maxtic);
}
- // don't let it fall behind if CL_SendMove hasn't been called recently
- // (such is the case when framerate is too low for instance)
- lastsendtime = bound(realtime, lastsendtime + packettime, realtime + packettime);
- // set the flag indicating that we sent a packet recently
- cl.movement_needupdate = false;
+ // do not send 0ms packets because they mess up physics
+ if(cl.cmd.msec == 0 && cl.time > cl.oldtime && (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS))
+ return;
+ // always send if buttons changed or an impulse is pending
+ // even if it violates the rate limit!
+ important = (cl.cmd.impulse || (cl_netimmediatebuttons.integer && cl.cmd.buttons != cl.movecmd[1].buttons));
+ // don't send too often (cl_netfps)
+ if (!important && realtime < cl.lastpackettime + packettime)
+ return;
+ // don't choke the connection with packets (obey rate limit)
+ // it is important that this check be last, because it adds a new
+ // frame to the shownetgraph output and any cancelation after this
+ // will produce a nasty spike-like look to the netgraph
+ // we also still send if it is important
+ if (!NetConn_CanSend(cls.netcon) && !important)
+ return;
+ // try to round off the lastpackettime to a multiple of the packet interval
+ // (this causes it to emit packets at a steady beat)
+ if (packettime > 0)
+ cl.lastpackettime = floor(realtime / packettime) * packettime;
+ else
+ cl.lastpackettime = realtime;
buf.maxsize = sizeof(data);
buf.cursize = 0;
buf.data = data;
- // conditions for sending a move:
- // if the move advances time or if the game is paused (in which case time
- // is not advancing)
- // don't send a new input packet if the connection is still saturated from
- // the last one (or chat messages, etc)
- // note: this behavior comes from QW
- if ((cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS) && !NetConn_CanSend(cls.netcon) && !cl.islocalgame)
- return;
-
- // increase the move counter since we intend to send a move
- cls.movesequence++;
-
// send the movement message
// PROTOCOL_QUAKE clc_move = 16 bytes total
// PROTOCOL_QUAKEDP clc_move = 16 bytes total
// set prydon cursor info
CL_UpdatePrydonCursor();
- // set button bits
- // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
- bits = 0;
- if (in_attack.state & 3) bits |= 1;in_attack.state &= ~2;
- if (in_jump.state & 3) bits |= 2;in_jump.state &= ~2;
- if (in_button3.state & 3) bits |= 4;in_button3.state &= ~2;
- if (in_button4.state & 3) bits |= 8;in_button4.state &= ~2;
- if (in_button5.state & 3) bits |= 16;in_button5.state &= ~2;
- if (in_button6.state & 3) bits |= 32;in_button6.state &= ~2;
- if (in_button7.state & 3) bits |= 64;in_button7.state &= ~2;
- if (in_button8.state & 3) bits |= 128;in_button8.state &= ~2;
- if (in_use.state & 3) bits |= 256;in_use.state &= ~2;
- if (key_dest != key_game || key_consoleactive) bits |= 512;
- if (cl_prydoncursor.integer) bits |= 1024;
- if (in_button9.state & 3) bits |= 2048;in_button9.state &= ~2;
- if (in_button10.state & 3) bits |= 4096;in_button10.state &= ~2;
- if (in_button11.state & 3) bits |= 8192;in_button11.state &= ~2;
- if (in_button12.state & 3) bits |= 16384;in_button12.state &= ~2;
- if (in_button13.state & 3) bits |= 32768;in_button13.state &= ~2;
- if (in_button14.state & 3) bits |= 65536;in_button14.state &= ~2;
- if (in_button15.state & 3) bits |= 131072;in_button15.state &= ~2;
- if (in_button16.state & 3) bits |= 262144;in_button16.state &= ~2;
- // button bits 19-31 unused currently
- // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
- if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
- if (cl.cmd.cursor_screen[0] >= 1) bits |= 16;
- if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
- if (cl.cmd.cursor_screen[1] >= 1) bits |= 64;
- cl.cmd.buttons = bits;
-
- // set impulse
- cl.cmd.impulse = in_impulse;
- in_impulse = 0;
-
- // movement is set by input code (forwardmove/sidemove/upmove)
-
- // set viewangles
- VectorCopy(cl.viewangles, cl.cmd.viewangles);
-
- msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[0].time * 1000));
- cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
- // ridiculous value rejection (matches qw)
- if (cl.cmd.msec > 250)
- cl.cmd.msec = 100;
-
- cl.cmd.predicted = cl_movement.integer;
-
- // always dump the first two messages, because they may contain leftover inputs from the last level
- if (cl.cmd.sequence <= 2)
- cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
-
- // update the cl.movecmd array which holds the most recent moves
- for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
- cl.movecmd[i] = cl.movecmd[i-1];
- cl.movecmd[0] = cl.cmd;
-
- if (cls.protocol == PROTOCOL_QUAKEWORLD)
+ if (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS)
{
- int checksumindex;
-
- CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
-
- MSG_WriteByte(&buf, qw_clc_move);
- // save the position for a checksum byte
- checksumindex = buf.cursize;
- MSG_WriteByte(&buf, 0);
- // packet loss percentage
- for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
- if (cls.netcon->incoming_unreliablesize[j] == NETGRAPH_LOSTPACKET)
- packetloss++;
- packetloss = packetloss * 100 / NETGRAPH_PACKETS;
- MSG_WriteByte(&buf, packetloss);
- // write most recent 3 moves
- QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
- QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
- QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.movecmd[0]);
- // calculate the checksum
- buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->qw.outgoing_sequence);
- // if delta compression history overflows, request no delta
- if (cls.netcon->qw.outgoing_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
- cl.qw_validsequence = 0;
- // request delta compression if appropriate
- if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
+ switch (cls.protocol)
{
- cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
- MSG_WriteByte(&buf, qw_clc_delta);
- MSG_WriteByte(&buf, cl.qw_validsequence & 255);
- }
- else
- cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = -1;
- }
- else if (cls.signon == SIGNONS)
- {
- if (cls.protocol == PROTOCOL_QUAKE || cls.protocol == PROTOCOL_QUAKEDP || cls.protocol == PROTOCOL_NEHAHRAMOVIE || cls.protocol == PROTOCOL_NEHAHRABJP || cls.protocol == PROTOCOL_NEHAHRABJP2 || cls.protocol == PROTOCOL_NEHAHRABJP3)
- {
- CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
-
+ case PROTOCOL_QUAKEWORLD:
+ MSG_WriteByte(&buf, qw_clc_move);
+ // save the position for a checksum byte
+ checksumindex = buf.cursize;
+ MSG_WriteByte(&buf, 0);
+ // packet loss percentage
+ for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
+ if (cls.netcon->incoming_netgraph[j].unreliablebytes == NETGRAPH_LOSTPACKET)
+ packetloss++;
+ packetloss = packetloss * 100 / NETGRAPH_PACKETS;
+ MSG_WriteByte(&buf, packetloss);
+ // write most recent 3 moves
+ QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
+ QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
+ QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.cmd);
+ // calculate the checksum
+ buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
+ // if delta compression history overflows, request no delta
+ if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
+ cl.qw_validsequence = 0;
+ // request delta compression if appropriate
+ if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
+ {
+ cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
+ MSG_WriteByte(&buf, qw_clc_delta);
+ MSG_WriteByte(&buf, cl.qw_validsequence & 255);
+ }
+ else
+ cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
+ break;
+ case PROTOCOL_QUAKE:
+ case PROTOCOL_QUAKEDP:
+ case PROTOCOL_NEHAHRAMOVIE:
+ case PROTOCOL_NEHAHRABJP:
+ case PROTOCOL_NEHAHRABJP2:
+ case PROTOCOL_NEHAHRABJP3:
// 5 bytes
MSG_WriteByte (&buf, clc_move);
- MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
- // 3 bytes
- for (i = 0;i < 3;i++)
- MSG_WriteAngle8i (&buf, cl.movecmd[0].viewangles[i]);
+ MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
+ // 3 bytes (6 bytes in proquake)
+ if (cls.proquake_servermod == 1) // MOD_PROQUAKE
+ {
+ for (i = 0;i < 3;i++)
+ MSG_WriteAngle16i (&buf, cl.cmd.viewangles[i]);
+ }
+ else
+ {
+ for (i = 0;i < 3;i++)
+ MSG_WriteAngle8i (&buf, cl.cmd.viewangles[i]);
+ }
// 6 bytes
- MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
- MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
- MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
+ MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
+ MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
+ MSG_WriteCoord16i (&buf, cl.cmd.upmove);
// 2 bytes
- MSG_WriteByte (&buf, cl.movecmd[0].buttons);
- MSG_WriteByte (&buf, cl.movecmd[0].impulse);
- }
- else if (cls.protocol == PROTOCOL_DARKPLACES2 || cls.protocol == PROTOCOL_DARKPLACES3)
- {
- CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
-
+ MSG_WriteByte (&buf, cl.cmd.buttons);
+ MSG_WriteByte (&buf, cl.cmd.impulse);
+ break;
+ case PROTOCOL_DARKPLACES2:
+ case PROTOCOL_DARKPLACES3:
// 5 bytes
MSG_WriteByte (&buf, clc_move);
- MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
+ MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
// 12 bytes
for (i = 0;i < 3;i++)
- MSG_WriteAngle32f (&buf, cl.movecmd[0].viewangles[i]);
+ MSG_WriteAngle32f (&buf, cl.cmd.viewangles[i]);
// 6 bytes
- MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
- MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
- MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
+ MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
+ MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
+ MSG_WriteCoord16i (&buf, cl.cmd.upmove);
// 2 bytes
- MSG_WriteByte (&buf, cl.movecmd[0].buttons);
- MSG_WriteByte (&buf, cl.movecmd[0].impulse);
- }
- else if (cls.protocol == PROTOCOL_DARKPLACES1 || cls.protocol == PROTOCOL_DARKPLACES4 || cls.protocol == PROTOCOL_DARKPLACES5)
- {
- CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
-
+ MSG_WriteByte (&buf, cl.cmd.buttons);
+ MSG_WriteByte (&buf, cl.cmd.impulse);
+ break;
+ case PROTOCOL_DARKPLACES1:
+ case PROTOCOL_DARKPLACES4:
+ case PROTOCOL_DARKPLACES5:
// 5 bytes
MSG_WriteByte (&buf, clc_move);
- MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
+ MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
// 6 bytes
for (i = 0;i < 3;i++)
- MSG_WriteAngle16i (&buf, cl.movecmd[0].viewangles[i]);
+ MSG_WriteAngle16i (&buf, cl.cmd.viewangles[i]);
// 6 bytes
- MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
- MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
- MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
+ MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
+ MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
+ MSG_WriteCoord16i (&buf, cl.cmd.upmove);
// 2 bytes
- MSG_WriteByte (&buf, cl.movecmd[0].buttons);
- MSG_WriteByte (&buf, cl.movecmd[0].impulse);
- }
- else if (cls.signon == SIGNONS)
- {
- int maxusercmds;
- usercmd_t *cmd;
-
- // FIXME: cl.movecmd[0].buttons & 16 is +button5, Nexuiz specific
- CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, (cl.movecmd[0].buttons & 16) != 0);
-
+ MSG_WriteByte (&buf, cl.cmd.buttons);
+ MSG_WriteByte (&buf, cl.cmd.impulse);
+ case PROTOCOL_DARKPLACES6:
+ case PROTOCOL_DARKPLACES7:
// set the maxusercmds variable to limit how many should be sent
- maxusercmds = bound(1, cl_netinputpacketlosstolerance.integer + 1, CL_MAX_USERCMDS);
+ maxusercmds = bound(1, cl_netrepeatinput.integer + 1, min(3, CL_MAX_USERCMDS));
// when movement prediction is off, there's not much point in repeating old input as it will just be ignored
if (!cl.cmd.predicted)
maxusercmds = 1;
MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
MSG_WriteShort (&buf, cmd->cursor_entitynumber);
}
+ break;
+ case PROTOCOL_UNKNOWN:
+ break;
}
}
if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
{
- // ack the last few frame numbers
+ // ack entity frame numbers received since the last input was sent
// (redundent to improve handling of client->server packet loss)
- // for LATESTFRAMENUMS == 3 case this is 15 bytes
+ // if cl_netrepeatinput is 1 and client framerate matches server
+ // framerate, this is 10 bytes, if client framerate is lower this
+ // will be more...
+ int i, j;
+ int oldsequence = cl.cmd.sequence - bound(1, cl_netrepeatinput.integer + 1, 3);
+ if (oldsequence < 1)
+ oldsequence = 1;
for (i = 0;i < LATESTFRAMENUMS;i++)
{
- if (cl.latestframenums[i] > 0)
+ j = (cl.latestframenumsposition + i) % LATESTFRAMENUMS;
+ if (cl.latestsendnums[j] >= oldsequence)
{
if (developer_networkentities.integer >= 10)
- Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
+ Con_Printf("send clc_ackframe %i\n", cl.latestframenums[j]);
MSG_WriteByte(&buf, clc_ackframe);
- MSG_WriteLong(&buf, cl.latestframenums[i]);
+ MSG_WriteLong(&buf, cl.latestframenums[j]);
}
}
}
if (buf.cursize || cls.netcon->message.cursize)
NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
+ if (quemove)
+ {
+ // update the cl.movecmd array which holds the most recent moves,
+ // because we now need a new slot for the next input
+ for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
+ cl.movecmd[i] = cl.movecmd[i-1];
+ cl.movecmd[0].msec = 0;
+ cl.movecmd[0].frametime = 0;
+ }
+
+ // clear button 'click' states
+ in_attack.state &= ~2;
+ in_jump.state &= ~2;
+ in_button3.state &= ~2;
+ in_button4.state &= ~2;
+ in_button5.state &= ~2;
+ in_button6.state &= ~2;
+ in_button7.state &= ~2;
+ in_button8.state &= ~2;
+ in_use.state &= ~2;
+ in_button9.state &= ~2;
+ in_button10.state &= ~2;
+ in_button11.state &= ~2;
+ in_button12.state &= ~2;
+ in_button13.state &= ~2;
+ in_button14.state &= ~2;
+ in_button15.state &= ~2;
+ in_button16.state &= ~2;
+ // clear impulse
+ in_impulse = 0;
+
if (cls.netcon->message.overflowed)
{
Con_Print("CL_SendMove: lost server connection\n");
// LordHavoc: added bestweapon command
Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
+#if 0
Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
+#endif
Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
+ Cvar_RegisterVariable(&cl_movecliptokeyboard);
Cvar_RegisterVariable(&cl_movement);
+ Cvar_RegisterVariable(&cl_movement_replay);
+ Cvar_RegisterVariable(&cl_movement_nettimeout);
Cvar_RegisterVariable(&cl_movement_minping);
Cvar_RegisterVariable(&cl_movement_track_canjump);
Cvar_RegisterVariable(&cl_movement_maxspeed);
Cvar_RegisterVariable(&in_pitch_min);
Cvar_RegisterVariable(&in_pitch_max);
Cvar_RegisterVariable(&m_filter);
+ Cvar_RegisterVariable(&m_accelerate);
+ Cvar_RegisterVariable(&m_accelerate_minspeed);
+ Cvar_RegisterVariable(&m_accelerate_maxspeed);
+ Cvar_RegisterVariable(&m_accelerate_filter);
- Cvar_RegisterVariable(&cl_netinputpacketsperserverpacket);
- Cvar_RegisterVariable(&cl_netinputpacketspersecond);
- Cvar_RegisterVariable(&cl_netinputpacketspersecond_qw);
- Cvar_RegisterVariable(&cl_netinputpacketlosstolerance);
+ Cvar_RegisterVariable(&cl_netfps);
+ Cvar_RegisterVariable(&cl_netrepeatinput);
+ Cvar_RegisterVariable(&cl_netimmediatebuttons);
Cvar_RegisterVariable(&cl_nodelta);
+
+ Cvar_RegisterVariable(&cl_csqc_generatemousemoveevents);
}
projects / xonotic / darkplaces.git / blobdiff