#include "quakedef.h"
#include "polygon.h"
-#define COLLISION_SNAPSCALE (8.0f)
+#define COLLISION_SNAPSCALE (32.0f)
#define COLLISION_SNAP (1.0f / COLLISION_SNAPSCALE)
+#define COLLISION_SNAP2 (2.0f / COLLISION_SNAPSCALE)
+#define COLLISION_PLANE_DIST_EPSILON (2.0f / COLLISION_SNAPSCALE)
cvar_t collision_impactnudge = {0, "collision_impactnudge", "0.03125", "how much to back off from the impact"};
cvar_t collision_startnudge = {0, "collision_startnudge", "0", "how much to bias collision trace start"};
for (k = 0;k < brush->numplanes;k++)
{
d = DotProduct(brush->points[j].v, brush->planes[k].normal) - brush->planes[k].dist;
- if (d > (1.0f / 8.0f))
+ if (d > COLLISION_PLANE_DIST_EPSILON)
{
Con_Printf("Collision_ValidateBrush: point #%i (%f %f %f) infront of plane #%i (%f %f %f %f)\n", j, brush->points[j].v[0], brush->points[j].v[1], brush->points[j].v[2], k, brush->planes[k].normal[0], brush->planes[k].normal[1], brush->planes[k].normal[2], brush->planes[k].dist);
printbrush = true;
}
- if (fabs(d) > 0.125f)
+ if (fabs(d) > COLLISION_PLANE_DIST_EPSILON)
pointsoffplanes++;
else
pointonplanes++;
}
-colbrushf_t *Collision_NewBrushFromPlanes(mempool_t *mempool, int numoriginalplanes, const mplane_t *originalplanes, int supercontents)
+colbrushf_t *Collision_NewBrushFromPlanes(mempool_t *mempool, int numoriginalplanes, const colplanef_t *originalplanes, int supercontents)
{
+ // TODO: planesbuf could be replaced by a remapping table
int j, k, m, w;
int numpointsbuf = 0, maxpointsbuf = 256, numplanesbuf = 0, maxplanesbuf = 256, numelementsbuf = 0, maxelementsbuf = 256;
+ double maxdist;
colbrushf_t *brush;
colpointf_t pointsbuf[256];
colplanef_t planesbuf[256];
memset(polypointbuf, 0, sizeof(polypointbuf));
memset(p, 0, sizeof(p));
#endif
+ // figure out how large a bounding box we need to properly compute this brush
+ maxdist = 0;
+ for (j = 0;j < numoriginalplanes;j++)
+ maxdist = max(maxdist, originalplanes[j].dist);
+ // now make it large enough to enclose the entire brush, and round it off to a reasonable multiple of 1024
+ maxdist = floor(maxdist * (4.0 / 1024.0) + 1) * 1024.0;
// construct a collision brush (points, planes, and renderable mesh) from
// a set of planes, this also optimizes out any unnecessary planes (ones
// whose polygon is clipped away by the other planes)
// create a large polygon from the plane
w = 0;
- PolygonD_QuadForPlane(p[w], originalplanes[j].normal[0], originalplanes[j].normal[1], originalplanes[j].normal[2], originalplanes[j].dist, 1024.0*1024.0*1024.0);
+ PolygonD_QuadForPlane(p[w], originalplanes[j].normal[0], originalplanes[j].normal[1], originalplanes[j].normal[2], originalplanes[j].dist, maxdist);
pnumpoints = 4;
// clip it by all other planes
for (k = 0;k < numoriginalplanes && pnumpoints && pnumpoints <= pmaxpoints;k++)
{
+ // skip the plane this polygon
+ // (nothing happens if it is processed, this is just an optimization)
if (k != j)
{
// we want to keep the inside of the brush plane so we flip
// the cutting plane
- PolygonD_Divide(pnumpoints, p[w], -originalplanes[k].normal[0], -originalplanes[k].normal[1], -originalplanes[k].normal[2], -originalplanes[k].dist, 1.0/32.0, pmaxpoints, p[!w], &pnumpoints, 0, NULL, NULL);
+ PolygonD_Divide(pnumpoints, p[w], -originalplanes[k].normal[0], -originalplanes[k].normal[1], -originalplanes[k].normal[2], -originalplanes[k].dist, COLLISION_PLANE_DIST_EPSILON, pmaxpoints, p[!w], &pnumpoints, 0, NULL, NULL, NULL);
w = !w;
}
}
int l, m;
m = 0;
for (l = 0;l < numoriginalplanes;l++)
- if (fabs(DotProduct(&p[w][k*3], originalplanes[l].normal) - originalplanes[l].dist) < 1.0/8.0)
+ if (fabs(DotProduct(&p[w][k*3], originalplanes[l].normal) - originalplanes[l].dist) < COLLISION_PLANE_DIST_EPSILON)
m++;
if (m < 3)
break;
{
// check if there is already a matching point (no duplicates)
for (m = 0;m < numpointsbuf;m++)
- if (VectorDistance2(&p[w][k*3], pointsbuf[m].v) < COLLISION_SNAP)
+ if (VectorDistance2(&p[w][k*3], pointsbuf[m].v) < COLLISION_SNAP2)
break;
// if there is no match, add a new one
// add the new plane
VectorCopy(originalplanes[j].normal, planesbuf[numplanesbuf].normal);
planesbuf[numplanesbuf].dist = originalplanes[j].dist;
+ planesbuf[numplanesbuf].q3surfaceflags = originalplanes[j].q3surfaceflags;
+ planesbuf[numplanesbuf].texture = originalplanes[j].texture;
numplanesbuf++;
}
for (j = 0;j < numplanesbuf;j++)
{
float d = furthestplanedist_float(planesbuf[j].normal, pointsbuf, numpointsbuf);
- if (fabs(planesbuf[j].dist - d) > (1.0f/32.0f))
+ if (fabs(planesbuf[j].dist - d) > COLLISION_PLANE_DIST_EPSILON)
Con_Printf("plane %f %f %f %f mismatches dist %f\n", planesbuf[j].normal[0], planesbuf[j].normal[1], planesbuf[j].normal[2], planesbuf[j].dist, d);
}
}
// allocate the brush and copy to it
- brush = Collision_AllocBrushFloat(mempool, numpointsbuf, numplanesbuf, numelementsbuf / 3, supercontents);
+ brush = (colbrushf_t *)Mem_Alloc(mempool, sizeof(colbrushf_t) + sizeof(colpointf_t) * numpointsbuf + sizeof(colplanef_t) * numplanesbuf + sizeof(int) * numelementsbuf);
+ brush->supercontents = supercontents;
+ brush->numplanes = numplanesbuf;
+ brush->numpoints = numpointsbuf;
+ brush->numtriangles = numelementsbuf / 3;
+ brush->planes = (colplanef_t *)(brush + 1);
+ brush->points = (colpointf_t *)(brush->planes + brush->numplanes);
+ brush->elements = (int *)(brush->points + brush->numpoints);
for (j = 0;j < brush->numpoints;j++)
{
brush->points[j].v[0] = pointsbuf[j].v[0];
brush->planes[j].normal[1] = planesbuf[j].normal[1];
brush->planes[j].normal[2] = planesbuf[j].normal[2];
brush->planes[j].dist = planesbuf[j].dist;
+ brush->planes[j].q3surfaceflags = planesbuf[j].q3surfaceflags;
+ brush->planes[j].texture = planesbuf[j].texture;
}
for (j = 0;j < brush->numtriangles * 3;j++)
brush->elements[j] = elementsbuf[j];
-colbrushf_t *Collision_AllocBrushFloat(mempool_t *mempool, int numpoints, int numplanes, int numtriangles, int supercontents)
-{
- colbrushf_t *brush;
- brush = (colbrushf_t *)Mem_Alloc(mempool, sizeof(colbrushf_t) + sizeof(colpointf_t) * numpoints + sizeof(colplanef_t) * numplanes + sizeof(int[3]) * numtriangles);
- brush->supercontents = supercontents;
- brush->numplanes = numplanes;
- brush->numpoints = numpoints;
- brush->numtriangles = numtriangles;
- brush->planes = (colplanef_t *)(brush + 1);
- brush->points = (colpointf_t *)(brush->planes + brush->numplanes);
- brush->elements = (int *)(brush->points + brush->numpoints);
- return brush;
-}
-
void Collision_CalcPlanesForPolygonBrushFloat(colbrushf_t *brush)
{
int i;
brush->planes[3].dist = DotProduct(brush->points[0].v, brush->planes[3].normal);
brush->planes[4].dist = DotProduct(brush->points[1].v, brush->planes[4].normal);
- if (developer.integer)
+ if (developer.integer >= 100)
{
// validation code
#if 0
}
}
- if (developer.integer)
+ if (developer.integer >= 100)
{
// validity check - will be disabled later
Collision_ValidateBrush(brush);
{
int j;
for (j = 0, p = brush->points;j < brush->numpoints;j++, p++)
- if (DotProduct(p->v, brush->planes[i].normal) > brush->planes[i].dist + (1.0 / 32.0))
+ if (DotProduct(p->v, brush->planes[i].normal) > brush->planes[i].dist + COLLISION_PLANE_DIST_EPSILON)
Con_Printf("Error in brush plane generation, plane %i\n", i);
}
}
// NOTE: start and end of each brush pair must have same numplanes/numpoints
void Collision_TraceBrushBrushFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, const colbrushf_t *thatbrush_start, const colbrushf_t *thatbrush_end)
{
- int nplane, nplane2, fstartsolid, fendsolid, brushsolid;
- float enterfrac, leavefrac, d1, d2, f, imove, newimpactnormal[3], enterfrac2;
+ int nplane, nplane2, fstartsolid = true, fendsolid = true, brushsolid, hitq3surfaceflags = 0;
+ float enterfrac = -1, leavefrac = 1, d1, d2, f, imove, newimpactnormal[3], enterfrac2 = -1;
const colplanef_t *startplane, *endplane;
+ texture_t *hittexture = NULL;
VectorClear(newimpactnormal);
- enterfrac = -1;
- enterfrac2 = -1;
- leavefrac = 1;
- fstartsolid = true;
- fendsolid = true;
for (nplane = 0;nplane < thatbrush_start->numplanes + thisbrush_start->numplanes;nplane++)
{
nplane2 -= thatbrush_start->numplanes;
startplane = thisbrush_start->planes + nplane2;
endplane = thisbrush_end->planes + nplane2;
- if (developer.integer)
+ if (developer.integer >= 100)
{
// any brush with degenerate planes is not worth handling
if (DotProduct(startplane->normal, startplane->normal) < 0.9f || DotProduct(endplane->normal, endplane->normal) < 0.9f)
return;
}
f = furthestplanedist_float(startplane->normal, thisbrush_start->points, thisbrush_start->numpoints);
- if (fabs(f - startplane->dist) > 0.125f)
+ if (fabs(f - startplane->dist) > COLLISION_PLANE_DIST_EPSILON)
Con_Printf("startplane->dist %f != calculated %f (thisbrush_start)\n", startplane->dist, f);
}
d1 = nearestplanedist_float(startplane->normal, thisbrush_start->points, thisbrush_start->numpoints) - furthestplanedist_float(startplane->normal, thatbrush_start->points, thatbrush_start->numpoints) - collision_startnudge.value;
{
startplane = thatbrush_start->planes + nplane2;
endplane = thatbrush_end->planes + nplane2;
- if (developer.integer)
+ if (developer.integer >= 100)
{
// any brush with degenerate planes is not worth handling
if (DotProduct(startplane->normal, startplane->normal) < 0.9f || DotProduct(endplane->normal, endplane->normal) < 0.9f)
return;
}
f = furthestplanedist_float(startplane->normal, thatbrush_start->points, thatbrush_start->numpoints);
- if (fabs(f - startplane->dist) > 0.125f)
+ if (fabs(f - startplane->dist) > COLLISION_PLANE_DIST_EPSILON)
Con_Printf("startplane->dist %f != calculated %f (thatbrush_start)\n", startplane->dist, f);
}
d1 = nearestplanedist_float(startplane->normal, thisbrush_start->points, thisbrush_start->numpoints) - startplane->dist - collision_startnudge.value;
enterfrac = f;
enterfrac2 = f - collision_impactnudge.value * imove;
VectorLerp(startplane->normal, enterfrac, endplane->normal, newimpactnormal);
+ hitq3surfaceflags = startplane->q3surfaceflags;
+ hittexture = startplane->texture;
}
}
}
if (enterfrac < trace->realfraction)
{
enterfrac2 = enterfrac - collision_impactnudge.value * imove;
+ trace->hitsupercontents = thatbrush_start->supercontents;
+ trace->hitq3surfaceflags = thatbrush_start->planes[0].q3surfaceflags;
+ trace->hittexture = thatbrush_start->planes[0].texture;
trace->realfraction = bound(0, enterfrac, 1);
trace->fraction = bound(0, enterfrac2, 1);
VectorLerp(thatbrush_start->planes[0].normal, enterfrac, thatbrush_end->planes[0].normal, trace->plane.normal);
else
#endif
{
+ trace->hitsupercontents = thatbrush_start->supercontents;
+ trace->hitq3surfaceflags = hitq3surfaceflags;
+ trace->hittexture = hittexture;
trace->realfraction = bound(0, enterfrac, 1);
trace->fraction = bound(0, enterfrac2, 1);
VectorCopy(newimpactnormal, trace->plane.normal);
// NOTE: start and end brush pair must have same numplanes/numpoints
void Collision_TraceLineBrushFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const colbrushf_t *thatbrush_start, const colbrushf_t *thatbrush_end)
{
- int nplane, fstartsolid, fendsolid, brushsolid;
- float enterfrac, leavefrac, d1, d2, f, imove, newimpactnormal[3], enterfrac2;
+ int nplane, fstartsolid = true, fendsolid = true, brushsolid, hitq3surfaceflags = 0;
+ float enterfrac = -1, leavefrac = 1, d1, d2, f, imove, newimpactnormal[3], enterfrac2 = -1;
const colplanef_t *startplane, *endplane;
+ texture_t *hittexture = NULL;
VectorClear(newimpactnormal);
- enterfrac = -1;
- enterfrac2 = -1;
- leavefrac = 1;
- fstartsolid = true;
- fendsolid = true;
for (nplane = 0;nplane < thatbrush_start->numplanes;nplane++)
{
endplane = thatbrush_end->planes + nplane;
d1 = DotProduct(startplane->normal, linestart) - startplane->dist - collision_startnudge.value;
d2 = DotProduct(endplane->normal, lineend) - endplane->dist - collision_endnudge.value;
- if (developer.integer)
+ if (developer.integer >= 100)
{
// any brush with degenerate planes is not worth handling
if (DotProduct(startplane->normal, startplane->normal) < 0.9f || DotProduct(endplane->normal, endplane->normal) < 0.9f)
if (thatbrush_start->numpoints)
{
f = furthestplanedist_float(startplane->normal, thatbrush_start->points, thatbrush_start->numpoints);
- if (fabs(f - startplane->dist) > 0.125f)
+ if (fabs(f - startplane->dist) > COLLISION_PLANE_DIST_EPSILON)
Con_Printf("startplane->dist %f != calculated %f\n", startplane->dist, f);
}
}
enterfrac = f;
enterfrac2 = f - collision_impactnudge.value * imove;
VectorLerp(startplane->normal, enterfrac, endplane->normal, newimpactnormal);
+ hitq3surfaceflags = startplane->q3surfaceflags;
+ hittexture = startplane->texture;
}
}
}
// penetrating line segment is normally zero length if this brush was
// generated from a polygon (infinitely thin), and could even be slightly
// positive or negative due to rounding errors in that case.
- if (brushsolid && enterfrac > -1 && enterfrac < trace->realfraction && enterfrac - (1.0f / 1024.0f) <= leavefrac)
+ if (brushsolid && enterfrac > -1 && enterfrac < trace->realfraction && enterfrac <= leavefrac)
{
#if 0
// broken
if (enterfrac < trace->realfraction)
{
enterfrac2 = enterfrac - collision_impactnudge.value * imove;
+ trace->hitsupercontents = thatbrush_start->supercontents;
+ trace->hitq3surfaceflags = hitq3surfaceflags;
+ trace->hittexture = hittexture;
trace->realfraction = bound(0, enterfrac, 1);
trace->fraction = bound(0, enterfrac2, 1);
VectorLerp(thatbrush_start->planes[0].normal, enterfrac, thatbrush_end->planes[0].normal, trace->plane.normal);
else
#endif
{
+ trace->hitsupercontents = thatbrush_start->supercontents;
+ trace->hitq3surfaceflags = hitq3surfaceflags;
+ trace->hittexture = hittexture;
trace->realfraction = bound(0, enterfrac, 1);
trace->fraction = bound(0, enterfrac2, 1);
VectorCopy(newimpactnormal, trace->plane.normal);
Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, &polyf_brush, &polyf_brush);
}
-void Collision_TraceBrushTriangleMeshFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numtriangles, const int *element3i, const float *vertex3f, int supercontents, const vec3_t segmentmins, const vec3_t segmentmaxs)
+void Collision_TraceBrushTriangleMeshFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numtriangles, const int *element3i, const float *vertex3f, int supercontents, int q3surfaceflags, texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
{
int i;
float facemins[3], facemaxs[3];
polyf_brush.points = polyf_points;
polyf_brush.planes = polyf_planes;
polyf_brush.supercontents = supercontents;
+ for (i = 0;i < polyf_brush.numplanes;i++)
+ {
+ polyf_brush.planes[i].q3surfaceflags = q3surfaceflags;
+ polyf_brush.planes[i].texture = texture;
+ }
for (i = 0;i < numtriangles;i++, element3i += 3)
{
VectorCopy(vertex3f + element3i[0] * 3, polyf_points[0].v);
VectorCopy(vertex3f + element3i[1] * 3, polyf_points[1].v);
VectorCopy(vertex3f + element3i[2] * 3, polyf_points[2].v);
Collision_SnapCopyPoints(3, polyf_points, polyf_points, COLLISION_SNAPSCALE, COLLISION_SNAP);
- facemins[0] = min(polyf_points[0].v[0], min(polyf_points[1].v[0], polyf_points[2].v[0])) - 1;
- facemins[1] = min(polyf_points[0].v[1], min(polyf_points[1].v[1], polyf_points[2].v[1])) - 1;
- facemins[2] = min(polyf_points[0].v[2], min(polyf_points[1].v[2], polyf_points[2].v[2])) - 1;
- facemaxs[0] = max(polyf_points[0].v[0], max(polyf_points[1].v[0], polyf_points[2].v[0])) + 1;
- facemaxs[1] = max(polyf_points[0].v[1], max(polyf_points[1].v[1], polyf_points[2].v[1])) + 1;
- facemaxs[2] = max(polyf_points[0].v[2], max(polyf_points[1].v[2], polyf_points[2].v[2])) + 1;
+ facemins[0] = min(polyf_points[0].v[0], min(polyf_points[1].v[0], polyf_points[2].v[0]));
+ facemins[1] = min(polyf_points[0].v[1], min(polyf_points[1].v[1], polyf_points[2].v[1]));
+ facemins[2] = min(polyf_points[0].v[2], min(polyf_points[1].v[2], polyf_points[2].v[2]));
+ facemaxs[0] = max(polyf_points[0].v[0], max(polyf_points[1].v[0], polyf_points[2].v[0]));
+ facemaxs[1] = max(polyf_points[0].v[1], max(polyf_points[1].v[1], polyf_points[2].v[1]));
+ facemaxs[2] = max(polyf_points[0].v[2], max(polyf_points[1].v[2], polyf_points[2].v[2]));
if (BoxesOverlap(segmentmins, segmentmaxs, facemins, facemaxs))
{
Collision_CalcPlanesForPolygonBrushFloat(&polyf_brush);
Collision_TraceLineBrushFloat(trace, linestart, lineend, &polyf_brush, &polyf_brush);
}
-void Collision_TraceLineTriangleMeshFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, int numtriangles, const int *element3i, const float *vertex3f, int supercontents, const vec3_t segmentmins, const vec3_t segmentmaxs)
+void Collision_TraceLineTriangleMeshFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, int numtriangles, const int *element3i, const float *vertex3f, int supercontents, int q3surfaceflags, texture_t *texture, const vec3_t segmentmins, const vec3_t segmentmaxs)
{
int i;
#if 1
// FIXME: snap vertices?
for (i = 0;i < numtriangles;i++, element3i += 3)
- Collision_TraceLineTriangleFloat(trace, linestart, lineend, vertex3f + element3i[0] * 3, vertex3f + element3i[1] * 3, vertex3f + element3i[2] * 3);
+ Collision_TraceLineTriangleFloat(trace, linestart, lineend, vertex3f + element3i[0] * 3, vertex3f + element3i[1] * 3, vertex3f + element3i[2] * 3, supercontents, q3surfaceflags, texture);
#else
polyf_brush.numpoints = 3;
polyf_brush.numplanes = 5;
polyf_brush.points = polyf_points;
polyf_brush.planes = polyf_planes;
polyf_brush.supercontents = supercontents;
+ for (i = 0;i < polyf_brush.numplanes;i++)
+ {
+ polyf_brush.planes[i].supercontents = supercontents;
+ polyf_brush.planes[i].q3surfaceflags = q3surfaceflags;
+ polyf_brush.planes[i].texture = texture;
+ }
for (i = 0;i < numtriangles;i++, element3i += 3)
{
float facemins[3], facemaxs[3];
VectorCopy(vertex3f + element3i[1] * 3, polyf_points[1].v);
VectorCopy(vertex3f + element3i[2] * 3, polyf_points[2].v);
Collision_SnapCopyPoints(numpoints, polyf_points, polyf_points, COLLISION_SNAPSCALE, COLLISION_SNAP);
- facemins[0] = min(polyf_points[0].v[0], min(polyf_points[1].v[0], polyf_points[2].v[0])) - 1;
- facemins[1] = min(polyf_points[0].v[1], min(polyf_points[1].v[1], polyf_points[2].v[1])) - 1;
- facemins[2] = min(polyf_points[0].v[2], min(polyf_points[1].v[2], polyf_points[2].v[2])) - 1;
- facemaxs[0] = max(polyf_points[0].v[0], max(polyf_points[1].v[0], polyf_points[2].v[0])) + 1;
- facemaxs[1] = max(polyf_points[0].v[1], max(polyf_points[1].v[1], polyf_points[2].v[1])) + 1;
- facemaxs[2] = max(polyf_points[0].v[2], max(polyf_points[1].v[2], polyf_points[2].v[2])) + 1;
+ facemins[0] = min(polyf_points[0].v[0], min(polyf_points[1].v[0], polyf_points[2].v[0]));
+ facemins[1] = min(polyf_points[0].v[1], min(polyf_points[1].v[1], polyf_points[2].v[1]));
+ facemins[2] = min(polyf_points[0].v[2], min(polyf_points[1].v[2], polyf_points[2].v[2]));
+ facemaxs[0] = max(polyf_points[0].v[0], max(polyf_points[1].v[0], polyf_points[2].v[0]));
+ facemaxs[1] = max(polyf_points[0].v[1], max(polyf_points[1].v[1], polyf_points[2].v[1]));
+ facemaxs[2] = max(polyf_points[0].v[2], max(polyf_points[1].v[2], polyf_points[2].v[2]));
if (BoxesOverlap(segmentmins, segmentmaxs, facemins, facemaxs))
{
Collision_CalcPlanesForPolygonBrushFloat(&polyf_brush);
static colplanef_t polyf_planesstart[256 + 2], polyf_planesend[256 + 2];
static colbrushf_t polyf_brushstart, polyf_brushend;
-void Collision_TraceBrushPolygonTransformFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numpoints, const float *points, const matrix4x4_t *polygonmatrixstart, const matrix4x4_t *polygonmatrixend, int supercontents)
+void Collision_TraceBrushPolygonTransformFloat(trace_t *trace, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int numpoints, const float *points, const matrix4x4_t *polygonmatrixstart, const matrix4x4_t *polygonmatrixend, int supercontents, int q3surfaceflags, texture_t *texture)
{
int i;
if (numpoints > 256)
polyf_brushend.supercontents = supercontents;
for (i = 0;i < numpoints;i++)
Matrix4x4_Transform(polygonmatrixend, points + i * 3, polyf_brushend.points[i].v);
+ for (i = 0;i < polyf_brushstart.numplanes;i++)
+ {
+ polyf_brushstart.planes[i].q3surfaceflags = q3surfaceflags;
+ polyf_brushstart.planes[i].texture = texture;
+ }
Collision_SnapCopyPoints(numpoints, polyf_pointsstart, polyf_pointsstart, COLLISION_SNAPSCALE, COLLISION_SNAP);
Collision_SnapCopyPoints(numpoints, polyf_pointsend, polyf_pointsend, COLLISION_SNAPSCALE, COLLISION_SNAP);
Collision_CalcPlanesForPolygonBrushFloat(&polyf_brushstart);
int i;
for (i = 0;i < MAX_BRUSHFORBOX;i++)
{
- brushforbox_brush[i].supercontents = SUPERCONTENTS_SOLID;
brushforbox_brush[i].numpoints = 8;
brushforbox_brush[i].numplanes = 6;
brushforbox_brush[i].points = brushforbox_point + i * 8;
brushforbox_brush[i].planes = brushforbox_plane + i * 6;
- brushforpoint_brush[i].supercontents = SUPERCONTENTS_SOLID;
brushforpoint_brush[i].numpoints = 1;
brushforpoint_brush[i].numplanes = 0;
brushforpoint_brush[i].points = brushforbox_point + i * 8;
}
}
-colbrushf_t *Collision_BrushForBox(const matrix4x4_t *matrix, const vec3_t mins, const vec3_t maxs)
+colbrushf_t *Collision_BrushForBox(const matrix4x4_t *matrix, const vec3_t mins, const vec3_t maxs, int supercontents, int q3surfaceflags, texture_t *texture)
{
int i, j;
vec3_t v;
VectorNormalize(brush->planes[i].normal);
}
}
+ brush->supercontents = supercontents;
for (j = 0;j < brush->numplanes;j++)
+ {
+ brush->planes[j].q3surfaceflags = q3surfaceflags;
+ brush->planes[j].texture = texture;
brush->planes[j].dist = furthestplanedist_float(brush->planes[j].normal, brush->points, brush->numpoints);
+ }
VectorCopy(brush->points[0].v, brush->mins);
VectorCopy(brush->points[0].v, brush->maxs);
for (j = 1;j < brush->numpoints;j++)
return brush;
}
-void Collision_ClipTrace_BrushBox(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask)
+void Collision_ClipTrace_BrushBox(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask, int supercontents, int q3surfaceflags, texture_t *texture)
{
colbrushf_t *boxbrush, *thisbrush_start, *thisbrush_end;
- matrix4x4_t identitymatrix;
vec3_t startmins, startmaxs, endmins, endmaxs;
// create brushes for the collision
VectorAdd(start, maxs, startmaxs);
VectorAdd(end, mins, endmins);
VectorAdd(end, maxs, endmaxs);
- Matrix4x4_CreateIdentity(&identitymatrix);
- boxbrush = Collision_BrushForBox(&identitymatrix, cmins, cmaxs);
- thisbrush_start = Collision_BrushForBox(&identitymatrix, startmins, startmaxs);
- thisbrush_end = Collision_BrushForBox(&identitymatrix, endmins, endmaxs);
+ boxbrush = Collision_BrushForBox(&identitymatrix, cmins, cmaxs, supercontents, q3surfaceflags, texture);
+ thisbrush_start = Collision_BrushForBox(&identitymatrix, startmins, startmaxs, 0, 0, NULL);
+ thisbrush_end = Collision_BrushForBox(&identitymatrix, endmins, endmaxs, 0, 0, NULL);
memset(trace, 0, sizeof(trace_t));
trace->hitsupercontentsmask = hitsupercontentsmask;
return impactdist / linelength;
}
-void Collision_TraceLineTriangleFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const float *point0, const float *point1, const float *point2)
+void Collision_TraceLineTriangleFloat(trace_t *trace, const vec3_t linestart, const vec3_t lineend, const float *point0, const float *point1, const float *point2, int supercontents, int q3surfaceflags, texture_t *texture)
{
#if 1
// more optimized
d = 1.0 / sqrt(faceplanenormallength2);
VectorScale(faceplanenormal, d, trace->plane.normal);
trace->plane.dist = faceplanedist * d;
+
+ trace->hitsupercontents = supercontents;
+ trace->hitq3surfaceflags = q3surfaceflags;
+ trace->hittexture = texture;
#else
float d1, d2, d, f, fnudged, impact[3], edgenormal[3], faceplanenormal[3], faceplanedist, edge[3];
//trace->endpos[0] = linestart[0] + fnudged * (lineend[0] - linestart[0]);
//trace->endpos[1] = linestart[1] + fnudged * (lineend[1] - linestart[1]);
//trace->endpos[2] = linestart[2] + fnudged * (lineend[2] - linestart[2]);
+ trace->hitsupercontents = supercontents;
+ trace->hitq3surfaceflags = q3surfaceflags;
+ trace->hittexture = texture;
#endif
}
projects / xonotic / darkplaces.git / blobdiff