#include "wad.h"
-//cvar_t r_subdivide_size = {CVAR_SAVE, "r_subdivide_size", "128", "how large water polygons should be (smaller values produce more polygons which give better warping effects)"};
-cvar_t mod_bsp_portalize = {0, "mod_bsp_portalize", "1", "enables portal generation from BSP tree (may take several seconds per map), used by r_drawportals, r_useportalculling, r_shadow_realtime_world_compileportalculling, sv_cullentities_portal"};
-cvar_t r_novis = {0, "r_novis", "0", "draws whole level, see also sv_cullentities_pvs 0"};
-cvar_t r_nosurftextures = {0, "r_nosurftextures", "0", "pretends there was no texture lump found in the q1bsp/hlbsp loading (useful for debugging this rare case)"};
-cvar_t r_subdivisions_tolerance = {0, "r_subdivisions_tolerance", "4", "maximum error tolerance on curve subdivision for rendering purposes (in other words, the curves will be given as many polygons as necessary to represent curves at this quality)"};
-cvar_t r_subdivisions_mintess = {0, "r_subdivisions_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
-cvar_t r_subdivisions_maxtess = {0, "r_subdivisions_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
-cvar_t r_subdivisions_maxvertices = {0, "r_subdivisions_maxvertices", "65536", "maximum vertices allowed per subdivided curve"};
-cvar_t r_subdivisions_collision_tolerance = {0, "r_subdivisions_collision_tolerance", "15", "maximum error tolerance on curve subdivision for collision purposes (usually a larger error tolerance than for rendering)"};
-cvar_t r_subdivisions_collision_mintess = {0, "r_subdivisions_collision_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
-cvar_t r_subdivisions_collision_maxtess = {0, "r_subdivisions_collision_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
-cvar_t r_subdivisions_collision_maxvertices = {0, "r_subdivisions_collision_maxvertices", "4225", "maximum vertices allowed per subdivided curve"};
-cvar_t r_trippy = {0, "r_trippy", "0", "easter egg"};
-cvar_t r_fxaa = {CVAR_SAVE, "r_fxaa", "0", "fast approximate anti aliasing"};
-cvar_t mod_noshader_default_offsetmapping = {CVAR_SAVE, "mod_noshader_default_offsetmapping", "1", "use offsetmapping by default on all surfaces that are not using q3 shader files"};
-cvar_t mod_obj_orientation = {0, "mod_obj_orientation", "1", "fix orientation of OBJ models to the usual conventions (if zero, use coordinates as is)"};
-cvar_t mod_q2bsp_littransparentsurfaces = {0, "mod_q2bsp_littransparentsurfaces", "0", "allows lighting on rain in 3v3gloom3 and other cases of transparent surfaces that have lightmaps that were ignored by quake2"};
-cvar_t mod_q3bsp_curves_collisions = {0, "mod_q3bsp_curves_collisions", "1", "enables collisions with curves (SLOW)"};
-cvar_t mod_q3bsp_curves_collisions_stride = {0, "mod_q3bsp_curves_collisions_stride", "16", "collisions against curves: optimize performance by doing a combined collision check for this triangle amount first (-1 avoids any box tests)"};
-cvar_t mod_q3bsp_curves_stride = {0, "mod_q3bsp_curves_stride", "16", "particle effect collisions against curves: optimize performance by doing a combined collision check for this triangle amount first (-1 avoids any box tests)"};
-cvar_t mod_q3bsp_optimizedtraceline = {0, "mod_q3bsp_optimizedtraceline", "1", "whether to use optimized traceline code for line traces (as opposed to tracebox code)"};
-cvar_t mod_q3bsp_debugtracebrush = {0, "mod_q3bsp_debugtracebrush", "0", "selects different tracebrush bsp recursion algorithms (for debugging purposes only)"};
-cvar_t mod_q3bsp_lightmapmergepower = {CVAR_SAVE, "mod_q3bsp_lightmapmergepower", "4", "merges the quake3 128x128 lightmap textures into larger lightmap group textures to speed up rendering, 1 = 256x256, 2 = 512x512, 3 = 1024x1024, 4 = 2048x2048, 5 = 4096x4096, ..."};
-cvar_t mod_q3bsp_nolightmaps = {CVAR_SAVE, "mod_q3bsp_nolightmaps", "0", "do not load lightmaps in Q3BSP maps (to save video RAM, but be warned: it looks ugly)"};
-cvar_t mod_q3bsp_tracelineofsight_brushes = {0, "mod_q3bsp_tracelineofsight_brushes", "0", "enables culling of entities behind detail brushes, curves, etc"};
-cvar_t mod_q3bsp_sRGBlightmaps = {0, "mod_q3bsp_sRGBlightmaps", "0", "treat lightmaps from Q3 maps as sRGB when vid_sRGB is active"};
-cvar_t mod_q3shader_default_offsetmapping = {CVAR_SAVE, "mod_q3shader_default_offsetmapping", "1", "use offsetmapping by default on all surfaces that are using q3 shader files"};
-cvar_t mod_q3shader_default_offsetmapping_scale = {CVAR_SAVE, "mod_q3shader_default_offsetmapping_scale", "1", "default scale used for offsetmapping"};
-cvar_t mod_q3shader_default_offsetmapping_bias = {CVAR_SAVE, "mod_q3shader_default_offsetmapping_bias", "0", "default bias used for offsetmapping"};
-cvar_t mod_q3shader_default_polygonfactor = {0, "mod_q3shader_default_polygonfactor", "0", "biases depth values of 'polygonoffset' shaders to prevent z-fighting artifacts"};
-cvar_t mod_q3shader_default_polygonoffset = {0, "mod_q3shader_default_polygonoffset", "-2", "biases depth values of 'polygonoffset' shaders to prevent z-fighting artifacts"};
-cvar_t mod_q3shader_default_refractive_index = { 0, "mod_q3shader_default_refractive_index", "1.33", "angle of refraction specified as n to apply when a photon is refracted, example values are: 1.0003 = air, water = 1.333, crown glass = 1.517, flint glass = 1.655, diamond = 2.417" };
-cvar_t mod_q3shader_force_addalpha = {0, "mod_q3shader_force_addalpha", "0", "treat GL_ONE GL_ONE (or add) blendfunc as GL_SRC_ALPHA GL_ONE for compatibility with older DarkPlaces releases"};
-cvar_t mod_q3shader_force_terrain_alphaflag = {0, "mod_q3shader_force_terrain_alphaflag", "0", "for multilayered terrain shaders force TEXF_ALPHA flag on both layers"};
-
-cvar_t mod_q1bsp_polygoncollisions = {0, "mod_q1bsp_polygoncollisions", "0", "disables use of precomputed cliphulls and instead collides with polygons (uses Bounding Interval Hierarchy optimizations)"};
-cvar_t mod_collision_bih = {0, "mod_collision_bih", "1", "enables use of generated Bounding Interval Hierarchy tree instead of compiled bsp tree in collision code"};
-cvar_t mod_recalculatenodeboxes = {0, "mod_recalculatenodeboxes", "1", "enables use of generated node bounding boxes based on BSP tree portal reconstruction, rather than the node boxes supplied by the map compiler"};
+//cvar_t r_subdivide_size = {CVAR_CLIENT | CVAR_SAVE, "r_subdivide_size", "128", "how large water polygons should be (smaller values produce more polygons which give better warping effects)"};
+cvar_t mod_bsp_portalize = {CVAR_CLIENT | CVAR_SERVER, "mod_bsp_portalize", "1", "enables portal generation from BSP tree (may take several seconds per map), used by r_drawportals, r_useportalculling, r_shadow_realtime_world_compileportalculling, sv_cullentities_portal"};
+cvar_t r_novis = {CVAR_CLIENT, "r_novis", "0", "draws whole level, see also sv_cullentities_pvs 0"};
+cvar_t r_nosurftextures = {CVAR_CLIENT, "r_nosurftextures", "0", "pretends there was no texture lump found in the q1bsp/hlbsp loading (useful for debugging this rare case)"};
+cvar_t r_subdivisions_tolerance = {CVAR_CLIENT, "r_subdivisions_tolerance", "4", "maximum error tolerance on curve subdivision for rendering purposes (in other words, the curves will be given as many polygons as necessary to represent curves at this quality)"};
+cvar_t r_subdivisions_mintess = {CVAR_CLIENT, "r_subdivisions_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
+cvar_t r_subdivisions_maxtess = {CVAR_CLIENT, "r_subdivisions_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
+cvar_t r_subdivisions_maxvertices = {CVAR_CLIENT, "r_subdivisions_maxvertices", "65536", "maximum vertices allowed per subdivided curve"};
+cvar_t r_subdivisions_collision_tolerance = {CVAR_CLIENT, "r_subdivisions_collision_tolerance", "15", "maximum error tolerance on curve subdivision for collision purposes (usually a larger error tolerance than for rendering)"};
+cvar_t r_subdivisions_collision_mintess = {CVAR_CLIENT, "r_subdivisions_collision_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
+cvar_t r_subdivisions_collision_maxtess = {CVAR_CLIENT, "r_subdivisions_collision_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
+cvar_t r_subdivisions_collision_maxvertices = {CVAR_CLIENT, "r_subdivisions_collision_maxvertices", "4225", "maximum vertices allowed per subdivided curve"};
+cvar_t r_trippy = {CVAR_CLIENT, "r_trippy", "0", "easter egg"};
+cvar_t r_fxaa = {CVAR_CLIENT | CVAR_SAVE, "r_fxaa", "0", "fast approximate anti aliasing"};
+cvar_t mod_noshader_default_offsetmapping = {CVAR_CLIENT | CVAR_SAVE, "mod_noshader_default_offsetmapping", "1", "use offsetmapping by default on all surfaces that are not using q3 shader files"};
+cvar_t mod_obj_orientation = {CVAR_CLIENT | CVAR_SERVER, "mod_obj_orientation", "1", "fix orientation of OBJ models to the usual conventions (if zero, use coordinates as is)"};
+cvar_t mod_q2bsp_littransparentsurfaces = {CVAR_CLIENT, "mod_q2bsp_littransparentsurfaces", "0", "allows lighting on rain in 3v3gloom3 and other cases of transparent surfaces that have lightmaps that were ignored by quake2"};
+cvar_t mod_q3bsp_curves_collisions = {CVAR_CLIENT | CVAR_SERVER, "mod_q3bsp_curves_collisions", "1", "enables collisions with curves (SLOW)"};
+cvar_t mod_q3bsp_curves_collisions_stride = {CVAR_CLIENT | CVAR_SERVER, "mod_q3bsp_curves_collisions_stride", "16", "collisions against curves: optimize performance by doing a combined collision check for this triangle amount first (-1 avoids any box tests)"};
+cvar_t mod_q3bsp_curves_stride = {CVAR_CLIENT | CVAR_SERVER, "mod_q3bsp_curves_stride", "16", "particle effect collisions against curves: optimize performance by doing a combined collision check for this triangle amount first (-1 avoids any box tests)"};
+cvar_t mod_q3bsp_optimizedtraceline = {CVAR_CLIENT | CVAR_SERVER, "mod_q3bsp_optimizedtraceline", "1", "whether to use optimized traceline code for line traces (as opposed to tracebox code)"};
+cvar_t mod_q3bsp_debugtracebrush = {CVAR_CLIENT | CVAR_SERVER, "mod_q3bsp_debugtracebrush", "0", "selects different tracebrush bsp recursion algorithms (for debugging purposes only)"};
+cvar_t mod_q3bsp_lightmapmergepower = {CVAR_CLIENT | CVAR_SAVE, "mod_q3bsp_lightmapmergepower", "4", "merges the quake3 128x128 lightmap textures into larger lightmap group textures to speed up rendering, 1 = 256x256, 2 = 512x512, 3 = 1024x1024, 4 = 2048x2048, 5 = 4096x4096, ..."};
+cvar_t mod_q3bsp_nolightmaps = {CVAR_CLIENT | CVAR_SAVE, "mod_q3bsp_nolightmaps", "0", "do not load lightmaps in Q3BSP maps (to save video RAM, but be warned: it looks ugly)"};
+cvar_t mod_q3bsp_tracelineofsight_brushes = {CVAR_CLIENT | CVAR_SERVER, "mod_q3bsp_tracelineofsight_brushes", "0", "enables culling of entities behind detail brushes, curves, etc"};
+cvar_t mod_q3bsp_sRGBlightmaps = {CVAR_CLIENT, "mod_q3bsp_sRGBlightmaps", "0", "treat lightmaps from Q3 maps as sRGB when vid_sRGB is active"};
+cvar_t mod_q3shader_default_offsetmapping = {CVAR_CLIENT | CVAR_SAVE, "mod_q3shader_default_offsetmapping", "1", "use offsetmapping by default on all surfaces that are using q3 shader files"};
+cvar_t mod_q3shader_default_offsetmapping_scale = {CVAR_CLIENT | CVAR_SAVE, "mod_q3shader_default_offsetmapping_scale", "1", "default scale used for offsetmapping"};
+cvar_t mod_q3shader_default_offsetmapping_bias = {CVAR_CLIENT | CVAR_SAVE, "mod_q3shader_default_offsetmapping_bias", "0", "default bias used for offsetmapping"};
+cvar_t mod_q3shader_default_polygonfactor = {CVAR_CLIENT, "mod_q3shader_default_polygonfactor", "0", "biases depth values of 'polygonoffset' shaders to prevent z-fighting artifacts"};
+cvar_t mod_q3shader_default_polygonoffset = {CVAR_CLIENT, "mod_q3shader_default_polygonoffset", "-2", "biases depth values of 'polygonoffset' shaders to prevent z-fighting artifacts"};
+cvar_t mod_q3shader_default_refractive_index = {CVAR_CLIENT, "mod_q3shader_default_refractive_index", "1.33", "angle of refraction specified as n to apply when a photon is refracted, example values are: 1.0003 = air, water = 1.333, crown glass = 1.517, flint glass = 1.655, diamond = 2.417"};
+cvar_t mod_q3shader_force_addalpha = {CVAR_CLIENT, "mod_q3shader_force_addalpha", "0", "treat GL_ONE GL_ONE (or add) blendfunc as GL_SRC_ALPHA GL_ONE for compatibility with older DarkPlaces releases"};
+cvar_t mod_q3shader_force_terrain_alphaflag = {CVAR_CLIENT, "mod_q3shader_force_terrain_alphaflag", "0", "for multilayered terrain shaders force TEXF_ALPHA flag on both layers"};
+
+cvar_t mod_q1bsp_polygoncollisions = {CVAR_CLIENT | CVAR_SERVER, "mod_q1bsp_polygoncollisions", "0", "disables use of precomputed cliphulls and instead collides with polygons (uses Bounding Interval Hierarchy optimizations)"};
+cvar_t mod_collision_bih = {CVAR_CLIENT | CVAR_SERVER, "mod_collision_bih", "1", "enables use of generated Bounding Interval Hierarchy tree instead of compiled bsp tree in collision code"};
+cvar_t mod_recalculatenodeboxes = {CVAR_CLIENT | CVAR_SERVER, "mod_recalculatenodeboxes", "1", "enables use of generated node bounding boxes based on BSP tree portal reconstruction, rather than the node boxes supplied by the map compiler"};
static texture_t mod_q1bsp_texture_solid;
static texture_t mod_q1bsp_texture_sky;
projects / xonotic / darkplaces.git / blobdiff