#include "quakedef.h"
#include "image.h"
#include "r_shadow.h"
+#include "winding.h"
+#include "curves.h"
// note: model_shared.c sets up r_notexture, and r_surf_notexture
cvar_t r_miplightmaps = {CVAR_SAVE, "r_miplightmaps", "0"};
cvar_t r_lightmaprgba = {0, "r_lightmaprgba", "1"};
cvar_t r_nosurftextures = {0, "r_nosurftextures", "0"};
-cvar_t r_sortsurfaces = {0, "r_sortsurfaces", "0"};
+cvar_t mod_q3bsp_curves_subdivide_level = {0, "mod_q3bsp_curves_subdivide_level", "2"};
+cvar_t mod_q3bsp_curves_collisions = {0, "mod_q3bsp_curves_collisions", "1"};
+cvar_t mod_q3bsp_optimizedtraceline = {0, "mod_q3bsp_optimizedtraceline", "1"};
+cvar_t mod_q3bsp_debugtracebrush = {0, "mod_q3bsp_debugtracebrush", "0"};
+static void Mod_Q1BSP_Collision_Init (void);
void Mod_BrushInit(void)
{
// Cvar_RegisterVariable(&r_subdivide_size);
Cvar_RegisterVariable(&r_miplightmaps);
Cvar_RegisterVariable(&r_lightmaprgba);
Cvar_RegisterVariable(&r_nosurftextures);
- Cvar_RegisterVariable(&r_sortsurfaces);
+ Cvar_RegisterVariable(&mod_q3bsp_curves_subdivide_level);
+ Cvar_RegisterVariable(&mod_q3bsp_curves_collisions);
+ Cvar_RegisterVariable(&mod_q3bsp_optimizedtraceline);
+ Cvar_RegisterVariable(&mod_q3bsp_debugtracebrush);
memset(mod_q1bsp_novis, 0xff, sizeof(mod_q1bsp_novis));
+ Mod_Q1BSP_Collision_Init();
}
static mleaf_t *Mod_Q1BSP_PointInLeaf(model_t *model, const vec3_t p)
return (mleaf_t *)node;
}
+static void Mod_Q1BSP_AmbientSoundLevelsForPoint(model_t *model, const vec3_t p, qbyte *out, int outsize)
+{
+ int i;
+ mleaf_t *leaf;
+ leaf = Mod_Q1BSP_PointInLeaf(model, p);
+ if (leaf)
+ {
+ i = min(outsize, (int)sizeof(leaf->ambient_sound_level));;
+ if (i)
+ {
+ memcpy(out, leaf->ambient_sound_level, i);
+ out += i;
+ outsize -= i;
+ }
+ }
+ if (outsize)
+ memset(out, 0, outsize);
+}
+
+static int Mod_Q1BSP_BoxTouchingPVS(model_t *model, const qbyte *pvs, const vec3_t mins, const vec3_t maxs)
+{
+ int clusterindex, side, nodestackindex = 0;
+ mnode_t *node, *nodestack[1024];
+ node = model->brushq1.nodes + model->brushq1.hulls[0].firstclipnode;
+ for (;;)
+ {
+ if (node->plane)
+ {
+ // node - recurse down the BSP tree
+ side = BoxOnPlaneSide(mins, maxs, node->plane) - 1;
+ if (side < 2)
+ {
+ // box is on one side of plane, take that path
+ node = node->children[side];
+ }
+ else
+ {
+ // box crosses plane, take one path and remember the other
+ nodestack[nodestackindex++] = node->children[0];
+ node = node->children[1];
+ }
+ }
+ else
+ {
+ // leaf - check cluster bit
+ clusterindex = ((mleaf_t *)node)->clusterindex;
+ if (CHECKPVSBIT(pvs, clusterindex))
+ {
+ // it is visible, return immediately with the news
+ return true;
+ }
+ else
+ {
+ // nothing to see here, try another path we didn't take earlier
+ if (nodestackindex == 0)
+ break;
+ node = nodestack[--nodestackindex];
+ }
+ }
+ }
+ // it is not visible
+ return false;
+}
+
+/*
static int Mod_Q1BSP_PointContents(model_t *model, const vec3_t p)
{
mnode_t *node;
return ((mleaf_t *)node)->contents;
}
+*/
typedef struct findnonsolidlocationinfo_s
{
float surfnormal[3];
#endif
msurface_t *surf;
- surfmesh_t *mesh;
for (surfnum = 0, mark = leaf->firstmarksurface;surfnum < leaf->nummarksurfaces;surfnum++, mark++)
{
surf = info->model->brushq1.surfaces + *mark;
if (surf->flags & SURF_PLANEBACK)
VectorNegate(surfnormal, surfnormal);
#endif
- for (mesh = surf->mesh;mesh;mesh = mesh->chain)
+ for (k = 0;k < surf->mesh.num_triangles;k++)
{
- for (k = 0;k < mesh->numtriangles;k++)
+ tri = surf->mesh.data_element3i + k * 3;
+ VectorCopy((surf->mesh.data_vertex3f + tri[0] * 3), vert[0]);
+ VectorCopy((surf->mesh.data_vertex3f + tri[1] * 3), vert[1]);
+ VectorCopy((surf->mesh.data_vertex3f + tri[2] * 3), vert[2]);
+ VectorSubtract(vert[1], vert[0], edge[0]);
+ VectorSubtract(vert[2], vert[1], edge[1]);
+ CrossProduct(edge[1], edge[0], facenormal);
+ if (facenormal[0] || facenormal[1] || facenormal[2])
{
- tri = mesh->element3i + k * 3;
- VectorCopy((mesh->vertex3f + tri[0] * 3), vert[0]);
- VectorCopy((mesh->vertex3f + tri[1] * 3), vert[1]);
- VectorCopy((mesh->vertex3f + tri[2] * 3), vert[2]);
- VectorSubtract(vert[1], vert[0], edge[0]);
- VectorSubtract(vert[2], vert[1], edge[1]);
- CrossProduct(edge[1], edge[0], facenormal);
- if (facenormal[0] || facenormal[1] || facenormal[2])
+ VectorNormalize(facenormal);
+#if 0
+ if (VectorDistance(facenormal, surfnormal) > 0.01f)
+ Con_Printf("a2! %f %f %f != %f %f %f\n", facenormal[0], facenormal[1], facenormal[2], surfnormal[0], surfnormal[1], surfnormal[2]);
+#endif
+ f = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
+ if (f <= info->bestdist && f >= -info->bestdist)
{
- VectorNormalize(facenormal);
+ VectorSubtract(vert[0], vert[2], edge[2]);
+ VectorNormalize(edge[0]);
+ VectorNormalize(edge[1]);
+ VectorNormalize(edge[2]);
+ CrossProduct(facenormal, edge[0], edgenormal[0]);
+ CrossProduct(facenormal, edge[1], edgenormal[1]);
+ CrossProduct(facenormal, edge[2], edgenormal[2]);
#if 0
- if (VectorDistance(facenormal, surfnormal) > 0.01f)
- Con_Printf("a2! %f %f %f != %f %f %f\n", facenormal[0], facenormal[1], facenormal[2], surfnormal[0], surfnormal[1], surfnormal[2]);
+ if (samelevel.integer & 1)
+ VectorNegate(edgenormal[0], edgenormal[0]);
+ if (samelevel.integer & 2)
+ VectorNegate(edgenormal[1], edgenormal[1]);
+ if (samelevel.integer & 4)
+ VectorNegate(edgenormal[2], edgenormal[2]);
+ for (i = 0;i < 3;i++)
+ if (DotProduct(vert[0], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f
+ || DotProduct(vert[1], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f
+ || DotProduct(vert[2], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f)
+ Con_Printf("a! %i : %f %f %f (%f %f %f)\n", i, edgenormal[i][0], edgenormal[i][1], edgenormal[i][2], facenormal[0], facenormal[1], facenormal[2]);
#endif
- f = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
- if (f <= info->bestdist && f >= -info->bestdist)
+ // face distance
+ if (DotProduct(info->center, edgenormal[0]) < DotProduct(vert[0], edgenormal[0])
+ && DotProduct(info->center, edgenormal[1]) < DotProduct(vert[1], edgenormal[1])
+ && DotProduct(info->center, edgenormal[2]) < DotProduct(vert[2], edgenormal[2]))
{
- VectorSubtract(vert[0], vert[2], edge[2]);
- VectorNormalize(edge[0]);
- VectorNormalize(edge[1]);
- VectorNormalize(edge[2]);
- CrossProduct(facenormal, edge[0], edgenormal[0]);
- CrossProduct(facenormal, edge[1], edgenormal[1]);
- CrossProduct(facenormal, edge[2], edgenormal[2]);
-#if 0
- if (samelevel.integer & 1)
- VectorNegate(edgenormal[0], edgenormal[0]);
- if (samelevel.integer & 2)
- VectorNegate(edgenormal[1], edgenormal[1]);
- if (samelevel.integer & 4)
- VectorNegate(edgenormal[2], edgenormal[2]);
+ // we got lucky, the center is within the face
+ dist = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
+ if (dist < 0)
+ {
+ dist = -dist;
+ if (info->bestdist > dist)
+ {
+ info->bestdist = dist;
+ VectorScale(facenormal, (info->radius - -dist), info->nudge);
+ }
+ }
+ else
+ {
+ if (info->bestdist > dist)
+ {
+ info->bestdist = dist;
+ VectorScale(facenormal, (info->radius - dist), info->nudge);
+ }
+ }
+ }
+ else
+ {
+ // check which edge or vertex the center is nearest
for (i = 0;i < 3;i++)
- if (DotProduct(vert[0], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f
- || DotProduct(vert[1], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f
- || DotProduct(vert[2], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f)
- Con_Printf("a! %i : %f %f %f (%f %f %f)\n", i, edgenormal[i][0], edgenormal[i][1], edgenormal[i][2], facenormal[0], facenormal[1], facenormal[2]);
-#endif
- // face distance
- if (DotProduct(info->center, edgenormal[0]) < DotProduct(vert[0], edgenormal[0])
- && DotProduct(info->center, edgenormal[1]) < DotProduct(vert[1], edgenormal[1])
- && DotProduct(info->center, edgenormal[2]) < DotProduct(vert[2], edgenormal[2]))
{
- // we got lucky, the center is within the face
- dist = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
- if (dist < 0)
+ f = DotProduct(info->center, edge[i]);
+ if (f >= DotProduct(vert[0], edge[i])
+ && f <= DotProduct(vert[1], edge[i]))
{
- dist = -dist;
+ // on edge
+ VectorMA(info->center, -f, edge[i], point);
+ dist = sqrt(DotProduct(point, point));
if (info->bestdist > dist)
{
info->bestdist = dist;
- VectorScale(facenormal, (info->radius - -dist), info->nudge);
+ VectorScale(point, (info->radius / dist), info->nudge);
}
+ // skip both vertex checks
+ // (both are further away than this edge)
+ i++;
}
else
{
+ // not on edge, check first vertex of edge
+ VectorSubtract(info->center, vert[i], point);
+ dist = sqrt(DotProduct(point, point));
if (info->bestdist > dist)
{
info->bestdist = dist;
- VectorScale(facenormal, (info->radius - dist), info->nudge);
- }
- }
- }
- else
- {
- // check which edge or vertex the center is nearest
- for (i = 0;i < 3;i++)
- {
- f = DotProduct(info->center, edge[i]);
- if (f >= DotProduct(vert[0], edge[i])
- && f <= DotProduct(vert[1], edge[i]))
- {
- // on edge
- VectorMA(info->center, -f, edge[i], point);
- dist = sqrt(DotProduct(point, point));
- if (info->bestdist > dist)
- {
- info->bestdist = dist;
- VectorScale(point, (info->radius / dist), info->nudge);
- }
- // skip both vertex checks
- // (both are further away than this edge)
- i++;
- }
- else
- {
- // not on edge, check first vertex of edge
- VectorSubtract(info->center, vert[i], point);
- dist = sqrt(DotProduct(point, point));
- if (info->bestdist > dist)
- {
- info->bestdist = dist;
- VectorScale(point, (info->radius / dist), info->nudge);
- }
+ VectorScale(point, (info->radius / dist), info->nudge);
}
}
}
VectorCopy(info.center, out);
}
-static qbyte *Mod_Q1BSP_DecompressVis(model_t *model, qbyte *in)
+int Mod_Q1BSP_SuperContentsFromNativeContents(model_t *model, int nativecontents)
{
- static qbyte decompressed[MAX_MAP_LEAFS/8];
- int c;
- qbyte *out;
- int row;
+ switch(nativecontents)
+ {
+ case CONTENTS_EMPTY:
+ return 0;
+ case CONTENTS_SOLID:
+ return SUPERCONTENTS_SOLID;
+ case CONTENTS_WATER:
+ return SUPERCONTENTS_WATER;
+ case CONTENTS_SLIME:
+ return SUPERCONTENTS_SLIME;
+ case CONTENTS_LAVA:
+ return SUPERCONTENTS_LAVA;
+ case CONTENTS_SKY:
+ return SUPERCONTENTS_SKY;
+ }
+ return 0;
+}
+
+int Mod_Q1BSP_NativeContentsFromSuperContents(model_t *model, int supercontents)
+{
+ if (supercontents & SUPERCONTENTS_SOLID)
+ return CONTENTS_SOLID;
+ if (supercontents & SUPERCONTENTS_SKY)
+ return CONTENTS_SKY;
+ if (supercontents & SUPERCONTENTS_LAVA)
+ return CONTENTS_LAVA;
+ if (supercontents & SUPERCONTENTS_SLIME)
+ return CONTENTS_SLIME;
+ if (supercontents & SUPERCONTENTS_WATER)
+ return CONTENTS_WATER;
+ return CONTENTS_EMPTY;
+}
+
+typedef struct
+{
+ // the hull we're tracing through
+ const hull_t *hull;
- row = (model->brushq1.numleafs+7)>>3;
- out = decompressed;
+ // the trace structure to fill in
+ trace_t *trace;
- do
+ // start, end, and end - start (in model space)
+ double start[3];
+ double end[3];
+ double dist[3];
+}
+RecursiveHullCheckTraceInfo_t;
+
+// 1/32 epsilon to keep floating point happy
+#define DIST_EPSILON (0.03125)
+
+#define HULLCHECKSTATE_EMPTY 0
+#define HULLCHECKSTATE_SOLID 1
+#define HULLCHECKSTATE_DONE 2
+
+static int Mod_Q1BSP_RecursiveHullCheck(RecursiveHullCheckTraceInfo_t *t, int num, double p1f, double p2f, double p1[3], double p2[3])
+{
+ // status variables, these don't need to be saved on the stack when
+ // recursing... but are because this should be thread-safe
+ // (note: tracing against a bbox is not thread-safe, yet)
+ int ret;
+ mplane_t *plane;
+ double t1, t2;
+
+ // variables that need to be stored on the stack when recursing
+ dclipnode_t *node;
+ int side;
+ double midf, mid[3];
+
+ // LordHavoc: a goto! everyone flee in terror... :)
+loc0:
+ // check for empty
+ if (num < 0)
{
- if (*in)
+ num = Mod_Q1BSP_SuperContentsFromNativeContents(NULL, num);
+ if (!t->trace->startfound)
{
- *out++ = *in++;
- continue;
+ t->trace->startfound = true;
+ t->trace->startsupercontents |= num;
+ }
+ if (num & SUPERCONTENTS_LIQUIDSMASK)
+ t->trace->inwater = true;
+ if (num == 0)
+ t->trace->inopen = true;
+ if (num & t->trace->hitsupercontentsmask)
+ {
+ // if the first leaf is solid, set startsolid
+ if (t->trace->allsolid)
+ t->trace->startsolid = true;
+#if COLLISIONPARANOID >= 3
+ Con_Printf("S");
+#endif
+ return HULLCHECKSTATE_SOLID;
+ }
+ else
+ {
+ t->trace->allsolid = false;
+#if COLLISIONPARANOID >= 3
+ Con_Printf("E");
+#endif
+ return HULLCHECKSTATE_EMPTY;
+ }
+ }
+
+ // find the point distances
+ node = t->hull->clipnodes + num;
+
+ plane = t->hull->planes + node->planenum;
+ if (plane->type < 3)
+ {
+ t1 = p1[plane->type] - plane->dist;
+ t2 = p2[plane->type] - plane->dist;
+ }
+ else
+ {
+ t1 = DotProduct (plane->normal, p1) - plane->dist;
+ t2 = DotProduct (plane->normal, p2) - plane->dist;
+ }
+
+ if (t1 < 0)
+ {
+ if (t2 < 0)
+ {
+#if COLLISIONPARANOID >= 3
+ Con_Printf("<");
+#endif
+ num = node->children[1];
+ goto loc0;
+ }
+ side = 1;
+ }
+ else
+ {
+ if (t2 >= 0)
+ {
+#if COLLISIONPARANOID >= 3
+ Con_Printf(">");
+#endif
+ num = node->children[0];
+ goto loc0;
+ }
+ side = 0;
+ }
+
+ // the line intersects, find intersection point
+ // LordHavoc: this uses the original trace for maximum accuracy
+#if COLLISIONPARANOID >= 3
+ Con_Printf("M");
+#endif
+ if (plane->type < 3)
+ {
+ t1 = t->start[plane->type] - plane->dist;
+ t2 = t->end[plane->type] - plane->dist;
+ }
+ else
+ {
+ t1 = DotProduct (plane->normal, t->start) - plane->dist;
+ t2 = DotProduct (plane->normal, t->end) - plane->dist;
+ }
+
+ midf = t1 / (t1 - t2);
+ midf = bound(p1f, midf, p2f);
+ VectorMA(t->start, midf, t->dist, mid);
+
+ // recurse both sides, front side first
+ ret = Mod_Q1BSP_RecursiveHullCheck(t, node->children[side], p1f, midf, p1, mid);
+ // if this side is not empty, return what it is (solid or done)
+ if (ret != HULLCHECKSTATE_EMPTY)
+ return ret;
+
+ ret = Mod_Q1BSP_RecursiveHullCheck(t, node->children[side ^ 1], midf, p2f, mid, p2);
+ // if other side is not solid, return what it is (empty or done)
+ if (ret != HULLCHECKSTATE_SOLID)
+ return ret;
+
+ // front is air and back is solid, this is the impact point...
+ if (side)
+ {
+ t->trace->plane.dist = -plane->dist;
+ VectorNegate (plane->normal, t->trace->plane.normal);
+ }
+ else
+ {
+ t->trace->plane.dist = plane->dist;
+ VectorCopy (plane->normal, t->trace->plane.normal);
+ }
+
+ // calculate the true fraction
+ t1 = DotProduct(t->trace->plane.normal, t->start) - t->trace->plane.dist;
+ t2 = DotProduct(t->trace->plane.normal, t->end) - t->trace->plane.dist;
+ midf = t1 / (t1 - t2);
+ t->trace->realfraction = bound(0, midf, 1);
+
+ // calculate the return fraction which is nudged off the surface a bit
+ midf = (t1 - DIST_EPSILON) / (t1 - t2);
+ t->trace->fraction = bound(0, midf, 1);
+
+#if COLLISIONPARANOID >= 3
+ Con_Printf("D");
+#endif
+ return HULLCHECKSTATE_DONE;
+}
+
+#if COLLISIONPARANOID < 2
+static int Mod_Q1BSP_RecursiveHullCheckPoint(RecursiveHullCheckTraceInfo_t *t, int num)
+{
+ while (num >= 0)
+ num = t->hull->clipnodes[num].children[(t->hull->planes[t->hull->clipnodes[num].planenum].type < 3 ? t->start[t->hull->planes[t->hull->clipnodes[num].planenum].type] : DotProduct(t->hull->planes[t->hull->clipnodes[num].planenum].normal, t->start)) < t->hull->planes[t->hull->clipnodes[num].planenum].dist];
+ num = Mod_Q1BSP_SuperContentsFromNativeContents(NULL, num);
+ t->trace->startsupercontents |= num;
+ if (num & SUPERCONTENTS_LIQUIDSMASK)
+ t->trace->inwater = true;
+ if (num == 0)
+ t->trace->inopen = true;
+ if (num & t->trace->hitsupercontentsmask)
+ {
+ t->trace->allsolid = t->trace->startsolid = true;
+ return HULLCHECKSTATE_SOLID;
+ }
+ else
+ {
+ t->trace->allsolid = t->trace->startsolid = false;
+ return HULLCHECKSTATE_EMPTY;
+ }
+}
+#endif
+
+static void Mod_Q1BSP_TraceBox(struct model_s *model, int frame, trace_t *trace, const vec3_t boxstartmins, const vec3_t boxstartmaxs, const vec3_t boxendmins, const vec3_t boxendmaxs, int hitsupercontentsmask)
+{
+ // this function currently only supports same size start and end
+ double boxsize[3];
+ RecursiveHullCheckTraceInfo_t rhc;
+
+ memset(&rhc, 0, sizeof(rhc));
+ memset(trace, 0, sizeof(trace_t));
+ rhc.trace = trace;
+ rhc.trace->hitsupercontentsmask = hitsupercontentsmask;
+ rhc.trace->fraction = 1;
+ rhc.trace->realfraction = 1;
+ rhc.trace->allsolid = true;
+ VectorSubtract(boxstartmaxs, boxstartmins, boxsize);
+ if (boxsize[0] < 3)
+ rhc.hull = &model->brushq1.hulls[0]; // 0x0x0
+ else if (model->brush.ishlbsp)
+ {
+ // LordHavoc: this has to have a minor tolerance (the .1) because of
+ // minor float precision errors from the box being transformed around
+ if (boxsize[0] < 32.1)
+ {
+ if (boxsize[2] < 54) // pick the nearest of 36 or 72
+ rhc.hull = &model->brushq1.hulls[3]; // 32x32x36
+ else
+ rhc.hull = &model->brushq1.hulls[1]; // 32x32x72
+ }
+ else
+ rhc.hull = &model->brushq1.hulls[2]; // 64x64x64
+ }
+ else
+ {
+ // LordHavoc: this has to have a minor tolerance (the .1) because of
+ // minor float precision errors from the box being transformed around
+ if (boxsize[0] < 32.1)
+ rhc.hull = &model->brushq1.hulls[1]; // 32x32x56
+ else
+ rhc.hull = &model->brushq1.hulls[2]; // 64x64x88
+ }
+ VectorSubtract(boxstartmins, rhc.hull->clip_mins, rhc.start);
+ VectorSubtract(boxendmins, rhc.hull->clip_mins, rhc.end);
+ VectorSubtract(rhc.end, rhc.start, rhc.dist);
+#if COLLISIONPARANOID >= 2
+ Con_Printf("t(%f %f %f,%f %f %f,%i %f %f %f)", rhc.start[0], rhc.start[1], rhc.start[2], rhc.end[0], rhc.end[1], rhc.end[2], rhc.hull - model->brushq1.hulls, rhc.hull->clip_mins[0], rhc.hull->clip_mins[1], rhc.hull->clip_mins[2]);
+ Mod_Q1BSP_RecursiveHullCheck(&rhc, rhc.hull->firstclipnode, 0, 1, rhc.start, rhc.end);
+ Con_Printf("\n");
+#else
+ if (DotProduct(rhc.dist, rhc.dist))
+ Mod_Q1BSP_RecursiveHullCheck(&rhc, rhc.hull->firstclipnode, 0, 1, rhc.start, rhc.end);
+ else
+ Mod_Q1BSP_RecursiveHullCheckPoint(&rhc, rhc.hull->firstclipnode);
+#endif
+}
+
+static hull_t box_hull;
+static dclipnode_t box_clipnodes[6];
+static mplane_t box_planes[6];
+
+static void Mod_Q1BSP_Collision_Init (void)
+{
+ int i;
+ int side;
+
+ //Set up the planes and clipnodes so that the six floats of a bounding box
+ //can just be stored out and get a proper hull_t structure.
+
+ box_hull.clipnodes = box_clipnodes;
+ box_hull.planes = box_planes;
+ box_hull.firstclipnode = 0;
+ box_hull.lastclipnode = 5;
+
+ for (i = 0;i < 6;i++)
+ {
+ box_clipnodes[i].planenum = i;
+
+ side = i&1;
+
+ box_clipnodes[i].children[side] = CONTENTS_EMPTY;
+ if (i != 5)
+ box_clipnodes[i].children[side^1] = i + 1;
+ else
+ box_clipnodes[i].children[side^1] = CONTENTS_SOLID;
+
+ box_planes[i].type = i>>1;
+ box_planes[i].normal[i>>1] = 1;
+ }
+}
+
+void Collision_ClipTrace_Box(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask, int boxsupercontents)
+{
+#if 1
+ colbrushf_t cbox;
+ colplanef_t cbox_planes[6];
+ cbox.supercontents = boxsupercontents;
+ cbox.numplanes = 6;
+ cbox.numpoints = 0;
+ cbox.numtriangles = 0;
+ cbox.planes = cbox_planes;
+ cbox.points = NULL;
+ cbox.elements = NULL;
+ cbox.markframe = 0;
+ cbox.mins[0] = 0;
+ cbox.mins[1] = 0;
+ cbox.mins[2] = 0;
+ cbox.maxs[0] = 0;
+ cbox.maxs[1] = 0;
+ cbox.maxs[2] = 0;
+ cbox_planes[0].normal[0] = 1;cbox_planes[0].normal[1] = 0;cbox_planes[0].normal[2] = 0;cbox_planes[0].dist = cmaxs[0] - mins[0];
+ cbox_planes[1].normal[0] = -1;cbox_planes[1].normal[1] = 0;cbox_planes[1].normal[2] = 0;cbox_planes[1].dist = maxs[0] - cmins[0];
+ cbox_planes[2].normal[0] = 0;cbox_planes[2].normal[1] = 1;cbox_planes[2].normal[2] = 0;cbox_planes[2].dist = cmaxs[1] - mins[1];
+ cbox_planes[3].normal[0] = 0;cbox_planes[3].normal[1] = -1;cbox_planes[3].normal[2] = 0;cbox_planes[3].dist = maxs[1] - cmins[1];
+ cbox_planes[4].normal[0] = 0;cbox_planes[4].normal[1] = 0;cbox_planes[4].normal[2] = 1;cbox_planes[4].dist = cmaxs[2] - mins[2];
+ cbox_planes[5].normal[0] = 0;cbox_planes[5].normal[1] = 0;cbox_planes[5].normal[2] = -1;cbox_planes[5].dist = maxs[2] - cmins[2];
+ memset(trace, 0, sizeof(trace_t));
+ trace->hitsupercontentsmask = hitsupercontentsmask;
+ trace->fraction = 1;
+ trace->realfraction = 1;
+ Collision_TraceLineBrushFloat(trace, start, end, &cbox, &cbox);
+#else
+ RecursiveHullCheckTraceInfo_t rhc;
+ // fill in a default trace
+ memset(&rhc, 0, sizeof(rhc));
+ memset(trace, 0, sizeof(trace_t));
+ //To keep everything totally uniform, bounding boxes are turned into small
+ //BSP trees instead of being compared directly.
+ // create a temp hull from bounding box sizes
+ box_planes[0].dist = cmaxs[0] - mins[0];
+ box_planes[1].dist = cmins[0] - maxs[0];
+ box_planes[2].dist = cmaxs[1] - mins[1];
+ box_planes[3].dist = cmins[1] - maxs[1];
+ box_planes[4].dist = cmaxs[2] - mins[2];
+ box_planes[5].dist = cmins[2] - maxs[2];
+#if COLLISIONPARANOID >= 3
+ Con_Printf("box_planes %f:%f %f:%f %f:%f\ncbox %f %f %f:%f %f %f\nbox %f %f %f:%f %f %f\n", box_planes[0].dist, box_planes[1].dist, box_planes[2].dist, box_planes[3].dist, box_planes[4].dist, box_planes[5].dist, cmins[0], cmins[1], cmins[2], cmaxs[0], cmaxs[1], cmaxs[2], mins[0], mins[1], mins[2], maxs[0], maxs[1], maxs[2]);
+#endif
+ // trace a line through the generated clipping hull
+ //rhc.boxsupercontents = boxsupercontents;
+ rhc.hull = &box_hull;
+ rhc.trace = trace;
+ rhc.trace->hitsupercontentsmask = hitsupercontentsmask;
+ rhc.trace->fraction = 1;
+ rhc.trace->realfraction = 1;
+ rhc.trace->allsolid = true;
+ VectorCopy(start, rhc.start);
+ VectorCopy(end, rhc.end);
+ VectorSubtract(rhc.end, rhc.start, rhc.dist);
+ Mod_Q1BSP_RecursiveHullCheck(&rhc, rhc.hull->firstclipnode, 0, 1, rhc.start, rhc.end);
+ //VectorMA(rhc.start, rhc.trace->fraction, rhc.dist, rhc.trace->endpos);
+ if (rhc.trace->startsupercontents)
+ rhc.trace->startsupercontents = boxsupercontents;
+#endif
+}
+
+static int Mod_Q1BSP_LightPoint_RecursiveBSPNode(vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal, const mnode_t *node, float x, float y, float startz, float endz)
+{
+ int side, distz = endz - startz;
+ float front, back;
+ float mid;
+
+loc0:
+ if (node->contents < 0)
+ return false; // didn't hit anything
+
+ switch (node->plane->type)
+ {
+ case PLANE_X:
+ node = node->children[x < node->plane->dist];
+ goto loc0;
+ case PLANE_Y:
+ node = node->children[y < node->plane->dist];
+ goto loc0;
+ case PLANE_Z:
+ side = startz < node->plane->dist;
+ if ((endz < node->plane->dist) == side)
+ {
+ node = node->children[side];
+ goto loc0;
+ }
+ // found an intersection
+ mid = node->plane->dist;
+ break;
+ default:
+ back = front = x * node->plane->normal[0] + y * node->plane->normal[1];
+ front += startz * node->plane->normal[2];
+ back += endz * node->plane->normal[2];
+ side = front < node->plane->dist;
+ if ((back < node->plane->dist) == side)
+ {
+ node = node->children[side];
+ goto loc0;
}
+ // found an intersection
+ mid = startz + distz * (front - node->plane->dist) / (front - back);
+ break;
+ }
- c = in[1];
- in += 2;
- while (c)
+ // go down front side
+ if (node->children[side]->contents >= 0 && Mod_Q1BSP_LightPoint_RecursiveBSPNode(ambientcolor, diffusecolor, diffusenormal, node->children[side], x, y, startz, mid))
+ return true; // hit something
+ else
+ {
+ // check for impact on this node
+ if (node->numsurfaces)
{
- *out++ = 0;
- c--;
+ int i, ds, dt;
+ msurface_t *surf;
+
+ surf = cl.worldmodel->brushq1.surfaces + node->firstsurface;
+ for (i = 0;i < node->numsurfaces;i++, surf++)
+ {
+ if (!(surf->flags & SURF_LIGHTMAP))
+ continue; // no lightmaps
+
+ ds = (int) (x * surf->texinfo->vecs[0][0] + y * surf->texinfo->vecs[0][1] + mid * surf->texinfo->vecs[0][2] + surf->texinfo->vecs[0][3]);
+ dt = (int) (x * surf->texinfo->vecs[1][0] + y * surf->texinfo->vecs[1][1] + mid * surf->texinfo->vecs[1][2] + surf->texinfo->vecs[1][3]);
+
+ if (ds < surf->texturemins[0] || dt < surf->texturemins[1])
+ continue;
+
+ ds -= surf->texturemins[0];
+ dt -= surf->texturemins[1];
+
+ if (ds > surf->extents[0] || dt > surf->extents[1])
+ continue;
+
+ if (surf->samples)
+ {
+ qbyte *lightmap;
+ int maps, line3, size3, dsfrac = ds & 15, dtfrac = dt & 15, scale = 0, r00 = 0, g00 = 0, b00 = 0, r01 = 0, g01 = 0, b01 = 0, r10 = 0, g10 = 0, b10 = 0, r11 = 0, g11 = 0, b11 = 0;
+ line3 = ((surf->extents[0]>>4)+1)*3;
+ size3 = ((surf->extents[0]>>4)+1) * ((surf->extents[1]>>4)+1)*3; // LordHavoc: *3 for colored lighting
+
+ lightmap = surf->samples + ((dt>>4) * ((surf->extents[0]>>4)+1) + (ds>>4))*3; // LordHavoc: *3 for color
+
+ for (maps = 0;maps < MAXLIGHTMAPS && surf->styles[maps] != 255;maps++)
+ {
+ scale = d_lightstylevalue[surf->styles[maps]];
+ r00 += lightmap[ 0] * scale;g00 += lightmap[ 1] * scale;b00 += lightmap[ 2] * scale;
+ r01 += lightmap[ 3] * scale;g01 += lightmap[ 4] * scale;b01 += lightmap[ 5] * scale;
+ r10 += lightmap[line3+0] * scale;g10 += lightmap[line3+1] * scale;b10 += lightmap[line3+2] * scale;
+ r11 += lightmap[line3+3] * scale;g11 += lightmap[line3+4] * scale;b11 += lightmap[line3+5] * scale;
+ lightmap += size3;
+ }
+
+/*
+LordHavoc: here's the readable version of the interpolation
+code, not quite as easy for the compiler to optimize...
+
+dsfrac is the X position in the lightmap pixel, * 16
+dtfrac is the Y position in the lightmap pixel, * 16
+r00 is top left corner, r01 is top right corner
+r10 is bottom left corner, r11 is bottom right corner
+g and b are the same layout.
+r0 and r1 are the top and bottom intermediate results
+
+first we interpolate the top two points, to get the top
+edge sample
+
+ r0 = (((r01-r00) * dsfrac) >> 4) + r00;
+ g0 = (((g01-g00) * dsfrac) >> 4) + g00;
+ b0 = (((b01-b00) * dsfrac) >> 4) + b00;
+
+then we interpolate the bottom two points, to get the
+bottom edge sample
+
+ r1 = (((r11-r10) * dsfrac) >> 4) + r10;
+ g1 = (((g11-g10) * dsfrac) >> 4) + g10;
+ b1 = (((b11-b10) * dsfrac) >> 4) + b10;
+
+then we interpolate the top and bottom samples to get the
+middle sample (the one which was requested)
+
+ r = (((r1-r0) * dtfrac) >> 4) + r0;
+ g = (((g1-g0) * dtfrac) >> 4) + g0;
+ b = (((b1-b0) * dtfrac) >> 4) + b0;
+*/
+
+ ambientcolor[0] += (float) ((((((((r11-r10) * dsfrac) >> 4) + r10)-((((r01-r00) * dsfrac) >> 4) + r00)) * dtfrac) >> 4) + ((((r01-r00) * dsfrac) >> 4) + r00)) * (1.0f / 32768.0f);
+ ambientcolor[1] += (float) ((((((((g11-g10) * dsfrac) >> 4) + g10)-((((g01-g00) * dsfrac) >> 4) + g00)) * dtfrac) >> 4) + ((((g01-g00) * dsfrac) >> 4) + g00)) * (1.0f / 32768.0f);
+ ambientcolor[2] += (float) ((((((((b11-b10) * dsfrac) >> 4) + b10)-((((b01-b00) * dsfrac) >> 4) + b00)) * dtfrac) >> 4) + ((((b01-b00) * dsfrac) >> 4) + b00)) * (1.0f / 32768.0f);
+ }
+ return true; // success
+ }
}
- } while (out - decompressed < row);
- return decompressed;
+ // go down back side
+ node = node->children[side ^ 1];
+ startz = mid;
+ distz = endz - startz;
+ goto loc0;
+ }
+}
+
+void Mod_Q1BSP_LightPoint(model_t *model, const vec3_t p, vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal)
+{
+ Mod_Q1BSP_LightPoint_RecursiveBSPNode(ambientcolor, diffusecolor, diffusenormal, cl.worldmodel->brushq1.nodes + cl.worldmodel->brushq1.hulls[0].firstclipnode, p[0], p[1], p[2], p[2] - 65536);
}
-static qbyte *Mod_Q1BSP_LeafPVS(model_t *model, mleaf_t *leaf)
+static void Mod_Q1BSP_DecompressVis(const qbyte *in, const qbyte *inend, qbyte *out, qbyte *outend)
{
- if (r_novis.integer || leaf == model->brushq1.leafs || leaf->compressed_vis == NULL)
- return mod_q1bsp_novis;
- return Mod_Q1BSP_DecompressVis(model, leaf->compressed_vis);
+ int c;
+ qbyte *outstart = out;
+ while (out < outend)
+ {
+ if (in == inend)
+ {
+ Con_DPrintf("Mod_Q1BSP_DecompressVis: input underrun on model \"%s\" (decompressed %i of %i output bytes)\n", loadmodel->name, out - outstart, outend - outstart);
+ return;
+ }
+ c = *in++;
+ if (c)
+ *out++ = c;
+ else
+ {
+ if (in == inend)
+ {
+ Con_DPrintf("Mod_Q1BSP_DecompressVis: input underrun (during zero-run) on model \"%s\" (decompressed %i of %i output bytes)\n", loadmodel->name, out - outstart, outend - outstart);
+ return;
+ }
+ for (c = *in++;c > 0;c--)
+ {
+ if (out == outend)
+ {
+ Con_DPrintf("Mod_Q1BSP_DecompressVis: output overrun on model \"%s\" (decompressed %i of %i output bytes)\n", loadmodel->name, out - outstart, outend - outstart);
+ return;
+ }
+ *out++ = 0;
+ }
+ }
+ }
}
static void Mod_Q1BSP_LoadTextures(lump_t *l)
loadmodel->brushq1.textures = NULL;
- if (!l->filelen)
- return;
-
- m = (dmiptexlump_t *)(mod_base + l->fileofs);
-
- m->nummiptex = LittleLong (m->nummiptex);
-
// add two slots for notexture walls and notexture liquids
- loadmodel->brushq1.numtextures = m->nummiptex + 2;
+ if (l->filelen)
+ {
+ m = (dmiptexlump_t *)(mod_base + l->fileofs);
+ m->nummiptex = LittleLong (m->nummiptex);
+ loadmodel->brushq1.numtextures = m->nummiptex + 2;
+ }
+ else
+ {
+ m = NULL;
+ loadmodel->brushq1.numtextures = 2;
+ }
+
loadmodel->brushq1.textures = Mem_Alloc(loadmodel->mempool, loadmodel->brushq1.numtextures * sizeof(texture_t));
// fill out all slots with notexture
tx->currentframe = tx;
}
+ if (!m)
+ return;
+
// just to work around bounds checking when debugging with it (array index out of bounds error thing)
dofs = m->dataofs;
// LordHavoc: mostly rewritten map texture loader
}
// LordHavoc: HL sky textures are entirely different than quake
- if (!loadmodel->brushq1.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
+ if (!loadmodel->brush.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
{
if (loadmodel->isworldmodel)
{
if (!Mod_LoadSkinFrame(&tx->skin, tx->name, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE, false, true, true))
{
// did not find external texture, load it from the bsp or wad3
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
{
// internal texture overrides wad
qbyte *pixels, *freepixels, *fogpixels;
qbyte *in, *out, *data, d;
char litfilename[1024];
loadmodel->brushq1.lightdata = NULL;
- if (loadmodel->brushq1.ishlbsp) // LordHavoc: load the colored lighting data straight
+ if (loadmodel->brush.ishlbsp) // LordHavoc: load the colored lighting data straight
{
loadmodel->brushq1.lightdata = Mem_Alloc(loadmodel->mempool, l->filelen);
memcpy(loadmodel->brushq1.lightdata, mod_base + l->fileofs, l->filelen);
else // LordHavoc: bsp version 29 (normal white lighting)
{
// LordHavoc: hope is not lost yet, check for a .lit file to load
- strcpy(litfilename, loadmodel->name);
- FS_StripExtension(litfilename, litfilename);
- strcat(litfilename, ".lit");
+ strlcpy (litfilename, loadmodel->name, sizeof (litfilename));
+ FS_StripExtension (litfilename, litfilename, sizeof (litfilename));
+ strlcat (litfilename, ".lit", sizeof (litfilename));
data = (qbyte*) FS_LoadFile(litfilename, false);
if (data)
{
char lightsfilename[1024], *s, *t, *lightsstring;
mlight_t *e;
- strcpy(lightsfilename, loadmodel->name);
- FS_StripExtension(lightsfilename, lightsfilename);
- strcat(lightsfilename, ".lights");
+ strlcpy (lightsfilename, loadmodel->name, sizeof (lightsfilename));
+ FS_StripExtension (lightsfilename, lightsfilename, sizeof(lightsfilename));
+ strlcat (lightsfilename, ".lights", sizeof (lightsfilename));
s = lightsstring = (char *) FS_LoadFile(lightsfilename, false);
if (s)
{
}
}
-/*
-static int castshadowcount = 0;
-static void Mod_Q1BSP_ProcessLightList(void)
+static void Mod_Q1BSP_LoadVisibility(lump_t *l)
{
- int j, k, l, *mark, lnum;
- mlight_t *e;
- msurface_t *surf;
- float dist;
- mleaf_t *leaf;
- qbyte *pvs;
- vec3_t temp;
- float *v, radius2;
- for (lnum = 0, e = loadmodel->brushq1.lights;lnum < loadmodel->brushq1.numlights;lnum++, e++)
- {
- e->cullradius2 = DotProduct(e->light, e->light) / (e->falloff * e->falloff * 8192.0f * 8192.0f * 2.0f * 2.0f);// + 4096.0f;
- if (e->cullradius2 > 4096.0f * 4096.0f)
- e->cullradius2 = 4096.0f * 4096.0f;
- e->cullradius = e->lightradius = sqrt(e->cullradius2);
- leaf = Mod_Q1BSP_PointInLeaf(e->origin, loadmodel);
- if (leaf->compressed_vis)
- pvs = Mod_Q1BSP_DecompressVis(leaf->compressed_vis, loadmodel);
- else
- pvs = mod_q1bsp_novis;
- for (j = 0;j < loadmodel->brushq1.numsurfaces;j++)
- loadmodel->brushq1.surfacevisframes[j] = -1;
- for (j = 0, leaf = loadmodel->brushq1.leafs + 1;j < loadmodel->brushq1.numleafs - 1;j++, leaf++)
- {
- if (pvs[j >> 3] & (1 << (j & 7)))
- {
- for (k = 0, mark = leaf->firstmarksurface;k < leaf->nummarksurfaces;k++, mark++)
- {
- surf = loadmodel->brushq1.surfaces + *mark;
- if (surf->number != *mark)
- Con_Printf("%d != %d\n", surf->number, *mark);
- dist = DotProduct(e->origin, surf->plane->normal) - surf->plane->dist;
- if (surf->flags & SURF_PLANEBACK)
- dist = -dist;
- if (dist > 0 && dist < e->cullradius)
- {
- temp[0] = bound(surf->poly_mins[0], e->origin[0], surf->poly_maxs[0]) - e->origin[0];
- temp[1] = bound(surf->poly_mins[1], e->origin[1], surf->poly_maxs[1]) - e->origin[1];
- temp[2] = bound(surf->poly_mins[2], e->origin[2], surf->poly_maxs[2]) - e->origin[2];
- if (DotProduct(temp, temp) < lightradius2)
- loadmodel->brushq1.surfacevisframes[*mark] = -2;
- }
- }
- }
- }
- // build list of light receiving surfaces
- e->numsurfaces = 0;
- for (j = 0;j < loadmodel->brushq1.numsurfaces;j++)
- if (loadmodel->brushq1.surfacevisframes[j] == -2)
- e->numsurfaces++;
- e->surfaces = NULL;
- if (e->numsurfaces > 0)
- {
- e->surfaces = Mem_Alloc(loadmodel->mempool, sizeof(msurface_t *) * e->numsurfaces);
- e->numsurfaces = 0;
- for (j = 0;j < loadmodel->brushq1.numsurfaces;j++)
- if (loadmodel->brushq1.surfacevisframes[j] == -2)
- e->surfaces[e->numsurfaces++] = loadmodel->brushq1.surfaces + j;
- }
- // find bounding box and sphere of lit surfaces
- // (these will be used for creating a shape to clip the light)
- radius2 = 0;
- for (j = 0;j < e->numsurfaces;j++)
- {
- surf = e->surfaces[j];
- if (j == 0)
- {
- VectorCopy(surf->poly_verts, e->mins);
- VectorCopy(surf->poly_verts, e->maxs);
- }
- for (k = 0, v = surf->poly_verts;k < surf->poly_numverts;k++, v += 3)
- {
- if (e->mins[0] > v[0]) e->mins[0] = v[0];if (e->maxs[0] < v[0]) e->maxs[0] = v[0];
- if (e->mins[1] > v[1]) e->mins[1] = v[1];if (e->maxs[1] < v[1]) e->maxs[1] = v[1];
- if (e->mins[2] > v[2]) e->mins[2] = v[2];if (e->maxs[2] < v[2]) e->maxs[2] = v[2];
- VectorSubtract(v, e->origin, temp);
- dist = DotProduct(temp, temp);
- if (radius2 < dist)
- radius2 = dist;
- }
- }
- if (e->cullradius2 > radius2)
- {
- e->cullradius2 = radius2;
- e->cullradius = sqrt(e->cullradius2);
- }
- if (e->mins[0] < e->origin[0] - e->lightradius) e->mins[0] = e->origin[0] - e->lightradius;
- if (e->maxs[0] > e->origin[0] + e->lightradius) e->maxs[0] = e->origin[0] + e->lightradius;
- if (e->mins[1] < e->origin[1] - e->lightradius) e->mins[1] = e->origin[1] - e->lightradius;
- if (e->maxs[1] > e->origin[1] + e->lightradius) e->maxs[1] = e->origin[1] + e->lightradius;
- if (e->mins[2] < e->origin[2] - e->lightradius) e->mins[2] = e->origin[2] - e->lightradius;
- if (e->maxs[2] > e->origin[2] + e->lightradius) e->maxs[2] = e->origin[2] + e->lightradius;
- // clip shadow volumes against eachother to remove unnecessary
- // polygons(and sections of polygons)
- {
- //vec3_t polymins, polymaxs;
- int maxverts = 4;
- float *verts = Mem_Alloc(loadmodel->mempool, maxverts * sizeof(float[3]));
- float f, *v0, *v1, projectdistance;
-
- e->shadowvolume = Mod_ShadowMesh_Begin(loadmodel->mempool, 1024);
-#if 0
- {
- vec3_t outermins, outermaxs, innermins, innermaxs;
- innermins[0] = e->mins[0] - 1;
- innermins[1] = e->mins[1] - 1;
- innermins[2] = e->mins[2] - 1;
- innermaxs[0] = e->maxs[0] + 1;
- innermaxs[1] = e->maxs[1] + 1;
- innermaxs[2] = e->maxs[2] + 1;
- outermins[0] = loadmodel->normalmins[0] - 1;
- outermins[1] = loadmodel->normalmins[1] - 1;
- outermins[2] = loadmodel->normalmins[2] - 1;
- outermaxs[0] = loadmodel->normalmaxs[0] + 1;
- outermaxs[1] = loadmodel->normalmaxs[1] + 1;
- outermaxs[2] = loadmodel->normalmaxs[2] + 1;
- // add bounding box around the whole shadow volume set,
- // facing inward to limit light area, with an outer bounding box
- // facing outward (this is needed by the shadow rendering method)
- // X major
- verts[ 0] = innermaxs[0];verts[ 1] = innermins[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermins[1];verts[ 5] = innermins[2];
- verts[ 6] = innermaxs[0];verts[ 7] = innermaxs[1];verts[ 8] = innermins[2];
- verts[ 9] = innermaxs[0];verts[10] = innermaxs[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermaxs[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermaxs[1];verts[ 5] = outermins[2];
- verts[ 6] = outermaxs[0];verts[ 7] = outermins[1];verts[ 8] = outermins[2];
- verts[ 9] = outermaxs[0];verts[10] = outermins[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // X minor
- verts[ 0] = innermins[0];verts[ 1] = innermaxs[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermins[0];verts[ 4] = innermaxs[1];verts[ 5] = innermins[2];
- verts[ 6] = innermins[0];verts[ 7] = innermins[1];verts[ 8] = innermins[2];
- verts[ 9] = innermins[0];verts[10] = innermins[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermins[0];verts[ 1] = outermins[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermins[0];verts[ 4] = outermins[1];verts[ 5] = outermins[2];
- verts[ 6] = outermins[0];verts[ 7] = outermaxs[1];verts[ 8] = outermins[2];
- verts[ 9] = outermins[0];verts[10] = outermaxs[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Y major
- verts[ 0] = innermaxs[0];verts[ 1] = innermaxs[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermaxs[1];verts[ 5] = innermins[2];
- verts[ 6] = innermins[0];verts[ 7] = innermaxs[1];verts[ 8] = innermins[2];
- verts[ 9] = innermins[0];verts[10] = innermaxs[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermins[0];verts[ 1] = outermaxs[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermins[0];verts[ 4] = outermaxs[1];verts[ 5] = outermins[2];
- verts[ 6] = outermaxs[0];verts[ 7] = outermaxs[1];verts[ 8] = outermins[2];
- verts[ 9] = outermaxs[0];verts[10] = outermaxs[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Y minor
- verts[ 0] = innermins[0];verts[ 1] = innermins[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermins[0];verts[ 4] = innermins[1];verts[ 5] = innermins[2];
- verts[ 6] = innermaxs[0];verts[ 7] = innermins[1];verts[ 8] = innermins[2];
- verts[ 9] = innermaxs[0];verts[10] = innermins[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermins[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermins[1];verts[ 5] = outermins[2];
- verts[ 6] = outermins[0];verts[ 7] = outermins[1];verts[ 8] = outermins[2];
- verts[ 9] = outermins[0];verts[10] = outermins[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Z major
- verts[ 0] = innermaxs[0];verts[ 1] = innermins[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermaxs[1];verts[ 5] = innermaxs[2];
- verts[ 6] = innermins[0];verts[ 7] = innermaxs[1];verts[ 8] = innermaxs[2];
- verts[ 9] = innermins[0];verts[10] = innermins[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermaxs[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermins[1];verts[ 5] = outermaxs[2];
- verts[ 6] = outermins[0];verts[ 7] = outermins[1];verts[ 8] = outermaxs[2];
- verts[ 9] = outermins[0];verts[10] = outermaxs[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Z minor
- verts[ 0] = innermaxs[0];verts[ 1] = innermaxs[1];verts[ 2] = innermins[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermins[1];verts[ 5] = innermins[2];
- verts[ 6] = innermins[0];verts[ 7] = innermins[1];verts[ 8] = innermins[2];
- verts[ 9] = innermins[0];verts[10] = innermaxs[1];verts[11] = innermins[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermins[1];verts[ 2] = outermins[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermaxs[1];verts[ 5] = outermins[2];
- verts[ 6] = outermins[0];verts[ 7] = outermaxs[1];verts[ 8] = outermins[2];
- verts[ 9] = outermins[0];verts[10] = outermins[1];verts[11] = outermins[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- }
-#endif
- castshadowcount++;
- for (j = 0;j < e->numsurfaces;j++)
- {
- surf = e->surfaces[j];
- if (surf->flags & SURF_SHADOWCAST)
- surf->castshadow = castshadowcount;
- }
- for (j = 0;j < e->numsurfaces;j++)
- {
- surf = e->surfaces[j];
- if (surf->castshadow != castshadowcount)
- continue;
- f = DotProduct(e->origin, surf->plane->normal) - surf->plane->dist;
- if (surf->flags & SURF_PLANEBACK)
- f = -f;
- projectdistance = e->lightradius;
- if (maxverts < surf->poly_numverts)
- {
- maxverts = surf->poly_numverts;
- if (verts)
- Mem_Free(verts);
- verts = Mem_Alloc(loadmodel->mempool, maxverts * sizeof(float[3]));
- }
- // copy the original polygon, for the front cap of the volume
- for (k = 0, v0 = surf->poly_verts, v1 = verts;k < surf->poly_numverts;k++, v0 += 3, v1 += 3)
- VectorCopy(v0, v1);
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, surf->poly_numverts, verts);
- // project the original polygon, reversed, for the back cap of the volume
- for (k = 0, v0 = surf->poly_verts + (surf->poly_numverts - 1) * 3, v1 = verts;k < surf->poly_numverts;k++, v0 -= 3, v1 += 3)
- {
- VectorSubtract(v0, e->origin, temp);
- VectorNormalize(temp);
- VectorMA(v0, projectdistance, temp, v1);
- }
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, surf->poly_numverts, verts);
- // project the shadow volume sides
- for (l = surf->poly_numverts - 1, k = 0, v0 = surf->poly_verts + (surf->poly_numverts - 1) * 3, v1 = surf->poly_verts;k < surf->poly_numverts;l = k, k++, v0 = v1, v1 += 3)
- {
- if (!surf->neighborsurfaces[l] || surf->neighborsurfaces[l]->castshadow != castshadowcount)
- {
- VectorCopy(v1, &verts[0]);
- VectorCopy(v0, &verts[3]);
- VectorCopy(v0, &verts[6]);
- VectorCopy(v1, &verts[9]);
- VectorSubtract(&verts[6], e->origin, temp);
- VectorNormalize(temp);
- VectorMA(&verts[6], projectdistance, temp, &verts[6]);
- VectorSubtract(&verts[9], e->origin, temp);
- VectorNormalize(temp);
- VectorMA(&verts[9], projectdistance, temp, &verts[9]);
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- }
- }
- }
- // build the triangle mesh
- e->shadowvolume = Mod_ShadowMesh_Finish(loadmodel->mempool, e->shadowvolume);
- {
- shadowmesh_t *mesh;
- l = 0;
- for (mesh = e->shadowvolume;mesh;mesh = mesh->next)
- l += mesh->numtriangles;
- Con_Printf("light %i shadow volume built containing %i triangles\n", lnum, l);
- }
- }
- }
-}
-*/
-
-
-static void Mod_Q1BSP_LoadVisibility(lump_t *l)
-{
- loadmodel->brushq1.visdata = NULL;
+ loadmodel->brushq1.num_compressedpvs = 0;
+ loadmodel->brushq1.data_compressedpvs = NULL;
if (!l->filelen)
return;
- loadmodel->brushq1.visdata = Mem_Alloc(loadmodel->mempool, l->filelen);
- memcpy(loadmodel->brushq1.visdata, mod_base + l->fileofs, l->filelen);
+ loadmodel->brushq1.num_compressedpvs = l->filelen;
+ loadmodel->brushq1.data_compressedpvs = Mem_Alloc(loadmodel->mempool, l->filelen);
+ memcpy(loadmodel->brushq1.data_compressedpvs, mod_base + l->fileofs, l->filelen);
}
// used only for HalfLife maps
int i, j, k;
if (!data)
return;
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
return; // error
if (com_token[0] != '{')
return; // error
while (1)
{
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
return; // error
if (com_token[0] == '}')
break; // end of worldspawn
strcpy(key, com_token);
while (key[strlen(key)-1] == ' ') // remove trailing spaces
key[strlen(key)-1] = 0;
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
return; // error
strcpy(value, com_token);
if (!strcmp("wad", key)) // for HalfLife maps
{
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
{
j = 0;
for (i = 0;i < 4096;i++)
return;
loadmodel->brush.entities = Mem_Alloc(loadmodel->mempool, l->filelen);
memcpy(loadmodel->brush.entities, mod_base + l->fileofs, l->filelen);
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
Mod_Q1BSP_ParseWadsFromEntityLump(loadmodel->brush.entities);
}
out = Mem_Alloc(loadmodel->mempool, count*sizeof(*out));
loadmodel->brushq1.submodels = out;
- loadmodel->brushq1.numsubmodels = count;
+ loadmodel->brush.numsubmodels = count;
for ( i=0 ; i<count ; i++, in++, out++)
{
Host_Error("Mod_Q1BSP_GenerateWarpMesh: no triangles?\n");
surf->mesh = mesh = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) + subdivpolytriangles * sizeof(int[3]) + subdivpolyverts * sizeof(surfvertex_t));
- mesh->numverts = subdivpolyverts;
- mesh->numtriangles = subdivpolytriangles;
+ mesh->num_vertices = subdivpolyverts;
+ mesh->num_triangles = subdivpolytriangles;
mesh->vertex = (surfvertex_t *)(mesh + 1);
- mesh->index = (int *)(mesh->vertex + mesh->numverts);
- memset(mesh->vertex, 0, mesh->numverts * sizeof(surfvertex_t));
+ mesh->index = (int *)(mesh->vertex + mesh->num_vertices);
+ memset(mesh->vertex, 0, mesh->num_vertices * sizeof(surfvertex_t));
- for (i = 0;i < mesh->numtriangles;i++)
+ for (i = 0;i < mesh->num_triangles;i++)
for (j = 0;j < 3;j++)
mesh->index[i*3+j] = subdivpolyindex[i][j];
{
surfmesh_t *mesh;
mesh = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) + numtriangles * sizeof(int[6]) + numverts * (3 + 2 + 2 + 2 + 3 + 3 + 3 + 1) * sizeof(float));
- mesh->numverts = numverts;
- mesh->numtriangles = numtriangles;
- mesh->vertex3f = (float *)(mesh + 1);
- mesh->texcoordtexture2f = mesh->vertex3f + mesh->numverts * 3;
- mesh->texcoordlightmap2f = mesh->texcoordtexture2f + mesh->numverts * 2;
- mesh->texcoorddetail2f = mesh->texcoordlightmap2f + mesh->numverts * 2;
- mesh->svector3f = (float *)(mesh->texcoorddetail2f + mesh->numverts * 2);
- mesh->tvector3f = mesh->svector3f + mesh->numverts * 3;
- mesh->normal3f = mesh->tvector3f + mesh->numverts * 3;
- mesh->lightmapoffsets = (int *)(mesh->normal3f + mesh->numverts * 3);
- mesh->element3i = mesh->lightmapoffsets + mesh->numverts;
- mesh->neighbor3i = mesh->element3i + mesh->numtriangles * 3;
+ mesh->num_vertices = numverts;
+ mesh->num_triangles = numtriangles;
+ mesh->data_vertex3f = (float *)(mesh + 1);
+ mesh->data_texcoordtexture2f = mesh->data_vertex3f + mesh->num_vertices * 3;
+ mesh->data_texcoordlightmap2f = mesh->data_texcoordtexture2f + mesh->num_vertices * 2;
+ mesh->data_texcoorddetail2f = mesh->data_texcoordlightmap2f + mesh->num_vertices * 2;
+ mesh->data_svector3f = (float *)(mesh->data_texcoorddetail2f + mesh->num_vertices * 2);
+ mesh->data_tvector3f = mesh->data_svector3f + mesh->num_vertices * 3;
+ mesh->data_normal3f = mesh->data_tvector3f + mesh->num_vertices * 3;
+ mesh->data_lightmapoffsets = (int *)(mesh->data_normal3f + mesh->num_vertices * 3);
+ mesh->data_element3i = mesh->data_lightmapoffsets + mesh->num_vertices;
+ mesh->data_neighbor3i = mesh->data_element3i + mesh->num_triangles * 3;
return mesh;
}
i = LittleLong(in->lightofs);
if (i == -1)
surf->samples = NULL;
- else if (loadmodel->brushq1.ishlbsp) // LordHavoc: HalfLife map (bsp version 30)
+ else if (loadmodel->brush.ishlbsp) // LordHavoc: HalfLife map (bsp version 30)
surf->samples = loadmodel->brushq1.lightdata + i;
else // LordHavoc: white lighting (bsp version 29)
surf->samples = loadmodel->brushq1.lightdata + (i * 3);
}
loadmodel->brushq1.entiremesh = Mod_Q1BSP_AllocSurfMesh(totalverts, totaltris);
- loadmodel->brushq1.surfmeshes = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) * totalmeshes);
for (surfnum = 0, surf = loadmodel->brushq1.surfaces, totalverts = 0, totaltris = 0, totalmeshes = 0;surfnum < count;surfnum++, totalverts += surf->poly_numverts, totaltris += surf->poly_numverts - 2, totalmeshes++, surf++)
{
- mesh = surf->mesh = loadmodel->brushq1.surfmeshes + totalmeshes;
- mesh->numverts = surf->poly_numverts;
- mesh->numtriangles = surf->poly_numverts - 2;
- mesh->vertex3f = loadmodel->brushq1.entiremesh->vertex3f + totalverts * 3;
- mesh->texcoordtexture2f = loadmodel->brushq1.entiremesh->texcoordtexture2f + totalverts * 2;
- mesh->texcoordlightmap2f = loadmodel->brushq1.entiremesh->texcoordlightmap2f + totalverts * 2;
- mesh->texcoorddetail2f = loadmodel->brushq1.entiremesh->texcoorddetail2f + totalverts * 2;
- mesh->svector3f = loadmodel->brushq1.entiremesh->svector3f + totalverts * 3;
- mesh->tvector3f = loadmodel->brushq1.entiremesh->tvector3f + totalverts * 3;
- mesh->normal3f = loadmodel->brushq1.entiremesh->normal3f + totalverts * 3;
- mesh->lightmapoffsets = loadmodel->brushq1.entiremesh->lightmapoffsets + totalverts;
- mesh->element3i = loadmodel->brushq1.entiremesh->element3i + totaltris * 3;
- mesh->neighbor3i = loadmodel->brushq1.entiremesh->neighbor3i + totaltris * 3;
+ mesh = &surf->mesh;
+ mesh->num_vertices = surf->poly_numverts;
+ mesh->num_triangles = surf->poly_numverts - 2;
+ mesh->data_vertex3f = loadmodel->brushq1.entiremesh->data_vertex3f + totalverts * 3;
+ mesh->data_texcoordtexture2f = loadmodel->brushq1.entiremesh->data_texcoordtexture2f + totalverts * 2;
+ mesh->data_texcoordlightmap2f = loadmodel->brushq1.entiremesh->data_texcoordlightmap2f + totalverts * 2;
+ mesh->data_texcoorddetail2f = loadmodel->brushq1.entiremesh->data_texcoorddetail2f + totalverts * 2;
+ mesh->data_svector3f = loadmodel->brushq1.entiremesh->data_svector3f + totalverts * 3;
+ mesh->data_tvector3f = loadmodel->brushq1.entiremesh->data_tvector3f + totalverts * 3;
+ mesh->data_normal3f = loadmodel->brushq1.entiremesh->data_normal3f + totalverts * 3;
+ mesh->data_lightmapoffsets = loadmodel->brushq1.entiremesh->data_lightmapoffsets + totalverts;
+ mesh->data_element3i = loadmodel->brushq1.entiremesh->data_element3i + totaltris * 3;
+ mesh->data_neighbor3i = loadmodel->brushq1.entiremesh->data_neighbor3i + totaltris * 3;
surf->lightmaptexturestride = 0;
surf->lightmaptexture = NULL;
- for (i = 0;i < mesh->numverts;i++)
+ for (i = 0;i < mesh->num_vertices;i++)
{
- mesh->vertex3f[i * 3 + 0] = surf->poly_verts[i * 3 + 0];
- mesh->vertex3f[i * 3 + 1] = surf->poly_verts[i * 3 + 1];
- mesh->vertex3f[i * 3 + 2] = surf->poly_verts[i * 3 + 2];
- s = DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[0]) + surf->texinfo->vecs[0][3];
- t = DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[1]) + surf->texinfo->vecs[1][3];
- mesh->texcoordtexture2f[i * 2 + 0] = s / surf->texinfo->texture->width;
- mesh->texcoordtexture2f[i * 2 + 1] = t / surf->texinfo->texture->height;
- mesh->texcoorddetail2f[i * 2 + 0] = s * (1.0f / 16.0f);
- mesh->texcoorddetail2f[i * 2 + 1] = t * (1.0f / 16.0f);
- mesh->texcoordlightmap2f[i * 2 + 0] = 0;
- mesh->texcoordlightmap2f[i * 2 + 1] = 0;
- mesh->lightmapoffsets[i] = 0;
+ mesh->data_vertex3f[i * 3 + 0] = surf->poly_verts[i * 3 + 0];
+ mesh->data_vertex3f[i * 3 + 1] = surf->poly_verts[i * 3 + 1];
+ mesh->data_vertex3f[i * 3 + 2] = surf->poly_verts[i * 3 + 2];
+ s = DotProduct((mesh->data_vertex3f + i * 3), surf->texinfo->vecs[0]) + surf->texinfo->vecs[0][3];
+ t = DotProduct((mesh->data_vertex3f + i * 3), surf->texinfo->vecs[1]) + surf->texinfo->vecs[1][3];
+ mesh->data_texcoordtexture2f[i * 2 + 0] = s / surf->texinfo->texture->width;
+ mesh->data_texcoordtexture2f[i * 2 + 1] = t / surf->texinfo->texture->height;
+ mesh->data_texcoorddetail2f[i * 2 + 0] = s * (1.0f / 16.0f);
+ mesh->data_texcoorddetail2f[i * 2 + 1] = t * (1.0f / 16.0f);
+ mesh->data_texcoordlightmap2f[i * 2 + 0] = 0;
+ mesh->data_texcoordlightmap2f[i * 2 + 1] = 0;
+ mesh->data_lightmapoffsets[i] = 0;
}
- for (i = 0;i < mesh->numtriangles;i++)
+ for (i = 0;i < mesh->num_triangles;i++)
{
- mesh->element3i[i * 3 + 0] = 0;
- mesh->element3i[i * 3 + 1] = i + 1;
- mesh->element3i[i * 3 + 2] = i + 2;
+ mesh->data_element3i[i * 3 + 0] = 0;
+ mesh->data_element3i[i * 3 + 1] = i + 1;
+ mesh->data_element3i[i * 3 + 2] = i + 2;
}
- Mod_BuildTriangleNeighbors(mesh->neighbor3i, mesh->element3i, mesh->numtriangles);
- Mod_BuildTextureVectorsAndNormals(mesh->numverts, mesh->numtriangles, mesh->vertex3f, mesh->texcoordtexture2f, mesh->element3i, mesh->svector3f, mesh->tvector3f, mesh->normal3f);
+ Mod_BuildTriangleNeighbors(mesh->data_neighbor3i, mesh->data_element3i, mesh->num_triangles);
+ Mod_BuildTextureVectorsAndNormals(mesh->num_vertices, mesh->num_triangles, mesh->data_vertex3f, mesh->data_texcoordtexture2f, mesh->data_element3i, mesh->data_svector3f, mesh->data_tvector3f, mesh->data_normal3f);
if (surf->texinfo->texture->shader == &Cshader_wall_lightmap)
{
uscale = (uscale - ubase) / (smax + 1);
vscale = (vscale - vbase) / (tmax + 1);
- for (i = 0;i < mesh->numverts;i++)
+ for (i = 0;i < mesh->num_vertices;i++)
{
- u = ((DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[0]) + surf->texinfo->vecs[0][3]) + 8 - surf->texturemins[0]) * (1.0 / 16.0);
- v = ((DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[1]) + surf->texinfo->vecs[1][3]) + 8 - surf->texturemins[1]) * (1.0 / 16.0);
- mesh->texcoordlightmap2f[i * 2 + 0] = u * uscale + ubase;
- mesh->texcoordlightmap2f[i * 2 + 1] = v * vscale + vbase;
+ u = ((DotProduct((mesh->data_vertex3f + i * 3), surf->texinfo->vecs[0]) + surf->texinfo->vecs[0][3]) + 8 - surf->texturemins[0]) * (1.0 / 16.0);
+ v = ((DotProduct((mesh->data_vertex3f + i * 3), surf->texinfo->vecs[1]) + surf->texinfo->vecs[1][3]) + 8 - surf->texturemins[1]) * (1.0 / 16.0);
+ mesh->data_texcoordlightmap2f[i * 2 + 0] = u * uscale + ubase;
+ mesh->data_texcoordlightmap2f[i * 2 + 1] = v * vscale + vbase;
// LordHavoc: calc lightmap data offset for vertex lighting to use
iu = (int) u;
iv = (int) v;
- mesh->lightmapoffsets[i] = (bound(0, iv, tmax) * (smax+1) + bound(0, iu, smax)) * 3;
+ mesh->data_lightmapoffsets[i] = (bound(0, iv, tmax) * (smax+1) + bound(0, iu, smax)) * 3;
}
}
}
if (p >= 0)
out->children[j] = loadmodel->brushq1.nodes + p;
else
- out->children[j] = (mnode_t *)(loadmodel->brushq1.leafs + (-1 - p));
+ out->children[j] = (mnode_t *)(loadmodel->brushq1.data_leafs + (-1 - p));
}
}
static void Mod_Q1BSP_LoadLeafs(lump_t *l)
{
- dleaf_t *in;
- mleaf_t *out;
- int i, j, count, p;
+ dleaf_t *in;
+ mleaf_t *out;
+ int i, j, count, p;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count*sizeof(*out));
- loadmodel->brushq1.leafs = out;
- loadmodel->brushq1.numleafs = count;
+ loadmodel->brushq1.data_leafs = out;
+ loadmodel->brushq1.num_leafs = count;
+ // get visleafs from the submodel data
+ loadmodel->brushq1.num_pvsclusters = loadmodel->brushq1.submodels[0].visleafs;
+ loadmodel->brushq1.num_pvsclusterbytes = (loadmodel->brushq1.num_pvsclusters+7)>>3;
+ loadmodel->brushq1.data_pvsclusters = Mem_Alloc(loadmodel->mempool, loadmodel->brushq1.num_pvsclusters * loadmodel->brushq1.num_pvsclusterbytes);
+ memset(loadmodel->brushq1.data_pvsclusters, 0xFF, loadmodel->brushq1.num_pvsclusters * loadmodel->brushq1.num_pvsclusterbytes);
for ( i=0 ; i<count ; i++, in++, out++)
{
out->maxs[j] = LittleShort(in->maxs[j]);
}
- p = LittleLong(in->contents);
- out->contents = p;
+ // FIXME: this function could really benefit from some error checking
- out->firstmarksurface = loadmodel->brushq1.marksurfaces +
- LittleShort(in->firstmarksurface);
+ out->contents = LittleLong(in->contents);
+
+ out->firstmarksurface = loadmodel->brushq1.marksurfaces + LittleShort(in->firstmarksurface);
out->nummarksurfaces = LittleShort(in->nummarksurfaces);
+ if (out->firstmarksurface < 0 || LittleShort(in->firstmarksurface) + out->nummarksurfaces > loadmodel->brushq1.nummarksurfaces)
+ {
+ Con_Printf("Mod_Q1BSP_LoadLeafs: invalid marksurface range %i:%i outside range %i:%i\n", out->firstmarksurface, out->firstmarksurface + out->nummarksurfaces, 0, loadmodel->brushq1.nummarksurfaces);
+ out->firstmarksurface = NULL;
+ out->nummarksurfaces = 0;
+ }
+
+ out->clusterindex = i - 1;
+ if (out->clusterindex >= loadmodel->brushq1.num_pvsclusters)
+ out->clusterindex = -1;
p = LittleLong(in->visofs);
- if (p == -1)
- out->compressed_vis = NULL;
- else
- out->compressed_vis = loadmodel->brushq1.visdata + p;
+ // ignore visofs errors on leaf 0 (solid)
+ if (p >= 0 && out->clusterindex >= 0)
+ {
+ if (p >= loadmodel->brushq1.num_compressedpvs)
+ Con_Printf("Mod_Q1BSP_LoadLeafs: invalid visofs\n");
+ else
+ Mod_Q1BSP_DecompressVis(loadmodel->brushq1.data_compressedpvs + p, loadmodel->brushq1.data_compressedpvs + loadmodel->brushq1.num_compressedpvs, loadmodel->brushq1.data_pvsclusters + out->clusterindex * loadmodel->brushq1.num_pvsclusterbytes, loadmodel->brushq1.data_pvsclusters + (out->clusterindex + 1) * loadmodel->brushq1.num_pvsclusterbytes);
+ }
- for (j=0 ; j<4 ; j++)
+ for (j = 0;j < 4;j++)
out->ambient_sound_level[j] = in->ambient_level[j];
// FIXME: Insert caustics here
loadmodel->brushq1.clipnodes = out;
loadmodel->brushq1.numclipnodes = count;
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
{
hull = &loadmodel->brushq1.hulls[1];
hull->clipnodes = out;
}
}
-#define MAX_POINTS_ON_WINDING 64
-
-typedef struct
-{
- int numpoints;
- int padding;
- double points[8][3]; // variable sized
-}
-winding_t;
-
-/*
-==================
-NewWinding
-==================
-*/
-static winding_t *NewWinding(int points)
-{
- winding_t *w;
- int size;
-
- if (points > MAX_POINTS_ON_WINDING)
- Sys_Error("NewWinding: too many points\n");
-
- size = sizeof(winding_t) + sizeof(double[3]) * (points - 8);
- w = Mem_Alloc(loadmodel->mempool, size);
- memset(w, 0, size);
-
- return w;
-}
-
-static void FreeWinding(winding_t *w)
-{
- Mem_Free(w);
-}
-
-/*
-=================
-BaseWindingForPlane
-=================
-*/
-static winding_t *BaseWindingForPlane(mplane_t *p)
-{
- double org[3], vright[3], vup[3], normal[3];
- winding_t *w;
-
- VectorCopy(p->normal, normal);
- VectorVectorsDouble(normal, vright, vup);
-
- VectorScale(vup, 1024.0*1024.0*1024.0, vup);
- VectorScale(vright, 1024.0*1024.0*1024.0, vright);
-
- // project a really big axis aligned box onto the plane
- w = NewWinding(4);
-
- VectorScale(p->normal, p->dist, org);
-
- VectorSubtract(org, vright, w->points[0]);
- VectorAdd(w->points[0], vup, w->points[0]);
-
- VectorAdd(org, vright, w->points[1]);
- VectorAdd(w->points[1], vup, w->points[1]);
-
- VectorAdd(org, vright, w->points[2]);
- VectorSubtract(w->points[2], vup, w->points[2]);
-
- VectorSubtract(org, vright, w->points[3]);
- VectorSubtract(w->points[3], vup, w->points[3]);
-
- w->numpoints = 4;
-
- return w;
-}
-
-/*
-==================
-ClipWinding
-
-Clips the winding to the plane, returning the new winding on the positive side
-Frees the input winding.
-If keepon is true, an exactly on-plane winding will be saved, otherwise
-it will be clipped away.
-==================
-*/
-static winding_t *ClipWinding(winding_t *in, mplane_t *split, int keepon)
-{
- double dists[MAX_POINTS_ON_WINDING + 1];
- int sides[MAX_POINTS_ON_WINDING + 1];
- int counts[3];
- double dot;
- int i, j;
- double *p1, *p2;
- double mid[3];
- winding_t *neww;
- int maxpts;
-
- counts[SIDE_FRONT] = counts[SIDE_BACK] = counts[SIDE_ON] = 0;
-
- // determine sides for each point
- for (i = 0;i < in->numpoints;i++)
- {
- dists[i] = dot = DotProduct(in->points[i], split->normal) - split->dist;
- if (dot > ON_EPSILON)
- sides[i] = SIDE_FRONT;
- else if (dot < -ON_EPSILON)
- sides[i] = SIDE_BACK;
- else
- sides[i] = SIDE_ON;
- counts[sides[i]]++;
- }
- sides[i] = sides[0];
- dists[i] = dists[0];
-
- if (keepon && !counts[0] && !counts[1])
- return in;
-
- if (!counts[0])
- {
- FreeWinding(in);
- return NULL;
- }
- if (!counts[1])
- return in;
-
- maxpts = in->numpoints+4; // can't use counts[0]+2 because of fp grouping errors
- if (maxpts > MAX_POINTS_ON_WINDING)
- Sys_Error("ClipWinding: maxpts > MAX_POINTS_ON_WINDING");
-
- neww = NewWinding(maxpts);
-
- for (i = 0;i < in->numpoints;i++)
- {
- if (neww->numpoints >= maxpts)
- Sys_Error("ClipWinding: points exceeded estimate");
-
- p1 = in->points[i];
-
- if (sides[i] == SIDE_ON)
- {
- VectorCopy(p1, neww->points[neww->numpoints]);
- neww->numpoints++;
- continue;
- }
-
- if (sides[i] == SIDE_FRONT)
- {
- VectorCopy(p1, neww->points[neww->numpoints]);
- neww->numpoints++;
- }
-
- if (sides[i+1] == SIDE_ON || sides[i+1] == sides[i])
- continue;
-
- // generate a split point
- p2 = in->points[(i+1)%in->numpoints];
-
- dot = dists[i] / (dists[i]-dists[i+1]);
- for (j = 0;j < 3;j++)
- { // avoid round off error when possible
- if (split->normal[j] == 1)
- mid[j] = split->dist;
- else if (split->normal[j] == -1)
- mid[j] = -split->dist;
- else
- mid[j] = p1[j] + dot* (p2[j]-p1[j]);
- }
-
- VectorCopy(mid, neww->points[neww->numpoints]);
- neww->numpoints++;
- }
-
- // free the original winding
- FreeWinding(in);
-
- return neww;
-}
-
-
-/*
-==================
-DivideWinding
-
-Divides a winding by a plane, producing one or two windings. The
-original winding is not damaged or freed. If only on one side, the
-returned winding will be the input winding. If on both sides, two
-new windings will be created.
-==================
-*/
-static void DivideWinding(winding_t *in, mplane_t *split, winding_t **front, winding_t **back)
-{
- double dists[MAX_POINTS_ON_WINDING + 1];
- int sides[MAX_POINTS_ON_WINDING + 1];
- int counts[3];
- double dot;
- int i, j;
- double *p1, *p2;
- double mid[3];
- winding_t *f, *b;
- int maxpts;
-
- counts[SIDE_FRONT] = counts[SIDE_BACK] = counts[SIDE_ON] = 0;
-
- // determine sides for each point
- for (i = 0;i < in->numpoints;i++)
- {
- dot = DotProduct(in->points[i], split->normal);
- dot -= split->dist;
- dists[i] = dot;
- if (dot > ON_EPSILON) sides[i] = SIDE_FRONT;
- else if (dot < -ON_EPSILON) sides[i] = SIDE_BACK;
- else sides[i] = SIDE_ON;
- counts[sides[i]]++;
- }
- sides[i] = sides[0];
- dists[i] = dists[0];
-
- *front = *back = NULL;
-
- if (!counts[0])
- {
- *back = in;
- return;
- }
- if (!counts[1])
- {
- *front = in;
- return;
- }
-
- maxpts = in->numpoints+4; // can't use counts[0]+2 because of fp grouping errors
-
- if (maxpts > MAX_POINTS_ON_WINDING)
- Sys_Error("ClipWinding: maxpts > MAX_POINTS_ON_WINDING");
-
- *front = f = NewWinding(maxpts);
- *back = b = NewWinding(maxpts);
-
- for (i = 0;i < in->numpoints;i++)
- {
- if (f->numpoints >= maxpts || b->numpoints >= maxpts)
- Sys_Error("DivideWinding: points exceeded estimate");
-
- p1 = in->points[i];
-
- if (sides[i] == SIDE_ON)
- {
- VectorCopy(p1, f->points[f->numpoints]);
- f->numpoints++;
- VectorCopy(p1, b->points[b->numpoints]);
- b->numpoints++;
- continue;
- }
-
- if (sides[i] == SIDE_FRONT)
- {
- VectorCopy(p1, f->points[f->numpoints]);
- f->numpoints++;
- }
- else if (sides[i] == SIDE_BACK)
- {
- VectorCopy(p1, b->points[b->numpoints]);
- b->numpoints++;
- }
-
- if (sides[i+1] == SIDE_ON || sides[i+1] == sides[i])
- continue;
-
- // generate a split point
- p2 = in->points[(i+1)%in->numpoints];
-
- dot = dists[i] / (dists[i]-dists[i+1]);
- for (j = 0;j < 3;j++)
- { // avoid round off error when possible
- if (split->normal[j] == 1)
- mid[j] = split->dist;
- else if (split->normal[j] == -1)
- mid[j] = -split->dist;
- else
- mid[j] = p1[j] + dot* (p2[j]-p1[j]);
- }
-
- VectorCopy(mid, f->points[f->numpoints]);
- f->numpoints++;
- VectorCopy(mid, b->points[b->numpoints]);
- b->numpoints++;
- }
-}
-
typedef struct portal_s
{
mplane_t plane;
winding_t *w;
// recalculate bounding boxes for all leafs(because qbsp is very sloppy)
- leaf = loadmodel->brushq1.leafs;
- endleaf = leaf + loadmodel->brushq1.numleafs;
+ leaf = loadmodel->brushq1.data_leafs;
+ endleaf = leaf + loadmodel->brushq1.num_leafs;
for (;leaf < endleaf;leaf++)
{
VectorSet(leaf->mins, 2000000000, 2000000000, 2000000000);
loadmodel->brushq1.portalpoints = (void *)((qbyte *) loadmodel->brushq1.portals + numportals * sizeof(mportal_t));
loadmodel->brushq1.numportalpoints = numpoints;
// clear all leaf portal chains
- for (i = 0;i < loadmodel->brushq1.numleafs;i++)
- loadmodel->brushq1.leafs[i].portals = NULL;
+ for (i = 0;i < loadmodel->brushq1.num_leafs;i++)
+ loadmodel->brushq1.data_leafs[i].portals = NULL;
// process all portals in the global portal chain, while freeing them
portal = loadmodel->brushq1.portals;
point = loadmodel->brushq1.portalpoints;
// advance to next portal
portal++;
}
- FreeWinding(p->winding);
+ Winding_Free(p->winding);
}
FreePortal(p);
p = pnext;
// create the new portal by generating a polygon for the node plane,
// and clipping it by all of the other portals(which came from nodes above this one)
nodeportal = AllocPortal();
- nodeportal->plane = *node->plane;
+ nodeportal->plane = *plane;
- nodeportalwinding = BaseWindingForPlane(node->plane);
+ nodeportalwinding = Winding_NewFromPlane(nodeportal->plane.normal[0], nodeportal->plane.normal[1], nodeportal->plane.normal[2], nodeportal->plane.dist);
side = 0; // shut up compiler warning
for (portal = (portal_t *)node->portals;portal;portal = portal->next[side])
{
else
Host_Error("Mod_Q1BSP_RecursiveNodePortals: mislinked portal");
- nodeportalwinding = ClipWinding(nodeportalwinding, &clipplane, true);
+ nodeportalwinding = Winding_Clip(nodeportalwinding, clipplane.normal[0], clipplane.normal[1], clipplane.normal[2], clipplane.dist, true);
if (!nodeportalwinding)
{
Con_Printf("Mod_Q1BSP_RecursiveNodePortals: WARNING: new portal was clipped away\n");
RemovePortalFromNodes(portal);
// cut the portal into two portals, one on each side of the node plane
- DivideWinding(portal->winding, plane, &frontwinding, &backwinding);
+ Winding_Divide(portal->winding, plane->normal[0], plane->normal[1], plane->normal[2], plane->dist, &frontwinding, &backwinding);
if (!frontwinding)
{
*splitportal = *portal;
splitportal->chain = temp;
splitportal->winding = backwinding;
- FreeWinding(portal->winding);
+ Winding_Free(portal->winding);
portal->winding = frontwinding;
if (side == 0)
Mod_Q1BSP_RecursiveNodePortals(back);
}
-
static void Mod_Q1BSP_MakePortals(void)
{
portalchain = NULL;
}
}
+static void Mod_Q1BSP_FatPVS_RecursiveBSPNode(model_t *model, const vec3_t org, vec_t radius, qbyte *pvsbuffer, int pvsbytes, mnode_t *node)
+{
+ while (node->plane)
+ {
+ float d = PlaneDiff(org, node->plane);
+ if (d > radius)
+ node = node->children[0];
+ else if (d < -radius)
+ node = node->children[1];
+ else
+ {
+ // go down both sides
+ Mod_Q1BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, pvsbytes, node->children[0]);
+ node = node->children[1];
+ }
+ }
+ // if this leaf is in a cluster, accumulate the pvs bits
+ if (((mleaf_t *)node)->clusterindex >= 0)
+ {
+ int i;
+ qbyte *pvs = model->brushq1.data_pvsclusters + ((mleaf_t *)node)->clusterindex * model->brushq1.num_pvsclusterbytes;
+ for (i = 0;i < pvsbytes;i++)
+ pvsbuffer[i] |= pvs[i];
+ }
+}
+
+//Calculates a PVS that is the inclusive or of all leafs within radius pixels
+//of the given point.
+static int Mod_Q1BSP_FatPVS(model_t *model, const vec3_t org, vec_t radius, qbyte *pvsbuffer, int pvsbufferlength)
+{
+ int bytes = ((model->brushq1.num_leafs - 1) + 7) >> 3;
+ bytes = min(bytes, pvsbufferlength);
+ if (r_novis.integer)
+ {
+ memset(pvsbuffer, 0xFF, bytes);
+ return bytes;
+ }
+ memset(pvsbuffer, 0, bytes);
+ Mod_Q1BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, bytes, model->brushq1.nodes);
+ return bytes;
+}
+
+//Returns PVS data for a given point
+//(note: can return NULL)
+static qbyte *Mod_Q1BSP_GetPVS(model_t *model, const vec3_t p)
+{
+ mnode_t *node;
+ Mod_CheckLoaded(model);
+ node = model->brushq1.nodes;
+ while (node->plane)
+ node = node->children[(node->plane->type < 3 ? p[node->plane->type] : DotProduct(p,node->plane->normal)) < node->plane->dist];
+ if (((mleaf_t *)node)->clusterindex >= 0)
+ return model->brushq1.data_pvsclusters + ((mleaf_t *)node)->clusterindex * model->brushq1.num_pvsclusterbytes;
+ else
+ return NULL;
+}
+
+static void Mod_Q1BSP_RoundUpToHullSize(model_t *cmodel, const vec3_t inmins, const vec3_t inmaxs, vec3_t outmins, vec3_t outmaxs)
+{
+ vec3_t size;
+ const hull_t *hull;
+
+ VectorSubtract(inmaxs, inmins, size);
+ if (cmodel->brush.ishlbsp)
+ {
+ if (size[0] < 3)
+ hull = &cmodel->brushq1.hulls[0]; // 0x0x0
+ else if (size[0] <= 32)
+ {
+ if (size[2] < 54) // pick the nearest of 36 or 72
+ hull = &cmodel->brushq1.hulls[3]; // 32x32x36
+ else
+ hull = &cmodel->brushq1.hulls[1]; // 32x32x72
+ }
+ else
+ hull = &cmodel->brushq1.hulls[2]; // 64x64x64
+ }
+ else
+ {
+ if (size[0] < 3)
+ hull = &cmodel->brushq1.hulls[0]; // 0x0x0
+ else if (size[0] <= 32)
+ hull = &cmodel->brushq1.hulls[1]; // 32x32x56
+ else
+ hull = &cmodel->brushq1.hulls[2]; // 64x64x88
+ }
+ VectorCopy(inmins, outmins);
+ VectorAdd(inmins, hull->clip_size, outmaxs);
+}
+
extern void R_Model_Brush_DrawSky(entity_render_t *ent);
extern void R_Model_Brush_Draw(entity_render_t *ent);
extern void R_Model_Brush_DrawShadowVolume(entity_render_t *ent, vec3_t relativelightorigin, float lightradius);
-extern void R_Model_Brush_DrawLight(entity_render_t *ent, vec3_t relativelightorigin, vec3_t relativeeyeorigin, float lightradius, float *lightcolor, const matrix4x4_t *matrix_modeltofilter, const matrix4x4_t *matrix_modeltoattenuationxyz, const matrix4x4_t *matrix_modeltoattenuationz);
+extern void R_Model_Brush_DrawLight(entity_render_t *ent, vec3_t relativelightorigin, vec3_t relativeeyeorigin, float lightradius, float *lightcolor, const matrix4x4_t *matrix_modeltolight, const matrix4x4_t *matrix_modeltoattenuationxyz, const matrix4x4_t *matrix_modeltoattenuationz, rtexture_t *lightcubemap);
void Mod_Q1BSP_Load(model_t *mod, void *buffer)
{
int i, j, k;
model_t *originalloadmodel;
float dist, modelyawradius, modelradius, *vec;
msurface_t *surf;
- surfmesh_t *mesh;
mod->type = mod_brush;
i = LittleLong(header->version);
if (i != BSPVERSION && i != 30)
Host_Error("Mod_Q1BSP_Load: %s has wrong version number(%i should be %i(Quake) or 30(HalfLife))", mod->name, i, BSPVERSION);
- mod->brushq1.ishlbsp = i == 30;
-
- mod->brushq1.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.ishlbsp = i == 30;
+
+ mod->soundfromcenter = true;
+ mod->TraceBox = Mod_Q1BSP_TraceBox;
+ mod->brush.SuperContentsFromNativeContents = Mod_Q1BSP_SuperContentsFromNativeContents;
+ mod->brush.NativeContentsFromSuperContents = Mod_Q1BSP_NativeContentsFromSuperContents;
+ mod->brush.GetPVS = Mod_Q1BSP_GetPVS;
+ mod->brush.FatPVS = Mod_Q1BSP_FatPVS;
+ mod->brush.BoxTouchingPVS = Mod_Q1BSP_BoxTouchingPVS;
+ mod->brush.LightPoint = Mod_Q1BSP_LightPoint;
+ mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.AmbientSoundLevelsForPoint = Mod_Q1BSP_AmbientSoundLevelsForPoint;
+ mod->brush.RoundUpToHullSize = Mod_Q1BSP_RoundUpToHullSize;
mod->brushq1.PointInLeaf = Mod_Q1BSP_PointInLeaf;
- mod->brushq1.PointContents = Mod_Q1BSP_PointContents;
- mod->brushq1.LeafPVS = Mod_Q1BSP_LeafPVS;
mod->brushq1.BuildPVSTextureChains = Mod_Q1BSP_BuildPVSTextureChains;
if (loadmodel->isworldmodel)
{
- Cvar_SetValue("halflifebsp", mod->brushq1.ishlbsp);
+ Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
// until we get a texture for it...
R_ResetQuakeSky();
}
Mod_Q1BSP_LoadFaces(&header->lumps[LUMP_FACES]);
Mod_Q1BSP_LoadMarksurfaces(&header->lumps[LUMP_MARKSURFACES]);
Mod_Q1BSP_LoadVisibility(&header->lumps[LUMP_VISIBILITY]);
+ // load submodels before leafs because they contain the number of vis leafs
+ Mod_Q1BSP_LoadSubmodels(&header->lumps[LUMP_MODELS]);
Mod_Q1BSP_LoadLeafs(&header->lumps[LUMP_LEAFS]);
Mod_Q1BSP_LoadNodes(&header->lumps[LUMP_NODES]);
Mod_Q1BSP_LoadClipnodes(&header->lumps[LUMP_CLIPNODES]);
- Mod_Q1BSP_LoadSubmodels(&header->lumps[LUMP_MODELS]);
+
+ if (mod->brushq1.data_compressedpvs)
+ Mem_Free(mod->brushq1.data_compressedpvs);
+ mod->brushq1.data_compressedpvs = NULL;
+ mod->brushq1.num_compressedpvs = 0;
Mod_Q1BSP_MakeHull0();
Mod_Q1BSP_MakePortals();
//
// set up the submodels(FIXME: this is confusing)
//
- for (i = 0;i < mod->brushq1.numsubmodels;i++)
+ for (i = 0;i < mod->brush.numsubmodels;i++)
{
bm = &mod->brushq1.submodels[i];
// this gets altered below if sky is used
mod->DrawSky = NULL;
mod->Draw = R_Model_Brush_Draw;
- mod->DrawFakeShadow = NULL;
mod->DrawShadowVolume = R_Model_Brush_DrawShadowVolume;
mod->DrawLight = R_Model_Brush_DrawLight;
+ if (i != 0)
+ {
+ mod->brush.GetPVS = NULL;
+ mod->brush.FatPVS = NULL;
+ mod->brush.BoxTouchingPVS = NULL;
+ mod->brush.LightPoint = NULL;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
+ }
mod->brushq1.pvstexturechains = Mem_Alloc(originalloadmodel->mempool, mod->brushq1.numtextures * sizeof(msurface_t **));
mod->brushq1.pvstexturechainsbuffer = Mem_Alloc(originalloadmodel->mempool,(mod->brushq1.nummodelsurfaces + mod->brushq1.numtextures) * sizeof(msurface_t *));
mod->brushq1.pvstexturechainslength = Mem_Alloc(originalloadmodel->mempool, mod->brushq1.numtextures * sizeof(int));
if (surf->texinfo->texture->shader == &Cshader_sky)
mod->DrawSky = R_Model_Brush_DrawSky;
// LordHavoc: submodels always clip, even if water
- if (mod->brushq1.numsubmodels - 1)
+ if (mod->brush.numsubmodels - 1)
surf->flags |= SURF_SOLIDCLIP;
// calculate bounding shapes
- for (mesh = surf->mesh;mesh;mesh = mesh->chain)
+ for (k = 0, vec = surf->mesh.data_vertex3f;k < surf->mesh.num_vertices;k++, vec += 3)
{
- for (k = 0, vec = mesh->vertex3f;k < mesh->numverts;k++, vec += 3)
- {
- if (mod->normalmins[0] > vec[0]) mod->normalmins[0] = vec[0];
- if (mod->normalmins[1] > vec[1]) mod->normalmins[1] = vec[1];
- if (mod->normalmins[2] > vec[2]) mod->normalmins[2] = vec[2];
- if (mod->normalmaxs[0] < vec[0]) mod->normalmaxs[0] = vec[0];
- if (mod->normalmaxs[1] < vec[1]) mod->normalmaxs[1] = vec[1];
- if (mod->normalmaxs[2] < vec[2]) mod->normalmaxs[2] = vec[2];
- dist = vec[0]*vec[0]+vec[1]*vec[1];
- if (modelyawradius < dist)
- modelyawradius = dist;
- dist += vec[2]*vec[2];
- if (modelradius < dist)
- modelradius = dist;
- }
+ if (mod->normalmins[0] > vec[0]) mod->normalmins[0] = vec[0];
+ if (mod->normalmins[1] > vec[1]) mod->normalmins[1] = vec[1];
+ if (mod->normalmins[2] > vec[2]) mod->normalmins[2] = vec[2];
+ if (mod->normalmaxs[0] < vec[0]) mod->normalmaxs[0] = vec[0];
+ if (mod->normalmaxs[1] < vec[1]) mod->normalmaxs[1] = vec[1];
+ if (mod->normalmaxs[2] < vec[2]) mod->normalmaxs[2] = vec[2];
+ dist = vec[0]*vec[0]+vec[1]*vec[1];
+ if (modelyawradius < dist)
+ modelyawradius = dist;
+ dist += vec[2]*vec[2];
+ if (modelradius < dist)
+ modelradius = dist;
}
}
modelyawradius = sqrt(modelyawradius);
}
Mod_Q1BSP_BuildSurfaceNeighbors(mod->brushq1.surfaces + mod->brushq1.firstmodelsurface, mod->brushq1.nummodelsurfaces, originalloadmodel->mempool);
- mod->brushq1.numleafs = bm->visleafs;
+ mod->brushq1.num_visleafs = bm->visleafs;
// LordHavoc: only register submodels if it is the world
// (prevents bsp models from replacing world submodels)
- if (loadmodel->isworldmodel && i < (mod->brushq1.numsubmodels - 1))
+ if (loadmodel->isworldmodel && i < (mod->brush.numsubmodels - 1))
{
char name[10];
// duplicate the basic information
loadmodel = originalloadmodel;
//Mod_Q1BSP_ProcessLightList();
+
+ if (developer.integer)
+ Con_Printf("Some stats for q1bsp model \"%s\": %i faces, %i nodes, %i leafs, %i visleafs, %i visleafportals\n", loadmodel->name, loadmodel->brushq1.numsurfaces, loadmodel->brushq1.numnodes, loadmodel->brushq1.num_leafs, loadmodel->brushq1.num_visleafs, loadmodel->brushq1.numportals);
}
static void Mod_Q2BSP_LoadEntities(lump_t *l)
*/
}
-void Mod_Q2BSP_Load(model_t *mod, void *buffer)
+void static Mod_Q2BSP_Load(model_t *mod, void *buffer)
{
int i;
q2dheader_t *header;
i = LittleLong(header->version);
if (i != Q2BSPVERSION)
Host_Error("Mod_Q2BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q2BSPVERSION);
- mod->brushq1.ishlbsp = false;
+ mod->brush.ishlbsp = false;
if (loadmodel->isworldmodel)
{
- Cvar_SetValue("halflifebsp", mod->brushq1.ishlbsp);
+ Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
// until we get a texture for it...
R_ResetQuakeSky();
}
Mod_Q2BSP_LoadModels(&header->lumps[Q2LUMP_MODELS]);
}
+static int Mod_Q3BSP_SuperContentsFromNativeContents(model_t *model, int nativecontents);
+static int Mod_Q3BSP_NativeContentsFromSuperContents(model_t *model, int supercontents);
static void Mod_Q3BSP_LoadEntities(lump_t *l)
{
memcpy(loadmodel->brush.entities, mod_base + l->fileofs, l->filelen);
data = loadmodel->brush.entities;
// some Q3 maps override the lightgrid_cellsize with a worldspawn key
- if (data && COM_ParseToken(&data) && com_token[0] == '{')
+ if (data && COM_ParseToken(&data, false) && com_token[0] == '{')
{
while (1)
{
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
break; // error
if (com_token[0] == '}')
break; // end of worldspawn
strcpy(key, com_token);
while (key[strlen(key)-1] == ' ') // remove trailing spaces
key[strlen(key)-1] = 0;
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
break; // error
strcpy(value, com_token);
if (!strcmp("gridsize", key))
q3dtexture_t *in;
q3mtexture_t *out;
int i, count;
+ int j, c;
+ fssearch_t *search;
+ char *f;
+ const char *text;
+ int flags;
+ char shadername[Q3PATHLENGTH];
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
for (i = 0;i < count;i++, in++, out++)
{
- strncpy(out->name, in->name, sizeof(out->name) - 1);
- out->surfaceflags = LittleLong(in->surfaceflags);
- out->contents = LittleLong(in->contents);
-
out->number = i;
+ strlcpy (out->name, in->name, sizeof (out->name));
+ out->surfaceflags = LittleLong(in->surfaceflags);
+ out->nativecontents = LittleLong(in->contents);
+ out->supercontents = Mod_Q3BSP_SuperContentsFromNativeContents(loadmodel, out->nativecontents);
Mod_LoadSkinFrame(&out->skin, out->name, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE, false, true, true);
+ out->surfaceparms = -1;
+ }
+
+ // do a quick parse of shader files to get surfaceparms
+ if ((search = FS_Search("scripts/*.shader", true, false)))
+ {
+ for (i = 0;i < search->numfilenames;i++)
+ {
+ if ((f = FS_LoadFile(search->filenames[i], false)))
+ {
+ text = f;
+ while (COM_ParseToken(&text, false))
+ {
+ snprintf(shadername, sizeof(shadername), "%s", com_token);
+ flags = 0;
+ if (COM_ParseToken(&text, false) && !strcasecmp(com_token, "{"))
+ {
+ while (COM_ParseToken(&text, false))
+ {
+ if (!strcasecmp(com_token, "}"))
+ break;
+ else if (!strcasecmp(com_token, "{"))
+ {
+ while (COM_ParseToken(&text, false))
+ {
+ if (!strcasecmp(com_token, "}"))
+ break;
+ }
+ }
+ else if (!strcasecmp(com_token, "surfaceparm"))
+ {
+ if (COM_ParseToken(&text, true) && strcasecmp(com_token, "\n"))
+ {
+ if (!strcasecmp(com_token, "alphashadow"))
+ flags |= Q3SURFACEPARM_ALPHASHADOW;
+ else if (!strcasecmp(com_token, "areaportal"))
+ flags |= Q3SURFACEPARM_AREAPORTAL;
+ else if (!strcasecmp(com_token, "clusterportal"))
+ flags |= Q3SURFACEPARM_CLUSTERPORTAL;
+ else if (!strcasecmp(com_token, "detail"))
+ flags |= Q3SURFACEPARM_DETAIL;
+ else if (!strcasecmp(com_token, "donotenter"))
+ flags |= Q3SURFACEPARM_DONOTENTER;
+ else if (!strcasecmp(com_token, "fog"))
+ flags |= Q3SURFACEPARM_FOG;
+ else if (!strcasecmp(com_token, "lava"))
+ flags |= Q3SURFACEPARM_LAVA;
+ else if (!strcasecmp(com_token, "lightfilter"))
+ flags |= Q3SURFACEPARM_LIGHTFILTER;
+ else if (!strcasecmp(com_token, "metalsteps"))
+ flags |= Q3SURFACEPARM_METALSTEPS;
+ else if (!strcasecmp(com_token, "nodamage"))
+ flags |= Q3SURFACEPARM_NODAMAGE;
+ else if (!strcasecmp(com_token, "nodlight"))
+ flags |= Q3SURFACEPARM_NODLIGHT;
+ else if (!strcasecmp(com_token, "nodraw"))
+ flags |= Q3SURFACEPARM_NODRAW;
+ else if (!strcasecmp(com_token, "nodrop"))
+ flags |= Q3SURFACEPARM_NODROP;
+ else if (!strcasecmp(com_token, "noimpact"))
+ flags |= Q3SURFACEPARM_NOIMPACT;
+ else if (!strcasecmp(com_token, "nolightmap"))
+ flags |= Q3SURFACEPARM_NOLIGHTMAP;
+ else if (!strcasecmp(com_token, "nomarks"))
+ flags |= Q3SURFACEPARM_NOMARKS;
+ else if (!strcasecmp(com_token, "nomipmaps"))
+ flags |= Q3SURFACEPARM_NOMIPMAPS;
+ else if (!strcasecmp(com_token, "nonsolid"))
+ flags |= Q3SURFACEPARM_NONSOLID;
+ else if (!strcasecmp(com_token, "origin"))
+ flags |= Q3SURFACEPARM_ORIGIN;
+ else if (!strcasecmp(com_token, "playerclip"))
+ flags |= Q3SURFACEPARM_PLAYERCLIP;
+ else if (!strcasecmp(com_token, "sky"))
+ flags |= Q3SURFACEPARM_SKY;
+ else if (!strcasecmp(com_token, "slick"))
+ flags |= Q3SURFACEPARM_SLICK;
+ else if (!strcasecmp(com_token, "slime"))
+ flags |= Q3SURFACEPARM_SLIME;
+ else if (!strcasecmp(com_token, "structural"))
+ flags |= Q3SURFACEPARM_STRUCTURAL;
+ else if (!strcasecmp(com_token, "trans"))
+ flags |= Q3SURFACEPARM_TRANS;
+ else if (!strcasecmp(com_token, "water"))
+ flags |= Q3SURFACEPARM_WATER;
+ else
+ Con_Printf("%s parsing warning: unknown surfaceparm \"%s\"\n", search->filenames[i], com_token);
+ if (!COM_ParseToken(&text, true) || strcasecmp(com_token, "\n"))
+ {
+ Con_Printf("%s parsing error: surfaceparm only takes one parameter.\n", search->filenames[i]);
+ goto parseerror;
+ }
+ }
+ else
+ {
+ Con_Printf("%s parsing error: surfaceparm expects a parameter.\n", search->filenames[i]);
+ goto parseerror;
+ }
+ }
+ else
+ {
+ // look for linebreak or }
+ while(COM_ParseToken(&text, true) && strcasecmp(com_token, "\n") && strcasecmp(com_token, "}"));
+ // break out to top level if it was }
+ if (!strcasecmp(com_token, "}"))
+ break;
+ }
+ }
+ // add shader to list (shadername and flags)
+ // actually here we just poke into the texture settings
+ for (j = 0, out = loadmodel->brushq3.data_textures;j < loadmodel->brushq3.num_textures;j++, out++)
+ if (!strcasecmp(out->name, shadername))
+ out->surfaceparms = flags;
+ }
+ else
+ {
+ Con_Printf("%s parsing error - expected \"{\", found \"%s\"\n", search->filenames[i], com_token);
+ goto parseerror;
+ }
+ }
+parseerror:
+ Mem_Free(f);
+ }
+ }
+ }
+
+ c = 0;
+ for (j = 0, out = loadmodel->brushq3.data_textures;j < loadmodel->brushq3.num_textures;j++, out++)
+ {
+ if (out->surfaceparms == -1)
+ {
+ c++;
+ Con_DPrintf("%s: No shader found for texture \"%s\"\n", loadmodel->name, out->name);
+ out->surfaceparms = 0;
+ // these are defaults
+ if (!strcmp(out->name, "caulk") || !strcmp(out->name, "common/caulk") || !strcmp(out->name, "textures/common/caulk")
+ || !strcmp(out->name, "nodraw") || !strcmp(out->name, "common/nodraw") || !strcmp(out->name, "textures/common/nodraw"))
+ out->surfaceparms |= Q3SURFACEPARM_NODRAW;
+ if (!strncmp(out->name, "textures/skies/", 15))
+ out->surfaceparms |= Q3SURFACEPARM_SKY;
+ if (R_TextureHasAlpha(out->skin.base))
+ out->surfaceparms |= Q3SURFACEPARM_TRANS;
+ }
}
+ Con_DPrintf("%s: %i textures missing shaders\n", loadmodel->name, c);
}
static void Mod_Q3BSP_LoadPlanes(lump_t *l)
{
q3dbrush_t *in;
q3mbrush_t *out;
- int i, n, c, count;
+ int i, j, n, c, count, maxplanes;
+ mplane_t *planes;
+ winding_t *temp1, *temp2;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
loadmodel->brushq3.data_brushes = out;
loadmodel->brushq3.num_brushes = count;
- for (i = 0;i < count;i++, in++, out++)
+ temp1 = Winding_New(64);
+ temp2 = Winding_New(64);
+
+ maxplanes = 0;
+ planes = NULL;
+
+ for (i = 0;i < count;i++, in++, out++)
{
n = LittleLong(in->firstbrushside);
c = LittleLong(in->numbrushsides);
if (n < 0 || n >= loadmodel->brushq3.num_textures)
Host_Error("Mod_Q3BSP_LoadBrushes: invalid textureindex %i (%i textures)\n", n, loadmodel->brushq3.num_textures);
out->texture = loadmodel->brushq3.data_textures + n;
+
+ // make a list of mplane_t structs to construct a colbrush from
+ if (maxplanes < out->numbrushsides)
+ {
+ maxplanes = out->numbrushsides;
+ if (planes)
+ Mem_Free(planes);
+ planes = Mem_Alloc(tempmempool, sizeof(mplane_t) * maxplanes);
+ }
+ for (j = 0;j < out->numbrushsides;j++)
+ {
+ VectorCopy(out->firstbrushside[j].plane->normal, planes[j].normal);
+ planes[j].dist = out->firstbrushside[j].plane->dist;
+ }
+ // make the colbrush from the planes
+ out->colbrushf = Collision_NewBrushFromPlanes(loadmodel->mempool, out->numbrushsides, planes, out->texture->supercontents, temp1, temp2);
}
+ if (planes)
+ Mem_Free(planes);
+ Winding_Free(temp1);
+ Winding_Free(temp2);
}
static void Mod_Q3BSP_LoadEffects(lump_t *l)
for (i = 0;i < count;i++, in++, out++)
{
- strncpy(out->shadername, in->shadername, sizeof(out->shadername) - 1);
+ strlcpy (out->shadername, in->shadername, sizeof (out->shadername));
n = LittleLong(in->brushindex);
if (n < 0 || n >= loadmodel->brushq3.num_brushes)
Host_Error("Mod_Q3BSP_LoadEffects: invalid brushindex %i (%i brushes)\n", n, loadmodel->brushq3.num_brushes);
if (l->filelen % sizeof(*in))
Host_Error("Mod_Q3BSP_LoadVertices: funny lump size in %s",loadmodel->name);
loadmodel->brushq3.num_vertices = count = l->filelen / sizeof(*in);
- loadmodel->brushq3.data_vertex3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_texturetexcoord2f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[2]));
- loadmodel->brushq3.data_lightmaptexcoord2f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[2]));
- loadmodel->brushq3.data_svector3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_tvector3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_normal3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_color4f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[4]));
+ loadmodel->brushq3.data_vertex3f = Mem_Alloc(loadmodel->mempool, count * (sizeof(float) * (3 + 2 + 2 + 3 + 3 + 3 + 4)));
+ loadmodel->brushq3.data_texcoordtexture2f = loadmodel->brushq3.data_vertex3f + count * 3;
+ loadmodel->brushq3.data_texcoordlightmap2f = loadmodel->brushq3.data_texcoordtexture2f + count * 2;
+ loadmodel->brushq3.data_svector3f = loadmodel->brushq3.data_texcoordlightmap2f + count * 2;
+ loadmodel->brushq3.data_tvector3f = loadmodel->brushq3.data_svector3f + count * 3;
+ loadmodel->brushq3.data_normal3f = loadmodel->brushq3.data_tvector3f + count * 3;
+ loadmodel->brushq3.data_color4f = loadmodel->brushq3.data_normal3f + count * 3;
for (i = 0;i < count;i++, in++)
{
loadmodel->brushq3.data_vertex3f[i * 3 + 0] = LittleFloat(in->origin3f[0]);
loadmodel->brushq3.data_vertex3f[i * 3 + 1] = LittleFloat(in->origin3f[1]);
loadmodel->brushq3.data_vertex3f[i * 3 + 2] = LittleFloat(in->origin3f[2]);
- loadmodel->brushq3.data_texturetexcoord2f[i * 2 + 0] = LittleFloat(in->texcoord2f[0]);
- loadmodel->brushq3.data_texturetexcoord2f[i * 2 + 1] = LittleFloat(in->texcoord2f[1]);
- loadmodel->brushq3.data_lightmaptexcoord2f[i * 2 + 0] = LittleFloat(in->lightmap2f[0]);
- loadmodel->brushq3.data_lightmaptexcoord2f[i * 2 + 1] = LittleFloat(in->lightmap2f[1]);
+ loadmodel->brushq3.data_texcoordtexture2f[i * 2 + 0] = LittleFloat(in->texcoord2f[0]);
+ loadmodel->brushq3.data_texcoordtexture2f[i * 2 + 1] = LittleFloat(in->texcoord2f[1]);
+ loadmodel->brushq3.data_texcoordlightmap2f[i * 2 + 0] = LittleFloat(in->lightmap2f[0]);
+ loadmodel->brushq3.data_texcoordlightmap2f[i * 2 + 1] = LittleFloat(in->lightmap2f[1]);
// svector/tvector are calculated later in face loading
loadmodel->brushq3.data_svector3f[i * 3 + 0] = 0;
loadmodel->brushq3.data_svector3f[i * 3 + 1] = 0;
if (l->filelen % sizeof(int[3]))
Host_Error("Mod_Q3BSP_LoadTriangles: funny lump size in %s",loadmodel->name);
count = l->filelen / sizeof(*in);
- out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
+ out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out) * 2);
loadmodel->brushq3.num_triangles = count / 3;
loadmodel->brushq3.data_element3i = out;
- loadmodel->brushq3.data_neighbor3i = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
+ loadmodel->brushq3.data_neighbor3i = out + count;
for (i = 0;i < count;i++, in++, out++)
{
*out = LittleLong(*in);
if (*out < 0 || *out >= loadmodel->brushq3.num_vertices)
- Host_Error("Mod_Q3BSP_LoadTriangles: invalid vertexindex %i (%i vertices)\n", *out, loadmodel->brushq3.num_vertices);
+ {
+ Con_Printf("Mod_Q3BSP_LoadTriangles: invalid vertexindex %i (%i vertices), setting to 0\n", *out, loadmodel->brushq3.num_vertices);
+ *out = 0;
+ }
}
}
rtexture_t **out;
int i, count;
+ if (!l->filelen)
+ return;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
Host_Error("Mod_Q3BSP_LoadLightmaps: funny lump size in %s",loadmodel->name);
{
q3dface_t *in;
q3mface_t *out;
- int i, j, n, count, invalidelements, patchsize[2];
+ int i, j, n, count, invalidelements, patchsize[2], finalwidth, finalheight, xlevel, ylevel, row0, row1, x, y, *e, finalvertices, finaltriangles;
+ //int *originalelement3i;
+ //int *originalneighbor3i;
+ float *originalvertex3f;
+ //float *originalsvector3f;
+ //float *originaltvector3f;
+ //float *originalnormal3f;
+ float *originalcolor4f;
+ float *originaltexcoordtexture2f;
+ float *originaltexcoordlightmap2f;
+ float *v;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
&& out->type != Q3FACETYPE_MESH
&& out->type != Q3FACETYPE_FLARE)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i: unknown face type %i\n", i, n);
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i: unknown face type %i\n", i, out->type);
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0; // error
continue;
}
n = LittleLong(in->textureindex);
if (n < 0 || n >= loadmodel->brushq3.num_textures)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i: invalid textureindex %i (%i textures)\n", i, n, loadmodel->brushq3.num_textures);
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i: invalid textureindex %i (%i textures)\n", i, n, loadmodel->brushq3.num_textures);
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0; // error
continue;
n = 0;
n = LittleLong(in->effectindex);
if (n < -1 || n >= loadmodel->brushq3.num_effects)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid effectindex %i (%i effects)\n", i, out->texture->name, n, loadmodel->brushq3.num_effects);
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid effectindex %i (%i effects)\n", i, out->texture->name, n, loadmodel->brushq3.num_effects);
n = -1;
}
if (n == -1)
n = LittleLong(in->lightmapindex);
if (n < -1 || n >= loadmodel->brushq3.num_lightmaps)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid lightmapindex %i (%i lightmaps)\n", i, out->texture->name, n, loadmodel->brushq3.num_lightmaps);
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid lightmapindex %i (%i lightmaps)\n", i, out->texture->name, n, loadmodel->brushq3.num_lightmaps);
n = -1;
}
if (n == -1)
out->lightmaptexture = loadmodel->brushq3.data_lightmaps[n];
out->firstvertex = LittleLong(in->firstvertex);
- out->numvertices = LittleLong(in->numvertices);
+ out->num_vertices = LittleLong(in->numvertices);
out->firstelement = LittleLong(in->firstelement);
- out->numelements = LittleLong(in->numelements);
- out->numtriangles = out->numelements / 3;
- if (out->firstvertex < 0 || out->firstvertex + out->numvertices > loadmodel->brushq3.num_vertices)
+ out->num_triangles = LittleLong(in->numelements) / 3;
+ if (out->num_triangles * 3 != LittleLong(in->numelements))
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid vertex range %i : %i (%i vertices)\n", i, out->texture->name, out->firstvertex, out->firstvertex + out->numvertices, loadmodel->brushq3.num_vertices);
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): numelements %i is not a multiple of 3\n", i, out->texture->name, LittleLong(in->numelements));
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0; // error
continue;
}
- if (out->firstelement < 0 || out->firstelement + out->numelements > loadmodel->brushq3.num_triangles * 3)
+ if (out->firstvertex < 0 || out->firstvertex + out->num_vertices > loadmodel->brushq3.num_vertices)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid element range %i : %i (%i elements)\n", i, out->texture->name, out->firstelement, out->firstelement + out->numelements, loadmodel->brushq3.num_triangles * 3);
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid vertex range %i : %i (%i vertices)\n", i, out->texture->name, out->firstvertex, out->firstvertex + out->num_vertices, loadmodel->brushq3.num_vertices);
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0; // error
continue;
}
- if (out->numtriangles * 3 != out->numelements)
+ if (out->firstelement < 0 || out->firstelement + out->num_triangles * 3 > loadmodel->brushq3.num_triangles * 3)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): numelements %i is not a multiple of 3\n", i, out->texture->name, out->numelements);
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid element range %i : %i (%i elements)\n", i, out->texture->name, out->firstelement, out->firstelement + out->num_triangles * 3, loadmodel->brushq3.num_triangles * 3);
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0; // error
continue;
}
{
case Q3FACETYPE_POLYGON:
case Q3FACETYPE_MESH:
+ // no processing necessary
out->data_vertex3f = loadmodel->brushq3.data_vertex3f + out->firstvertex * 3;
- out->data_texturetexcoord2f = loadmodel->brushq3.data_texturetexcoord2f + out->firstvertex * 2;
- out->data_lightmaptexcoord2f = loadmodel->brushq3.data_lightmaptexcoord2f + out->firstvertex * 2;
+ out->data_texcoordtexture2f = loadmodel->brushq3.data_texcoordtexture2f + out->firstvertex * 2;
+ out->data_texcoordlightmap2f = loadmodel->brushq3.data_texcoordlightmap2f + out->firstvertex * 2;
out->data_svector3f = loadmodel->brushq3.data_svector3f + out->firstvertex * 3;
out->data_tvector3f = loadmodel->brushq3.data_tvector3f + out->firstvertex * 3;
out->data_normal3f = loadmodel->brushq3.data_normal3f + out->firstvertex * 3;
if (patchsize[0] < 1 || patchsize[1] < 1)
{
Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid patchsize %ix%i\n", i, out->texture->name, patchsize[0], patchsize[1]);
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0; // error
continue;
}
- // FIXME: convert patch to triangles here!
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_PATCH not supported (yet)\n", i, out->texture->name);
- out->type = 0;
- continue;
+ // convert patch to Q3FACETYPE_MESH
+ xlevel = mod_q3bsp_curves_subdivide_level.integer;
+ ylevel = mod_q3bsp_curves_subdivide_level.integer;
+ finalwidth = ((patchsize[0] - 1) << xlevel) + 1;
+ finalheight = ((patchsize[1] - 1) << ylevel) + 1;
+ finalvertices = finalwidth * finalheight;
+ finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+ originalvertex3f = loadmodel->brushq3.data_vertex3f + out->firstvertex * 3;
+ //originalsvector3f = loadmodel->brushq3.data_svector3f + out->firstvertex * 3;
+ //originaltvector3f = loadmodel->brushq3.data_tvector3f + out->firstvertex * 3;
+ //originalnormal3f = loadmodel->brushq3.data_normal3f + out->firstvertex * 3;
+ originaltexcoordtexture2f = loadmodel->brushq3.data_texcoordtexture2f + out->firstvertex * 2;
+ originaltexcoordlightmap2f = loadmodel->brushq3.data_texcoordlightmap2f + out->firstvertex * 2;
+ originalcolor4f = loadmodel->brushq3.data_color4f + out->firstvertex * 4;
+ //originalelement3i = loadmodel->brushq3.data_element3i + out->firstelement;
+ //originalneighbor3i = loadmodel->brushq3.data_neighbor3i + out->firstelement;
+ /*
+ originalvertex3f = out->data_vertex3f;
+ //originalsvector3f = out->data_svector3f;
+ //originaltvector3f = out->data_tvector3f;
+ //originalnormal3f = out->data_normal3f;
+ originalcolor4f = out->data_color4f;
+ originaltexcoordtexture2f = out->data_texcoordtexture2f;
+ originaltexcoordlightmap2f = out->data_texcoordlightmap2f;
+ //originalelement3i = out->data_element3i;
+ //originalneighbor3i = out->data_neighbor3i;
+ */
+ out->data_vertex3f = Mem_Alloc(loadmodel->mempool, sizeof(float[20]) * finalvertices);
+ out->data_svector3f = out->data_vertex3f + finalvertices * 3;
+ out->data_tvector3f = out->data_svector3f + finalvertices * 3;
+ out->data_normal3f = out->data_tvector3f + finalvertices * 3;
+ out->data_color4f = out->data_normal3f + finalvertices * 3;
+ out->data_texcoordtexture2f = out->data_color4f + finalvertices * 4;
+ out->data_texcoordlightmap2f = out->data_texcoordtexture2f + finalvertices * 2;
+ out->data_element3i = Mem_Alloc(loadmodel->mempool, sizeof(int[6]) * finaltriangles);
+ out->data_neighbor3i = out->data_element3i + finaltriangles * 3;
+ out->type = Q3FACETYPE_MESH;
+ out->firstvertex = -1;
+ out->num_vertices = finalvertices;
+ out->firstelement = -1;
+ out->num_triangles = finaltriangles;
+ // generate geometry
+ // (note: normals are skipped because they get recalculated)
+ QuadraticSplinePatchSubdivideFloatBuffer(patchsize[0], patchsize[1], xlevel, ylevel, 3, originalvertex3f, out->data_vertex3f);
+ QuadraticSplinePatchSubdivideFloatBuffer(patchsize[0], patchsize[1], xlevel, ylevel, 2, originaltexcoordtexture2f, out->data_texcoordtexture2f);
+ QuadraticSplinePatchSubdivideFloatBuffer(patchsize[0], patchsize[1], xlevel, ylevel, 2, originaltexcoordlightmap2f, out->data_texcoordlightmap2f);
+ QuadraticSplinePatchSubdivideFloatBuffer(patchsize[0], patchsize[1], xlevel, ylevel, 4, originalcolor4f, out->data_color4f);
+ // generate elements
+ e = out->data_element3i;
+ for (y = 0;y < finalheight - 1;y++)
+ {
+ row0 = (y + 0) * finalwidth;
+ row1 = (y + 1) * finalwidth;
+ for (x = 0;x < finalwidth - 1;x++)
+ {
+ *e++ = row0;
+ *e++ = row1;
+ *e++ = row0 + 1;
+ *e++ = row1;
+ *e++ = row1 + 1;
+ *e++ = row0 + 1;
+ row0++;
+ row1++;
+ }
+ }
+ out->num_triangles = Mod_RemoveDegenerateTriangles(out->num_triangles, out->data_element3i, out->data_element3i, out->data_vertex3f);
+ if (developer.integer)
+ {
+ if (out->num_triangles < finaltriangles)
+ Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles, %i degenerate triangles removed (leaving %i)\n", patchsize[0], patchsize[1], out->num_vertices, finaltriangles, finaltriangles - out->num_triangles, out->num_triangles);
+ else
+ Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles\n", patchsize[0], patchsize[1], out->num_vertices, out->num_triangles);
+ }
+ // q3map does not put in collision brushes for curves... ugh
+ out->collisions = true;
break;
case Q3FACETYPE_FLARE:
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_FLARE not supported (yet)\n", i, out->texture->name);
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_FLARE not supported (yet)\n", i, out->texture->name);
+ // don't render it
+ out->num_vertices = 0;
+ out->num_triangles = 0;
out->type = 0;
- continue;
break;
}
- for (j = 0, invalidelements = 0;j < out->numelements;j++)
- if (out->data_element3i[j] < 0 || out->data_element3i[j] >= out->numvertices)
+ for (j = 0, invalidelements = 0;j < out->num_triangles * 3;j++)
+ if (out->data_element3i[j] < 0 || out->data_element3i[j] >= out->num_vertices)
invalidelements++;
if (invalidelements)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: Warning: face #%i has %i invalid elements, type = %i, texture->name = \"%s\", texture->surfaceflags = %i, texture->contents = %i, firstvertex = %i, numvertices = %i, firstelement = %i, numelements = %i, elements list:\n", i, invalidelements, out->type, out->texture->name, out->texture->surfaceflags, out->texture->contents, out->firstvertex, out->numvertices, out->firstelement, out->numelements);
- for (j = 0;j < out->numelements;j++)
+ Con_Printf("Mod_Q3BSP_LoadFaces: Warning: face #%i has %i invalid elements, type = %i, texture->name = \"%s\", texture->surfaceflags = %i, texture->nativecontents = %i, firstvertex = %i, numvertices = %i, firstelement = %i, numelements = %i, elements list:\n", i, invalidelements, out->type, out->texture->name, out->texture->surfaceflags, out->texture->nativecontents, out->firstvertex, out->num_vertices, out->firstelement, out->num_triangles * 3);
+ for (j = 0;j < out->num_triangles * 3;j++)
{
Con_Printf(" %i", out->data_element3i[j]);
- if (out->data_element3i[j] < 0 || out->data_element3i[j] >= out->numvertices)
+ if (out->data_element3i[j] < 0 || out->data_element3i[j] >= out->num_vertices)
out->data_element3i[j] = 0;
}
Con_Printf("\n");
}
+ // for shadow volumes
+ Mod_BuildTriangleNeighbors(out->data_neighbor3i, out->data_element3i, out->num_triangles);
+ // for per pixel lighting
+ Mod_BuildTextureVectorsAndNormals(out->num_vertices, out->num_triangles, out->data_vertex3f, out->data_texcoordtexture2f, out->data_element3i, out->data_svector3f, out->data_tvector3f, out->data_normal3f);
+ // calculate a bounding box
+ VectorClear(out->mins);
+ VectorClear(out->maxs);
+ if (out->num_vertices)
+ {
+ VectorCopy(out->data_vertex3f, out->mins);
+ VectorCopy(out->data_vertex3f, out->maxs);
+ for (j = 1, v = out->data_vertex3f + 3;j < out->num_vertices;j++, v += 3)
+ {
+ out->mins[0] = min(out->mins[0], v[0]);
+ out->maxs[0] = max(out->maxs[0], v[0]);
+ out->mins[1] = min(out->mins[1], v[1]);
+ out->maxs[1] = max(out->maxs[1], v[1]);
+ out->mins[2] = min(out->mins[2], v[2]);
+ out->maxs[2] = max(out->maxs[2], v[2]);
+ }
+ out->mins[0] -= 1.0f;
+ out->mins[1] -= 1.0f;
+ out->mins[2] -= 1.0f;
+ out->maxs[0] += 1.0f;
+ out->maxs[1] += 1.0f;
+ out->maxs[2] += 1.0f;
+ }
+ }
+
+ // LordHavoc: experimental array merger (disabled because it wastes time and uses 2x memory while merging)
+ /*
+ {
+ int totalverts, totaltris;
+ int originalnum_vertices;
+ float *originaldata_vertex3f;
+ float *originaldata_texcoordtexture2f;
+ float *originaldata_texcoordlightmap2f;
+ float *originaldata_svector3f;
+ float *originaldata_tvector3f;
+ float *originaldata_normal3f;
+ float *originaldata_color4f;
+ int originalnum_triangles;
+ int *originaldata_element3i;
+ int *originaldata_neighbor3i;
+
+ totalverts = 0;
+ totaltris = 0;
+ for (i = 0, out = loadmodel->brushq3.data_faces;i < count;i++, out++)
+ {
+ if (!out->type)
+ continue;
+ totalverts += out->num_vertices;
+ totaltris += out->num_triangles;
}
+
+ originalnum_vertices = loadmodel->brushq3.num_vertices;
+ originaldata_vertex3f = loadmodel->brushq3.data_vertex3f;
+ originaldata_texcoordtexture2f = loadmodel->brushq3.data_texcoordtexture2f;
+ originaldata_texcoordlightmap2f = loadmodel->brushq3.data_texcoordlightmap2f;
+ originaldata_svector3f = loadmodel->brushq3.data_svector3f;
+ originaldata_tvector3f = loadmodel->brushq3.data_tvector3f;
+ originaldata_normal3f = loadmodel->brushq3.data_normal3f;
+ originaldata_color4f = loadmodel->brushq3.data_color4f;
+ originalnum_triangles = loadmodel->brushq3.num_triangles;
+ originaldata_element3i = loadmodel->brushq3.data_element3i;
+ originaldata_neighbor3i = loadmodel->brushq3.data_neighbor3i;
+ loadmodel->brushq3.num_vertices = totalverts;
+ loadmodel->brushq3.data_vertex3f = Mem_Alloc(loadmodel->mempool, totalverts * (sizeof(float) * (3 + 2 + 2 + 3 + 3 + 3 + 4)) + totaltris * (sizeof(int) * (3 * 2)));
+ loadmodel->brushq3.data_texcoordtexture2f = loadmodel->brushq3.data_vertex3f + totalverts * 3;
+ loadmodel->brushq3.data_texcoordlightmap2f = loadmodel->brushq3.data_texcoordtexture2f + totalverts * 2;
+ loadmodel->brushq3.data_svector3f = loadmodel->brushq3.data_texcoordlightmap2f + totalverts * 2;
+ loadmodel->brushq3.data_tvector3f = loadmodel->brushq3.data_svector3f + totalverts * 3;
+ loadmodel->brushq3.data_normal3f = loadmodel->brushq3.data_tvector3f + totalverts * 3;
+ loadmodel->brushq3.data_color4f = loadmodel->brushq3.data_normal3f + totalverts * 3;
+ loadmodel->brushq3.num_triangles = totaltris;
+ loadmodel->brushq3.data_element3i = (int *)(loadmodel->brushq3.data_color4f + totalverts * 4);
+ loadmodel->brushq3.data_neighbor3i = loadmodel->brushq3.data_element3i + totaltris * 3;
+ totalverts = 0;
+ totaltris = 0;
+ for (i = 0, out = loadmodel->brushq3.data_faces;i < count;i++, out++)
+ {
+ if (!out->type)
+ continue;
+ Con_Printf("totalverts %i, totaltris %i\n", totalverts, totaltris);
+ memcpy(loadmodel->brushq3.data_vertex3f + totalverts * 3, out->data_vertex3f, out->num_vertices * 3 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_texcoordtexture2f + totalverts * 2, out->data_texcoordtexture2f, out->num_vertices * 2 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_texcoordlightmap2f + totalverts * 2, out->data_texcoordlightmap2f, out->num_vertices * 2 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_svector3f + totalverts * 3, out->data_svector3f, out->num_vertices * 3 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_tvector3f + totalverts * 3, out->data_tvector3f, out->num_vertices * 3 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_normal3f + totalverts * 3, out->data_normal3f, out->num_vertices * 3 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_color4f + totalverts * 4, out->data_color4f, out->num_vertices * 4 * sizeof(float));
+ memcpy(loadmodel->brushq3.data_element3i + totaltris * 3, out->data_element3i, out->num_triangles * 3 * sizeof(int));
+ memcpy(loadmodel->brushq3.data_neighbor3i + totaltris * 3, out->data_neighbor3i, out->num_triangles * 3 * sizeof(int));
+ if (out->firstvertex == -1)
+ Mem_Free(out->data_vertex3f);
+ if (out->firstelement == -1)
+ Mem_Free(out->data_element3i);
+ out->firstvertex = totalverts;
+ out->data_vertex3f = loadmodel->brushq3.data_vertex3f + out->firstvertex * 3;
+ out->data_texcoordtexture2f = loadmodel->brushq3.data_texcoordtexture2f + out->firstvertex * 2;
+ out->data_texcoordlightmap2f = loadmodel->brushq3.data_texcoordlightmap2f + out->firstvertex * 2;
+ out->data_svector3f = loadmodel->brushq3.data_svector3f + out->firstvertex * 3;
+ out->data_tvector3f = loadmodel->brushq3.data_tvector3f + out->firstvertex * 3;
+ out->data_normal3f = loadmodel->brushq3.data_normal3f + out->firstvertex * 3;
+ out->data_color4f = loadmodel->brushq3.data_color4f + out->firstvertex * 4;
+ out->firstelement = totaltris * 3;
+ out->data_element3i = loadmodel->brushq3.data_element3i + out->firstelement;
+ out->data_neighbor3i = loadmodel->brushq3.data_neighbor3i + out->firstelement;
+ //for (j = 0;j < out->numtriangles * 3;j++)
+ // out->data_element3i[j] += totalverts - out->firstvertex;
+ totalverts += out->num_vertices;
+ totaltris += out->num_triangles;
+ }
+ Mem_Free(originaldata_vertex3f);
+ Mem_Free(originaldata_element3i);
+ }
+ */
}
static void Mod_Q3BSP_LoadModels(lump_t *l)
for (i = 0;i < count;i++, in++, out++)
{
- out->isnode = false;
out->parent = NULL;
+ out->plane = NULL;
out->clusterindex = LittleLong(in->clusterindex);
out->areaindex = LittleLong(in->areaindex);
for (j = 0;j < 3;j++)
{
// yes the mins/maxs are ints
- out->mins[j] = LittleLong(in->mins[j]);
- out->maxs[j] = LittleLong(in->maxs[j]);
+ out->mins[j] = LittleLong(in->mins[j]) - 1;
+ out->maxs[j] = LittleLong(in->maxs[j]) + 1;
}
n = LittleLong(in->firstleafface);
c = LittleLong(in->numleaffaces);
if (node->parent)
Host_Error("Mod_Q3BSP_LoadNodes_RecursiveSetParent: runaway recursion\n");
node->parent = parent;
- if (node->isnode)
+ if (node->plane)
{
Mod_Q3BSP_LoadNodes_RecursiveSetParent(node->children[0], node);
Mod_Q3BSP_LoadNodes_RecursiveSetParent(node->children[1], node);
for (i = 0;i < count;i++, in++, out++)
{
- out->isnode = true;
out->parent = NULL;
n = LittleLong(in->planeindex);
if (n < 0 || n >= loadmodel->brushq3.num_planes)
}
else
{
- n = 1 - n;
+ n = -1 - n;
if (n >= loadmodel->brushq3.num_leafs)
Host_Error("Mod_Q3BSP_LoadNodes: invalid child leaf index %i (%i leafs)\n", n, loadmodel->brushq3.num_leafs);
out->children[j] = (q3mnode_t *)(loadmodel->brushq3.data_leafs + n);
}
}
- // we don't load the mins/maxs
+ for (j = 0;j < 3;j++)
+ {
+ // yes the mins/maxs are ints
+ out->mins[j] = LittleLong(in->mins[j]) - 1;
+ out->maxs[j] = LittleLong(in->maxs[j]) + 1;
+ }
}
// set the parent pointers
loadmodel->brushq3.num_lightgrid_isize[1] = loadmodel->brushq3.num_lightgrid_imaxs[1] - loadmodel->brushq3.num_lightgrid_imins[1] + 1;
loadmodel->brushq3.num_lightgrid_isize[2] = loadmodel->brushq3.num_lightgrid_imaxs[2] - loadmodel->brushq3.num_lightgrid_imins[2] + 1;
count = loadmodel->brushq3.num_lightgrid_isize[0] * loadmodel->brushq3.num_lightgrid_isize[1] * loadmodel->brushq3.num_lightgrid_isize[2];
- if (l->filelen < count * (int)sizeof(*in))
- Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)\n", l->filelen, count * sizeof(*in), loadmodel->brushq3.num_lightgrid_dimensions[0], loadmodel->brushq3.num_lightgrid_dimensions[1], loadmodel->brushq3.num_lightgrid_dimensions[2]);
- if (l->filelen != count * (int)sizeof(*in))
- Con_Printf("Mod_Q3BSP_LoadLightGrid: Warning: calculated lightgrid size %i bytes does not match lump size %i\n", count * sizeof(*in), l->filelen);
+ if (l->filelen)
+ {
+ if (l->filelen < count * (int)sizeof(*in))
+ Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)\n", l->filelen, count * sizeof(*in), loadmodel->brushq3.num_lightgrid_dimensions[0], loadmodel->brushq3.num_lightgrid_dimensions[1], loadmodel->brushq3.num_lightgrid_dimensions[2]);
+ if (l->filelen != count * (int)sizeof(*in))
+ Con_Printf("Mod_Q3BSP_LoadLightGrid: Warning: calculated lightgrid size %i bytes does not match lump size %i\n", count * sizeof(*in), l->filelen);
+ }
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
loadmodel->brushq3.data_lightgrid = out;
loadmodel->brushq3.num_lightgrid = count;
// no swapping or validation necessary
- memcpy(out, in, count * (int)sizeof(*out));
+ if (l->filelen)
+ memcpy(out, in, count * (int)sizeof(*out));
+ else
+ {
+ // no data, fill with white
+ int i;
+ for (i = 0;i < count;i++)
+ {
+ out[i].ambientrgb[0] = 128;
+ out[i].ambientrgb[1] = 128;
+ out[i].ambientrgb[2] = 128;
+ out[i].diffusergb[0] = 0;
+ out[i].diffusergb[1] = 0;
+ out[i].diffusergb[2] = 0;
+ out[i].diffusepitch = 0;
+ out[i].diffuseyaw = 0;
+ }
+ }
Matrix4x4_CreateScale3(&loadmodel->brushq3.num_lightgrid_indexfromworld, loadmodel->brushq3.num_lightgrid_scale[0], loadmodel->brushq3.num_lightgrid_scale[1], loadmodel->brushq3.num_lightgrid_scale[2]);
Matrix4x4_ConcatTranslate(&loadmodel->brushq3.num_lightgrid_indexfromworld, -loadmodel->brushq3.num_lightgrid_imins[0] * loadmodel->brushq3.num_lightgrid_cellsize[0], -loadmodel->brushq3.num_lightgrid_imins[1] * loadmodel->brushq3.num_lightgrid_cellsize[1], -loadmodel->brushq3.num_lightgrid_imins[2] * loadmodel->brushq3.num_lightgrid_cellsize[2]);
q3dpvs_t *in;
int totalchains;
+ if (l->filelen == 0)
+ {
+ int i;
+ // unvised maps often have cluster indices even without pvs, so check
+ // leafs to find real number of clusters
+ loadmodel->brushq3.num_pvsclusters = 1;
+ for (i = 0;i < loadmodel->brushq3.num_leafs;i++)
+ loadmodel->brushq3.num_pvsclusters = min(loadmodel->brushq3.num_pvsclusters, loadmodel->brushq3.data_leafs[i].clusterindex + 1);
+
+ // create clusters
+ loadmodel->brushq3.num_pvsclusterbytes = (loadmodel->brushq3.num_pvsclusters + 7) / 8;
+ totalchains = loadmodel->brushq3.num_pvsclusterbytes * loadmodel->brushq3.num_pvsclusters;
+ loadmodel->brushq3.data_pvsclusters = Mem_Alloc(loadmodel->mempool, totalchains);
+ memset(loadmodel->brushq3.data_pvsclusters, 0xFF, totalchains);
+ return;
+ }
+
in = (void *)(mod_base + l->fileofs);
if (l->filelen < 9)
Host_Error("Mod_Q3BSP_LoadPVS: funny lump size in %s",loadmodel->name);
loadmodel->brushq3.num_pvsclusters = LittleLong(in->numclusters);
- loadmodel->brushq3.num_pvschainlength = LittleLong(in->chainlength);
- if (loadmodel->brushq3.num_pvschainlength < ((loadmodel->brushq3.num_pvsclusters + 7) / 8))
- Host_Error("Mod_Q3BSP_LoadPVS: (chainlength = %i) < ((numclusters = %i) + 7) / 8\n", loadmodel->brushq3.num_pvschainlength, loadmodel->brushq3.num_pvsclusters);
- totalchains = loadmodel->brushq3.num_pvschainlength * loadmodel->brushq3.num_pvsclusters;
+ loadmodel->brushq3.num_pvsclusterbytes = LittleLong(in->chainlength);
+ if (loadmodel->brushq3.num_pvsclusterbytes < ((loadmodel->brushq3.num_pvsclusters + 7) / 8))
+ Host_Error("Mod_Q3BSP_LoadPVS: (chainlength = %i) < ((numclusters = %i) + 7) / 8\n", loadmodel->brushq3.num_pvsclusterbytes, loadmodel->brushq3.num_pvsclusters);
+ totalchains = loadmodel->brushq3.num_pvsclusterbytes * loadmodel->brushq3.num_pvsclusters;
if (l->filelen < totalchains + (int)sizeof(*in))
- Host_Error("Mod_Q3BSP_LoadPVS: lump too small ((numclusters = %i) * (chainlength = %i) + sizeof(q3dpvs_t) == %i bytes, lump is %i bytes)\n", loadmodel->brushq3.num_pvsclusters, loadmodel->brushq3.num_pvschainlength, totalchains + sizeof(*in), l->filelen);
+ Host_Error("Mod_Q3BSP_LoadPVS: lump too small ((numclusters = %i) * (chainlength = %i) + sizeof(q3dpvs_t) == %i bytes, lump is %i bytes)\n", loadmodel->brushq3.num_pvsclusters, loadmodel->brushq3.num_pvsclusterbytes, totalchains + sizeof(*in), l->filelen);
- loadmodel->brushq3.data_pvschains = Mem_Alloc(loadmodel->mempool, totalchains);
- memcpy(loadmodel->brushq3.data_pvschains, (qbyte *)(in + 1), totalchains);
+ loadmodel->brushq3.data_pvsclusters = Mem_Alloc(loadmodel->mempool, totalchains);
+ memcpy(loadmodel->brushq3.data_pvsclusters, (qbyte *)(in + 1), totalchains);
}
-void Mod_Q3BSP_Load(model_t *mod, void *buffer)
+static void Mod_Q3BSP_FindNonSolidLocation(model_t *model, const vec3_t in, vec3_t out, vec_t radius)
+{
+ // FIXME: finish this code
+ VectorCopy(in, out);
+}
+
+static void Mod_Q3BSP_LightPoint(model_t *model, const vec3_t p, vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal)
+{
+ int i, j, k, index[3];
+ float transformed[3], blend1, blend2, blend, yaw, pitch, sinpitch;
+ q3dlightgrid_t *a, *s;
+ // FIXME: write this
+ if (!model->brushq3.num_lightgrid)
+ {
+ ambientcolor[0] = 1;
+ ambientcolor[1] = 1;
+ ambientcolor[2] = 1;
+ return;
+ }
+ Matrix4x4_Transform(&model->brushq3.num_lightgrid_indexfromworld, p, transformed);
+ //Matrix4x4_Print(&model->brushq3.num_lightgrid_indexfromworld);
+ //Con_Printf("%f %f %f transformed %f %f %f clamped ", p[0], p[1], p[2], transformed[0], transformed[1], transformed[2]);
+ transformed[0] = bound(0, transformed[0], model->brushq3.num_lightgrid_isize[0] - 1);
+ transformed[1] = bound(0, transformed[1], model->brushq3.num_lightgrid_isize[1] - 1);
+ transformed[2] = bound(0, transformed[2], model->brushq3.num_lightgrid_isize[2] - 1);
+ index[0] = (int)floor(transformed[0]);
+ index[1] = (int)floor(transformed[1]);
+ index[2] = (int)floor(transformed[2]);
+ //Con_Printf("%f %f %f index %i %i %i:\n", transformed[0], transformed[1], transformed[2], index[0], index[1], index[2]);
+ // now lerp the values
+ VectorClear(diffusenormal);
+ a = &model->brushq3.data_lightgrid[(index[2] * model->brushq3.num_lightgrid_isize[1] + index[1]) * model->brushq3.num_lightgrid_isize[0] + index[0]];
+ for (k = 0;k < 2;k++)
+ {
+ blend1 = (k ? (transformed[2] - index[2]) : (1 - (transformed[2] - index[2])));
+ if (blend1 < 0.001f || index[2] + k >= model->brushq3.num_lightgrid_isize[2])
+ continue;
+ for (j = 0;j < 2;j++)
+ {
+ blend2 = blend1 * (j ? (transformed[1] - index[1]) : (1 - (transformed[1] - index[1])));
+ if (blend2 < 0.001f || index[1] + j >= model->brushq3.num_lightgrid_isize[1])
+ continue;
+ for (i = 0;i < 2;i++)
+ {
+ blend = blend2 * (i ? (transformed[0] - index[0]) : (1 - (transformed[0] - index[0])));
+ if (blend < 0.001f || index[0] + i >= model->brushq3.num_lightgrid_isize[0])
+ continue;
+ s = a + (k * model->brushq3.num_lightgrid_isize[1] + j) * model->brushq3.num_lightgrid_isize[0] + i;
+ VectorMA(ambientcolor, blend * (1.0f / 128.0f), s->ambientrgb, ambientcolor);
+ VectorMA(diffusecolor, blend * (1.0f / 128.0f), s->diffusergb, diffusecolor);
+ pitch = s->diffusepitch * M_PI / 128;
+ yaw = s->diffuseyaw * M_PI / 128;
+ sinpitch = sin(pitch);
+ diffusenormal[0] += blend * (cos(yaw) * sinpitch);
+ diffusenormal[1] += blend * (sin(yaw) * sinpitch);
+ diffusenormal[2] += blend * (cos(pitch));
+ //Con_Printf("blend %f: ambient %i %i %i, diffuse %i %i %i, diffusepitch %i diffuseyaw %i (%f %f, normal %f %f %f)\n", blend, s->ambientrgb[0], s->ambientrgb[1], s->ambientrgb[2], s->diffusergb[0], s->diffusergb[1], s->diffusergb[2], s->diffusepitch, s->diffuseyaw, pitch, yaw, (cos(yaw) * cospitch), (sin(yaw) * cospitch), (-sin(pitch)));
+ }
+ }
+ }
+ VectorNormalize(diffusenormal);
+ //Con_Printf("result: ambient %f %f %f diffuse %f %f %f diffusenormal %f %f %f\n", ambientcolor[0], ambientcolor[1], ambientcolor[2], diffusecolor[0], diffusecolor[1], diffusecolor[2], diffusenormal[0], diffusenormal[1], diffusenormal[2]);
+}
+
+static void Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace_t *trace, q3mnode_t *node, const vec3_t point, int markframe)
{
int i;
+ q3mleaf_t *leaf;
+ colbrushf_t *brush;
+ // find which leaf the point is in
+ while (node->plane)
+ node = node->children[DotProduct(point, node->plane->normal) < node->plane->dist];
+ // point trace the brushes
+ leaf = (q3mleaf_t *)node;
+ for (i = 0;i < leaf->numleafbrushes;i++)
+ {
+ brush = leaf->firstleafbrush[i]->colbrushf;
+ if (brush && brush->markframe != markframe && BoxesOverlap(point, point, brush->mins, brush->maxs))
+ {
+ brush->markframe = markframe;
+ Collision_TracePointBrushFloat(trace, point, leaf->firstleafbrush[i]->colbrushf);
+ }
+ }
+ // can't do point traces on curves (they have no thickness)
+}
+
+static void Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace_t *trace, q3mnode_t *node, const vec3_t start, const vec3_t end, vec_t startfrac, vec_t endfrac, const vec3_t linestart, const vec3_t lineend, int markframe, const vec3_t segmentmins, const vec3_t segmentmaxs)
+{
+ int i, startside, endside;
+ float dist1, dist2, midfrac, mid[3], nodesegmentmins[3], nodesegmentmaxs[3];
+ q3mleaf_t *leaf;
+ q3mface_t *face;
+ colbrushf_t *brush;
+ if (startfrac > trace->realfraction)
+ return;
+ // note: all line fragments past first impact fraction are ignored
+ if (VectorCompare(start, end))
+ {
+ // find which leaf the point is in
+ while (node->plane)
+ node = node->children[DotProduct(start, node->plane->normal) < node->plane->dist];
+ }
+ else
+ {
+ // find which nodes the line is in and recurse for them
+ while (node->plane)
+ {
+ // recurse down node sides
+ dist1 = PlaneDiff(start, node->plane);
+ dist2 = PlaneDiff(end, node->plane);
+ startside = dist1 < 0;
+ endside = dist2 < 0;
+ if (startside == endside)
+ {
+ // most of the time the line fragment is on one side of the plane
+ node = node->children[startside];
+ }
+ else
+ {
+ // line crosses node plane, split the line
+ midfrac = dist1 / (dist1 - dist2);
+ VectorLerp(start, midfrac, end, mid);
+ // take the near side first
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[startside], start, mid, startfrac, midfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ if (midfrac <= trace->realfraction)
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[endside], mid, end, midfrac, endfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ return;
+ }
+ }
+ }
+ // hit a leaf
+ nodesegmentmins[0] = min(start[0], end[0]);
+ nodesegmentmins[1] = min(start[1], end[1]);
+ nodesegmentmins[2] = min(start[2], end[2]);
+ nodesegmentmaxs[0] = max(start[0], end[0]);
+ nodesegmentmaxs[1] = max(start[1], end[1]);
+ nodesegmentmaxs[2] = max(start[2], end[2]);
+ // line trace the brushes
+ leaf = (q3mleaf_t *)node;
+ for (i = 0;i < leaf->numleafbrushes;i++)
+ {
+ brush = leaf->firstleafbrush[i]->colbrushf;
+ if (brush && brush->markframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, brush->mins, brush->maxs))
+ {
+ brush->markframe = markframe;
+ Collision_TraceLineBrushFloat(trace, linestart, lineend, leaf->firstleafbrush[i]->colbrushf, leaf->firstleafbrush[i]->colbrushf);
+ if (startfrac > trace->realfraction)
+ return;
+ }
+ }
+ // can't do point traces on curves (they have no thickness)
+ if (mod_q3bsp_curves_collisions.integer && !VectorCompare(start, end))
+ {
+ // line trace the curves
+ for (i = 0;i < leaf->numleaffaces;i++)
+ {
+ face = leaf->firstleafface[i];
+ if (face->collisions && face->collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, face->mins, face->maxs))
+ {
+ face->collisionmarkframe = markframe;
+ Collision_TraceLineTriangleMeshFloat(trace, linestart, lineend, face->num_triangles, face->data_element3i, face->data_vertex3f, face->texture->supercontents, segmentmins, segmentmaxs);
+ if (startfrac > trace->realfraction)
+ return;
+ }
+ }
+ }
+}
+
+static void Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace_t *trace, q3mnode_t *node, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int markframe, const vec3_t segmentmins, const vec3_t segmentmaxs)
+{
+ int i;
+ //int sides;
+ float nodesegmentmins[3], nodesegmentmaxs[3];
+ q3mleaf_t *leaf;
+ colbrushf_t *brush;
+ q3mface_t *face;
+ /*
+ // find which nodes the line is in and recurse for them
+ while (node->plane)
+ {
+ // recurse down node sides
+ int startside, endside;
+ float dist1near, dist1far, dist2near, dist2far;
+ BoxPlaneCornerDistances(thisbrush_start->mins, thisbrush_start->maxs, node->plane, &dist1near, &dist1far);
+ BoxPlaneCornerDistances(thisbrush_end->mins, thisbrush_end->maxs, node->plane, &dist2near, &dist2far);
+ startside = dist1near < 0;
+ startside = dist1near < 0 ? (dist1far < 0 ? 1 : 2) : (dist1far < 0 ? 2 : 0);
+ endside = dist2near < 0 ? (dist2far < 0 ? 1 : 2) : (dist2far < 0 ? 2 : 0);
+ if (startside == 2 || endside == 2)
+ {
+ // brushes cross plane
+ // do not clip anything, just take both sides
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ if (startside == 0)
+ {
+ if (endside == 0)
+ {
+ node = node->children[0];
+ continue;
+ }
+ else
+ {
+ //midf0 = dist1near / (dist1near - dist2near);
+ //midf1 = dist1far / (dist1far - dist2far);
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ }
+ else
+ {
+ if (endside == 0)
+ {
+ //midf0 = dist1near / (dist1near - dist2near);
+ //midf1 = dist1far / (dist1far - dist2far);
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ else
+ {
+ node = node->children[1];
+ continue;
+ }
+ }
+
+ if (dist1near < 0 && dist2near < 0 && dist1far < 0 && dist2far < 0){node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near < 0 && dist1far < 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near < 0 && dist1far >= 0 && dist2far < 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near < 0 && dist1far >= 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near >= 0 && dist1far < 0 && dist2far < 0){node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near >= 0 && dist1far < 0 && dist2far >= 0){}
+ if (dist1near < 0 && dist2near >= 0 && dist1far >= 0 && dist2far < 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near >= 0 && dist1far >= 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near < 0 && dist1far < 0 && dist2far < 0){node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near < 0 && dist1far < 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near < 0 && dist1far >= 0 && dist2far < 0){}
+ if (dist1near >= 0 && dist2near < 0 && dist1far >= 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far < 0 && dist2far < 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far < 0 && dist2far >= 0){node = node->children[0];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far >= 0 && dist2far < 0){node = node->children[0];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far >= 0 && dist2far >= 0){node = node->children[0];continue;}
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ }
+ else // d1n<0 && d2n>0
+ {
+ }
+ }
+ else // d1n<0 && d2n>0
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ }
+ else // d1n<0 && d2n>0
+ {
+ }
+ }
+ }
+ else // d1n<0 && d2n>0
+ {
+ }
+ }
+ else // d1n>0
+ {
+ if (dist2near < 0) // d1n>0 && d2n<0
+ {
+ }
+ else // d1n>0 && d2n>0
+ {
+ }
+ }
+ if (dist1near < 0 == dist1far < 0 == dist2near < 0 == dist2far < 0)
+ {
+ node = node->children[startside];
+ continue;
+ }
+ if (dist1near < dist2near)
+ {
+ // out
+ if (dist1near >= 0)
+ {
+ node = node->children[0];
+ continue;
+ }
+ if (dist2far < 0)
+ {
+ node = node->children[1];
+ continue;
+ }
+ // dist1near < 0 && dist2far >= 0
+ }
+ else
+ {
+ // in
+ }
+ startside = dist1near < 0 ? (dist1far < 0 ? 1 : 2) : (dist1far < 0 ? 2 : 0);
+ endside = dist2near < 0 ? (dist2far < 0 ? 1 : 2) : (dist2far < 0 ? 2 : 0);
+ if (startside == 2 || endside == 2)
+ {
+ // brushes cross plane
+ // do not clip anything, just take both sides
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ else if (startside == endside)
+ node = node->children[startside];
+ else if (startside == 0) // endside = 1 (start infront, end behind)
+ {
+ }
+ else // startside == 1 endside = 0 (start behind, end infront)
+ {
+ }
+ == endside)
+ {
+ if (startside < 2)
+ node = node->children[startside];
+ else
+ {
+ // start and end brush cross plane
+ }
+ }
+ else
+ {
+ }
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ node = node->children[1];
+ else if (dist1near < 0 && dist1far < 0 && dist2near >= 0 && dist2far >= 0)
+ else if (dist1near >= 0 && dist1far >= 0 && dist2near < 0 && dist2far < 0)
+ else if (dist1near >= 0 && dist1far >= 0 && dist2near >= 0 && dist2far >= 0)
+ node = node->children[0];
+ else
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ {
+ }
+ else if (dist1near >= 0 && dist1far >= 0)
+ {
+ }
+ else // mixed (lying on plane)
+ {
+ }
+ {
+ if (dist2near < 0 && dist2far < 0)
+ {
+ }
+ else
+ node = node->children[1];
+ }
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ node = node->children[0];
+ else if (dist1near >= 0 && dist1far >= 0 && dist2near >= 0 && dist2far >= 0)
+ node = node->children[1];
+ else
+ {
+ // both sides
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[startside], start, mid, startfrac, midfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ sides = dist1near || dist1near < 0 | dist1far < 0 | dist2near < 0 | dist
+ startside = dist1 < 0;
+ endside = dist2 < 0;
+ if (startside == endside)
+ {
+ // most of the time the line fragment is on one side of the plane
+ node = node->children[startside];
+ }
+ else
+ {
+ // line crosses node plane, split the line
+ midfrac = dist1 / (dist1 - dist2);
+ VectorLerp(start, midfrac, end, mid);
+ // take the near side first
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[startside], start, mid, startfrac, midfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ if (midfrac <= trace->fraction)
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[endside], mid, end, midfrac, endfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ return;
+ }
+ }
+ */
+#if 1
+ for (;;)
+ {
+ nodesegmentmins[0] = max(segmentmins[0], node->mins[0]);
+ nodesegmentmins[1] = max(segmentmins[1], node->mins[1]);
+ nodesegmentmins[2] = max(segmentmins[2], node->mins[2]);
+ nodesegmentmaxs[0] = min(segmentmaxs[0], node->maxs[0]);
+ nodesegmentmaxs[1] = min(segmentmaxs[1], node->maxs[1]);
+ nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2]);
+ if (nodesegmentmins[0] > nodesegmentmaxs[0] || nodesegmentmins[1] > nodesegmentmaxs[1] || nodesegmentmins[2] > nodesegmentmaxs[2])
+ return;
+ if (!node->plane)
+ break;
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+#elif 0
+ // FIXME: could be made faster by copying TraceLine code and making it use
+ // box plane distances... (variant on the BoxOnPlaneSide code)
+ for (;;)
+ {
+ nodesegmentmins[0] = max(segmentmins[0], node->mins[0]);
+ nodesegmentmins[1] = max(segmentmins[1], node->mins[1]);
+ nodesegmentmins[2] = max(segmentmins[2], node->mins[2]);
+ nodesegmentmaxs[0] = min(segmentmaxs[0], node->maxs[0]);
+ nodesegmentmaxs[1] = min(segmentmaxs[1], node->maxs[1]);
+ nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2]);
+ if (nodesegmentmins[0] > nodesegmentmaxs[0] || nodesegmentmins[1] > nodesegmentmaxs[1] || nodesegmentmins[2] > nodesegmentmaxs[2])
+ return;
+ if (!node->plane)
+ break;
+ if (mod_q3bsp_debugtracebrush.integer == 2)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ else if (mod_q3bsp_debugtracebrush.integer == 1)
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ continue;
+ }
+ else
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ // now check start and end brush boxes to handle a lot of 'diagonal' cases more efficiently...
+ sides = BoxOnPlaneSide(thisbrush_start->mins, thisbrush_start->maxs, node->plane) | BoxOnPlaneSide(thisbrush_end->mins, thisbrush_end->maxs, node->plane);
+ if (sides == 3)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ }
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ continue;
+ }
+ return;
+ }
+#else
+ // FIXME: could be made faster by copying TraceLine code and making it use
+ // box plane distances... (variant on the BoxOnPlaneSide code)
+ for (;;)
+ {
+ nodesegmentmins[0] = max(segmentmins[0], node->mins[0]);
+ nodesegmentmins[1] = max(segmentmins[1], node->mins[1]);
+ nodesegmentmins[2] = max(segmentmins[2], node->mins[2]);
+ nodesegmentmaxs[0] = min(segmentmaxs[0], node->maxs[0]);
+ nodesegmentmaxs[1] = min(segmentmaxs[1], node->maxs[1]);
+ nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2]);
+ if (nodesegmentmins[0] > nodesegmentmaxs[0] || nodesegmentmins[1] > nodesegmentmaxs[1] || nodesegmentmins[2] > nodesegmentmaxs[2])
+ return;
+ if (!node->plane)
+ break;
+ if (mod_q3bsp_debugtracebrush.integer == 2)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ else if (mod_q3bsp_debugtracebrush.integer == 1)
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ else
+ {
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ }
+ }
+ else
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ // now check start and end brush boxes to handle a lot of 'diagonal' cases more efficiently...
+ sides = BoxOnPlaneSide(thisbrush_start->mins, thisbrush_start->maxs, node->plane) | BoxOnPlaneSide(thisbrush_end->mins, thisbrush_end->maxs, node->plane);
+ if (sides == 3)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ sides = 2;
+ }
+ }
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ }
+ }
+#endif
+ // hit a leaf
+ leaf = (q3mleaf_t *)node;
+ for (i = 0;i < leaf->numleafbrushes;i++)
+ {
+ brush = leaf->firstleafbrush[i]->colbrushf;
+ if (brush && brush->markframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, brush->mins, brush->maxs))
+ {
+ brush->markframe = markframe;
+ Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, leaf->firstleafbrush[i]->colbrushf, leaf->firstleafbrush[i]->colbrushf);
+ }
+ }
+ if (mod_q3bsp_curves_collisions.integer)
+ {
+ for (i = 0;i < leaf->numleaffaces;i++)
+ {
+ face = leaf->firstleafface[i];
+ if (face->collisions && face->markframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, face->mins, face->maxs))
+ {
+ face->markframe = markframe;
+ Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, face->num_triangles, face->data_element3i, face->data_vertex3f, face->texture->supercontents, segmentmins, segmentmaxs);
+ }
+ }
+ }
+}
+
+static void Mod_Q3BSP_TraceBox(model_t *model, int frame, trace_t *trace, const vec3_t boxstartmins, const vec3_t boxstartmaxs, const vec3_t boxendmins, const vec3_t boxendmaxs, int hitsupercontentsmask)
+{
+ int i;
+ float segmentmins[3], segmentmaxs[3];
+ colbrushf_t *thisbrush_start, *thisbrush_end;
+ matrix4x4_t startmatrix, endmatrix;
+ static int markframe = 0;
+ q3mface_t *face;
+ memset(trace, 0, sizeof(*trace));
+ trace->fraction = 1;
+ trace->realfraction = 1;
+ trace->hitsupercontentsmask = hitsupercontentsmask;
+ Matrix4x4_CreateIdentity(&startmatrix);
+ Matrix4x4_CreateIdentity(&endmatrix);
+ segmentmins[0] = min(boxstartmins[0], boxendmins[0]);
+ segmentmins[1] = min(boxstartmins[1], boxendmins[1]);
+ segmentmins[2] = min(boxstartmins[2], boxendmins[2]);
+ segmentmaxs[0] = max(boxstartmaxs[0], boxendmaxs[0]);
+ segmentmaxs[1] = max(boxstartmaxs[1], boxendmaxs[1]);
+ segmentmaxs[2] = max(boxstartmaxs[2], boxendmaxs[2]);
+ if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(boxstartmins, boxstartmaxs) && VectorCompare(boxendmins, boxendmaxs))
+ {
+ if (VectorCompare(boxstartmins, boxendmins))
+ {
+ // point trace
+ if (model->brushq3.submodel)
+ {
+ for (i = 0;i < model->brushq3.data_thismodel->numbrushes;i++)
+ if (model->brushq3.data_thismodel->firstbrush[i].colbrushf)
+ Collision_TracePointBrushFloat(trace, boxstartmins, model->brushq3.data_thismodel->firstbrush[i].colbrushf);
+ }
+ else
+ Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace, model->brushq3.data_nodes, boxstartmins, ++markframe);
+ }
+ else
+ {
+ // line trace
+ if (model->brushq3.submodel)
+ {
+ for (i = 0;i < model->brushq3.data_thismodel->numbrushes;i++)
+ if (model->brushq3.data_thismodel->firstbrush[i].colbrushf)
+ Collision_TraceLineBrushFloat(trace, boxstartmins, boxendmins, model->brushq3.data_thismodel->firstbrush[i].colbrushf, model->brushq3.data_thismodel->firstbrush[i].colbrushf);
+ if (mod_q3bsp_curves_collisions.integer)
+ {
+ for (i = 0;i < model->brushq3.data_thismodel->numfaces;i++)
+ {
+ face = model->brushq3.data_thismodel->firstface + i;
+ if (face->collisions)
+ Collision_TraceLineTriangleMeshFloat(trace, boxstartmins, boxendmins, face->num_triangles, face->data_element3i, face->data_vertex3f, face->texture->supercontents, segmentmins, segmentmaxs);
+ }
+ }
+ }
+ else
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model->brushq3.data_nodes, boxstartmins, boxendmins, 0, 1, boxstartmins, boxendmins, ++markframe, segmentmins, segmentmaxs);
+ }
+ }
+ else
+ {
+ // box trace, performed as brush trace
+ thisbrush_start = Collision_BrushForBox(&startmatrix, boxstartmins, boxstartmaxs);
+ thisbrush_end = Collision_BrushForBox(&endmatrix, boxendmins, boxendmaxs);
+ if (model->brushq3.submodel)
+ {
+ for (i = 0;i < model->brushq3.data_thismodel->numbrushes;i++)
+ if (model->brushq3.data_thismodel->firstbrush[i].colbrushf)
+ Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, model->brushq3.data_thismodel->firstbrush[i].colbrushf, model->brushq3.data_thismodel->firstbrush[i].colbrushf);
+ if (mod_q3bsp_curves_collisions.integer)
+ {
+ for (i = 0;i < model->brushq3.data_thismodel->numfaces;i++)
+ {
+ face = model->brushq3.data_thismodel->firstface + i;
+ if (face->collisions)
+ Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, face->num_triangles, face->data_element3i, face->data_vertex3f, face->texture->supercontents, segmentmins, segmentmaxs);
+ }
+ }
+ }
+ else
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model->brushq3.data_nodes, thisbrush_start, thisbrush_end, ++markframe, segmentmins, segmentmaxs);
+ }
+}
+
+static int Mod_Q3BSP_BoxTouchingPVS(model_t *model, const qbyte *pvs, const vec3_t mins, const vec3_t maxs)
+{
+ int clusterindex, side, nodestackindex = 0;
+ q3mnode_t *node, *nodestack[1024];
+ node = model->brushq3.data_nodes;
+ if (!loadmodel->brushq3.num_pvsclusters)
+ return true;
+ for (;;)
+ {
+ if (node->plane)
+ {
+ // node - recurse down the BSP tree
+ side = BoxOnPlaneSide(mins, maxs, node->plane) - 1;
+ if (side < 2)
+ {
+ // box is on one side of plane, take that path
+ node = node->children[side];
+ }
+ else
+ {
+ // box crosses plane, take one path and remember the other
+ nodestack[nodestackindex++] = node->children[0];
+ node = node->children[1];
+ }
+ }
+ else
+ {
+ // leaf - check cluster bit
+ clusterindex = ((q3mleaf_t *)node)->clusterindex;
+#if 0
+ if (clusterindex >= loadmodel->brushq3.num_pvsclusters)
+ {
+ Con_Printf("%i >= %i\n", clusterindex, loadmodel->brushq3.num_pvsclusters);
+ return true;
+ }
+#endif
+ if (CHECKPVSBIT(pvs, clusterindex))
+ {
+ // it is visible, return immediately with the news
+ return true;
+ }
+ else
+ {
+ // nothing to see here, try another path we didn't take earlier
+ if (nodestackindex == 0)
+ break;
+ node = nodestack[--nodestackindex];
+ }
+ }
+ }
+ // it is not visible
+ return false;
+}
+
+//Returns PVS data for a given point
+//(note: can return NULL)
+static qbyte *Mod_Q3BSP_GetPVS(model_t *model, const vec3_t p)
+{
+ q3mnode_t *node;
+ Mod_CheckLoaded(model);
+ node = model->brushq3.data_nodes;
+ while (node->plane)
+ node = node->children[(node->plane->type < 3 ? p[node->plane->type] : DotProduct(p,node->plane->normal)) < node->plane->dist];
+ if (((q3mleaf_t *)node)->clusterindex >= 0)
+ return model->brushq3.data_pvsclusters + ((q3mleaf_t *)node)->clusterindex * model->brushq3.num_pvsclusterbytes;
+ else
+ return NULL;
+}
+
+static void Mod_Q3BSP_FatPVS_RecursiveBSPNode(model_t *model, const vec3_t org, vec_t radius, qbyte *pvsbuffer, int pvsbytes, q3mnode_t *node)
+{
+ while (node->plane)
+ {
+ float d = PlaneDiff(org, node->plane);
+ if (d > radius)
+ node = node->children[0];
+ else if (d < -radius)
+ node = node->children[1];
+ else
+ {
+ // go down both sides
+ Mod_Q3BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, pvsbytes, node->children[0]);
+ node = node->children[1];
+ }
+ }
+ // if this leaf is in a cluster, accumulate the pvs bits
+ if (((q3mleaf_t *)node)->clusterindex >= 0)
+ {
+ int i;
+ qbyte *pvs = model->brushq1.data_pvsclusters + ((q3mleaf_t *)node)->clusterindex * model->brushq1.num_pvsclusterbytes;
+ for (i = 0;i < pvsbytes;i++)
+ pvsbuffer[i] |= pvs[i];
+ }
+}
+
+//Calculates a PVS that is the inclusive or of all leafs within radius pixels
+//of the given point.
+static int Mod_Q3BSP_FatPVS(model_t *model, const vec3_t org, vec_t radius, qbyte *pvsbuffer, int pvsbufferlength)
+{
+ int bytes = model->brushq3.num_pvsclusterbytes;
+ bytes = min(bytes, pvsbufferlength);
+ if (r_novis.integer || !loadmodel->brushq3.num_pvsclusters)
+ {
+ memset(pvsbuffer, 0xFF, bytes);
+ return bytes;
+ }
+ memset(pvsbuffer, 0, bytes);
+ Mod_Q3BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, bytes, model->brushq3.data_nodes);
+ return bytes;
+}
+
+
+static int Mod_Q3BSP_SuperContentsFromNativeContents(model_t *model, int nativecontents)
+{
+ int supercontents = 0;
+ if (nativecontents & Q2CONTENTS_SOLID)
+ supercontents |= SUPERCONTENTS_SOLID;
+ if (nativecontents & Q2CONTENTS_WATER)
+ supercontents |= SUPERCONTENTS_WATER;
+ if (nativecontents & Q2CONTENTS_SLIME)
+ supercontents |= SUPERCONTENTS_SLIME;
+ if (nativecontents & Q2CONTENTS_LAVA)
+ supercontents |= SUPERCONTENTS_LAVA;
+ return supercontents;
+}
+
+static int Mod_Q3BSP_NativeContentsFromSuperContents(model_t *model, int supercontents)
+{
+ int nativecontents = 0;
+ if (supercontents & SUPERCONTENTS_SOLID)
+ nativecontents |= Q2CONTENTS_SOLID;
+ if (supercontents & SUPERCONTENTS_WATER)
+ nativecontents |= Q2CONTENTS_WATER;
+ if (supercontents & SUPERCONTENTS_SLIME)
+ nativecontents |= Q2CONTENTS_SLIME;
+ if (supercontents & SUPERCONTENTS_LAVA)
+ nativecontents |= Q2CONTENTS_LAVA;
+ return nativecontents;
+}
+
+extern void R_Q3BSP_DrawSky(struct entity_render_s *ent);
+extern void R_Q3BSP_Draw(struct entity_render_s *ent);
+extern void R_Q3BSP_DrawShadowVolume(struct entity_render_s *ent, vec3_t relativelightorigin, float lightradius);
+extern void R_Q3BSP_DrawLight(struct entity_render_s *ent, vec3_t relativelightorigin, vec3_t relativeeyeorigin, float lightradius, float *lightcolor, const matrix4x4_t *matrix_modeltolight, const matrix4x4_t *matrix_modeltoattenuationxyz, const matrix4x4_t *matrix_modeltoattenuationz, rtexture_t *lightcubemap);
+void Mod_Q3BSP_Load(model_t *mod, void *buffer)
+{
+ int i, j;
q3dheader_t *header;
+ float corner[3], yawradius, modelradius;
- mod->type = mod_brushq2;
+ mod->type = mod_brushq3;
+ mod->numframes = 1;
+ mod->numskins = 1;
header = (q3dheader_t *)buffer;
R_ResetQuakeSky();
}
+ mod->soundfromcenter = true;
+ mod->TraceBox = Mod_Q3BSP_TraceBox;
+ mod->brush.SuperContentsFromNativeContents = Mod_Q3BSP_SuperContentsFromNativeContents;
+ mod->brush.NativeContentsFromSuperContents = Mod_Q3BSP_NativeContentsFromSuperContents;
+ mod->brush.GetPVS = Mod_Q3BSP_GetPVS;
+ mod->brush.FatPVS = Mod_Q3BSP_FatPVS;
+ mod->brush.BoxTouchingPVS = Mod_Q3BSP_BoxTouchingPVS;
+ mod->brush.LightPoint = Mod_Q3BSP_LightPoint;
+ mod->brush.FindNonSolidLocation = Mod_Q3BSP_FindNonSolidLocation;
+ //mod->DrawSky = R_Q3BSP_DrawSky;
+ mod->Draw = R_Q3BSP_Draw;
+ mod->DrawShadowVolume = R_Q3BSP_DrawShadowVolume;
+ mod->DrawLight = R_Q3BSP_DrawLight;
+
mod_base = (qbyte *)header;
// swap all the lumps
Mod_Q3BSP_LoadNodes(&header->lumps[Q3LUMP_NODES]);
Mod_Q3BSP_LoadLightGrid(&header->lumps[Q3LUMP_LIGHTGRID]);
Mod_Q3BSP_LoadPVS(&header->lumps[Q3LUMP_PVS]);
+ loadmodel->brush.numsubmodels = loadmodel->brushq3.num_models;
+
+ for (i = 0;i < loadmodel->brushq3.num_models;i++)
+ {
+ if (i == 0)
+ mod = loadmodel;
+ else
+ {
+ char name[10];
+ // LordHavoc: only register submodels if it is the world
+ // (prevents bsp models from replacing world submodels)
+ if (!loadmodel->isworldmodel)
+ continue;
+ // duplicate the basic information
+ sprintf(name, "*%i", i);
+ mod = Mod_FindName(name);
+ *mod = *loadmodel;
+ strcpy(mod->name, name);
+ // textures and memory belong to the main model
+ mod->texturepool = NULL;
+ mod->mempool = NULL;
+ }
+ mod->brushq3.data_thismodel = loadmodel->brushq3.data_models + i;
+ mod->brushq3.submodel = i;
+
+ VectorCopy(mod->brushq3.data_thismodel->mins, mod->normalmins);
+ VectorCopy(mod->brushq3.data_thismodel->maxs, mod->normalmaxs);
+ corner[0] = max(fabs(mod->normalmins[0]), fabs(mod->normalmaxs[0]));
+ corner[1] = max(fabs(mod->normalmins[1]), fabs(mod->normalmaxs[1]));
+ corner[2] = max(fabs(mod->normalmins[2]), fabs(mod->normalmaxs[2]));
+ modelradius = sqrt(corner[0]*corner[0]+corner[1]*corner[1]+corner[2]*corner[2]);
+ yawradius = sqrt(corner[0]*corner[0]+corner[1]*corner[1]);
+ mod->rotatedmins[0] = mod->rotatedmins[1] = mod->rotatedmins[2] = -modelradius;
+ mod->rotatedmaxs[0] = mod->rotatedmaxs[1] = mod->rotatedmaxs[2] = modelradius;
+ mod->yawmaxs[0] = mod->yawmaxs[1] = yawradius;
+ mod->yawmins[0] = mod->yawmins[1] = -yawradius;
+ mod->yawmins[2] = mod->normalmins[2];
+ mod->yawmaxs[2] = mod->normalmaxs[2];
+ mod->radius = modelradius;
+ mod->radius2 = modelradius * modelradius;
+
+ for (j = 0;j < mod->brushq3.data_thismodel->numfaces;j++)
+ if (mod->brushq3.data_thismodel->firstface[j].texture->surfaceflags & Q3SURFACEFLAG_SKY)
+ break;
+ if (j < mod->brushq3.data_thismodel->numfaces)
+ mod->DrawSky = R_Q3BSP_DrawSky;
+ }
}
void Mod_IBSP_Load(model_t *mod, void *buffer)
projects / xonotic / darkplaces.git / blobdiff