//cvar_t r_subdivide_size = {CVAR_SAVE, "r_subdivide_size", "128", "how large water polygons should be (smaller values produce more polygons which give better warping effects)"};
-cvar_t halflifebsp = {0, "halflifebsp", "0", "indicates the current map is hlbsp format (useful to know because of different bounding box sizes)"};
cvar_t r_novis = {0, "r_novis", "0", "draws whole level, see also sv_cullentities_pvs 0"};
cvar_t r_picmipworld = {CVAR_SAVE, "r_picmipworld", "1", "whether gl_picmip shall apply to world textures too"};
cvar_t r_nosurftextures = {0, "r_nosurftextures", "0", "pretends there was no texture lump found in the q1bsp/hlbsp loading (useful for debugging this rare case)"};
cvar_t r_subdivisions_tolerance = {0, "r_subdivisions_tolerance", "4", "maximum error tolerance on curve subdivision for rendering purposes (in other words, the curves will be given as many polygons as necessary to represent curves at this quality)"};
-cvar_t r_subdivisions_mintess = {0, "r_subdivisions_mintess", "1", "minimum number of subdivisions (values above 1 will smooth curves that don't need it)"};
+cvar_t r_subdivisions_mintess = {0, "r_subdivisions_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
cvar_t r_subdivisions_maxtess = {0, "r_subdivisions_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
cvar_t r_subdivisions_maxvertices = {0, "r_subdivisions_maxvertices", "65536", "maximum vertices allowed per subdivided curve"};
cvar_t r_subdivisions_collision_tolerance = {0, "r_subdivisions_collision_tolerance", "15", "maximum error tolerance on curve subdivision for collision purposes (usually a larger error tolerance than for rendering)"};
-cvar_t r_subdivisions_collision_mintess = {0, "r_subdivisions_collision_mintess", "1", "minimum number of subdivisions (values above 1 will smooth curves that don't need it)"};
+cvar_t r_subdivisions_collision_mintess = {0, "r_subdivisions_collision_mintess", "0", "minimum number of subdivisions (values above 0 will smooth curves that don't need it)"};
cvar_t r_subdivisions_collision_maxtess = {0, "r_subdivisions_collision_maxtess", "1024", "maximum number of subdivisions (prevents curves beyond a certain detail level, limits smoothing)"};
cvar_t r_subdivisions_collision_maxvertices = {0, "r_subdivisions_collision_maxvertices", "4225", "maximum vertices allowed per subdivided curve"};
cvar_t mod_q3bsp_curves_collisions = {0, "mod_q3bsp_curves_collisions", "1", "enables collisions with curves (SLOW)"};
cvar_t mod_q3bsp_optimizedtraceline = {0, "mod_q3bsp_optimizedtraceline", "1", "whether to use optimized traceline code for line traces (as opposed to tracebox code)"};
cvar_t mod_q3bsp_debugtracebrush = {0, "mod_q3bsp_debugtracebrush", "0", "selects different tracebrush bsp recursion algorithms (for debugging purposes only)"};
cvar_t mod_q3bsp_lightmapmergepower = {CVAR_SAVE, "mod_q3bsp_lightmapmergepower", "4", "merges the quake3 128x128 lightmap textures into larger lightmap group textures to speed up rendering, 1 = 256x256, 2 = 512x512, 3 = 1024x1024, 4 = 2048x2048, 5 = 4096x4096, ..."};
+cvar_t mod_q3bsp_nolightmaps = {CVAR_SAVE, "mod_q3bsp_nolightmaps", "0", "do not load lightmaps in Q3BSP maps (to save video RAM, but be warned: it looks ugly)"};
static texture_t mod_q1bsp_texture_solid;
static texture_t mod_q1bsp_texture_sky;
void Mod_BrushInit(void)
{
// Cvar_RegisterVariable(&r_subdivide_size);
- Cvar_RegisterVariable(&halflifebsp);
Cvar_RegisterVariable(&r_novis);
Cvar_RegisterVariable(&r_picmipworld);
Cvar_RegisterVariable(&r_nosurftextures);
Cvar_RegisterVariable(&mod_q3bsp_optimizedtraceline);
Cvar_RegisterVariable(&mod_q3bsp_debugtracebrush);
Cvar_RegisterVariable(&mod_q3bsp_lightmapmergepower);
+ Cvar_RegisterVariable(&mod_q3bsp_nolightmaps);
memset(&mod_q1bsp_texture_solid, 0, sizeof(mod_q1bsp_texture_solid));
strlcpy(mod_q1bsp_texture_solid.name, "solid" , sizeof(mod_q1bsp_texture_solid.name));
tx->skinframerate = 1;
tx->skinframes[0] = skinframe;
tx->currentskinframe = tx->skinframes[0];
- tx->basematerialflags = 0;
}
tx->basematerialflags = MATERIALFLAG_WALL;
if (i == loadmodel->num_textures - 1)
// copy name, but only up to 16 characters
// (the output buffer can hold more than this, but the input buffer is
// only 16)
- for (j = 0;dmiptex->name[j] && j < 16;j++)
+ for (j = 0;j < 16 && dmiptex->name[j];j++)
name[j] = dmiptex->name[j];
name[j] = 0;
if (!name[0])
{
- sprintf(name, "unnamed%i", i);
+ dpsnprintf(name, sizeof(name), "unnamed%i", i);
Con_DPrintf("%s: warning: renaming unnamed texture to %s\n", loadmodel->name, name);
}
// LordHavoc: HL sky textures are entirely different than quake
if (!loadmodel->brush.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
{
- if (loadmodel->isworldmodel)
+ data = loadimagepixelsbgra(tx->name, false, false);
+ if (data && image_width == 256 && image_height == 128)
{
- data = loadimagepixelsbgra(tx->name, false, false);
- if (data && image_width == 256 && image_height == 128)
- {
- R_Q1BSP_LoadSplitSky(data, image_width, image_height, 4);
- Mem_Free(data);
- }
- else if (mtdata != NULL)
- R_Q1BSP_LoadSplitSky(mtdata, mtwidth, mtheight, 1);
+ R_Q1BSP_LoadSplitSky(data, image_width, image_height, 4);
+ Mem_Free(data);
}
+ else if (mtdata != NULL)
+ R_Q1BSP_LoadSplitSky(mtdata, mtwidth, mtheight, 1);
}
else
{
- skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s/%s", mapname, tx->name), TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS, false);
+ skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s/%s", mapname, tx->name), TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS, false);
if (!skinframe)
- skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s", tx->name), TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS, false);
+ skinframe = R_SkinFrame_LoadExternal(gamemode == GAME_TENEBRAE ? tx->name : va("textures/%s", tx->name), TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS, false);
if (!skinframe)
{
// did not find external texture, load it from the bsp or wad3
{
tx->width = image_width;
tx->height = image_height;
- skinframe = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0), pixels, image_width, image_height);
+ skinframe = R_SkinFrame_LoadInternalBGRA(tx->name, TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0), pixels, image_width, image_height);
}
if (freepixels)
Mem_Free(freepixels);
}
else if (mtdata) // texture included
- skinframe = R_SkinFrame_LoadInternalQuake(tx->name, TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0), false, r_fullbrights.integer, mtdata, tx->width, tx->height);
+ skinframe = R_SkinFrame_LoadInternalQuake(tx->name, TEXF_ALPHA | TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0), false, r_fullbrights.integer, mtdata, tx->width, tx->height);
}
// if skinframe is still NULL the "missing" texture will be used
if (skinframe)
else if (!strncmp(tx->name, "sky", 3))
tx->basematerialflags = MATERIALFLAG_SKY | MATERIALFLAG_NOSHADOW;
else if (!strcmp(tx->name, "caulk"))
- tx->basematerialflags = MATERIALFLAG_NODRAW;
+ tx->basematerialflags = MATERIALFLAG_NODRAW | MATERIALFLAG_NOSHADOW;
else if (tx->skinframes[0] && tx->skinframes[0]->fog)
tx->basematerialflags |= MATERIALFLAG_ALPHA | MATERIALFLAG_BLENDED | MATERIALFLAG_NOSHADOW;
static void Mod_Q1BSP_ParseWadsFromEntityLump(const char *data)
{
char key[128], value[4096];
- char wadname[128];
int i, j, k;
if (!data)
return;
{
k = value[i];
value[i] = 0;
- strlcpy(wadname, "textures/", sizeof(wadname));
- strlcat(wadname, &value[j], sizeof(wadname));
- W_LoadTextureWadFile(wadname, false);
+ W_LoadTextureWadFile(&value[j], false);
j = i+1;
if (!k)
break;
loadmodel->brush.entities = NULL;
if (!l->filelen)
return;
- loadmodel->brush.entities = (char *)Mem_Alloc(loadmodel->mempool, l->filelen);
+ loadmodel->brush.entities = (char *)Mem_Alloc(loadmodel->mempool, l->filelen + 1);
memcpy(loadmodel->brush.entities, mod_base + l->fileofs, l->filelen);
+ loadmodel->brush.entities[l->filelen] = 0;
if (loadmodel->brush.ishlbsp)
Mod_Q1BSP_ParseWadsFromEntityLump(loadmodel->brush.entities);
}
loadmodel->num_surfaces = count;
+ loadmodel->brushq1.lightmapupdateflags = (unsigned char *)Mem_Alloc(loadmodel->mempool, count*sizeof(unsigned char));
+
totalverts = 0;
totaltris = 0;
for (surfacenum = 0, in = (dface_t *)(mod_base + l->fileofs);surfacenum < count;surfacenum++, in++)
// additionally this is used by the later code to see if a
// lightmap is needed on this surface (rather than duplicating the
// logic above)
- surface->cached_dlight = true;
+ loadmodel->brushq1.lightmapupdateflags[surfacenum] = true;
}
}
for (surfacenum = 0, surface = loadmodel->data_surfaces;surfacenum < count;surfacenum++, surface++)
{
- int i, iu, iv, lightmapx, lightmapy;
+ int i, iu, iv, lightmapx = 0, lightmapy = 0;
float u, v, ubase, vbase, uscale, vscale;
smax = surface->lightmapinfo->extents[0] >> 4;
dheader_t *header;
dmodel_t *bm;
mempool_t *mainmempool;
- float dist, modelyawradius, modelradius, *vec;
+ float dist, modelyawradius, modelradius;
msurface_t *surface;
int numshadowmeshtriangles;
hullinfo_t hullinfo;
mod->brush.AmbientSoundLevelsForPoint = Mod_Q1BSP_AmbientSoundLevelsForPoint;
mod->brush.RoundUpToHullSize = Mod_Q1BSP_RoundUpToHullSize;
mod->brush.PointInLeaf = Mod_Q1BSP_PointInLeaf;
-
- if (loadmodel->isworldmodel)
- Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
+ mod->Draw = R_Q1BSP_Draw;
+ mod->DrawDepth = R_Q1BSP_DrawDepth;
+ mod->DrawDebug = R_Q1BSP_DrawDebug;
+ mod->GetLightInfo = R_Q1BSP_GetLightInfo;
+ mod->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
+ mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
+ mod->DrawLight = R_Q1BSP_DrawLight;
// load into heap
if (i > 0)
{
char name[10];
- // LordHavoc: only register submodels if it is the world
- // (prevents external bsp models from replacing world submodels with
- // their own)
- if (!loadmodel->isworldmodel)
- continue;
// duplicate the basic information
- sprintf(name, "*%i", i);
- mod = Mod_FindName(name);
+ dpsnprintf(name, sizeof(name), "*%i", i);
+ mod = Mod_FindName(name, loadmodel->name);
// copy the base model to this one
*mod = *loadmodel;
// rename the clone back to its proper name
strlcpy(mod->name, name, sizeof(mod->name));
+ mod->brush.parentmodel = loadmodel;
// textures and memory belong to the main model
mod->texturepool = NULL;
mod->mempool = NULL;
+ mod->brush.TraceLineOfSight = NULL;
+ mod->brush.GetPVS = NULL;
+ mod->brush.FatPVS = NULL;
+ mod->brush.BoxTouchingPVS = NULL;
+ mod->brush.BoxTouchingLeafPVS = NULL;
+ mod->brush.BoxTouchingVisibleLeafs = NULL;
+ mod->brush.FindBoxClusters = NULL;
+ mod->brush.LightPoint = NULL;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
}
mod->brush.submodel = i;
mod->nummodelsurfaces = bm->numfaces;
// make the model surface list (used by shadowing/lighting)
- mod->surfacelist = (int *)datapointer;datapointer += mod->nummodelsurfaces * sizeof(int);
- for (j = 0;j < mod->nummodelsurfaces;j++)
- mod->surfacelist[j] = mod->firstmodelsurface + j;
+ mod->sortedmodelsurfaces = (int *)datapointer;datapointer += mod->nummodelsurfaces * sizeof(int);
+ Mod_MakeSortedSurfaces(mod);
- // this gets altered below if sky or water is used
- mod->DrawSky = NULL;
- mod->DrawAddWaterPlanes = NULL;
- mod->Draw = R_Q1BSP_Draw;
- mod->DrawDepth = R_Q1BSP_DrawDepth;
- mod->DrawDebug = R_Q1BSP_DrawDebug;
- mod->GetLightInfo = R_Q1BSP_GetLightInfo;
- mod->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
- mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
- mod->DrawLight = R_Q1BSP_DrawLight;
- if (i != 0)
- {
- mod->brush.TraceLineOfSight = NULL;
- mod->brush.GetPVS = NULL;
- mod->brush.FatPVS = NULL;
- mod->brush.BoxTouchingPVS = NULL;
- mod->brush.BoxTouchingLeafPVS = NULL;
- mod->brush.BoxTouchingVisibleLeafs = NULL;
- mod->brush.FindBoxClusters = NULL;
- mod->brush.LightPoint = NULL;
- mod->brush.AmbientSoundLevelsForPoint = NULL;
- }
// copy the submodel bounds, then enlarge the yaw and rotated bounds according to radius
+ // (previously this code measured the radius of the vertices of surfaces in the submodel, but that broke submodels that contain only CLIP brushes, which do not produce surfaces)
VectorCopy(bm->mins, mod->normalmins);
VectorCopy(bm->maxs, mod->normalmaxs);
- VectorCopy(bm->mins, mod->yawmins);
- VectorCopy(bm->maxs, mod->yawmaxs);
- VectorCopy(bm->mins, mod->rotatedmins);
- VectorCopy(bm->maxs, mod->rotatedmaxs);
+ dist = max(fabs(mod->normalmins[0]), fabs(mod->normalmaxs[0]));
+ modelyawradius = max(fabs(mod->normalmins[1]), fabs(mod->normalmaxs[1]));
+ modelyawradius = dist*dist+modelyawradius*modelyawradius;
+ modelradius = max(fabs(mod->normalmins[2]), fabs(mod->normalmaxs[2]));
+ modelradius = modelyawradius + modelradius * modelradius;
+ modelyawradius = sqrt(modelyawradius);
+ modelradius = sqrt(modelradius);
+ mod->yawmins[0] = mod->yawmins[1] = -modelyawradius;
+ mod->yawmins[2] = mod->normalmins[2];
+ mod->yawmaxs[0] = mod->yawmaxs[1] = modelyawradius;
+ mod->yawmaxs[2] = mod->normalmaxs[2];
+ mod->rotatedmins[0] = mod->rotatedmins[1] = mod->rotatedmins[2] = -modelradius;
+ mod->rotatedmaxs[0] = mod->rotatedmaxs[1] = mod->rotatedmaxs[2] = modelradius;
+ mod->radius = modelradius;
+ mod->radius2 = modelradius * modelradius;
+
+ // this gets altered below if sky or water is used
+ mod->DrawSky = NULL;
+ mod->DrawAddWaterPlanes = NULL;
+
+ // scan surfaces for sky and water and flag the submodel as possessing these features or not
+ // build lightstyle lists for quick marking of dirty lightmaps when lightstyles flicker
if (mod->nummodelsurfaces)
{
- modelyawradius = 0;
- modelradius = 0;
for (j = 0, surface = &mod->data_surfaces[mod->firstmodelsurface];j < mod->nummodelsurfaces;j++, surface++)
- {
- // we only need to have a drawsky function if it is used(usually only on world model)
if (surface->texture->basematerialflags & MATERIALFLAG_SKY)
- mod->DrawSky = R_Q1BSP_DrawSky;
+ break;
+ if (j < mod->nummodelsurfaces)
+ mod->DrawSky = R_Q1BSP_DrawSky;
+
+ for (j = 0, surface = &mod->data_surfaces[mod->firstmodelsurface];j < mod->nummodelsurfaces;j++, surface++)
if (surface->texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION))
- mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
- // calculate bounding shapes
- for (k = 0, vec = (loadmodel->surfmesh.data_vertex3f + 3 * surface->num_firstvertex);k < surface->num_vertices;k++, vec += 3)
- {
- dist = vec[0]*vec[0]+vec[1]*vec[1];
- if (modelyawradius < dist)
- modelyawradius = dist;
- dist += vec[2]*vec[2];
- if (modelradius < dist)
- modelradius = dist;
- }
- }
- modelyawradius = sqrt(modelyawradius);
- modelradius = sqrt(modelradius);
- mod->yawmins[0] = min(mod->yawmins[0], -modelyawradius);
- mod->yawmaxs[0] = min(mod->yawmaxs[0], -modelyawradius);
- mod->yawmins[1] = min(mod->yawmins[1], modelyawradius);
- mod->yawmaxs[1] = min(mod->yawmaxs[1], modelyawradius);
- mod->rotatedmins[0] = min(mod->rotatedmins[0], -modelradius);
- mod->rotatedmaxs[0] = min(mod->rotatedmaxs[0], modelradius);
- mod->rotatedmins[1] = min(mod->rotatedmins[1], -modelradius);
- mod->rotatedmaxs[1] = min(mod->rotatedmaxs[1], modelradius);
- mod->rotatedmins[2] = min(mod->rotatedmins[2], -modelradius);
- mod->rotatedmaxs[2] = min(mod->rotatedmaxs[2], modelradius);
- mod->radius = modelradius;
- mod->radius2 = modelradius * modelradius;
+ break;
+ if (j < mod->nummodelsurfaces)
+ mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
// build lightstyle update chains
- // (used to rapidly mark surface->cached_dlight on many surfaces
+ // (used to rapidly mark lightmapupdateflags on many surfaces
// when d_lightstylevalue changes)
memset(stylecounts, 0, sizeof(stylecounts));
for (k = 0;k < mod->nummodelsurfaces;k++)
i = LittleLong(header->version);
if (i != Q2BSPVERSION)
Host_Error("Mod_Q2BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q2BSPVERSION);
- mod->brush.ishlbsp = false;
- if (loadmodel->isworldmodel)
- Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
mod_base = (unsigned char *)header;
loadmodel->brushq3.num_lightgrid_cellsize[2] = 128;
if (!l->filelen)
return;
- loadmodel->brush.entities = (char *)Mem_Alloc(loadmodel->mempool, l->filelen);
+ loadmodel->brush.entities = (char *)Mem_Alloc(loadmodel->mempool, l->filelen + 1);
memcpy(loadmodel->brush.entities, mod_base + l->fileofs, l->filelen);
+ loadmodel->brush.entities[l->filelen] = 0;
data = loadmodel->brush.entities;
// some Q3 maps override the lightgrid_cellsize with a worldspawn key
if (data && COM_ParseToken_Simple(&data, false, false) && com_token[0] == '{')
strlcpy(value, com_token, sizeof(value));
if (!strcmp("gridsize", key))
{
+#if _MSC_VER >= 1400
+#define sscanf sscanf_s
+#endif
if (sscanf(value, "%f %f %f", &v[0], &v[1], &v[2]) == 3 && v[0] != 0 && v[1] != 0 && v[2] != 0)
VectorCopy(v, loadmodel->brushq3.num_lightgrid_cellsize);
}
return;
for (i = 0;i < count;i++, in++, out++)
- Mod_LoadTextureFromQ3Shader(out, out->name, true, true, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS);
+ Mod_LoadTextureFromQ3Shader(out, out->name, true, true, TEXF_MIPMAP | TEXF_PRECACHE | (r_picmipworld.integer ? TEXF_PICMIP : 0) | TEXF_COMPRESS);
}
static void Mod_Q3BSP_LoadPlanes(lump_t *l)
}
}
+static void Mod_Q3BSP_LoadBrushSides_IG(lump_t *l)
+{
+ q3dbrushside_ig_t *in;
+ q3mbrushside_t *out;
+ int i, n, count;
+
+ in = (q3dbrushside_ig_t *)(mod_base + l->fileofs);
+ if (l->filelen % sizeof(*in))
+ Host_Error("Mod_Q3BSP_LoadBrushSides: funny lump size in %s",loadmodel->name);
+ count = l->filelen / sizeof(*in);
+ out = (q3mbrushside_t *)Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
+
+ loadmodel->brush.data_brushsides = out;
+ loadmodel->brush.num_brushsides = count;
+
+ for (i = 0;i < count;i++, in++, out++)
+ {
+ n = LittleLong(in->planeindex);
+ if (n < 0 || n >= loadmodel->brush.num_planes)
+ Host_Error("Mod_Q3BSP_LoadBrushSides: invalid planeindex %i (%i planes)", n, loadmodel->brush.num_planes);
+ out->plane = loadmodel->brush.data_planes + n;
+ n = LittleLong(in->textureindex);
+ if (n < 0 || n >= loadmodel->num_textures)
+ Host_Error("Mod_Q3BSP_LoadBrushSides: invalid textureindex %i (%i textures)", n, loadmodel->num_textures);
+ out->texture = loadmodel->data_textures + n;
+ }
+}
+
static void Mod_Q3BSP_LoadBrushes(lump_t *l)
{
q3dbrush_t *in;
}
// make the colbrush from the planes
out->colbrushf = Collision_NewBrushFromPlanes(loadmodel->mempool, out->numbrushsides, planes, out->texture->supercontents);
+
+ // this whole loop can take a while (e.g. on redstarrepublic4)
+ CL_KeepaliveMessage(false);
}
if (planes)
Mem_Free(planes);
static void Mod_Q3BSP_LoadLightmaps(lump_t *l, lump_t *faceslump)
{
- q3dlightmap_t *in;
+ q3dlightmap_t *input_pointer;
int i, j, k, count, power, power2, mask, endlightmap, mergewidth, mergeheight;
unsigned char *c;
- unsigned char convertedpixels[128*128*4];
- if (!l->filelen)
- return;
+ unsigned char *convertedpixels;
+ char mapname[MAX_QPATH];
+ int size, bytesperpixel, rgbmap[3];
+ qboolean external;
+ unsigned char *inpixels[10000]; // max count q3map2 can output (it uses 4 digits)
+
+ // defaults for q3bsp
+ size = 128;
+ bytesperpixel = 3;
+ rgbmap[0] = 2;
+ rgbmap[1] = 1;
+ rgbmap[2] = 0;
+ external = false;
+ loadmodel->brushq3.lightmapsize = 128;
+
if (cls.state == ca_dedicated)
return;
- in = (q3dlightmap_t *)(mod_base + l->fileofs);
- if (l->filelen % sizeof(*in))
- Host_Error("Mod_Q3BSP_LoadLightmaps: funny lump size in %s",loadmodel->name);
- count = l->filelen / sizeof(*in);
+
+ if(mod_q3bsp_nolightmaps.integer)
+ {
+ return;
+ }
+ else if(l->filelen)
+ {
+ // prefer internal LMs for compatibility (a BSP contains no info on whether external LMs exist)
+ if (developer_loading.integer)
+ Con_Printf("Using internal lightmaps\n");
+ input_pointer = (q3dlightmap_t *)(mod_base + l->fileofs);
+ if (l->filelen % sizeof(*input_pointer))
+ Host_Error("Mod_Q3BSP_LoadLightmaps: funny lump size in %s",loadmodel->name);
+ count = l->filelen / sizeof(*input_pointer);
+ for(i = 0; i < count; ++i)
+ inpixels[i] = input_pointer[i].rgb;
+ }
+ else
+ {
+ // no internal lightmaps
+ // try external lightmaps
+ if (developer_loading.integer)
+ Con_Printf("Using external lightmaps\n");
+ FS_StripExtension(loadmodel->name, mapname, sizeof(mapname));
+ inpixels[0] = loadimagepixelsbgra(va("%s/lm_%04d", mapname, 0), false, false);
+ if(!inpixels[0])
+ return;
+
+ // using EXTERNAL lightmaps instead
+ if(image_width != (int) CeilPowerOf2(image_width) || image_width != image_height)
+ {
+ Mem_Free(inpixels[0]);
+ Host_Error("Mod_Q3BSP_LoadLightmaps: invalid external lightmap size in %s",loadmodel->name);
+ }
+
+ size = image_width;
+ bytesperpixel = 4;
+ rgbmap[0] = 0;
+ rgbmap[1] = 1;
+ rgbmap[2] = 2;
+ external = true;
+
+ for(count = 1; ; ++count)
+ {
+ inpixels[count] = loadimagepixelsbgra(va("%s/lm_%04d", mapname, count), false, false);
+ if(!inpixels[count])
+ break; // we got all of them
+ if(image_width != size || image_height != size)
+ {
+ for(i = 0; i <= count; ++i)
+ Mem_Free(inpixels[i]);
+ Host_Error("Mod_Q3BSP_LoadLightmaps: invalid external lightmap size in %s",loadmodel->name);
+ }
+ }
+ }
+
+ convertedpixels = (unsigned char *) Mem_Alloc(tempmempool, size*size*4);
+ loadmodel->brushq3.lightmapsize = size;
loadmodel->brushq3.num_originallightmaps = count;
// now check the surfaces to see if any of them index an odd numbered
// blank lightmaps, which must be handled properly as well
if (endlightmap == 1 && count > 1)
{
- c = in[1].rgb;
- for (i = 0;i < 128*128*3;i++)
- if (c[i])
+ c = inpixels[1];
+ for (i = 0;i < size*size;i++)
+ {
+ if (c[bytesperpixel*i + rgbmap[0]])
break;
- if (i == 128*128*3)
+ if (c[bytesperpixel*i + rgbmap[1]])
+ break;
+ if (c[bytesperpixel*i + rgbmap[2]])
+ break;
+ }
+ if (i == size*size)
{
// all pixels in the unused lightmap were black...
loadmodel->brushq3.deluxemapping = false;
loadmodel->brushq3.num_lightmapmergepower = 0;
for (power = 1;power <= mod_q3bsp_lightmapmergepower.integer && (128 << power) <= gl_max_texture_size && (1 << (power * 2)) < 4 * (count >> loadmodel->brushq3.deluxemapping);power++)
loadmodel->brushq3.num_lightmapmergepower = power;
+
+ // as the lightmap size may actually be another power of 2, adjust for this
+ // (and interpret it as the power for 128x128 lightmaps above)
+ for(i = 0; (128 << i) < size; ++i)
+ loadmodel->brushq3.num_lightmapmergepower -= 1;
+ if(loadmodel->brushq3.num_lightmapmergepower < 0)
+ loadmodel->brushq3.num_lightmapmergepower = 0;
+
loadmodel->brushq3.num_lightmapmerge = 1 << loadmodel->brushq3.num_lightmapmergepower;
loadmodel->brushq3.num_mergedlightmaps = ((count >> loadmodel->brushq3.deluxemapping) + (1 << (loadmodel->brushq3.num_lightmapmergepower * 2)) - 1) >> (loadmodel->brushq3.num_lightmapmergepower * 2);
{
// figure out which merged lightmap texture this fits into
int lightmapindex = i >> (loadmodel->brushq3.deluxemapping + power2);
- for (k = 0;k < 128*128;k++)
+ for (k = 0;k < size*size;k++)
{
- convertedpixels[k*4+2] = in[i].rgb[k*3+0];
- convertedpixels[k*4+1] = in[i].rgb[k*3+1];
- convertedpixels[k*4+0] = in[i].rgb[k*3+2];
+ convertedpixels[k*4+0] = inpixels[i][k*bytesperpixel+rgbmap[0]];
+ convertedpixels[k*4+1] = inpixels[i][k*bytesperpixel+rgbmap[1]];
+ convertedpixels[k*4+2] = inpixels[i][k*bytesperpixel+rgbmap[2]];
convertedpixels[k*4+3] = 255;
}
if (loadmodel->brushq3.num_lightmapmergepower > 0)
if (!loadmodel->brushq3.data_lightmaps[lightmapindex])
{
// create a lightmap only as large as necessary to hold the
- // remaining 128x128 blocks
+ // remaining size*size blocks
// if there are multiple merged lightmap textures then they will
// all be full size except the last one which may be smaller
// because it only needs to the remaining blocks, and it will often
for (mergeheight = 1;mergewidth*mergeheight < j && mergeheight < (1 << power);mergeheight *= 2)
;
if (developer_loading.integer)
- Con_Printf("lightmap merge texture #%i is %ix%i (%i of %i used)\n", lightmapindex, mergewidth*128, mergeheight*128, min(j, mergewidth*mergeheight), mergewidth*mergeheight);
- loadmodel->brushq3.data_lightmaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), mergewidth * 128, mergeheight * 128, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), NULL);
+ Con_Printf("lightmap merge texture #%i is %ix%i (%i of %i used)\n", lightmapindex, mergewidth*size, mergeheight*size, min(j, mergewidth*mergeheight), mergewidth*mergeheight);
+ loadmodel->brushq3.data_lightmaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), mergewidth * size, mergeheight * size, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), NULL);
if (loadmodel->brushq3.data_deluxemaps)
- loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), mergewidth * 128, mergeheight * 128, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), NULL);
+ loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), mergewidth * size, mergeheight * size, NULL, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), NULL);
}
- mergewidth = R_TextureWidth(loadmodel->brushq3.data_lightmaps[lightmapindex]) / 128;
- mergeheight = R_TextureHeight(loadmodel->brushq3.data_lightmaps[lightmapindex]) / 128;
+ mergewidth = R_TextureWidth(loadmodel->brushq3.data_lightmaps[lightmapindex]) / size;
+ mergeheight = R_TextureHeight(loadmodel->brushq3.data_lightmaps[lightmapindex]) / size;
j = (i >> loadmodel->brushq3.deluxemapping) & ((1 << power2) - 1);
if (loadmodel->brushq3.deluxemapping && (i & 1))
- R_UpdateTexture(loadmodel->brushq3.data_deluxemaps[lightmapindex], convertedpixels, (j % mergewidth) * 128, (j / mergewidth) * 128, 128, 128);
+ R_UpdateTexture(loadmodel->brushq3.data_deluxemaps[lightmapindex], convertedpixels, (j % mergewidth) * size, (j / mergewidth) * size, size, size);
else
- R_UpdateTexture(loadmodel->brushq3.data_lightmaps [lightmapindex], convertedpixels, (j % mergewidth) * 128, (j / mergewidth) * 128, 128, 128);
+ R_UpdateTexture(loadmodel->brushq3.data_lightmaps [lightmapindex], convertedpixels, (j % mergewidth) * size, (j / mergewidth) * size, size, size);
}
else
{
// figure out which merged lightmap texture this fits into
if (loadmodel->brushq3.deluxemapping && (i & 1))
- loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), 128, 128, convertedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), NULL);
+ loadmodel->brushq3.data_deluxemaps[lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("deluxemap%04i", lightmapindex), size, size, convertedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bspdeluxemaps.integer ? TEXF_COMPRESS : 0), NULL);
else
- loadmodel->brushq3.data_lightmaps [lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), 128, 128, convertedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), NULL);
+ loadmodel->brushq3.data_lightmaps [lightmapindex] = R_LoadTexture2D(loadmodel->texturepool, va("lightmap%04i", lightmapindex), size, size, convertedpixels, TEXTYPE_BGRA, TEXF_FORCELINEAR | TEXF_PRECACHE | (gl_texturecompression_q3bsplightmaps.integer ? TEXF_COMPRESS : 0), NULL);
}
}
+
+ Mem_Free(convertedpixels);
+ if(external)
+ {
+ for(i = 0; i < count; ++i)
+ Mem_Free(inpixels[i]);
+ }
}
+typedef struct patchtess_s
+{
+ patchinfo_t info;
+
+ // Auxiliary data used only by patch loading code in Mod_Q3BSP_LoadFaces
+ int surface_id;
+ float lodgroup[6];
+ float *originalvertex3f;
+} patchtess_t;
+
+#define PATCHTESS_SAME_LODGROUP(a,b) \
+ ( \
+ (a).lodgroup[0] == (b).lodgroup[0] && \
+ (a).lodgroup[1] == (b).lodgroup[1] && \
+ (a).lodgroup[2] == (b).lodgroup[2] && \
+ (a).lodgroup[3] == (b).lodgroup[3] && \
+ (a).lodgroup[4] == (b).lodgroup[4] && \
+ (a).lodgroup[5] == (b).lodgroup[5] \
+ )
+
static void Mod_Q3BSP_LoadFaces(lump_t *l)
{
q3dface_t *in, *oldin;
msurface_t *out, *oldout;
- int i, oldi, j, n, count, invalidelements, patchsize[2], finalwidth, finalheight, xtess, ytess, finalvertices, finaltriangles, firstvertex, firstelement, type, oldnumtriangles, oldnumtriangles2, meshvertices, meshtriangles, numvertices, numtriangles;
+ int i, oldi, j, n, count, invalidelements, patchsize[2], finalwidth, finalheight, xtess, ytess, finalvertices, finaltriangles, firstvertex, firstelement, type, oldnumtriangles, oldnumtriangles2, meshvertices, meshtriangles, numvertices, numtriangles, cxtess, cytess;
float lightmaptcbase[2], lightmaptcscale[2];
//int *originalelement3i;
//int *originalneighbor3i;
float *originaltexcoordtexture2f;
float *originaltexcoordlightmap2f;
float *v;
+ patchtess_t *patchtess = NULL;
+ int patchtesscount = 0;
+ qboolean again;
in = (q3dface_t *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
loadmodel->data_surfaces = out;
loadmodel->num_surfaces = count;
+ if(count > 0)
+ patchtess = (patchtess_t*) Mem_Alloc(tempmempool, count * sizeof(*patchtess));
+
i = 0;
oldi = i;
oldin = in;
n = -1;
else if (n >= loadmodel->brushq3.num_originallightmaps)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid lightmapindex %i (%i lightmaps)\n", i, out->texture->name, n, loadmodel->brushq3.num_originallightmaps);
+ if(loadmodel->brushq3.num_originallightmaps != 0)
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid lightmapindex %i (%i lightmaps)\n", i, out->texture->name, n, loadmodel->brushq3.num_originallightmaps);
n = -1;
}
else
continue;
}
originalvertex3f = loadmodel->brushq3.data_vertex3f + firstvertex * 3;
+
// convert patch to Q3FACETYPE_MESH
xtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
ytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
xtess = bound(r_subdivisions_mintess.integer, xtess, r_subdivisions_maxtess.integer);
ytess = bound(r_subdivisions_mintess.integer, ytess, r_subdivisions_maxtess.integer);
// bound to sanity settings
- xtess = bound(1, xtess, 1024);
- ytess = bound(1, ytess, 1024);
- // bound to user limit on vertices
- while ((xtess > 1 || ytess > 1) && (((patchsize[0] - 1) * xtess) + 1) * (((patchsize[1] - 1) * ytess) + 1) > min(r_subdivisions_maxvertices.integer, 262144))
- {
- if (xtess > ytess)
- xtess--;
- else
- ytess--;
- }
- finalwidth = ((patchsize[0] - 1) * xtess) + 1;
- finalheight = ((patchsize[1] - 1) * ytess) + 1;
- numvertices = finalwidth * finalheight;
- numtriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+ xtess = bound(0, xtess, 1024);
+ ytess = bound(0, ytess, 1024);
+
+ // lower quality collision patches! Same procedure as before, but different cvars
+ // convert patch to Q3FACETYPE_MESH
+ cxtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_collision_tolerance.value);
+ cytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_collision_tolerance.value);
+ // bound to user settings
+ cxtess = bound(r_subdivisions_collision_mintess.integer, cxtess, r_subdivisions_collision_maxtess.integer);
+ cytess = bound(r_subdivisions_collision_mintess.integer, cytess, r_subdivisions_collision_maxtess.integer);
+ // bound to sanity settings
+ cxtess = bound(0, cxtess, 1024);
+ cytess = bound(0, cytess, 1024);
+
+ // store it for the LOD grouping step
+ patchtess[patchtesscount].info.xsize = patchsize[0];
+ patchtess[patchtesscount].info.ysize = patchsize[1];
+ patchtess[patchtesscount].info.lods[PATCH_LOD_VISUAL].xtess = xtess;
+ patchtess[patchtesscount].info.lods[PATCH_LOD_VISUAL].ytess = ytess;
+ patchtess[patchtesscount].info.lods[PATCH_LOD_COLLISION].xtess = cxtess;
+ patchtess[patchtesscount].info.lods[PATCH_LOD_COLLISION].ytess = cytess;
+
+ patchtess[patchtesscount].surface_id = i;
+ patchtess[patchtesscount].lodgroup[0] = in->specific.patch.mins[0];
+ patchtess[patchtesscount].lodgroup[1] = in->specific.patch.mins[1];
+ patchtess[patchtesscount].lodgroup[2] = in->specific.patch.mins[2];
+ patchtess[patchtesscount].lodgroup[3] = in->specific.patch.maxs[0];
+ patchtess[patchtesscount].lodgroup[4] = in->specific.patch.maxs[1];
+ patchtess[patchtesscount].lodgroup[5] = in->specific.patch.maxs[2];
+ patchtess[patchtesscount].originalvertex3f = originalvertex3f;
+ ++patchtesscount;
break;
case Q3FACETYPE_FLARE:
if (developer.integer >= 100)
meshtriangles += out->num_triangles;
}
+ // Fix patches tesselations so that they make no seams
+ do
+ {
+ again = false;
+ for(i = 0; i < patchtesscount; ++i)
+ {
+ for(j = i+1; j < patchtesscount; ++j)
+ {
+ if (!PATCHTESS_SAME_LODGROUP(patchtess[i], patchtess[j]))
+ continue;
+
+ if (Q3PatchAdjustTesselation(3, &patchtess[i].info, patchtess[i].originalvertex3f, &patchtess[j].info, patchtess[j].originalvertex3f) )
+ again = true;
+ }
+ }
+ }
+ while (again);
+
+ // Calculate resulting number of triangles
+ for(i = 0; i < patchtesscount; ++i)
+ {
+ finalwidth = Q3PatchDimForTess(patchtess[i].info.xsize, patchtess[i].info.lods[PATCH_LOD_VISUAL].xtess);
+ finalheight = Q3PatchDimForTess(patchtess[i].info.ysize,patchtess[i].info.lods[PATCH_LOD_VISUAL].ytess);
+ numvertices = finalwidth * finalheight;
+ numtriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+
+ oldout[patchtess[i].surface_id].num_vertices = numvertices;
+ oldout[patchtess[i].surface_id].num_triangles = numtriangles;
+ meshvertices += oldout[patchtess[i].surface_id].num_vertices;
+ meshtriangles += oldout[patchtess[i].surface_id].num_triangles;
+ }
+
i = oldi;
in = oldin;
out = oldout;
originaltexcoordtexture2f = loadmodel->brushq3.data_texcoordtexture2f + firstvertex * 2;
originaltexcoordlightmap2f = loadmodel->brushq3.data_texcoordlightmap2f + firstvertex * 2;
originalcolor4f = loadmodel->brushq3.data_color4f + firstvertex * 4;
- // convert patch to Q3FACETYPE_MESH
- xtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
- ytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
- // bound to user settings
- xtess = bound(r_subdivisions_mintess.integer, xtess, r_subdivisions_maxtess.integer);
- ytess = bound(r_subdivisions_mintess.integer, ytess, r_subdivisions_maxtess.integer);
- // bound to sanity settings
- xtess = bound(1, xtess, 1024);
- ytess = bound(1, ytess, 1024);
- // bound to user limit on vertices
- while ((xtess > 1 || ytess > 1) && (((patchsize[0] - 1) * xtess) + 1) * (((patchsize[1] - 1) * ytess) + 1) > min(r_subdivisions_maxvertices.integer, 262144))
+
+ xtess = ytess = cxtess = cytess = -1;
+ for(j = 0; j < patchtesscount; ++j)
+ if(patchtess[j].surface_id == i)
+ {
+ xtess = patchtess[j].info.lods[PATCH_LOD_VISUAL].xtess;
+ ytess = patchtess[j].info.lods[PATCH_LOD_VISUAL].ytess;
+ cxtess = patchtess[j].info.lods[PATCH_LOD_COLLISION].xtess;
+ cytess = patchtess[j].info.lods[PATCH_LOD_COLLISION].ytess;
+ break;
+ }
+ if(xtess == -1)
{
- if (xtess > ytess)
- xtess--;
- else
- ytess--;
+ Con_Printf("ERROR: patch %d isn't preprocessed?!?\n", i);
+ xtess = ytess = cxtess = cytess = 0;
}
- finalwidth = ((patchsize[0] - 1) * xtess) + 1;
- finalheight = ((patchsize[1] - 1) * ytess) + 1;
+
+ finalwidth = Q3PatchDimForTess(patchsize[0],xtess); //((patchsize[0] - 1) * xtess) + 1;
+ finalheight = Q3PatchDimForTess(patchsize[1],ytess); //((patchsize[1] - 1) * ytess) + 1;
finalvertices = finalwidth * finalheight;
finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
type = Q3FACETYPE_MESH;
Q3PatchTesselateFloat(2, sizeof(float[2]), (loadmodel->surfmesh.data_texcoordlightmap2f + 2 * out->num_firstvertex), patchsize[0], patchsize[1], sizeof(float[2]), originaltexcoordlightmap2f, xtess, ytess);
Q3PatchTesselateFloat(4, sizeof(float[4]), (loadmodel->surfmesh.data_lightmapcolor4f + 4 * out->num_firstvertex), patchsize[0], patchsize[1], sizeof(float[4]), originalcolor4f, xtess, ytess);
Q3PatchTriangleElements((loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle), finalwidth, finalheight, out->num_firstvertex);
+
out->num_triangles = Mod_RemoveDegenerateTriangles(out->num_triangles, (loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle), (loadmodel->surfmesh.data_element3i + 3 * out->num_firsttriangle), loadmodel->surfmesh.data_vertex3f);
+
if (developer.integer >= 100)
{
if (out->num_triangles < finaltriangles)
}
// q3map does not put in collision brushes for curves... ugh
// build the lower quality collision geometry
- xtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_collision_tolerance.value);
- ytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_collision_tolerance.value);
- // bound to user settings
- xtess = bound(r_subdivisions_collision_mintess.integer, xtess, r_subdivisions_collision_maxtess.integer);
- ytess = bound(r_subdivisions_collision_mintess.integer, ytess, r_subdivisions_collision_maxtess.integer);
- // bound to sanity settings
- xtess = bound(1, xtess, 1024);
- ytess = bound(1, ytess, 1024);
- // bound to user limit on vertices
- while ((xtess > 1 || ytess > 1) && (((patchsize[0] - 1) * xtess) + 1) * (((patchsize[1] - 1) * ytess) + 1) > min(r_subdivisions_collision_maxvertices.integer, 262144))
- {
- if (xtess > ytess)
- xtess--;
- else
- ytess--;
- }
- finalwidth = ((patchsize[0] - 1) * xtess) + 1;
- finalheight = ((patchsize[1] - 1) * ytess) + 1;
+ finalwidth = Q3PatchDimForTess(patchsize[0],cxtess); //((patchsize[0] - 1) * cxtess) + 1;
+ finalheight = Q3PatchDimForTess(patchsize[1],cytess); //((patchsize[1] - 1) * cytess) + 1;
finalvertices = finalwidth * finalheight;
finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
out->data_collisionelement3i = (int *)Mem_Alloc(loadmodel->mempool, sizeof(int[3]) * finaltriangles);
out->num_collisionvertices = finalvertices;
out->num_collisiontriangles = finaltriangles;
- Q3PatchTesselateFloat(3, sizeof(float[3]), out->data_collisionvertex3f, patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, xtess, ytess);
+ Q3PatchTesselateFloat(3, sizeof(float[3]), out->data_collisionvertex3f, patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, cxtess, cytess);
Q3PatchTriangleElements(out->data_collisionelement3i, finalwidth, finalheight, 0);
//Mod_SnapVertices(3, out->num_vertices, (loadmodel->surfmesh.data_vertex3f + 3 * out->num_firstvertex), 0.25);
{
// figure out which part of the merged lightmap this fits into
int lightmapindex = LittleLong(in->lightmapindex) >> loadmodel->brushq3.deluxemapping;
- int mergewidth = R_TextureWidth(out->lightmaptexture) / 128;
- int mergeheight = R_TextureHeight(out->lightmaptexture) / 128;
+ int mergewidth = R_TextureWidth(out->lightmaptexture) / loadmodel->brushq3.lightmapsize;
+ int mergeheight = R_TextureHeight(out->lightmaptexture) / loadmodel->brushq3.lightmapsize;
lightmapindex &= mergewidth * mergeheight - 1;
lightmaptcscale[0] = 1.0f / mergewidth;
lightmaptcscale[1] = 1.0f / mergeheight;
//out->lightmapinfo->styles[3] = 255;
}
+ i = oldi;
+ out = oldout;
+ for (;i < count;i++, out++)
+ {
+ if(out->num_vertices && out->num_triangles)
+ continue;
+ if(out->num_vertices == 0)
+ Con_Printf("Mod_Q3BSP_LoadFaces: surface %d has no vertices, ignoring\n", i);
+ if(out->num_triangles == 0)
+ Con_Printf("Mod_Q3BSP_LoadFaces: surface %d has no triangles, ignoring\n", i);
+ }
+
// for per pixel lighting
Mod_BuildTextureVectorsFromNormals(0, loadmodel->surfmesh.num_vertices, loadmodel->surfmesh.num_triangles, loadmodel->surfmesh.data_vertex3f, loadmodel->surfmesh.data_texcoordtexture2f, loadmodel->surfmesh.data_normal3f, loadmodel->surfmesh.data_element3i, loadmodel->surfmesh.data_svector3f, loadmodel->surfmesh.data_tvector3f, true);
if (loadmodel->brushq3.data_element3i)
Mem_Free(loadmodel->brushq3.data_element3i);
loadmodel->brushq3.data_element3i = NULL;
+
+ if(patchtess)
+ Mem_Free(patchtess);
}
static void Mod_Q3BSP_LoadModels(lump_t *l)
void Mod_Q3BSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
{
- int i, j, numshadowmeshtriangles;
+ int i, j, numshadowmeshtriangles, lumps;
q3dheader_t *header;
float corner[3], yawradius, modelradius;
msurface_t *surface;
mod->numskins = 1;
header = (q3dheader_t *)buffer;
+ if((char *) bufferend < (char *) buffer + sizeof(q3dheader_t))
+ Host_Error("Mod_Q3BSP_Load: %s is smaller than its header", mod->name);
i = LittleLong(header->version);
- if (i != Q3BSPVERSION)
+ if (i != Q3BSPVERSION && i != Q3BSPVERSION_IG && i != Q3BSPVERSION_LIVE)
Host_Error("Mod_Q3BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q3BSPVERSION);
- mod->brush.ishlbsp = false;
- if (loadmodel->isworldmodel)
- Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
mod->soundfromcenter = true;
mod->TraceBox = Mod_Q3BSP_TraceBox;
mod->brush.FindBoxClusters = Mod_Q1BSP_FindBoxClusters;
mod->brush.LightPoint = Mod_Q3BSP_LightPoint;
mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
+ mod->brush.RoundUpToHullSize = NULL;
mod->brush.PointInLeaf = Mod_Q1BSP_PointInLeaf;
mod->Draw = R_Q1BSP_Draw;
mod->DrawDepth = R_Q1BSP_DrawDepth;
mod->CompileShadowVolume = R_Q1BSP_CompileShadowVolume;
mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
mod->DrawLight = R_Q1BSP_DrawLight;
- mod->DrawAddWaterPlanes = NULL;
mod_base = (unsigned char *)header;
// swap all the lumps
header->ident = LittleLong(header->ident);
header->version = LittleLong(header->version);
- for (i = 0;i < Q3HEADER_LUMPS;i++)
+ lumps = (header->version == Q3BSPVERSION_LIVE) ? Q3HEADER_LUMPS_LIVE : Q3HEADER_LUMPS;
+ for (i = 0;i < lumps;i++)
{
- header->lumps[i].fileofs = LittleLong(header->lumps[i].fileofs);
- header->lumps[i].filelen = LittleLong(header->lumps[i].filelen);
+ j = (header->lumps[i].fileofs = LittleLong(header->lumps[i].fileofs));
+ if((char *) bufferend < (char *) buffer + j)
+ Host_Error("Mod_Q3BSP_Load: %s has a lump that starts outside the file!", mod->name);
+ j += (header->lumps[i].filelen = LittleLong(header->lumps[i].filelen));
+ if((char *) bufferend < (char *) buffer + j)
+ Host_Error("Mod_Q3BSP_Load: %s has a lump that ends outside the file!", mod->name);
}
+ /*
+ * NO, do NOT clear them!
+ * they contain actual data referenced by other stuff.
+ * Instead, before using the advertisements lump, check header->versio
+ * again!
+ * Sorry, but otherwise it breaks memory of the first lump.
+ for (i = lumps;i < Q3HEADER_LUMPS_MAX;i++)
+ {
+ header->lumps[i].fileofs = 0;
+ header->lumps[i].filelen = 0;
+ }
+ */
mod->brush.qw_md4sum = 0;
mod->brush.qw_md4sum2 = 0;
- for (i = 0;i < Q3HEADER_LUMPS;i++)
+ for (i = 0;i < lumps;i++)
{
if (i == Q3LUMP_ENTITIES)
continue;
if (i == Q3LUMP_PVS || i == Q3LUMP_LEAFS || i == Q3LUMP_NODES)
continue;
mod->brush.qw_md4sum2 ^= Com_BlockChecksum(mod_base + header->lumps[i].fileofs, header->lumps[i].filelen);
+
+ // all this checksumming can take a while, so let's send keepalives here too
+ CL_KeepaliveMessage(false);
}
Mod_Q3BSP_LoadEntities(&header->lumps[Q3LUMP_ENTITIES]);
Mod_Q3BSP_LoadTextures(&header->lumps[Q3LUMP_TEXTURES]);
Mod_Q3BSP_LoadPlanes(&header->lumps[Q3LUMP_PLANES]);
- Mod_Q3BSP_LoadBrushSides(&header->lumps[Q3LUMP_BRUSHSIDES]);
+ if (header->version == Q3BSPVERSION_IG)
+ Mod_Q3BSP_LoadBrushSides_IG(&header->lumps[Q3LUMP_BRUSHSIDES]);
+ else
+ Mod_Q3BSP_LoadBrushSides(&header->lumps[Q3LUMP_BRUSHSIDES]);
Mod_Q3BSP_LoadBrushes(&header->lumps[Q3LUMP_BRUSHES]);
Mod_Q3BSP_LoadEffects(&header->lumps[Q3LUMP_EFFECTS]);
Mod_Q3BSP_LoadVertices(&header->lumps[Q3LUMP_VERTICES]);
// make a single combined shadow mesh to allow optimized shadow volume creation
numshadowmeshtriangles = 0;
- for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ if (cls.state != ca_dedicated)
{
- surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
- numshadowmeshtriangles += surface->num_triangles;
+ for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ {
+ surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
+ numshadowmeshtriangles += surface->num_triangles;
+ }
+ loadmodel->brush.shadowmesh = Mod_ShadowMesh_Begin(loadmodel->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
+ for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ if (surface->num_triangles > 0)
+ Mod_ShadowMesh_AddMesh(loadmodel->mempool, loadmodel->brush.shadowmesh, NULL, NULL, NULL, loadmodel->surfmesh.data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle));
+ loadmodel->brush.shadowmesh = Mod_ShadowMesh_Finish(loadmodel->mempool, loadmodel->brush.shadowmesh, false, true, false);
+ Mod_BuildTriangleNeighbors(loadmodel->brush.shadowmesh->neighbor3i, loadmodel->brush.shadowmesh->element3i, loadmodel->brush.shadowmesh->numtriangles);
}
- loadmodel->brush.shadowmesh = Mod_ShadowMesh_Begin(loadmodel->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
- for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
- if (surface->num_triangles > 0)
- Mod_ShadowMesh_AddMesh(loadmodel->mempool, loadmodel->brush.shadowmesh, NULL, NULL, NULL, loadmodel->surfmesh.data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (loadmodel->surfmesh.data_element3i + 3 * surface->num_firsttriangle));
- loadmodel->brush.shadowmesh = Mod_ShadowMesh_Finish(loadmodel->mempool, loadmodel->brush.shadowmesh, false, true, false);
- Mod_BuildTriangleNeighbors(loadmodel->brush.shadowmesh->neighbor3i, loadmodel->brush.shadowmesh->element3i, loadmodel->brush.shadowmesh->numtriangles);
loadmodel->brush.num_leafs = 0;
Mod_Q3BSP_RecursiveFindNumLeafs(loadmodel->brush.data_nodes);
if (i > 0)
{
char name[10];
- // LordHavoc: only register submodels if it is the world
- // (prevents external bsp models from replacing world submodels with
- // their own)
- if (!loadmodel->isworldmodel)
- continue;
// duplicate the basic information
- sprintf(name, "*%i", i);
- mod = Mod_FindName(name);
+ dpsnprintf(name, sizeof(name), "*%i", i);
+ mod = Mod_FindName(name, loadmodel->name);
+ // copy the base model to this one
*mod = *loadmodel;
+ // rename the clone back to its proper name
strlcpy(mod->name, name, sizeof(mod->name));
+ mod->brush.parentmodel = loadmodel;
// textures and memory belong to the main model
mod->texturepool = NULL;
mod->mempool = NULL;
mod->brush.BoxTouchingVisibleLeafs = NULL;
mod->brush.FindBoxClusters = NULL;
mod->brush.LightPoint = NULL;
- mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
}
mod->brush.submodel = i;
mod->nummodelsurfaces = mod->brushq3.data_models[i].numfaces;
mod->firstmodelbrush = mod->brushq3.data_models[i].firstbrush;
mod->nummodelbrushes = mod->brushq3.data_models[i].numbrushes;
- mod->surfacelist = (int *)Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->surfacelist));
- for (j = 0;j < mod->nummodelsurfaces;j++)
- mod->surfacelist[j] = mod->firstmodelsurface + j;
+ mod->sortedmodelsurfaces = (int *)Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->sortedmodelsurfaces));
+ Mod_MakeSortedSurfaces(mod);
VectorCopy(mod->brushq3.data_models[i].mins, mod->normalmins);
VectorCopy(mod->brushq3.data_models[i].maxs, mod->normalmaxs);
mod->radius = modelradius;
mod->radius2 = modelradius * modelradius;
+ // this gets altered below if sky or water is used
+ mod->DrawSky = NULL;
+ mod->DrawAddWaterPlanes = NULL;
+
for (j = 0;j < mod->nummodelsurfaces;j++)
if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & MATERIALFLAG_SKY)
break;
if (j < mod->nummodelsurfaces)
mod->DrawSky = R_Q1BSP_DrawSky;
- else
- mod->DrawSky = NULL;
for (j = 0;j < mod->nummodelsurfaces;j++)
if (mod->data_surfaces[j + mod->firstmodelsurface].texture->basematerialflags & (MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION | MATERIALFLAG_REFLECTION))
break;
if (j < mod->nummodelsurfaces)
mod->DrawAddWaterPlanes = R_Q1BSP_DrawAddWaterPlanes;
- else
- mod->DrawAddWaterPlanes = NULL;
}
}
void Mod_IBSP_Load(dp_model_t *mod, void *buffer, void *bufferend)
{
int i = LittleLong(((int *)buffer)[1]);
- if (i == Q3BSPVERSION)
+ if (i == Q3BSPVERSION || i == Q3BSPVERSION_IG || i == Q3BSPVERSION_LIVE)
Mod_Q3BSP_Load(mod,buffer, bufferend);
else if (i == Q2BSPVERSION)
Mod_Q2BSP_Load(mod,buffer, bufferend);
projects / xonotic / darkplaces.git / blobdiff