==============================================================================
*/
+#define Q3PATHLENGTH 64
+
//
// in memory representation
//
-typedef struct
+typedef struct mvertex_s
{
vec3_t position;
}
#define SHADERSTAGE_NORMAL 1
#define SHADERSTAGE_COUNT 2
-#define SHADERFLAGS_NEEDLIGHTMAP 1
-
-#define SURF_PLANEBACK 2
-#define SURF_DRAWSKY 4
-#define SURF_DRAWTURB 0x10
-#define SURF_LIGHTMAP 0x20
-#define SURF_DRAWNOALPHA 0x100
-#define SURF_DRAWFULLBRIGHT 0x200
-#define SURF_LIGHTBOTHSIDES 0x400
-#define SURF_SHADOWCAST 0x1000 // this polygon can cast stencil shadows
-#define SURF_SHADOWLIGHT 0x2000 // this polygon can be lit by stencil shadowing
-#define SURF_WATERALPHA 0x4000 // this polygon's alpha is modulated by r_wateralpha
-#define SURF_SOLIDCLIP 0x8000 // this polygon blocks movement
-
-#define SURFRENDER_OPAQUE 0
-#define SURFRENDER_ALPHA 1
-#define SURFRENDER_ADD 2
-
-struct entity_render_s;
-struct texture_s;
-struct msurface_s;
-// change this stuff when real shaders are added
-typedef struct Cshader_s
-{
- void (*shaderfunc[SHADERSTAGE_COUNT])(const struct entity_render_s *ent, const struct texture_s *texture, struct msurface_s **surfchain);
- int flags;
-}
-Cshader_t;
-
-extern Cshader_t Cshader_wall_lightmap;
-extern Cshader_t Cshader_water;
-extern Cshader_t Cshader_sky;
-
-typedef struct texture_s
-{
- // name
- char name[16];
- // size
- unsigned int width, height;
- // SURF_ flags
- unsigned int flags;
-
- // position in the model's textures array
- int number;
-
- // type of rendering (SURFRENDER_ value)
- int rendertype;
-
- // loaded the same as model skins
- skinframe_t skin;
-
- // shader to use for this texture
- Cshader_t *shader;
-
- // total frames in sequence and alternate sequence
- int anim_total[2];
- // direct pointers to each of the frames in the sequences
- // (indexed as [alternate][frame])
- struct texture_s *anim_frames[2][10];
- // set if animated or there is an alternate frame set
- // (this is an optimization in the renderer)
- int animated;
- // the current texture frame in animation
- struct texture_s *currentframe;
- // current alpha of the texture
- float currentalpha;
-}
-texture_t;
-
-typedef struct
+//#define SURF_PLANEBACK 2
+
+// set for anything to be transparent sorted
+#define MATERIALFLAG_TRANSPARENT 1
+// use alpha blend on this material
+#define MATERIALFLAG_ALPHA 2
+// use additive blend on this material
+#define MATERIALFLAG_ADD 4
+// turn off depth test on this material
+#define MATERIALFLAG_NODEPTHTEST 8
+// multiply alpha by r_wateralpha cvar
+#define MATERIALFLAG_WATERALPHA 16
+// draw with no lighting
+#define MATERIALFLAG_FULLBRIGHT 32
+// drawn as a normal lightmapped wall
+#define MATERIALFLAG_WALL 64
+// swirling water effect
+#define MATERIALFLAG_WATER 128
+// this surface shows the sky
+// skipped if transparent
+#define MATERIALFLAG_SKY 256
+// skips drawing the surface
+#define MATERIALFLAG_NODRAW 512
+// probably used only on q1bsp water
+#define MATERIALFLAG_LIGHTBOTHSIDES 1024
+
+typedef struct medge_s
{
unsigned short v[2];
}
medge_t;
-typedef struct
-{
- float vecs[2][4];
- texture_t *texture;
- int flags;
-}
-mtexinfo_t;
-
-// LordHavoc: replaces glpoly, triangle mesh
-typedef struct surfmesh_s
-{
- // can be multiple meshs per surface
- struct surfmesh_s *chain;
- int numverts; // number of vertices in the mesh
- int numtriangles; // number of triangles in the mesh
- float *vertex3f; // float[verts*3] vertex locations
- float *svector3f; // float[verts*3] direction of 'S' (right) texture axis for each vertex
- float *tvector3f; // float[verts*3] direction of 'T' (down) texture axis for each vertex
- float *normal3f; // float[verts*3] direction of 'R' (out) texture axis for each vertex
- int *lightmapoffsets; // index into surface's lightmap samples for vertex lighting
- float *texcoordtexture2f; // float[verts*2] texcoords for surface texture
- float *texcoordlightmap2f; // float[verts*2] texcoords for lightmap texture
- float *texcoorddetail2f; // float[verts*2] texcoords for detail texture
- int *element3i; // int[tris*3] triangles of the mesh, 3 indices into vertex arrays for each
- int *neighbor3i; // int[tris*3] neighboring triangle on each edge (-1 if none)
-}
-surfmesh_t;
-
-typedef struct msurface_s
-{
- // bounding box for onscreen checks
- vec3_t poly_mins;
- vec3_t poly_maxs;
-
- // the node plane this is on, backwards if SURF_PLANEBACK flag set
- mplane_t *plane;
- // SURF_ flags
- int flags;
- // texture mapping properties used by this surface
- mtexinfo_t *texinfo;
-
- // the lightmap texture fragment to use on the rendering mesh
- rtexture_t *lightmaptexture;
- // mesh for rendering
- surfmesh_t *mesh;
- // if lightmap settings changed, this forces update
- int cached_dlight;
-
- // should be drawn if visframe == r_framecount (set by PrepareSurfaces)
- int visframe;
- // should be drawn if onscreen and not a backface (used for setting visframe)
- //int pvsframe;
- // chain of surfaces marked visible by pvs
- //struct msurface_s *pvschain;
-
- // surface number, to avoid having to do a divide to find the number of a surface from it's address
- int number;
-
- // center for sorting transparent meshes
- vec3_t poly_center;
-
- // index into d_lightstylevalue array, 255 means not used (black)
- qbyte styles[MAXLIGHTMAPS];
- // RGB lighting data [numstyles][height][width][3]
- qbyte *samples;
- // stain to apply on lightmap (soot/dirt/blood/whatever)
- qbyte *stainsamples;
- // the stride when building lightmaps to comply with fragment update
- int lightmaptexturestride;
- int texturemins[2];
- int extents[2];
-
- // if this == r_framecount there are dynamic lights on the surface
- int dlightframe;
- // which dynamic lights are touching this surface
- // (only access this if dlightframe is current)
- int dlightbits[8];
- // avoid redundent addition of dlights
- int lightframe;
-
- // avoid multiple collision traces with a surface polygon
- int colframe;
-
- // these are just 3D points defining the outline of the polygon,
- // no texcoord info (that can be generated from these)
- int poly_numverts;
- float *poly_verts;
-
- // neighboring surfaces (one per poly_numverts)
- //struct msurface_s **neighborsurfaces;
- // currently used only for generating static shadow volumes
- int castshadow;
-}
-msurface_t;
+struct entity_render_s;
+struct texture_s;
+struct msurface_s;
typedef struct mnode_s
{
-// common with leaf
- // always 0 in nodes
- int contents;
-
+ //this part shared between node and leaf
+ mplane_t *plane; // != NULL
struct mnode_s *parent;
struct mportal_s *portals;
-
// for bounding box culling
vec3_t mins;
vec3_t maxs;
-// node specific
- mplane_t *plane;
+ // this part unique to node
struct mnode_s *children[2];
+ // q1bsp specific
unsigned short firstsurface;
unsigned short numsurfaces;
}
typedef struct mleaf_s
{
-// common with node
- // always negative in leafs
- int contents;
-
+ //this part shared between node and leaf
+ mplane_t *plane; // == NULL
struct mnode_s *parent;
struct mportal_s *portals;
-
// for bounding box culling
vec3_t mins;
vec3_t maxs;
-// leaf specific
- // next leaf in pvschain
- struct mleaf_s *pvschain;
- // potentially visible if current (model->pvsframecount)
- int pvsframe;
- // visible if marked current (r_framecount)
- int visframe;
- // used by certain worldnode variants to avoid processing the same leaf twice in a frame
- int worldnodeframe;
- // used by polygon-through-portals visibility checker
- int portalmarkid;
-
- qbyte *compressed_vis;
-
- int *firstmarksurface;
- int nummarksurfaces;
- qbyte ambient_sound_level[NUM_AMBIENTS];
+ // this part unique to leaf
+ // common
+ int clusterindex; // -1 is not in pvs, >= 0 is pvs bit number
+ int areaindex; // q3bsp
+ int numleafsurfaces;
+ int *firstleafsurface;
+ int numleafbrushes; // q3bsp
+ int *firstleafbrush; // q3bsp
+ unsigned char ambient_sound_level[NUM_AMBIENTS]; // q1bsp
+ int contents; // q1bsp: // TODO: remove (only used temporarily during loading when making collision hull 0)
+ int portalmarkid; // q1bsp // used by see-polygon-through-portals visibility checker
}
mleaf_t;
-typedef struct
+typedef struct hull_s
{
dclipnode_t *clipnodes;
mplane_t *planes;
struct mportal_s *next; // the next portal on this leaf
mleaf_t *here; // the leaf this portal is on
mleaf_t *past; // the leaf through this portal (infront)
- mvertex_t *points;
int numpoints;
+ mvertex_t *points;
+ vec3_t mins, maxs; // culling
mplane_t plane;
- int visframe; // is this portal visible this frame?
}
mportal_t;
}
mlight_t;
-extern rtexture_t *r_notexture;
-extern texture_t r_notexture_mip;
-
-struct model_s;
-void Mod_Q1BSP_Load(struct model_s *mod, void *buffer);
-void Mod_IBSP_Load(struct model_s *mod, void *buffer);
-void Mod_MAP_Load(struct model_s *mod, void *buffer);
-void Mod_BrushInit(void);
-
// Q2 bsp stuff
#define Q2BSPVERSION 38
#define Q2LUMP_AREAPORTALS 18
#define Q2HEADER_LUMPS 19
-typedef struct
+typedef struct q2dheader_s
{
int ident;
int version;
lump_t lumps[HEADER_LUMPS];
} q2dheader_t;
-typedef struct
+typedef struct q2dmodel_s
{
float mins[3], maxs[3];
float origin[3]; // for sounds or lights
-typedef struct
+typedef struct q2dnode_s
{
int planenum;
int children[2]; // negative numbers are -(leafs+1), not nodes
} q2dnode_t;
-typedef struct
+typedef struct q2texinfo_s
{
float vecs[2][4]; // [s/t][xyz offset]
int flags; // miptex flags + overrides
int nexttexinfo; // for animations, -1 = end of chain
} q2texinfo_t;
-typedef struct
+typedef struct q2dleaf_s
{
int contents; // OR of all brushes (not needed?)
unsigned short numleafbrushes;
} q2dleaf_t;
-typedef struct
+typedef struct q2dbrushside_s
{
unsigned short planenum; // facing out of the leaf
short texinfo;
} q2dbrushside_t;
-typedef struct
+typedef struct q2dbrush_s
{
int firstside;
int numsides;
// compressed bit vectors
#define Q2DVIS_PVS 0
#define Q2DVIS_PHS 1
-typedef struct
+typedef struct q2dvis_s
{
int numclusters;
int bitofs[8][2]; // bitofs[numclusters][2]
// each area has a list of portals that lead into other areas
// when portals are closed, other areas may not be visible or
// hearable even if the vis info says that it should be
-typedef struct
+typedef struct q2dareaportal_s
{
int portalnum;
int otherarea;
} q2dareaportal_t;
-typedef struct
+typedef struct q2darea_s
{
int numareaportals;
int firstareaportal;
} q2darea_t;
+
+//Q3 bsp stuff
+
+#define Q3BSPVERSION 46
+
+#define Q3LUMP_ENTITIES 0 // entities to spawn (used by server and client)
+#define Q3LUMP_TEXTURES 1 // textures used (used by faces)
+#define Q3LUMP_PLANES 2 // planes used (used by bsp nodes)
+#define Q3LUMP_NODES 3 // bsp nodes (used by bsp nodes, bsp leafs, rendering, collisions)
+#define Q3LUMP_LEAFS 4 // bsp leafs (used by bsp nodes)
+#define Q3LUMP_LEAFFACES 5 // array of ints indexing faces (used by leafs)
+#define Q3LUMP_LEAFBRUSHES 6 // array of ints indexing brushes (used by leafs)
+#define Q3LUMP_MODELS 7 // models (used by rendering, collisions)
+#define Q3LUMP_BRUSHES 8 // brushes (used by effects, collisions)
+#define Q3LUMP_BRUSHSIDES 9 // brush faces (used by brushes)
+#define Q3LUMP_VERTICES 10 // mesh vertices (used by faces)
+#define Q3LUMP_TRIANGLES 11 // mesh triangles (used by faces)
+#define Q3LUMP_EFFECTS 12 // fog (used by faces)
+#define Q3LUMP_FACES 13 // surfaces (used by leafs)
+#define Q3LUMP_LIGHTMAPS 14 // lightmap textures (used by faces)
+#define Q3LUMP_LIGHTGRID 15 // lighting as a voxel grid (used by rendering)
+#define Q3LUMP_PVS 16 // potentially visible set; bit[clusters][clusters] (used by rendering)
+#define Q3HEADER_LUMPS 17
+
+typedef struct q3dheader_s
+{
+ int ident;
+ int version;
+ lump_t lumps[HEADER_LUMPS];
+} q3dheader_t;
+
+typedef struct q3dtexture_s
+{
+ char name[Q3PATHLENGTH];
+ int surfaceflags;
+ int contents;
+}
+q3dtexture_t;
+
+// note: planes are paired, the pair of planes with i and i ^ 1 are opposites.
+typedef struct q3dplane_s
+{
+ float normal[3];
+ float dist;
+}
+q3dplane_t;
+
+typedef struct q3dnode_s
+{
+ int planeindex;
+ int childrenindex[2];
+ int mins[3];
+ int maxs[3];
+}
+q3dnode_t;
+
+typedef struct q3dleaf_s
+{
+ int clusterindex; // pvs index
+ int areaindex; // area index
+ int mins[3];
+ int maxs[3];
+ int firstleafface;
+ int numleaffaces;
+ int firstleafbrush;
+ int numleafbrushes;
+}
+q3dleaf_t;
+
+typedef struct q3dmodel_s
+{
+ float mins[3];
+ float maxs[3];
+ int firstface;
+ int numfaces;
+ int firstbrush;
+ int numbrushes;
+}
+q3dmodel_t;
+
+typedef struct q3dbrush_s
+{
+ int firstbrushside;
+ int numbrushsides;
+ int textureindex;
+}
+q3dbrush_t;
+
+typedef struct q3dbrushside_s
+{
+ int planeindex;
+ int textureindex;
+}
+q3dbrushside_t;
+
+typedef struct q3dvertex_s
+{
+ float origin3f[3];
+ float texcoord2f[2];
+ float lightmap2f[2];
+ float normal3f[3];
+ unsigned char color4ub[4];
+}
+q3dvertex_t;
+
+typedef struct q3dmeshvertex_s
+{
+ int offset; // first vertex index of mesh
+}
+q3dmeshvertex_t;
+
+typedef struct q3deffect_s
+{
+ char shadername[Q3PATHLENGTH];
+ int brushindex;
+ int unknown; // I read this is always 5 except in q3dm8 which has one effect with -1
+}
+q3deffect_t;
+
+#define Q3FACETYPE_POLYGON 1 // common
+#define Q3FACETYPE_PATCH 2 // common
+#define Q3FACETYPE_MESH 3 // common
+#define Q3FACETYPE_FLARE 4 // rare (is this ever used?)
+
+typedef struct q3dface_s
+{
+ int textureindex;
+ int effectindex; // -1 if none
+ int type; // Q3FACETYPE
+ int firstvertex;
+ int numvertices;
+ int firstelement;
+ int numelements;
+ int lightmapindex; // -1 if none
+ int lightmap_base[2];
+ int lightmap_size[2];
+ union
+ {
+ struct
+ {
+ // corrupt or don't care
+ int blah[14];
+ }
+ unknown;
+ struct
+ {
+ // Q3FACETYPE_POLYGON
+ // polygon is simply a convex polygon, renderable as a mesh
+ float lightmap_origin[3];
+ float lightmap_vectors[2][3];
+ float normal[3];
+ int unused1[2];
+ }
+ polygon;
+ struct
+ {
+ // Q3FACETYPE_PATCH
+ // patch renders as a bezier mesh, with adjustable tesselation
+ // level (optionally based on LOD using the bbox and polygon
+ // count to choose a tesselation level)
+ // note: multiple patches may have the same bbox to cause them to
+ // be LOD adjusted together as a group
+ int unused1[3];
+ float mins[3]; // LOD bbox
+ float maxs[3]; // LOD bbox
+ int unused2[3];
+ int patchsize[2]; // dimensions of vertex grid
+ }
+ patch;
+ struct
+ {
+ // Q3FACETYPE_MESH
+ // mesh renders as simply a triangle mesh
+ int unused1[3];
+ float mins[3];
+ float maxs[3];
+ int unused2[5];
+ }
+ mesh;
+ struct
+ {
+ // Q3FACETYPE_FLARE
+ // flare renders as a simple sprite at origin, no geometry
+ // exists, nor does it have a radius, a cvar controls the radius
+ // and another cvar controls distance fade
+ // (they were not used in Q3 I'm told)
+ float origin[3];
+ int unused1[11];
+ }
+ flare;
+ }
+ specific;
+}
+q3dface_t;
+
+typedef struct q3dlightmap_s
+{
+ unsigned char rgb[128*128*3];
+}
+q3dlightmap_t;
+
+typedef struct q3dlightgrid_s
+{
+ unsigned char ambientrgb[3];
+ unsigned char diffusergb[3];
+ unsigned char diffusepitch;
+ unsigned char diffuseyaw;
+}
+q3dlightgrid_t;
+
+typedef struct q3dpvs_s
+{
+ int numclusters;
+ int chainlength;
+ // unsigned char chains[];
+ // containing bits in 0-7 order (not 7-0 order),
+ // pvschains[mycluster * chainlength + (thatcluster >> 3)] & (1 << (thatcluster & 7))
+}
+q3dpvs_t;
+
+// surfaceflags from bsp
+#define Q3SURFACEFLAG_NODAMAGE 1
+#define Q3SURFACEFLAG_SLICK 2
+#define Q3SURFACEFLAG_SKY 4
+#define Q3SURFACEFLAG_LADDER 8
+#define Q3SURFACEFLAG_NOIMPACT 16
+#define Q3SURFACEFLAG_NOMARKS 32
+#define Q3SURFACEFLAG_FLESH 64
+#define Q3SURFACEFLAG_NODRAW 128
+#define Q3SURFACEFLAG_HINT 256
+#define Q3SURFACEFLAG_SKIP 512
+#define Q3SURFACEFLAG_NOLIGHTMAP 1024
+#define Q3SURFACEFLAG_POINTLIGHT 2048
+#define Q3SURFACEFLAG_METALSTEPS 4096
+#define Q3SURFACEFLAG_NOSTEPS 8192
+#define Q3SURFACEFLAG_NONSOLID 16384
+#define Q3SURFACEFLAG_LIGHTFILTER 32768
+#define Q3SURFACEFLAG_ALPHASHADOW 65536
+#define Q3SURFACEFLAG_NODLIGHT 131072
+#define Q3SURFACEFLAG_DUST 262144
+
+// surfaceparms from shaders
+#define Q3SURFACEPARM_ALPHASHADOW 1
+#define Q3SURFACEPARM_AREAPORTAL 2
+#define Q3SURFACEPARM_CLUSTERPORTAL 4
+#define Q3SURFACEPARM_DETAIL 8
+#define Q3SURFACEPARM_DONOTENTER 16
+#define Q3SURFACEPARM_FOG 32
+#define Q3SURFACEPARM_LAVA 64
+#define Q3SURFACEPARM_LIGHTFILTER 128
+#define Q3SURFACEPARM_METALSTEPS 256
+#define Q3SURFACEPARM_NODAMAGE 512
+#define Q3SURFACEPARM_NODLIGHT 1024
+#define Q3SURFACEPARM_NODRAW 2048
+#define Q3SURFACEPARM_NODROP 4096
+#define Q3SURFACEPARM_NOIMPACT 8192
+#define Q3SURFACEPARM_NOLIGHTMAP 16384
+#define Q3SURFACEPARM_NOMARKS 32768
+#define Q3SURFACEPARM_NOMIPMAPS 65536
+#define Q3SURFACEPARM_NONSOLID 131072
+#define Q3SURFACEPARM_ORIGIN 262144
+#define Q3SURFACEPARM_PLAYERCLIP 524288
+#define Q3SURFACEPARM_SKY 1048576
+#define Q3SURFACEPARM_SLICK 2197152
+#define Q3SURFACEPARM_SLIME 4194304
+#define Q3SURFACEPARM_STRUCTURAL 8388608
+#define Q3SURFACEPARM_TRANS 16777216
+#define Q3SURFACEPARM_WATER 33554432
+#define Q3SURFACEPARM_POINTLIGHT 67108864
+
+// various flags from shaders
+#define Q3TEXTUREFLAG_TWOSIDED 1
+#define Q3TEXTUREFLAG_ADDITIVE 2
+#define Q3TEXTUREFLAG_NOMIPMAPS 4
+#define Q3TEXTUREFLAG_NOPICMIP 8
+#define Q3TEXTUREFLAG_AUTOSPRITE 16
+#define Q3TEXTUREFLAG_AUTOSPRITE2 32
+#define Q3TEXTUREFLAG_ALPHATEST 64
+
+typedef struct q3mbrush_s
+{
+ struct colbrushf_s *colbrushf;
+ int numbrushsides;
+ struct q3mbrushside_s *firstbrushside;
+ struct texture_s *texture;
+}
+q3mbrush_t;
+
+typedef struct q3mbrushside_s
+{
+ struct mplane_s *plane;
+ struct texture_s *texture;
+}
+q3mbrushside_t;
+
+#define CHECKPVSBIT(pvs,b) ((b) >= 0 ? ((pvs)[(b) >> 3] & (1 << ((b) & 7))) : false)
+#define SETPVSBIT(pvs,b) ((b) >= 0 ? ((pvs)[(b) >> 3] |= (1 << ((b) & 7))) : false)
+#define CLEARPVSBIT(pvs,b) ((b) >= 0 ? ((pvs)[(b) >> 3] &= ~(1 << ((b) & 7))) : false)
+
#endif
projects / xonotic / darkplaces.git / blobdiff