cvar_t cl_bobmodel_side = {CVAR_SAVE, "cl_bobmodel_side", "0.15", "gun bobbing sideways sway amount"};
cvar_t cl_bobmodel_up = {CVAR_SAVE, "cl_bobmodel_up", "0.06", "gun bobbing upward movement amount"};
cvar_t cl_bobmodel_speed = {CVAR_SAVE, "cl_bobmodel_speed", "7", "gun bobbing speed"};
+cvar_t cl_bob_limit = {CVAR_SAVE, "cl_bob_limit", "7", "limits bobbing to this much distance from view_ofs"};
+cvar_t cl_bob_limit_heightcheck = {CVAR_SAVE, "cl_bob_limit_heightcheck", "0", "check ceiling and floor height against cl_bob_limit and scale down all view bobbing if could result in camera being in solid"};
+cvar_t cl_bob_limit_heightcheck_dontcrosswatersurface = {CVAR_SAVE, "cl_bob_limit_heightcheck_dontcrosswatersurface", "1", "limit cl_bob_limit to not crossing liquid surfaces also"};
+cvar_t cl_bob_velocity_limit = {CVAR_SAVE, "cl_bob_velocity_limit", "400", "limits the xyspeed value in the bobbing code"};
cvar_t cl_leanmodel = {CVAR_SAVE, "cl_leanmodel", "0", "enables gun leaning"};
cvar_t cl_leanmodel_side_speed = {CVAR_SAVE, "cl_leanmodel_side_speed", "0.7", "gun leaning sideways speed"};
// Prophecy camera pitchangle by Alexander "motorsep" Zubov
cvar_t chase_pitchangle = {CVAR_SAVE, "chase_pitchangle", "55", "chase cam pitch angle"};
+cvar_t v_yshearing = {0, "v_yshearing", "0", "be all out of gum (set this to the maximum angle to allow Y shearing for - try values like 75)"};
+
float v_dmg_time, v_dmg_roll, v_dmg_pitch;
cl.oldonground = clonground;
cl.calcrefdef_prevtime = max(cl.calcrefdef_prevtime, cl.oldtime);
+ VectorClear(gunangles);
VectorClear(gunorg);
viewmodelmatrix_nobob = identitymatrix;
viewmodelmatrix_withbob = identitymatrix;
r_refdef.view.matrix = *entrendermatrix;
Matrix4x4_AdjustOrigin(&r_refdef.view.matrix, 0, 0, clstatsviewheight);
}
+ if (v_yshearing.value > 0)
+ Matrix4x4_QuakeToDuke3D(&r_refdef.view.matrix, &r_refdef.view.matrix, v_yshearing.value);
Matrix4x4_Copy(&viewmodelmatrix_nobob, &r_refdef.view.matrix);
Matrix4x4_ConcatScale(&viewmodelmatrix_nobob, cl_viewmodel_scale.value);
Matrix4x4_Copy(&viewmodelmatrix_withbob, &viewmodelmatrix_nobob);
chase_dest[2] = vieworg[2] - forward[2] * camback + up[2] * camup;
#if 0
#if 1
- //trace = CL_TraceLine(vieworg, eyeboxmins, eyeboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false);
- trace = CL_TraceLine(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false);
+ //trace = CL_TraceLine(vieworg, eyeboxmins, eyeboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, true, false, NULL, false);
+ trace = CL_TraceLine(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, true, false, NULL, false);
#else
- //trace = CL_TraceBox(vieworg, eyeboxmins, eyeboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false);
- trace = CL_TraceBox(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false);
+ //trace = CL_TraceBox(vieworg, eyeboxmins, eyeboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, true, false, NULL, false);
+ trace = CL_TraceBox(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, true, false, NULL, false);
#endif
VectorCopy(trace.endpos, vieworg);
vieworg[2] -= 8;
#else
// trace from first person view location to our chosen third person view location
#if 1
- trace = CL_TraceLine(vieworg, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false, true);
+ trace = CL_TraceLine(vieworg, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false, true);
#else
- trace = CL_TraceBox(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false);
+ trace = CL_TraceBox(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false);
#endif
VectorCopy(trace.endpos, bestvieworg);
offset[2] = 0;
chase_dest[1] = vieworg[1] - forward[1] * camback + up[1] * camup + offset[1];
chase_dest[2] = vieworg[2] - forward[2] * camback + up[2] * camup + offset[2];
#if 1
- trace = CL_TraceLine(vieworg, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false, true);
+ trace = CL_TraceLine(vieworg, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false, true);
#else
- trace = CL_TraceBox(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false);
+ trace = CL_TraceBox(vieworg, camboxmins, camboxmaxs, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false);
#endif
if (bestvieworg[2] > trace.endpos[2])
bestvieworg[2] = trace.endpos[2];
chase_dest[0] = vieworg[0] + forward[0] * dist;
chase_dest[1] = vieworg[1] + forward[1] * dist;
chase_dest[2] = vieworg[2] + forward[2] * dist + camup;
- trace = CL_TraceLine(vieworg, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_SKY, true, false, NULL, false, true);
+ trace = CL_TraceLine(vieworg, chase_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY, 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false, true);
VectorMAMAM(1, trace.endpos, 8, forward, 4, trace.plane.normal, vieworg);
}
}
if (!cldead)
{
double xyspeed, bob, bobfall;
- float cycle;
+ double cycle; // double-precision because cl.time can be a very large number, where float would get stuttery at high time values
vec_t frametime;
frametime = (cl.time - cl.calcrefdef_prevtime) * cl.movevars_timescale;
- // 1. if we teleported, clear the frametime... the lowpass will recover the previous value then
- if(teleported)
+ if(cl_followmodel.integer || cl_leanmodel.integer)
{
- // try to fix the first highpass; result is NOT
- // perfect! TODO find a better fix
- VectorCopy(viewangles, cl.gunangles_prev);
+ // 1. if we teleported, clear the frametime... the lowpass will recover the previous value then
+ if(teleported)
+ {
+ // try to fix the first highpass; result is NOT
+ // perfect! TODO find a better fix
+ VectorCopy(viewangles, cl.gunangles_prev);
+ VectorCopy(vieworg, cl.gunorg_prev);
+ }
+
+ // 2. for the gun origin, only keep the high frequency (non-DC) parts, which is "somewhat like velocity"
+ VectorAdd(cl.gunorg_highpass, cl.gunorg_prev, cl.gunorg_highpass);
+ highpass3_limited(vieworg, frametime*cl_followmodel_side_highpass1.value, cl_followmodel_side_limit.value, frametime*cl_followmodel_side_highpass1.value, cl_followmodel_side_limit.value, frametime*cl_followmodel_up_highpass1.value, cl_followmodel_up_limit.value, cl.gunorg_highpass, gunorg);
VectorCopy(vieworg, cl.gunorg_prev);
+ VectorSubtract(cl.gunorg_highpass, cl.gunorg_prev, cl.gunorg_highpass);
+
+ // in the highpass, we _store_ the DIFFERENCE to the actual view angles...
+ VectorAdd(cl.gunangles_highpass, cl.gunangles_prev, cl.gunangles_highpass);
+ cl.gunangles_highpass[PITCH] += 360 * floor((viewangles[PITCH] - cl.gunangles_highpass[PITCH]) / 360 + 0.5);
+ cl.gunangles_highpass[YAW] += 360 * floor((viewangles[YAW] - cl.gunangles_highpass[YAW]) / 360 + 0.5);
+ cl.gunangles_highpass[ROLL] += 360 * floor((viewangles[ROLL] - cl.gunangles_highpass[ROLL]) / 360 + 0.5);
+ highpass3_limited(viewangles, frametime*cl_leanmodel_up_highpass1.value, cl_leanmodel_up_limit.value, frametime*cl_leanmodel_side_highpass1.value, cl_leanmodel_side_limit.value, 0, 0, cl.gunangles_highpass, gunangles);
+ VectorCopy(viewangles, cl.gunangles_prev);
+ VectorSubtract(cl.gunangles_highpass, cl.gunangles_prev, cl.gunangles_highpass);
+
+ // 3. calculate the RAW adjustment vectors
+ gunorg[0] *= -cl_followmodel_side_speed.value;
+ gunorg[1] *= -cl_followmodel_side_speed.value;
+ gunorg[2] *= -cl_followmodel_up_speed.value;
+
+ gunangles[PITCH] *= -cl_leanmodel_up_speed.value;
+ gunangles[YAW] *= -cl_leanmodel_side_speed.value;
+ gunangles[ROLL] = 0;
+
+ // 4. perform highpass/lowpass on the adjustment vectors (turning velocity into acceleration!)
+ // trick: we must do the lowpass LAST, so the lowpass vector IS the final vector!
+ highpass3(gunorg, frametime*cl_followmodel_side_highpass.value, frametime*cl_followmodel_side_highpass.value, frametime*cl_followmodel_up_highpass.value, cl.gunorg_adjustment_highpass, gunorg);
+ lowpass3(gunorg, frametime*cl_followmodel_side_lowpass.value, frametime*cl_followmodel_side_lowpass.value, frametime*cl_followmodel_up_lowpass.value, cl.gunorg_adjustment_lowpass, gunorg);
+ // we assume here: PITCH = 0, YAW = 1, ROLL = 2
+ highpass3(gunangles, frametime*cl_leanmodel_up_highpass.value, frametime*cl_leanmodel_side_highpass.value, 0, cl.gunangles_adjustment_highpass, gunangles);
+ lowpass3(gunangles, frametime*cl_leanmodel_up_lowpass.value, frametime*cl_leanmodel_side_lowpass.value, 0, cl.gunangles_adjustment_lowpass, gunangles);
+
+ // 5. use the adjusted vectors
+ VectorAdd(vieworg, gunorg, gunorg);
+ VectorAdd(viewangles, gunangles, gunangles);
+ }
+ else
+ {
+ // Just initialize gunorg/gunangles.
+ VectorCopy(vieworg, gunorg);
+ VectorCopy(viewangles, gunangles);
}
-
- // 2. for the gun origin, only keep the high frequency (non-DC) parts, which is "somewhat like velocity"
- VectorAdd(cl.gunorg_highpass, cl.gunorg_prev, cl.gunorg_highpass);
- highpass3_limited(vieworg, frametime*cl_followmodel_side_highpass1.value, cl_followmodel_side_limit.value, frametime*cl_followmodel_side_highpass1.value, cl_followmodel_side_limit.value, frametime*cl_followmodel_up_highpass1.value, cl_followmodel_up_limit.value, cl.gunorg_highpass, gunorg);
- VectorCopy(vieworg, cl.gunorg_prev);
- VectorSubtract(cl.gunorg_highpass, cl.gunorg_prev, cl.gunorg_highpass);
-
- // in the highpass, we _store_ the DIFFERENCE to the actual view angles...
- VectorAdd(cl.gunangles_highpass, cl.gunangles_prev, cl.gunangles_highpass);
- cl.gunangles_highpass[PITCH] += 360 * floor((viewangles[PITCH] - cl.gunangles_highpass[PITCH]) / 360 + 0.5);
- cl.gunangles_highpass[YAW] += 360 * floor((viewangles[YAW] - cl.gunangles_highpass[YAW]) / 360 + 0.5);
- cl.gunangles_highpass[ROLL] += 360 * floor((viewangles[ROLL] - cl.gunangles_highpass[ROLL]) / 360 + 0.5);
- highpass3_limited(viewangles, frametime*cl_leanmodel_up_highpass1.value, cl_leanmodel_up_limit.value, frametime*cl_leanmodel_side_highpass1.value, cl_leanmodel_side_limit.value, 0, 0, cl.gunangles_highpass, gunangles);
- VectorCopy(viewangles, cl.gunangles_prev);
- VectorSubtract(cl.gunangles_highpass, cl.gunangles_prev, cl.gunangles_highpass);
-
- // 3. calculate the RAW adjustment vectors
- gunorg[0] *= (cl_followmodel.value ? -cl_followmodel_side_speed.value : 0);
- gunorg[1] *= (cl_followmodel.value ? -cl_followmodel_side_speed.value : 0);
- gunorg[2] *= (cl_followmodel.value ? -cl_followmodel_up_speed.value : 0);
-
- gunangles[PITCH] *= (cl_leanmodel.value ? -cl_leanmodel_up_speed.value : 0);
- gunangles[YAW] *= (cl_leanmodel.value ? -cl_leanmodel_side_speed.value : 0);
- gunangles[ROLL] = 0;
-
- // 4. perform highpass/lowpass on the adjustment vectors (turning velocity into acceleration!)
- // trick: we must do the lowpass LAST, so the lowpass vector IS the final vector!
- highpass3(gunorg, frametime*cl_followmodel_side_highpass.value, frametime*cl_followmodel_side_highpass.value, frametime*cl_followmodel_up_highpass.value, cl.gunorg_adjustment_highpass, gunorg);
- lowpass3(gunorg, frametime*cl_followmodel_side_lowpass.value, frametime*cl_followmodel_side_lowpass.value, frametime*cl_followmodel_up_lowpass.value, cl.gunorg_adjustment_lowpass, gunorg);
- // we assume here: PITCH = 0, YAW = 1, ROLL = 2
- highpass3(gunangles, frametime*cl_leanmodel_up_highpass.value, frametime*cl_leanmodel_side_highpass.value, 0, cl.gunangles_adjustment_highpass, gunangles);
- lowpass3(gunangles, frametime*cl_leanmodel_up_lowpass.value, frametime*cl_leanmodel_side_lowpass.value, 0, cl.gunangles_adjustment_lowpass, gunangles);
-
- // 5. use the adjusted vectors
- VectorAdd(vieworg, gunorg, gunorg);
- VectorAdd(viewangles, gunangles, gunangles);
// bounded XY speed, used by several effects below
- xyspeed = bound (0, sqrt(clvelocity[0]*clvelocity[0] + clvelocity[1]*clvelocity[1]), 400);
+ xyspeed = bound (0, sqrt(clvelocity[0]*clvelocity[0] + clvelocity[1]*clvelocity[1]), cl_bob_velocity_limit.value);
// vertical view bobbing code
if (cl_bob.value && cl_bobcycle.value)
{
+ float bob_limit = cl_bob_limit.value;
+
+ if (cl_bob_limit_heightcheck.integer)
+ {
+ // use traces to determine what range the view can bob in, and scale down the bob as needed
+ float trace1fraction;
+ float trace2fraction;
+ vec3_t bob_height_check_dest;
+
+ // these multipliers are expanded a bit (the actual bob sin range is from -0.4 to 1.0) to reduce nearclip issues, especially on water surfaces
+ bob_height_check_dest[0] = vieworg[0];
+ bob_height_check_dest[1] = vieworg[1];
+ bob_height_check_dest[2] = vieworg[2] + cl_bob_limit.value * 1.1f;
+ trace = CL_TraceLine(vieworg, bob_height_check_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY | (cl_bob_limit_heightcheck_dontcrosswatersurface.integer ? SUPERCONTENTS_LIQUIDSMASK : 0), 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false, true);
+ trace1fraction = trace.fraction;
+
+ bob_height_check_dest[0] = vieworg[0];
+ bob_height_check_dest[1] = vieworg[1];
+ bob_height_check_dest[2] = vieworg[2] + cl_bob_limit.value * -0.5f;
+ trace = CL_TraceLine(vieworg, bob_height_check_dest, MOVE_NOMONSTERS, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_SKY | (cl_bob_limit_heightcheck_dontcrosswatersurface.integer ? SUPERCONTENTS_LIQUIDSMASK : 0), 0, MATERIALFLAGMASK_TRANSLUCENT, collision_extendmovelength.value, true, false, NULL, false, true);
+ trace2fraction = trace.fraction;
+
+ bob_limit *= min(trace1fraction, trace2fraction);
+ }
+
// LordHavoc: this code is *weird*, but not replacable (I think it
// should be done in QC on the server, but oh well, quake is quake)
// LordHavoc: figured out bobup: the time at which the sin is at 180
cycle = sin(M_PI + M_PI * (cycle-cl_bobup.value)/(1.0 - cl_bobup.value));
// bob is proportional to velocity in the xy plane
// (don't count Z, or jumping messes it up)
- bob = xyspeed * bound(0, cl_bob.value, 0.05);
+ bob = xyspeed * cl_bob.value;
+ bob = bound(0, bob, bob_limit);
bob = bob*0.3 + bob*0.7*cycle;
vieworg[2] += bob;
// we also need to adjust gunorg, or this appears like pushing the gun!
cycle = cos(M_PI * cycle / 0.5); // cos looks better here with the other view bobbing using sin
else
cycle = cos(M_PI + M_PI * (cycle-0.5)/0.5);
- bob = bound(0, cl_bob2.value, 0.05) * cycle;
+ bob = cl_bob2.value * cycle;
// this value slowly decreases from 1 to 0 when we stop touching the ground.
// The cycle is later multiplied with it so the view smooths back to normal
// calculate the front and side of the player between the X and Y axes
AngleVectors(viewangles, forward, right, up);
// now get the speed based on those angles. The bounds should match the same value as xyspeed's
- side = bound(-400, DotProduct (clvelocity, right) * cl.bob2_smooth, 400);
- front = bound(-400, DotProduct (clvelocity, forward) * cl.bob2_smooth, 400);
+ side = bound(-cl_bob_velocity_limit.value, DotProduct (clvelocity, right) * cl.bob2_smooth, cl_bob_velocity_limit.value);
+ front = bound(-cl_bob_velocity_limit.value, DotProduct (clvelocity, forward) * cl.bob2_smooth, cl_bob_velocity_limit.value);
VectorScale(forward, bob, forward);
VectorScale(right, bob, right);
// we use side with forward and front with right, so the bobbing goes
viewangles[2] += v_idlescale.value * sin(cl.time*v_iroll_cycle.value) * v_iroll_level.value;
}
Matrix4x4_CreateFromQuakeEntity(&r_refdef.view.matrix, vieworg[0], vieworg[1], vieworg[2], viewangles[0], viewangles[1], viewangles[2], 1);
+ if (v_yshearing.value > 0)
+ Matrix4x4_QuakeToDuke3D(&r_refdef.view.matrix, &r_refdef.view.matrix, v_yshearing.value);
// calculate a viewmodel matrix for use in view-attached entities
Matrix4x4_Copy(&viewmodelmatrix_nobob, &r_refdef.view.matrix);
Matrix4x4_ConcatScale(&viewmodelmatrix_nobob, cl_viewmodel_scale.value);
Matrix4x4_CreateFromQuakeEntity(&viewmodelmatrix_withbob, gunorg[0], gunorg[1], gunorg[2], gunangles[0], gunangles[1], gunangles[2], cl_viewmodel_scale.value);
+ if (v_yshearing.value > 0)
+ Matrix4x4_QuakeToDuke3D(&viewmodelmatrix_withbob, &viewmodelmatrix_withbob, v_yshearing.value);
+
VectorCopy(vieworg, cl.csqc_vieworiginfromengine);
VectorCopy(viewangles, cl.csqc_viewanglesfromengine);
Cvar_RegisterVariable (&cl_bobmodel_side);
Cvar_RegisterVariable (&cl_bobmodel_up);
Cvar_RegisterVariable (&cl_bobmodel_speed);
+ Cvar_RegisterVariable (&cl_bob_limit);
+ Cvar_RegisterVariable (&cl_bob_limit_heightcheck);
+ Cvar_RegisterVariable (&cl_bob_limit_heightcheck_dontcrosswatersurface);
+ Cvar_RegisterVariable (&cl_bob_velocity_limit);
Cvar_RegisterVariable (&cl_leanmodel);
Cvar_RegisterVariable (&cl_leanmodel_side_speed);
Cvar_RegisterVariable (&v_deathtilt);
Cvar_RegisterVariable (&v_deathtiltangle);
+
+ Cvar_RegisterVariable (&v_yshearing);
}
projects / xonotic / darkplaces.git / blobdiff