X-Git-Url: http://de.git.xonotic.org/?p=xonotic%2Fdarkplaces.git;a=blobdiff_plain;f=host.c;h=78b87dde59ac03ab9ef6972bfc7b5aa57cd51cf5;hp=2e9515a588b38859a7a19d4eaa077be8531f66be;hb=749072a8f60b88ef37448e224e83944b7096e909;hpb=f24f7ad3afa704443b1720a61b6814f1c780dfa9 diff --git a/host.c b/host.c index 2e9515a5..78b87dde 100644 --- a/host.c +++ b/host.c @@ -61,35 +61,35 @@ client_t *host_client; jmp_buf host_abortframe; // pretend frames take this amount of time (in seconds), 0 = realtime -cvar_t host_framerate = {0, "host_framerate","0", "locks frame timing to this value in seconds, 0.05 is 20fps for example, note that this can easily run too fast, use cl_maxfps if you want to limit your framerate instead, or sys_ticrate to limit server speed"}; -cvar_t cl_maxphysicsframesperserverframe = {0, "cl_maxphysicsframesperserverframe","10", "maximum number of physics frames per server frame"}; +cvar_t host_framerate = {CVAR_CLIENT | CVAR_SERVER, "host_framerate","0", "locks frame timing to this value in seconds, 0.05 is 20fps for example, note that this can easily run too fast, use cl_maxfps if you want to limit your framerate instead, or sys_ticrate to limit server speed"}; +cvar_t cl_maxphysicsframesperserverframe = {CVAR_CLIENT, "cl_maxphysicsframesperserverframe","10", "maximum number of physics frames per server frame"}; // shows time used by certain subsystems -cvar_t host_speeds = {0, "host_speeds","0", "reports how much time is used in server/graphics/sound"}; -cvar_t host_maxwait = {0, "host_maxwait","1000", "maximum sleep time requested from the operating system in millisecond. Larger sleeps will be done using multiple host_maxwait length sleeps. Lowering this value will increase CPU load, but may help working around problems with accuracy of sleep times."}; -cvar_t cl_minfps = {CVAR_SAVE, "cl_minfps", "40", "minimum fps target - while the rendering performance is below this, it will drift toward lower quality"}; -cvar_t cl_minfps_fade = {CVAR_SAVE, "cl_minfps_fade", "1", "how fast the quality adapts to varying framerate"}; -cvar_t cl_minfps_qualitymax = {CVAR_SAVE, "cl_minfps_qualitymax", "1", "highest allowed drawdistance multiplier"}; -cvar_t cl_minfps_qualitymin = {CVAR_SAVE, "cl_minfps_qualitymin", "0.25", "lowest allowed drawdistance multiplier"}; -cvar_t cl_minfps_qualitymultiply = {CVAR_SAVE, "cl_minfps_qualitymultiply", "0.2", "multiplier for quality changes in quality change per second render time (1 assumes linearity of quality and render time)"}; -cvar_t cl_minfps_qualityhysteresis = {CVAR_SAVE, "cl_minfps_qualityhysteresis", "0.05", "reduce all quality increments by this to reduce flickering"}; -cvar_t cl_minfps_qualitystepmax = {CVAR_SAVE, "cl_minfps_qualitystepmax", "0.1", "maximum quality change in a single frame"}; -cvar_t cl_minfps_force = {0, "cl_minfps_force", "0", "also apply quality reductions in timedemo/capturevideo"}; -cvar_t cl_maxfps = {CVAR_SAVE, "cl_maxfps", "0", "maximum fps cap, 0 = unlimited, if game is running faster than this it will wait before running another frame (useful to make cpu time available to other programs)"}; -cvar_t cl_maxfps_alwayssleep = {0, "cl_maxfps_alwayssleep","1", "gives up some processing time to other applications each frame, value in milliseconds, disabled if cl_maxfps is 0"}; -cvar_t cl_maxidlefps = {CVAR_SAVE, "cl_maxidlefps", "20", "maximum fps cap when the game is not the active window (makes cpu time available to other programs"}; - -cvar_t developer = {CVAR_SAVE, "developer","0", "shows debugging messages and information (recommended for all developers and level designers); the value -1 also suppresses buffering and logging these messages"}; -cvar_t developer_extra = {0, "developer_extra", "0", "prints additional debugging messages, often very verbose!"}; -cvar_t developer_insane = {0, "developer_insane", "0", "prints huge streams of information about internal workings, entire contents of files being read/written, etc. Not recommended!"}; -cvar_t developer_loadfile = {0, "developer_loadfile","0", "prints name and size of every file loaded via the FS_LoadFile function (which is almost everything)"}; -cvar_t developer_loading = {0, "developer_loading","0", "prints information about files as they are loaded or unloaded successfully"}; -cvar_t developer_entityparsing = {0, "developer_entityparsing", "0", "prints detailed network entities information each time a packet is received"}; - -cvar_t timestamps = {CVAR_SAVE, "timestamps", "0", "prints timestamps on console messages"}; -cvar_t timeformat = {CVAR_SAVE, "timeformat", "[%Y-%m-%d %H:%M:%S] ", "time format to use on timestamped console messages"}; - -cvar_t sessionid = {CVAR_READONLY, "sessionid", "", "ID of the current session (use the -sessionid parameter to set it); this is always either empty or begins with a dot (.)"}; -cvar_t locksession = {0, "locksession", "0", "Lock the session? 0 = no, 1 = yes and abort on failure, 2 = yes and continue on failure"}; +cvar_t host_speeds = {CVAR_CLIENT | CVAR_SERVER, "host_speeds","0", "reports how much time is used in server/graphics/sound"}; +cvar_t host_maxwait = {CVAR_CLIENT | CVAR_SERVER, "host_maxwait","1000", "maximum sleep time requested from the operating system in millisecond. Larger sleeps will be done using multiple host_maxwait length sleeps. Lowering this value will increase CPU load, but may help working around problems with accuracy of sleep times."}; +cvar_t cl_minfps = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps", "40", "minimum fps target - while the rendering performance is below this, it will drift toward lower quality"}; +cvar_t cl_minfps_fade = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_fade", "1", "how fast the quality adapts to varying framerate"}; +cvar_t cl_minfps_qualitymax = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitymax", "1", "highest allowed drawdistance multiplier"}; +cvar_t cl_minfps_qualitymin = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitymin", "0.25", "lowest allowed drawdistance multiplier"}; +cvar_t cl_minfps_qualitymultiply = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitymultiply", "0.2", "multiplier for quality changes in quality change per second render time (1 assumes linearity of quality and render time)"}; +cvar_t cl_minfps_qualityhysteresis = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualityhysteresis", "0.05", "reduce all quality increments by this to reduce flickering"}; +cvar_t cl_minfps_qualitystepmax = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitystepmax", "0.1", "maximum quality change in a single frame"}; +cvar_t cl_minfps_force = {CVAR_CLIENT, "cl_minfps_force", "0", "also apply quality reductions in timedemo/capturevideo"}; +cvar_t cl_maxfps = {CVAR_CLIENT | CVAR_SAVE, "cl_maxfps", "0", "maximum fps cap, 0 = unlimited, if game is running faster than this it will wait before running another frame (useful to make cpu time available to other programs)"}; +cvar_t cl_maxfps_alwayssleep = {CVAR_CLIENT, "cl_maxfps_alwayssleep","1", "gives up some processing time to other applications each frame, value in milliseconds, disabled if cl_maxfps is 0"}; +cvar_t cl_maxidlefps = {CVAR_CLIENT | CVAR_SAVE, "cl_maxidlefps", "20", "maximum fps cap when the game is not the active window (makes cpu time available to other programs"}; + +cvar_t developer = {CVAR_CLIENT | CVAR_SERVER | CVAR_SAVE, "developer","0", "shows debugging messages and information (recommended for all developers and level designers); the value -1 also suppresses buffering and logging these messages"}; +cvar_t developer_extra = {CVAR_CLIENT | CVAR_SERVER, "developer_extra", "0", "prints additional debugging messages, often very verbose!"}; +cvar_t developer_insane = {CVAR_CLIENT | CVAR_SERVER, "developer_insane", "0", "prints huge streams of information about internal workings, entire contents of files being read/written, etc. Not recommended!"}; +cvar_t developer_loadfile = {CVAR_CLIENT | CVAR_SERVER, "developer_loadfile","0", "prints name and size of every file loaded via the FS_LoadFile function (which is almost everything)"}; +cvar_t developer_loading = {CVAR_CLIENT | CVAR_SERVER, "developer_loading","0", "prints information about files as they are loaded or unloaded successfully"}; +cvar_t developer_entityparsing = {CVAR_CLIENT, "developer_entityparsing", "0", "prints detailed network entities information each time a packet is received"}; + +cvar_t timestamps = {CVAR_CLIENT | CVAR_SERVER | CVAR_SAVE, "timestamps", "0", "prints timestamps on console messages"}; +cvar_t timeformat = {CVAR_CLIENT | CVAR_SERVER | CVAR_SAVE, "timeformat", "[%Y-%m-%d %H:%M:%S] ", "time format to use on timestamped console messages"}; + +cvar_t sessionid = {CVAR_CLIENT | CVAR_SERVER | CVAR_READONLY, "sessionid", "", "ID of the current session (use the -sessionid parameter to set it); this is always either empty or begins with a dot (.)"}; +cvar_t locksession = {CVAR_CLIENT | CVAR_SERVER, "locksession", "0", "Lock the session? 0 = no, 1 = yes and abort on failure, 2 = yes and continue on failure"}; /* ================ @@ -195,7 +195,7 @@ static void Host_ServerOptions (void) if (COM_CheckParm ("-listen")) Con_Printf ("Only one of -dedicated or -listen can be specified\n"); // default sv_public on for dedicated servers (often hosted by serious administrators), off for listen servers (often hosted by clueless users) - Cvar_SetValue("sv_public", 1); + Cvar_SetValue(&cvars_all, "sv_public", 1); } else if (cl_available) { @@ -229,14 +229,16 @@ static void Host_ServerOptions (void) Host_InitLocal ====================== */ -void Host_SaveConfig_f(void); -void Host_LoadConfig_f(void); +void Host_SaveConfig_f(cmd_state_t *cmd); +void Host_LoadConfig_f(cmd_state_t *cmd); extern cvar_t sv_writepicture_quality; extern cvar_t r_texture_jpeg_fastpicmip; static void Host_InitLocal (void) { - Cmd_AddCommand("saveconfig", Host_SaveConfig_f, "save settings to config.cfg (or a specified filename) immediately (also automatic when quitting)"); - Cmd_AddCommand("loadconfig", Host_LoadConfig_f, "reset everything and reload configs"); + Cmd_AddCommand(&cmd_client, "saveconfig", Host_SaveConfig_f, "save settings to config.cfg (or a specified filename) immediately (also automatic when quitting)"); + Cmd_AddCommand(&cmd_client, "loadconfig", Host_LoadConfig_f, "reset everything and reload configs"); + Cmd_AddCommand(&cmd_server, "saveconfig", Host_SaveConfig_f, "save settings to config.cfg (or a specified filename) immediately (also automatic when quitting)"); + Cmd_AddCommand(&cmd_server, "loadconfig", Host_LoadConfig_f, "reset everything and reload configs"); Cvar_RegisterVariable (&cl_maxphysicsframesperserverframe); Cvar_RegisterVariable (&host_framerate); @@ -293,7 +295,7 @@ static void Host_SaveConfig_to(const char *file) } Key_WriteBindings (f); - Cvar_WriteVariables (f); + Cvar_WriteVariables (&cvars_all, f); FS_Close (f); } @@ -302,30 +304,30 @@ void Host_SaveConfig(void) { Host_SaveConfig_to(CONFIGFILENAME); } -void Host_SaveConfig_f(void) +void Host_SaveConfig_f(cmd_state_t *cmd) { const char *file = CONFIGFILENAME; - if(Cmd_Argc() >= 2) { - file = Cmd_Argv(1); + if(Cmd_Argc(cmd) >= 2) { + file = Cmd_Argv(cmd, 1); Con_Printf("Saving to %s\n", file); } Host_SaveConfig_to(file); } -static void Host_AddConfigText(void) +static void Host_AddConfigText(cmd_state_t *cmd) { // set up the default startmap_sp and startmap_dm aliases (mods can // override these) and then execute the quake.rc startup script if (gamemode == GAME_NEHAHRA) - Cbuf_InsertText("alias startmap_sp \"map nehstart\"\nalias startmap_dm \"map nehstart\"\nexec " STARTCONFIGFILENAME "\n"); + Cbuf_InsertText(cmd, "alias startmap_sp \"map nehstart\"\nalias startmap_dm \"map nehstart\"\nexec " STARTCONFIGFILENAME "\n"); else if (gamemode == GAME_TRANSFUSION) - Cbuf_InsertText("alias startmap_sp \"map e1m1\"\n""alias startmap_dm \"map bb1\"\nexec " STARTCONFIGFILENAME "\n"); + Cbuf_InsertText(cmd, "alias startmap_sp \"map e1m1\"\n""alias startmap_dm \"map bb1\"\nexec " STARTCONFIGFILENAME "\n"); else if (gamemode == GAME_TEU) - Cbuf_InsertText("alias startmap_sp \"map start\"\nalias startmap_dm \"map start\"\nexec teu.rc\n"); + Cbuf_InsertText(cmd, "alias startmap_sp \"map start\"\nalias startmap_dm \"map start\"\nexec teu.rc\n"); else - Cbuf_InsertText("alias startmap_sp \"map start\"\nalias startmap_dm \"map start\"\nexec " STARTCONFIGFILENAME "\n"); + Cbuf_InsertText(cmd, "alias startmap_sp \"map start\"\nalias startmap_dm \"map start\"\nexec " STARTCONFIGFILENAME "\n"); } /* @@ -335,16 +337,16 @@ Host_LoadConfig_f Resets key bindings and cvars to defaults and then reloads scripts =============== */ -void Host_LoadConfig_f(void) +void Host_LoadConfig_f(cmd_state_t *cmd) { // reset all cvars, commands and aliases to init values Cmd_RestoreInitState(); #ifdef CONFIG_MENU // prepend a menu restart command to execute after the config - Cbuf_InsertText("\nmenu_restart\n"); + Cbuf_InsertText(&cmd_client, "\nmenu_restart\n"); #endif // reset cvars to their defaults, and then exec startup scripts again - Host_AddConfigText(); + Host_AddConfigText(&cmd_client); } /* @@ -632,14 +634,14 @@ Add them exactly as if they had been typed at the console */ static void Host_GetConsoleCommands (void) { - char *cmd; + char *line; - while (1) + while ((line = Sys_ConsoleInput())) { - cmd = Sys_ConsoleInput (); - if (!cmd) - break; - Cbuf_AddText (cmd); + if (cls.state == ca_dedicated) + Cbuf_AddText(&cmd_server, line); + else + Cbuf_AddText(&cmd_client, line); } } @@ -742,9 +744,9 @@ void Host_Main(void) } if (slowmo.value < 0.00001 && slowmo.value != 0) - Cvar_SetValue("slowmo", 0); + Cvar_SetValueQuick(&slowmo, 0); if (host_framerate.value < 0.00001 && host_framerate.value != 0) - Cvar_SetValue("host_framerate", 0); + Cvar_SetValueQuick(&host_framerate, 0); TaskQueue_Frame(false); @@ -779,7 +781,8 @@ void Host_Main(void) // process console commands // R_TimeReport("preconsole"); CL_VM_PreventInformationLeaks(); - Cbuf_Frame(); + Cbuf_Frame(&cmd_client); + Cbuf_Frame(&cmd_server); // R_TimeReport("console"); } @@ -1094,8 +1097,6 @@ char engineversion[128]; qboolean sys_nostdout = false; -extern qboolean host_stuffcmdsrun; - static qfile_t *locksession_fh = NULL; static qboolean locksession_run = false; static void Host_InitSession(void) @@ -1165,6 +1166,8 @@ static void Host_Init (void) int i; const char* os; char vabuf[1024]; + qboolean dedicated_server = COM_CheckParm("-dedicated") || !cl_available; + cmd_state_t *cmd = &cmd_client; if (COM_CheckParm("-profilegameonly")) Sys_AllowProfiling(false); @@ -1215,6 +1218,8 @@ static void Host_Init (void) // initialize console command/cvar/alias/command execution systems Cmd_Init(); + Cmd_Init_Commands(dedicated_server); + // initialize memory subsystem cvars/commands Memory_Init_Commands(); @@ -1224,7 +1229,6 @@ static void Host_Init (void) // initialize various cvars that could not be initialized earlier u8_Init(); Curl_Init_Commands(); - Cmd_Init_Commands(); Sys_Init_Commands(); COM_Init_Commands(); FS_Init_Commands(); @@ -1273,9 +1277,13 @@ static void Host_Init (void) Host_ServerOptions(); Thread_Init(); + TaskQueue_Init(); if (cls.state == ca_dedicated) - Cmd_AddCommand ("disconnect", CL_Disconnect_f, "disconnect from server (or disconnect all clients if running a server)"); + { + cmd = &cmd_server; + Cmd_AddCommand(&cmd_server, "disconnect", CL_Disconnect_f, "disconnect from server (or disconnect all clients if running a server)"); + } else { Con_DPrintf("Initializing client\n"); @@ -1306,14 +1314,14 @@ static void Host_Init (void) return; } - Host_AddConfigText(); - Cbuf_Execute(); + Host_AddConfigText(cmd); + Cbuf_Execute(cmd); // if stuffcmds wasn't run, then quake.rc is probably missing, use default if (!host_stuffcmdsrun) { - Cbuf_AddText("exec default.cfg\nexec " CONFIGFILENAME "\nexec autoexec.cfg\nstuffcmds\n"); - Cbuf_Execute(); + Cbuf_AddText(cmd, "exec default.cfg\nexec " CONFIGFILENAME "\nexec autoexec.cfg\nstuffcmds\n"); + Cbuf_Execute(cmd); } // put up the loading image so the user doesn't stare at a black screen... @@ -1332,8 +1340,8 @@ static void Host_Init (void) if (i && i + 1 < com_argc) if (!sv.active && !cls.demoplayback && !cls.connect_trying) { - Cbuf_AddText(va(vabuf, sizeof(vabuf), "timedemo %s\n", com_argv[i + 1])); - Cbuf_Execute(); + Cbuf_AddText(&cmd_client, va(vabuf, sizeof(vabuf), "timedemo %s\n", com_argv[i + 1])); + Cbuf_Execute(&cmd_client); } // check for special demo mode @@ -1342,8 +1350,8 @@ static void Host_Init (void) if (i && i + 1 < com_argc) if (!sv.active && !cls.demoplayback && !cls.connect_trying) { - Cbuf_AddText(va(vabuf, sizeof(vabuf), "playdemo %s\n", com_argv[i + 1])); - Cbuf_Execute(); + Cbuf_AddText(&cmd_client, va(vabuf, sizeof(vabuf), "playdemo %s\n", com_argv[i + 1])); + Cbuf_Execute(&cmd_client); } // COMMANDLINEOPTION: Client: -capturedemo captures a playdemo and quits @@ -1351,23 +1359,23 @@ static void Host_Init (void) if (i && i + 1 < com_argc) if (!sv.active && !cls.demoplayback && !cls.connect_trying) { - Cbuf_AddText(va(vabuf, sizeof(vabuf), "playdemo %s\ncl_capturevideo 1\n", com_argv[i + 1])); - Cbuf_Execute(); + Cbuf_AddText(&cmd_client, va(vabuf, sizeof(vabuf), "playdemo %s\ncl_capturevideo 1\n", com_argv[i + 1])); + Cbuf_Execute(&cmd_client); } if (cls.state == ca_dedicated || COM_CheckParm("-listen")) if (!sv.active && !cls.demoplayback && !cls.connect_trying) { - Cbuf_AddText("startmap_dm\n"); - Cbuf_Execute(); + Cbuf_AddText(&cmd_client, "startmap_dm\n"); + Cbuf_Execute(&cmd_client); } if (!sv.active && !cls.demoplayback && !cls.connect_trying) { #ifdef CONFIG_MENU - Cbuf_AddText("togglemenu 1\n"); + Cbuf_AddText(&cmd_client, "togglemenu 1\n"); #endif - Cbuf_Execute(); + Cbuf_Execute(&cmd_client); } Con_DPrint("========Initialized=========\n"); @@ -1444,6 +1452,7 @@ void Host_Shutdown(void) } SV_StopThread(); + TaskQueue_Shutdown(); Thread_Shutdown(); Cmd_Shutdown(); Key_Shutdown();