1 .\" Process with groff -man -Tascii file.3
2 .TH GMQCC 1 2012-07-12 "" "gmqcc Manual"
4 gmqcc \- A Quake C compiler built from the NIH realm of sarcastic wit
7 [\fIOPTIONS\fR] [\fIfiles...\fR]
9 Traditionally, a QC compiler reads the file \fIprogs.src\fR which
10 in its first line contains the output filename, and the rest is a
11 list of QC source files that are to be compiled in order.
12 \fBgmqcc\fR optionally takes options to specify the output and
13 input files on the commandline, and also accepts assembly files.
15 \fBgmqcc\fR mostly tries to mimic gcc's commandline handling, though
16 there are also traditional long-options available.
19 Show a usage message and exit.
22 Turn on some compiler debugging mechanisms.
25 Turn on compiler mem-check. (Shows allocations and checks for leaks.)
27 .BI "-o, --output=" filename
28 Specify the output filename. Defaults to progs.dat. This will overwrite
29 the output file listed in a \fIprogs.src\fR file in case such a file is used.
32 Specify the optimization level
35 Highest optimization level
37 Default optimization level
39 Minimal optimization level
41 Disable optimization entirely
44 .BI "-O" name "\fR, " "" -Ono- name
45 Enable or disable a specific optimization. Note that these options
46 must be used after setting the optimization level, otherwise they'll
50 List all possible optimizations and the optimization level they're
54 Be less verbose. In particular removes the messages about which files
55 are being processed, and which compilation mode is being used, and
56 some others. Warnings and errors will of course still be displayed.
58 .BI -W warning "\fR, " "" -Wno- warning
59 Enable or disable a warning.
62 Enable all warnings. Overrides preceding -W parameters.
64 .BR -Werror ", " -Wno-error
65 Controls whether or not all warnings should be treated as errors.
67 .BI -Werror- warning "\fR, " "" -Wno-error- warning
68 Controls whether a specific warning should be an error.
71 List all possible warn flags.
73 .BI -f flag "\fR, " "" -fno- flag
74 Enable or disable a specific compile flag. See the list of flags
78 List all possible compile flags.
81 Disables colored output
84 Use an ini file to read all the -O, -W and -f flag from. See the
85 CONFIG section about the file format.
88 Redirects standard output to a \fIfile\fR
91 Redirects standard error to a \fIfile\fR
94 Use the specified standard for parsing QC code. The following standards
96 .IR gmqcc , qcc , fteqcc
97 Selecting a standard also implies some -f options and behaves as if
98 those options have been written right after the -std option, meaning
99 if you changed them before the -std option, you're now overwriting
102 .BR -std=gmqcc " includes:"
104 -fadjust-vector-fields
106 .BR -std=qcc " includes:"
109 -fassign-function-types
110 -f\fIno-\fRadjust-vector-fields
113 .BR -std=fteqcc " includes:"
117 -ftranslatable-strings
118 -fassign-function-types
120 -f\fIno-\fRadjust-vector-fields
121 -f\fIno-\fRcorrect-ternary
126 DEBUG OPTION. Print the code's intermediate representation before the
127 optimization and finalization passes to stdout before generating the
131 DEBUG OPTION. Print the code's intermediate representation after the
132 optimization and finalization passes to stdout before generating the
133 binary. The instructions will be enumerated, and values will contain a
138 Generate a warning about variables which are declared but never used.
139 This can be avoided by adding the \fInoref\fR keyword in front of the
140 variable declaration. Additionally a complete section of unreferenced
141 variables can be opened using \fI#pragma noref 1\fR, and closed via
142 \fI#pragma noref 0\fR.
144 .B -Wused-uninitialized
145 Generate a warning if it is possible that a variable can be used
146 without prior initialization. Note that this warning is not
147 necessarily reliable if the initialization happens only under certain
148 conditions. The other way is \fInot\fR possible: that the warning is
149 \fInot\fR generated when uninitialized use \fIis possible\fR.
151 .B -Wunknown-control-sequence
152 Generate an error when an unrecognized control sequence in a string is
153 used. Meaning: when there's a character after a backslash in a string
154 which has no known meaning.
157 Warn when using special extensions which are not part of the selected
160 .B -Wfield-redeclared
161 Generally QC compilers ignore redeclaration of fields. Here you can
162 optionally enable a warning.
164 .B -Wmissing-return-values
165 Functions which aren't of type \fIvoid\fR will warn if it possible to
166 reach the end without returning an actual value.
168 .B -Wtoo-few-parameters
169 Warn about a function call with fewer parameters than the function
173 Warn when a locally declared variable shadows variable.
176 Warn when the initialization of a local variable turns the variable
177 into a constant. This is default behaviour unless
178 \fI-finitialized-nonconstants\fR is used.
181 There are only 2 known global variables of type void: end_sys_globals
182 and end_sys_fields. Any other void-variable will warn.
184 .B -Wimplicit-function-pointer
185 A global function which is not declared with the \fIvar\fR keyword is
186 expected to have an implementing body, or be a builtin. If neither is
187 the case, it implicitly becomes a function pointer, and a warning is
190 .B -Wvariadic-function
191 Currently there's no way for an in QC implemented function to access
192 variadic parameters. If a function with variadic parameters has an
193 implementing body, a warning will be generated.
196 Generate warnings about \fI$frame\fR commands, for instance about
197 duplicate frame definitions.
199 .B -Weffectless-statement
200 Warn about statements which have no effect. Any expression which does
201 not call a function or assigns a variable.
204 The \fIend_sys_fields\fR variable is supposed to be a global variable
205 of type \fIvoid\fR. It is also recognized as a \fIfield\fR but this
206 will generate a warning.
208 .B -Wassign-function-types
209 Warn when assigning to a function pointer with an unmatching
210 signature. This usually happens in cases like assigning the null
211 function to an entity's .think function pointer.
214 Enable warnings coming from the preprocessor. Like duplicate macro
215 declarations. This warning triggers when there's a problem with the
216 way the preprocessor has been used, it will \fBnot\fR affect warnings
217 generated with the '#warning' directive. See -Wcpp.
220 Show warnings created using the preprocessor's '#warning' directive.
223 Warn if there's a preprocessor \fI#if\fR spanning across several
226 .B -Wdouble-declaration
227 Warn about multiple declarations of globals. This seems pretty common
228 in QC code so you probably do not want this unless you want to clean
232 The combination of \fIconst\fR and \fIvar\fR is not illegal, however
233 different compilers may handle them differently. We were told, the
234 intention is to create a function-pointer which is not assignable.
235 This is exactly how we interpret it. However for this interpretation
236 the \fIvar\fR keyword is considered superfluous (and philosophically
237 wrong), so it is possible to generate a warning about this.
239 .B -Wmultibyte-character
240 Warn about multibyte character constants, they do not work right now.
242 .B -Wternary-precedence
243 Warn if a ternary expression which contains a comma operator is used
244 without enclosing parenthesis, since this is most likely not what you
245 actually want. We recommend the \fI-fcorrect-ternary\fR option.
248 Warn when encountering an unrecognized \fI#pragma\fR line.
250 .B -Wunreachable-code
251 Warn about unreachable code. That is: code after a return statement,
252 or code after a call to a function marked as 'noreturn'.
255 Enable some warnings added in order to help debugging in the compiler.
257 .B -Wunknown-attribute
258 Warn on an unknown attribute. The warning will inlclude only the first
259 token inside the enclosing attribute-brackets. This may change when
260 the actual attribute syntax is better defined.
263 Warn when using reserved names such as 'nil'.
265 .B -Wuninitialized-constant
266 Warn about global constants (using the 'const' keyword) with no
269 .B -Wuninitialized-global
270 Warn about global variables with no initializing value. This is off by
271 default, and is added mostly to help find null-values which are
272 supposed to be replaced by the untyped 'nil' constant.
275 .B -fdarkplaces-string-table-bug
276 Add some additional characters to the string table in order to
277 compensate for a wrong boundcheck in some specific version of the
280 .B -fadjust-vector-fields
281 When assigning to field pointers of type \fI.vector\fR the common
282 behaviour in compilers like \fIfteqcc\fR is to only assign the
283 x-component of the pointer. This means that you can use the vector as
284 such, but you cannot use its y and z components directly. This flag
285 fixes this behaviour. Before using it make sure your code does not
286 depend on the buggy behaviour.
289 Enable a partially fteqcc-compatible preprocessor. It supports all the
290 features used in the Xonotic codebase. If you need more, write a
294 Enable some predefined macros. This only works in combination with
295 \'-fftepp' and is currently not included by '-std=fteqcc'. The
296 following macros will be added:
307 Note that fteqcc also defines __FUNC__, __TIME__, __DATE__ and
308 __NULL__, which are not yet implemented.
311 Allow switch cases to use non constant variables.
314 Perform early out in logical AND and OR expressions. The final result
315 will be either a 0 or a 1, see the next flag for more possibilities.
318 In many languages, logical expressions perform early out in a special
319 way: If the left operand of an AND yeilds true, or the one of an OR
320 yields false, the complete expression evaluates to the right side.
321 Thus \fItrue && 5\fI evaluates to 5 rather than 1.
323 .B -ftranslatable-strings
324 Enable the underscore intrinsic: Using \fI_("A string constant")\fR
325 will cause the string immediate to get a name with a "dotranslate_"
326 prefix. The darkplaces engine recognizes these and translates them in
327 a way similar to how gettext works.
329 .B -finitialized-nonconstants
330 Don't implicitly convert initialized variables to constants. With this
331 flag, the \fIconst\fR keyword is required to make a constant.
333 .B -fassign-function-types
334 If this flag is not set, (and it is set by default in the qcc and
335 fteqcc standards), assigning function pointers of mismatching
336 signatures will result in an error rather than a warning.
339 Produce a linenumber file along with the output .dat file.
342 Use C's operator precedence for ternary expressions. Unless your code
343 depends on fteqcc-compatible behaviour, you'll want to use thi
346 .B -fsingle-vector-defs
347 Normally vectors generate 4 defs, once for the vector, and once for
348 its components with _x, _y, _z suffixes. This option
349 prevents components from being listed.
352 Most QC compilers translate if(a_vector) directly as an IF on the
353 vector, which means only the x-component is checked. This causes
354 vectors to be cast to actual booleans via a NOT_V and, if necessary, a
358 if (a_vector) // becomes
361 a = a_vector && a_float // becomes
362 a = !!a_vector && a_float
366 .B -ftrue-empty-strings
367 An empty string is considered to be true everywhere. The NOT_S
368 instruction usually considers an empty string to be false, this option
369 effectively causes the unary not in strings to use NOT_F instead.
371 .B -ffalse-empty-strings
372 An empty string is considered to be false everywhere. This means loops
373 and if statements which depend on a string will perform a NOT_S
374 instruction on the string before using it.
377 Enable utf8 characters. This allows utf-8 encoded character constants,
378 and escape sequence codepoints in the valid utf-8 range. Effectively
379 enabling escape sequences like '\\{x2211}'.
382 When a warning is treated as an error, and this option is set (which
383 it is by default), it is like any other error and will cause
384 compilation to stop. When disabling this flag by using
385 \-fno-bail-on-werror, compilation will continue until the end, but no
386 output is generated. Instead the first such error message's context is
390 Allow loops to be labeled, and allow 'break' and 'continue' to take an
391 optional label to decide which loop to actually jump out of or
396 for :outer (i = 0; i < n; ++i) {
407 Adds a global named 'nil' which is of no type and can be assigned to
408 anything. No typechecking will be performed on assignments. Assigning
409 to it is forbidden, using it in any other kind of expression is also
413 Various effects, usually to weaken some conditions.
415 .IP "with -funtyped-nil"
416 Allow local variables named 'nil'. (This will not allow declaring a
417 global of that name.)
421 Some general peephole optimizations. For instance the code `a = b + c`
422 typically generates 2 instructions, an ADD and a STORE. This
423 optimization removes the STORE and lets the ADD write directly into A.
426 Tail recursive function calls will be turned into loops to avoid the
427 overhead of the CALL and RETURN instructions.
430 Make all functions which use neither local arrays nor have locals
431 which are seen as possibly uninitialized use the same local section.
432 This should be pretty safe compared to other compilers which do not
433 check for uninitialized values properly. The problem is that there's
434 QC code out there which really doesn't initialize some values. This is
435 fine as long as this kind of optimization isn't used, but also, only
436 as long as the functions cannot be called in a recursive manner. Since
437 it's hard to know whether or not an array is actually fully
438 initialized, especially when initializing it via a loop, we assume
439 functions with arrays to be too dangerous for this optimization.
442 This promotes locally declared variables to "temps". Meaning when a
443 temporary result of an operation has to be stored somewhere, a local
444 variable which is not 'alive' at that point can be used to keep the
445 result. This can reduce the size of the global section.
446 This will not have declared variables overlap, even if it was
450 Causes temporary values which do not need to be backed up on a CALL to
451 not be stored in the function's locals-area. With this, a CALL to a
452 function may need to back up fewer values and thus execute faster.
454 .B -Ostrip-constant-names
455 Don't generate defs for immediate values or even declared constants.
456 Meaning variables which are implicitly constant or qualified as such
457 using the 'const' keyword.
460 Aggressively reuse strings in the string section. When a string should
461 be added which is the trailing substring of an already existing
462 string, the existing string's tail will be returned instead of the new
465 For example the following code will only generate 1 string:
469 print("Hell you!\\n");
470 print("you!\\n"); // trailing substring of "Hello you!\\n"
473 There's however one limitation. Strings are still processed in order,
474 so if the above print statements were reversed, this optimization
478 By default, all parameters of a CALL are copied into the
479 parameter-globals right before the CALL instructions. This is the
480 easiest and safest way to translate calls, but also adds a lot of
481 unnecessary copying and unnecessary temporary values. This
482 optimization makes operations which are used as a parameter evaluate
483 directly into the parameter-global if that is possible, which is when
484 there's no other CALL instruction in between.
487 Usually an empty RETURN instruction is added to the end of a void
488 typed function. However, additionally after every function a DONE
489 instruction is added for several reasons. (For example the qcvm's
490 disassemble switch uses it to know when the function ends.). This
491 optimization replaces that last RETURN with DONE rather than adding
492 the DONE additionally.
494 The configuration file is similar to regular .ini files. Comments
495 start with hashtags or semicolons, sections are written in square
496 brackets and in each section there can be arbitrary many key-value
499 There are 3 sections currently:
500 .IR flags ", " warnings ", and " optimizations .
501 They contain a list of boolean values of the form `VARNAME = true` or
502 `VARNAME = false`. The variable names are the same as for the
503 corresponding -W, -f or -O flag written with only capital letters and
504 dashes replaced by underscores.
509 # a GMQCC configuration file
512 ADJUST_VECTOR_FIELDS = false
516 UNUSED_VARIABLE = false
517 USED_UNINITIALIZED = true
521 TAIL_RECURSION = true
525 Currently the '-fftepp-predefs' flag is not included by '-std=fteqcc',
526 partially because it is not entirely conformant to fteqcc.
529 Please report bugs on <http://github.com/graphitemaster/gmqcc/issues>,
530 or see <http://graphitemaster.github.com/gmqcc> on how to contact us.
534 A documented example for a gmqcc.ini file.
538 See <http://graphitemaster.github.com/gmqcc>.
projects / xonotic / gmqcc.git / blob