seta crosshair_ring_reload_size 2.5 "reload ring size"
seta crosshair_ring_reload_alpha 0.2 "reload ring alpha"
+seta cl_reticle 1 "control for toggling whether ANY zoom reticles are shown"
seta cl_reticle_stretch 0 "whether to stretch reticles so they fit the screen (brakes image proportions)"
seta cl_reticle_item_nex 1 "draw aiming reticle for the nex weapon's zoom, 0 disables and values between 0 and 1 change alpha"
seta cl_reticle_item_normal 1 "draw reticle when zooming with the zoom button, 0 disables and values between 0 and 1 change alpha"
fov 90
seta cl_velocityzoom 0 "velocity based zooming of fov, negative values zoom out"
-seta cl_velocityzoomtime 0.3 "time value for averaging speed values"
+seta cl_velocityzoom_type 3 "how to factor in speed, 1 = all velocity in all directions, 2 = velocity only in forward direction (can be negative), 3 = velocity only in forward direction (limited to forward only)"
+seta cl_velocityzoom_speed 1000 "target speed for fov factoring"
+seta cl_velocityzoom_time 0.2 "time value for averaging speed values"
seta cl_zoomfactor 5 "how much +zoom will zoom (1-16)"
seta cl_zoomspeed 8 "how fast it will zoom (0.5-16), negative values mean instant zoom"
seta cl_zoomsensitivity 0 "how zoom changes sensitivity (0 = weakest, 1 = strongest)"
// menu_conwidth, menu_conheight are set inside quake.rc
v_deathtilt 0 // needed for spectators (who are dead to avoid prediction)
+// we want to use sRGB for our maps!
+exec sRGB-disable.cfg
+vid_sRGB_fallback 2
+r_hdr_glowintensity 1
+
// these settings determine how much the view is affected by movement/damage
cl_smoothviewheight 0.05 // time of the averaging to the viewheight value so that it creates a smooth transition for crouching and such. 0 for instant transition
cl_deathfade 0 // fade screen to dark red when dead, value represents how fast the fade is (higher is faster)
r_motionblur 0 // motion blur value, default is 0
r_damageblur 0 // motion blur when damaged, default is 0 (removed in Xonotic)
-r_bloom_blur 16
-r_bloom_brighten 2.5
-r_bloom_colorexponent 1
-r_bloom_colorscale 1
-r_bloom_colorsubtract 0.15
+r_bloom_blur 6
+r_bloom_brighten 1.5
+r_bloom_colorexponent 2
+r_bloom_colorscale 1.75
+r_bloom_colorsubtract 0.1
r_bloom_resolution 320
-r_hdr_range 4
seta vid_x11_display "" "xonotic-linux-*.sh will use this to start xonotic on an other/new X display"
// This can have three possible settings:
set sv_gibhealth 100 "Minus health a dead body must have in order to get gibbed"
// fragmessage: This allows extra information to be displayed with the frag centerprints.
-set sv_fragmessage_information_ping 1 "Enable ping display information, 0 = Never display; 1 = Always display (If the player is a bot, it will say bot instead of the ping.)"
-set sv_fragmessage_information_handicap 1 "Enable handicap display information, 0 = Never display; 1 = Only when the player has handicap on; 2 = Always display (Displays Off if off)"
-set sv_fragmessage_information_stats 1 "Enable statistics (health/armor) display information, 0 = Never display; 1 = Always display (Only available for the person who was killed)"
-set sv_fragmessage_information_typefrag 1 "Enable typefrag display information, 0 = Never display; 1 = Always display"
+set sv_fraginfo_ping 1 "Enable ping display information, 0 = Never display; 1 = Always display (If the player is a bot, it will say bot instead of the ping.)"
+set sv_fraginfo_handicap 1 "Enable handicap display information, 0 = Never display; 1 = Only when the player has handicap on; 2 = Always display (Displays Off if off)"
+set sv_fraginfo_stats 1 "Enable statistics (health/armor) display information, 0 = Never display; 1 = Always display (Only available for the person who was killed)"
+set sv_fraginfo_typefrag 1 "Enable typefrag display information, 0 = Never display; 1 = Always display"
// use default physics
set sv_friction_on_land 0
set sv_spectator_speed_multiplier 1.5
seta sv_spectate 1 "if set to 1, new clients are allowed to spectate or observe the game, if set to 0 joining clients spawn as players immediately (no spectating)"
seta sv_defaultcharacter 0 "master switch, if set to 1 the further configuration for replacing all player models, skins and colors is taken from the sv_defaultplayermodel, sv_defaultplayerskin and sv_defaultplayercolors variables"
-seta sv_defaultplayermodel "models/player/erebus.iqm" "default model selection, only works if sv_defaultcharacter is set to 1"
-seta sv_defaultplayerskin 0 "each model has 1 or more skins (combination of model and skin = character), set which skin of the model you wish the default character to have, only works if sv_defaultcharacter is set to 1"
+seta sv_defaultplayermodel "models/player/erebus.iqm" "default model selection, only works if sv_defaultcharacter is set to 1; you may append a :<skinnumber> suffix to model names; you can specify multiple, separated by space, and a random one will be chosen"
+seta sv_defaultplayerskin 0 "each model has 1 or more skins (combination of model and skin = character), set which skin of the model you wish the default character to have, only works if sv_defaultcharacter is set to 1; can be overriden by :<skinnumber> suffix in sv_defaultplayermodel"
seta sv_defaultplayermodel_red "" "\"\" means see sv_defaultplayermodel"
seta sv_defaultplayerskin_red 0
seta sv_defaultplayermodel_blue "" "\"\" means see sv_defaultplayermodel"
set g_maplist_check_waypoints 0 "when 1, maps are skipped if there currently are bots, but the map has no waypoints"
set samelevel 0 "when 1, always play the same level over and over again"
+set g_grab_range 200 "distance at which dragable objects can be grabbed"
+
set g_cloaked 0 "display all players mostly invisible"
set g_player_alpha 1
set g_player_brightness 0 "set to 2 for brighter players"
seta g_balance_cloaked_alpha 0.25
set g_sandbox 0 "allow players to spawn and edit objects around the map"
-set g_sandbox_info 1 "print non-critical information to the server"
-set g_sandbox_editor_maxobjects 100 "maximum number of objects a player can have at a time"
-set g_sandbox_editor_free 0 "when enabled, players can edit any object on the map, not just the objects they've spawned"
+set g_sandbox_info 1 "print object information to the server. 1 prints info about spawned / removed objects, 2 also prints info about edited objects"
+set g_sandbox_readonly 0 "when this mode is active, players cannot modify objects or use any sandbox commands"
+set g_sandbox_storage_name default "name of the selected storage to use"
+set g_sandbox_storage_autosave 5 "storage is automatically saved every specified number of seconds"
+set g_sandbox_storage_autoload 1 "if a storage file exists for the given map, automatically load it at startup"
+set g_sandbox_editor_flood 1 "players must wait this many seconds between spawning objects"
+set g_sandbox_editor_maxobjects 1000 "maximum number of objects that may exist at a time"
+set g_sandbox_editor_free 1 "0 = players can only copy or edit their own objects, 1 = players can copy but not edit other objects, 2 = players can copy and edit all object"
set g_sandbox_editor_distance_spawn 200 "distance at which objects spawn in front of the player"
-set g_sandbox_editor_distance_edit 350 "distance at which players can edit or remove objects they are looking at"
+set g_sandbox_editor_distance_edit 300 "distance at which players can edit or remove objects they are looking at"
set g_sandbox_object_scale_min 0.1 "minimum scale that objects can be set to"
set g_sandbox_object_scale_max 2 "maximum scale that objects can be set to"
set g_sandbox_object_material_velocity_min 100 "velocity objects must have while colliding for material effects to be applied"
set g_sandbox_object_material_velocity_factor 0.002 "velocity range which decides the intensity of material effects"
+set cl_sandbox_clipboard ""
seta menu_sandbox_spawn_model ""
seta menu_sandbox_attach_bone ""
seta menu_sandbox_edit_scale 1
seta menu_sandbox_edit_physics 1
seta menu_sandbox_edit_force 1
-seta menu_sandbox_edit_material 0
+seta menu_sandbox_edit_material ""
alias menu_showsandboxtools "menu_cmd directmenu SandboxTools"
bind f7 menu_showsandboxtools
seta g_freezetag_revive_extra_size 100 "Distance in qu that you can stand from a frozen teammate to keep reviving him"
seta g_freezetag_frozen_force 0.6 "How much to multiply the force on a frozen player with"
-// 50% of the spawns shall be far away from any players
-set g_spawn_furthest 0.5
+set g_spawn_furthest 0.5 "this amount of the spawns shall be far away from any players"
+set g_spawn_useallspawns 0 "use all spawns, e.g. also team spawns in non-teamplay, and all spawns, even enemy spawns, in teamplay"
// respawn delay
set g_respawn_delay 2 "number of seconds you have to wait before you can respawn again"
set g_respawn_waves 0 "respawn in waves (every n seconds), intended to decrease overwhelming base attacks"
r_mipsprites 1
r_mipskins 1
r_shadow_realtime_world_lightmaps 1
-seta r_ambient 4
cl_decals_fadetime 5
cl_decals_time 2
seta cl_gunalign 3 "Gun alignment; 1 = center (if allowed by g_shootfromclient) or right, 2 = center (if allowed by g_shootfromclient) or left, 3 = right only, 4 = left only"
seta cl_gibs_velocity_up 1 "extra z velocity for gibs"
seta cl_gibs_ticrate 0.1 "ticrate for gibs"
seta cl_gibs_sloppy 1 "sloppy gibs, may temporarily penetrate walls"
+seta cl_gibs_avelocity_scale 1 "how much angular velocity to use on gibs"
seta cl_casings 1 "enable or disable bullet casings"
seta cl_casings_shell_time 30 "shell casing lifetime"
seta cl_casings_bronze_time 10 "bullet casings lifetime"
cl_sound_r_exp3 ""
sv_sound_land ""
sv_sound_watersplash ""
-seta cl_sound_maptime_warning "1" "play announcer sound telling you the remaining maptime - 0: do not play at all, 1: play at one minute, 2: play at five minutes, 3: play both"
-seta cl_notify_carried_items "3" "notify you of carried items when you obtain them (e.g. flags in CTF) - 0: disabled, 1: notify of taken items, 2: notify of picking up dropped items, 3: notify of both"
seta cl_announcer default "name of the announcer you wish to use from data/sound/announcer"
+seta cl_announcer_antispam 2 "number of seconds before an announcement of the same sound can be played again"
+seta cl_announcer_maptime 3 "play announcer sound telling you the remaining maptime - 0: do not play at all, 1: play at one minute, 2: play at five minutes, 3: play both"
+seta cl_notify_carried_items "3" "notify you of carried items when you obtain them (e.g. flags in CTF) - 0: disabled, 1: notify of taken items, 2: notify of picking up dropped items, 3: notify of both"
// startmap_dm is used when running with the -listen or -dedicated commandline options
set serverconfig server.cfg
// key for that?
seta cl_hidewaypoints 0 "disable static waypoints, only show team waypoints"
+seta g_waypointsprites_turrets 1 "disable turret waypoints"
+seta g_waypointsprites_turrets_maxdist 4000 "max distace for turret sprites"
+
// command extension
alias qc_cmd "sv_cmd $*" // menu QC will override this to menu_cmd
alias adminmsg "sv_cmd adminmsg $*"
con_notifysize 10
con_notifyalign 0
-// hud variables
-set _hud_configure 0 "1 = configure the HUD"
-seta hud_configure_teamcolorforced 0 "1 = force display of team colors in configure mode"
-seta hud_configure_checkcollisions 1 "check for collisions against other panels when in hud configure mode"
-seta hud_configure_bg_minalpha 0.25 "minimum panel background alpha when in hud configure mode"
-seta hud_configure_grid_alpha 0.15 "alpha for visible grid when in configure mode"
-
seta sbar_info_pos 0 "Y-axis distance from lower right corner for engine info prints"
-// user preference cvars (i.e. shouldn't be adjusted by a skin config)
-seta hud_panel_weapons_label 1 "1 = show number of weapon, 2 = show bound key of weapon"
-seta hud_panel_weapons_complainbubble_time 1 "time that a new entry stays until it fades out"
-seta hud_panel_weapons_complainbubble_fadetime 0.25 "fade out time"
-seta hud_panel_weapons_accuracy 1 "show accuracy color as the weapon icon background; colors can be configured with accuracy_color* cvars"
-seta hud_panel_weapons_ammo 1 "show ammo as a status bar"
-seta hud_panel_weapons_ammo_full_shells 50 "show 100% of the status bar at this ammo count"
-seta hud_panel_weapons_ammo_full_nails 200 "show 100% of the status bar at this ammo count"
-seta hud_panel_weapons_ammo_full_cells 80 "show 100% of the status bar at this ammo count"
-seta hud_panel_weapons_ammo_full_rockets 80 "show 100% of the status bar at this ammo count"
-seta hud_panel_weapons_ammo_full_fuel 100 "show 100% of the status bar at this ammo count"
-seta hud_panel_weapons_onlyowned 1 "show only owned weapons"
-
-seta hud_panel_ammo_maxammo "40" "when you have this much ammo, the ammo status bar is full"
-
-seta hud_panel_healtharmor_maxhealth "200" "when you have this much health, the health status bar is full"
-seta hud_panel_healtharmor_maxarmor "200" "when you have this much armor, the armor status bar is full"
-seta hud_panel_healtharmor_progressbar_gfx 1 "enable graphic effects on the progressbars"
-seta hud_panel_healtharmor_progressbar_gfx_damage 5 "show damage effect when damaged at least by this amount; 0 disables the effect"
-seta hud_panel_healtharmor_progressbar_gfx_lowhealth 40 "health progressbar blinks when health is lower than this amount"
-seta hud_panel_healtharmor_progressbar_gfx_smooth 2 "smooth changes of the progressbar when health/armor change at least by this amount; 0 disables the effect"
-
-seta hud_panel_notify_time 10 "time that a new entry stays until it fades out"
-seta hud_panel_notify_fadetime 3 "fade out time"
-
-seta hud_panel_modicons_dom_layout 1 "3 possible layouts: 0) only icons; 1) icons and percentage of average pps (points per second); 2) icons and average pps"
-
-seta hud_panel_timer_increment 0 "show elapsed time instead of remaining time"
-
-seta hud_panel_radar_scale 4096 "distance you can see on the team radar"
-seta hud_panel_radar_rotation 0 "rotation mode: you set what points up. 0 = player, 1 = west, 2 = south, 3 = east, 4 = north"
-seta hud_panel_radar_zoommode 0 "zoom mode: 0 = zoomed by default, 1 = zoomed when +zoom, 2 = always zoomed, 3 = always zoomed out"
-alias hud_panel_radar_rotate "toggle hud_panel_radar_rotation 0 1 2 3 4"
-seta hud_panel_radar_maximized_scale 8192 "distance you can see on the radar when maximized"
-seta hud_panel_radar_maximized_size "0.5 0.5" "size of the radar when maximized"
-alias +hud_panel_radar_maximized "cl_cmd hud_panel_radar_maximized 1"
-alias -hud_panel_radar_maximized "cl_cmd hud_panel_radar_maximized 0"
-alias hud_panel_radar_maximized "cl_cmd hud_panel_radar_maximized"
-
-seta hud_panel_score_rankings 0 "show rankings: 1 always show my own score; 2 pure rankings"
-
-seta hud_panel_engineinfo_framecounter_time 0.1 "time between framerate display updates"
-seta hud_panel_engineinfo_framecounter_decimals 0 "amount of decimals to show"
-seta hud_panel_engineinfo_framecounter_exponentialmovingaverage 1 "use an averaging method for calculating fps instead of counting frametime like engine does"
-seta hud_panel_engineinfo_framecounter_exponentialmovingaverage_new_weight 0.1 "weight of latest data point"
-seta hud_panel_engineinfo_framecounter_exponentialmovingaverage_instantupdate_change_threshold 0.5 "threshold for fps change when to update instantly, to make big fps changes update faster"
-
-seta hud_panel_physics_speed_unit 3 "speed unit (1 = qu/s, 2 = m/s, 3 = km/h, 4 = mph, 5 = knots)"
-seta hud_panel_physics_speed_unit_show 1 "also show speed unit"
-seta hud_panel_physics_speed_max 1800 "speed progressbar gets filled up completely by this value (in qu/s)"
-seta hud_panel_physics_speed_vertical 0 "include the speed on the Z-axis"
-seta hud_panel_physics_topspeed 1 "also show top speed"
-seta hud_panel_physics_topspeed_time 4 "how many seconds the top speed takes to fade out"
-seta hud_panel_physics_acceleration_max 1.5 "acceleration progressbar gets completely filled up by this value (in g)"
-seta hud_panel_physics_acceleration_vertical 0 "include the acceleration on the Z-axis"
-
-seta hud_showbinds 1 "what to show in the HUD to indicate certain keys to press: 0 display commands, 1 bound keys, 2 both"
-seta hud_showbinds_limit 2 "maximum number of bound keys to show for a command. 0 for unlimited"
-
-seta hud_colorflash_alpha 0.5 "starting alpha of the color flash"
-
-seta hud_damage 0.55 "an improved version of gl_polyblend for damage, draw an image instead when hurt"
-seta hud_damage_blur 10 "Use postprocessing to blur the screen when you have taken damage. This can be paired with current hud damage or just used alone. Higher values = more blur"
-seta hud_damage_blur_alpha 0.5 "Amount of alpha to use when merging the blurred layers back into the render. Turning this up higher will remove bloom, so it's best to find a balance"
-seta hud_damage_gentle_alpha_multiplier 0.10 "how much to multiply alpha of flash when using the cl_gentle version, it's much more opaque than the non-gentle version"
-seta hud_damage_gentle_color "1 0.7 1" "color of flash for cl_gentle version"
-seta hud_damage_color "1 0 0" "color of flash"
-seta hud_damage_factor 0.025 "(damage * factor) = how much to add to the alpha value"
-seta hud_damage_fade_rate 0.75 "how much to subtract from the alpha value each second"
-seta hud_damage_maxalpha 1.5 "how much to limit the alpha value to"
-seta hud_damage_pain_threshold 0.1 "how much alpha to ignore (must be bigger than the hud_damage_factor so that e.g. rot is ignored)"
-seta hud_damage_pain_threshold_lower 1.25 "how much we lower pain_threshold with when nearing 0 health (if pain_threshold gets negative then we always draw a flash at alpha = fabs(pain_threshold)"
-seta hud_damage_pain_threshold_lower_health 50 "at which health we start lowering pain_threshold"
-seta hud_damage_pain_threshold_pulsating_min 0.6 "minimum value when calculating the pulse: max(pulsating_min, fabs(sin(PI * time / period))"
-seta hud_damage_pain_threshold_pulsating_period 0.8 "one pulse every X seconds"
-
-seta hud_powerup 0 "power of the sharpen effect when owning the shield or strength powerups, default is 0.5"
-
-seta hud_postprocessing 1 "enables the ability for effects such as hud_damage_blur and hud_contents to apply a postprocessing method upon the screen - enabling this disables manual editing of the postprocess cvars"
-seta hud_postprocessing_maxbluralpha 0 "maximum alpha which the blur postprocess can be, default is 0.5"
-seta hud_postprocessing_maxblurradius 8 "maximum radius which the blur postprocess can be, default is 8"
-
-seta hud_contents 1 "an improved version of gl_polyblend for liquids such as water/lava/slime, draw a filler when inside the liquid"
-seta hud_contents_blur 10 "Use postprocessing to blur the screen when you are inside a liquid. Higher values = more blur"
-seta hud_contents_blur_alpha 0.5 "Amount of alpha to use when merging the blurred layers back into the render. Turning this up higher will remove bloom, so it's best to find a balance"
-seta hud_contents_factor 1 "factor at which to multiply the current faded value."
-seta hud_contents_fadeintime 0.02 "factor of time it takes for the alpha level to reach normal value when entering the liquid"
-seta hud_contents_fadeouttime 0.1 "factor of time it takes for the alpha level to reach normal value when leaving the liquid"
-seta hud_contents_lava_alpha 0.7 "alpha of the lava color blend when inside it"
-seta hud_contents_lava_color "0.8 0.1 0"
-seta hud_contents_slime_alpha 0.7 "alpha of the slime color blend when inside it"
-seta hud_contents_slime_color "0 0.4 0.1"
-seta hud_contents_water_alpha 0.5 "alpha of the water color blend when inside it"
-seta hud_contents_water_color "0.4 0.3 0.3"
-
-seta hud_shownames 1 "draw names and health/armor of nearby players"
-seta hud_shownames_enemies 2 "1 = draw names of enemies you point at (TODO), 2 = draw names of all enemies in view"
-seta hud_shownames_self 0 "also include your own name to be shown when third person camera mode is on (chase_active/cl_eventchase)"
-seta hud_shownames_status 1 "1 = draw health/armor status of teammates"
-seta hud_shownames_statusbar_height 4 "height of status bar"
-seta hud_shownames_aspect 8 "aspect ratio of total drawing area per name"
-seta hud_shownames_fontsize 12 "font size"
-seta hud_shownames_decolorize 1 "1 = decolorize name in team games, 2 = decolorize always"
-seta hud_shownames_alpha 0.7 "alpha"
-seta hud_shownames_resize 1 "enable resizing of the names, then the size cvars will correspond to the maximum size"
-seta hud_shownames_mindistance 1000 "start fading alpha/size at this distance"
-seta hud_shownames_maxdistance 2500 "alpha/size is 0 at this distance"
-seta hud_shownames_antioverlap 1 "if two tags get too close to each other, fade out the one further away from you"
-seta hud_shownames_antioverlap_distance 125 "2d distance to other tag after which to fade out"
-seta hud_shownames_offset 52 "offset (along z-axis) tag from player origin by this many units"
-
// scoreboard
seta scoreboard_columns default
seta scoreboard_border_thickness 1 "scoreboard border thickness"
seta scoreboard_highlight 1 "enable highlighting for rows and columns in the scoreboard"
seta scoreboard_highlight_alpha 0.10 "highlight alpha value (depends on hud_scoreboard_highlight 1)"
seta scoreboard_highlight_alpha_self 0.25 "self highlight alpha value"
-seta scoreboard_offset_left 0.15 "how many pixels the scoreboard is offset from the left screen edge"
-seta scoreboard_offset_right 0.15 "how many pixels the scoreboard is offset from the right screen edge"
+seta scoreboard_offset_left 0.15 "how far (by percent) the scoreboard is offset from the left screen edge"
+seta scoreboard_offset_right 0.15 "how far (by percent) the scoreboard is offset from the right screen edge"
+seta scoreboard_offset_vertical 0.05 "how far (by percent) the scoreboard is offset from the top and bottom of the screen"
seta scoreboard_bg_scale 0.25 "scale for the tiled scoreboard background"
seta accuracy_color_levels "0 20 100" "accuracy values at which a specified color (accuracy_color<X>) will be used. If your accuracy is between 2 of these values then a mix of the Xth and X+1th colors will be used. You can specify up to 10 values, in increasing order"
// CTF capture limit placeholder cvar
set capturelimit 0
-// hud: font size
-seta hud_fontsize 11
-seta hud_width 560
-
// these entities are not referenced by anything directly, they just represent
// teams and are found by find() when needed
prvm_leaktest_ignore_classnames "ctf_team dom_team tdm_team"
if_client set g_start_delay 0 "delay before the game starts, so everyone can join; recommended to set this to like 15 on a public server"
if_dedicated set g_start_delay 15 "delay before the game starts, so everyone can join; recommended to set this to like 15 on a public server"
-alias ons_map "cl_cmd radar" // legacy alias
-alias radar "cl_cmd radar"
+alias radar "cl_cmd hud_panel_radar_maximized"
alias scoreboard_columns_set "" // aliased later
alias scoreboard_columns_help "cl_cmd scoreboard_columns_help $*"
// debug
set _independent_players 0 "DO NOT TOUCH"
+set _notarget 0 "NO, REALLY, DON'T"
// define some engine cvars that we need even on dedicated server
set r_showbboxes 0
set g_playerstats_uri ""
set g_playerstats_debug 0 "when 1, player stats are dumped to the console too"
+// session locking
+locksession 1
+
// create this cvar in case the engine did not
set snd_soundradius 1200
set snd_softclip 1
scr_loadingscreen_scale_base 1
scr_loadingscreen_scale_limit 2
-// sRGB configuration (EXPERIMENTAL, needs maps to be relit)
-alias sRGBcorrect_on "r_texture_sRGB_skin_diffuse 1;r_texture_sRGB_skin_gloss 1;r_texture_sRGB_skin_glow 1;r_texture_sRGB_reflect 1;r_texture_sRGB_skybox 1;v_gamma 2.2;r_restart"
-alias sRGBcorrect_off "r_texture_sRGB_skin_diffuse 0;r_texture_sRGB_skin_gloss 0;r_texture_sRGB_skin_glow 0;r_texture_sRGB_reflect 0;r_texture_sRGB_skybox 0;v_gamma 1.0;r_restart"
-
// other config files
exec balanceXonotic.cfg
exec ctfscoring-ai.cfg
exec turrets.cfg
exec vehicles.cfg
-// hud cvar descriptions
+// hud cvar descriptions and common settings
+exec _hud_common.cfg
exec _hud_descriptions.cfg
// exec the default skin config
-// please add any new cvars into the hud_save script in qcsrc/client/hud.qc for consistency
+// please add any new cvars into the hud_save script in qcsrc/client/hud_config.qc for consistency
exec hud_luminos.cfg
// enable menu syncing
projects / xonotic / xonotic-data.pk3dir.git / blobdiff