X-Git-Url: http://de.git.xonotic.org/?p=xonotic%2Fxonotic.git;a=blobdiff_plain;f=misc%2Fbuildfiles%2Fosx%2FXonotic.app%2FContents%2FFrameworks%2FSDL2.framework%2FVersions%2FA%2FHeaders%2FSDL_audio.h;fp=misc%2Fbuildfiles%2Fosx%2FXonotic.app%2FContents%2FFrameworks%2FSDL2.framework%2FVersions%2FA%2FHeaders%2FSDL_audio.h;h=4c987d5110435893f216280503306d4288af2c8f;hp=0000000000000000000000000000000000000000;hb=8764700ddad76c495a6eacfc80438d277fbf4273;hpb=bade3e94e5620d42d328962b80d5c7d72ddfccfe diff --git a/misc/buildfiles/osx/Xonotic.app/Contents/Frameworks/SDL2.framework/Versions/A/Headers/SDL_audio.h b/misc/buildfiles/osx/Xonotic.app/Contents/Frameworks/SDL2.framework/Versions/A/Headers/SDL_audio.h new file mode 100644 index 00000000..4c987d51 --- /dev/null +++ b/misc/buildfiles/osx/Xonotic.app/Contents/Frameworks/SDL2.framework/Versions/A/Headers/SDL_audio.h @@ -0,0 +1,506 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2014 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_audio.h + * + * Access to the raw audio mixing buffer for the SDL library. + */ + +#ifndef _SDL_audio_h +#define _SDL_audio_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_endian.h" +#include "SDL_mutex.h" +#include "SDL_thread.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Audio format flags. + * + * These are what the 16 bits in SDL_AudioFormat currently mean... + * (Unspecified bits are always zero). + * + * \verbatim + ++-----------------------sample is signed if set + || + || ++-----------sample is bigendian if set + || || + || || ++---sample is float if set + || || || + || || || +---sample bit size---+ + || || || | | + 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 + \endverbatim + * + * There are macros in SDL 2.0 and later to query these bits. + */ +typedef Uint16 SDL_AudioFormat; + +/** + * \name Audio flags + */ +/* @{ */ + +#define SDL_AUDIO_MASK_BITSIZE (0xFF) +#define SDL_AUDIO_MASK_DATATYPE (1<<8) +#define SDL_AUDIO_MASK_ENDIAN (1<<12) +#define SDL_AUDIO_MASK_SIGNED (1<<15) +#define SDL_AUDIO_BITSIZE(x) (x & SDL_AUDIO_MASK_BITSIZE) +#define SDL_AUDIO_ISFLOAT(x) (x & SDL_AUDIO_MASK_DATATYPE) +#define SDL_AUDIO_ISBIGENDIAN(x) (x & SDL_AUDIO_MASK_ENDIAN) +#define SDL_AUDIO_ISSIGNED(x) (x & SDL_AUDIO_MASK_SIGNED) +#define SDL_AUDIO_ISINT(x) (!SDL_AUDIO_ISFLOAT(x)) +#define SDL_AUDIO_ISLITTLEENDIAN(x) (!SDL_AUDIO_ISBIGENDIAN(x)) +#define SDL_AUDIO_ISUNSIGNED(x) (!SDL_AUDIO_ISSIGNED(x)) + +/** + * \name Audio format flags + * + * Defaults to LSB byte order. + */ +/* @{ */ +#define AUDIO_U8 0x0008 /**< Unsigned 8-bit samples */ +#define AUDIO_S8 0x8008 /**< Signed 8-bit samples */ +#define AUDIO_U16LSB 0x0010 /**< Unsigned 16-bit samples */ +#define AUDIO_S16LSB 0x8010 /**< Signed 16-bit samples */ +#define AUDIO_U16MSB 0x1010 /**< As above, but big-endian byte order */ +#define AUDIO_S16MSB 0x9010 /**< As above, but big-endian byte order */ +#define AUDIO_U16 AUDIO_U16LSB +#define AUDIO_S16 AUDIO_S16LSB +/* @} */ + +/** + * \name int32 support + */ +/* @{ */ +#define AUDIO_S32LSB 0x8020 /**< 32-bit integer samples */ +#define AUDIO_S32MSB 0x9020 /**< As above, but big-endian byte order */ +#define AUDIO_S32 AUDIO_S32LSB +/* @} */ + +/** + * \name float32 support + */ +/* @{ */ +#define AUDIO_F32LSB 0x8120 /**< 32-bit floating point samples */ +#define AUDIO_F32MSB 0x9120 /**< As above, but big-endian byte order */ +#define AUDIO_F32 AUDIO_F32LSB +/* @} */ + +/** + * \name Native audio byte ordering + */ +/* @{ */ +#if SDL_BYTEORDER == SDL_LIL_ENDIAN +#define AUDIO_U16SYS AUDIO_U16LSB +#define AUDIO_S16SYS AUDIO_S16LSB +#define AUDIO_S32SYS AUDIO_S32LSB +#define AUDIO_F32SYS AUDIO_F32LSB +#else +#define AUDIO_U16SYS AUDIO_U16MSB +#define AUDIO_S16SYS AUDIO_S16MSB +#define AUDIO_S32SYS AUDIO_S32MSB +#define AUDIO_F32SYS AUDIO_F32MSB +#endif +/* @} */ + +/** + * \name Allow change flags + * + * Which audio format changes are allowed when opening a device. + */ +/* @{ */ +#define SDL_AUDIO_ALLOW_FREQUENCY_CHANGE 0x00000001 +#define SDL_AUDIO_ALLOW_FORMAT_CHANGE 0x00000002 +#define SDL_AUDIO_ALLOW_CHANNELS_CHANGE 0x00000004 +#define SDL_AUDIO_ALLOW_ANY_CHANGE (SDL_AUDIO_ALLOW_FREQUENCY_CHANGE|SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_CHANNELS_CHANGE) +/* @} */ + +/* @} *//* Audio flags */ + +/** + * This function is called when the audio device needs more data. + * + * \param userdata An application-specific parameter saved in + * the SDL_AudioSpec structure + * \param stream A pointer to the audio data buffer. + * \param len The length of that buffer in bytes. + * + * Once the callback returns, the buffer will no longer be valid. + * Stereo samples are stored in a LRLRLR ordering. + */ +typedef void (SDLCALL * SDL_AudioCallback) (void *userdata, Uint8 * stream, + int len); + +/** + * The calculated values in this structure are calculated by SDL_OpenAudio(). + */ +typedef struct SDL_AudioSpec +{ + int freq; /**< DSP frequency -- samples per second */ + SDL_AudioFormat format; /**< Audio data format */ + Uint8 channels; /**< Number of channels: 1 mono, 2 stereo */ + Uint8 silence; /**< Audio buffer silence value (calculated) */ + Uint16 samples; /**< Audio buffer size in samples (power of 2) */ + Uint16 padding; /**< Necessary for some compile environments */ + Uint32 size; /**< Audio buffer size in bytes (calculated) */ + SDL_AudioCallback callback; + void *userdata; +} SDL_AudioSpec; + + +struct SDL_AudioCVT; +typedef void (SDLCALL * SDL_AudioFilter) (struct SDL_AudioCVT * cvt, + SDL_AudioFormat format); + +/** + * A structure to hold a set of audio conversion filters and buffers. + */ +#ifdef __GNUC__ +/* This structure is 84 bytes on 32-bit architectures, make sure GCC doesn't + pad it out to 88 bytes to guarantee ABI compatibility between compilers. + vvv + The next time we rev the ABI, make sure to size the ints and add padding. +*/ +#define SDL_AUDIOCVT_PACKED __attribute__((packed)) +#else +#define SDL_AUDIOCVT_PACKED +#endif +/* */ +typedef struct SDL_AudioCVT +{ + int needed; /**< Set to 1 if conversion possible */ + SDL_AudioFormat src_format; /**< Source audio format */ + SDL_AudioFormat dst_format; /**< Target audio format */ + double rate_incr; /**< Rate conversion increment */ + Uint8 *buf; /**< Buffer to hold entire audio data */ + int len; /**< Length of original audio buffer */ + int len_cvt; /**< Length of converted audio buffer */ + int len_mult; /**< buffer must be len*len_mult big */ + double len_ratio; /**< Given len, final size is len*len_ratio */ + SDL_AudioFilter filters[10]; /**< Filter list */ + int filter_index; /**< Current audio conversion function */ +} SDL_AUDIOCVT_PACKED SDL_AudioCVT; + + +/* Function prototypes */ + +/** + * \name Driver discovery functions + * + * These functions return the list of built in audio drivers, in the + * order that they are normally initialized by default. + */ +/* @{ */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDrivers(void); +extern DECLSPEC const char *SDLCALL SDL_GetAudioDriver(int index); +/* @} */ + +/** + * \name Initialization and cleanup + * + * \internal These functions are used internally, and should not be used unless + * you have a specific need to specify the audio driver you want to + * use. You should normally use SDL_Init() or SDL_InitSubSystem(). + */ +/* @{ */ +extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name); +extern DECLSPEC void SDLCALL SDL_AudioQuit(void); +/* @} */ + +/** + * This function returns the name of the current audio driver, or NULL + * if no driver has been initialized. + */ +extern DECLSPEC const char *SDLCALL SDL_GetCurrentAudioDriver(void); + +/** + * This function opens the audio device with the desired parameters, and + * returns 0 if successful, placing the actual hardware parameters in the + * structure pointed to by \c obtained. If \c obtained is NULL, the audio + * data passed to the callback function will be guaranteed to be in the + * requested format, and will be automatically converted to the hardware + * audio format if necessary. This function returns -1 if it failed + * to open the audio device, or couldn't set up the audio thread. + * + * When filling in the desired audio spec structure, + * - \c desired->freq should be the desired audio frequency in samples-per- + * second. + * - \c desired->format should be the desired audio format. + * - \c desired->samples is the desired size of the audio buffer, in + * samples. This number should be a power of two, and may be adjusted by + * the audio driver to a value more suitable for the hardware. Good values + * seem to range between 512 and 8096 inclusive, depending on the + * application and CPU speed. Smaller values yield faster response time, + * but can lead to underflow if the application is doing heavy processing + * and cannot fill the audio buffer in time. A stereo sample consists of + * both right and left channels in LR ordering. + * Note that the number of samples is directly related to time by the + * following formula: \code ms = (samples*1000)/freq \endcode + * - \c desired->size is the size in bytes of the audio buffer, and is + * calculated by SDL_OpenAudio(). + * - \c desired->silence is the value used to set the buffer to silence, + * and is calculated by SDL_OpenAudio(). + * - \c desired->callback should be set to a function that will be called + * when the audio device is ready for more data. It is passed a pointer + * to the audio buffer, and the length in bytes of the audio buffer. + * This function usually runs in a separate thread, and so you should + * protect data structures that it accesses by calling SDL_LockAudio() + * and SDL_UnlockAudio() in your code. + * - \c desired->userdata is passed as the first parameter to your callback + * function. + * + * The audio device starts out playing silence when it's opened, and should + * be enabled for playing by calling \c SDL_PauseAudio(0) when you are ready + * for your audio callback function to be called. Since the audio driver + * may modify the requested size of the audio buffer, you should allocate + * any local mixing buffers after you open the audio device. + */ +extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec * desired, + SDL_AudioSpec * obtained); + +/** + * SDL Audio Device IDs. + * + * A successful call to SDL_OpenAudio() is always device id 1, and legacy + * SDL audio APIs assume you want this device ID. SDL_OpenAudioDevice() calls + * always returns devices >= 2 on success. The legacy calls are good both + * for backwards compatibility and when you don't care about multiple, + * specific, or capture devices. + */ +typedef Uint32 SDL_AudioDeviceID; + +/** + * Get the number of available devices exposed by the current driver. + * Only valid after a successfully initializing the audio subsystem. + * Returns -1 if an explicit list of devices can't be determined; this is + * not an error. For example, if SDL is set up to talk to a remote audio + * server, it can't list every one available on the Internet, but it will + * still allow a specific host to be specified to SDL_OpenAudioDevice(). + * + * In many common cases, when this function returns a value <= 0, it can still + * successfully open the default device (NULL for first argument of + * SDL_OpenAudioDevice()). + */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDevices(int iscapture); + +/** + * Get the human-readable name of a specific audio device. + * Must be a value between 0 and (number of audio devices-1). + * Only valid after a successfully initializing the audio subsystem. + * The values returned by this function reflect the latest call to + * SDL_GetNumAudioDevices(); recall that function to redetect available + * hardware. + * + * The string returned by this function is UTF-8 encoded, read-only, and + * managed internally. You are not to free it. If you need to keep the + * string for any length of time, you should make your own copy of it, as it + * will be invalid next time any of several other SDL functions is called. + */ +extern DECLSPEC const char *SDLCALL SDL_GetAudioDeviceName(int index, + int iscapture); + + +/** + * Open a specific audio device. Passing in a device name of NULL requests + * the most reasonable default (and is equivalent to calling SDL_OpenAudio()). + * + * The device name is a UTF-8 string reported by SDL_GetAudioDeviceName(), but + * some drivers allow arbitrary and driver-specific strings, such as a + * hostname/IP address for a remote audio server, or a filename in the + * diskaudio driver. + * + * \return 0 on error, a valid device ID that is >= 2 on success. + * + * SDL_OpenAudio(), unlike this function, always acts on device ID 1. + */ +extern DECLSPEC SDL_AudioDeviceID SDLCALL SDL_OpenAudioDevice(const char + *device, + int iscapture, + const + SDL_AudioSpec * + desired, + SDL_AudioSpec * + obtained, + int + allowed_changes); + + + +/** + * \name Audio state + * + * Get the current audio state. + */ +/* @{ */ +typedef enum +{ + SDL_AUDIO_STOPPED = 0, + SDL_AUDIO_PLAYING, + SDL_AUDIO_PAUSED +} SDL_AudioStatus; +extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioStatus(void); + +extern DECLSPEC SDL_AudioStatus SDLCALL +SDL_GetAudioDeviceStatus(SDL_AudioDeviceID dev); +/* @} *//* Audio State */ + +/** + * \name Pause audio functions + * + * These functions pause and unpause the audio callback processing. + * They should be called with a parameter of 0 after opening the audio + * device to start playing sound. This is so you can safely initialize + * data for your callback function after opening the audio device. + * Silence will be written to the audio device during the pause. + */ +/* @{ */ +extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on); +extern DECLSPEC void SDLCALL SDL_PauseAudioDevice(SDL_AudioDeviceID dev, + int pause_on); +/* @} *//* Pause audio functions */ + +/** + * This function loads a WAVE from the data source, automatically freeing + * that source if \c freesrc is non-zero. For example, to load a WAVE file, + * you could do: + * \code + * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...); + * \endcode + * + * If this function succeeds, it returns the given SDL_AudioSpec, + * filled with the audio data format of the wave data, and sets + * \c *audio_buf to a malloc()'d buffer containing the audio data, + * and sets \c *audio_len to the length of that audio buffer, in bytes. + * You need to free the audio buffer with SDL_FreeWAV() when you are + * done with it. + * + * This function returns NULL and sets the SDL error message if the + * wave file cannot be opened, uses an unknown data format, or is + * corrupt. Currently raw and MS-ADPCM WAVE files are supported. + */ +extern DECLSPEC SDL_AudioSpec *SDLCALL SDL_LoadWAV_RW(SDL_RWops * src, + int freesrc, + SDL_AudioSpec * spec, + Uint8 ** audio_buf, + Uint32 * audio_len); + +/** + * Loads a WAV from a file. + * Compatibility convenience function. + */ +#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \ + SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len) + +/** + * This function frees data previously allocated with SDL_LoadWAV_RW() + */ +extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 * audio_buf); + +/** + * This function takes a source format and rate and a destination format + * and rate, and initializes the \c cvt structure with information needed + * by SDL_ConvertAudio() to convert a buffer of audio data from one format + * to the other. + * + * \return -1 if the format conversion is not supported, 0 if there's + * no conversion needed, or 1 if the audio filter is set up. + */ +extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT * cvt, + SDL_AudioFormat src_format, + Uint8 src_channels, + int src_rate, + SDL_AudioFormat dst_format, + Uint8 dst_channels, + int dst_rate); + +/** + * Once you have initialized the \c cvt structure using SDL_BuildAudioCVT(), + * created an audio buffer \c cvt->buf, and filled it with \c cvt->len bytes of + * audio data in the source format, this function will convert it in-place + * to the desired format. + * + * The data conversion may expand the size of the audio data, so the buffer + * \c cvt->buf should be allocated after the \c cvt structure is initialized by + * SDL_BuildAudioCVT(), and should be \c cvt->len*cvt->len_mult bytes long. + */ +extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT * cvt); + +#define SDL_MIX_MAXVOLUME 128 +/** + * This takes two audio buffers of the playing audio format and mixes + * them, performing addition, volume adjustment, and overflow clipping. + * The volume ranges from 0 - 128, and should be set to ::SDL_MIX_MAXVOLUME + * for full audio volume. Note this does not change hardware volume. + * This is provided for convenience -- you can mix your own audio data. + */ +extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 * dst, const Uint8 * src, + Uint32 len, int volume); + +/** + * This works like SDL_MixAudio(), but you specify the audio format instead of + * using the format of audio device 1. Thus it can be used when no audio + * device is open at all. + */ +extern DECLSPEC void SDLCALL SDL_MixAudioFormat(Uint8 * dst, + const Uint8 * src, + SDL_AudioFormat format, + Uint32 len, int volume); + +/** + * \name Audio lock functions + * + * The lock manipulated by these functions protects the callback function. + * During a SDL_LockAudio()/SDL_UnlockAudio() pair, you can be guaranteed that + * the callback function is not running. Do not call these from the callback + * function or you will cause deadlock. + */ +/* @{ */ +extern DECLSPEC void SDLCALL SDL_LockAudio(void); +extern DECLSPEC void SDLCALL SDL_LockAudioDevice(SDL_AudioDeviceID dev); +extern DECLSPEC void SDLCALL SDL_UnlockAudio(void); +extern DECLSPEC void SDLCALL SDL_UnlockAudioDevice(SDL_AudioDeviceID dev); +/* @} *//* Audio lock functions */ + +/** + * This function shuts down audio processing and closes the audio device. + */ +extern DECLSPEC void SDLCALL SDL_CloseAudio(void); +extern DECLSPEC void SDLCALL SDL_CloseAudioDevice(SDL_AudioDeviceID dev); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_audio_h */ + +/* vi: set ts=4 sw=4 expandtab: */