// how many frames have occurred
// (checked by Host_Error and Host_SaveConfig_f)
int host_framecount = 0;
+
+// Cloudwalk: set when Host_Init is executed
+qboolean host_init = false;
// LadyHavoc: set when quit is executed
qboolean host_shuttingdown = false;
jmp_buf host_abortframe;
// pretend frames take this amount of time (in seconds), 0 = realtime
-cvar_t host_framerate = {0, "host_framerate","0", "locks frame timing to this value in seconds, 0.05 is 20fps for example, note that this can easily run too fast, use cl_maxfps if you want to limit your framerate instead, or sys_ticrate to limit server speed"};
-cvar_t cl_maxphysicsframesperserverframe = {0, "cl_maxphysicsframesperserverframe","10", "maximum number of physics frames per server frame"};
+cvar_t host_framerate = {CVAR_CLIENT | CVAR_SERVER, "host_framerate","0", "locks frame timing to this value in seconds, 0.05 is 20fps for example, note that this can easily run too fast, use cl_maxfps if you want to limit your framerate instead, or sys_ticrate to limit server speed"};
+cvar_t cl_maxphysicsframesperserverframe = {CVAR_CLIENT, "cl_maxphysicsframesperserverframe","10", "maximum number of physics frames per server frame"};
// shows time used by certain subsystems
-cvar_t host_speeds = {0, "host_speeds","0", "reports how much time is used in server/graphics/sound"};
-cvar_t host_maxwait = {0, "host_maxwait","1000", "maximum sleep time requested from the operating system in millisecond. Larger sleeps will be done using multiple host_maxwait length sleeps. Lowering this value will increase CPU load, but may help working around problems with accuracy of sleep times."};
-cvar_t cl_minfps = {CVAR_SAVE, "cl_minfps", "40", "minimum fps target - while the rendering performance is below this, it will drift toward lower quality"};
-cvar_t cl_minfps_fade = {CVAR_SAVE, "cl_minfps_fade", "1", "how fast the quality adapts to varying framerate"};
-cvar_t cl_minfps_qualitymax = {CVAR_SAVE, "cl_minfps_qualitymax", "1", "highest allowed drawdistance multiplier"};
-cvar_t cl_minfps_qualitymin = {CVAR_SAVE, "cl_minfps_qualitymin", "0.25", "lowest allowed drawdistance multiplier"};
-cvar_t cl_minfps_qualitymultiply = {CVAR_SAVE, "cl_minfps_qualitymultiply", "0.2", "multiplier for quality changes in quality change per second render time (1 assumes linearity of quality and render time)"};
-cvar_t cl_minfps_qualityhysteresis = {CVAR_SAVE, "cl_minfps_qualityhysteresis", "0.05", "reduce all quality increments by this to reduce flickering"};
-cvar_t cl_minfps_qualitystepmax = {CVAR_SAVE, "cl_minfps_qualitystepmax", "0.1", "maximum quality change in a single frame"};
-cvar_t cl_minfps_force = {0, "cl_minfps_force", "0", "also apply quality reductions in timedemo/capturevideo"};
-cvar_t cl_maxfps = {CVAR_SAVE, "cl_maxfps", "0", "maximum fps cap, 0 = unlimited, if game is running faster than this it will wait before running another frame (useful to make cpu time available to other programs)"};
-cvar_t cl_maxfps_alwayssleep = {0, "cl_maxfps_alwayssleep","1", "gives up some processing time to other applications each frame, value in milliseconds, disabled if cl_maxfps is 0"};
-cvar_t cl_maxidlefps = {CVAR_SAVE, "cl_maxidlefps", "20", "maximum fps cap when the game is not the active window (makes cpu time available to other programs"};
-
-cvar_t developer = {CVAR_SAVE, "developer","0", "shows debugging messages and information (recommended for all developers and level designers); the value -1 also suppresses buffering and logging these messages"};
-cvar_t developer_extra = {0, "developer_extra", "0", "prints additional debugging messages, often very verbose!"};
-cvar_t developer_insane = {0, "developer_insane", "0", "prints huge streams of information about internal workings, entire contents of files being read/written, etc. Not recommended!"};
-cvar_t developer_loadfile = {0, "developer_loadfile","0", "prints name and size of every file loaded via the FS_LoadFile function (which is almost everything)"};
-cvar_t developer_loading = {0, "developer_loading","0", "prints information about files as they are loaded or unloaded successfully"};
-cvar_t developer_entityparsing = {0, "developer_entityparsing", "0", "prints detailed network entities information each time a packet is received"};
-
-cvar_t timestamps = {CVAR_SAVE, "timestamps", "0", "prints timestamps on console messages"};
-cvar_t timeformat = {CVAR_SAVE, "timeformat", "[%Y-%m-%d %H:%M:%S] ", "time format to use on timestamped console messages"};
-
-cvar_t sessionid = {CVAR_READONLY, "sessionid", "", "ID of the current session (use the -sessionid parameter to set it); this is always either empty or begins with a dot (.)"};
-cvar_t locksession = {0, "locksession", "0", "Lock the session? 0 = no, 1 = yes and abort on failure, 2 = yes and continue on failure"};
+cvar_t host_speeds = {CVAR_CLIENT | CVAR_SERVER, "host_speeds","0", "reports how much time is used in server/graphics/sound"};
+cvar_t host_maxwait = {CVAR_CLIENT | CVAR_SERVER, "host_maxwait","1000", "maximum sleep time requested from the operating system in millisecond. Larger sleeps will be done using multiple host_maxwait length sleeps. Lowering this value will increase CPU load, but may help working around problems with accuracy of sleep times."};
+cvar_t cl_minfps = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps", "40", "minimum fps target - while the rendering performance is below this, it will drift toward lower quality"};
+cvar_t cl_minfps_fade = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_fade", "1", "how fast the quality adapts to varying framerate"};
+cvar_t cl_minfps_qualitymax = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitymax", "1", "highest allowed drawdistance multiplier"};
+cvar_t cl_minfps_qualitymin = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitymin", "0.25", "lowest allowed drawdistance multiplier"};
+cvar_t cl_minfps_qualitymultiply = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitymultiply", "0.2", "multiplier for quality changes in quality change per second render time (1 assumes linearity of quality and render time)"};
+cvar_t cl_minfps_qualityhysteresis = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualityhysteresis", "0.05", "reduce all quality increments by this to reduce flickering"};
+cvar_t cl_minfps_qualitystepmax = {CVAR_CLIENT | CVAR_SAVE, "cl_minfps_qualitystepmax", "0.1", "maximum quality change in a single frame"};
+cvar_t cl_minfps_force = {CVAR_CLIENT, "cl_minfps_force", "0", "also apply quality reductions in timedemo/capturevideo"};
+cvar_t cl_maxfps = {CVAR_CLIENT | CVAR_SAVE, "cl_maxfps", "0", "maximum fps cap, 0 = unlimited, if game is running faster than this it will wait before running another frame (useful to make cpu time available to other programs)"};
+cvar_t cl_maxfps_alwayssleep = {CVAR_CLIENT, "cl_maxfps_alwayssleep","1", "gives up some processing time to other applications each frame, value in milliseconds, disabled if cl_maxfps is 0"};
+cvar_t cl_maxidlefps = {CVAR_CLIENT | CVAR_SAVE, "cl_maxidlefps", "20", "maximum fps cap when the game is not the active window (makes cpu time available to other programs"};
+
+cvar_t developer = {CVAR_CLIENT | CVAR_SERVER | CVAR_SAVE, "developer","0", "shows debugging messages and information (recommended for all developers and level designers); the value -1 also suppresses buffering and logging these messages"};
+cvar_t developer_extra = {CVAR_CLIENT | CVAR_SERVER, "developer_extra", "0", "prints additional debugging messages, often very verbose!"};
+cvar_t developer_insane = {CVAR_CLIENT | CVAR_SERVER, "developer_insane", "0", "prints huge streams of information about internal workings, entire contents of files being read/written, etc. Not recommended!"};
+cvar_t developer_loadfile = {CVAR_CLIENT | CVAR_SERVER, "developer_loadfile","0", "prints name and size of every file loaded via the FS_LoadFile function (which is almost everything)"};
+cvar_t developer_loading = {CVAR_CLIENT | CVAR_SERVER, "developer_loading","0", "prints information about files as they are loaded or unloaded successfully"};
+cvar_t developer_entityparsing = {CVAR_CLIENT, "developer_entityparsing", "0", "prints detailed network entities information each time a packet is received"};
+
+cvar_t timestamps = {CVAR_CLIENT | CVAR_SERVER | CVAR_SAVE, "timestamps", "0", "prints timestamps on console messages"};
+cvar_t timeformat = {CVAR_CLIENT | CVAR_SERVER | CVAR_SAVE, "timeformat", "[%Y-%m-%d %H:%M:%S] ", "time format to use on timestamped console messages"};
+
+cvar_t sessionid = {CVAR_CLIENT | CVAR_SERVER | CVAR_READONLY, "sessionid", "", "ID of the current session (use the -sessionid parameter to set it); this is always either empty or begins with a dot (.)"};
+cvar_t locksession = {CVAR_CLIENT | CVAR_SERVER, "locksession", "0", "Lock the session? 0 = no, 1 = yes and abort on failure, 2 = yes and continue on failure"};
/*
================
dpvsnprintf (hosterrorstring1,sizeof(hosterrorstring1),error,argptr);
va_end (argptr);
- Con_Printf("Host_Error: %s\n", hosterrorstring1);
+ Con_Errorf("Host_Error: %s\n", hosterrorstring1);
// LadyHavoc: if crashing very early, or currently shutting down, do
// Sys_Error instead
if (COM_CheckParm ("-listen"))
Con_Printf ("Only one of -dedicated or -listen can be specified\n");
// default sv_public on for dedicated servers (often hosted by serious administrators), off for listen servers (often hosted by clueless users)
- Cvar_SetValue("sv_public", 1);
+ Cvar_SetValue(&cvars_all, "sv_public", 1);
}
else if (cl_available)
{
f = FS_OpenRealFile(file, "wb", false);
if (!f)
{
- Con_Printf("Couldn't write %s.\n", file);
+ Con_Errorf("Couldn't write %s.\n", file);
return;
}
Key_WriteBindings (f);
- Cvar_WriteVariables (f);
+ Cvar_WriteVariables (&cvars_all, f);
FS_Close (f);
}
Cbuf_InsertText(cmd, "alias startmap_sp \"map start\"\nalias startmap_dm \"map start\"\nexec teu.rc\n");
else
Cbuf_InsertText(cmd, "alias startmap_sp \"map start\"\nalias startmap_dm \"map start\"\nexec " STARTCONFIGFILENAME "\n");
+ Cbuf_Execute(cmd);
}
/*
{
// warn if it's significant
if (deltacleantime < -0.01)
- Con_Printf("Host_Mingled: time stepped backwards (went from %f to %f, difference %f)\n", olddirtytime, dirtytime, deltacleantime);
+ Con_Warnf("Host_Mingled: time stepped backwards (went from %f to %f, difference %f)\n", olddirtytime, dirtytime, deltacleantime);
deltacleantime = 0;
}
else if (deltacleantime >= 1800)
{
- Con_Printf("Host_Mingled: time stepped forward (went from %f to %f, difference %f)\n", olddirtytime, dirtytime, deltacleantime);
+ Con_Warnf("Host_Mingled: time stepped forward (went from %f to %f, difference %f)\n", olddirtytime, dirtytime, deltacleantime);
deltacleantime = 0;
}
realtime += deltacleantime;
}
}
- if (slowmo.value < 0.00001 && slowmo.value != 0)
- Cvar_SetValue("slowmo", 0);
if (host_framerate.value < 0.00001 && host_framerate.value != 0)
- Cvar_SetValue("host_framerate", 0);
+ Cvar_SetValueQuick(&host_framerate, 0);
TaskQueue_Frame(false);
// process console commands
// R_TimeReport("preconsole");
CL_VM_PreventInformationLeaks();
+ Cbuf_Frame(&cmd_clientfromserver);
Cbuf_Frame(&cmd_client);
Cbuf_Frame(&cmd_server);
+
+ if(sv.active)
+ {
+ Cbuf_Frame(&cmd_serverfromclient);
+ }
+
// R_TimeReport("console");
}
R_TimeReport("client");
CL_UpdateScreen();
- CL_MeshEntities_Reset();
R_TimeReport("render");
if (host_speeds.integer)
static void Host_InitSession(void)
{
int i;
+ char *buf;
Cvar_RegisterVariable(&sessionid);
Cvar_RegisterVariable(&locksession);
// load the session ID into the read-only cvar
if ((i = COM_CheckParm("-sessionid")) && (i + 1 < com_argc))
{
- char vabuf[1024];
if(com_argv[i+1][0] == '.')
Cvar_SetQuick(&sessionid, com_argv[i+1]);
else
- Cvar_SetQuick(&sessionid, va(vabuf, sizeof(vabuf), ".%s", com_argv[i+1]));
+ {
+ buf = (char *)Z_Malloc(strlen(com_argv[i+1]) + 2);
+ dpsnprintf(buf, sizeof(buf), ".%s", com_argv[i+1]);
+ Cvar_SetQuick(&sessionid, buf);
+ }
}
}
void Host_LockSession(void)
{
if(locksession.integer == 2)
{
- Con_Printf("WARNING: session lock %s could not be acquired. Please run with -sessionid and an unique session name. Continuing anyway.\n", p);
+ Con_Warnf("WARNING: session lock %s could not be acquired. Please run with -sessionid and an unique session name. Continuing anyway.\n", p);
}
else
{
qboolean dedicated_server = COM_CheckParm("-dedicated") || !cl_available;
cmd_state_t *cmd = &cmd_client;
+ host_init = true;
+
if (COM_CheckParm("-profilegameonly"))
Sys_AllowProfiling(false);
Thread_Init();
TaskQueue_Init();
- if (cls.state == ca_dedicated)
- {
- cmd = &cmd_server;
- Cmd_AddCommand(&cmd_server, "disconnect", CL_Disconnect_f, "disconnect from server (or disconnect all clients if running a server)");
- }
- else
- {
- Con_DPrintf("Initializing client\n");
-
- R_Modules_Init();
- Palette_Init();
-#ifdef CONFIG_MENU
- MR_Init_Commands();
-#endif
- VID_Shared_Init();
- VID_Init();
- Render_Init();
- S_Init();
- CDAudio_Init();
- Key_Init();
- CL_Init();
- }
+ CL_Init();
// save off current state of aliases, commands and cvars for later restore if FS_GameDir_f is called
// NOTE: menu commands are freed by Cmd_RestoreInitState
}
Host_AddConfigText(cmd);
- Cbuf_Execute(cmd);
- // if stuffcmds wasn't run, then quake.rc is probably missing, use default
- if (!host_stuffcmdsrun)
+ Host_StartVideo();
+
+ // if quake.rc is missing, use default
+ if (!FS_FileExists("quake.rc"))
{
- Cbuf_AddText(cmd, "exec default.cfg\nexec " CONFIGFILENAME "\nexec autoexec.cfg\nstuffcmds\n");
+ Cbuf_AddText(cmd, "exec default.cfg\nexec " CONFIGFILENAME "\nexec autoexec.cfg\n");
Cbuf_Execute(cmd);
}
+ host_init = false;
+
+ // run stuffcmds now, deferred previously because it can crash if a server starts that early
+ Cbuf_AddText(cmd,"stuffcmds\n");
+ Cbuf_Execute(cmd);
+
+ Log_Start();
+
// put up the loading image so the user doesn't stare at a black screen...
SCR_BeginLoadingPlaque(true);