--- /dev/null
+/*
+Copyright (C) 1996-1997 Id Software, Inc.
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+as published by the Free Software Foundation; either version 2
+of the License, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+*/
+
+#ifndef MODEL_BRUSH_H
+#define MODEL_BRUSH_H
+
+/*
+==============================================================================
+
+BRUSH MODELS
+
+==============================================================================
+*/
+
+
+
+//
+// in memory representation
+//
+typedef struct mvertex_s
+{
+ vec3_t position;
+}
+mvertex_t;
+
+#define SIDE_FRONT 0
+#define SIDE_BACK 1
+#define SIDE_ON 2
+
+
+// plane_t structure
+typedef struct mplane_s
+{
+ vec3_t normal;
+ float dist;
+ // for texture axis selection and fast side tests
+ int type; // set by PlaneClassify()
+ int signbits; // set by PlaneClassify()
+}
+mplane_t;
+
+#define SHADERSTAGE_SKY 0
+#define SHADERSTAGE_NORMAL 1
+#define SHADERSTAGE_COUNT 2
+
+//#define SURF_PLANEBACK 2
+
+// indicates that all triangles of the surface should be added to the BIH collision system
+#define MATERIALFLAG_MESHCOLLISIONS 1
+// use alpha blend on this material
+#define MATERIALFLAG_ALPHA 2
+// use additive blend on this material
+#define MATERIALFLAG_ADD 4
+// turn off depth test on this material
+#define MATERIALFLAG_NODEPTHTEST 8
+// multiply alpha by r_wateralpha cvar
+#define MATERIALFLAG_WATERALPHA 16
+// draw with no lighting
+#define MATERIALFLAG_FULLBRIGHT 32
+// drawn as a normal surface (alternative to SKY)
+#define MATERIALFLAG_WALL 64
+// this surface shows the sky in its place, alternative to WALL
+// skipped if transparent
+#define MATERIALFLAG_SKY 128
+// swirling water effect (used with MATERIALFLAG_WALL)
+#define MATERIALFLAG_WATERSCROLL 256
+// skips drawing the surface
+#define MATERIALFLAG_NODRAW 512
+// probably used only on q1bsp water
+#define MATERIALFLAG_LIGHTBOTHSIDES 1024
+// use alpha test on this material
+#define MATERIALFLAG_ALPHATEST 2048
+// treat this material as a blended transparency (as opposed to an alpha test
+// transparency), this causes special fog behavior, and disables glDepthMask
+#define MATERIALFLAG_BLENDED 4096
+// render using a custom blendfunc
+#define MATERIALFLAG_CUSTOMBLEND 8192
+// do not cast shadows from this material
+#define MATERIALFLAG_NOSHADOW 16384
+// render using vertex alpha (q3bsp) as texture blend parameter between foreground (normal) skinframe and background skinframe
+#define MATERIALFLAG_VERTEXTEXTUREBLEND 32768
+// disables GL_CULL_FACE on this texture (making it double sided)
+#define MATERIALFLAG_NOCULLFACE 65536
+// render with a very short depth range (like 10% of normal), this causes entities to appear infront of most of the scene
+#define MATERIALFLAG_SHORTDEPTHRANGE 131072
+// render water, comprising refraction and reflection (note: this is always opaque, the shader does the alpha effect)
+#define MATERIALFLAG_WATERSHADER 262144
+// render refraction (note: this is just a way to distort the background, otherwise useless)
+#define MATERIALFLAG_REFRACTION 524288
+// render reflection
+#define MATERIALFLAG_REFLECTION 1048576
+// use model lighting on this material (q1bsp lightmap sampling or q3bsp lightgrid, implies FULLBRIGHT is false)
+#define MATERIALFLAG_MODELLIGHT 4194304
+// add directional model lighting to this material (q3bsp lightgrid only)
+#define MATERIALFLAG_MODELLIGHT_DIRECTIONAL 8388608
+// causes RSurf_GetCurrentTexture to leave alone certain fields
+#define MATERIALFLAG_CUSTOMSURFACE 16777216
+// causes MATERIALFLAG_BLENDED to render a depth pass before rendering, hiding backfaces and other hidden geometry
+#define MATERIALFLAG_TRANSDEPTH 33554432
+// like refraction, but doesn't distort etc.
+#define MATERIALFLAG_CAMERA 67108864
+// disable rtlight on surface, use R_LightPoint instead
+#define MATERIALFLAG_NORTLIGHT 134217728
+// combined mask of all attributes that require depth sorted rendering
+#define MATERIALFLAGMASK_DEPTHSORTED (MATERIALFLAG_BLENDED | MATERIALFLAG_NODEPTHTEST)
+// combined mask of all attributes that cause some sort of transparency
+#define MATERIALFLAGMASK_TRANSLUCENT (MATERIALFLAG_WATERALPHA | MATERIALFLAG_SKY | MATERIALFLAG_NODRAW | MATERIALFLAG_ALPHATEST | MATERIALFLAG_BLENDED | MATERIALFLAG_WATERSHADER | MATERIALFLAG_REFRACTION)
+
+typedef struct medge_s
+{
+ unsigned short v[2];
+}
+medge_t;
+
+struct entity_render_s;
+struct texture_s;
+struct msurface_s;
+
+typedef struct mnode_s
+{
+ //this part shared between node and leaf
+ mplane_t *plane; // != NULL
+ struct mnode_s *parent;
+ struct mportal_s *portals;
+ // for bounding box culling
+ vec3_t mins;
+ vec3_t maxs;
+ // supercontents from all brushes inside this node or leaf
+ int combinedsupercontents;
+
+ // this part unique to node
+ struct mnode_s *children[2];
+
+ // q1bsp specific
+ unsigned short firstsurface;
+ unsigned short numsurfaces;
+}
+mnode_t;
+
+typedef struct mleaf_s
+{
+ //this part shared between node and leaf
+ mplane_t *plane; // == NULL
+ struct mnode_s *parent;
+ struct mportal_s *portals;
+ // for bounding box culling
+ vec3_t mins;
+ vec3_t maxs;
+ // supercontents from all brushes inside this node or leaf
+ int combinedsupercontents;
+
+ // this part unique to leaf
+ // common
+ int clusterindex; // -1 is not in pvs, >= 0 is pvs bit number
+ int areaindex; // q3bsp
+ int containscollisionsurfaces; // indicates whether the leafsurfaces contains q3 patches
+ int numleafsurfaces;
+ int *firstleafsurface;
+ int numleafbrushes; // q3bsp
+ int *firstleafbrush; // q3bsp
+ unsigned char ambient_sound_level[NUM_AMBIENTS]; // q1bsp
+ int contents; // q1bsp: // TODO: remove (only used temporarily during loading when making collision hull 0)
+ int portalmarkid; // q1bsp // used by see-polygon-through-portals visibility checker
+}
+mleaf_t;
+
+typedef struct mclipnode_s
+{
+ int planenum;
+ int children[2]; // negative numbers are contents
+} mclipnode_t;
+
+typedef struct hull_s
+{
+ mclipnode_t *clipnodes;
+ mplane_t *planes;
+ int firstclipnode;
+ int lastclipnode;
+ vec3_t clip_mins;
+ vec3_t clip_maxs;
+ vec3_t clip_size;
+}
+hull_t;
+
+typedef struct mportal_s
+{
+ struct mportal_s *next; // the next portal on this leaf
+ mleaf_t *here; // the leaf this portal is on
+ mleaf_t *past; // the leaf through this portal (infront)
+ int numpoints;
+ mvertex_t *points;
+ vec3_t mins, maxs; // culling
+ mplane_t plane;
+}
+mportal_t;
+
+typedef struct svbspmesh_s
+{
+ struct svbspmesh_s *next;
+ int numverts, maxverts;
+ int numtriangles, maxtriangles;
+ float *verts;
+ int *elements;
+}
+svbspmesh_t;
+
+// Q2 bsp stuff
+
+#define Q2BSPVERSION 38
+
+// leaffaces, leafbrushes, planes, and verts are still bounded by
+// 16 bit short limits
+
+//=============================================================================
+
+#define Q2LUMP_ENTITIES 0
+#define Q2LUMP_PLANES 1
+#define Q2LUMP_VERTEXES 2
+#define Q2LUMP_VISIBILITY 3
+#define Q2LUMP_NODES 4
+#define Q2LUMP_TEXINFO 5
+#define Q2LUMP_FACES 6
+#define Q2LUMP_LIGHTING 7
+#define Q2LUMP_LEAFS 8
+#define Q2LUMP_LEAFFACES 9
+#define Q2LUMP_LEAFBRUSHES 10
+#define Q2LUMP_EDGES 11
+#define Q2LUMP_SURFEDGES 12
+#define Q2LUMP_MODELS 13
+#define Q2LUMP_BRUSHES 14
+#define Q2LUMP_BRUSHSIDES 15
+#define Q2LUMP_POP 16
+#define Q2LUMP_AREAS 17
+#define Q2LUMP_AREAPORTALS 18
+#define Q2HEADER_LUMPS 19
+
+typedef struct q2dheader_s
+{
+ int ident;
+ int version;
+ lump_t lumps[Q2HEADER_LUMPS];
+} q2dheader_t;
+
+typedef struct q2dmodel_s
+{
+ float mins[3], maxs[3];
+ float origin[3]; // for sounds or lights
+ int headnode;
+ int firstface, numfaces; // submodels just draw faces
+ // without walking the bsp tree
+} q2dmodel_t;
+
+// planes (x&~1) and (x&~1)+1 are always opposites
+
+// contents flags are seperate bits
+// a given brush can contribute multiple content bits
+// multiple brushes can be in a single leaf
+
+// these definitions also need to be in q_shared.h!
+
+// lower bits are stronger, and will eat weaker brushes completely
+#define Q2CONTENTS_SOLID 1 // an eye is never valid in a solid
+#define Q2CONTENTS_WINDOW 2 // translucent, but not watery
+#define Q2CONTENTS_AUX 4
+#define Q2CONTENTS_LAVA 8
+#define Q2CONTENTS_SLIME 16
+#define Q2CONTENTS_WATER 32
+#define Q2CONTENTS_MIST 64
+#define Q2LAST_VISIBLE_CONTENTS 64
+
+// remaining contents are non-visible, and don't eat brushes
+
+#define Q2CONTENTS_AREAPORTAL 0x8000
+
+#define Q2CONTENTS_PLAYERCLIP 0x10000
+#define Q2CONTENTS_MONSTERCLIP 0x20000
+
+// currents can be added to any other contents, and may be mixed
+#define Q2CONTENTS_CURRENT_0 0x40000
+#define Q2CONTENTS_CURRENT_90 0x80000
+#define Q2CONTENTS_CURRENT_180 0x100000
+#define Q2CONTENTS_CURRENT_270 0x200000
+#define Q2CONTENTS_CURRENT_UP 0x400000
+#define Q2CONTENTS_CURRENT_DOWN 0x800000
+
+#define Q2CONTENTS_ORIGIN 0x1000000 // removed before bsping an entity
+
+#define Q2CONTENTS_MONSTER 0x2000000 // should never be on a brush, only in game
+#define Q2CONTENTS_DEADMONSTER 0x4000000
+#define Q2CONTENTS_DETAIL 0x8000000 // brushes to be added after vis leafs
+#define Q2CONTENTS_TRANSLUCENT 0x10000000 // auto set if any surface has trans
+#define Q2CONTENTS_LADDER 0x20000000
+
+
+
+#define Q2SURF_LIGHT 0x1 // value will hold the light strength
+
+#define Q2SURF_SLICK 0x2 // effects game physics
+
+#define Q2SURF_SKY 0x4 // don't draw, but add to skybox
+#define Q2SURF_WARP 0x8 // turbulent water warp
+#define Q2SURF_TRANS33 0x10
+#define Q2SURF_TRANS66 0x20
+#define Q2SURF_FLOWING 0x40 // scroll towards angle
+#define Q2SURF_NODRAW 0x80 // don't bother referencing the texture
+
+
+
+
+typedef struct q2dnode_s
+{
+ int planenum;
+ int children[2]; // negative numbers are -(leafs+1), not nodes
+ short mins[3]; // for frustom culling
+ short maxs[3];
+ unsigned short firstface;
+ unsigned short numfaces; // counting both sides
+} q2dnode_t;
+
+
+typedef struct q2texinfo_s
+{
+ float vecs[2][4]; // [s/t][xyz offset]
+ int flags; // miptex flags + overrides
+ int value; // light emission, etc
+ char texture[32]; // texture name (textures/*.wal)
+ int nexttexinfo; // for animations, -1 = end of chain
+} q2texinfo_t;
+
+typedef struct q2dleaf_s
+{
+ int contents; // OR of all brushes (not needed?)
+
+ short cluster;
+ short area;
+
+ short mins[3]; // for frustum culling
+ short maxs[3];
+
+ unsigned short firstleafface;
+ unsigned short numleaffaces;
+
+ unsigned short firstleafbrush;
+ unsigned short numleafbrushes;
+} q2dleaf_t;
+
+typedef struct q2dbrushside_s
+{
+ unsigned short planenum; // facing out of the leaf
+ short texinfo;
+} q2dbrushside_t;
+
+typedef struct q2dbrush_s
+{
+ int firstside;
+ int numsides;
+ int contents;
+} q2dbrush_t;
+
+
+// the visibility lump consists of a header with a count, then
+// byte offsets for the PVS and PHS of each cluster, then the raw
+// compressed bit vectors
+#define Q2DVIS_PVS 0
+#define Q2DVIS_PHS 1
+typedef struct q2dvis_s
+{
+ int numclusters;
+ int bitofs[8][2]; // bitofs[numclusters][2]
+} q2dvis_t;
+
+// each area has a list of portals that lead into other areas
+// when portals are closed, other areas may not be visible or
+// hearable even if the vis info says that it should be
+typedef struct q2dareaportal_s
+{
+ int portalnum;
+ int otherarea;
+} q2dareaportal_t;
+
+typedef struct q2darea_s
+{
+ int numareaportals;
+ int firstareaportal;
+} q2darea_t;
+
+
+//Q3 bsp stuff
+
+#define Q3BSPVERSION 46
+#define Q3BSPVERSION_LIVE 47
+#define Q3BSPVERSION_IG 48
+
+#define Q3LUMP_ENTITIES 0 // entities to spawn (used by server and client)
+#define Q3LUMP_TEXTURES 1 // textures used (used by faces)
+#define Q3LUMP_PLANES 2 // planes used (used by bsp nodes)
+#define Q3LUMP_NODES 3 // bsp nodes (used by bsp nodes, bsp leafs, rendering, collisions)
+#define Q3LUMP_LEAFS 4 // bsp leafs (used by bsp nodes)
+#define Q3LUMP_LEAFFACES 5 // array of ints indexing faces (used by leafs)
+#define Q3LUMP_LEAFBRUSHES 6 // array of ints indexing brushes (used by leafs)
+#define Q3LUMP_MODELS 7 // models (used by rendering, collisions)
+#define Q3LUMP_BRUSHES 8 // brushes (used by effects, collisions)
+#define Q3LUMP_BRUSHSIDES 9 // brush faces (used by brushes)
+#define Q3LUMP_VERTICES 10 // mesh vertices (used by faces)
+#define Q3LUMP_TRIANGLES 11 // mesh triangles (used by faces)
+#define Q3LUMP_EFFECTS 12 // fog (used by faces)
+#define Q3LUMP_FACES 13 // surfaces (used by leafs)
+#define Q3LUMP_LIGHTMAPS 14 // lightmap textures (used by faces)
+#define Q3LUMP_LIGHTGRID 15 // lighting as a voxel grid (used by rendering)
+#define Q3LUMP_PVS 16 // potentially visible set; bit[clusters][clusters] (used by rendering)
+#define Q3HEADER_LUMPS 17
+#define Q3LUMP_ADVERTISEMENTS 17 // quake live stuff written by zeroradiant's q3map2 (ignored by DP)
+#define Q3HEADER_LUMPS_LIVE 18
+#define Q3HEADER_LUMPS_MAX 18
+
+typedef struct q3dheader_s
+{
+ int ident;
+ int version;
+ lump_t lumps[Q3HEADER_LUMPS_MAX];
+} q3dheader_t;
+
+typedef struct q3dtexture_s
+{
+ char name[Q3PATHLENGTH];
+ int surfaceflags;
+ int contents;
+}
+q3dtexture_t;
+
+// note: planes are paired, the pair of planes with i and i ^ 1 are opposites.
+typedef struct q3dplane_s
+{
+ float normal[3];
+ float dist;
+}
+q3dplane_t;
+
+typedef struct q3dnode_s
+{
+ int planeindex;
+ int childrenindex[2];
+ int mins[3];
+ int maxs[3];
+}
+q3dnode_t;
+
+typedef struct q3dleaf_s
+{
+ int clusterindex; // pvs index
+ int areaindex; // area index
+ int mins[3];
+ int maxs[3];
+ int firstleafface;
+ int numleaffaces;
+ int firstleafbrush;
+ int numleafbrushes;
+}
+q3dleaf_t;
+
+typedef struct q3dmodel_s
+{
+ float mins[3];
+ float maxs[3];
+ int firstface;
+ int numfaces;
+ int firstbrush;
+ int numbrushes;
+}
+q3dmodel_t;
+
+typedef struct q3dbrush_s
+{
+ int firstbrushside;
+ int numbrushsides;
+ int textureindex;
+}
+q3dbrush_t;
+
+typedef struct q3dbrushside_s
+{
+ int planeindex;
+ int textureindex;
+}
+q3dbrushside_t;
+
+typedef struct q3dbrushside_ig_s
+{
+ int planeindex;
+ int textureindex;
+ int surfaceflags;
+}
+q3dbrushside_ig_t;
+
+typedef struct q3dvertex_s
+{
+ float origin3f[3];
+ float texcoord2f[2];
+ float lightmap2f[2];
+ float normal3f[3];
+ unsigned char color4ub[4];
+}
+q3dvertex_t;
+
+typedef struct q3dmeshvertex_s
+{
+ int offset; // first vertex index of mesh
+}
+q3dmeshvertex_t;
+
+typedef struct q3deffect_s
+{
+ char shadername[Q3PATHLENGTH];
+ int brushindex;
+ int unknown; // I read this is always 5 except in q3dm8 which has one effect with -1
+}
+q3deffect_t;
+
+#define Q3FACETYPE_FLAT 1 // common
+#define Q3FACETYPE_PATCH 2 // common
+#define Q3FACETYPE_MESH 3 // common
+#define Q3FACETYPE_FLARE 4 // rare (is this ever used?)
+
+typedef struct q3dface_s
+{
+ int textureindex;
+ int effectindex; // -1 if none
+ int type; // Q3FACETYPE
+ int firstvertex;
+ int numvertices;
+ int firstelement;
+ int numelements;
+ int lightmapindex; // -1 if none
+ int lightmap_base[2];
+ int lightmap_size[2];
+ union
+ {
+ struct
+ {
+ // corrupt or don't care
+ int blah[14];
+ }
+ unknown;
+ struct
+ {
+ // Q3FACETYPE_FLAT
+ // mesh is a collection of triangles on a plane, renderable as a mesh (NOT a polygon)
+ float lightmap_origin[3];
+ float lightmap_vectors[2][3];
+ float normal[3];
+ int unused1[2];
+ }
+ flat;
+ struct
+ {
+ // Q3FACETYPE_PATCH
+ // patch renders as a bezier mesh, with adjustable tesselation
+ // level (optionally based on LOD using the bbox and polygon
+ // count to choose a tesselation level)
+ // note: multiple patches may have the same bbox to cause them to
+ // be LOD adjusted together as a group
+ int unused1[3];
+ float mins[3]; // LOD bbox
+ float maxs[3]; // LOD bbox
+ int unused2[3];
+ int patchsize[2]; // dimensions of vertex grid
+ }
+ patch;
+ struct
+ {
+ // Q3FACETYPE_MESH
+ // mesh renders as simply a triangle mesh
+ int unused1[3];
+ float mins[3];
+ float maxs[3];
+ int unused2[5];
+ }
+ mesh;
+ struct
+ {
+ // Q3FACETYPE_FLARE
+ // flare renders as a simple sprite at origin, no geometry
+ // exists, nor does it have a radius, a cvar controls the radius
+ // and another cvar controls distance fade
+ // (they were not used in Q3 I'm told)
+ float origin[3];
+ int unused1[11];
+ }
+ flare;
+ }
+ specific;
+}
+q3dface_t;
+
+typedef struct q3dlightmap_s
+{
+ unsigned char rgb[128*128*3];
+}
+q3dlightmap_t;
+
+typedef struct q3dlightgrid_s
+{
+ unsigned char ambientrgb[3];
+ unsigned char diffusergb[3];
+ unsigned char diffusepitch;
+ unsigned char diffuseyaw;
+}
+q3dlightgrid_t;
+
+typedef struct q3dpvs_s
+{
+ int numclusters;
+ int chainlength;
+ // unsigned char chains[];
+ // containing bits in 0-7 order (not 7-0 order),
+ // pvschains[mycluster * chainlength + (thatcluster >> 3)] & (1 << (thatcluster & 7))
+}
+q3dpvs_t;
+
+// surfaceflags from bsp
+#define Q3SURFACEFLAG_NODAMAGE 1
+#define Q3SURFACEFLAG_SLICK 2
+#define Q3SURFACEFLAG_SKY 4
+#define Q3SURFACEFLAG_LADDER 8
+#define Q3SURFACEFLAG_NOIMPACT 16
+#define Q3SURFACEFLAG_NOMARKS 32
+#define Q3SURFACEFLAG_FLESH 64
+#define Q3SURFACEFLAG_NODRAW 128
+#define Q3SURFACEFLAG_HINT 256
+#define Q3SURFACEFLAG_SKIP 512
+#define Q3SURFACEFLAG_NOLIGHTMAP 1024
+#define Q3SURFACEFLAG_POINTLIGHT 2048
+#define Q3SURFACEFLAG_METALSTEPS 4096
+#define Q3SURFACEFLAG_NOSTEPS 8192
+#define Q3SURFACEFLAG_NONSOLID 16384
+#define Q3SURFACEFLAG_LIGHTFILTER 32768
+#define Q3SURFACEFLAG_ALPHASHADOW 65536
+#define Q3SURFACEFLAG_NODLIGHT 131072
+#define Q3SURFACEFLAG_DUST 262144
+
+// surfaceparms from shaders
+#define Q3SURFACEPARM_ALPHASHADOW 1
+#define Q3SURFACEPARM_AREAPORTAL 2
+#define Q3SURFACEPARM_CLUSTERPORTAL 4
+#define Q3SURFACEPARM_DETAIL 8
+#define Q3SURFACEPARM_DONOTENTER 16
+#define Q3SURFACEPARM_FOG 32
+#define Q3SURFACEPARM_LAVA 64
+#define Q3SURFACEPARM_LIGHTFILTER 128
+#define Q3SURFACEPARM_METALSTEPS 256
+#define Q3SURFACEPARM_NODAMAGE 512
+#define Q3SURFACEPARM_NODLIGHT 1024
+#define Q3SURFACEPARM_NODRAW 2048
+#define Q3SURFACEPARM_NODROP 4096
+#define Q3SURFACEPARM_NOIMPACT 8192
+#define Q3SURFACEPARM_NOLIGHTMAP 16384
+#define Q3SURFACEPARM_NOMARKS 32768
+#define Q3SURFACEPARM_NOMIPMAPS 65536
+#define Q3SURFACEPARM_NONSOLID 131072
+#define Q3SURFACEPARM_ORIGIN 262144
+#define Q3SURFACEPARM_PLAYERCLIP 524288
+#define Q3SURFACEPARM_SKY 1048576
+#define Q3SURFACEPARM_SLICK 2097152
+#define Q3SURFACEPARM_SLIME 4194304
+#define Q3SURFACEPARM_STRUCTURAL 8388608
+#define Q3SURFACEPARM_TRANS 16777216
+#define Q3SURFACEPARM_WATER 33554432
+#define Q3SURFACEPARM_POINTLIGHT 67108864
+#define Q3SURFACEPARM_HINT 134217728
+#define Q3SURFACEPARM_DUST 268435456
+#define Q3SURFACEPARM_BOTCLIP 536870912
+#define Q3SURFACEPARM_LIGHTGRID 1073741824
+#define Q3SURFACEPARM_ANTIPORTAL 2147483648u
+
+typedef struct q3mbrush_s
+{
+ struct colbrushf_s *colbrushf;
+ int numbrushsides;
+ struct q3mbrushside_s *firstbrushside;
+ struct texture_s *texture;
+}
+q3mbrush_t;
+
+typedef struct q3mbrushside_s
+{
+ struct mplane_s *plane;
+ struct texture_s *texture;
+}
+q3mbrushside_t;
+
+// the first cast is to shut up a stupid warning by clang, the second cast is to make both sides have the same type
+#define CHECKPVSBIT(pvs,b) ((b) >= 0 ? (unsigned char) ((pvs)[(b) >> 3] & (1 << ((b) & 7))) : (unsigned char) false)
+#define SETPVSBIT(pvs,b) (void) ((b) >= 0 ? (unsigned char) ((pvs)[(b) >> 3] |= (1 << ((b) & 7))) : (unsigned char) false)
+#define CLEARPVSBIT(pvs,b) (void) ((b) >= 0 ? (unsigned char) ((pvs)[(b) >> 3] &= ~(1 << ((b) & 7))) : (unsigned char) false)
+
+#endif
+