cvar_t cl_bob2 = {CVAR_SAVE, "cl_bob2","0", "sideways view bobbing amount"};
cvar_t cl_bob2cycle = {CVAR_SAVE, "cl_bob2cycle","0.6", "sideways view bobbing speed"};
cvar_t cl_bob2smooth = {CVAR_SAVE, "cl_bob2smooth","0.05", "how fast the view goes back when you stop touching the ground"};
+cvar_t cl_bobfall = {CVAR_SAVE, "cl_bobfall","0", "how much the view swings down when falling (influenced by the speed you hit the ground with)"};
+cvar_t cl_bobfallcycle = {CVAR_SAVE, "cl_bobfallcycle","3", "speed of the bobfall swing"};
+cvar_t cl_bobfallminspeed = {CVAR_SAVE, "cl_bobfallminspeed","200", "necessary amount of speed for bob-falling to occur"};
cvar_t cl_bobmodel = {CVAR_SAVE, "cl_bobmodel", "1", "enables gun bobbing"};
cvar_t cl_bobmodel_side = {CVAR_SAVE, "cl_bobmodel_side", "0.15", "gun bobbing sideways sway amount"};
cvar_t cl_bobmodel_up = {CVAR_SAVE, "cl_bobmodel_up", "0.06", "gun bobbing upward movement amount"};
cvar_t cl_bobmodel_speed = {CVAR_SAVE, "cl_bobmodel_speed", "7", "gun bobbing speed"};
+
cvar_t cl_leanmodel = {CVAR_SAVE, "cl_leanmodel", "0", "enables gun leaning"};
cvar_t cl_leanmodel_side_speed = {CVAR_SAVE, "cl_leanmodel_side_speed", "0.7", "gun leaning sideways speed"};
cvar_t cl_leanmodel_side_limit = {CVAR_SAVE, "cl_leanmodel_side_limit", "35", "gun leaning sideways limit"};
cvar_t cl_leanmodel_side_highpass1 = {CVAR_SAVE, "cl_leanmodel_side_highpass1", "30", "gun leaning sideways pre-highpass in 1/s"};
-cvar_t cl_leanmodel_side_highpass = {CVAR_SAVE, "cl_leanmodel_side_highpass", "5", "gun leaning sideways highpass in 1/s"};
-cvar_t cl_leanmodel_side_lowpass = {CVAR_SAVE, "cl_leanmodel_side_lowpass", "30", "gun leaning sideways lowpass in 1/s"};
+cvar_t cl_leanmodel_side_highpass = {CVAR_SAVE, "cl_leanmodel_side_highpass", "3", "gun leaning sideways highpass in 1/s"};
+cvar_t cl_leanmodel_side_lowpass = {CVAR_SAVE, "cl_leanmodel_side_lowpass", "20", "gun leaning sideways lowpass in 1/s"};
cvar_t cl_leanmodel_up_speed = {CVAR_SAVE, "cl_leanmodel_up_speed", "0.65", "gun leaning upward speed"};
cvar_t cl_leanmodel_up_limit = {CVAR_SAVE, "cl_leanmodel_up_limit", "50", "gun leaning upward limit"};
cvar_t cl_leanmodel_up_highpass1 = {CVAR_SAVE, "cl_leanmodel_up_highpass1", "5", "gun leaning upward pre-highpass in 1/s"};
cvar_t cl_leanmodel_up_highpass = {CVAR_SAVE, "cl_leanmodel_up_highpass", "15", "gun leaning upward highpass in 1/s"};
-cvar_t cl_leanmodel_up_lowpass = {CVAR_SAVE, "cl_leanmodel_up_lowpass", "30", "gun leaning upward lowpass in 1/s"};
+cvar_t cl_leanmodel_up_lowpass = {CVAR_SAVE, "cl_leanmodel_up_lowpass", "20", "gun leaning upward lowpass in 1/s"};
cvar_t cl_followmodel = {CVAR_SAVE, "cl_followmodel", "0", "enables gun following"};
cvar_t cl_followmodel_side_speed = {CVAR_SAVE, "cl_followmodel_side_speed", "0.25", "gun following sideways speed"};
cvar_t cl_followmodel_side_limit = {CVAR_SAVE, "cl_followmodel_side_limit", "6", "gun following sideways limit"};
cvar_t cl_followmodel_side_highpass1 = {CVAR_SAVE, "cl_followmodel_side_highpass1", "30", "gun following sideways pre-highpass in 1/s"};
cvar_t cl_followmodel_side_highpass = {CVAR_SAVE, "cl_followmodel_side_highpass", "5", "gun following sideways highpass in 1/s"};
-cvar_t cl_followmodel_side_lowpass = {CVAR_SAVE, "cl_followmodel_side_lowpass", "30", "gun following sideways lowpass in 1/s"};
+cvar_t cl_followmodel_side_lowpass = {CVAR_SAVE, "cl_followmodel_side_lowpass", "10", "gun following sideways lowpass in 1/s"};
cvar_t cl_followmodel_up_speed = {CVAR_SAVE, "cl_followmodel_up_speed", "0.5", "gun following upward speed"};
cvar_t cl_followmodel_up_limit = {CVAR_SAVE, "cl_followmodel_up_limit", "5", "gun following upward limit"};
cvar_t cl_followmodel_up_highpass1 = {CVAR_SAVE, "cl_followmodel_up_highpass1", "60", "gun following upward pre-highpass in 1/s"};
-cvar_t cl_followmodel_up_highpass = {CVAR_SAVE, "cl_followmodel_up_highpass", "3", "gun following upward highpass in 1/s"};
-cvar_t cl_followmodel_up_lowpass = {CVAR_SAVE, "cl_followmodel_up_lowpass", "30", "gun following upward lowpass in 1/s"};
+cvar_t cl_followmodel_up_highpass = {CVAR_SAVE, "cl_followmodel_up_highpass", "2", "gun following upward highpass in 1/s"};
+cvar_t cl_followmodel_up_lowpass = {CVAR_SAVE, "cl_followmodel_up_lowpass", "10", "gun following upward lowpass in 1/s"};
cvar_t cl_viewmodel_scale = {0, "cl_viewmodel_scale", "1", "changes size of gun model, lower values prevent poking into walls but cause strange artifacts on lighting and especially r_stereo/vid_stereobuffer options where the size of the gun becomes visible"};
else
{
if (cl.stairsmoothz < vieworg[2])
- vieworg[2] = cl.stairsmoothz = bound(vieworg[2] - 16, cl.stairsmoothz + smoothtime * cl_stairsmoothspeed.value, vieworg[2]);
+ vieworg[2] = cl.stairsmoothz = bound(vieworg[2] - cl.movevars_stepheight, cl.stairsmoothz + smoothtime * cl_stairsmoothspeed.value, vieworg[2]);
else if (cl.stairsmoothz > vieworg[2])
- vieworg[2] = cl.stairsmoothz = bound(vieworg[2], cl.stairsmoothz - smoothtime * cl_stairsmoothspeed.value, vieworg[2] + 16);
+ vieworg[2] = cl.stairsmoothz = bound(vieworg[2], cl.stairsmoothz - smoothtime * cl_stairsmoothspeed.value, vieworg[2] + cl.movevars_stepheight);
}
// apply qw weapon recoil effect (this did not work in QW)
VectorAdd(vieworg, cl.punchvector, vieworg);
if (cl.stats[STAT_HEALTH] > 0)
{
- double xyspeed, bob;
+ double xyspeed, bob, bobfall;
float cycle;
vec_t frametime;
VectorAdd(vieworg, gunorg, gunorg);
VectorAdd(viewangles, gunangles, gunangles);
+ // bounded XY speed, used by several effects below
+ xyspeed = bound (0, sqrt(cl.velocity[0]*cl.velocity[0] + cl.velocity[1]*cl.velocity[1]), 400);
+
// vertical view bobbing code
- xyspeed = sqrt(cl.velocity[0]*cl.velocity[0] + cl.velocity[1]*cl.velocity[1]);
if (cl_bob.value && cl_bobcycle.value)
{
// LordHavoc: this code is *weird*, but not replacable (I think it
cycle = cl.time / cl_bob2cycle.value;
cycle -= (int) cycle;
if (cycle < 0.5)
- cycle = sin(M_PI * cycle / 0.5);
+ cycle = cos(M_PI * cycle / 0.5); // cos looks better here with the other view bobbing using sin
else
- cycle = sin(M_PI + M_PI * (cycle-0.5)/0.5);
- bob = xyspeed * bound(0, cl_bob2.value, 0.05) * cycle;
+ cycle = cos(M_PI + M_PI * (cycle-0.5)/0.5);
+ bob = bound(0, cl_bob2.value, 0.05) * cycle;
// this value slowly decreases from 1 to 0 when we stop touching the ground.
// The cycle is later multiplied with it so the view smooths back to normal
- if (cl.onground && !cl.cmd.jump) // also block while the jump button is pressed, to avoid twitches when bunny-hopping
+ if (cl.onground && !cl.cmd.jump) // also block the effect while the jump button is pressed, to avoid twitches when bunny-hopping
cl.bob2_smooth = 1;
else
{
cl.bob2_smooth = 0;
}
- // calculate the side and front of the player between the X and Y axes
+ // calculate the front and side of the player between the X and Y axes
AngleVectors(viewangles, forward, right, up);
- // now get the speed based on those angles. The division is for mathing vertical bobbing intensity
- side = DotProduct (cl.velocity, right) / 1000 * cl.bob2_smooth;
- front = DotProduct (cl.velocity, forward) / 1000 * cl.bob2_smooth;
+ // now get the speed based on those angles. The bounds should match the same value as xyspeed's
+ side = bound(-400, DotProduct (cl.velocity, right) * cl.bob2_smooth, 400);
+ front = bound(-400, DotProduct (cl.velocity, forward) * cl.bob2_smooth, 400);
VectorScale(forward, bob, forward);
VectorScale(right, bob, right);
// we use side with forward and front with right, so the bobbing goes
gunorg[1] += bob2vel[1];
}
+ // fall bobbing code
+ // causes the view to swing down and back up when touching the ground
+ if (cl_bobfall.value && cl_bobfallcycle.value)
+ {
+ if (!cl.onground)
+ {
+ cl.bobfall_speed = bound(-400, cl.velocity[2], 0) * bound(0, cl_bobfall.value, 0.1);
+ if (cl.velocity[2] < -cl_bobfallminspeed.value)
+ cl.bobfall_swing = 1;
+ else
+ cl.bobfall_swing = 0;
+ }
+ else
+ {
+ if(cl.bobfall_swing > 0)
+ cl.bobfall_swing -= bound(0, cl_bobfallcycle.value * frametime, 1);
+ else
+ cl.bobfall_swing = 0;
+
+ bobfall = sin(M_PI * cl.bobfall_swing) * cl.bobfall_speed;
+ vieworg[2] += bobfall;
+ gunorg[2] += bobfall;
+ }
+ }
+
// gun model bobbing code
- if (cl_bob.value && cl_bobmodel.value)
+ if (cl_bobmodel.value)
{
// calculate for swinging gun model
// the gun bobs when running on the ground, but doesn't bob when you're in the air.
t *= 5;
}
- bspeed = bound (0, xyspeed, 400) * 0.01f;
+ bspeed = xyspeed * 0.01f;
AngleVectors (gunangles, forward, right, up);
bob = bspeed * cl_bobmodel_side.value * cl_viewmodel_scale.value * sin (s) * t;
VectorMA (gunorg, bob, right, gunorg);
Cvar_RegisterVariable (&cl_bob2);
Cvar_RegisterVariable (&cl_bob2cycle);
Cvar_RegisterVariable (&cl_bob2smooth);
+ Cvar_RegisterVariable (&cl_bobfall);
+ Cvar_RegisterVariable (&cl_bobfallcycle);
+ Cvar_RegisterVariable (&cl_bobfallminspeed);
Cvar_RegisterVariable (&cl_bobmodel);
Cvar_RegisterVariable (&cl_bobmodel_side);
Cvar_RegisterVariable (&cl_bobmodel_up);