cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 struct
 201 {
 202         const char *name;
 203         int impulse;
 204         int weaponbit;
 205         int ammostat;
 206         int ammomin;
 207 }
 208 in_bestweapon_info[] =
 209 {
 210         {"1", 1, IT_AXE, STAT_SHELLS, 0},
 211         {"2", 2, IT_SHOTGUN, STAT_SHELLS, 1},
 212         {"3", 3, IT_SUPER_SHOTGUN, STAT_SHELLS, 1},
 213         {"4", 4, IT_NAILGUN, STAT_NAILS, 1},
 214         {"5", 5, IT_SUPER_NAILGUN, STAT_NAILS, 1},
 215         {"6", 6, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1},
 216         {"7", 7, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1},
 217         {"8", 8, IT_LIGHTNING, STAT_CELLS, 1},
 218         {"9", 9, 128, STAT_CELLS, 1}, // generic energy weapon for mods
 219         {"p", 209, 128, STAT_CELLS, 1}, // dpmod plasma gun
 220         {"w", 210, 8388608, STAT_CELLS, 1}, // dpmod plasma wave cannon
 221         {"l", 225, HIT_LASER_CANNON, STAT_CELLS, 1}, // hipnotic laser cannon
 222         {"h", 226, HIT_MJOLNIR, STAT_CELLS, 0}, // hipnotic mjolnir hammer
 223         {NULL, 0, 0, 0, 0}
 224 };
 225 void IN_BestWeapon (void)
 226 {
 227         int i, n;
 228         const char *t;
 229         if (Cmd_Argc() < 2)
 230         {
 231                 Con_Printf("bestweapon requires 1 or more parameters\n");
 232                 return;
 233         }
 234         for (i = 1;i < Cmd_Argc();i++)
 235         {
 236                 t = Cmd_Argv(i);
 237                 // figure out which weapon this character refers to
 238                 for (n = 0;in_bestweapon_info[n].name;n++)
 239                 {
 240                         if (!strcmp(in_bestweapon_info[n].name, t))
 241                         {
 242                                 // we found out what weapon this character refers to
 243                                 // check if the inventory contains the weapon and enough ammo
 244                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 245                                 {
 246                                         // we found one of the weapons the player wanted
 247                                         // send an impulse to switch to it
 248                                         in_impulse = in_bestweapon_info[n].impulse;
 249                                         return;
 250                                 }
 251                                 break;
 252                         }
 253                 }
 254                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 255         }
 256         // if we couldn't find any of the weapons, there's nothing more we can do...
 257 }
 258
 259 /*
 260 ===============
 261 CL_KeyState
 262
 263 Returns 0.25 if a key was pressed and released during the frame,
 264 0.5 if it was pressed and held
 265 0 if held then released, and
 266 1.0 if held for the entire time
 267 ===============
 268 */
 269 float CL_KeyState (kbutton_t *key)
 270 {
 271         float           val;
 272         qboolean        impulsedown, impulseup, down;
 273
 274         impulsedown = key->state & 2;
 275         impulseup = key->state & 4;
 276         down = key->state & 1;
 277         val = 0;
 278
 279         if (impulsedown && !impulseup)
 280         {
 281                 if (down)
 282                         val = 0.5;      // pressed and held this frame
 283                 else
 284                         val = 0;        //      I_Error ();
 285         }
 286         if (impulseup && !impulsedown)
 287         {
 288                 if (down)
 289                         val = 0;        //      I_Error ();
 290                 else
 291                         val = 0;        // released this frame
 292         }
 293         if (!impulsedown && !impulseup)
 294         {
 295                 if (down)
 296                         val = 1.0;      // held the entire frame
 297                 else
 298                         val = 0;        // up the entire frame
 299         }
 300         if (impulsedown && impulseup)
 301         {
 302                 if (down)
 303                         val = 0.75;     // released and re-pressed this frame
 304                 else
 305                         val = 0.25;     // pressed and released this frame
 306         }
 307
 308         key->state &= 1;                // clear impulses
 309
 310         return val;
 311 }
 312
 313
 314
 315
 316 //==========================================================================
 317
 318 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 319 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 320 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 321 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 322
 323 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 324
 325 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 326 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 327
 328 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 329
 330 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 331 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
 332 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 333 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 334 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 335 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 336 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_friction), if less than 0 the cl_movement_friction variable is used instead"};
 337 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "2", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 338 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 339 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 340 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 341 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 342 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 343 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (should match sv_airaccel_qw)"};
 344 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction)"};
 345 cvar_t cl_gravity = {0, "cl_gravity", "800", "how much gravity to apply in client physics (should match sv_gravity)"};
 346 cvar_t cl_slowmo = {0, "cl_slowmo", "1", "speed of game time (should match slowmo)"};
 347
 348 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
 349 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
 350
 351 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 352
 353 cvar_t cl_netinputpacketspersecond = {CVAR_SAVE, "cl_netinputpacketspersecond","50", "how many input packets to send to server each second"};
 354 cvar_t cl_netinputpacketlosstolerance = {CVAR_SAVE, "cl_netinputpacketlosstolerance", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
 355
 356 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 357
 358
 359 /*
 360 ================
 361 CL_AdjustAngles
 362
 363 Moves the local angle positions
 364 ================
 365 */
 366 void CL_AdjustAngles (void)
 367 {
 368         float   speed;
 369         float   up, down;
 370
 371         if (in_speed.state & 1)
 372                 speed = cl.realframetime * cl_anglespeedkey.value;
 373         else
 374                 speed = cl.realframetime;
 375
 376         if (!(in_strafe.state & 1))
 377         {
 378                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 379                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 380         }
 381         if (in_klook.state & 1)
 382         {
 383                 V_StopPitchDrift ();
 384                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 385                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 386         }
 387
 388         up = CL_KeyState (&in_lookup);
 389         down = CL_KeyState(&in_lookdown);
 390
 391         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 392         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 393
 394         if (up || down)
 395                 V_StopPitchDrift ();
 396
 397         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 398         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
 399         cl.viewangles[ROLL] = ANGLEMOD(cl.viewangles[ROLL]);
 400         if (cl.viewangles[YAW] >= 180)
 401                 cl.viewangles[YAW] -= 360;
 402         if (cl.viewangles[PITCH] >= 180)
 403                 cl.viewangles[PITCH] -= 360;
 404         if (cl.viewangles[ROLL] >= 180)
 405                 cl.viewangles[ROLL] -= 360;
 406
 407         cl.viewangles[PITCH] = bound (in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 408         cl.viewangles[ROLL] = bound(-50, cl.viewangles[ROLL], 50);
 409 }
 410
 411 qboolean cl_ignoremousemove = false;
 412
 413 /*
 414 ================
 415 CL_Input
 416
 417 Send the intended movement message to the server
 418 ================
 419 */
 420 void CL_Input (void)
 421 {
 422         float mx, my;
 423         static float old_mouse_x = 0, old_mouse_y = 0;
 424
 425         // clamp before the move to prevent starting with bad angles
 426         CL_AdjustAngles ();
 427
 428         // reset some of the command fields
 429         cl.cmd.forwardmove = 0;
 430         cl.cmd.sidemove = 0;
 431         cl.cmd.upmove = 0;
 432
 433         // get basic movement from keyboard
 434         if (in_strafe.state & 1)
 435         {
 436                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 437                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 438         }
 439
 440         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 441         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 442
 443         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 444         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 445
 446         if (! (in_klook.state & 1) )
 447         {
 448                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 449                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 450         }
 451
 452         // adjust for speed key
 453         if (in_speed.state & 1)
 454         {
 455                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 456                 cl.cmd.sidemove *= cl_movespeedkey.value;
 457                 cl.cmd.upmove *= cl_movespeedkey.value;
 458         }
 459
 460         in_mouse_x = 0;
 461         in_mouse_y = 0;
 462
 463         // allow mice or other external controllers to add to the move
 464         IN_Move ();
 465
 466         // ignore a mouse move if mouse was activated/deactivated this frame
 467         if (cl_ignoremousemove)
 468         {
 469                 cl_ignoremousemove = false;
 470                 in_mouse_x = 0;
 471                 in_mouse_y = 0;
 472         }
 473
 474         // apply m_filter if it is on
 475         mx = in_mouse_x;
 476         my = in_mouse_y;
 477         if (m_filter.integer)
 478         {
 479                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 480                 in_mouse_y = (my + old_mouse_y) * 0.5;
 481         }
 482         old_mouse_x = mx;
 483         old_mouse_y = my;
 484
 485         // if not in menu, apply mouse move to viewangles/movement
 486         if (!cl.csqc_wantsmousemove && in_client_mouse)
 487         {
 488                 if (cl_prydoncursor.integer)
 489                 {
 490                         // mouse interacting with the scene, mostly stationary view
 491                         V_StopPitchDrift();
 492                         cl.cmd.cursor_screen[0] += in_mouse_x * sensitivity.value / vid.width;
 493                         cl.cmd.cursor_screen[1] += in_mouse_y * sensitivity.value / vid.height;
 494                 }
 495                 else if (in_strafe.state & 1)
 496                 {
 497                         // strafing mode, all looking is movement
 498                         V_StopPitchDrift();
 499                         cl.cmd.sidemove += m_side.value * in_mouse_x * sensitivity.value;
 500                         if (noclip_anglehack)
 501                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * sensitivity.value;
 502                         else
 503                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * sensitivity.value;
 504                 }
 505                 else if ((in_mlook.state & 1) || freelook.integer)
 506                 {
 507                         // mouselook, lookstrafe causes turning to become strafing
 508                         V_StopPitchDrift();
 509                         if (lookstrafe.integer)
 510                                 cl.cmd.sidemove += m_side.value * in_mouse_x * sensitivity.value;
 511                         else
 512                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * sensitivity.value * cl.viewzoom;
 513                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * sensitivity.value * cl.viewzoom;
 514                 }
 515                 else
 516                 {
 517                         // non-mouselook, yaw turning and forward/back movement
 518                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * sensitivity.value * cl.viewzoom;
 519                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * sensitivity.value;
 520                 }
 521         }
 522
 523         // clamp after the move to prevent rendering with bad angles
 524         CL_AdjustAngles ();
 525 }
 526
 527 #include "cl_collision.h"
 528
 529 void CL_UpdatePrydonCursor(void)
 530 {
 531         vec3_t temp;
 532
 533         if (!cl_prydoncursor.integer)
 534                 VectorClear(cl.cmd.cursor_screen);
 535
 536         /*
 537         if (cl.cmd.cursor_screen[0] < -1)
 538         {
 539                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 540                 cl.cmd.cursor_screen[0] = -1;
 541         }
 542         if (cl.cmd.cursor_screen[0] > 1)
 543         {
 544                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 545                 cl.cmd.cursor_screen[0] = 1;
 546         }
 547         if (cl.cmd.cursor_screen[1] < -1)
 548         {
 549                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 550                 cl.cmd.cursor_screen[1] = -1;
 551         }
 552         if (cl.cmd.cursor_screen[1] > 1)
 553         {
 554                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 555                 cl.cmd.cursor_screen[1] = 1;
 556         }
 557         */
 558         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 559         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 560         cl.cmd.cursor_screen[2] = 1;
 561
 562         // calculate current view matrix
 563         Matrix4x4_OriginFromMatrix(&r_view.matrix, cl.cmd.cursor_start);
 564         // calculate direction vector of cursor in viewspace by using frustum slopes
 565         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, cl.cmd.cursor_screen[0] * -r_view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_view.frustum_y * 1000000);
 566         Matrix4x4_Transform(&r_view.matrix, temp, cl.cmd.cursor_end);
 567         // trace from view origin to the cursor
 568         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
 569 }
 570
 571 void CL_ClientMovement_ExpireOldMoves(void)
 572 {
 573         int i;
 574         int n;
 575         // remove stale queue items
 576         n = cl.movement_numqueue;
 577         cl.movement_numqueue = 0;
 578         if (cls.servermovesequence)
 579         {
 580                 for (i = 0;i < n;i++)
 581                 {
 582                         if (cl.movement_queue[i].sequence > cls.servermovesequence)
 583                                 cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
 584                         else
 585                                 cl.movement_replay_canjump = cl.movement_queue[i].canjump;
 586                 }
 587         }
 588 }
 589
 590 void CL_ClientMovement_Input(qboolean buttonjump, qboolean buttoncrouch)
 591 {
 592         // if time has not advanced, do nothing
 593         if (cl.movecmd[0].msec <= 0)
 594                 return;
 595         // add to input queue if there is room
 596         if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])))
 597         {
 598                 // add to input queue
 599                 cl.movement_queue[cl.movement_numqueue].sequence = cl.movecmd[0].sequence;
 600                 cl.movement_queue[cl.movement_numqueue].time = cl.movecmd[0].time;
 601                 cl.movement_queue[cl.movement_numqueue].frametime = cl.movecmd[0].msec * 0.001;
 602                 VectorCopy(cl.movecmd[0].viewangles, cl.movement_queue[cl.movement_numqueue].viewangles);
 603                 cl.movement_queue[cl.movement_numqueue].move[0] = cl.movecmd[0].forwardmove;
 604                 cl.movement_queue[cl.movement_numqueue].move[1] = cl.movecmd[0].sidemove;
 605                 cl.movement_queue[cl.movement_numqueue].move[2] = cl.movecmd[0].upmove;
 606                 cl.movement_queue[cl.movement_numqueue].jump = buttonjump;
 607                 cl.movement_queue[cl.movement_numqueue].crouch = buttoncrouch;
 608                 cl.movement_numqueue++;
 609         }
 610
 611         cl.movement_replay = true;
 612 }
 613
 614 typedef enum waterlevel_e
 615 {
 616         WATERLEVEL_NONE,
 617         WATERLEVEL_WETFEET,
 618         WATERLEVEL_SWIMMING,
 619         WATERLEVEL_SUBMERGED
 620 }
 621 waterlevel_t;
 622
 623 typedef struct cl_clientmovement_state_s
 624 {
 625         // position
 626         vec3_t origin;
 627         vec3_t velocity;
 628         // current bounding box (different if crouched vs standing)
 629         vec3_t mins;
 630         vec3_t maxs;
 631         // currently on the ground
 632         qboolean onground;
 633         // currently crouching
 634         qboolean crouched;
 635         // what kind of water (SUPERCONTENTS_LAVA for instance)
 636         int watertype;
 637         // how deep
 638         waterlevel_t waterlevel;
 639         // weird hacks when jumping out of water
 640         // (this is in seconds and counts down to 0)
 641         float waterjumptime;
 642
 643         // user command
 644         client_movementqueue_t q;
 645 }
 646 cl_clientmovement_state_t;
 647
 648 #define NUMOFFSETS 27
 649 static vec3_t offsets[NUMOFFSETS] =
 650 {
 651 // 1 no nudge (just return the original if this test passes)
 652         { 0.000,  0.000,  0.000},
 653 // 6 simple nudges
 654         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 655         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 656         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 657 // 4 diagonal flat nudges
 658         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 659         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 660 // 8 diagonal upward nudges
 661         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 662         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 663         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 664         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 665 // 8 diagonal downward nudges
 666         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 667         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 668         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 669         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 670 };
 671
 672 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 673 {
 674         int i;
 675         vec3_t neworigin;
 676         for (i = 0;i < NUMOFFSETS;i++)
 677         {
 678                 VectorAdd(offsets[i], s->origin, neworigin);
 679                 if (!CL_Move(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
 680                 {
 681                         VectorCopy(neworigin, s->origin);
 682                         return true;
 683                 }
 684         }
 685         // if all offsets failed, give up
 686         return false;
 687 }
 688
 689 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 690 {
 691         vec3_t origin1, origin2;
 692         trace_t trace;
 693
 694         // make sure player is not stuck
 695         CL_ClientMovement_Unstick(s);
 696
 697         // set crouched
 698         if (s->q.crouch)
 699         {
 700                 // wants to crouch, this always works..
 701                 if (!s->crouched)
 702                         s->crouched = true;
 703         }
 704         else
 705         {
 706                 // wants to stand, if currently crouching we need to check for a
 707                 // low ceiling first
 708                 if (s->crouched)
 709                 {
 710                         trace = CL_Move(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 711                         if (!trace.startsolid)
 712                                 s->crouched = false;
 713                 }
 714         }
 715         if (s->crouched)
 716         {
 717                 VectorCopy(cl.playercrouchmins, s->mins);
 718                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 719         }
 720         else
 721         {
 722                 VectorCopy(cl.playerstandmins, s->mins);
 723                 VectorCopy(cl.playerstandmaxs, s->maxs);
 724         }
 725
 726         // set onground
 727         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 728         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 2);
 729         trace = CL_Move(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 730         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 731
 732         // set watertype/waterlevel
 733         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 734         s->waterlevel = WATERLEVEL_NONE;
 735         s->watertype = CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 736         if (s->watertype)
 737         {
 738                 s->waterlevel = WATERLEVEL_WETFEET;
 739                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 740                 if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 741                 {
 742                         s->waterlevel = WATERLEVEL_SWIMMING;
 743                         origin1[2] = s->origin[2] + 22;
 744                         if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 745                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 746                 }
 747         }
 748
 749         // water jump prediction
 750         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 751                 s->waterjumptime = 0;
 752 }
 753
 754 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 755 {
 756         int bump;
 757         double t;
 758         vec_t f;
 759         vec3_t neworigin;
 760         vec3_t currentorigin2;
 761         vec3_t neworigin2;
 762         vec3_t primalvelocity;
 763         trace_t trace;
 764         trace_t trace2;
 765         trace_t trace3;
 766         CL_ClientMovement_UpdateStatus(s);
 767         VectorCopy(s->velocity, primalvelocity);
 768         for (bump = 0, t = s->q.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 769         {
 770                 VectorMA(s->origin, t, s->velocity, neworigin);
 771                 trace = CL_Move(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 772                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 773                 {
 774                         // may be a step or wall, try stepping up
 775                         // first move forward at a higher level
 776                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
 777                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
 778                         trace2 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 779                         if (!trace2.startsolid)
 780                         {
 781                                 // then move down from there
 782                                 VectorCopy(trace2.endpos, currentorigin2);
 783                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 784                                 trace3 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 785                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 786                                 // accept the new trace if it made some progress
 787                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 788                                 {
 789                                         trace = trace2;
 790                                         VectorCopy(trace3.endpos, trace.endpos);
 791                                 }
 792                         }
 793                 }
 794
 795                 // check if it moved at all
 796                 if (trace.fraction >= 0.001)
 797                         VectorCopy(trace.endpos, s->origin);
 798
 799                 // check if it moved all the way
 800                 if (trace.fraction == 1)
 801                         break;
 802
 803                 //if (trace.plane.normal[2] > 0.7)
 804                 //      s->onground = true;
 805
 806                 t -= t * trace.fraction;
 807
 808                 f = DotProduct(s->velocity, trace.plane.normal);
 809                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 810         }
 811         if (s->waterjumptime > 0)
 812                 VectorCopy(primalvelocity, s->velocity);
 813 }
 814
 815
 816 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 817 {
 818         vec_t wishspeed;
 819         vec_t f;
 820         vec3_t wishvel;
 821         vec3_t wishdir;
 822
 823         // water jump only in certain situations
 824         // this mimics quakeworld code
 825         if (s->q.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
 826         {
 827                 vec3_t forward;
 828                 vec3_t yawangles;
 829                 vec3_t spot;
 830                 VectorSet(yawangles, 0, s->q.viewangles[1], 0);
 831                 AngleVectors(yawangles, forward, NULL, NULL);
 832                 VectorMA(s->origin, 24, forward, spot);
 833                 spot[2] += 8;
 834                 if (CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
 835                 {
 836                         spot[2] += 24;
 837                         if (!CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
 838                         {
 839                                 VectorScale(forward, 50, s->velocity);
 840                                 s->velocity[2] = 310;
 841                                 s->waterjumptime = 2;
 842                                 s->onground = false;
 843                                 s->q.canjump = false;
 844                         }
 845                 }
 846         }
 847
 848         if (!VectorLength2(s->q.move))
 849         {
 850                 // drift towards bottom
 851                 VectorSet(wishvel, 0, 0, -60);
 852         }
 853         else
 854         {
 855                 // swim
 856                 vec3_t forward;
 857                 vec3_t right;
 858                 vec3_t up;
 859                 // calculate movement vector
 860                 AngleVectors(s->q.viewangles, forward, right, up);
 861                 VectorSet(up, 0, 0, 1);
 862                 VectorMAMAM(s->q.move[0], forward, s->q.move[1], right, s->q.move[2], up, wishvel);
 863         }
 864
 865         // split wishvel into wishspeed and wishdir
 866         wishspeed = VectorLength(wishvel);
 867         if (wishspeed)
 868                 VectorScale(wishvel, 1 / wishspeed, wishdir);
 869         else
 870                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
 871         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
 872
 873         if (s->crouched)
 874                 wishspeed *= 0.5;
 875
 876         if (s->waterjumptime <= 0)
 877         {
 878                 // water friction
 879                 f = 1 - s->q.frametime * cl.movevars_waterfriction * s->waterlevel;
 880                 f = bound(0, f, 1);
 881                 VectorScale(s->velocity, f, s->velocity);
 882
 883                 // water acceleration
 884                 f = wishspeed - DotProduct(s->velocity, wishdir);
 885                 if (f > 0)
 886                 {
 887                         f = min(cl.movevars_wateraccelerate * s->q.frametime * wishspeed, f);
 888                         VectorMA(s->velocity, f, wishdir, s->velocity);
 889                 }
 890
 891                 // holding jump button swims upward slowly
 892                 if (s->q.jump)
 893                 {
 894                         if (s->watertype & SUPERCONTENTS_LAVA)
 895                                 s->velocity[2] =  50;
 896                         else if (s->watertype & SUPERCONTENTS_SLIME)
 897                                 s->velocity[2] =  80;
 898                         else
 899                         {
 900                                 if (gamemode == GAME_NEXUIZ)
 901                                         s->velocity[2] = 200;
 902                                 else
 903                                         s->velocity[2] = 100;
 904                         }
 905                 }
 906         }
 907
 908         CL_ClientMovement_Move(s);
 909 }
 910
 911 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
 912 {
 913         vec_t friction;
 914         vec_t wishspeed;
 915         vec_t addspeed;
 916         vec_t accelspeed;
 917         vec_t f;
 918         vec3_t forward;
 919         vec3_t right;
 920         vec3_t up;
 921         vec3_t wishvel;
 922         vec3_t wishdir;
 923         vec3_t yawangles;
 924         trace_t trace;
 925
 926         // jump if on ground with jump button pressed but only if it has been
 927         // released at least once since the last jump
 928         if (s->q.jump)
 929         {
 930                 if (s->onground && s->q.canjump)
 931                 {
 932                         s->velocity[2] += cl.movevars_jumpvelocity;
 933                         s->onground = false;
 934                         s->q.canjump = false;
 935                 }
 936         }
 937         else
 938                 s->q.canjump = true;
 939
 940         // calculate movement vector
 941         VectorSet(yawangles, 0, s->q.viewangles[1], 0);
 942         AngleVectors(yawangles, forward, right, up);
 943         VectorMAM(s->q.move[0], forward, s->q.move[1], right, wishvel);
 944
 945         // split wishvel into wishspeed and wishdir
 946         wishspeed = VectorLength(wishvel);
 947         if (wishspeed)
 948                 VectorScale(wishvel, 1 / wishspeed, wishdir);
 949         else
 950                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
 951         wishspeed = min(wishspeed, cl.movevars_maxspeed);
 952         if (s->crouched)
 953                 wishspeed *= 0.5;
 954
 955         // check if onground
 956         if (s->onground)
 957         {
 958                 // apply edge friction
 959                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
 960                 friction = cl.movevars_friction;
 961                 if (f > 0 && cl.movevars_edgefriction != 1)
 962                 {
 963                         vec3_t neworigin2;
 964                         vec3_t neworigin3;
 965                         // note: QW uses the full player box for the trace, and yet still
 966                         // uses s->origin[2] + s->mins[2], which is clearly an bug, but
 967                         // this mimics it for compatibility
 968                         VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
 969                         VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
 970                         if (cls.protocol == PROTOCOL_QUAKEWORLD)
 971                                 trace = CL_Move(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 972                         else
 973                                 trace = CL_Move(neworigin2, vec3_origin, vec3_origin, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 974                         if (trace.fraction == 1 && !trace.startsolid)
 975                                 friction *= cl.movevars_edgefriction;
 976                 }
 977                 // apply ground friction
 978                 f = 1 - s->q.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
 979                 f = max(f, 0);
 980                 VectorScale(s->velocity, f, s->velocity);
 981                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
 982                 if (addspeed > 0)
 983                 {
 984                         accelspeed = min(cl.movevars_accelerate * s->q.frametime * wishspeed, addspeed);
 985                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
 986                 }
 987                 s->velocity[2] -= cl_gravity.value * s->q.frametime;
 988                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
 989                         s->velocity[2] = 0;
 990                 if (VectorLength2(s->velocity))
 991                         CL_ClientMovement_Move(s);
 992         }
 993         else
 994         {
 995                 if (s->waterjumptime <= 0)
 996                 {
 997                         vec_t f;
 998                         vec_t vel_straight;
 999                         vec_t vel_z;
1000                         vec3_t vel_perpend;
1001
1002                         // apply air speed limit
1003                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1004
1005                         /*
1006                         addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1007                         if (addspeed > 0)
1008                         {
1009                                 accelspeed = min(cl.movevars_accelerate * s->q.frametime * wishspeed, addspeed);
1010                                 VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1011                         }
1012                         */
1013
1014                         vel_straight = DotProduct(s->velocity, wishdir);
1015                         vel_z = s->velocity[2];
1016                         VectorMA(s->velocity, -vel_straight, wishdir, vel_perpend);
1017                         vel_perpend[2] -= vel_z;
1018
1019                         f = wishspeed - vel_straight;
1020                         if(f > 0)
1021                                 vel_straight += min(f, cl.movevars_accelerate * s->q.frametime * wishspeed) * cl.movevars_airaccel_qw;
1022                         if(wishspeed > 0)
1023                                 vel_straight += min(wishspeed, cl.movevars_accelerate * s->q.frametime * wishspeed) * (1 - cl.movevars_airaccel_qw);
1024
1025                         VectorM(1 - (s->q.frametime * (wishspeed / cl.movevars_maxairspeed) * cl.movevars_airaccel_sideways_friction), vel_perpend, vel_perpend);
1026
1027                         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1028                         s->velocity[2] += vel_z;
1029                 }
1030                 s->velocity[2] -= cl_gravity.value * s->q.frametime;
1031                 CL_ClientMovement_Move(s);
1032         }
1033 }
1034
1035 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1036 {
1037         //Con_Printf(" %f", frametime);
1038         if (!s->q.jump)
1039                 s->q.canjump = true;
1040         s->waterjumptime -= s->q.frametime;
1041         CL_ClientMovement_UpdateStatus(s);
1042         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1043                 CL_ClientMovement_Physics_Swim(s);
1044         else
1045                 CL_ClientMovement_Physics_Walk(s);
1046 }
1047
1048 extern cvar_t slowmo;
1049 void CL_UpdateMoveVars(void)
1050 {
1051         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1052                 cl.movevars_ticrate = 1.0 / bound(1, cl_netinputpacketspersecond.value, 100);
1053         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1054         {
1055                 cl.movevars_ticrate = cl.statsf[STAT_MOVEVARS_TICRATE];
1056                 cl.movevars_slowmo = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1057                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1058                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1059                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1060                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1061                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1062                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1063                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1064                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1065                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1066                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1067                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1068                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1069                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1070                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1071         }
1072         else
1073         {
1074                 cl.movevars_ticrate = 1.0 / bound(1, cl_netinputpacketspersecond.value, 100);
1075                 cl.movevars_slowmo = slowmo.value;
1076                 cl.movevars_gravity = sv_gravity.value;
1077                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1078                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1079                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1080                 cl.movevars_accelerate = cl_movement_accelerate.value;
1081                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1082                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1083                 cl.movevars_friction = cl_movement_friction.value;
1084                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1085                 cl.movevars_entgravity = 1;
1086                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1087                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1088                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1089                 cl.movevars_stepheight = cl_movement_stepheight.value;
1090                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1091                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1092         }
1093 }
1094
1095 void CL_ClientMovement_Replay(void)
1096 {
1097         int i;
1098         qboolean canjump;
1099         double totalmovetime;
1100         cl_clientmovement_state_t s;
1101
1102         CL_ClientMovement_ExpireOldMoves();
1103
1104         // set up starting state for the series of moves
1105         memset(&s, 0, sizeof(s));
1106         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1107         VectorCopy(cl.mvelocity[0], s.velocity);
1108         s.crouched = true; // will be updated on first move
1109         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1110
1111         totalmovetime = 0;
1112         for (i = 0;i < cl.movement_numqueue - 1;i++)
1113                 totalmovetime += cl.movement_queue[i].frametime;
1114         cl.movement_predicted = totalmovetime * 1000.0 >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1115         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovetime * 1000.0, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1116         if (cl.movement_predicted)
1117         {
1118                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1119
1120                 // replay the input queue to predict current location
1121                 // note: this relies on the fact there's always one queue item at the end
1122
1123                 canjump = cl.movement_replay_canjump;
1124                 for (i = 0;i < cl.movement_numqueue;i++)
1125                 {
1126                         s.q = cl.movement_queue[i];
1127                         s.q.canjump = canjump;
1128                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1129                         if (s.q.frametime > 0.05)
1130                         {
1131                                 s.q.frametime *= 0.5;
1132                                 CL_ClientMovement_PlayerMove(&s);
1133                         }
1134                         CL_ClientMovement_PlayerMove(&s);
1135                         canjump = cl.movement_queue[i].canjump = s.q.canjump;
1136                 }
1137         }
1138         else
1139         {
1140                 // get the first movement queue entry to know whether to crouch and such
1141                 s.q = cl.movement_queue[0];
1142         }
1143         CL_ClientMovement_UpdateStatus(&s);
1144
1145         if (cl.movement_replay)
1146         {
1147                 cl.movement_replay = false;
1148                 // update interpolation timestamps if time has passed
1149                 if (cl.movement_time[0] != cl.movecmd[0].time)
1150                 {
1151                         cl.movement_time[1] = cl.movement_time[0];
1152                         cl.movement_time[0] = cl.movecmd[0].time;
1153                         cl.movement_time[2] = cl.time;
1154                         VectorCopy(cl.movement_origin, cl.movement_oldorigin);
1155                         //VectorCopy(s.origin, cl.entities[cl.playerentity].state_current.origin);
1156                         //VectorSet(cl.entities[cl.playerentity].state_current.angles, 0, cl.viewangles[1], 0);
1157                 }
1158
1159                 // update the interpolation target position and velocity
1160                 VectorCopy(s.origin, cl.movement_origin);
1161                 VectorCopy(s.velocity, cl.movement_velocity);
1162         }
1163
1164         // update the onground flag if appropriate
1165         if (cl.movement_predicted)
1166         {
1167                 // when predicted we simply set the flag according to the UpdateStatus
1168                 cl.onground = s.onground;
1169         }
1170         else
1171         {
1172                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1173                 // an update packet is received, but can be forced on here to hide
1174                 // server inconsistencies in the onground flag
1175                 // (which mostly occur when stepping up stairs at very high framerates
1176                 //  where after the step up the move continues forward and not
1177                 //  downward so the ground is not detected)
1178                 //
1179                 // such onground inconsistencies can cause jittery gun bobbing and
1180                 // stair smoothing, so we set onground if UpdateStatus says so
1181                 if (s.onground)
1182                         cl.onground = true;
1183         }
1184
1185         // react to onground state changes (for gun bob)
1186         if (cl.onground)
1187         {
1188                 if (!cl.oldonground)
1189                         cl.hitgroundtime = cl.movecmd[0].time;
1190                 cl.lastongroundtime = cl.movecmd[0].time;
1191         }
1192         cl.oldonground = cl.onground;
1193 }
1194
1195 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1196 {
1197         int bits;
1198
1199         bits = 0;
1200         if (to->viewangles[0] != from->viewangles[0])
1201                 bits |= QW_CM_ANGLE1;
1202         if (to->viewangles[1] != from->viewangles[1])
1203                 bits |= QW_CM_ANGLE2;
1204         if (to->viewangles[2] != from->viewangles[2])
1205                 bits |= QW_CM_ANGLE3;
1206         if (to->forwardmove != from->forwardmove)
1207                 bits |= QW_CM_FORWARD;
1208         if (to->sidemove != from->sidemove)
1209                 bits |= QW_CM_SIDE;
1210         if (to->upmove != from->upmove)
1211                 bits |= QW_CM_UP;
1212         if (to->buttons != from->buttons)
1213                 bits |= QW_CM_BUTTONS;
1214         if (to->impulse != from->impulse)
1215                 bits |= QW_CM_IMPULSE;
1216
1217         MSG_WriteByte(buf, bits);
1218         if (bits & QW_CM_ANGLE1)
1219                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1220         if (bits & QW_CM_ANGLE2)
1221                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1222         if (bits & QW_CM_ANGLE3)
1223                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1224         if (bits & QW_CM_FORWARD)
1225                 MSG_WriteShort(buf, to->forwardmove);
1226         if (bits & QW_CM_SIDE)
1227                 MSG_WriteShort(buf, to->sidemove);
1228         if (bits & QW_CM_UP)
1229                 MSG_WriteShort(buf, to->upmove);
1230         if (bits & QW_CM_BUTTONS)
1231                 MSG_WriteByte(buf, to->buttons);
1232         if (bits & QW_CM_IMPULSE)
1233                 MSG_WriteByte(buf, to->impulse);
1234         MSG_WriteByte(buf, to->msec);
1235 }
1236
1237 /*
1238 ==============
1239 CL_SendMove
1240 ==============
1241 */
1242 usercmd_t nullcmd; // for delta compression of qw moves
1243 void CL_SendMove(void)
1244 {
1245         int i, j, packetloss;
1246         int bits;
1247         sizebuf_t buf;
1248         unsigned char data[1024];
1249         static double lastsendtime = 0;
1250         double packettime;
1251         int msecdelta;
1252
1253         CL_ClientMovement_ExpireOldMoves();
1254
1255         // if playing a demo, do nothing
1256         if (!cls.netcon)
1257                 return;
1258
1259         // don't send too often or else network connections can get clogged by a high renderer framerate
1260         packettime = cl.movevars_ticrate;
1261         // quakeworld servers take only frametimes
1262         // predicted dp7 servers take current interpolation time
1263         // unpredicted servers take an echo of the latest server timestamp
1264         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1265         {
1266                 if (realtime < lastsendtime + packettime)
1267                         return;
1268                 cl.cmd.time = realtime;
1269                 cl.cmd.sequence = cls.netcon->qw.outgoing_sequence;
1270         }
1271         else if (cl.movement_predicted)
1272         {
1273                 if (realtime < lastsendtime + packettime)
1274                         return;
1275                 cl.cmd.time = cl.time;
1276                 cl.cmd.sequence = cls.movesequence;
1277         }
1278         else
1279         {
1280                 // unpredicted movement should be sent immediately whenever a server
1281                 // packet is received, to minimize ping times
1282                 if (!cl.movement_needupdate && realtime < lastsendtime + packettime)
1283                         return;
1284                 if (cl.mtime[0] == cl.movecmd[0].time && cl.mtime[1] != cl.mtime[0])
1285                         return;
1286                 cl.cmd.time = cl.mtime[0];
1287                 cl.cmd.sequence = cls.movesequence;
1288         }
1289
1290         // don't let it fall behind if CL_SendMove hasn't been called recently
1291         // (such is the case when framerate is too low for instance)
1292         lastsendtime = bound(realtime, lastsendtime + packettime, realtime + packettime);
1293         // set the flag indicating that we sent a packet recently
1294         cl.movement_needupdate = false;
1295
1296         buf.maxsize = sizeof(data);
1297         buf.cursize = 0;
1298         buf.data = data;
1299
1300         // conditions for sending a move:
1301         // if the move advances time or if the game is paused (in which case time
1302         // is not advancing)
1303         // don't send a new input packet if the connection is still saturated from
1304         // the last one (or chat messages, etc)
1305         // note: this behavior comes from QW
1306         if ((cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS) && !NetConn_CanSend(cls.netcon))
1307                 return;
1308
1309         // increase the move counter since we intend to send a move
1310         cls.movesequence++;
1311
1312         // send the movement message
1313         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1314         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1315         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1316         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1317         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1318         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1319         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1320         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1321         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1322         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1323         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1324
1325         // set prydon cursor info
1326         CL_UpdatePrydonCursor();
1327
1328         // set button bits
1329         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1330         bits = 0;
1331         if (in_attack.state   & 3) bits |=   1;in_attack.state  &= ~2;
1332         if (in_jump.state     & 3) bits |=   2;in_jump.state    &= ~2;
1333         if (in_button3.state  & 3) bits |=   4;in_button3.state &= ~2;
1334         if (in_button4.state  & 3) bits |=   8;in_button4.state &= ~2;
1335         if (in_button5.state  & 3) bits |=  16;in_button5.state &= ~2;
1336         if (in_button6.state  & 3) bits |=  32;in_button6.state &= ~2;
1337         if (in_button7.state  & 3) bits |=  64;in_button7.state &= ~2;
1338         if (in_button8.state  & 3) bits |= 128;in_button8.state &= ~2;
1339         if (in_use.state      & 3) bits |= 256;in_use.state     &= ~2;
1340         if (key_dest != key_game || key_consoleactive) bits |= 512;
1341         if (cl_prydoncursor.integer) bits |= 1024;
1342         if (in_button9.state  & 3)  bits |=   2048;in_button9.state  &= ~2;
1343         if (in_button10.state  & 3) bits |=   4096;in_button10.state &= ~2;
1344         if (in_button11.state  & 3) bits |=   8192;in_button11.state &= ~2;
1345         if (in_button12.state  & 3) bits |=  16384;in_button12.state &= ~2;
1346         if (in_button13.state  & 3) bits |=  32768;in_button13.state &= ~2;
1347         if (in_button14.state  & 3) bits |=  65536;in_button14.state &= ~2;
1348         if (in_button15.state  & 3) bits |= 131072;in_button15.state &= ~2;
1349         if (in_button16.state  & 3) bits |= 262144;in_button16.state &= ~2;
1350         // button bits 19-31 unused currently
1351         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1352         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1353         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1354         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1355         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1356         cl.cmd.buttons = bits;
1357
1358         // set impulse
1359         cl.cmd.impulse = in_impulse;
1360         in_impulse = 0;
1361
1362         // movement is set by input code (forwardmove/sidemove/upmove)
1363
1364         // set viewangles
1365         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1366
1367         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[0].time * 1000));
1368         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1369         // ridiculous value rejection (matches qw)
1370         if (cl.cmd.msec > 250)
1371                 cl.cmd.msec = 100;
1372
1373         cl.cmd.predicted = cl_movement.integer;
1374
1375         // always dump the first two messages, because they may contain leftover inputs from the last level
1376         if (cl.cmd.sequence <= 2)
1377                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1378
1379         // update the cl.movecmd array which holds the most recent moves
1380         for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
1381                 cl.movecmd[i] = cl.movecmd[i-1];
1382         cl.movecmd[0] = cl.cmd;
1383
1384         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1385         {
1386                 int checksumindex;
1387
1388                 CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
1389
1390                 MSG_WriteByte(&buf, qw_clc_move);
1391                 // save the position for a checksum byte
1392                 checksumindex = buf.cursize;
1393                 MSG_WriteByte(&buf, 0);
1394                 // packet loss percentage
1395                 for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1396                         if (cls.netcon->incoming_unreliablesize[j] == NETGRAPH_LOSTPACKET)
1397                                 packetloss++;
1398                 packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1399                 MSG_WriteByte(&buf, packetloss);
1400                 // write most recent 3 moves
1401                 QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1402                 QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1403                 QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.movecmd[0]);
1404                 // calculate the checksum
1405                 buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->qw.outgoing_sequence);
1406                 // if delta compression history overflows, request no delta
1407                 if (cls.netcon->qw.outgoing_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1408                         cl.qw_validsequence = 0;
1409                 // request delta compression if appropriate
1410                 if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1411                 {
1412                         cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1413                         MSG_WriteByte(&buf, qw_clc_delta);
1414                         MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1415                 }
1416                 else
1417                         cl.qw_deltasequence[cls.netcon->qw.outgoing_sequence & QW_UPDATE_MASK] = -1;
1418         }
1419         else if (cls.signon == SIGNONS)
1420         {
1421                 if (cls.protocol == PROTOCOL_QUAKE || cls.protocol == PROTOCOL_QUAKEDP || cls.protocol == PROTOCOL_NEHAHRAMOVIE)
1422                 {
1423                         // 5 bytes
1424                         MSG_WriteByte (&buf, clc_move);
1425                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1426                         // 3 bytes
1427                         for (i = 0;i < 3;i++)
1428                                 MSG_WriteAngle8i (&buf, cl.movecmd[0].viewangles[i]);
1429                         // 6 bytes
1430                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1431                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1432                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1433                         // 2 bytes
1434                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1435                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1436                 }
1437                 else if (cls.protocol == PROTOCOL_DARKPLACES2 || cls.protocol == PROTOCOL_DARKPLACES3)
1438                 {
1439                         // 5 bytes
1440                         MSG_WriteByte (&buf, clc_move);
1441                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1442                         // 12 bytes
1443                         for (i = 0;i < 3;i++)
1444                                 MSG_WriteAngle32f (&buf, cl.movecmd[0].viewangles[i]);
1445                         // 6 bytes
1446                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1447                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1448                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1449                         // 2 bytes
1450                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1451                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1452                 }
1453                 else if (cls.protocol == PROTOCOL_DARKPLACES1 || cls.protocol == PROTOCOL_DARKPLACES4 || cls.protocol == PROTOCOL_DARKPLACES5)
1454                 {
1455                         // 5 bytes
1456                         MSG_WriteByte (&buf, clc_move);
1457                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1458                         // 6 bytes
1459                         for (i = 0;i < 3;i++)
1460                                 MSG_WriteAngle16i (&buf, cl.movecmd[0].viewangles[i]);
1461                         // 6 bytes
1462                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1463                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1464                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1465                         // 2 bytes
1466                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1467                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1468                 }
1469                 else if (cls.signon == SIGNONS)
1470                 {
1471                         int maxusercmds;
1472                         usercmd_t *cmd;
1473
1474                         // FIXME: cl.movecmd[0].buttons & 16 is +button5, Nexuiz specific
1475                         CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, (cl.movecmd[0].buttons & 16) != 0);
1476
1477                         // set the maxusercmds variable to limit how many should be sent
1478                         maxusercmds = bound(1, cl_netinputpacketlosstolerance.integer + 1, CL_MAX_USERCMDS);
1479                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1480                         if (!cl.cmd.predicted)
1481                                 maxusercmds = 1;
1482
1483                         // send the latest moves in order, the old ones will be
1484                         // ignored by the server harmlessly, however if the previous
1485                         // packets were lost these moves will be used
1486                         //
1487                         // this reduces packet loss impact on gameplay.
1488                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1489                         {
1490                                 // don't repeat any stale moves
1491                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1492                                         continue;
1493                                 // 5/9 bytes
1494                                 MSG_WriteByte (&buf, clc_move);
1495                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1496                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1497                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1498                                 // 6 bytes
1499                                 for (i = 0;i < 3;i++)
1500                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1501                                 // 6 bytes
1502                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1503                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1504                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1505                                 // 5 bytes
1506                                 MSG_WriteLong (&buf, cmd->buttons);
1507                                 MSG_WriteByte (&buf, cmd->impulse);
1508                                 // PRYDON_CLIENTCURSOR
1509                                 // 30 bytes
1510                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1511                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1512                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1513                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1514                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1515                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1516                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1517                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1518                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1519                         }
1520                 }
1521         }
1522
1523         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
1524         {
1525                 // ack the last few frame numbers
1526                 // (redundent to improve handling of client->server packet loss)
1527                 // for LATESTFRAMENUMS == 3 case this is 15 bytes
1528                 for (i = 0;i < LATESTFRAMENUMS;i++)
1529                 {
1530                         if (cl.latestframenums[i] > 0)
1531                         {
1532                                 if (developer_networkentities.integer >= 10)
1533                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
1534                                 MSG_WriteByte(&buf, clc_ackframe);
1535                                 MSG_WriteLong(&buf, cl.latestframenums[i]);
1536                         }
1537                 }
1538         }
1539
1540         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1541         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1542
1543         // acknowledge any recently received data blocks
1544         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
1545         {
1546                 MSG_WriteByte(&buf, clc_ackdownloaddata);
1547                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
1548                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
1549                 cls.dp_downloadack[i].start = 0;
1550                 cls.dp_downloadack[i].size = 0;
1551         }
1552
1553         // send the reliable message (forwarded commands) if there is one
1554         if (buf.cursize || cls.netcon->message.cursize)
1555                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer));
1556
1557         if (cls.netcon->message.overflowed)
1558         {
1559                 Con_Print("CL_SendMove: lost server connection\n");
1560                 CL_Disconnect();
1561                 Host_ShutdownServer();
1562         }
1563 }
1564
1565 /*
1566 ============
1567 CL_InitInput
1568 ============
1569 */
1570 void CL_InitInput (void)
1571 {
1572         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
1573         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
1574         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
1575         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
1576         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
1577         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
1578         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
1579         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
1580         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
1581         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
1582         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
1583         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
1584         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
1585         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
1586         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
1587         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
1588         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
1589         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
1590         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
1591         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
1592         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
1593         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
1594         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
1595         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
1596         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
1597         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
1598         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
1599         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
1600         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
1601         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
1602         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
1603         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
1604         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
1605
1606         // LordHavoc: added use button
1607         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
1608         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
1609
1610         // LordHavoc: added 6 new buttons
1611         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
1612         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
1613         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
1614         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
1615         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
1616         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
1617         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
1618         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
1619         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
1620         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
1621         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
1622         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
1623         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
1624         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
1625         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
1626         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
1627         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
1628         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
1629         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
1630         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
1631         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
1632         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
1633         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
1634         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
1635         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
1636         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
1637         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
1638         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
1639
1640         // LordHavoc: added bestweapon command
1641         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
1642
1643         Cvar_RegisterVariable(&cl_movement);
1644         Cvar_RegisterVariable(&cl_movement_minping);
1645         Cvar_RegisterVariable(&cl_movement_maxspeed);
1646         Cvar_RegisterVariable(&cl_movement_maxairspeed);
1647         Cvar_RegisterVariable(&cl_movement_stopspeed);
1648         Cvar_RegisterVariable(&cl_movement_friction);
1649         Cvar_RegisterVariable(&cl_movement_edgefriction);
1650         Cvar_RegisterVariable(&cl_movement_stepheight);
1651         Cvar_RegisterVariable(&cl_movement_airaccelerate);
1652         Cvar_RegisterVariable(&cl_movement_accelerate);
1653         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
1654         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
1655         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
1656         Cvar_RegisterVariable(&cl_gravity);
1657         Cvar_RegisterVariable(&cl_slowmo);
1658
1659         Cvar_RegisterVariable(&in_pitch_min);
1660         Cvar_RegisterVariable(&in_pitch_max);
1661         Cvar_RegisterVariable(&m_filter);
1662
1663         Cvar_RegisterVariable(&cl_netinputpacketspersecond);
1664         Cvar_RegisterVariable(&cl_netinputpacketlosstolerance);
1665
1666         Cvar_RegisterVariable(&cl_nodelta);
1667 }
1668