# Uncrustify 0.60 # # General options # # The type of line endings # WARNING: Best is not unique (auto lf) newlines = auto # auto/lf/crlf/cr # The original size of tabs in the input input_tab_size = 4 # number # The size of tabs in the output (only used if align_with_tabs=true) output_tab_size = 4 # number # The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn) string_escape_char = 92 # number #ignore # Alternate string escape char for Pawn. Only works right before the quote char. string_escape_char2 = 0 # number #ignore # Allow interpreting '>=' and '>>=' as part of a template in 'void f(list>=val);'. # If true (default), 'assert(x<0 && y>=3)' will be broken. # Improvements to template detection may make this option obsolete. # WARNING: Code doesn't seem to use this feature - delete from the config? tok_split_gte = false # false/true # Control what to do with the UTF-8 BOM (recommend 'remove') utf8_bom = remove # ignore/add/remove/force #force # If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8 utf8_byte = true # false/true #force # Force the output encoding to UTF-8 utf8_force = true # false/true #force # # Indenting # # The number of columns to indent per level. # Usually 2, 3, 4, or 8. indent_columns = 4 # number # The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents. # For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level indent_continue = indent_columns # number # How to use tabs when indenting code # 0=spaces only # 1=indent with tabs to brace level, align with spaces # 2=indent and align with tabs, using spaces when not on a tabstop indent_with_tabs = 1 # number #force # Comments that are not a brace level are indented with tabs on a tabstop. # Requires indent_with_tabs=2. If false, will use spaces. indent_cmt_with_tabs = false # false/true # Whether to indent strings broken by '\' so that they line up # WARNING: Code doesn't seem to use this feature - delete from the config? indent_align_string = false # false/true # The number of spaces to indent multi-line XML strings. # Requires indent_align_string=True # WARNING: Code doesn't seem to use this feature - delete from the config? indent_xml_string = 0 # number # Spaces to indent '{' from level indent_brace = 0 # number # Whether braces are indented to the body level indent_braces = false # false/true # Disabled indenting function braces if indent_braces is true # WARNING: Code doesn't seem to use this feature - delete from the config? indent_braces_no_func = false # false/true # Disabled indenting class braces if indent_braces is true # WARNING: Code doesn't seem to use this feature - delete from the config? indent_braces_no_class = false # false/true # Disabled indenting struct braces if indent_braces is true # WARNING: Code doesn't seem to use this feature - delete from the config? indent_braces_no_struct = false # false/true # Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc. indent_brace_parent = false # false/true # Whether the 'namespace' body is indented # WARNING: Code doesn't seem to use this feature - delete from the config? indent_namespace = false # false/true # The number of spaces to indent a namespace block # WARNING: Code doesn't seem to use this feature - delete from the config? indent_namespace_level = 0 # number # If the body of the namespace is longer than this number, it won't be indented. # Requires indent_namespace=true. Default=0 (no limit) # WARNING: Code doesn't seem to use this feature - delete from the config? indent_namespace_limit = 0 # number # Whether the 'extern "C"' body is indented # WARNING: Code doesn't seem to use this feature - delete from the config? indent_extern = false # false/true # Whether the 'class' body is indented # WARNING: Code doesn't seem to use this feature - delete from the config? indent_class = false # false/true # Whether to indent the stuff after a leading class colon # WARNING: Code doesn't seem to use this feature - delete from the config? indent_class_colon = false # false/true # Virtual indent from the ':' for member initializers. Default is 2 # WARNING: Code doesn't seem to use this feature - delete from the config? indent_ctor_init_leading = 0 # number # Additional indenting for constructor initializer list # WARNING: Code doesn't seem to use this feature - delete from the config? indent_ctor_init = 0 # number # False=treat 'else\nif' as 'else if' for indenting purposes # True=indent the 'if' one level indent_else_if = true # false/true # Amount to indent variable declarations after a open brace. neg=relative, pos=absolute indent_var_def_blk = 0 # number # Indent continued variable declarations instead of aligning. # WARNING: Code doesn't seem to use this feature - delete from the config? indent_var_def_cont = false # false/true # True: force indentation of function definition to start in column 1 # False: use the default behavior indent_func_def_force_col1 = false # false/true # True: indent continued function call parameters one indent level # False: align parameters under the open paren indent_func_call_param = true # false/true # Same as indent_func_call_param, but for function defs indent_func_def_param = true # false/true # Same as indent_func_call_param, but for function protos indent_func_proto_param = true # false/true # Same as indent_func_call_param, but for class declarations # WARNING: Code doesn't seem to use this feature - delete from the config? indent_func_class_param = false # false/true # Same as indent_func_call_param, but for class variable constructors # WARNING: Code doesn't seem to use this feature - delete from the config? indent_func_ctor_var_param = false # false/true # Same as indent_func_call_param, but for templates # WARNING: Code doesn't seem to use this feature - delete from the config? indent_template_param = false # false/true # Double the indent for indent_func_xxx_param options indent_func_param_double = false # false/true # Indentation column for standalone 'const' function decl/proto qualifier # WARNING: Code doesn't seem to use this feature - delete from the config? indent_func_const = 0 # number # Indentation column for standalone 'throw' function decl/proto qualifier # WARNING: Code doesn't seem to use this feature - delete from the config? indent_func_throw = 0 # number # The number of spaces to indent a continued '->' or '.' # Usually set to 0, 1, or indent_columns. indent_member = 0 # number # Spaces to indent single line ('//') comments on lines before code indent_sing_line_comments = 0 # number # If set, will indent trailing single line ('//') comments relative # to the code instead of trying to keep the same absolute column indent_relative_single_line_comments = true # false/true #force # Spaces to indent 'case' from 'switch' # Usually 0 or indent_columns. indent_switch_case = indent_columns # number # Spaces to shift the 'case' line, without affecting any other lines # Usually 0. indent_case_shift = 0 # number # Spaces to indent '{' from 'case'. # By default, the brace will appear under the 'c' in case. # Usually set to 0 or indent_columns. indent_case_brace = 0 # number # Whether to indent comments found in first column indent_col1_comment = false # false/true # How to indent goto labels # >0 : absolute column where 1 is the leftmost column # <=0 : subtract from brace indent # WARNING: Code doesn't seem to use this feature - delete from the config? indent_label = 0 # number # Same as indent_label, but for access specifiers that are followed by a colon # WARNING: Code doesn't seem to use this feature - delete from the config? indent_access_spec = 0 # number # Indent the code after an access specifier by one level. # If set, this option forces 'indent_access_spec=0' # WARNING: Code doesn't seem to use this feature - delete from the config? indent_access_spec_body = false # false/true # If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended) # WARNING: Code doesn't seem to use this feature - delete from the config? indent_paren_nl = false # false/true # Controls the indent of a close paren after a newline. # 0: Indent to body level # 1: Align under the open paren # 2: Indent to the brace level indent_paren_close = 1 # number #force # Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren # WARNING: Code doesn't seem to use this feature - delete from the config? indent_comma_paren = false # false/true # Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren # WARNING: Code doesn't seem to use this feature - delete from the config? indent_bool_paren = false # false/true # If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones # WARNING: Code doesn't seem to use this feature - delete from the config? indent_first_bool_expr = false # false/true # If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended) # WARNING: Code doesn't seem to use this feature - delete from the config? indent_square_nl = false # false/true # Don't change the relative indent of ESQL/C 'EXEC SQL' bodies # WARNING: Code doesn't seem to use this feature - delete from the config? indent_preserve_sql = false # false/true # Align continued statements at the '='. Default=True # If FALSE or the '=' is followed by a newline, the next line is indent one tab. # WARNING: Code doesn't seem to use this feature - delete from the config? indent_align_assign = false # false/true # Indent OC blocks at brace level instead of usual rules. indent_oc_block = false # false/true #ignore # Indent OC blocks in a message relative to the parameter name. # 0=use indent_oc_block rules, 1+=spaces to indent #ignore indent_oc_block_msg = 0 # number #ignore # Minimum indent for subsequent parameters indent_oc_msg_colon = 0 # number #ignore # # Spacing options # # Add or remove space around arithmetic operator '+', '-', '/', '*', etc sp_arith = ignore # ignore/add/remove/force #force # Add or remove space around assignment operator '=', '+=', etc # NOTE: is 44 worse than ignore sp_assign = add # ignore/add/remove/force # Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign # WARNING: Code doesn't seem to use this feature - delete from the config? sp_cpp_lambda_assign = ignore # ignore/add/remove/force # Add or remove space after the capture specification in C++11 lambda. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_cpp_lambda_paren = ignore # ignore/add/remove/force # Add or remove space around assignment operator '=' in a prototype # WARNING: Code doesn't seem to use this feature - delete from the config? sp_assign_default = ignore # ignore/add/remove/force # Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign. sp_before_assign = ignore # ignore/add/remove/force #force # Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign. sp_after_assign = ignore # ignore/add/remove/force #force # Add or remove space around assignment '=' in enum # WARNING: Code doesn't seem to use this feature - delete from the config? sp_enum_assign = ignore # ignore/add/remove/force # Add or remove space before assignment '=' in enum. Overrides sp_enum_assign. sp_enum_before_assign = ignore # ignore/add/remove/force #force # Add or remove space after assignment '=' in enum. Overrides sp_enum_assign. sp_enum_after_assign = ignore # ignore/add/remove/force #force # Add or remove space around preprocessor '##' concatenation operator. Default=Add # NOTE: is 4 worse than ignore sp_pp_concat = remove # ignore/add/remove/force # Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. sp_pp_stringify = remove # ignore/add/remove/force # Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'. sp_before_pp_stringify = add # ignore/add/remove/force # Add or remove space around boolean operators '&&' and '||' # NOTE: is 2 worse than ignore sp_bool = add # ignore/add/remove/force # Add or remove space around compare operator '<', '>', '==', etc # NOTE: is 196 worse than ignore sp_compare = add # ignore/add/remove/force # Add or remove space inside '(' and ')' # NOTE: is 10 worse than ignore sp_inside_paren = remove # ignore/add/remove/force # Add or remove space between nested parens # NOTE: is 14 worse than ignore sp_paren_paren = remove # ignore/add/remove/force # Whether to balance spaces inside nested parens sp_balance_nested_parens = false # false/true # Add or remove space between ')' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_paren_brace = ignore # ignore/add/remove/force # Add or remove space before pointer star '*' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_ptr_star = ignore # ignore/add/remove/force # Add or remove space before pointer star '*' that isn't followed by a variable name # If set to 'ignore', sp_before_ptr_star is used instead. sp_before_unnamed_ptr_star = add # ignore/add/remove/force # Add or remove space between pointer stars '*' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_between_ptr_star = ignore # ignore/add/remove/force # Add or remove space after pointer star '*', if followed by a word. sp_after_ptr_star = add # ignore/add/remove/force # Add or remove space after a pointer star '*', if followed by a func proto/def. sp_after_ptr_star_func = add # ignore/add/remove/force # Add or remove space after a pointer star '*', if followed by an open paren (function types). # WARNING: Code doesn't seem to use this feature - delete from the config? sp_ptr_star_paren = ignore # ignore/add/remove/force # Add or remove space before a pointer star '*', if followed by a func proto/def. sp_before_ptr_star_func = add # ignore/add/remove/force # Add or remove space before a reference sign '&' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_byref = ignore # ignore/add/remove/force # Add or remove space before a reference sign '&' that isn't followed by a variable name # If set to 'ignore', sp_before_byref is used instead. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_unnamed_byref = ignore # ignore/add/remove/force # Add or remove space after reference sign '&', if followed by a word. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_byref = ignore # ignore/add/remove/force # Add or remove space after a reference sign '&', if followed by a func proto/def. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_byref_func = ignore # ignore/add/remove/force # Add or remove space before a reference sign '&', if followed by a func proto/def. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_byref_func = ignore # ignore/add/remove/force # Add or remove space between type and word. Default=Force sp_after_type = add # ignore/add/remove/force # Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_template_paren = ignore # ignore/add/remove/force # Add or remove space in 'template <' vs 'template<'. # If set to ignore, sp_before_angle is used. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_template_angle = ignore # ignore/add/remove/force # Add or remove space before '<>' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_angle = ignore # ignore/add/remove/force # Add or remove space inside '<' and '>' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_inside_angle = ignore # ignore/add/remove/force # Add or remove space after '<>' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_angle = ignore # ignore/add/remove/force # Add or remove space between '<>' and '(' as found in 'new List();' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_angle_paren = ignore # ignore/add/remove/force # Add or remove space between '<>' and a word as in 'List m;' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_angle_word = ignore # ignore/add/remove/force # Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add # WARNING: Code doesn't seem to use this feature - delete from the config? sp_angle_shift = ignore # ignore/add/remove/force # Permit removal of the space between '>>' in 'foo >' (C++11 only). Default=False # sp_angle_shift cannot remove the space without this option. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_permit_cpp11_shift = false # false/true # Add or remove space before '(' of 'if', 'for', 'switch', and 'while' sp_before_sparen = remove # ignore/add/remove/force #force # Add or remove space inside if-condition '(' and ')' # NOTE: is 42 worse than ignore sp_inside_sparen = remove # ignore/add/remove/force # Add or remove space before if-condition ')'. Overrides sp_inside_sparen. sp_inside_sparen_close = ignore # ignore/add/remove/force #force # Add or remove space before if-condition '('. Overrides sp_inside_sparen. sp_inside_sparen_open = ignore # ignore/add/remove/force #force # Add or remove space after ')' of 'if', 'for', 'switch', and 'while' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_sparen = ignore # ignore/add/remove/force # Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while' sp_sparen_brace = add # ignore/add/remove/force # Add or remove space between 'invariant' and '(' in the D language. sp_invariant_paren = ignore # ignore/add/remove/force #ignore # Add or remove space after the ')' in 'invariant (C) c' in the D language. sp_after_invariant_paren = ignore # ignore/add/remove/force #ignore # Add or remove space before empty statement ';' on 'if', 'for' and 'while' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_special_semi = ignore # ignore/add/remove/force # Add or remove space before ';'. Default=Remove # NOTE: is 2 worse than ignore sp_before_semi = remove # ignore/add/remove/force # Add or remove space before ';' in non-empty 'for' statements sp_before_semi_for = remove # ignore/add/remove/force # Add or remove space before a semicolon of an empty part of a for statement. sp_before_semi_for_empty = add # ignore/add/remove/force # Add or remove space after ';', except when followed by a comment. Default=Add # NOTE: is 56 worse than ignore sp_after_semi = add # ignore/add/remove/force # Add or remove space after ';' in non-empty 'for' statements. Default=Force sp_after_semi_for = add # ignore/add/remove/force # Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; ). sp_after_semi_for_empty = add # ignore/add/remove/force # Add or remove space before '[' (except '[]') sp_before_square = remove # ignore/add/remove/force # Add or remove space before '[]' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_squares = ignore # ignore/add/remove/force # Add or remove space inside a non-empty '[' and ']' sp_inside_square = remove # ignore/add/remove/force # Add or remove space after ',' # NOTE: is 742 worse than ignore sp_after_comma = add # ignore/add/remove/force # Add or remove space before ',' # NOTE: is 58 worse than ignore sp_before_comma = remove # ignore/add/remove/force # Add or remove space between an open paren and comma: '(,' vs '( ,' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_paren_comma = ignore # ignore/add/remove/force # Add or remove space before the variadic '...' when preceded by a non-punctuator # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_ellipsis = ignore # ignore/add/remove/force # Add or remove space after class ':' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_class_colon = ignore # ignore/add/remove/force # Add or remove space before class ':' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_class_colon = ignore # ignore/add/remove/force # Add or remove space before case ':'. Default=Remove sp_before_case_colon = remove # ignore/add/remove/force # Add or remove space between 'operator' and operator sign # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_operator = ignore # ignore/add/remove/force # Add or remove space between the operator symbol and the open paren, as in 'operator ++(' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_operator_sym = ignore # ignore/add/remove/force # Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_cast = ignore # ignore/add/remove/force # Add or remove spaces inside cast parens sp_inside_paren_cast = remove # ignore/add/remove/force # Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)' sp_cpp_cast_paren = remove # ignore/add/remove/force # Add or remove space between 'sizeof' and '(' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_sizeof_paren = ignore # ignore/add/remove/force # Add or remove space after the tag keyword (Pawn) sp_after_tag = ignore # ignore/add/remove/force #ignore # Add or remove space inside enum '{' and '}' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_inside_braces_enum = ignore # ignore/add/remove/force # Add or remove space inside struct/union '{' and '}' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_inside_braces_struct = ignore # ignore/add/remove/force # Add or remove space inside '{' and '}' sp_inside_braces = add # ignore/add/remove/force # Add or remove space inside '{}' # NOTE: is 10 worse than ignore sp_inside_braces_empty = remove # ignore/add/remove/force # Add or remove space between return type and function name # A minimum of 1 is forced except for pointer return types. sp_type_func = add # ignore/add/remove/force # Add or remove space between function name and '(' on function declaration # NOTE: is 30 worse than ignore sp_func_proto_paren = remove # ignore/add/remove/force # Add or remove space between function name and '(' on function definition # NOTE: is 400 worse than ignore sp_func_def_paren = remove # ignore/add/remove/force # Add or remove space inside empty function '()' sp_inside_fparens = remove # ignore/add/remove/force # Add or remove space inside function '(' and ')' # NOTE: is 78 worse than ignore sp_inside_fparen = remove # ignore/add/remove/force # Add or remove space inside the first parens in the function type: 'void (*x)(...)' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_inside_tparen = ignore # ignore/add/remove/force # Add or remove between the parens in the function type: 'void (*x)(...)' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_tparen_close = ignore # ignore/add/remove/force # Add or remove space between ']' and '(' when part of a function call. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_square_fparen = ignore # ignore/add/remove/force # Add or remove space between ')' and '{' of function sp_fparen_brace = add # ignore/add/remove/force # Add or remove space between function name and '(' on function calls # NOTE: is 940 worse than ignore sp_func_call_paren = remove # ignore/add/remove/force # Add or remove space between function name and '()' on function calls without parameters. # If set to 'ignore' (the default), sp_func_call_paren is used. sp_func_call_paren_empty = remove # ignore/add/remove/force # Add or remove space between the user function name and '(' on function calls # You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file. sp_func_call_user_paren = remove # ignore/add/remove/force # Add or remove space between a constructor/destructor and the open paren sp_func_class_paren = remove # ignore/add/remove/force # Add or remove space between 'return' and '(' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_return_paren = ignore # ignore/add/remove/force # Add or remove space between '__attribute__' and '(' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_attribute_paren = ignore # ignore/add/remove/force # Add or remove space between 'defined' and '(' in '#if defined (FOO)' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_defined_paren = ignore # ignore/add/remove/force # Add or remove space between 'throw' and '(' in 'throw (something)' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_throw_paren = ignore # ignore/add/remove/force # Add or remove space between 'throw' and anything other than '(' as in '@throw [...];' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_throw = ignore # ignore/add/remove/force # Add or remove space between 'catch' and '(' in 'catch (something) { }' # If set to ignore, sp_before_sparen is used. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_catch_paren = ignore # ignore/add/remove/force # Add or remove space between 'version' and '(' in 'version (something) { }' (D language) # If set to ignore, sp_before_sparen is used. sp_version_paren = ignore # ignore/add/remove/force #ignore # Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language) # If set to ignore, sp_before_sparen is used. sp_scope_paren = ignore # ignore/add/remove/force #ignore # Add or remove space between macro and value sp_macro = remove # ignore/add/remove/force #force # Add or remove space between macro function ')' and value sp_macro_func = remove # ignore/add/remove/force #force # Add or remove space between 'else' and '{' if on the same line sp_else_brace = add # ignore/add/remove/force # Add or remove space between '}' and 'else' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_brace_else = ignore # ignore/add/remove/force # Add or remove space between '}' and the name of a typedef on the same line sp_brace_typedef = add # ignore/add/remove/force # Add or remove space between 'catch' and '{' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_catch_brace = ignore # ignore/add/remove/force # Add or remove space between '}' and 'catch' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_brace_catch = ignore # ignore/add/remove/force # Add or remove space between 'finally' and '{' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_finally_brace = ignore # ignore/add/remove/force # Add or remove space between '}' and 'finally' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_brace_finally = ignore # ignore/add/remove/force # Add or remove space between 'try' and '{' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_try_brace = ignore # ignore/add/remove/force # Add or remove space between get/set and '{' if on the same line # WARNING: Code doesn't seem to use this feature - delete from the config? sp_getset_brace = ignore # ignore/add/remove/force # Add or remove space before the '::' operator # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_dc = ignore # ignore/add/remove/force # Add or remove space after the '::' operator # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_dc = ignore # ignore/add/remove/force # Add or remove around the D named array initializer ':' operator sp_d_array_colon = ignore # ignore/add/remove/force #ignore # Add or remove space after the '!' (not) operator. Default=Remove sp_not = remove # ignore/add/remove/force # Add or remove space after the '~' (invert) operator. Default=Remove sp_inv = remove # ignore/add/remove/force # Add or remove space after the '&' (address-of) operator. Default=Remove # This does not affect the spacing after a '&' that is part of a type. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_addr = ignore # ignore/add/remove/force # Add or remove space around the '.' or '->' operators. Default=Remove # NOTE: is 28 worse than ignore sp_member = remove # ignore/add/remove/force # Add or remove space after the '*' (dereference) operator. Default=Remove # This does not affect the spacing after a '*' that is part of a type. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_deref = ignore # ignore/add/remove/force # Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove # NOTE: is 4 worse than ignore sp_sign = remove # ignore/add/remove/force # Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove sp_incdec = remove # ignore/add/remove/force # Add or remove space before a backslash-newline at the end of a line. Default=Add sp_before_nl_cont = add # ignore/add/remove/force #force # Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;' sp_after_oc_scope = ignore # ignore/add/remove/force #ignore # Add or remove space after the colon in message specs # '-(int) f:(int) x;' vs '-(int) f: (int) x;' sp_after_oc_colon = ignore # ignore/add/remove/force #ignore # Add or remove space before the colon in message specs # '-(int) f: (int) x;' vs '-(int) f : (int) x;' sp_before_oc_colon = ignore # ignore/add/remove/force #ignore # Add or remove space after the colon in immutable dictionary expression # 'NSDictionary *test = @{@"foo" :@"bar"};' sp_after_oc_dict_colon = ignore # ignore/add/remove/force #ignore # Add or remove space before the colon in immutable dictionary expression # 'NSDictionary *test = @{@"foo" :@"bar"};' sp_before_oc_dict_colon = ignore # ignore/add/remove/force #ignore # Add or remove space after the colon in message specs # '[object setValue:1];' vs '[object setValue: 1];' sp_after_send_oc_colon = ignore # ignore/add/remove/force #ignore # Add or remove space before the colon in message specs # '[object setValue:1];' vs '[object setValue :1];' sp_before_send_oc_colon = ignore # ignore/add/remove/force #ignore # Add or remove space after the (type) in message specs # '-(int)f: (int) x;' vs '-(int)f: (int)x;' sp_after_oc_type = ignore # ignore/add/remove/force #ignore # Add or remove space after the first (type) in message specs # '-(int) f:(int)x;' vs '-(int)f:(int)x;' sp_after_oc_return_type = ignore # ignore/add/remove/force #ignore # Add or remove space between '@selector' and '(' # '@selector(msgName)' vs '@selector (msgName)' # Also applies to @protocol() constructs sp_after_oc_at_sel = ignore # ignore/add/remove/force #ignore # Add or remove space between '@selector(x)' and the following word # '@selector(foo) a:' vs '@selector(foo)a:' sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force #ignore # Add or remove space inside '@selector' parens # '@selector(foo)' vs '@selector( foo )' # Also applies to @protocol() constructs sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force #ignore # Add or remove space before a block pointer caret # '^int (int arg){...}' vs. ' ^int (int arg){...}' sp_before_oc_block_caret = ignore # ignore/add/remove/force #ignore # Add or remove space after a block pointer caret # '^int (int arg){...}' vs. '^ int (int arg){...}' sp_after_oc_block_caret = ignore # ignore/add/remove/force #ignore # Add or remove space between the receiver and selector in a message. # '[receiver selector ...]' sp_after_oc_msg_receiver = ignore # ignore/add/remove/force #ignore # Add or remove space after @property. sp_after_oc_property = ignore # ignore/add/remove/force #ignore # Add or remove space around the ':' in 'b ? t : f' sp_cond_colon = add # ignore/add/remove/force # Add or remove space around the '?' in 'b ? t : f' sp_cond_question = add # ignore/add/remove/force # Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_case_label = ignore # ignore/add/remove/force # Control the space around the D '..' operator. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_range = ignore # ignore/add/remove/force # Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java) # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_for_colon = ignore # ignore/add/remove/force # Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java) # WARNING: Code doesn't seem to use this feature - delete from the config? sp_before_for_colon = ignore # ignore/add/remove/force # Control the spacing in 'extern (C)' (D) # WARNING: Code doesn't seem to use this feature - delete from the config? sp_extern_paren = ignore # ignore/add/remove/force # Control the space after the opening of a C++ comment '// A' vs '//A' sp_cmt_cpp_start = add # ignore/add/remove/force #force # Controls the spaces between #else or #endif and a trailing comment # WARNING: Code doesn't seem to use this feature - delete from the config? sp_endif_cmt = ignore # ignore/add/remove/force # Controls the spaces after 'new', 'delete', and 'delete[]' # WARNING: Code doesn't seem to use this feature - delete from the config? sp_after_new = ignore # ignore/add/remove/force # Controls the spaces before a trailing or embedded comment sp_before_tr_emb_cmt = force # ignore/add/remove/force #force # Number of spaces before a trailing or embedded comment sp_num_before_tr_emb_cmt = 2 # number #force # Control space between a Java annotation and the open paren. # WARNING: Code doesn't seem to use this feature - delete from the config? sp_annotation_paren = ignore # ignore/add/remove/force # # Code alignment (not left column spaces/tabs) # # Whether to keep non-indenting tabs align_keep_tabs = false # false/true #force # Whether to use tabs for aligning # WARNING: Code doesn't seem to use this feature - delete from the config? align_with_tabs = false # false/true # Whether to bump out to the next tab when aligning align_on_tabstop = false # false/true # Whether to left-align numbers # WARNING: Code doesn't seem to use this feature - delete from the config? align_number_left = false # false/true # Align variable definitions in prototypes and functions # WARNING: Code doesn't seem to use this feature - delete from the config? align_func_params = false # false/true # Align parameters in single-line functions that have the same name. # The function names must already be aligned with each other. align_same_func_call_params = false # false/true # The span for aligning variable definitions (0=don't align) align_var_def_span = 0 # number # How to align the star in variable definitions. # 0=Part of the type 'void * foo;' # 1=Part of the variable 'void *foo;' # 2=Dangling 'void *foo;' # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_star_style = 0 # number # How to align the '&' in variable definitions. # 0=Part of the type # 1=Part of the variable # 2=Dangling # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_amp_style = 0 # number # The threshold for aligning variable definitions (0=no limit) # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_thresh = 0 # number # The gap for aligning variable definitions # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_gap = 0 # number # Whether to align the colon in struct bit fields # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_colon = false # false/true # Whether to align any attribute after the variable name # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_attribute = false # false/true # Whether to align inline struct/enum/union variable definitions # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_def_inline = false # false/true # The span for aligning on '=' in assignments (0=don't align) align_assign_span = 0 # number # The threshold for aligning on '=' in assignments (0=no limit) # WARNING: Code doesn't seem to use this feature - delete from the config? align_assign_thresh = 0 # number # The span for aligning on '=' in enums (0=don't align) # WARNING: Code doesn't seem to use this feature - delete from the config? align_enum_equ_span = 0 # number # The threshold for aligning on '=' in enums (0=no limit) # WARNING: Code doesn't seem to use this feature - delete from the config? align_enum_equ_thresh = 0 # number # The span for aligning struct/union (0=don't align) align_var_struct_span = 0 # number # The threshold for aligning struct/union member definitions (0=no limit) # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_struct_thresh = 0 # number # The gap for aligning struct/union member definitions # WARNING: Code doesn't seem to use this feature - delete from the config? align_var_struct_gap = 0 # number # The span for aligning struct initializer values (0=don't align) align_struct_init_span = 0 # number # The minimum space between the type and the synonym of a typedef # WARNING: Code doesn't seem to use this feature - delete from the config? align_typedef_gap = 0 # number # The span for aligning single-line typedefs (0=don't align) # WARNING: Code doesn't seem to use this feature - delete from the config? align_typedef_span = 0 # number # How to align typedef'd functions with other typedefs # 0: Don't mix them at all # 1: align the open paren with the types # 2: align the function type name with the other type names # WARNING: Code doesn't seem to use this feature - delete from the config? align_typedef_func = 0 # number # Controls the positioning of the '*' in typedefs. Just try it. # 0: Align on typedef type, ignore '*' # 1: The '*' is part of type name: typedef int *pint; # 2: The '*' is part of the type, but dangling: typedef int *pint; # WARNING: Code doesn't seem to use this feature - delete from the config? align_typedef_star_style = 0 # number # Controls the positioning of the '&' in typedefs. Just try it. # 0: Align on typedef type, ignore '&' # 1: The '&' is part of type name: typedef int &pint; # 2: The '&' is part of the type, but dangling: typedef int &pint; # WARNING: Code doesn't seem to use this feature - delete from the config? align_typedef_amp_style = 0 # number # The span for aligning comments that end lines (0=don't align) align_right_cmt_span = 2 # number # If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment align_right_cmt_mix = false # false/true # If a trailing comment is more than this number of columns away from the text it follows, # it will qualify for being aligned. This has to be > 0 to do anything. # WARNING: Best is not unique (0 1) align_right_cmt_gap = 0 # number # Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore) # WARNING: Best is not unique (1 2) align_right_cmt_at_col = 0 # number # The span for aligning function prototypes (0=don't align) align_func_proto_span = 0 # number # Minimum gap between the return type and the function name. # WARNING: Code doesn't seem to use this feature - delete from the config? align_func_proto_gap = 0 # number # Align function protos on the 'operator' keyword instead of what follows # WARNING: Code doesn't seem to use this feature - delete from the config? align_on_operator = false # false/true # Whether to mix aligning prototype and variable declarations. # If true, align_var_def_XXX options are used instead of align_func_proto_XXX options. # WARNING: Code doesn't seem to use this feature - delete from the config? align_mix_var_proto = false # false/true # Align single-line functions with function prototypes, uses align_func_proto_span # WARNING: Code doesn't seem to use this feature - delete from the config? align_single_line_func = false # false/true # Aligning the open brace of single-line functions. # Requires align_single_line_func=true, uses align_func_proto_span # WARNING: Code doesn't seem to use this feature - delete from the config? align_single_line_brace = false # false/true # Gap for align_single_line_brace. # WARNING: Code doesn't seem to use this feature - delete from the config? align_single_line_brace_gap = 0 # number # The span for aligning ObjC msg spec (0=don't align) align_oc_msg_spec_span = 0 # number #ignore # Whether to align macros wrapped with a backslash and a newline. # This will not work right if the macro contains a multi-line comment. align_nl_cont = false # false/true # # Align macro functions and variables together # WARNING: Code doesn't seem to use this feature - delete from the config? align_pp_define_together = false # false/true # The minimum space between label and value of a preprocessor define # WARNING: Code doesn't seem to use this feature - delete from the config? align_pp_define_gap = 0 # number # The span for aligning on '#define' bodies (0=don't align) align_pp_define_span = 0 # number # Align lines that start with '<<' with previous '<<'. Default=true # WARNING: Code doesn't seem to use this feature - delete from the config? align_left_shift = false # false/true # Span for aligning parameters in an Obj-C message call on the ':' (0=don't align) align_oc_msg_colon_span = 0 # number #ignore # If true, always align with the first parameter, even if it is too short. align_oc_msg_colon_first = false # false/true #ignore # Aligning parameters in an Obj-C '+' or '-' declaration on the ':' align_oc_decl_colon = false # false/true #ignore # # Newline adding and removing options # # Whether to collapse empty blocks between '{' and '}' nl_collapse_empty_body = false # false/true # Don't split one-line braced assignments - 'foo_t f = { 1, 2 };' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_assign_leave_one_liners = false # false/true # Don't split one-line braced statements inside a class xx { } body # WARNING: Code doesn't seem to use this feature - delete from the config? nl_class_leave_one_liners = false # false/true # Don't split one-line enums: 'enum foo { BAR = 15 };' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_enum_leave_one_liners = false # false/true # Don't split one-line get or set functions # WARNING: Code doesn't seem to use this feature - delete from the config? nl_getset_leave_one_liners = false # false/true # Don't split one-line function definitions - 'int foo() { return 0; }' nl_func_leave_one_liners = true # false/true # Don't split one-line if/else statements - 'if(a) b++;' nl_if_leave_one_liners = true # false/true # Don't split one-line OC messages nl_oc_msg_leave_one_liner = false # false/true #ignore # Add or remove newlines at the start of the file nl_start_of_file = remove # ignore/add/remove/force #force # The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force' nl_start_of_file_min = 0 # number #force # Add or remove newline at the end of the file nl_end_of_file = add # ignore/add/remove/force #force # The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force') nl_end_of_file_min = 1 # number #force # Add or remove newline between '=' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_assign_brace = ignore # ignore/add/remove/force # Add or remove newline between '=' and '[' (D only) # WARNING: Code doesn't seem to use this feature - delete from the config? nl_assign_square = ignore # ignore/add/remove/force # Add or remove newline after '= [' (D only). Will also affect the newline before the ']' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_square_assign = ignore # ignore/add/remove/force # The number of blank lines after a block of variable definitions at the top of a function body # 0 = No change (default) nl_func_var_def_blk = 0 # number #force # The number of newlines before a block of typedefs # 0 = No change (default) nl_typedef_blk_start = 0 # number #force # The number of newlines after a block of typedefs # 0 = No change (default) nl_typedef_blk_end = 0 # number #force # The maximum consecutive newlines within a block of typedefs # 0 = No change (default) # WARNING: Best is not unique (0 2) nl_typedef_blk_in = 0 # number # The number of newlines before a block of variable definitions not at the top of a function body # 0 = No change (default) # WARNING: Best is not unique (0 1) nl_var_def_blk_start = 0 # number # The number of newlines after a block of variable definitions not at the top of a function body # 0 = No change (default) # WARNING: Best is not unique (0 1) nl_var_def_blk_end = 0 # number # The maximum consecutive newlines within a block of variable definitions # 0 = No change (default) # WARNING: Best is not unique (0 3) nl_var_def_blk_in = 0 # number # Add or remove newline between a function call's ')' and '{', as in: # list_for_each(item, &list) { } # NOTE: is 28 worse than ignore nl_fcall_brace = add # ignore/add/remove/force # Add or remove newline between 'enum' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_enum_brace = ignore # ignore/add/remove/force # Add or remove newline between 'struct and '{' nl_struct_brace = add # ignore/add/remove/force # Add or remove newline between 'union' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_union_brace = ignore # ignore/add/remove/force # Add or remove newline between 'if' and '{' # NOTE: is 245 worse than ignore nl_if_brace = add # ignore/add/remove/force # Add or remove newline between '}' and 'else' nl_brace_else = add # ignore/add/remove/force # Add or remove newline between 'else if' and '{' # If set to ignore, nl_if_brace is used instead nl_elseif_brace = add # ignore/add/remove/force # Add or remove newline between 'else' and '{' nl_else_brace = add # ignore/add/remove/force # Add or remove newline between 'else' and 'if' nl_else_if = remove # ignore/add/remove/force # Add or remove newline between '}' and 'finally' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_brace_finally = ignore # ignore/add/remove/force # Add or remove newline between 'finally' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_finally_brace = ignore # ignore/add/remove/force # Add or remove newline between 'try' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_try_brace = ignore # ignore/add/remove/force # Add or remove newline between get/set and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_getset_brace = ignore # ignore/add/remove/force # Add or remove newline between 'for' and '{' # NOTE: is 93 worse than ignore nl_for_brace = add # ignore/add/remove/force # Add or remove newline between 'catch' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_catch_brace = ignore # ignore/add/remove/force # Add or remove newline between '}' and 'catch' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_brace_catch = ignore # ignore/add/remove/force # Add or remove newline between 'while' and '{' # NOTE: is 21 worse than ignore nl_while_brace = add # ignore/add/remove/force # Add or remove newline between 'scope (x)' and '{' (D) # WARNING: Code doesn't seem to use this feature - delete from the config? nl_scope_brace = ignore # ignore/add/remove/force # Add or remove newline between 'unittest' and '{' (D) # WARNING: Code doesn't seem to use this feature - delete from the config? nl_unittest_brace = ignore # ignore/add/remove/force # Add or remove newline between 'version (x)' and '{' (D) # WARNING: Code doesn't seem to use this feature - delete from the config? nl_version_brace = ignore # ignore/add/remove/force # Add or remove newline between 'using' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_using_brace = ignore # ignore/add/remove/force # Add or remove newline between two open or close braces. # Due to general newline/brace handling, REMOVE may not work. nl_brace_brace = remove # ignore/add/remove/force # Add or remove newline between 'do' and '{' # NOTE: is 3 worse than ignore nl_do_brace = add # ignore/add/remove/force # Add or remove newline between '}' and 'while' of 'do' statement nl_brace_while = add # ignore/add/remove/force #force # Add or remove newline between 'switch' and '{' # NOTE: is 21 worse than ignore nl_switch_brace = add # ignore/add/remove/force # Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc. # Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_multi_line_cond = false # false/true # Force a newline in a define after the macro name for multi-line defines. nl_multi_line_define = false # false/true # Whether to put a newline before 'case' statement nl_before_case = false # false/true # Add or remove newline between ')' and 'throw' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_before_throw = ignore # ignore/add/remove/force # Whether to put a newline after 'case' statement nl_after_case = false # false/true # Add or remove a newline between a case ':' and '{'. Overrides nl_after_case. # NOTE: is 27 worse than ignore nl_case_colon_brace = add # ignore/add/remove/force # Newline between namespace and { # WARNING: Code doesn't seem to use this feature - delete from the config? nl_namespace_brace = ignore # ignore/add/remove/force # Add or remove newline between 'template<>' and whatever follows. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_template_class = ignore # ignore/add/remove/force # Add or remove newline between 'class' and '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_class_brace = ignore # ignore/add/remove/force # Add or remove newline after each ',' in the constructor member initialization # WARNING: Code doesn't seem to use this feature - delete from the config? nl_class_init_args = ignore # ignore/add/remove/force # Add or remove newline between return type and function name in a function definition nl_func_type_name = remove # ignore/add/remove/force # Add or remove newline between return type and function name inside a class {} # Uses nl_func_type_name or nl_func_proto_type_name if set to ignore. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_func_type_name_class = ignore # ignore/add/remove/force # Add or remove newline between function scope and name in a definition # Controls the newline after '::' in 'void A::f() { }' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_func_scope_name = ignore # ignore/add/remove/force # Add or remove newline between return type and function name in a prototype # NOTE: is 6 worse than ignore nl_func_proto_type_name = remove # ignore/add/remove/force # Add or remove newline between a function name and the opening '(' nl_func_paren = remove # ignore/add/remove/force # Add or remove newline between a function name and the opening '(' in the definition nl_func_def_paren = remove # ignore/add/remove/force # Add or remove newline after '(' in a function declaration # NOTE: is 6 worse than ignore nl_func_decl_start = remove # ignore/add/remove/force # Add or remove newline after '(' in a function definition # NOTE: is 23 worse than ignore nl_func_def_start = remove # ignore/add/remove/force # Overrides nl_func_decl_start when there is only one parameter. nl_func_decl_start_single = ignore # ignore/add/remove/force #force # Overrides nl_func_def_start when there is only one parameter. nl_func_def_start_single = ignore # ignore/add/remove/force #force # Add or remove newline after each ',' in a function declaration # NOTE: is 38 worse than ignore nl_func_decl_args = remove # ignore/add/remove/force # Add or remove newline after each ',' in a function definition # NOTE: is 37 worse than ignore nl_func_def_args = remove # ignore/add/remove/force # Add or remove newline before the ')' in a function declaration nl_func_decl_end = remove # ignore/add/remove/force # Add or remove newline before the ')' in a function definition nl_func_def_end = remove # ignore/add/remove/force # Overrides nl_func_decl_end when there is only one parameter. nl_func_decl_end_single = ignore # ignore/add/remove/force #force # Overrides nl_func_def_end when there is only one parameter. nl_func_def_end_single = ignore # ignore/add/remove/force #force # Add or remove newline between '()' in a function declaration. nl_func_decl_empty = remove # ignore/add/remove/force # Add or remove newline between '()' in a function definition. nl_func_def_empty = remove # ignore/add/remove/force # Whether to put each OC message parameter on a separate line # See nl_oc_msg_leave_one_liner #ignore nl_oc_msg_args = false # false/true #ignore # Add or remove newline between function signature and '{' # NOTE: is 156 worse than ignore nl_fdef_brace = add # ignore/add/remove/force # Add or remove a newline between the return keyword and return expression. # NOTE: is 15 worse than ignore nl_return_expr = remove # ignore/add/remove/force # Whether to put a newline after semicolons, except in 'for' statements nl_after_semicolon = false # false/true # Whether to put a newline after brace open. # This also adds a newline before the matching brace close. nl_after_brace_open = false # false/true # If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is # placed between the open brace and a trailing single-line comment. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_brace_open_cmt = false # false/true # Whether to put a newline after a virtual brace open with a non-empty body. # These occur in un-braced if/while/do/for statement bodies. nl_after_vbrace_open = false # false/true # Whether to put a newline after a virtual brace open with an empty body. # These occur in un-braced if/while/do/for statement bodies. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_vbrace_open_empty = false # false/true # Whether to put a newline after a brace close. # Does not apply if followed by a necessary ';'. nl_after_brace_close = false # false/true # Whether to put a newline after a virtual brace close. # Would add a newline before return in: 'if (foo) a++; return;' nl_after_vbrace_close = false # false/true # Control the newline between the close brace and 'b' in: 'struct { int a; } b;' # Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close nl_brace_struct_var = remove # ignore/add/remove/force # Whether to alter newlines in '#define' macros nl_define_macro = false # false/true # Whether to not put blanks after '#ifxx', '#elxx', or before '#endif' nl_squeeze_ifdef = false # false/true # Add or remove blank line before 'if' nl_before_if = ignore # ignore/add/remove/force #force # Add or remove blank line after 'if' statement nl_after_if = ignore # ignore/add/remove/force #force # Add or remove blank line before 'for' nl_before_for = ignore # ignore/add/remove/force #force # Add or remove blank line after 'for' statement nl_after_for = ignore # ignore/add/remove/force #force # Add or remove blank line before 'while' nl_before_while = ignore # ignore/add/remove/force #force # Add or remove blank line after 'while' statement nl_after_while = ignore # ignore/add/remove/force #force # Add or remove blank line before 'switch' nl_before_switch = ignore # ignore/add/remove/force #force # Add or remove blank line after 'switch' statement nl_after_switch = ignore # ignore/add/remove/force #force # Add or remove blank line before 'do' nl_before_do = ignore # ignore/add/remove/force #force # Add or remove blank line after 'do/while' statement nl_after_do = ignore # ignore/add/remove/force #force # Whether to double-space commented-entries in struct/enum # WARNING: Code doesn't seem to use this feature - delete from the config? nl_ds_struct_enum_cmt = false # false/true # Whether to double-space before the close brace of a struct/union/enum # (lower priority than 'eat_blanks_before_close_brace') # WARNING: Code doesn't seem to use this feature - delete from the config? nl_ds_struct_enum_close_brace = false # false/true # Add or remove a newline around a class colon. # Related to pos_class_colon, nl_class_init_args, and pos_comma. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_class_colon = ignore # ignore/add/remove/force # Change simple unbraced if statements into a one-liner # 'if(b)\n i++;' => 'if(b) i++;' nl_create_if_one_liner = false # false/true # Change simple unbraced for statements into a one-liner # 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);' nl_create_for_one_liner = false # false/true # Change simple unbraced while statements into a one-liner # 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);' nl_create_while_one_liner = false # false/true # # Positioning options # # The position of arithmetic operators in wrapped expressions pos_arith = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of assignment in wrapped expressions. # Do not affect '=' followed by '{' pos_assign = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of boolean operators in wrapped expressions pos_bool = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of comparison operators in wrapped expressions # WARNING: Best is not unique (join lead) pos_compare = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of conditional (b ? t : f) operators in wrapped expressions # NOTE: is 4 worse than ignore pos_conditional = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of the comma in wrapped expressions # NOTE: is 2 worse than ignore pos_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of the comma in the constructor initialization list # WARNING: Code doesn't seem to use this feature - delete from the config? pos_class_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # The position of colons between constructor and member initialization # WARNING: Code doesn't seem to use this feature - delete from the config? pos_class_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force # # Line Splitting options # # Try to limit code width to N number of columns code_width = 0 # number # Whether to fully split long 'for' statements at semi-colons # WARNING: Code doesn't seem to use this feature - delete from the config? ls_for_split_full = false # false/true # Whether to fully split long function protos/calls at commas # WARNING: Code doesn't seem to use this feature - delete from the config? ls_func_split_full = false # false/true # Whether to split lines as close to code_width as possible and ignore some groupings # WARNING: Code doesn't seem to use this feature - delete from the config? ls_code_width = false # false/true # # Blank line options # # The maximum consecutive newlines nl_max = 3 # number #force # The number of newlines after a function prototype, if followed by another function prototype # WARNING: Best is not unique (0 1) nl_after_func_proto = 0 # number # The number of newlines after a function prototype, if not followed by another function prototype # WARNING: Best is not unique (0 1) nl_after_func_proto_group = 0 # number # The number of newlines after '}' of a multi-line function body nl_after_func_body = 0 # number # The number of newlines after '}' of a multi-line function body in a class declaration # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_func_body_class = 0 # number # The number of newlines after '}' of a single line function body # WARNING: Best is not unique (0 1) nl_after_func_body_one_liner = 0 # number # The minimum number of newlines before a multi-line comment. # Doesn't apply if after a brace open or another multi-line comment. # WARNING: Best is not unique (0 1) nl_before_block_comment = 0 # number # The minimum number of newlines before a single-line C comment. # Doesn't apply if after a brace open or other single-line C comments. # WARNING: Best is not unique (0 1) nl_before_c_comment = 0 # number # The minimum number of newlines before a CPP comment. # Doesn't apply if after a brace open or other CPP comments. # WARNING: Best is not unique (0 1) nl_before_cpp_comment = 0 # number # Whether to force a newline after a multi-line comment. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_multiline_comment = false # false/true # The number of newlines after '}' or ';' of a struct/enum/union definition # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_struct = 0 # number # The number of newlines after '}' or ';' of a class definition # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_class = 0 # number # The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. # Will not change the newline count if after a brace open. # 0 = No change. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_before_access_spec = 0 # number # The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. # 0 = No change. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_access_spec = 0 # number # The number of newlines between a function def and the function comment. # 0 = No change. nl_comment_func_def = 0 # number # The number of newlines after a try-catch-finally block that isn't followed by a brace close. # 0 = No change. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_try_catch_finally = 0 # number # The number of newlines before and after a property, indexer or event decl. # 0 = No change. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_around_cs_property = 0 # number # The number of newlines between the get/set/add/remove handlers in C#. # 0 = No change. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_between_get_set = 0 # number # Add or remove newline between C# property and the '{' # WARNING: Code doesn't seem to use this feature - delete from the config? nl_property_brace = ignore # ignore/add/remove/force # Whether to remove blank lines after '{' eat_blanks_after_open_brace = true # false/true #force # Whether to remove blank lines before '}' eat_blanks_before_close_brace = true # false/true #force # How aggressively to remove extra newlines not in preproc. # 0: No change # 1: Remove most newlines not handled by other config # 2: Remove all newlines and reformat completely by config # ERROR: nl_remove_extra_newlines = 1 crashes with status 139. # ERROR: nl_remove_extra_newlines = 2 crashes with status 139. # WARNING: Best is not unique (0 indent_columns) nl_remove_extra_newlines = 0 # number # Whether to put a blank line before 'return' statements, unless after an open brace. nl_before_return = false # false/true #force # Whether to put a blank line after 'return' statements, unless followed by a close brace. nl_after_return = false # false/true #force # Whether to put a newline after a Java annotation statement. # Only affects annotations that are after a newline. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_after_annotation = ignore # ignore/add/remove/force # Controls the newline between two annotations. # WARNING: Code doesn't seem to use this feature - delete from the config? nl_between_annotation = ignore # ignore/add/remove/force # # Code modifying options (non-whitespace) # # Add or remove braces on single-line 'do' statement mod_full_brace_do = add # ignore/add/remove/force # Add or remove braces on single-line 'for' statement # NOTE: is 5 worse than ignore mod_full_brace_for = remove # ignore/add/remove/force # Add or remove braces on single-line function definitions. (Pawn) mod_full_brace_function = ignore # ignore/add/remove/force #ignore # Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'. mod_full_brace_if = add # ignore/add/remove/force # Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if. # If any must be braced, they are all braced. If all can be unbraced, then the braces are removed. mod_full_brace_if_chain = true # false/true #force # Don't remove braces around statements that span N newlines mod_full_brace_nl = 2 # number #force # Add or remove braces on single-line 'while' statement mod_full_brace_while = remove # ignore/add/remove/force # Add or remove braces on single-line 'using ()' statement # WARNING: Code doesn't seem to use this feature - delete from the config? mod_full_brace_using = ignore # ignore/add/remove/force # Add or remove unnecessary paren on 'return' statement # NOTE: is 42 worse than ignore mod_paren_on_return = remove # ignore/add/remove/force # Whether to change optional semicolons to real semicolons # WARNING: Code doesn't seem to use this feature - delete from the config? mod_pawn_semicolon = false # false/true # Add parens on 'while' and 'if' statement around bools mod_full_paren_if_bool = false # false/true # Whether to remove superfluous semicolons mod_remove_extra_semicolon = false # false/true # If a function body exceeds the specified number of newlines and doesn't have a comment after # the close brace, a comment will be added. mod_add_long_function_closebrace_comment = 0 # number # If a switch body exceeds the specified number of newlines and doesn't have a comment after # the close brace, a comment will be added. mod_add_long_switch_closebrace_comment = 0 # number # If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after # the #endif, a comment will be added. mod_add_long_ifdef_endif_comment = 0 # number # If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after # the #else, a comment will be added. mod_add_long_ifdef_else_comment = 0 # number # If TRUE, will sort consecutive single-line 'import' statements [Java, D] # WARNING: Code doesn't seem to use this feature - delete from the config? mod_sort_import = false # false/true # If TRUE, will sort consecutive single-line 'using' statements [C#] # WARNING: Code doesn't seem to use this feature - delete from the config? mod_sort_using = false # false/true # If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C] # This is generally a bad idea, as it may break your code. mod_sort_include = false # false/true # If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace. # WARNING: Code doesn't seem to use this feature - delete from the config? mod_move_case_break = false # false/true # Will add or remove the braces around a fully braced case statement. # Will only remove the braces if there are no variable declarations in the block. # NOTE: is 581 worse than ignore mod_case_brace = remove # ignore/add/remove/force # If TRUE, it will remove a void 'return;' that appears as the last statement in a function. mod_remove_empty_return = true # false/true #force # # Comment modifications # # Try to wrap comments at cmt_width columns cmt_width = 0 # number # Set the comment reflow mode (default: 0) # 0: no reflowing (apart from the line wrapping due to cmt_width) # 1: no touching at all # 2: full reflow # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_reflow_mode = 0 # number # If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars. # Default is true. cmt_indent_multi = false # false/true # Whether to group c-comments that look like they are in a block cmt_c_group = false # false/true # Whether to put an empty '/*' on the first line of the combined c-comment # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_c_nl_start = false # false/true # Whether to put a newline before the closing '*/' of the combined c-comment # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_c_nl_end = false # false/true # Whether to group cpp-comments that look like they are in a block # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_cpp_group = false # false/true # Whether to put an empty '/*' on the first line of the combined cpp-comment # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_cpp_nl_start = false # false/true # Whether to put a newline before the closing '*/' of the combined cpp-comment # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_cpp_nl_end = false # false/true # Whether to change cpp-comments into c-comments cmt_cpp_to_c = false # false/true # Whether to put a star on subsequent comment lines # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_star_cont = false # false/true # The number of spaces to insert at the start of subsequent comment lines # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_sp_before_star_cont = 0 # number # The number of spaces to insert after the star on subsequent comment lines # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_sp_after_star_cont = 0 # number # For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of # the comment are the same length. Default=True # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_multi_check_last = false # false/true # The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment. # Will substitute $(filename) with the current file's name. # WARNING: unsupported string cmt_insert_file_header = "" # string # The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment. # Will substitute $(filename) with the current file's name. # WARNING: unsupported string cmt_insert_file_footer = "" # string # The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment. # Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff. # Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... } # WARNING: unsupported string cmt_insert_func_header = "" # string # The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment. # Will substitute $(class) with the class name. # WARNING: unsupported string cmt_insert_class_header = "" # string # The filename that contains text to insert before a Obj-C message specification if the method isn't preceeded with a C/C++ comment. # Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff. cmt_insert_oc_msg_header = "" # string #ignore # If a preprocessor is encountered when stepping backwards from a function name, then # this option decides whether the comment should be inserted. # Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header. #ignore # WARNING: Code doesn't seem to use this feature - delete from the config? cmt_insert_before_preproc = false # false/true # # Preprocessor options # # Control indent of preprocessors inside #if blocks at brace level 0 # WARNING: Indifferent... please decide manually. pp_indent = ignore # ignore/add/remove/force # Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false) pp_indent_at_level = false # false/true # If pp_indent_at_level=false, specifies the number of columns to indent per level. Default=1. # WARNING: Code doesn't seem to use this feature - delete from the config? pp_indent_count = 0 # number # Add or remove space after # based on pp_level of #if blocks # NOTE: is 28 worse than ignore pp_space = remove # ignore/add/remove/force # Sets the number of spaces added with pp_space # WARNING: Code doesn't seem to use this feature - delete from the config? pp_space_count = 0 # number # The indent for #region and #endregion in C# and '#pragma region' in C/C++ # WARNING: Code doesn't seem to use this feature - delete from the config? pp_indent_region = 0 # number # Whether to indent the code between #region and #endregion # WARNING: Code doesn't seem to use this feature - delete from the config? pp_region_indent_code = false # false/true # If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level # WARNING: Code doesn't seem to use this feature - delete from the config? pp_indent_if = 0 # number # Control whether to indent the code between #if, #else and #endif when not at file-level pp_if_indent_code = false # false/true # Whether to indent '#define' at the brace level (true) or from column 1 (false) pp_define_at_level = true # false/true # You can force a token to be a type with the 'type' option. # Example: # type myfoo1 myfoo2 type void type float type vector type entity type string type .void type .float type .vector type .entity type .string # # You can create custom macro-based indentation using macro-open, # macro-else and macro-close. # Example: # macro-open BEGIN_TEMPLATE_MESSAGE_MAP # macro-open BEGIN_MESSAGE_MAP # macro-close END_MESSAGE_MAP # # You can assign any keyword to any type with the set option. # set func_call_user _ N_ # menu QC OO macro-open CLASS macro-else EXTENDS macro-close ENDCLASS # translations set func_call_user _ # # The full syntax description of all custom definition config entries # is shown below: # # define custom tokens as: # - embed whitespace in token using '' escape character, or # put token in quotes # - these: ' " and ` are recognized as quote delimiters # # type token1 token2 token3 ... # ^ optionally specify multiple tokens on a single line # define def_token output_token # ^ output_token is optional, then NULL is assumed # macro-open token # macro-close token # macro-else token # set id token1 token2 ... # ^ optionally specify multiple tokens on a single line # ^ id is one of the names in token_enum.h sans the CT_ prefix, # e.g. PP_PRAGMA # # all tokens are separated by any mix of ',' commas, '=' equal signs # and whitespace (space, tab) #