new Lee Stricklin configs

diff --git a/balanceLeeStricklin.cfg b/balanceLeeStricklin.cfg
index e56a0c9d6e5a755f707054b628e5b4834509f169..0a24823c91ece2cb1668461a6528ced0983b8cc3 100644 (file)
--- a/balanceLeeStricklin.cfg
+++ b/balanceLeeStricklin.cfg
@@ -225,7 +225,7 @@ set g_balance_grapplehook_health 130
 // {{{ laser
 set g_balance_laser_primary_damage 25
 set g_balance_laser_primary_edgedamage 10
 // {{{ laser
 set g_balance_laser_primary_damage 25
 set g_balance_laser_primary_edgedamage 10

-set g_balance_laser_primary_force 258
+set g_balance_laser_primary_force 182 // Original value was insanely low :P

 set g_balance_laser_primary_radius 70
 set g_balance_laser_primary_speed 12000
 set g_balance_laser_primary_spread 0
 set g_balance_laser_primary_radius 70
 set g_balance_laser_primary_speed 12000
 set g_balance_laser_primary_spread 0


@@ -235,22 +235,22 @@ set g_balance_laser_primary_lifetime 30
 set g_balance_laser_primary_shotangle 0
 set g_balance_laser_primary_delay 0.03
 set g_balance_laser_primary_gauntlet 0
 set g_balance_laser_primary_shotangle 0
 set g_balance_laser_primary_delay 0.03
 set g_balance_laser_primary_gauntlet 0

-set g_balance_laser_primary_force_zscale 1
-set g_balance_laser_primary_force_velocitybias 0
+set g_balance_laser_primary_force_zscale 2 // 300 upforce
+set g_balance_laser_primary_force_velocitybias 0.3

 set g_balance_laser_secondary 0 // when 1, a secondary laser mode exists
 set g_balance_laser_secondary 0 // when 1, a secondary laser mode exists

-set g_balance_laser_secondary_damage 25
-set g_balance_laser_secondary_edgedamage 10
-set g_balance_laser_secondary_force 375
-set g_balance_laser_secondary_radius 70
-set g_balance_laser_secondary_speed 12000
+set g_balance_laser_secondary_damage 200 // dps
+set g_balance_laser_secondary_edgedamage 0
+set g_balance_laser_secondary_force 1300
+set g_balance_laser_secondary_radius 60
+set g_balance_laser_secondary_speed 0

 set g_balance_laser_secondary_spread 0
 set g_balance_laser_secondary_spread 0

-set g_balance_laser_secondary_refire 0.7
-set g_balance_laser_secondary_animtime 0.3
-set g_balance_laser_secondary_lifetime 30
-set g_balance_laser_secondary_shotangle -90
+set g_balance_laser_secondary_refire 0.066
+set g_balance_laser_secondary_animtime 0.066
+set g_balance_laser_secondary_lifetime 0
+set g_balance_laser_secondary_shotangle 0

 set g_balance_laser_secondary_delay 0
 set g_balance_laser_secondary_delay 0

-set g_balance_laser_secondary_gauntlet 0
-set g_balance_laser_secondary_force_zscale 1
+set g_balance_laser_secondary_gauntlet 1
+set g_balance_laser_secondary_force_zscale 1.25

 set g_balance_laser_secondary_force_velocitybias 0
 // }}}
 // {{{ shotgun
 set g_balance_laser_secondary_force_velocitybias 0
 // }}}
 // {{{ shotgun

diff --git a/physicsLeeStricklin.cfg b/physicsLeeStricklin.cfg
deleted file mode 100644 (file)
index 5d9a128..0000000
--- a/physicsLeeStricklin.cfg
+++ /dev/null
@@ -1,35 +0,0 @@
-// These have been modified from Nexuiz 2.4.2's physicsQBR.cfg file and a bunch of other crap div0 threw on here :P
-// DO NOT SCREW WITH friction on land, edge friction, step height, or sv_airaccel_qw
-sv_gravity 819
-sv_maxspeed 420
-sv_maxairspeed 283
-
-sv_stopspeed 100
-sv_accelerate 13
-sv_airaccelerate 6
-sv_friction 9.6 // higher values make you slide less
-edgefriction 1 // div0 says no! lol
-sv_stepheight 26
-sv_jumpvelocity 304
-sv_wateraccelerate -1
-sv_waterfriction -1
-sv_airaccel_sideways_friction 0 // pain in the ass to tweak without screwing up the strafing
-sv_airaccel_qw -0.93 //given a negative value to combat potential cheats, was told by divVerent not to mess with it
-
-sv_airstopaccelerate 0
-sv_airstrafeaccelerate 0
-sv_maxairstrafespeed 0
-sv_airstrafeaccel_qw 0
-sv_aircontrol 0
-sv_aircontrol_penalty 0
-sv_aircontrol_power 2
-sv_airspeedlimit_nonqw 0
-sv_warsowbunny_turnaccel 0
-sv_warsowbunny_accel 0.1593
-sv_warsowbunny_topspeed 925
-sv_warsowbunny_backtosideratio 0.8
-sv_friction_on_land 0
-sv_doublejump 0
-sv_jumpspeedcap_min ""
-sv_jumpspeedcap_max 0.38
-sv_jumpspeedcap_max_disable_on_ramps 0

diff --git a/physicsLeeStricklinOld.cfg b/physicsLeeStricklinOld.cfg
new file mode 100644 (file)
index 0000000..5d9a128
--- /dev/null
+++ b/physicsLeeStricklinOld.cfg
@@ -0,0 +1,35 @@
+// These have been modified from Nexuiz 2.4.2's physicsQBR.cfg file and a bunch of other crap div0 threw on here :P
+// DO NOT SCREW WITH friction on land, edge friction, step height, or sv_airaccel_qw
+sv_gravity 819
+sv_maxspeed 420
+sv_maxairspeed 283
+
+sv_stopspeed 100
+sv_accelerate 13
+sv_airaccelerate 6
+sv_friction 9.6 // higher values make you slide less
+edgefriction 1 // div0 says no! lol
+sv_stepheight 26
+sv_jumpvelocity 304
+sv_wateraccelerate -1
+sv_waterfriction -1
+sv_airaccel_sideways_friction 0 // pain in the ass to tweak without screwing up the strafing
+sv_airaccel_qw -0.93 //given a negative value to combat potential cheats, was told by divVerent not to mess with it
+
+sv_airstopaccelerate 0
+sv_airstrafeaccelerate 0
+sv_maxairstrafespeed 0
+sv_airstrafeaccel_qw 0
+sv_aircontrol 0
+sv_aircontrol_penalty 0
+sv_aircontrol_power 2
+sv_airspeedlimit_nonqw 0
+sv_warsowbunny_turnaccel 0
+sv_warsowbunny_accel 0.1593
+sv_warsowbunny_topspeed 925
+sv_warsowbunny_backtosideratio 0.8
+sv_friction_on_land 0
+sv_doublejump 0
+sv_jumpspeedcap_min ""
+sv_jumpspeedcap_max 0.38
+sv_jumpspeedcap_max_disable_on_ramps 0