+// Q2 bsp stuff
+
+#define Q2BSPVERSION 38
+
+// leaffaces, leafbrushes, planes, and verts are still bounded by
+// 16 bit short limits
+
+//=============================================================================
+
+#define Q2LUMP_ENTITIES 0
+#define Q2LUMP_PLANES 1
+#define Q2LUMP_VERTEXES 2
+#define Q2LUMP_VISIBILITY 3
+#define Q2LUMP_NODES 4
+#define Q2LUMP_TEXINFO 5
+#define Q2LUMP_FACES 6
+#define Q2LUMP_LIGHTING 7
+#define Q2LUMP_LEAFS 8
+#define Q2LUMP_LEAFFACES 9
+#define Q2LUMP_LEAFBRUSHES 10
+#define Q2LUMP_EDGES 11
+#define Q2LUMP_SURFEDGES 12
+#define Q2LUMP_MODELS 13
+#define Q2LUMP_BRUSHES 14
+#define Q2LUMP_BRUSHSIDES 15
+#define Q2LUMP_POP 16
+#define Q2LUMP_AREAS 17
+#define Q2LUMP_AREAPORTALS 18
+#define Q2HEADER_LUMPS 19
+
+typedef struct q2dheader_s
+{
+ int ident;
+ int version;
+ lump_t lumps[Q2HEADER_LUMPS];
+} q2dheader_t;
+
+typedef struct q2dmodel_s
+{
+ float mins[3], maxs[3];
+ float origin[3]; // for sounds or lights
+ int headnode;
+ int firstface, numfaces; // submodels just draw faces
+ // without walking the bsp tree
+} q2dmodel_t;
+
+// planes (x&~1) and (x&~1)+1 are always opposites
+
+// contents flags are seperate bits
+// a given brush can contribute multiple content bits
+// multiple brushes can be in a single leaf
+
+// these definitions also need to be in q_shared.h!
+
+// lower bits are stronger, and will eat weaker brushes completely
+#define Q2CONTENTS_SOLID 1 // an eye is never valid in a solid
+#define Q2CONTENTS_WINDOW 2 // translucent, but not watery
+#define Q2CONTENTS_AUX 4
+#define Q2CONTENTS_LAVA 8
+#define Q2CONTENTS_SLIME 16
+#define Q2CONTENTS_WATER 32
+#define Q2CONTENTS_MIST 64
+#define Q2LAST_VISIBLE_CONTENTS 64
+
+// remaining contents are non-visible, and don't eat brushes
+
+#define Q2CONTENTS_AREAPORTAL 0x8000
+
+#define Q2CONTENTS_PLAYERCLIP 0x10000
+#define Q2CONTENTS_MONSTERCLIP 0x20000
+
+// currents can be added to any other contents, and may be mixed
+#define Q2CONTENTS_CURRENT_0 0x40000
+#define Q2CONTENTS_CURRENT_90 0x80000
+#define Q2CONTENTS_CURRENT_180 0x100000
+#define Q2CONTENTS_CURRENT_270 0x200000
+#define Q2CONTENTS_CURRENT_UP 0x400000
+#define Q2CONTENTS_CURRENT_DOWN 0x800000
+
+#define Q2CONTENTS_ORIGIN 0x1000000 // removed before bsping an entity
+
+#define Q2CONTENTS_MONSTER 0x2000000 // should never be on a brush, only in game
+#define Q2CONTENTS_DEADMONSTER 0x4000000
+#define Q2CONTENTS_DETAIL 0x8000000 // brushes to be added after vis leafs
+#define Q2CONTENTS_TRANSLUCENT 0x10000000 // auto set if any surface has trans
+#define Q2CONTENTS_LADDER 0x20000000
+
+
+
+#define Q2SURF_LIGHT 0x1 // value will hold the light strength
+
+#define Q2SURF_SLICK 0x2 // effects game physics
+
+#define Q2SURF_SKY 0x4 // don't draw, but add to skybox
+#define Q2SURF_WARP 0x8 // turbulent water warp
+#define Q2SURF_TRANS33 0x10
+#define Q2SURF_TRANS66 0x20
+#define Q2SURF_FLOWING 0x40 // scroll towards angle
+#define Q2SURF_NODRAW 0x80 // don't bother referencing the texture
+
+
+
+
+typedef struct q2dnode_s
+{
+ int planenum;
+ int children[2]; // negative numbers are -(leafs+1), not nodes
+ short mins[3]; // for frustom culling
+ short maxs[3];
+ unsigned short firstface;
+ unsigned short numfaces; // counting both sides
+} q2dnode_t;
+
+
+typedef struct q2texinfo_s
+{
+ float vecs[2][4]; // [s/t][xyz offset]
+ int flags; // miptex flags + overrides
+ int value; // light emission, etc
+ char texture[32]; // texture name (textures/*.wal)
+ int nexttexinfo; // for animations, -1 = end of chain
+} q2texinfo_t;
+
+typedef struct q2dleaf_s
+{
+ int contents; // OR of all brushes (not needed?)
+
+ short cluster;
+ short area;
+
+ short mins[3]; // for frustum culling
+ short maxs[3];
+
+ unsigned short firstleafface;
+ unsigned short numleaffaces;
+
+ unsigned short firstleafbrush;
+ unsigned short numleafbrushes;
+} q2dleaf_t;
+
+typedef struct q2dbrushside_s
+{
+ unsigned short planenum; // facing out of the leaf
+ short texinfo;
+} q2dbrushside_t;
+
+typedef struct q2dbrush_s
+{
+ int firstside;
+ int numsides;
+ int contents;
+} q2dbrush_t;
+
+
+// the visibility lump consists of a header with a count, then
+// byte offsets for the PVS and PHS of each cluster, then the raw
+// compressed bit vectors
+#define Q2DVIS_PVS 0
+#define Q2DVIS_PHS 1
+typedef struct q2dvis_s
+{
+ int numclusters;
+ int bitofs[8][2]; // bitofs[numclusters][2]
+} q2dvis_t;
+
+// each area has a list of portals that lead into other areas
+// when portals are closed, other areas may not be visible or
+// hearable even if the vis info says that it should be
+typedef struct q2dareaportal_s
+{
+ int portalnum;
+ int otherarea;
+} q2dareaportal_t;
+
+typedef struct q2darea_s
+{
+ int numareaportals;
+ int firstareaportal;
+} q2darea_t;
+
+
+//Q3 bsp stuff
+
+#define Q3BSPVERSION 46
+#define Q3BSPVERSION_LIVE 47
+#define Q3BSPVERSION_IG 48
+
+#define Q3LUMP_ENTITIES 0 // entities to spawn (used by server and client)
+#define Q3LUMP_TEXTURES 1 // textures used (used by faces)
+#define Q3LUMP_PLANES 2 // planes used (used by bsp nodes)
+#define Q3LUMP_NODES 3 // bsp nodes (used by bsp nodes, bsp leafs, rendering, collisions)
+#define Q3LUMP_LEAFS 4 // bsp leafs (used by bsp nodes)
+#define Q3LUMP_LEAFFACES 5 // array of ints indexing faces (used by leafs)
+#define Q3LUMP_LEAFBRUSHES 6 // array of ints indexing brushes (used by leafs)
+#define Q3LUMP_MODELS 7 // models (used by rendering, collisions)
+#define Q3LUMP_BRUSHES 8 // brushes (used by effects, collisions)
+#define Q3LUMP_BRUSHSIDES 9 // brush faces (used by brushes)
+#define Q3LUMP_VERTICES 10 // mesh vertices (used by faces)
+#define Q3LUMP_TRIANGLES 11 // mesh triangles (used by faces)
+#define Q3LUMP_EFFECTS 12 // fog (used by faces)
+#define Q3LUMP_FACES 13 // surfaces (used by leafs)
+#define Q3LUMP_LIGHTMAPS 14 // lightmap textures (used by faces)
+#define Q3LUMP_LIGHTGRID 15 // lighting as a voxel grid (used by rendering)
+#define Q3LUMP_PVS 16 // potentially visible set; bit[clusters][clusters] (used by rendering)
+#define Q3HEADER_LUMPS 17
+#define Q3LUMP_ADVERTISEMENTS 17 // quake live stuff written by zeroradiant's q3map2 (ignored by DP)
+#define Q3HEADER_LUMPS_LIVE 18
+#define Q3HEADER_LUMPS_MAX 18
+
+typedef struct q3dheader_s
+{
+ int ident;
+ int version;
+ lump_t lumps[Q3HEADER_LUMPS_MAX];
+} q3dheader_t;
+
+typedef struct q3dtexture_s
+{
+ char name[Q3PATHLENGTH];
+ int surfaceflags;
+ int contents;
+}
+q3dtexture_t;
+
+// note: planes are paired, the pair of planes with i and i ^ 1 are opposites.
+typedef struct q3dplane_s
+{
+ float normal[3];
+ float dist;
+}
+q3dplane_t;
+
+typedef struct q3dnode_s
+{
+ int planeindex;
+ int childrenindex[2];
+ int mins[3];
+ int maxs[3];