3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project.
6 # All text after a double hash (##) is considered a comment and is placed in
7 # front of the TAG it is preceding.
9 # All text after a single hash (#) is considered a comment and will be ignored.
11 # TAG = value [value, ...]
12 # For lists, items can also be appended using:
13 # TAG += value [value, ...]
14 # Values that contain spaces should be placed between quotes (\" \").
16 #---------------------------------------------------------------------------
17 # Project related configuration options
18 #---------------------------------------------------------------------------
20 # This tag specifies the encoding used for all characters in the config file
21 # that follow. The default is UTF-8 which is also the encoding used for all text
22 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
23 # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
24 # for the list of possible encodings.
25 # The default value is: UTF-8.
27 DOXYFILE_ENCODING = UTF-8
29 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
30 # double-quotes, unless you are using Doxywizard) that should identify the
31 # project for which the documentation is generated. This name is used in the
32 # title of most generated pages and in a few other places.
33 # The default value is: My Project.
35 PROJECT_NAME = "Xonotic"
37 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
38 # could be handy for archiving the generated documentation or if some version
39 # control system is used.
43 # Using the PROJECT_BRIEF tag one can provide an optional one line description
44 # for a project that appears at the top of each page and should give viewer a
45 # quick idea about the purpose of the project. Keep the description short.
49 # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
50 # in the documentation. The maximum height of the logo should not exceed 55
51 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
52 # the logo to the output directory.
56 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
57 # into which the generated documentation will be written. If a relative path is
58 # entered, it will be relative to the location where doxygen was started. If
59 # left blank the current directory will be used.
63 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
64 # directories (in 2 levels) under the output directory of each output format and
65 # will distribute the generated files over these directories. Enabling this
66 # option can be useful when feeding doxygen a huge amount of source files, where
67 # putting all generated files in the same directory would otherwise causes
68 # performance problems for the file system.
69 # The default value is: NO.
73 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
74 # characters to appear in the names of generated files. If set to NO, non-ASCII
75 # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
77 # The default value is: NO.
79 ALLOW_UNICODE_NAMES = NO
81 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
82 # documentation generated by doxygen is written. Doxygen will use this
83 # information to generate all constant output in the proper language.
84 # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
85 # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
86 # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
87 # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
88 # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
89 # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
90 # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
91 # Ukrainian and Vietnamese.
92 # The default value is: English.
94 OUTPUT_LANGUAGE = English
96 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
97 # descriptions after the members that are listed in the file and class
98 # documentation (similar to Javadoc). Set to NO to disable this.
99 # The default value is: YES.
101 BRIEF_MEMBER_DESC = YES
103 # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
104 # description of a member or function before the detailed description
106 # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
107 # brief descriptions will be completely suppressed.
108 # The default value is: YES.
112 # This tag implements a quasi-intelligent brief description abbreviator that is
113 # used to form the text in various listings. Each string in this list, if found
114 # as the leading text of the brief description, will be stripped from the text
115 # and the result, after processing the whole list, is used as the annotated
116 # text. Otherwise, the brief description is used as-is. If left blank, the
117 # following values are used ($name is automatically replaced with the name of
118 # the entity):The $name class, The $name widget, The $name file, is, provides,
119 # specifies, contains, represents, a, an and the.
123 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
124 # doxygen will generate a detailed section even if there is only a brief
126 # The default value is: NO.
128 ALWAYS_DETAILED_SEC = YES
130 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
131 # inherited members of a class in the documentation of that class as if those
132 # members were ordinary class members. Constructors, destructors and assignment
133 # operators of the base classes will not be shown.
134 # The default value is: NO.
136 INLINE_INHERITED_MEMB = YES
138 # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
139 # before files name in the file list and in the header files. If set to NO the
140 # shortest path that makes the file name unique will be used
141 # The default value is: YES.
143 FULL_PATH_NAMES = YES
145 # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
146 # Stripping is only done if one of the specified strings matches the left-hand
147 # part of the path. The tag can be used to show relative paths in the file list.
148 # If left blank the directory from which doxygen is run is used as the path to
151 # Note that you can specify absolute paths here, but also relative paths, which
152 # will be relative from the directory where doxygen is started.
153 # This tag requires that the tag FULL_PATH_NAMES is set to YES.
157 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
158 # path mentioned in the documentation of a class, which tells the reader which
159 # header file to include in order to use a class. If left blank only the name of
160 # the header file containing the class definition is used. Otherwise one should
161 # specify the list of include paths that are normally passed to the compiler
164 STRIP_FROM_INC_PATH =
166 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
167 # less readable) file names. This can be useful is your file systems doesn't
168 # support long names like on DOS, Mac, or CD-ROM.
169 # The default value is: NO.
173 # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
174 # first line (until the first dot) of a Javadoc-style comment as the brief
175 # description. If set to NO, the Javadoc-style will behave just like regular Qt-
176 # style comments (thus requiring an explicit @brief command for a brief
178 # The default value is: NO.
180 JAVADOC_AUTOBRIEF = YES
182 # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
183 # line (until the first dot) of a Qt-style comment as the brief description. If
184 # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
185 # requiring an explicit \brief command for a brief description.)
186 # The default value is: NO.
190 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
191 # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
192 # a brief description. This used to be the default behavior. The new default is
193 # to treat a multi-line C++ comment block as a detailed description. Set this
194 # tag to YES if you prefer the old behavior instead.
196 # Note that setting this tag to YES also means that rational rose comments are
197 # not recognized any more.
198 # The default value is: NO.
200 MULTILINE_CPP_IS_BRIEF = NO
202 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
203 # documentation from any documented member that it re-implements.
204 # The default value is: YES.
208 # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
209 # page for each member. If set to NO, the documentation of a member will be part
210 # of the file/class/namespace that contains it.
211 # The default value is: NO.
213 SEPARATE_MEMBER_PAGES = NO
215 # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
216 # uses this value to replace tabs by spaces in code fragments.
217 # Minimum value: 1, maximum value: 16, default value: 4.
221 # This tag can be used to specify a number of aliases that act as commands in
222 # the documentation. An alias has the form:
225 # "sideeffect=@par Side Effects:\n"
226 # will allow you to put the command \sideeffect (or @sideeffect) in the
227 # documentation, which will result in a user-defined paragraph with heading
228 # "Side Effects:". You can put \n's in the value part of an alias to insert
233 # This tag can be used to specify a number of word-keyword mappings (TCL only).
234 # A mapping has the form "name=value". For example adding "class=itcl::class"
235 # will allow you to use the command class in the itcl::class meaning.
239 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
240 # only. Doxygen will then generate output that is more tailored for C. For
241 # instance, some of the names that are used will be different. The list of all
242 # members will be omitted, etc.
243 # The default value is: NO.
245 OPTIMIZE_OUTPUT_FOR_C = NO
247 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
248 # Python sources only. Doxygen will then generate output that is more tailored
249 # for that language. For instance, namespaces will be presented as packages,
250 # qualified scopes will look different, etc.
251 # The default value is: NO.
253 OPTIMIZE_OUTPUT_JAVA = NO
255 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
256 # sources. Doxygen will then generate output that is tailored for Fortran.
257 # The default value is: NO.
259 OPTIMIZE_FOR_FORTRAN = NO
261 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
262 # sources. Doxygen will then generate output that is tailored for VHDL.
263 # The default value is: NO.
265 OPTIMIZE_OUTPUT_VHDL = NO
267 # Doxygen selects the parser to use depending on the extension of the files it
268 # parses. With this tag you can assign which parser to use for a given
269 # extension. Doxygen has a built-in mapping, but you can override or extend it
270 # using this tag. The format is ext=language, where ext is a file extension, and
271 # language is one of the parsers supported by doxygen: IDL, Java, Javascript,
272 # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
273 # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
274 # Fortran. In the later case the parser tries to guess whether the code is fixed
275 # or free formatted code, this is the default for Fortran type files), VHDL. For
276 # instance to make doxygen treat .inc files as Fortran files (default is PHP),
277 # and .f files as C (default is Fortran), use: inc=Fortran f=C.
279 # Note: For files without extension you can use no_extension as a placeholder.
281 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
282 # the files are not read by doxygen.
284 EXTENSION_MAPPING = qc=C qh=C inc=C
286 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
287 # according to the Markdown format, which allows for more readable
288 # documentation. See http://daringfireball.net/projects/markdown/ for details.
289 # The output of markdown processing is further processed by doxygen, so you can
290 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
291 # case of backward compatibilities issues.
292 # The default value is: YES.
294 MARKDOWN_SUPPORT = YES
296 # When enabled doxygen tries to link words that correspond to documented
297 # classes, or namespaces to their corresponding documentation. Such a link can
298 # be prevented in individual cases by putting a % sign in front of the word or
299 # globally by setting AUTOLINK_SUPPORT to NO.
300 # The default value is: YES.
302 AUTOLINK_SUPPORT = YES
304 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
305 # to include (a tag file for) the STL sources as input, then you should set this
306 # tag to YES in order to let doxygen match functions declarations and
307 # definitions whose arguments contain STL classes (e.g. func(std::string);
308 # versus func(std::string) {}). This also make the inheritance and collaboration
309 # diagrams that involve STL classes more complete and accurate.
310 # The default value is: NO.
312 BUILTIN_STL_SUPPORT = NO
314 # If you use Microsoft's C++/CLI language, you should set this option to YES to
315 # enable parsing support.
316 # The default value is: NO.
320 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
321 # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
322 # will parse them like normal C++ but will assume all classes use public instead
323 # of private inheritance when no explicit protection keyword is present.
324 # The default value is: NO.
328 # For Microsoft's IDL there are propget and propput attributes to indicate
329 # getter and setter methods for a property. Setting this option to YES will make
330 # doxygen to replace the get and set methods by a property in the documentation.
331 # This will only work if the methods are indeed getting or setting a simple
332 # type. If this is not the case, or you want to show the methods anyway, you
333 # should set this option to NO.
334 # The default value is: YES.
336 IDL_PROPERTY_SUPPORT = YES
338 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
339 # tag is set to YES then doxygen will reuse the documentation of the first
340 # member in the group (if any) for the other members of the group. By default
341 # all members of a group must be documented explicitly.
342 # The default value is: NO.
344 DISTRIBUTE_GROUP_DOC = NO
346 # If one adds a struct or class to a group and this option is enabled, then also
347 # any nested class or struct is added to the same group. By default this option
348 # is disabled and one has to add nested compounds explicitly via \ingroup.
349 # The default value is: NO.
351 GROUP_NESTED_COMPOUNDS = NO
353 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
354 # (for instance a group of public functions) to be put as a subgroup of that
355 # type (e.g. under the Public Functions section). Set it to NO to prevent
356 # subgrouping. Alternatively, this can be done per class using the
357 # \nosubgrouping command.
358 # The default value is: YES.
362 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
363 # are shown inside the group in which they are included (e.g. using \ingroup)
364 # instead of on a separate page (for HTML and Man pages) or section (for LaTeX
367 # Note that this feature does not work in combination with
368 # SEPARATE_MEMBER_PAGES.
369 # The default value is: NO.
371 INLINE_GROUPED_CLASSES = NO
373 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
374 # with only public data fields or simple typedef fields will be shown inline in
375 # the documentation of the scope in which they are defined (i.e. file,
376 # namespace, or group documentation), provided this scope is documented. If set
377 # to NO, structs, classes, and unions are shown on a separate page (for HTML and
378 # Man pages) or section (for LaTeX and RTF).
379 # The default value is: NO.
381 INLINE_SIMPLE_STRUCTS = NO
383 # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
384 # enum is documented as struct, union, or enum with the name of the typedef. So
385 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
386 # with name TypeT. When disabled the typedef will appear as a member of a file,
387 # namespace, or class. And the struct will be named TypeS. This can typically be
388 # useful for C code in case the coding convention dictates that all compound
389 # types are typedef'ed and only the typedef is referenced, never the tag name.
390 # The default value is: NO.
392 TYPEDEF_HIDES_STRUCT = YES
394 # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
395 # cache is used to resolve symbols given their name and scope. Since this can be
396 # an expensive process and often the same symbol appears multiple times in the
397 # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
398 # doxygen will become slower. If the cache is too large, memory is wasted. The
399 # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
400 # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
401 # symbols. At the end of a run doxygen will report the cache usage and suggest
402 # the optimal cache size from a speed point of view.
403 # Minimum value: 0, maximum value: 9, default value: 0.
405 LOOKUP_CACHE_SIZE = 0
407 #---------------------------------------------------------------------------
408 # Build related configuration options
409 #---------------------------------------------------------------------------
411 # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
412 # documentation are documented, even if no documentation was available. Private
413 # class members and static file members will be hidden unless the
414 # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
415 # Note: This will also disable the warnings about undocumented members that are
416 # normally produced when WARNINGS is set to YES.
417 # The default value is: NO.
421 # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
422 # be included in the documentation.
423 # The default value is: NO.
425 EXTRACT_PRIVATE = YES
427 # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
428 # scope will be included in the documentation.
429 # The default value is: NO.
431 EXTRACT_PACKAGE = YES
433 # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
434 # included in the documentation.
435 # The default value is: NO.
439 # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
440 # locally in source files will be included in the documentation. If set to NO,
441 # only classes defined in header files are included. Does not have any effect
443 # The default value is: YES.
445 EXTRACT_LOCAL_CLASSES = YES
447 # This flag is only useful for Objective-C code. If set to YES, local methods,
448 # which are defined in the implementation section but not in the interface are
449 # included in the documentation. If set to NO, only methods in the interface are
451 # The default value is: NO.
453 EXTRACT_LOCAL_METHODS = YES
455 # If this flag is set to YES, the members of anonymous namespaces will be
456 # extracted and appear in the documentation as a namespace called
457 # 'anonymous_namespace{file}', where file will be replaced with the base name of
458 # the file that contains the anonymous namespace. By default anonymous namespace
460 # The default value is: NO.
462 EXTRACT_ANON_NSPACES = YES
464 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
465 # undocumented members inside documented classes or files. If set to NO these
466 # members will be included in the various overviews, but no documentation
467 # section is generated. This option has no effect if EXTRACT_ALL is enabled.
468 # The default value is: NO.
470 HIDE_UNDOC_MEMBERS = NO
472 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
473 # undocumented classes that are normally visible in the class hierarchy. If set
474 # to NO, these classes will be included in the various overviews. This option
475 # has no effect if EXTRACT_ALL is enabled.
476 # The default value is: NO.
478 HIDE_UNDOC_CLASSES = NO
480 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
481 # (class|struct|union) declarations. If set to NO, these declarations will be
482 # included in the documentation.
483 # The default value is: NO.
485 HIDE_FRIEND_COMPOUNDS = NO
487 # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
488 # documentation blocks found inside the body of a function. If set to NO, these
489 # blocks will be appended to the function's detailed documentation block.
490 # The default value is: NO.
492 HIDE_IN_BODY_DOCS = NO
494 # The INTERNAL_DOCS tag determines if documentation that is typed after a
495 # \internal command is included. If the tag is set to NO then the documentation
496 # will be excluded. Set it to YES to include the internal documentation.
497 # The default value is: NO.
501 # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
502 # names in lower-case letters. If set to YES, upper-case letters are also
503 # allowed. This is useful if you have classes or files whose names only differ
504 # in case and if your file system supports case sensitive file names. Windows
505 # and Mac users are advised to set this option to NO.
506 # The default value is: system dependent.
508 CASE_SENSE_NAMES = YES
510 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
511 # their full class and namespace scopes in the documentation. If set to YES, the
512 # scope will be hidden.
513 # The default value is: NO.
515 HIDE_SCOPE_NAMES = NO
517 # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
518 # append additional text to a page's title, such as Class Reference. If set to
519 # YES the compound reference will be hidden.
520 # The default value is: NO.
522 HIDE_COMPOUND_REFERENCE= NO
524 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
525 # the files that are included by a file in the documentation of that file.
526 # The default value is: YES.
528 SHOW_INCLUDE_FILES = YES
530 # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
531 # grouped member an include statement to the documentation, telling the reader
532 # which file to include in order to use the member.
533 # The default value is: NO.
535 SHOW_GROUPED_MEMB_INC = YES
537 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
538 # files with double quotes in the documentation rather than with sharp brackets.
539 # The default value is: NO.
541 FORCE_LOCAL_INCLUDES = NO
543 # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
544 # documentation for inline members.
545 # The default value is: YES.
549 # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
550 # (detailed) documentation of file and class members alphabetically by member
551 # name. If set to NO, the members will appear in declaration order.
552 # The default value is: YES.
554 SORT_MEMBER_DOCS = YES
556 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
557 # descriptions of file, namespace and class members alphabetically by member
558 # name. If set to NO, the members will appear in declaration order. Note that
559 # this will also influence the order of the classes in the class list.
560 # The default value is: NO.
562 SORT_BRIEF_DOCS = YES
564 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
565 # (brief and detailed) documentation of class members so that constructors and
566 # destructors are listed first. If set to NO the constructors will appear in the
567 # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
568 # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
569 # member documentation.
570 # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
571 # detailed member documentation.
572 # The default value is: NO.
574 SORT_MEMBERS_CTORS_1ST = YES
576 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
577 # of group names into alphabetical order. If set to NO the group names will
578 # appear in their defined order.
579 # The default value is: NO.
581 SORT_GROUP_NAMES = NO
583 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
584 # fully-qualified names, including namespaces. If set to NO, the class list will
585 # be sorted only by class name, not including the namespace part.
586 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
587 # Note: This option applies only to the class list, not to the alphabetical
589 # The default value is: NO.
591 SORT_BY_SCOPE_NAME = NO
593 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
594 # type resolution of all parameters of a function it will reject a match between
595 # the prototype and the implementation of a member function even if there is
596 # only one candidate or it is obvious which candidate to choose by doing a
597 # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
598 # accept a match between prototype and implementation in such cases.
599 # The default value is: NO.
601 STRICT_PROTO_MATCHING = NO
603 # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
604 # list. This list is created by putting \todo commands in the documentation.
605 # The default value is: YES.
607 GENERATE_TODOLIST = YES
609 # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
610 # list. This list is created by putting \test commands in the documentation.
611 # The default value is: YES.
613 GENERATE_TESTLIST = YES
615 # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
616 # list. This list is created by putting \bug commands in the documentation.
617 # The default value is: YES.
619 GENERATE_BUGLIST = YES
621 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
622 # the deprecated list. This list is created by putting \deprecated commands in
624 # The default value is: YES.
626 GENERATE_DEPRECATEDLIST= YES
628 # The ENABLED_SECTIONS tag can be used to enable conditional documentation
629 # sections, marked by \if <section_label> ... \endif and \cond <section_label>
630 # ... \endcond blocks.
634 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
635 # initial value of a variable or macro / define can have for it to appear in the
636 # documentation. If the initializer consists of more lines than specified here
637 # it will be hidden. Use a value of 0 to hide initializers completely. The
638 # appearance of the value of individual variables and macros / defines can be
639 # controlled using \showinitializer or \hideinitializer command in the
640 # documentation regardless of this setting.
641 # Minimum value: 0, maximum value: 10000, default value: 30.
643 MAX_INITIALIZER_LINES = 30
645 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
646 # the bottom of the documentation of classes and structs. If set to YES, the
647 # list will mention the files that were used to generate the documentation.
648 # The default value is: YES.
650 SHOW_USED_FILES = YES
652 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
653 # will remove the Files entry from the Quick Index and from the Folder Tree View
655 # The default value is: YES.
659 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
660 # page. This will remove the Namespaces entry from the Quick Index and from the
661 # Folder Tree View (if specified).
662 # The default value is: YES.
664 SHOW_NAMESPACES = YES
666 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
667 # doxygen should invoke to get the current version for each file (typically from
668 # the version control system). Doxygen will invoke the program by executing (via
669 # popen()) the command command input-file, where command is the value of the
670 # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
671 # by doxygen. Whatever the program writes to standard output is used as the file
672 # version. For an example see the documentation.
674 FILE_VERSION_FILTER =
676 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
677 # by doxygen. The layout file controls the global structure of the generated
678 # output files in an output format independent way. To create the layout file
679 # that represents doxygen's defaults, run doxygen with the -l option. You can
680 # optionally specify a file name after the option, if omitted DoxygenLayout.xml
681 # will be used as the name of the layout file.
683 # Note that if you run doxygen from a directory containing a file called
684 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
689 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
690 # the reference definitions. This must be a list of .bib files. The .bib
691 # extension is automatically appended if omitted. This requires the bibtex tool
692 # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
693 # For LaTeX the style of the bibliography can be controlled using
694 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
695 # search path. See also \cite for info how to create references.
699 #---------------------------------------------------------------------------
700 # Configuration options related to warning and progress messages
701 #---------------------------------------------------------------------------
703 # The QUIET tag can be used to turn on/off the messages that are generated to
704 # standard output by doxygen. If QUIET is set to YES this implies that the
706 # The default value is: NO.
710 # The WARNINGS tag can be used to turn on/off the warning messages that are
711 # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
712 # this implies that the warnings are on.
714 # Tip: Turn warnings on while writing the documentation.
715 # The default value is: YES.
719 # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
720 # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
721 # will automatically be disabled.
722 # The default value is: YES.
724 WARN_IF_UNDOCUMENTED = YES
726 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
727 # potential errors in the documentation, such as not documenting some parameters
728 # in a documented function, or documenting parameters that don't exist or using
729 # markup commands wrongly.
730 # The default value is: YES.
732 WARN_IF_DOC_ERROR = YES
734 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
735 # are documented, but have no documentation for their parameters or return
736 # value. If set to NO, doxygen will only warn about wrong or incomplete
737 # parameter documentation, but not about the absence of documentation.
738 # The default value is: NO.
740 WARN_NO_PARAMDOC = NO
742 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
743 # can produce. The string should contain the $file, $line, and $text tags, which
744 # will be replaced by the file and line number from which the warning originated
745 # and the warning text. Optionally the format may contain $version, which will
746 # be replaced by the version of the file (if it could be obtained via
747 # FILE_VERSION_FILTER)
748 # The default value is: $file:$line: $text.
750 WARN_FORMAT = "$file:$line: $text"
752 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
753 # messages should be written. If left blank the output is written to standard
758 #---------------------------------------------------------------------------
759 # Configuration options related to the input files
760 #---------------------------------------------------------------------------
762 # The INPUT tag is used to specify the files and/or directories that contain
763 # documented source files. You may enter file names like myfile.cpp or
764 # directories like /usr/src/myproject. Separate the files or directories with
765 # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
766 # Note: If this tag is empty the current directory is searched.
770 # This tag can be used to specify the character encoding of the source files
771 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
772 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
773 # documentation (see: http://www.gnu.org/software/libiconv) for the list of
774 # possible encodings.
775 # The default value is: UTF-8.
777 INPUT_ENCODING = UTF-8
779 # If the value of the INPUT tag contains directories, you can use the
780 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
781 # *.h) to filter out the source-files in the directories.
783 # Note that for custom extensions or not directly supported extensions you also
784 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
787 # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
788 # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
789 # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
790 # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd,
791 # *.vhdl, *.ucf, *.qsf, *.as and *.js.
793 FILE_PATTERNS = *.qc *.qh *.inc
795 # The RECURSIVE tag can be used to specify whether or not subdirectories should
796 # be searched for input files as well.
797 # The default value is: NO.
801 # The EXCLUDE tag can be used to specify files and/or directories that should be
802 # excluded from the INPUT source files. This way you can easily exclude a
803 # subdirectory from a directory tree whose root is specified with the INPUT tag.
805 # Note that relative paths are relative to the directory from which doxygen is
810 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
811 # directories that are symbolic links (a Unix file system feature) are excluded
813 # The default value is: NO.
815 EXCLUDE_SYMLINKS = NO
817 # If the value of the INPUT tag contains directories, you can use the
818 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
819 # certain files from those directories.
821 # Note that the wildcards are matched against the file with absolute path, so to
822 # exclude all test directories for example use the pattern */test/*
826 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
827 # (namespaces, classes, functions, etc.) that should be excluded from the
828 # output. The symbol name can be a fully qualified name, a word, or if the
829 # wildcard * is used, a substring. Examples: ANamespace, AClass,
830 # AClass::ANamespace, ANamespace::*Test
832 # Note that the wildcards are matched against the file with absolute path, so to
833 # exclude all test directories use the pattern */test/*
837 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
838 # that contain example code fragments that are included (see the \include
843 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
844 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
845 # *.h) to filter out the source-files in the directories. If left blank all
846 # files are included.
850 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
851 # searched for input files to be used with the \include or \dontinclude commands
852 # irrespective of the value of the RECURSIVE tag.
853 # The default value is: NO.
855 EXAMPLE_RECURSIVE = NO
857 # The IMAGE_PATH tag can be used to specify one or more files or directories
858 # that contain images that are to be included in the documentation (see the
863 # The INPUT_FILTER tag can be used to specify a program that doxygen should
864 # invoke to filter for each input file. Doxygen will invoke the filter program
865 # by executing (via popen()) the command:
867 # <filter> <input-file>
869 # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
870 # name of an input file. Doxygen will then use the output that the filter
871 # program writes to standard output. If FILTER_PATTERNS is specified, this tag
874 # Note that the filter must not add or remove lines; it is applied before the
875 # code is scanned, but not when the output code is generated. If lines are added
876 # or removed, the anchors will not be placed correctly.
880 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
881 # basis. Doxygen will compare the file name with each pattern and apply the
882 # filter if there is a match. The filters are a list of the form: pattern=filter
883 # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
884 # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
885 # patterns match the file name, INPUT_FILTER is applied.
889 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
890 # INPUT_FILTER) will also be used to filter the input files that are used for
891 # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
892 # The default value is: NO.
894 FILTER_SOURCE_FILES = NO
896 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
897 # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
898 # it is also possible to disable source filtering for a specific pattern using
899 # *.ext= (so without naming a filter).
900 # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
902 FILTER_SOURCE_PATTERNS =
904 # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
905 # is part of the input, its contents will be placed on the main page
906 # (index.html). This can be useful if you have a project on for instance GitHub
907 # and want to reuse the introduction page also for the doxygen output.
909 USE_MDFILE_AS_MAINPAGE =
911 #---------------------------------------------------------------------------
912 # Configuration options related to source browsing
913 #---------------------------------------------------------------------------
915 # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
916 # generated. Documented entities will be cross-referenced with these sources.
918 # Note: To get rid of all source code in the generated output, make sure that
919 # also VERBATIM_HEADERS is set to NO.
920 # The default value is: NO.
924 # Setting the INLINE_SOURCES tag to YES will include the body of functions,
925 # classes and enums directly into the documentation.
926 # The default value is: NO.
930 # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
931 # special comment blocks from generated source code fragments. Normal C, C++ and
932 # Fortran comments will always remain visible.
933 # The default value is: YES.
935 STRIP_CODE_COMMENTS = YES
937 # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
938 # function all documented functions referencing it will be listed.
939 # The default value is: NO.
941 REFERENCED_BY_RELATION = YES
943 # If the REFERENCES_RELATION tag is set to YES then for each documented function
944 # all documented entities called/used by that function will be listed.
945 # The default value is: NO.
947 REFERENCES_RELATION = YES
949 # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
950 # to YES then the hyperlinks from functions in REFERENCES_RELATION and
951 # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
952 # link to the documentation.
953 # The default value is: YES.
955 REFERENCES_LINK_SOURCE = YES
957 # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
958 # source code will show a tooltip with additional information such as prototype,
959 # brief description and links to the definition and documentation. Since this
960 # will make the HTML file larger and loading of large files a bit slower, you
961 # can opt to disable this feature.
962 # The default value is: YES.
963 # This tag requires that the tag SOURCE_BROWSER is set to YES.
965 SOURCE_TOOLTIPS = YES
967 # If the USE_HTAGS tag is set to YES then the references to source code will
968 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
969 # source browser. The htags tool is part of GNU's global source tagging system
970 # (see http://www.gnu.org/software/global/global.html). You will need version
973 # To use it do the following:
974 # - Install the latest version of global
975 # - Enable SOURCE_BROWSER and USE_HTAGS in the config file
976 # - Make sure the INPUT points to the root of the source tree
977 # - Run doxygen as normal
979 # Doxygen will invoke htags (and that will in turn invoke gtags), so these
980 # tools must be available from the command line (i.e. in the search path).
982 # The result: instead of the source browser generated by doxygen, the links to
983 # source code will now point to the output of htags.
984 # The default value is: NO.
985 # This tag requires that the tag SOURCE_BROWSER is set to YES.
989 # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
990 # verbatim copy of the header file for each class for which an include is
991 # specified. Set to NO to disable this.
992 # See also: Section \class.
993 # The default value is: YES.
995 VERBATIM_HEADERS = YES
997 #---------------------------------------------------------------------------
998 # Configuration options related to the alphabetical class index
999 #---------------------------------------------------------------------------
1001 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
1002 # compounds will be generated. Enable this if the project contains a lot of
1003 # classes, structs, unions or interfaces.
1004 # The default value is: YES.
1006 ALPHABETICAL_INDEX = YES
1008 # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
1009 # which the alphabetical index list will be split.
1010 # Minimum value: 1, maximum value: 20, default value: 5.
1011 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1013 COLS_IN_ALPHA_INDEX = 5
1015 # In case all classes in a project start with a common prefix, all classes will
1016 # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
1017 # can be used to specify a prefix (or a list of prefixes) that should be ignored
1018 # while generating the index headers.
1019 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1023 #---------------------------------------------------------------------------
1024 # Configuration options related to the HTML output
1025 #---------------------------------------------------------------------------
1027 # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
1028 # The default value is: YES.
1032 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
1033 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1035 # The default directory is: html.
1036 # This tag requires that the tag GENERATE_HTML is set to YES.
1040 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
1041 # generated HTML page (for example: .htm, .php, .asp).
1042 # The default value is: .html.
1043 # This tag requires that the tag GENERATE_HTML is set to YES.
1045 HTML_FILE_EXTENSION = .html
1047 # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1048 # each generated HTML page. If the tag is left blank doxygen will generate a
1051 # To get valid HTML the header file that includes any scripts and style sheets
1052 # that doxygen needs, which is dependent on the configuration options used (e.g.
1053 # the setting GENERATE_TREEVIEW). It is highly recommended to start with a
1054 # default header using
1055 # doxygen -w html new_header.html new_footer.html new_stylesheet.css
1057 # and then modify the file new_header.html. See also section "Doxygen usage"
1058 # for information on how to generate the default header that doxygen normally
1060 # Note: The header is subject to change so you typically have to regenerate the
1061 # default header when upgrading to a newer version of doxygen. For a description
1062 # of the possible markers and block names see the documentation.
1063 # This tag requires that the tag GENERATE_HTML is set to YES.
1067 # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1068 # generated HTML page. If the tag is left blank doxygen will generate a standard
1069 # footer. See HTML_HEADER for more information on how to generate a default
1070 # footer and what special commands can be used inside the footer. See also
1071 # section "Doxygen usage" for information on how to generate the default footer
1072 # that doxygen normally uses.
1073 # This tag requires that the tag GENERATE_HTML is set to YES.
1077 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1078 # sheet that is used by each HTML page. It can be used to fine-tune the look of
1079 # the HTML output. If left blank doxygen will generate a default style sheet.
1080 # See also section "Doxygen usage" for information on how to generate the style
1081 # sheet that doxygen normally uses.
1082 # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
1083 # it is more robust and this tag (HTML_STYLESHEET) will in the future become
1085 # This tag requires that the tag GENERATE_HTML is set to YES.
1089 # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1090 # cascading style sheets that are included after the standard style sheets
1091 # created by doxygen. Using this option one can overrule certain style aspects.
1092 # This is preferred over using HTML_STYLESHEET since it does not replace the
1093 # standard style sheet and is therefore more robust against future updates.
1094 # Doxygen will copy the style sheet files to the output directory.
1095 # Note: The order of the extra style sheet files is of importance (e.g. the last
1096 # style sheet in the list overrules the setting of the previous ones in the
1097 # list). For an example see the documentation.
1098 # This tag requires that the tag GENERATE_HTML is set to YES.
1100 HTML_EXTRA_STYLESHEET =
1102 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
1103 # other source files which should be copied to the HTML output directory. Note
1104 # that these files will be copied to the base HTML output directory. Use the
1105 # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1106 # files. In the HTML_STYLESHEET file, use the file name only. Also note that the
1107 # files will be copied as-is; there are no commands or markers available.
1108 # This tag requires that the tag GENERATE_HTML is set to YES.
1112 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
1113 # will adjust the colors in the style sheet and background images according to
1114 # this color. Hue is specified as an angle on a colorwheel, see
1115 # http://en.wikipedia.org/wiki/Hue for more information. For instance the value
1116 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
1117 # purple, and 360 is red again.
1118 # Minimum value: 0, maximum value: 359, default value: 220.
1119 # This tag requires that the tag GENERATE_HTML is set to YES.
1121 HTML_COLORSTYLE_HUE = 220
1123 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
1124 # in the HTML output. For a value of 0 the output will use grayscales only. A
1125 # value of 255 will produce the most vivid colors.
1126 # Minimum value: 0, maximum value: 255, default value: 100.
1127 # This tag requires that the tag GENERATE_HTML is set to YES.
1129 HTML_COLORSTYLE_SAT = 100
1131 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
1132 # luminance component of the colors in the HTML output. Values below 100
1133 # gradually make the output lighter, whereas values above 100 make the output
1134 # darker. The value divided by 100 is the actual gamma applied, so 80 represents
1135 # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
1137 # Minimum value: 40, maximum value: 240, default value: 80.
1138 # This tag requires that the tag GENERATE_HTML is set to YES.
1140 HTML_COLORSTYLE_GAMMA = 80
1142 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1143 # page will contain the date and time when the page was generated. Setting this
1144 # to YES can help to show when doxygen was last run and thus if the
1145 # documentation is up to date.
1146 # The default value is: NO.
1147 # This tag requires that the tag GENERATE_HTML is set to YES.
1149 HTML_TIMESTAMP = YES
1151 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1152 # documentation will contain sections that can be hidden and shown after the
1154 # The default value is: NO.
1155 # This tag requires that the tag GENERATE_HTML is set to YES.
1157 HTML_DYNAMIC_SECTIONS = YES
1159 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
1160 # shown in the various tree structured indices initially; the user can expand
1161 # and collapse entries dynamically later on. Doxygen will expand the tree to
1162 # such a level that at most the specified number of entries are visible (unless
1163 # a fully collapsed tree already exceeds this amount). So setting the number of
1164 # entries 1 will produce a full collapsed tree by default. 0 is a special value
1165 # representing an infinite number of entries and will result in a full expanded
1167 # Minimum value: 0, maximum value: 9999, default value: 100.
1168 # This tag requires that the tag GENERATE_HTML is set to YES.
1170 HTML_INDEX_NUM_ENTRIES = 100
1172 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
1173 # generated that can be used as input for Apple's Xcode 3 integrated development
1174 # environment (see: http://developer.apple.com/tools/xcode/), introduced with
1175 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
1176 # Makefile in the HTML output directory. Running make will produce the docset in
1177 # that directory and running make install will install the docset in
1178 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
1179 # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1180 # for more information.
1181 # The default value is: NO.
1182 # This tag requires that the tag GENERATE_HTML is set to YES.
1184 GENERATE_DOCSET = NO
1186 # This tag determines the name of the docset feed. A documentation feed provides
1187 # an umbrella under which multiple documentation sets from a single provider
1188 # (such as a company or product suite) can be grouped.
1189 # The default value is: Doxygen generated docs.
1190 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1192 DOCSET_FEEDNAME = "Doxygen generated docs"
1194 # This tag specifies a string that should uniquely identify the documentation
1195 # set bundle. This should be a reverse domain-name style string, e.g.
1196 # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
1197 # The default value is: org.doxygen.Project.
1198 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1200 DOCSET_BUNDLE_ID = org.doxygen.Project
1202 # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
1203 # the documentation publisher. This should be a reverse domain-name style
1204 # string, e.g. com.mycompany.MyDocSet.documentation.
1205 # The default value is: org.doxygen.Publisher.
1206 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1208 DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1210 # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
1211 # The default value is: Publisher.
1212 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1214 DOCSET_PUBLISHER_NAME = Publisher
1216 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1217 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
1218 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
1219 # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
1222 # The HTML Help Workshop contains a compiler that can convert all HTML output
1223 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
1224 # files are now used as the Windows 98 help format, and will replace the old
1225 # Windows help format (.hlp) on all Windows platforms in the future. Compressed
1226 # HTML files also contain an index, a table of contents, and you can search for
1227 # words in the documentation. The HTML workshop also contains a viewer for
1228 # compressed HTML files.
1229 # The default value is: NO.
1230 # This tag requires that the tag GENERATE_HTML is set to YES.
1232 GENERATE_HTMLHELP = NO
1234 # The CHM_FILE tag can be used to specify the file name of the resulting .chm
1235 # file. You can add a path in front of the file if the result should not be
1236 # written to the html output directory.
1237 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1241 # The HHC_LOCATION tag can be used to specify the location (absolute path
1242 # including file name) of the HTML help compiler (hhc.exe). If non-empty,
1243 # doxygen will try to run the HTML help compiler on the generated index.hhp.
1244 # The file has to be specified with full path.
1245 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1249 # The GENERATE_CHI flag controls if a separate .chi index file is generated
1250 # (YES) or that it should be included in the master .chm file (NO).
1251 # The default value is: NO.
1252 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1256 # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
1257 # and project file content.
1258 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1260 CHM_INDEX_ENCODING =
1262 # The BINARY_TOC flag controls whether a binary table of contents is generated
1263 # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
1264 # enables the Previous and Next buttons.
1265 # The default value is: NO.
1266 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1270 # The TOC_EXPAND flag can be set to YES to add extra items for group members to
1271 # the table of contents of the HTML help documentation and to the tree view.
1272 # The default value is: NO.
1273 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1277 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1278 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
1279 # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
1280 # (.qch) of the generated HTML documentation.
1281 # The default value is: NO.
1282 # This tag requires that the tag GENERATE_HTML is set to YES.
1286 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
1287 # the file name of the resulting .qch file. The path specified is relative to
1288 # the HTML output folder.
1289 # This tag requires that the tag GENERATE_QHP is set to YES.
1293 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
1294 # Project output. For more information please see Qt Help Project / Namespace
1295 # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
1296 # The default value is: org.doxygen.Project.
1297 # This tag requires that the tag GENERATE_QHP is set to YES.
1299 QHP_NAMESPACE = org.doxygen.Project
1301 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
1302 # Help Project output. For more information please see Qt Help Project / Virtual
1303 # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
1305 # The default value is: doc.
1306 # This tag requires that the tag GENERATE_QHP is set to YES.
1308 QHP_VIRTUAL_FOLDER = doc
1310 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
1311 # filter to add. For more information please see Qt Help Project / Custom
1312 # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1314 # This tag requires that the tag GENERATE_QHP is set to YES.
1316 QHP_CUST_FILTER_NAME =
1318 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
1319 # custom filter to add. For more information please see Qt Help Project / Custom
1320 # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1322 # This tag requires that the tag GENERATE_QHP is set to YES.
1324 QHP_CUST_FILTER_ATTRS =
1326 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1327 # project's filter section matches. Qt Help Project / Filter Attributes (see:
1328 # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
1329 # This tag requires that the tag GENERATE_QHP is set to YES.
1331 QHP_SECT_FILTER_ATTRS =
1333 # The QHG_LOCATION tag can be used to specify the location of Qt's
1334 # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
1335 # generated .qhp file.
1336 # This tag requires that the tag GENERATE_QHP is set to YES.
1340 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1341 # generated, together with the HTML files, they form an Eclipse help plugin. To
1342 # install this plugin and make it available under the help contents menu in
1343 # Eclipse, the contents of the directory containing the HTML and XML files needs
1344 # to be copied into the plugins directory of eclipse. The name of the directory
1345 # within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
1346 # After copying Eclipse needs to be restarted before the help appears.
1347 # The default value is: NO.
1348 # This tag requires that the tag GENERATE_HTML is set to YES.
1350 GENERATE_ECLIPSEHELP = NO
1352 # A unique identifier for the Eclipse help plugin. When installing the plugin
1353 # the directory name containing the HTML and XML files should also have this
1354 # name. Each documentation set should have its own identifier.
1355 # The default value is: org.doxygen.Project.
1356 # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
1358 ECLIPSE_DOC_ID = org.doxygen.Project
1360 # If you want full control over the layout of the generated HTML pages it might
1361 # be necessary to disable the index and replace it with your own. The
1362 # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
1363 # of each HTML page. A value of NO enables the index and the value YES disables
1364 # it. Since the tabs in the index contain the same information as the navigation
1365 # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
1366 # The default value is: NO.
1367 # This tag requires that the tag GENERATE_HTML is set to YES.
1371 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1372 # structure should be generated to display hierarchical information. If the tag
1373 # value is set to YES, a side panel will be generated containing a tree-like
1374 # index structure (just like the one that is generated for HTML Help). For this
1375 # to work a browser that supports JavaScript, DHTML, CSS and frames is required
1376 # (i.e. any modern browser). Windows users are probably better off using the
1377 # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
1378 # further fine-tune the look of the index. As an example, the default style
1379 # sheet generated by doxygen has an example that shows how to put an image at
1380 # the root of the tree instead of the PROJECT_NAME. Since the tree basically has
1381 # the same information as the tab index, you could consider setting
1382 # DISABLE_INDEX to YES when enabling this option.
1383 # The default value is: NO.
1384 # This tag requires that the tag GENERATE_HTML is set to YES.
1386 GENERATE_TREEVIEW = YES
1388 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
1389 # doxygen will group on one line in the generated HTML documentation.
1391 # Note that a value of 0 will completely suppress the enum values from appearing
1392 # in the overview section.
1393 # Minimum value: 0, maximum value: 20, default value: 4.
1394 # This tag requires that the tag GENERATE_HTML is set to YES.
1396 ENUM_VALUES_PER_LINE = 4
1398 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
1399 # to set the initial width (in pixels) of the frame in which the tree is shown.
1400 # Minimum value: 0, maximum value: 1500, default value: 250.
1401 # This tag requires that the tag GENERATE_HTML is set to YES.
1403 TREEVIEW_WIDTH = 250
1405 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
1406 # external symbols imported via tag files in a separate window.
1407 # The default value is: NO.
1408 # This tag requires that the tag GENERATE_HTML is set to YES.
1410 EXT_LINKS_IN_WINDOW = NO
1412 # Use this tag to change the font size of LaTeX formulas included as images in
1413 # the HTML documentation. When you change the font size after a successful
1414 # doxygen run you need to manually remove any form_*.png images from the HTML
1415 # output directory to force them to be regenerated.
1416 # Minimum value: 8, maximum value: 50, default value: 10.
1417 # This tag requires that the tag GENERATE_HTML is set to YES.
1419 FORMULA_FONTSIZE = 10
1421 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
1422 # generated for formulas are transparent PNGs. Transparent PNGs are not
1423 # supported properly for IE 6.0, but are supported on all modern browsers.
1425 # Note that when changing this option you need to delete any form_*.png files in
1426 # the HTML output directory before the changes have effect.
1427 # The default value is: YES.
1428 # This tag requires that the tag GENERATE_HTML is set to YES.
1430 FORMULA_TRANSPARENT = YES
1432 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
1433 # http://www.mathjax.org) which uses client side Javascript for the rendering
1434 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
1435 # installed or if you want to formulas look prettier in the HTML output. When
1436 # enabled you may also need to install MathJax separately and configure the path
1437 # to it using the MATHJAX_RELPATH option.
1438 # The default value is: NO.
1439 # This tag requires that the tag GENERATE_HTML is set to YES.
1443 # When MathJax is enabled you can set the default output format to be used for
1444 # the MathJax output. See the MathJax site (see:
1445 # http://docs.mathjax.org/en/latest/output.html) for more details.
1446 # Possible values are: HTML-CSS (which is slower, but has the best
1447 # compatibility), NativeMML (i.e. MathML) and SVG.
1448 # The default value is: HTML-CSS.
1449 # This tag requires that the tag USE_MATHJAX is set to YES.
1451 MATHJAX_FORMAT = HTML-CSS
1453 # When MathJax is enabled you need to specify the location relative to the HTML
1454 # output directory using the MATHJAX_RELPATH option. The destination directory
1455 # should contain the MathJax.js script. For instance, if the mathjax directory
1456 # is located at the same level as the HTML output directory, then
1457 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
1458 # Content Delivery Network so you can quickly see the result without installing
1459 # MathJax. However, it is strongly recommended to install a local copy of
1460 # MathJax from http://www.mathjax.org before deployment.
1461 # The default value is: http://cdn.mathjax.org/mathjax/latest.
1462 # This tag requires that the tag USE_MATHJAX is set to YES.
1464 MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1466 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
1467 # extension names that should be enabled during MathJax rendering. For example
1468 # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
1469 # This tag requires that the tag USE_MATHJAX is set to YES.
1471 MATHJAX_EXTENSIONS =
1473 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
1474 # of code that will be used on startup of the MathJax code. See the MathJax site
1475 # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
1476 # example see the documentation.
1477 # This tag requires that the tag USE_MATHJAX is set to YES.
1481 # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
1482 # the HTML output. The underlying search engine uses javascript and DHTML and
1483 # should work on any modern browser. Note that when using HTML help
1484 # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
1485 # there is already a search function so this one should typically be disabled.
1486 # For large projects the javascript based search engine can be slow, then
1487 # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
1488 # search using the keyboard; to jump to the search box use <access key> + S
1489 # (what the <access key> is depends on the OS and browser, but it is typically
1490 # <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
1491 # key> to jump into the search results window, the results can be navigated
1492 # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
1493 # the search. The filter options can be selected when the cursor is inside the
1494 # search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
1495 # to select a filter and <Enter> or <escape> to activate or cancel the filter
1497 # The default value is: YES.
1498 # This tag requires that the tag GENERATE_HTML is set to YES.
1502 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1503 # implemented using a web server instead of a web client using Javascript. There
1504 # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
1505 # setting. When disabled, doxygen will generate a PHP script for searching and
1506 # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
1507 # and searching needs to be provided by external tools. See the section
1508 # "External Indexing and Searching" for details.
1509 # The default value is: NO.
1510 # This tag requires that the tag SEARCHENGINE is set to YES.
1512 SERVER_BASED_SEARCH = NO
1514 # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
1515 # script for searching. Instead the search results are written to an XML file
1516 # which needs to be processed by an external indexer. Doxygen will invoke an
1517 # external search engine pointed to by the SEARCHENGINE_URL option to obtain the
1520 # Doxygen ships with an example indexer (doxyindexer) and search engine
1521 # (doxysearch.cgi) which are based on the open source search engine library
1522 # Xapian (see: http://xapian.org/).
1524 # See the section "External Indexing and Searching" for details.
1525 # The default value is: NO.
1526 # This tag requires that the tag SEARCHENGINE is set to YES.
1528 EXTERNAL_SEARCH = NO
1530 # The SEARCHENGINE_URL should point to a search engine hosted by a web server
1531 # which will return the search results when EXTERNAL_SEARCH is enabled.
1533 # Doxygen ships with an example indexer (doxyindexer) and search engine
1534 # (doxysearch.cgi) which are based on the open source search engine library
1535 # Xapian (see: http://xapian.org/). See the section "External Indexing and
1536 # Searching" for details.
1537 # This tag requires that the tag SEARCHENGINE is set to YES.
1541 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1542 # search data is written to a file for indexing by an external tool. With the
1543 # SEARCHDATA_FILE tag the name of this file can be specified.
1544 # The default file is: searchdata.xml.
1545 # This tag requires that the tag SEARCHENGINE is set to YES.
1547 SEARCHDATA_FILE = searchdata.xml
1549 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
1550 # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1551 # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1552 # projects and redirect the results back to the right project.
1553 # This tag requires that the tag SEARCHENGINE is set to YES.
1555 EXTERNAL_SEARCH_ID =
1557 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1558 # projects other than the one defined by this configuration file, but that are
1559 # all added to the same external search index. Each project needs to have a
1560 # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
1561 # to a relative location where the documentation can be found. The format is:
1562 # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
1563 # This tag requires that the tag SEARCHENGINE is set to YES.
1565 EXTRA_SEARCH_MAPPINGS =
1567 #---------------------------------------------------------------------------
1568 # Configuration options related to the LaTeX output
1569 #---------------------------------------------------------------------------
1571 # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
1572 # The default value is: YES.
1576 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
1577 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1579 # The default directory is: latex.
1580 # This tag requires that the tag GENERATE_LATEX is set to YES.
1582 LATEX_OUTPUT = latex
1584 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1587 # Note that when enabling USE_PDFLATEX this option is only used for generating
1588 # bitmaps for formulas in the HTML output, but not in the Makefile that is
1589 # written to the output directory.
1590 # The default file is: latex.
1591 # This tag requires that the tag GENERATE_LATEX is set to YES.
1593 LATEX_CMD_NAME = latex
1595 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
1597 # The default file is: makeindex.
1598 # This tag requires that the tag GENERATE_LATEX is set to YES.
1600 MAKEINDEX_CMD_NAME = makeindex
1602 # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
1603 # documents. This may be useful for small projects and may help to save some
1605 # The default value is: NO.
1606 # This tag requires that the tag GENERATE_LATEX is set to YES.
1610 # The PAPER_TYPE tag can be used to set the paper type that is used by the
1612 # Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
1613 # 14 inches) and executive (7.25 x 10.5 inches).
1614 # The default value is: a4.
1615 # This tag requires that the tag GENERATE_LATEX is set to YES.
1619 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
1620 # that should be included in the LaTeX output. The package can be specified just
1621 # by its name or with the correct syntax as to be used with the LaTeX
1622 # \usepackage command. To get the times font for instance you can specify :
1623 # EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
1624 # To use the option intlimits with the amsmath package you can specify:
1625 # EXTRA_PACKAGES=[intlimits]{amsmath}
1626 # If left blank no extra packages will be included.
1627 # This tag requires that the tag GENERATE_LATEX is set to YES.
1631 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
1632 # generated LaTeX document. The header should contain everything until the first
1633 # chapter. If it is left blank doxygen will generate a standard header. See
1634 # section "Doxygen usage" for information on how to let doxygen write the
1635 # default header to a separate file.
1637 # Note: Only use a user-defined header if you know what you are doing! The
1638 # following commands have a special meaning inside the header: $title,
1639 # $datetime, $date, $doxygenversion, $projectname, $projectnumber,
1640 # $projectbrief, $projectlogo. Doxygen will replace $title with the empty
1641 # string, for the replacement values of the other commands the user is referred
1643 # This tag requires that the tag GENERATE_LATEX is set to YES.
1647 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
1648 # generated LaTeX document. The footer should contain everything after the last
1649 # chapter. If it is left blank doxygen will generate a standard footer. See
1650 # LATEX_HEADER for more information on how to generate a default footer and what
1651 # special commands can be used inside the footer.
1653 # Note: Only use a user-defined footer if you know what you are doing!
1654 # This tag requires that the tag GENERATE_LATEX is set to YES.
1658 # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1659 # LaTeX style sheets that are included after the standard style sheets created
1660 # by doxygen. Using this option one can overrule certain style aspects. Doxygen
1661 # will copy the style sheet files to the output directory.
1662 # Note: The order of the extra style sheet files is of importance (e.g. the last
1663 # style sheet in the list overrules the setting of the previous ones in the
1665 # This tag requires that the tag GENERATE_LATEX is set to YES.
1667 LATEX_EXTRA_STYLESHEET =
1669 # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
1670 # other source files which should be copied to the LATEX_OUTPUT output
1671 # directory. Note that the files will be copied as-is; there are no commands or
1672 # markers available.
1673 # This tag requires that the tag GENERATE_LATEX is set to YES.
1677 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
1678 # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
1679 # contain links (just like the HTML output) instead of page references. This
1680 # makes the output suitable for online browsing using a PDF viewer.
1681 # The default value is: YES.
1682 # This tag requires that the tag GENERATE_LATEX is set to YES.
1684 PDF_HYPERLINKS = YES
1686 # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
1687 # the PDF file directly from the LaTeX files. Set this option to YES, to get a
1688 # higher quality PDF documentation.
1689 # The default value is: YES.
1690 # This tag requires that the tag GENERATE_LATEX is set to YES.
1694 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
1695 # command to the generated LaTeX files. This will instruct LaTeX to keep running
1696 # if errors occur, instead of asking the user for help. This option is also used
1697 # when generating formulas in HTML.
1698 # The default value is: NO.
1699 # This tag requires that the tag GENERATE_LATEX is set to YES.
1701 LATEX_BATCHMODE = NO
1703 # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
1704 # index chapters (such as File Index, Compound Index, etc.) in the output.
1705 # The default value is: NO.
1706 # This tag requires that the tag GENERATE_LATEX is set to YES.
1708 LATEX_HIDE_INDICES = NO
1710 # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
1711 # code with syntax highlighting in the LaTeX output.
1713 # Note that which sources are shown also depends on other settings such as
1715 # The default value is: NO.
1716 # This tag requires that the tag GENERATE_LATEX is set to YES.
1718 LATEX_SOURCE_CODE = NO
1720 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1721 # bibliography, e.g. plainnat, or ieeetr. See
1722 # http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
1723 # The default value is: plain.
1724 # This tag requires that the tag GENERATE_LATEX is set to YES.
1726 LATEX_BIB_STYLE = plain
1728 #---------------------------------------------------------------------------
1729 # Configuration options related to the RTF output
1730 #---------------------------------------------------------------------------
1732 # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
1733 # RTF output is optimized for Word 97 and may not look too pretty with other RTF
1735 # The default value is: NO.
1739 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
1740 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1742 # The default directory is: rtf.
1743 # This tag requires that the tag GENERATE_RTF is set to YES.
1747 # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
1748 # documents. This may be useful for small projects and may help to save some
1750 # The default value is: NO.
1751 # This tag requires that the tag GENERATE_RTF is set to YES.
1755 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
1756 # contain hyperlink fields. The RTF file will contain links (just like the HTML
1757 # output) instead of page references. This makes the output suitable for online
1758 # browsing using Word or some other Word compatible readers that support those
1761 # Note: WordPad (write) and others do not support links.
1762 # The default value is: NO.
1763 # This tag requires that the tag GENERATE_RTF is set to YES.
1767 # Load stylesheet definitions from file. Syntax is similar to doxygen's config
1768 # file, i.e. a series of assignments. You only have to provide replacements,
1769 # missing definitions are set to their default value.
1771 # See also section "Doxygen usage" for information on how to generate the
1772 # default style sheet that doxygen normally uses.
1773 # This tag requires that the tag GENERATE_RTF is set to YES.
1775 RTF_STYLESHEET_FILE =
1777 # Set optional variables used in the generation of an RTF document. Syntax is
1778 # similar to doxygen's config file. A template extensions file can be generated
1779 # using doxygen -e rtf extensionFile.
1780 # This tag requires that the tag GENERATE_RTF is set to YES.
1782 RTF_EXTENSIONS_FILE =
1784 # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
1785 # with syntax highlighting in the RTF output.
1787 # Note that which sources are shown also depends on other settings such as
1789 # The default value is: NO.
1790 # This tag requires that the tag GENERATE_RTF is set to YES.
1792 RTF_SOURCE_CODE = NO
1794 #---------------------------------------------------------------------------
1795 # Configuration options related to the man page output
1796 #---------------------------------------------------------------------------
1798 # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
1799 # classes and files.
1800 # The default value is: NO.
1804 # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
1805 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1806 # it. A directory man3 will be created inside the directory specified by
1808 # The default directory is: man.
1809 # This tag requires that the tag GENERATE_MAN is set to YES.
1813 # The MAN_EXTENSION tag determines the extension that is added to the generated
1814 # man pages. In case the manual section does not start with a number, the number
1815 # 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
1817 # The default value is: .3.
1818 # This tag requires that the tag GENERATE_MAN is set to YES.
1822 # The MAN_SUBDIR tag determines the name of the directory created within
1823 # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
1824 # MAN_EXTENSION with the initial . removed.
1825 # This tag requires that the tag GENERATE_MAN is set to YES.
1829 # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
1830 # will generate one additional man file for each entity documented in the real
1831 # man page(s). These additional files only source the real man page, but without
1832 # them the man command would be unable to find the correct page.
1833 # The default value is: NO.
1834 # This tag requires that the tag GENERATE_MAN is set to YES.
1838 #---------------------------------------------------------------------------
1839 # Configuration options related to the XML output
1840 #---------------------------------------------------------------------------
1842 # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
1843 # captures the structure of the code including all documentation.
1844 # The default value is: NO.
1848 # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
1849 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1851 # The default directory is: xml.
1852 # This tag requires that the tag GENERATE_XML is set to YES.
1856 # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
1857 # listings (including syntax highlighting and cross-referencing information) to
1858 # the XML output. Note that enabling this will significantly increase the size
1859 # of the XML output.
1860 # The default value is: YES.
1861 # This tag requires that the tag GENERATE_XML is set to YES.
1863 XML_PROGRAMLISTING = YES
1865 #---------------------------------------------------------------------------
1866 # Configuration options related to the DOCBOOK output
1867 #---------------------------------------------------------------------------
1869 # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
1870 # that can be used to generate PDF.
1871 # The default value is: NO.
1873 GENERATE_DOCBOOK = NO
1875 # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
1876 # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
1878 # The default directory is: docbook.
1879 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1881 DOCBOOK_OUTPUT = docbook
1883 # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
1884 # program listings (including syntax highlighting and cross-referencing
1885 # information) to the DOCBOOK output. Note that enabling this will significantly
1886 # increase the size of the DOCBOOK output.
1887 # The default value is: NO.
1888 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1890 DOCBOOK_PROGRAMLISTING = NO
1892 #---------------------------------------------------------------------------
1893 # Configuration options for the AutoGen Definitions output
1894 #---------------------------------------------------------------------------
1896 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
1897 # AutoGen Definitions (see http://autogen.sf.net) file that captures the
1898 # structure of the code including all documentation. Note that this feature is
1899 # still experimental and incomplete at the moment.
1900 # The default value is: NO.
1902 GENERATE_AUTOGEN_DEF = NO
1904 #---------------------------------------------------------------------------
1905 # Configuration options related to the Perl module output
1906 #---------------------------------------------------------------------------
1908 # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
1909 # file that captures the structure of the code including all documentation.
1911 # Note that this feature is still experimental and incomplete at the moment.
1912 # The default value is: NO.
1914 GENERATE_PERLMOD = NO
1916 # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
1917 # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
1918 # output from the Perl module output.
1919 # The default value is: NO.
1920 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
1924 # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
1925 # formatted so it can be parsed by a human reader. This is useful if you want to
1926 # understand what is going on. On the other hand, if this tag is set to NO, the
1927 # size of the Perl module output will be much smaller and Perl will parse it
1929 # The default value is: YES.
1930 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
1932 PERLMOD_PRETTY = YES
1934 # The names of the make variables in the generated doxyrules.make file are
1935 # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
1936 # so different doxyrules.make files included by the same Makefile don't
1937 # overwrite each other's variables.
1938 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
1940 PERLMOD_MAKEVAR_PREFIX =
1942 #---------------------------------------------------------------------------
1943 # Configuration options related to the preprocessor
1944 #---------------------------------------------------------------------------
1946 # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
1947 # C-preprocessor directives found in the sources and include files.
1948 # The default value is: YES.
1950 ENABLE_PREPROCESSING = YES
1952 # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
1953 # in the source code. If set to NO, only conditional compilation will be
1954 # performed. Macro expansion can be done in a controlled way by setting
1955 # EXPAND_ONLY_PREDEF to YES.
1956 # The default value is: NO.
1957 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1959 MACRO_EXPANSION = YES
1961 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
1962 # the macro expansion is limited to the macros specified with the PREDEFINED and
1963 # EXPAND_AS_DEFINED tags.
1964 # The default value is: NO.
1965 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1967 EXPAND_ONLY_PREDEF = YES
1969 # If the SEARCH_INCLUDES tag is set to YES, the include files in the
1970 # INCLUDE_PATH will be searched if a #include is found.
1971 # The default value is: YES.
1972 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1974 SEARCH_INCLUDES = YES
1976 # The INCLUDE_PATH tag can be used to specify one or more directories that
1977 # contain include files that are not input files but should be processed by the
1979 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
1983 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1984 # patterns (like *.h and *.hpp) to filter out the header-files in the
1985 # directories. If left blank, the patterns specified with FILE_PATTERNS will be
1987 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1989 INCLUDE_FILE_PATTERNS =
1991 # The PREDEFINED tag can be used to specify one or more macro names that are
1992 # defined before the preprocessor is started (similar to the -D option of e.g.
1993 # gcc). The argument of the tag is a list of macros of the form: name or
1994 # name=definition (no spaces). If the definition and the "=" are omitted, "=1"
1995 # is assumed. To prevent a macro definition from being undefined via #undef or
1996 # recursively expanded use the := operator instead of the = operator.
1997 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2001 "USING(name, T)=using name = T" \
2002 "CLASS(name, base)=class name : public base { public:" \
2003 "INIT(class)=class::class()" \
2004 "CONSTRUCTOR(class)=class::class(" \
2005 "DESTRUCTOR(class)=class::~class()" \
2006 "ATTRIB(class, name, T, val)=T name = val" \
2007 "ATTRIB_STRZONE(class, name, T, val)=T name = val" \
2008 "ATTRIBARRAY(class, name, T, val)=T name[val]" \
2009 "STATIC_ATTRIB(class, name, T, val)=static T name = val" \
2010 "STATIC_ATTRIB_STRZONE(class, name, T, val)=static T name = val" \
2011 "METHOD(class, name, prototype)=virtual void class::name()" \
2012 "ENDCLASS(class)=};" \
2015 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
2016 # tag can be used to specify a list of macro names that should be expanded. The
2017 # macro definition that is found in the sources will be used. Use the PREDEFINED
2018 # tag if you want to use a different macro definition that overrules the
2019 # definition found in the source code.
2020 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2022 EXPAND_AS_DEFINED = \
2025 INIT CONSTRUCTOR DESTRUCTOR \
2026 ATTRIB ATTRIB_STRZONE \
2027 STATIC_ATTRIB STATIC_ATTRIB_STRZONE \
2033 # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
2034 # remove all references to function-like macros that are alone on a line, have
2035 # an all uppercase name, and do not end with a semicolon. Such function macros
2036 # are typically used for boiler-plate code, and will confuse the parser if not
2038 # The default value is: YES.
2039 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2041 SKIP_FUNCTION_MACROS = YES
2043 #---------------------------------------------------------------------------
2044 # Configuration options related to external references
2045 #---------------------------------------------------------------------------
2047 # The TAGFILES tag can be used to specify one or more tag files. For each tag
2048 # file the location of the external documentation should be added. The format of
2049 # a tag file without this location is as follows:
2050 # TAGFILES = file1 file2 ...
2051 # Adding location for the tag files is done as follows:
2052 # TAGFILES = file1=loc1 "file2 = loc2" ...
2053 # where loc1 and loc2 can be relative or absolute paths or URLs. See the
2054 # section "Linking to external documentation" for more information about the use
2056 # Note: Each tag file must have a unique name (where the name does NOT include
2057 # the path). If a tag file is not located in the directory in which doxygen is
2058 # run, you must also specify the path to the tagfile here.
2062 # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
2063 # tag file that is based on the input files it reads. See section "Linking to
2064 # external documentation" for more information about the usage of tag files.
2068 # If the ALLEXTERNALS tag is set to YES, all external class will be listed in
2069 # the class index. If set to NO, only the inherited external classes will be
2071 # The default value is: NO.
2075 # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
2076 # in the modules index. If set to NO, only the current project's groups will be
2078 # The default value is: YES.
2080 EXTERNAL_GROUPS = YES
2082 # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
2083 # the related pages index. If set to NO, only the current project's pages will
2085 # The default value is: YES.
2087 EXTERNAL_PAGES = YES
2089 # The PERL_PATH should be the absolute path and name of the perl script
2090 # interpreter (i.e. the result of 'which perl').
2091 # The default file (with absolute path) is: /usr/bin/perl.
2093 PERL_PATH = /usr/bin/perl
2095 #---------------------------------------------------------------------------
2096 # Configuration options related to the dot tool
2097 #---------------------------------------------------------------------------
2099 # If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
2100 # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
2101 # NO turns the diagrams off. Note that this option also works with HAVE_DOT
2102 # disabled, but it is recommended to install and use dot, since it yields more
2104 # The default value is: YES.
2106 CLASS_DIAGRAMS = YES
2108 # You can define message sequence charts within doxygen comments using the \msc
2109 # command. Doxygen will then run the mscgen tool (see:
2110 # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
2111 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
2112 # the mscgen tool resides. If left empty the tool is assumed to be found in the
2113 # default search path.
2117 # You can include diagrams made with dia in doxygen documentation. Doxygen will
2118 # then run dia to produce the diagram and insert it in the documentation. The
2119 # DIA_PATH tag allows you to specify the directory where the dia binary resides.
2120 # If left empty dia is assumed to be found in the default search path.
2124 # If set to YES the inheritance and collaboration graphs will hide inheritance
2125 # and usage relations if the target is undocumented or is not a class.
2126 # The default value is: YES.
2128 HIDE_UNDOC_RELATIONS = NO
2130 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2131 # available from the path. This tool is part of Graphviz (see:
2132 # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
2133 # Bell Labs. The other options in this section have no effect if this option is
2135 # The default value is: NO.
2139 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
2140 # to run in parallel. When set to 0 doxygen will base this on the number of
2141 # processors available in the system. You can set it explicitly to a value
2142 # larger than 0 to get control over the balance between CPU load and processing
2144 # Minimum value: 0, maximum value: 32, default value: 0.
2145 # This tag requires that the tag HAVE_DOT is set to YES.
2149 # When you want a differently looking font in the dot files that doxygen
2150 # generates you can specify the font name using DOT_FONTNAME. You need to make
2151 # sure dot is able to find the font, which can be done by putting it in a
2152 # standard location or by setting the DOTFONTPATH environment variable or by
2153 # setting DOT_FONTPATH to the directory containing the font.
2154 # The default value is: Helvetica.
2155 # This tag requires that the tag HAVE_DOT is set to YES.
2157 DOT_FONTNAME = Helvetica
2159 # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
2161 # Minimum value: 4, maximum value: 24, default value: 10.
2162 # This tag requires that the tag HAVE_DOT is set to YES.
2166 # By default doxygen will tell dot to use the default font as specified with
2167 # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
2168 # the path where dot can find it using this tag.
2169 # This tag requires that the tag HAVE_DOT is set to YES.
2173 # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
2174 # each documented class showing the direct and indirect inheritance relations.
2175 # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
2176 # The default value is: YES.
2177 # This tag requires that the tag HAVE_DOT is set to YES.
2181 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2182 # graph for each documented class showing the direct and indirect implementation
2183 # dependencies (inheritance, containment, and class references variables) of the
2184 # class with other documented classes.
2185 # The default value is: YES.
2186 # This tag requires that the tag HAVE_DOT is set to YES.
2188 COLLABORATION_GRAPH = YES
2190 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2191 # groups, showing the direct groups dependencies.
2192 # The default value is: YES.
2193 # This tag requires that the tag HAVE_DOT is set to YES.
2197 # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
2198 # collaboration diagrams in a style similar to the OMG's Unified Modeling
2200 # The default value is: NO.
2201 # This tag requires that the tag HAVE_DOT is set to YES.
2205 # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
2206 # class node. If there are many fields or methods and many nodes the graph may
2207 # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
2208 # number of items for each type to make the size more manageable. Set this to 0
2209 # for no limit. Note that the threshold may be exceeded by 50% before the limit
2210 # is enforced. So when you set the threshold to 10, up to 15 fields may appear,
2211 # but if the number exceeds 15, the total amount of fields shown is limited to
2213 # Minimum value: 0, maximum value: 100, default value: 10.
2214 # This tag requires that the tag HAVE_DOT is set to YES.
2216 UML_LIMIT_NUM_FIELDS = 10
2218 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
2219 # collaboration graphs will show the relations between templates and their
2221 # The default value is: NO.
2222 # This tag requires that the tag HAVE_DOT is set to YES.
2224 TEMPLATE_RELATIONS = NO
2226 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
2227 # YES then doxygen will generate a graph for each documented file showing the
2228 # direct and indirect include dependencies of the file with other documented
2230 # The default value is: YES.
2231 # This tag requires that the tag HAVE_DOT is set to YES.
2235 # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
2236 # set to YES then doxygen will generate a graph for each documented file showing
2237 # the direct and indirect include dependencies of the file with other documented
2239 # The default value is: YES.
2240 # This tag requires that the tag HAVE_DOT is set to YES.
2242 INCLUDED_BY_GRAPH = YES
2244 # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2245 # dependency graph for every global function or class method.
2247 # Note that enabling this option will significantly increase the time of a run.
2248 # So in most cases it will be better to enable call graphs for selected
2249 # functions only using the \callgraph command. Disabling a call graph can be
2250 # accomplished by means of the command \hidecallgraph.
2251 # The default value is: NO.
2252 # This tag requires that the tag HAVE_DOT is set to YES.
2256 # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2257 # dependency graph for every global function or class method.
2259 # Note that enabling this option will significantly increase the time of a run.
2260 # So in most cases it will be better to enable caller graphs for selected
2261 # functions only using the \callergraph command. Disabling a caller graph can be
2262 # accomplished by means of the command \hidecallergraph.
2263 # The default value is: NO.
2264 # This tag requires that the tag HAVE_DOT is set to YES.
2268 # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2269 # hierarchy of all classes instead of a textual one.
2270 # The default value is: YES.
2271 # This tag requires that the tag HAVE_DOT is set to YES.
2273 GRAPHICAL_HIERARCHY = YES
2275 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2276 # dependencies a directory has on other directories in a graphical way. The
2277 # dependency relations are determined by the #include relations between the
2278 # files in the directories.
2279 # The default value is: YES.
2280 # This tag requires that the tag HAVE_DOT is set to YES.
2282 DIRECTORY_GRAPH = YES
2284 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
2285 # generated by dot. For an explanation of the image formats see the section
2286 # output formats in the documentation of the dot tool (Graphviz (see:
2287 # http://www.graphviz.org/)).
2288 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
2289 # to make the SVG files visible in IE 9+ (other browsers do not have this
2291 # Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
2292 # png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
2293 # png:gdiplus:gdiplus.
2294 # The default value is: png.
2295 # This tag requires that the tag HAVE_DOT is set to YES.
2297 DOT_IMAGE_FORMAT = svg
2299 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
2300 # enable generation of interactive SVG images that allow zooming and panning.
2302 # Note that this requires a modern browser other than Internet Explorer. Tested
2303 # and working are Firefox, Chrome, Safari, and Opera.
2304 # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
2305 # the SVG files visible. Older versions of IE do not have SVG support.
2306 # The default value is: NO.
2307 # This tag requires that the tag HAVE_DOT is set to YES.
2309 INTERACTIVE_SVG = YES
2311 # The DOT_PATH tag can be used to specify the path where the dot tool can be
2312 # found. If left blank, it is assumed the dot tool can be found in the path.
2313 # This tag requires that the tag HAVE_DOT is set to YES.
2317 # The DOTFILE_DIRS tag can be used to specify one or more directories that
2318 # contain dot files that are included in the documentation (see the \dotfile
2320 # This tag requires that the tag HAVE_DOT is set to YES.
2324 # The MSCFILE_DIRS tag can be used to specify one or more directories that
2325 # contain msc files that are included in the documentation (see the \mscfile
2330 # The DIAFILE_DIRS tag can be used to specify one or more directories that
2331 # contain dia files that are included in the documentation (see the \diafile
2336 # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
2337 # path where java can find the plantuml.jar file. If left blank, it is assumed
2338 # PlantUML is not used or called during a preprocessing step. Doxygen will
2339 # generate a warning when it encounters a \startuml command in this case and
2340 # will not generate output for the diagram.
2344 # When using plantuml, the specified paths are searched for files specified by
2345 # the !include statement in a plantuml block.
2347 PLANTUML_INCLUDE_PATH =
2349 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
2350 # that will be shown in the graph. If the number of nodes in a graph becomes
2351 # larger than this value, doxygen will truncate the graph, which is visualized
2352 # by representing a node as a red box. Note that doxygen if the number of direct
2353 # children of the root node in a graph is already larger than
2354 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
2355 # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
2356 # Minimum value: 0, maximum value: 10000, default value: 50.
2357 # This tag requires that the tag HAVE_DOT is set to YES.
2359 DOT_GRAPH_MAX_NODES = 500
2361 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
2362 # generated by dot. A depth value of 3 means that only nodes reachable from the
2363 # root by following a path via at most 3 edges will be shown. Nodes that lay
2364 # further from the root node will be omitted. Note that setting this option to 1
2365 # or 2 may greatly reduce the computation time needed for large code bases. Also
2366 # note that the size of a graph can be further restricted by
2367 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
2368 # Minimum value: 0, maximum value: 1000, default value: 0.
2369 # This tag requires that the tag HAVE_DOT is set to YES.
2371 MAX_DOT_GRAPH_DEPTH = 0
2373 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
2374 # background. This is disabled by default, because dot on Windows does not seem
2375 # to support this out of the box.
2377 # Warning: Depending on the platform used, enabling this option may lead to
2378 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
2380 # The default value is: NO.
2381 # This tag requires that the tag HAVE_DOT is set to YES.
2383 DOT_TRANSPARENT = YES
2385 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
2386 # files in one run (i.e. multiple -o and -T options on the command line). This
2387 # makes dot run faster, but since only newer versions of dot (>1.8.10) support
2388 # this, this feature is disabled by default.
2389 # The default value is: NO.
2390 # This tag requires that the tag HAVE_DOT is set to YES.
2392 DOT_MULTI_TARGETS = YES
2394 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2395 # explaining the meaning of the various boxes and arrows in the dot generated
2397 # The default value is: YES.
2398 # This tag requires that the tag HAVE_DOT is set to YES.
2400 GENERATE_LEGEND = YES
2402 # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
2403 # files that are used to generate the various graphs.
2404 # The default value is: YES.
2405 # This tag requires that the tag HAVE_DOT is set to YES.