7 # The type of line endings
8 # WARNING: Best is not unique (auto lf)
9 newlines = auto # auto/lf/crlf/cr
11 # The original size of tabs in the input
12 input_tab_size = 4 # number
14 # The size of tabs in the output (only used if align_with_tabs=true)
15 output_tab_size = 4 # number
17 # The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
18 string_escape_char = 92 # number #ignore
20 # Alternate string escape char for Pawn. Only works right before the quote char.
21 string_escape_char2 = 0 # number #ignore
23 # Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
24 # If true (default), 'assert(x<0 && y>=3)' will be broken.
25 # Improvements to template detection may make this option obsolete.
26 # WARNING: Code doesn't seem to use this feature - delete from the config?
27 tok_split_gte = false # false/true
29 # Control what to do with the UTF-8 BOM (recommend 'remove')
30 utf8_bom = remove # ignore/add/remove/force #force
32 # If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8
33 utf8_byte = true # false/true #force
35 # Force the output encoding to UTF-8
36 utf8_force = true # false/true #force
42 # The number of columns to indent per level.
43 # Usually 2, 3, 4, or 8.
44 indent_columns = 4 # number
46 # The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
47 # For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level
48 indent_continue = indent_columns # number
50 # How to use tabs when indenting code
52 # 1=indent with tabs to brace level, align with spaces
53 # 2=indent and align with tabs, using spaces when not on a tabstop
54 indent_with_tabs = 1 # number #force
56 # Comments that are not a brace level are indented with tabs on a tabstop.
57 # Requires indent_with_tabs=2. If false, will use spaces.
58 indent_cmt_with_tabs = false # false/true
60 # Whether to indent strings broken by '\' so that they line up
61 # WARNING: Code doesn't seem to use this feature - delete from the config?
62 indent_align_string = false # false/true
64 # The number of spaces to indent multi-line XML strings.
65 # Requires indent_align_string=True
66 # WARNING: Code doesn't seem to use this feature - delete from the config?
67 indent_xml_string = 0 # number
69 # Spaces to indent '{' from level
70 indent_brace = 0 # number
72 # Whether braces are indented to the body level
73 indent_braces = false # false/true
75 # Disabled indenting function braces if indent_braces is true
76 # WARNING: Code doesn't seem to use this feature - delete from the config?
77 indent_braces_no_func = false # false/true
79 # Disabled indenting class braces if indent_braces is true
80 # WARNING: Code doesn't seem to use this feature - delete from the config?
81 indent_braces_no_class = false # false/true
83 # Disabled indenting struct braces if indent_braces is true
84 # WARNING: Code doesn't seem to use this feature - delete from the config?
85 indent_braces_no_struct = false # false/true
87 # Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
88 indent_brace_parent = false # false/true
90 # Whether the 'namespace' body is indented
91 # WARNING: Code doesn't seem to use this feature - delete from the config?
92 indent_namespace = false # false/true
94 # The number of spaces to indent a namespace block
95 # WARNING: Code doesn't seem to use this feature - delete from the config?
96 indent_namespace_level = 0 # number
98 # If the body of the namespace is longer than this number, it won't be indented.
99 # Requires indent_namespace=true. Default=0 (no limit)
100 # WARNING: Code doesn't seem to use this feature - delete from the config?
101 indent_namespace_limit = 0 # number
103 # Whether the 'extern "C"' body is indented
104 # WARNING: Code doesn't seem to use this feature - delete from the config?
105 indent_extern = false # false/true
107 # Whether the 'class' body is indented
108 # WARNING: Code doesn't seem to use this feature - delete from the config?
109 indent_class = false # false/true
111 # Whether to indent the stuff after a leading class colon
112 # WARNING: Code doesn't seem to use this feature - delete from the config?
113 indent_class_colon = false # false/true
115 # Virtual indent from the ':' for member initializers. Default is 2
116 # WARNING: Code doesn't seem to use this feature - delete from the config?
117 indent_ctor_init_leading = 0 # number
119 # Additional indenting for constructor initializer list
120 # WARNING: Code doesn't seem to use this feature - delete from the config?
121 indent_ctor_init = 0 # number
123 # False=treat 'else\nif' as 'else if' for indenting purposes
124 # True=indent the 'if' one level
125 indent_else_if = true # false/true
127 # Amount to indent variable declarations after a open brace. neg=relative, pos=absolute
128 indent_var_def_blk = 0 # number
130 # Indent continued variable declarations instead of aligning.
131 # WARNING: Code doesn't seem to use this feature - delete from the config?
132 indent_var_def_cont = false # false/true
134 # True: force indentation of function definition to start in column 1
135 # False: use the default behavior
136 indent_func_def_force_col1 = false # false/true
138 # True: indent continued function call parameters one indent level
139 # False: align parameters under the open paren
140 indent_func_call_param = true # false/true
142 # Same as indent_func_call_param, but for function defs
143 indent_func_def_param = true # false/true
145 # Same as indent_func_call_param, but for function protos
146 indent_func_proto_param = true # false/true
148 # Same as indent_func_call_param, but for class declarations
149 # WARNING: Code doesn't seem to use this feature - delete from the config?
150 indent_func_class_param = false # false/true
152 # Same as indent_func_call_param, but for class variable constructors
153 # WARNING: Code doesn't seem to use this feature - delete from the config?
154 indent_func_ctor_var_param = false # false/true
156 # Same as indent_func_call_param, but for templates
157 # WARNING: Code doesn't seem to use this feature - delete from the config?
158 indent_template_param = false # false/true
160 # Double the indent for indent_func_xxx_param options
161 indent_func_param_double = false # false/true
163 # Indentation column for standalone 'const' function decl/proto qualifier
164 # WARNING: Code doesn't seem to use this feature - delete from the config?
165 indent_func_const = 0 # number
167 # Indentation column for standalone 'throw' function decl/proto qualifier
168 # WARNING: Code doesn't seem to use this feature - delete from the config?
169 indent_func_throw = 0 # number
171 # The number of spaces to indent a continued '->' or '.'
172 # Usually set to 0, 1, or indent_columns.
173 indent_member = 0 # number
175 # Spaces to indent single line ('//') comments on lines before code
176 indent_sing_line_comments = 0 # number
178 # If set, will indent trailing single line ('//') comments relative
179 # to the code instead of trying to keep the same absolute column
180 indent_relative_single_line_comments = true # false/true #force
182 # Spaces to indent 'case' from 'switch'
183 # Usually 0 or indent_columns.
184 indent_switch_case = indent_columns # number
186 # Spaces to shift the 'case' line, without affecting any other lines
188 indent_case_shift = 0 # number
190 # Spaces to indent '{' from 'case'.
191 # By default, the brace will appear under the 'c' in case.
192 # Usually set to 0 or indent_columns.
193 indent_case_brace = 0 # number
195 # Whether to indent comments found in first column
196 indent_col1_comment = false # false/true
198 # How to indent goto labels
199 # >0 : absolute column where 1 is the leftmost column
200 # <=0 : subtract from brace indent
201 # WARNING: Code doesn't seem to use this feature - delete from the config?
202 indent_label = 0 # number
204 # Same as indent_label, but for access specifiers that are followed by a colon
205 # WARNING: Code doesn't seem to use this feature - delete from the config?
206 indent_access_spec = 0 # number
208 # Indent the code after an access specifier by one level.
209 # If set, this option forces 'indent_access_spec=0'
210 # WARNING: Code doesn't seem to use this feature - delete from the config?
211 indent_access_spec_body = false # false/true
213 # If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)
214 # WARNING: Code doesn't seem to use this feature - delete from the config?
215 indent_paren_nl = false # false/true
217 # Controls the indent of a close paren after a newline.
218 # 0: Indent to body level
219 # 1: Align under the open paren
220 # 2: Indent to the brace level
221 indent_paren_close = 1 # number #force
223 # Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren
224 # WARNING: Code doesn't seem to use this feature - delete from the config?
225 indent_comma_paren = false # false/true
227 # Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren
228 # WARNING: Code doesn't seem to use this feature - delete from the config?
229 indent_bool_paren = false # false/true
231 # If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones
232 # WARNING: Code doesn't seem to use this feature - delete from the config?
233 indent_first_bool_expr = false # false/true
235 # If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)
236 # WARNING: Code doesn't seem to use this feature - delete from the config?
237 indent_square_nl = false # false/true
239 # Don't change the relative indent of ESQL/C 'EXEC SQL' bodies
240 # WARNING: Code doesn't seem to use this feature - delete from the config?
241 indent_preserve_sql = false # false/true
243 # Align continued statements at the '='. Default=True
244 # If FALSE or the '=' is followed by a newline, the next line is indent one tab.
245 # WARNING: Code doesn't seem to use this feature - delete from the config?
246 indent_align_assign = false # false/true
248 # Indent OC blocks at brace level instead of usual rules.
249 indent_oc_block = false # false/true #ignore
251 # Indent OC blocks in a message relative to the parameter name.
252 # 0=use indent_oc_block rules, 1+=spaces to indent #ignore
253 indent_oc_block_msg = 0 # number #ignore
255 # Minimum indent for subsequent parameters
256 indent_oc_msg_colon = 0 # number #ignore
262 # Add or remove space around arithmetic operator '+', '-', '/', '*', etc
263 sp_arith = ignore # ignore/add/remove/force #force
265 # Add or remove space around assignment operator '=', '+=', etc
266 # NOTE: is 44 worse than ignore
267 sp_assign = add # ignore/add/remove/force
269 # Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign
270 # WARNING: Code doesn't seem to use this feature - delete from the config?
271 sp_cpp_lambda_assign = ignore # ignore/add/remove/force
273 # Add or remove space after the capture specification in C++11 lambda.
274 # WARNING: Code doesn't seem to use this feature - delete from the config?
275 sp_cpp_lambda_paren = ignore # ignore/add/remove/force
277 # Add or remove space around assignment operator '=' in a prototype
278 # WARNING: Code doesn't seem to use this feature - delete from the config?
279 sp_assign_default = ignore # ignore/add/remove/force
281 # Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
282 sp_before_assign = ignore # ignore/add/remove/force #force
284 # Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
285 sp_after_assign = ignore # ignore/add/remove/force #force
287 # Add or remove space around assignment '=' in enum
288 # WARNING: Code doesn't seem to use this feature - delete from the config?
289 sp_enum_assign = ignore # ignore/add/remove/force
291 # Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
292 sp_enum_before_assign = ignore # ignore/add/remove/force #force
294 # Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
295 sp_enum_after_assign = ignore # ignore/add/remove/force #force
297 # Add or remove space around preprocessor '##' concatenation operator. Default=Add
298 # NOTE: is 4 worse than ignore
299 sp_pp_concat = remove # ignore/add/remove/force
301 # Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
302 sp_pp_stringify = remove # ignore/add/remove/force
304 # Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
305 sp_before_pp_stringify = add # ignore/add/remove/force
307 # Add or remove space around boolean operators '&&' and '||'
308 # NOTE: is 2 worse than ignore
309 sp_bool = add # ignore/add/remove/force
311 # Add or remove space around compare operator '<', '>', '==', etc
312 # NOTE: is 196 worse than ignore
313 sp_compare = add # ignore/add/remove/force
315 # Add or remove space inside '(' and ')'
316 # NOTE: is 10 worse than ignore
317 sp_inside_paren = remove # ignore/add/remove/force
319 # Add or remove space between nested parens
320 # NOTE: is 14 worse than ignore
321 sp_paren_paren = remove # ignore/add/remove/force
323 # Whether to balance spaces inside nested parens
324 sp_balance_nested_parens = false # false/true
326 # Add or remove space between ')' and '{'
327 # WARNING: Code doesn't seem to use this feature - delete from the config?
328 sp_paren_brace = ignore # ignore/add/remove/force
330 # Add or remove space before pointer star '*'
331 # WARNING: Code doesn't seem to use this feature - delete from the config?
332 sp_before_ptr_star = ignore # ignore/add/remove/force
334 # Add or remove space before pointer star '*' that isn't followed by a variable name
335 # If set to 'ignore', sp_before_ptr_star is used instead.
336 sp_before_unnamed_ptr_star = add # ignore/add/remove/force
338 # Add or remove space between pointer stars '*'
339 # WARNING: Code doesn't seem to use this feature - delete from the config?
340 sp_between_ptr_star = ignore # ignore/add/remove/force
342 # Add or remove space after pointer star '*', if followed by a word.
343 sp_after_ptr_star = add # ignore/add/remove/force
345 # Add or remove space after a pointer star '*', if followed by a func proto/def.
346 sp_after_ptr_star_func = add # ignore/add/remove/force
348 # Add or remove space after a pointer star '*', if followed by an open paren (function types).
349 # WARNING: Code doesn't seem to use this feature - delete from the config?
350 sp_ptr_star_paren = ignore # ignore/add/remove/force
352 # Add or remove space before a pointer star '*', if followed by a func proto/def.
353 sp_before_ptr_star_func = add # ignore/add/remove/force
355 # Add or remove space before a reference sign '&'
356 # WARNING: Code doesn't seem to use this feature - delete from the config?
357 sp_before_byref = ignore # ignore/add/remove/force
359 # Add or remove space before a reference sign '&' that isn't followed by a variable name
360 # If set to 'ignore', sp_before_byref is used instead.
361 # WARNING: Code doesn't seem to use this feature - delete from the config?
362 sp_before_unnamed_byref = ignore # ignore/add/remove/force
364 # Add or remove space after reference sign '&', if followed by a word.
365 # WARNING: Code doesn't seem to use this feature - delete from the config?
366 sp_after_byref = ignore # ignore/add/remove/force
368 # Add or remove space after a reference sign '&', if followed by a func proto/def.
369 # WARNING: Code doesn't seem to use this feature - delete from the config?
370 sp_after_byref_func = ignore # ignore/add/remove/force
372 # Add or remove space before a reference sign '&', if followed by a func proto/def.
373 # WARNING: Code doesn't seem to use this feature - delete from the config?
374 sp_before_byref_func = ignore # ignore/add/remove/force
376 # Add or remove space between type and word. Default=Force
377 sp_after_type = add # ignore/add/remove/force
379 # Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
380 # WARNING: Code doesn't seem to use this feature - delete from the config?
381 sp_before_template_paren = ignore # ignore/add/remove/force
383 # Add or remove space in 'template <' vs 'template<'.
384 # If set to ignore, sp_before_angle is used.
385 # WARNING: Code doesn't seem to use this feature - delete from the config?
386 sp_template_angle = ignore # ignore/add/remove/force
388 # Add or remove space before '<>'
389 # WARNING: Code doesn't seem to use this feature - delete from the config?
390 sp_before_angle = ignore # ignore/add/remove/force
392 # Add or remove space inside '<' and '>'
393 # WARNING: Code doesn't seem to use this feature - delete from the config?
394 sp_inside_angle = ignore # ignore/add/remove/force
396 # Add or remove space after '<>'
397 # WARNING: Code doesn't seem to use this feature - delete from the config?
398 sp_after_angle = ignore # ignore/add/remove/force
400 # Add or remove space between '<>' and '(' as found in 'new List<byte>();'
401 # WARNING: Code doesn't seem to use this feature - delete from the config?
402 sp_angle_paren = ignore # ignore/add/remove/force
404 # Add or remove space between '<>' and a word as in 'List<byte> m;'
405 # WARNING: Code doesn't seem to use this feature - delete from the config?
406 sp_angle_word = ignore # ignore/add/remove/force
408 # Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add
409 # WARNING: Code doesn't seem to use this feature - delete from the config?
410 sp_angle_shift = ignore # ignore/add/remove/force
412 # Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
413 # sp_angle_shift cannot remove the space without this option.
414 # WARNING: Code doesn't seem to use this feature - delete from the config?
415 sp_permit_cpp11_shift = false # false/true
417 # Add or remove space before '(' of 'if', 'for', 'switch', and 'while'
418 sp_before_sparen = remove # ignore/add/remove/force #force
420 # Add or remove space inside if-condition '(' and ')'
421 # NOTE: is 42 worse than ignore
422 sp_inside_sparen = remove # ignore/add/remove/force
424 # Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
425 sp_inside_sparen_close = ignore # ignore/add/remove/force #force
427 # Add or remove space before if-condition '('. Overrides sp_inside_sparen.
428 sp_inside_sparen_open = ignore # ignore/add/remove/force #force
430 # Add or remove space after ')' of 'if', 'for', 'switch', and 'while'
431 # WARNING: Code doesn't seem to use this feature - delete from the config?
432 sp_after_sparen = ignore # ignore/add/remove/force
434 # Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'
435 sp_sparen_brace = add # ignore/add/remove/force
437 # Add or remove space between 'invariant' and '(' in the D language.
438 sp_invariant_paren = ignore # ignore/add/remove/force #ignore
440 # Add or remove space after the ')' in 'invariant (C) c' in the D language.
441 sp_after_invariant_paren = ignore # ignore/add/remove/force #ignore
443 # Add or remove space before empty statement ';' on 'if', 'for' and 'while'
444 # WARNING: Code doesn't seem to use this feature - delete from the config?
445 sp_special_semi = ignore # ignore/add/remove/force
447 # Add or remove space before ';'. Default=Remove
448 # NOTE: is 2 worse than ignore
449 sp_before_semi = remove # ignore/add/remove/force
451 # Add or remove space before ';' in non-empty 'for' statements
452 sp_before_semi_for = remove # ignore/add/remove/force
454 # Add or remove space before a semicolon of an empty part of a for statement.
455 sp_before_semi_for_empty = add # ignore/add/remove/force
457 # Add or remove space after ';', except when followed by a comment. Default=Add
458 # NOTE: is 56 worse than ignore
459 sp_after_semi = add # ignore/add/remove/force
461 # Add or remove space after ';' in non-empty 'for' statements. Default=Force
462 sp_after_semi_for = add # ignore/add/remove/force
464 # Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
465 sp_after_semi_for_empty = add # ignore/add/remove/force
467 # Add or remove space before '[' (except '[]')
468 sp_before_square = remove # ignore/add/remove/force
470 # Add or remove space before '[]'
471 # WARNING: Code doesn't seem to use this feature - delete from the config?
472 sp_before_squares = ignore # ignore/add/remove/force
474 # Add or remove space inside a non-empty '[' and ']'
475 sp_inside_square = remove # ignore/add/remove/force
477 # Add or remove space after ','
478 # NOTE: is 742 worse than ignore
479 sp_after_comma = add # ignore/add/remove/force #force
481 # Add or remove space before ','
482 # NOTE: is 58 worse than ignore
483 sp_before_comma = remove # ignore/add/remove/force
485 # Add or remove space between an open paren and comma: '(,' vs '( ,'
486 # WARNING: Code doesn't seem to use this feature - delete from the config?
487 sp_paren_comma = ignore # ignore/add/remove/force
489 # Add or remove space before the variadic '...' when preceded by a non-punctuator
490 # WARNING: Code doesn't seem to use this feature - delete from the config?
491 sp_before_ellipsis = ignore # ignore/add/remove/force
493 # Add or remove space after class ':'
494 # WARNING: Code doesn't seem to use this feature - delete from the config?
495 sp_after_class_colon = ignore # ignore/add/remove/force
497 # Add or remove space before class ':'
498 # WARNING: Code doesn't seem to use this feature - delete from the config?
499 sp_before_class_colon = ignore # ignore/add/remove/force
501 # Add or remove space before case ':'. Default=Remove
502 sp_before_case_colon = remove # ignore/add/remove/force
504 # Add or remove space between 'operator' and operator sign
505 # WARNING: Code doesn't seem to use this feature - delete from the config?
506 sp_after_operator = ignore # ignore/add/remove/force
508 # Add or remove space between the operator symbol and the open paren, as in 'operator ++('
509 # WARNING: Code doesn't seem to use this feature - delete from the config?
510 sp_after_operator_sym = ignore # ignore/add/remove/force
512 # Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'
513 # WARNING: Code doesn't seem to use this feature - delete from the config?
514 sp_after_cast = ignore # ignore/add/remove/force
516 # Add or remove spaces inside cast parens
517 sp_inside_paren_cast = remove # ignore/add/remove/force
519 # Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'
520 sp_cpp_cast_paren = remove # ignore/add/remove/force
522 # Add or remove space between 'sizeof' and '('
523 # WARNING: Code doesn't seem to use this feature - delete from the config?
524 sp_sizeof_paren = ignore # ignore/add/remove/force
526 # Add or remove space after the tag keyword (Pawn)
527 sp_after_tag = ignore # ignore/add/remove/force #ignore
529 # Add or remove space inside enum '{' and '}'
530 # WARNING: Code doesn't seem to use this feature - delete from the config?
531 sp_inside_braces_enum = ignore # ignore/add/remove/force
533 # Add or remove space inside struct/union '{' and '}'
534 # WARNING: Code doesn't seem to use this feature - delete from the config?
535 sp_inside_braces_struct = ignore # ignore/add/remove/force
537 # Add or remove space inside '{' and '}'
538 sp_inside_braces = add # ignore/add/remove/force
540 # Add or remove space inside '{}'
541 # NOTE: is 10 worse than ignore
542 sp_inside_braces_empty = remove # ignore/add/remove/force
544 # Add or remove space between return type and function name
545 # A minimum of 1 is forced except for pointer return types.
546 sp_type_func = add # ignore/add/remove/force
548 # Add or remove space between function name and '(' on function declaration
549 # NOTE: is 30 worse than ignore
550 sp_func_proto_paren = remove # ignore/add/remove/force
552 # Add or remove space between function name and '(' on function definition
553 # NOTE: is 400 worse than ignore
554 sp_func_def_paren = remove # ignore/add/remove/force
556 # Add or remove space inside empty function '()'
557 sp_inside_fparens = remove # ignore/add/remove/force
559 # Add or remove space inside function '(' and ')'
560 # NOTE: is 78 worse than ignore
561 sp_inside_fparen = remove # ignore/add/remove/force
563 # Add or remove space inside the first parens in the function type: 'void (*x)(...)'
564 # WARNING: Code doesn't seem to use this feature - delete from the config?
565 sp_inside_tparen = ignore # ignore/add/remove/force
567 # Add or remove between the parens in the function type: 'void (*x)(...)'
568 # WARNING: Code doesn't seem to use this feature - delete from the config?
569 sp_after_tparen_close = ignore # ignore/add/remove/force
571 # Add or remove space between ']' and '(' when part of a function call.
572 # WARNING: Code doesn't seem to use this feature - delete from the config?
573 sp_square_fparen = ignore # ignore/add/remove/force
575 # Add or remove space between ')' and '{' of function
576 sp_fparen_brace = add # ignore/add/remove/force
578 # Add or remove space between function name and '(' on function calls
579 # NOTE: is 940 worse than ignore
580 sp_func_call_paren = remove # ignore/add/remove/force
582 # Add or remove space between function name and '()' on function calls without parameters.
583 # If set to 'ignore' (the default), sp_func_call_paren is used.
584 sp_func_call_paren_empty = remove # ignore/add/remove/force
586 # Add or remove space between the user function name and '(' on function calls
587 # You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
588 sp_func_call_user_paren = remove # ignore/add/remove/force
590 # Add or remove space between a constructor/destructor and the open paren
591 sp_func_class_paren = remove # ignore/add/remove/force
593 # Add or remove space between 'return' and '('
594 # WARNING: Code doesn't seem to use this feature - delete from the config?
595 sp_return_paren = ignore # ignore/add/remove/force
597 # Add or remove space between '__attribute__' and '('
598 # WARNING: Code doesn't seem to use this feature - delete from the config?
599 sp_attribute_paren = ignore # ignore/add/remove/force
601 # Add or remove space between 'defined' and '(' in '#if defined (FOO)'
602 # WARNING: Code doesn't seem to use this feature - delete from the config?
603 sp_defined_paren = ignore # ignore/add/remove/force
605 # Add or remove space between 'throw' and '(' in 'throw (something)'
606 # WARNING: Code doesn't seem to use this feature - delete from the config?
607 sp_throw_paren = ignore # ignore/add/remove/force
609 # Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'
610 # WARNING: Code doesn't seem to use this feature - delete from the config?
611 sp_after_throw = ignore # ignore/add/remove/force
613 # Add or remove space between 'catch' and '(' in 'catch (something) { }'
614 # If set to ignore, sp_before_sparen is used.
615 # WARNING: Code doesn't seem to use this feature - delete from the config?
616 sp_catch_paren = ignore # ignore/add/remove/force
618 # Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
619 # If set to ignore, sp_before_sparen is used.
620 sp_version_paren = ignore # ignore/add/remove/force #ignore
622 # Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
623 # If set to ignore, sp_before_sparen is used.
624 sp_scope_paren = ignore # ignore/add/remove/force #ignore
626 # Add or remove space between macro and value
627 sp_macro = remove # ignore/add/remove/force #force
629 # Add or remove space between macro function ')' and value
630 sp_macro_func = remove # ignore/add/remove/force #force
632 # Add or remove space between 'else' and '{' if on the same line
633 sp_else_brace = add # ignore/add/remove/force
635 # Add or remove space between '}' and 'else' if on the same line
636 # WARNING: Code doesn't seem to use this feature - delete from the config?
637 sp_brace_else = ignore # ignore/add/remove/force
639 # Add or remove space between '}' and the name of a typedef on the same line
640 sp_brace_typedef = add # ignore/add/remove/force
642 # Add or remove space between 'catch' and '{' if on the same line
643 # WARNING: Code doesn't seem to use this feature - delete from the config?
644 sp_catch_brace = ignore # ignore/add/remove/force
646 # Add or remove space between '}' and 'catch' if on the same line
647 # WARNING: Code doesn't seem to use this feature - delete from the config?
648 sp_brace_catch = ignore # ignore/add/remove/force
650 # Add or remove space between 'finally' and '{' if on the same line
651 # WARNING: Code doesn't seem to use this feature - delete from the config?
652 sp_finally_brace = ignore # ignore/add/remove/force
654 # Add or remove space between '}' and 'finally' if on the same line
655 # WARNING: Code doesn't seem to use this feature - delete from the config?
656 sp_brace_finally = ignore # ignore/add/remove/force
658 # Add or remove space between 'try' and '{' if on the same line
659 # WARNING: Code doesn't seem to use this feature - delete from the config?
660 sp_try_brace = ignore # ignore/add/remove/force
662 # Add or remove space between get/set and '{' if on the same line
663 # WARNING: Code doesn't seem to use this feature - delete from the config?
664 sp_getset_brace = ignore # ignore/add/remove/force
666 # Add or remove space before the '::' operator
667 # WARNING: Code doesn't seem to use this feature - delete from the config?
668 sp_before_dc = ignore # ignore/add/remove/force
670 # Add or remove space after the '::' operator
671 # WARNING: Code doesn't seem to use this feature - delete from the config?
672 sp_after_dc = ignore # ignore/add/remove/force
674 # Add or remove around the D named array initializer ':' operator
675 sp_d_array_colon = ignore # ignore/add/remove/force #ignore
677 # Add or remove space after the '!' (not) operator. Default=Remove
678 sp_not = remove # ignore/add/remove/force
680 # Add or remove space after the '~' (invert) operator. Default=Remove
681 sp_inv = remove # ignore/add/remove/force
683 # Add or remove space after the '&' (address-of) operator. Default=Remove
684 # This does not affect the spacing after a '&' that is part of a type.
685 # WARNING: Code doesn't seem to use this feature - delete from the config?
686 sp_addr = ignore # ignore/add/remove/force
688 # Add or remove space around the '.' or '->' operators. Default=Remove
689 # NOTE: is 28 worse than ignore
690 sp_member = remove # ignore/add/remove/force
692 # Add or remove space after the '*' (dereference) operator. Default=Remove
693 # This does not affect the spacing after a '*' that is part of a type.
694 # WARNING: Code doesn't seem to use this feature - delete from the config?
695 sp_deref = ignore # ignore/add/remove/force
697 # Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove
698 # NOTE: is 4 worse than ignore
699 sp_sign = remove # ignore/add/remove/force
701 # Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove
702 sp_incdec = remove # ignore/add/remove/force
704 # Add or remove space before a backslash-newline at the end of a line. Default=Add
705 sp_before_nl_cont = add # ignore/add/remove/force #force
707 # Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'
708 sp_after_oc_scope = ignore # ignore/add/remove/force #ignore
710 # Add or remove space after the colon in message specs
711 # '-(int) f:(int) x;' vs '-(int) f: (int) x;'
712 sp_after_oc_colon = ignore # ignore/add/remove/force #ignore
714 # Add or remove space before the colon in message specs
715 # '-(int) f: (int) x;' vs '-(int) f : (int) x;'
716 sp_before_oc_colon = ignore # ignore/add/remove/force #ignore
718 # Add or remove space after the colon in immutable dictionary expression
719 # 'NSDictionary *test = @{@"foo" :@"bar"};'
720 sp_after_oc_dict_colon = ignore # ignore/add/remove/force #ignore
722 # Add or remove space before the colon in immutable dictionary expression
723 # 'NSDictionary *test = @{@"foo" :@"bar"};'
724 sp_before_oc_dict_colon = ignore # ignore/add/remove/force #ignore
726 # Add or remove space after the colon in message specs
727 # '[object setValue:1];' vs '[object setValue: 1];'
728 sp_after_send_oc_colon = ignore # ignore/add/remove/force #ignore
730 # Add or remove space before the colon in message specs
731 # '[object setValue:1];' vs '[object setValue :1];'
732 sp_before_send_oc_colon = ignore # ignore/add/remove/force #ignore
734 # Add or remove space after the (type) in message specs
735 # '-(int)f: (int) x;' vs '-(int)f: (int)x;'
736 sp_after_oc_type = ignore # ignore/add/remove/force #ignore
738 # Add or remove space after the first (type) in message specs
739 # '-(int) f:(int)x;' vs '-(int)f:(int)x;'
740 sp_after_oc_return_type = ignore # ignore/add/remove/force #ignore
742 # Add or remove space between '@selector' and '('
743 # '@selector(msgName)' vs '@selector (msgName)'
744 # Also applies to @protocol() constructs
745 sp_after_oc_at_sel = ignore # ignore/add/remove/force #ignore
747 # Add or remove space between '@selector(x)' and the following word
748 # '@selector(foo) a:' vs '@selector(foo)a:'
749 sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force #ignore
751 # Add or remove space inside '@selector' parens
752 # '@selector(foo)' vs '@selector( foo )'
753 # Also applies to @protocol() constructs
754 sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force #ignore
756 # Add or remove space before a block pointer caret
757 # '^int (int arg){...}' vs. ' ^int (int arg){...}'
758 sp_before_oc_block_caret = ignore # ignore/add/remove/force #ignore
760 # Add or remove space after a block pointer caret
761 # '^int (int arg){...}' vs. '^ int (int arg){...}'
762 sp_after_oc_block_caret = ignore # ignore/add/remove/force #ignore
764 # Add or remove space between the receiver and selector in a message.
765 # '[receiver selector ...]'
766 sp_after_oc_msg_receiver = ignore # ignore/add/remove/force #ignore
768 # Add or remove space after @property.
769 sp_after_oc_property = ignore # ignore/add/remove/force #ignore
771 # Add or remove space around the ':' in 'b ? t : f'
772 sp_cond_colon = add # ignore/add/remove/force
774 # Add or remove space around the '?' in 'b ? t : f'
775 sp_cond_question = add # ignore/add/remove/force
777 # Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
778 # WARNING: Code doesn't seem to use this feature - delete from the config?
779 sp_case_label = ignore # ignore/add/remove/force
781 # Control the space around the D '..' operator.
782 # WARNING: Code doesn't seem to use this feature - delete from the config?
783 sp_range = ignore # ignore/add/remove/force
785 # Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java)
786 # WARNING: Code doesn't seem to use this feature - delete from the config?
787 sp_after_for_colon = ignore # ignore/add/remove/force
789 # Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java)
790 # WARNING: Code doesn't seem to use this feature - delete from the config?
791 sp_before_for_colon = ignore # ignore/add/remove/force
793 # Control the spacing in 'extern (C)' (D)
794 # WARNING: Code doesn't seem to use this feature - delete from the config?
795 sp_extern_paren = ignore # ignore/add/remove/force
797 # Control the space after the opening of a C++ comment '// A' vs '//A'
798 sp_cmt_cpp_start = add # ignore/add/remove/force #force
800 # Controls the spaces between #else or #endif and a trailing comment
801 # WARNING: Code doesn't seem to use this feature - delete from the config?
802 sp_endif_cmt = ignore # ignore/add/remove/force
804 # Controls the spaces after 'new', 'delete', and 'delete[]'
805 # WARNING: Code doesn't seem to use this feature - delete from the config?
806 sp_after_new = ignore # ignore/add/remove/force
808 # Controls the spaces before a trailing or embedded comment
809 sp_before_tr_emb_cmt = force # ignore/add/remove/force #force
811 # Number of spaces before a trailing or embedded comment
812 sp_num_before_tr_emb_cmt = 2 # number #force
814 # Control space between a Java annotation and the open paren.
815 # WARNING: Code doesn't seem to use this feature - delete from the config?
816 sp_annotation_paren = ignore # ignore/add/remove/force
819 # Code alignment (not left column spaces/tabs)
822 # Whether to keep non-indenting tabs
823 align_keep_tabs = false # false/true #force
825 # Whether to use tabs for aligning
826 # WARNING: Code doesn't seem to use this feature - delete from the config?
827 align_with_tabs = false # false/true
829 # Whether to bump out to the next tab when aligning
830 align_on_tabstop = false # false/true
832 # Whether to left-align numbers
833 # WARNING: Code doesn't seem to use this feature - delete from the config?
834 align_number_left = false # false/true
836 # Align variable definitions in prototypes and functions
837 # WARNING: Code doesn't seem to use this feature - delete from the config?
838 align_func_params = false # false/true
840 # Align parameters in single-line functions that have the same name.
841 # The function names must already be aligned with each other.
842 align_same_func_call_params = false # false/true
844 # The span for aligning variable definitions (0=don't align)
845 align_var_def_span = 0 # number
847 # How to align the star in variable definitions.
848 # 0=Part of the type 'void * foo;'
849 # 1=Part of the variable 'void *foo;'
850 # 2=Dangling 'void *foo;'
851 # WARNING: Code doesn't seem to use this feature - delete from the config?
852 align_var_def_star_style = 0 # number
854 # How to align the '&' in variable definitions.
856 # 1=Part of the variable
858 # WARNING: Code doesn't seem to use this feature - delete from the config?
859 align_var_def_amp_style = 0 # number
861 # The threshold for aligning variable definitions (0=no limit)
862 # WARNING: Code doesn't seem to use this feature - delete from the config?
863 align_var_def_thresh = 0 # number
865 # The gap for aligning variable definitions
866 # WARNING: Code doesn't seem to use this feature - delete from the config?
867 align_var_def_gap = 0 # number
869 # Whether to align the colon in struct bit fields
870 # WARNING: Code doesn't seem to use this feature - delete from the config?
871 align_var_def_colon = false # false/true
873 # Whether to align any attribute after the variable name
874 # WARNING: Code doesn't seem to use this feature - delete from the config?
875 align_var_def_attribute = false # false/true
877 # Whether to align inline struct/enum/union variable definitions
878 # WARNING: Code doesn't seem to use this feature - delete from the config?
879 align_var_def_inline = false # false/true
881 # The span for aligning on '=' in assignments (0=don't align)
882 align_assign_span = 0 # number
884 # The threshold for aligning on '=' in assignments (0=no limit)
885 # WARNING: Code doesn't seem to use this feature - delete from the config?
886 align_assign_thresh = 0 # number
888 # The span for aligning on '=' in enums (0=don't align)
889 # WARNING: Code doesn't seem to use this feature - delete from the config?
890 align_enum_equ_span = 0 # number
892 # The threshold for aligning on '=' in enums (0=no limit)
893 # WARNING: Code doesn't seem to use this feature - delete from the config?
894 align_enum_equ_thresh = 0 # number
896 # The span for aligning struct/union (0=don't align)
897 align_var_struct_span = 0 # number
899 # The threshold for aligning struct/union member definitions (0=no limit)
900 # WARNING: Code doesn't seem to use this feature - delete from the config?
901 align_var_struct_thresh = 0 # number
903 # The gap for aligning struct/union member definitions
904 # WARNING: Code doesn't seem to use this feature - delete from the config?
905 align_var_struct_gap = 0 # number
907 # The span for aligning struct initializer values (0=don't align)
908 align_struct_init_span = 0 # number
910 # The minimum space between the type and the synonym of a typedef
911 # WARNING: Code doesn't seem to use this feature - delete from the config?
912 align_typedef_gap = 0 # number
914 # The span for aligning single-line typedefs (0=don't align)
915 # WARNING: Code doesn't seem to use this feature - delete from the config?
916 align_typedef_span = 0 # number
918 # How to align typedef'd functions with other typedefs
919 # 0: Don't mix them at all
920 # 1: align the open paren with the types
921 # 2: align the function type name with the other type names
922 # WARNING: Code doesn't seem to use this feature - delete from the config?
923 align_typedef_func = 0 # number
925 # Controls the positioning of the '*' in typedefs. Just try it.
926 # 0: Align on typedef type, ignore '*'
927 # 1: The '*' is part of type name: typedef int *pint;
928 # 2: The '*' is part of the type, but dangling: typedef int *pint;
929 # WARNING: Code doesn't seem to use this feature - delete from the config?
930 align_typedef_star_style = 0 # number
932 # Controls the positioning of the '&' in typedefs. Just try it.
933 # 0: Align on typedef type, ignore '&'
934 # 1: The '&' is part of type name: typedef int &pint;
935 # 2: The '&' is part of the type, but dangling: typedef int &pint;
936 # WARNING: Code doesn't seem to use this feature - delete from the config?
937 align_typedef_amp_style = 0 # number
939 # The span for aligning comments that end lines (0=don't align)
940 align_right_cmt_span = 2 # number
942 # If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment
943 align_right_cmt_mix = false # false/true
945 # If a trailing comment is more than this number of columns away from the text it follows,
946 # it will qualify for being aligned. This has to be > 0 to do anything.
947 # WARNING: Best is not unique (0 1)
948 align_right_cmt_gap = 0 # number
950 # Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
951 # WARNING: Best is not unique (1 2)
952 align_right_cmt_at_col = 0 # number
954 # The span for aligning function prototypes (0=don't align)
955 align_func_proto_span = 0 # number
957 # Minimum gap between the return type and the function name.
958 # WARNING: Code doesn't seem to use this feature - delete from the config?
959 align_func_proto_gap = 0 # number
961 # Align function protos on the 'operator' keyword instead of what follows
962 # WARNING: Code doesn't seem to use this feature - delete from the config?
963 align_on_operator = false # false/true
965 # Whether to mix aligning prototype and variable declarations.
966 # If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.
967 # WARNING: Code doesn't seem to use this feature - delete from the config?
968 align_mix_var_proto = false # false/true
970 # Align single-line functions with function prototypes, uses align_func_proto_span
971 # WARNING: Code doesn't seem to use this feature - delete from the config?
972 align_single_line_func = false # false/true
974 # Aligning the open brace of single-line functions.
975 # Requires align_single_line_func=true, uses align_func_proto_span
976 # WARNING: Code doesn't seem to use this feature - delete from the config?
977 align_single_line_brace = false # false/true
979 # Gap for align_single_line_brace.
980 # WARNING: Code doesn't seem to use this feature - delete from the config?
981 align_single_line_brace_gap = 0 # number
983 # The span for aligning ObjC msg spec (0=don't align)
984 align_oc_msg_spec_span = 0 # number #ignore
986 # Whether to align macros wrapped with a backslash and a newline.
987 # This will not work right if the macro contains a multi-line comment.
988 align_nl_cont = false # false/true
990 # # Align macro functions and variables together
991 # WARNING: Code doesn't seem to use this feature - delete from the config?
992 align_pp_define_together = false # false/true
994 # The minimum space between label and value of a preprocessor define
995 # WARNING: Code doesn't seem to use this feature - delete from the config?
996 align_pp_define_gap = 0 # number
998 # The span for aligning on '#define' bodies (0=don't align)
999 align_pp_define_span = 0 # number
1001 # Align lines that start with '<<' with previous '<<'. Default=true
1002 # WARNING: Code doesn't seem to use this feature - delete from the config?
1003 align_left_shift = false # false/true
1005 # Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
1006 align_oc_msg_colon_span = 0 # number #ignore
1008 # If true, always align with the first parameter, even if it is too short.
1009 align_oc_msg_colon_first = false # false/true #ignore
1011 # Aligning parameters in an Obj-C '+' or '-' declaration on the ':'
1012 align_oc_decl_colon = false # false/true #ignore
1015 # Newline adding and removing options
1018 # Whether to collapse empty blocks between '{' and '}'
1019 nl_collapse_empty_body = false # false/true
1021 # Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'
1022 # WARNING: Code doesn't seem to use this feature - delete from the config?
1023 nl_assign_leave_one_liners = false # false/true
1025 # Don't split one-line braced statements inside a class xx { } body
1026 # WARNING: Code doesn't seem to use this feature - delete from the config?
1027 nl_class_leave_one_liners = false # false/true
1029 # Don't split one-line enums: 'enum foo { BAR = 15 };'
1030 # WARNING: Code doesn't seem to use this feature - delete from the config?
1031 nl_enum_leave_one_liners = false # false/true
1033 # Don't split one-line get or set functions
1034 # WARNING: Code doesn't seem to use this feature - delete from the config?
1035 nl_getset_leave_one_liners = false # false/true
1037 # Don't split one-line function definitions - 'int foo() { return 0; }'
1038 nl_func_leave_one_liners = true # false/true
1040 # Don't split one-line if/else statements - 'if(a) b++;'
1041 nl_if_leave_one_liners = true # false/true
1043 # Don't split one-line OC messages
1044 nl_oc_msg_leave_one_liner = false # false/true #ignore
1046 # Add or remove newlines at the start of the file
1047 nl_start_of_file = remove # ignore/add/remove/force #force
1049 # The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'
1050 nl_start_of_file_min = 0 # number #force
1052 # Add or remove newline at the end of the file
1053 nl_end_of_file = add # ignore/add/remove/force #force
1055 # The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')
1056 nl_end_of_file_min = 1 # number #force
1058 # Add or remove newline between '=' and '{'
1059 # WARNING: Code doesn't seem to use this feature - delete from the config?
1060 nl_assign_brace = ignore # ignore/add/remove/force
1062 # Add or remove newline between '=' and '[' (D only)
1063 # WARNING: Code doesn't seem to use this feature - delete from the config?
1064 nl_assign_square = ignore # ignore/add/remove/force
1066 # Add or remove newline after '= [' (D only). Will also affect the newline before the ']'
1067 # WARNING: Code doesn't seem to use this feature - delete from the config?
1068 nl_after_square_assign = ignore # ignore/add/remove/force
1070 # The number of blank lines after a block of variable definitions at the top of a function body
1071 # 0 = No change (default)
1072 nl_func_var_def_blk = 0 # number #force
1074 # The number of newlines before a block of typedefs
1075 # 0 = No change (default)
1076 nl_typedef_blk_start = 0 # number #force
1078 # The number of newlines after a block of typedefs
1079 # 0 = No change (default)
1080 nl_typedef_blk_end = 0 # number #force
1082 # The maximum consecutive newlines within a block of typedefs
1083 # 0 = No change (default)
1084 # WARNING: Best is not unique (0 2)
1085 nl_typedef_blk_in = 0 # number
1087 # The number of newlines before a block of variable definitions not at the top of a function body
1088 # 0 = No change (default)
1089 # WARNING: Best is not unique (0 1)
1090 nl_var_def_blk_start = 0 # number
1092 # The number of newlines after a block of variable definitions not at the top of a function body
1093 # 0 = No change (default)
1094 # WARNING: Best is not unique (0 1)
1095 nl_var_def_blk_end = 0 # number
1097 # The maximum consecutive newlines within a block of variable definitions
1098 # 0 = No change (default)
1099 # WARNING: Best is not unique (0 3)
1100 nl_var_def_blk_in = 0 # number
1102 # Add or remove newline between a function call's ')' and '{', as in:
1103 # list_for_each(item, &list) { }
1104 # NOTE: is 28 worse than ignore
1105 nl_fcall_brace = add # ignore/add/remove/force
1107 # Add or remove newline between 'enum' and '{'
1108 # WARNING: Code doesn't seem to use this feature - delete from the config?
1109 nl_enum_brace = ignore # ignore/add/remove/force
1111 # Add or remove newline between 'struct and '{'
1112 nl_struct_brace = add # ignore/add/remove/force
1114 # Add or remove newline between 'union' and '{'
1115 # WARNING: Code doesn't seem to use this feature - delete from the config?
1116 nl_union_brace = ignore # ignore/add/remove/force
1118 # Add or remove newline between 'if' and '{'
1119 # NOTE: is 245 worse than ignore
1120 nl_if_brace = add # ignore/add/remove/force
1122 # Add or remove newline between '}' and 'else'
1123 nl_brace_else = add # ignore/add/remove/force
1125 # Add or remove newline between 'else if' and '{'
1126 # If set to ignore, nl_if_brace is used instead
1127 nl_elseif_brace = add # ignore/add/remove/force
1129 # Add or remove newline between 'else' and '{'
1130 nl_else_brace = add # ignore/add/remove/force
1132 # Add or remove newline between 'else' and 'if'
1133 nl_else_if = remove # ignore/add/remove/force
1135 # Add or remove newline between '}' and 'finally'
1136 # WARNING: Code doesn't seem to use this feature - delete from the config?
1137 nl_brace_finally = ignore # ignore/add/remove/force
1139 # Add or remove newline between 'finally' and '{'
1140 # WARNING: Code doesn't seem to use this feature - delete from the config?
1141 nl_finally_brace = ignore # ignore/add/remove/force
1143 # Add or remove newline between 'try' and '{'
1144 # WARNING: Code doesn't seem to use this feature - delete from the config?
1145 nl_try_brace = ignore # ignore/add/remove/force
1147 # Add or remove newline between get/set and '{'
1148 # WARNING: Code doesn't seem to use this feature - delete from the config?
1149 nl_getset_brace = ignore # ignore/add/remove/force
1151 # Add or remove newline between 'for' and '{'
1152 # NOTE: is 93 worse than ignore
1153 nl_for_brace = add # ignore/add/remove/force
1155 # Add or remove newline between 'catch' and '{'
1156 # WARNING: Code doesn't seem to use this feature - delete from the config?
1157 nl_catch_brace = ignore # ignore/add/remove/force
1159 # Add or remove newline between '}' and 'catch'
1160 # WARNING: Code doesn't seem to use this feature - delete from the config?
1161 nl_brace_catch = ignore # ignore/add/remove/force
1163 # Add or remove newline between 'while' and '{'
1164 # NOTE: is 21 worse than ignore
1165 nl_while_brace = add # ignore/add/remove/force
1167 # Add or remove newline between 'scope (x)' and '{' (D)
1168 # WARNING: Code doesn't seem to use this feature - delete from the config?
1169 nl_scope_brace = ignore # ignore/add/remove/force
1171 # Add or remove newline between 'unittest' and '{' (D)
1172 # WARNING: Code doesn't seem to use this feature - delete from the config?
1173 nl_unittest_brace = ignore # ignore/add/remove/force
1175 # Add or remove newline between 'version (x)' and '{' (D)
1176 # WARNING: Code doesn't seem to use this feature - delete from the config?
1177 nl_version_brace = ignore # ignore/add/remove/force
1179 # Add or remove newline between 'using' and '{'
1180 # WARNING: Code doesn't seem to use this feature - delete from the config?
1181 nl_using_brace = ignore # ignore/add/remove/force
1183 # Add or remove newline between two open or close braces.
1184 # Due to general newline/brace handling, REMOVE may not work.
1185 nl_brace_brace = remove # ignore/add/remove/force
1187 # Add or remove newline between 'do' and '{'
1188 # NOTE: is 3 worse than ignore
1189 nl_do_brace = add # ignore/add/remove/force
1191 # Add or remove newline between '}' and 'while' of 'do' statement
1192 nl_brace_while = add # ignore/add/remove/force #force
1194 # Add or remove newline between 'switch' and '{'
1195 # NOTE: is 21 worse than ignore
1196 nl_switch_brace = add # ignore/add/remove/force
1198 # Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
1199 # Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.
1200 # WARNING: Code doesn't seem to use this feature - delete from the config?
1201 nl_multi_line_cond = false # false/true
1203 # Force a newline in a define after the macro name for multi-line defines.
1204 nl_multi_line_define = false # false/true
1206 # Whether to put a newline before 'case' statement
1207 nl_before_case = false # false/true
1209 # Add or remove newline between ')' and 'throw'
1210 # WARNING: Code doesn't seem to use this feature - delete from the config?
1211 nl_before_throw = ignore # ignore/add/remove/force
1213 # Whether to put a newline after 'case' statement
1214 nl_after_case = false # false/true
1216 # Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
1217 # NOTE: is 27 worse than ignore
1218 nl_case_colon_brace = add # ignore/add/remove/force
1220 # Newline between namespace and {
1221 # WARNING: Code doesn't seem to use this feature - delete from the config?
1222 nl_namespace_brace = ignore # ignore/add/remove/force
1224 # Add or remove newline between 'template<>' and whatever follows.
1225 # WARNING: Code doesn't seem to use this feature - delete from the config?
1226 nl_template_class = ignore # ignore/add/remove/force
1228 # Add or remove newline between 'class' and '{'
1229 # WARNING: Code doesn't seem to use this feature - delete from the config?
1230 nl_class_brace = ignore # ignore/add/remove/force
1232 # Add or remove newline after each ',' in the constructor member initialization
1233 # WARNING: Code doesn't seem to use this feature - delete from the config?
1234 nl_class_init_args = ignore # ignore/add/remove/force
1236 # Add or remove newline between return type and function name in a function definition
1237 nl_func_type_name = remove # ignore/add/remove/force
1239 # Add or remove newline between return type and function name inside a class {}
1240 # Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
1241 # WARNING: Code doesn't seem to use this feature - delete from the config?
1242 nl_func_type_name_class = ignore # ignore/add/remove/force
1244 # Add or remove newline between function scope and name in a definition
1245 # Controls the newline after '::' in 'void A::f() { }'
1246 # WARNING: Code doesn't seem to use this feature - delete from the config?
1247 nl_func_scope_name = ignore # ignore/add/remove/force
1249 # Add or remove newline between return type and function name in a prototype
1250 # NOTE: is 6 worse than ignore
1251 nl_func_proto_type_name = remove # ignore/add/remove/force
1253 # Add or remove newline between a function name and the opening '('
1254 nl_func_paren = remove # ignore/add/remove/force
1256 # Add or remove newline between a function name and the opening '(' in the definition
1257 nl_func_def_paren = remove # ignore/add/remove/force
1259 # Add or remove newline after '(' in a function declaration
1260 # NOTE: is 6 worse than ignore
1261 nl_func_decl_start = remove # ignore/add/remove/force
1263 # Add or remove newline after '(' in a function definition
1264 # NOTE: is 23 worse than ignore
1265 nl_func_def_start = remove # ignore/add/remove/force
1267 # Overrides nl_func_decl_start when there is only one parameter.
1268 nl_func_decl_start_single = ignore # ignore/add/remove/force #force
1270 # Overrides nl_func_def_start when there is only one parameter.
1271 nl_func_def_start_single = ignore # ignore/add/remove/force #force
1273 # Add or remove newline after each ',' in a function declaration
1274 # NOTE: is 38 worse than ignore
1275 nl_func_decl_args = remove # ignore/add/remove/force
1277 # Add or remove newline after each ',' in a function definition
1278 # NOTE: is 37 worse than ignore
1279 nl_func_def_args = remove # ignore/add/remove/force
1281 # Add or remove newline before the ')' in a function declaration
1282 nl_func_decl_end = remove # ignore/add/remove/force
1284 # Add or remove newline before the ')' in a function definition
1285 nl_func_def_end = remove # ignore/add/remove/force
1287 # Overrides nl_func_decl_end when there is only one parameter.
1288 nl_func_decl_end_single = ignore # ignore/add/remove/force #force
1290 # Overrides nl_func_def_end when there is only one parameter.
1291 nl_func_def_end_single = ignore # ignore/add/remove/force #force
1293 # Add or remove newline between '()' in a function declaration.
1294 nl_func_decl_empty = remove # ignore/add/remove/force
1296 # Add or remove newline between '()' in a function definition.
1297 nl_func_def_empty = remove # ignore/add/remove/force
1299 # Whether to put each OC message parameter on a separate line
1300 # See nl_oc_msg_leave_one_liner #ignore
1301 nl_oc_msg_args = false # false/true #ignore
1303 # Add or remove newline between function signature and '{'
1304 # NOTE: is 156 worse than ignore
1305 nl_fdef_brace = add # ignore/add/remove/force
1307 # Add or remove a newline between the return keyword and return expression.
1308 # NOTE: is 15 worse than ignore
1309 nl_return_expr = remove # ignore/add/remove/force
1311 # Whether to put a newline after semicolons, except in 'for' statements
1312 nl_after_semicolon = false # false/true
1314 # Whether to put a newline after brace open.
1315 # This also adds a newline before the matching brace close.
1316 nl_after_brace_open = false # false/true
1318 # If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
1319 # placed between the open brace and a trailing single-line comment.
1320 # WARNING: Code doesn't seem to use this feature - delete from the config?
1321 nl_after_brace_open_cmt = false # false/true
1323 # Whether to put a newline after a virtual brace open with a non-empty body.
1324 # These occur in un-braced if/while/do/for statement bodies.
1325 nl_after_vbrace_open = false # false/true
1327 # Whether to put a newline after a virtual brace open with an empty body.
1328 # These occur in un-braced if/while/do/for statement bodies.
1329 # WARNING: Code doesn't seem to use this feature - delete from the config?
1330 nl_after_vbrace_open_empty = false # false/true
1332 # Whether to put a newline after a brace close.
1333 # Does not apply if followed by a necessary ';'.
1334 nl_after_brace_close = false # false/true
1336 # Whether to put a newline after a virtual brace close.
1337 # Would add a newline before return in: 'if (foo) a++; return;'
1338 nl_after_vbrace_close = false # false/true
1340 # Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
1341 # Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close
1342 nl_brace_struct_var = remove # ignore/add/remove/force
1344 # Whether to alter newlines in '#define' macros
1345 nl_define_macro = false # false/true
1347 # Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'
1348 nl_squeeze_ifdef = false # false/true
1350 # Add or remove blank line before 'if'
1351 nl_before_if = ignore # ignore/add/remove/force #force
1353 # Add or remove blank line after 'if' statement
1354 nl_after_if = ignore # ignore/add/remove/force #force
1356 # Add or remove blank line before 'for'
1357 nl_before_for = ignore # ignore/add/remove/force #force
1359 # Add or remove blank line after 'for' statement
1360 nl_after_for = ignore # ignore/add/remove/force #force
1362 # Add or remove blank line before 'while'
1363 nl_before_while = ignore # ignore/add/remove/force #force
1365 # Add or remove blank line after 'while' statement
1366 nl_after_while = ignore # ignore/add/remove/force #force
1368 # Add or remove blank line before 'switch'
1369 nl_before_switch = ignore # ignore/add/remove/force #force
1371 # Add or remove blank line after 'switch' statement
1372 nl_after_switch = ignore # ignore/add/remove/force #force
1374 # Add or remove blank line before 'do'
1375 nl_before_do = ignore # ignore/add/remove/force #force
1377 # Add or remove blank line after 'do/while' statement
1378 nl_after_do = ignore # ignore/add/remove/force #force
1380 # Whether to double-space commented-entries in struct/enum
1381 # WARNING: Code doesn't seem to use this feature - delete from the config?
1382 nl_ds_struct_enum_cmt = false # false/true
1384 # Whether to double-space before the close brace of a struct/union/enum
1385 # (lower priority than 'eat_blanks_before_close_brace')
1386 # WARNING: Code doesn't seem to use this feature - delete from the config?
1387 nl_ds_struct_enum_close_brace = false # false/true
1389 # Add or remove a newline around a class colon.
1390 # Related to pos_class_colon, nl_class_init_args, and pos_comma.
1391 # WARNING: Code doesn't seem to use this feature - delete from the config?
1392 nl_class_colon = ignore # ignore/add/remove/force
1394 # Change simple unbraced if statements into a one-liner
1395 # 'if(b)\n i++;' => 'if(b) i++;'
1396 nl_create_if_one_liner = false # false/true
1398 # Change simple unbraced for statements into a one-liner
1399 # 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
1400 nl_create_for_one_liner = false # false/true
1402 # Change simple unbraced while statements into a one-liner
1403 # 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
1404 nl_create_while_one_liner = false # false/true
1407 # Positioning options
1410 # The position of arithmetic operators in wrapped expressions
1411 pos_arith = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1413 # The position of assignment in wrapped expressions.
1414 # Do not affect '=' followed by '{'
1415 pos_assign = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1417 # The position of boolean operators in wrapped expressions
1418 pos_bool = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1420 # The position of comparison operators in wrapped expressions
1421 # WARNING: Best is not unique (join lead)
1422 pos_compare = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1424 # The position of conditional (b ? t : f) operators in wrapped expressions
1425 # NOTE: is 4 worse than ignore
1426 pos_conditional = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1428 # The position of the comma in wrapped expressions
1429 # NOTE: is 2 worse than ignore
1430 pos_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1432 # The position of the comma in the constructor initialization list
1433 # WARNING: Code doesn't seem to use this feature - delete from the config?
1434 pos_class_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1436 # The position of colons between constructor and member initialization
1437 # WARNING: Code doesn't seem to use this feature - delete from the config?
1438 pos_class_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
1441 # Line Splitting options
1444 # Try to limit code width to N number of columns
1445 code_width = 0 # number
1447 # Whether to fully split long 'for' statements at semi-colons
1448 # WARNING: Code doesn't seem to use this feature - delete from the config?
1449 ls_for_split_full = false # false/true
1451 # Whether to fully split long function protos/calls at commas
1452 # WARNING: Code doesn't seem to use this feature - delete from the config?
1453 ls_func_split_full = false # false/true
1455 # Whether to split lines as close to code_width as possible and ignore some groupings
1456 # WARNING: Code doesn't seem to use this feature - delete from the config?
1457 ls_code_width = false # false/true
1460 # Blank line options
1463 # The maximum consecutive newlines
1464 nl_max = 3 # number #force
1466 # The number of newlines after a function prototype, if followed by another function prototype
1467 # WARNING: Best is not unique (0 1)
1468 nl_after_func_proto = 0 # number
1470 # The number of newlines after a function prototype, if not followed by another function prototype
1471 # WARNING: Best is not unique (0 1)
1472 nl_after_func_proto_group = 0 # number
1474 # The number of newlines after '}' of a multi-line function body
1475 nl_after_func_body = 0 # number
1477 # The number of newlines after '}' of a multi-line function body in a class declaration
1478 # WARNING: Code doesn't seem to use this feature - delete from the config?
1479 nl_after_func_body_class = 0 # number
1481 # The number of newlines after '}' of a single line function body
1482 # WARNING: Best is not unique (0 1)
1483 nl_after_func_body_one_liner = 0 # number
1485 # The minimum number of newlines before a multi-line comment.
1486 # Doesn't apply if after a brace open or another multi-line comment.
1487 # WARNING: Best is not unique (0 1)
1488 nl_before_block_comment = 0 # number
1490 # The minimum number of newlines before a single-line C comment.
1491 # Doesn't apply if after a brace open or other single-line C comments.
1492 # WARNING: Best is not unique (0 1)
1493 nl_before_c_comment = 0 # number
1495 # The minimum number of newlines before a CPP comment.
1496 # Doesn't apply if after a brace open or other CPP comments.
1497 # WARNING: Best is not unique (0 1)
1498 nl_before_cpp_comment = 0 # number
1500 # Whether to force a newline after a multi-line comment.
1501 # WARNING: Code doesn't seem to use this feature - delete from the config?
1502 nl_after_multiline_comment = false # false/true
1504 # The number of newlines after '}' or ';' of a struct/enum/union definition
1505 # WARNING: Code doesn't seem to use this feature - delete from the config?
1506 nl_after_struct = 0 # number
1508 # The number of newlines after '}' or ';' of a class definition
1509 # WARNING: Code doesn't seem to use this feature - delete from the config?
1510 nl_after_class = 0 # number
1512 # The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
1513 # Will not change the newline count if after a brace open.
1515 # WARNING: Code doesn't seem to use this feature - delete from the config?
1516 nl_before_access_spec = 0 # number
1518 # The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
1520 # WARNING: Code doesn't seem to use this feature - delete from the config?
1521 nl_after_access_spec = 0 # number
1523 # The number of newlines between a function def and the function comment.
1525 nl_comment_func_def = 0 # number
1527 # The number of newlines after a try-catch-finally block that isn't followed by a brace close.
1529 # WARNING: Code doesn't seem to use this feature - delete from the config?
1530 nl_after_try_catch_finally = 0 # number
1532 # The number of newlines before and after a property, indexer or event decl.
1534 # WARNING: Code doesn't seem to use this feature - delete from the config?
1535 nl_around_cs_property = 0 # number
1537 # The number of newlines between the get/set/add/remove handlers in C#.
1539 # WARNING: Code doesn't seem to use this feature - delete from the config?
1540 nl_between_get_set = 0 # number
1542 # Add or remove newline between C# property and the '{'
1543 # WARNING: Code doesn't seem to use this feature - delete from the config?
1544 nl_property_brace = ignore # ignore/add/remove/force
1546 # Whether to remove blank lines after '{'
1547 eat_blanks_after_open_brace = true # false/true #force
1549 # Whether to remove blank lines before '}'
1550 eat_blanks_before_close_brace = true # false/true #force
1552 # How aggressively to remove extra newlines not in preproc.
1554 # 1: Remove most newlines not handled by other config
1555 # 2: Remove all newlines and reformat completely by config
1556 # ERROR: nl_remove_extra_newlines = 1 crashes with status 139.
1557 # ERROR: nl_remove_extra_newlines = 2 crashes with status 139.
1558 # WARNING: Best is not unique (0 indent_columns)
1559 nl_remove_extra_newlines = 0 # number
1561 # Whether to put a blank line before 'return' statements, unless after an open brace.
1562 nl_before_return = false # false/true #force
1564 # Whether to put a blank line after 'return' statements, unless followed by a close brace.
1565 nl_after_return = false # false/true #force
1567 # Whether to put a newline after a Java annotation statement.
1568 # Only affects annotations that are after a newline.
1569 # WARNING: Code doesn't seem to use this feature - delete from the config?
1570 nl_after_annotation = ignore # ignore/add/remove/force
1572 # Controls the newline between two annotations.
1573 # WARNING: Code doesn't seem to use this feature - delete from the config?
1574 nl_between_annotation = ignore # ignore/add/remove/force
1577 # Code modifying options (non-whitespace)
1580 # Add or remove braces on single-line 'do' statement
1581 mod_full_brace_do = add # ignore/add/remove/force
1583 # Add or remove braces on single-line 'for' statement
1584 # NOTE: is 5 worse than ignore
1585 mod_full_brace_for = remove # ignore/add/remove/force
1587 # Add or remove braces on single-line function definitions. (Pawn)
1588 mod_full_brace_function = ignore # ignore/add/remove/force #ignore
1590 # Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
1591 mod_full_brace_if = add # ignore/add/remove/force
1593 # Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
1594 # If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
1595 mod_full_brace_if_chain = true # false/true #force
1597 # Don't remove braces around statements that span N newlines
1598 mod_full_brace_nl = 2 # number #force
1600 # Add or remove braces on single-line 'while' statement
1601 mod_full_brace_while = remove # ignore/add/remove/force
1603 # Add or remove braces on single-line 'using ()' statement
1604 # WARNING: Code doesn't seem to use this feature - delete from the config?
1605 mod_full_brace_using = ignore # ignore/add/remove/force
1607 # Add or remove unnecessary paren on 'return' statement
1608 # NOTE: is 42 worse than ignore
1609 mod_paren_on_return = remove # ignore/add/remove/force
1611 # Whether to change optional semicolons to real semicolons
1612 # WARNING: Code doesn't seem to use this feature - delete from the config?
1613 mod_pawn_semicolon = false # false/true
1615 # Add parens on 'while' and 'if' statement around bools
1616 mod_full_paren_if_bool = false # false/true
1618 # Whether to remove superfluous semicolons
1619 mod_remove_extra_semicolon = false # false/true
1621 # If a function body exceeds the specified number of newlines and doesn't have a comment after
1622 # the close brace, a comment will be added.
1623 mod_add_long_function_closebrace_comment = 0 # number
1625 # If a switch body exceeds the specified number of newlines and doesn't have a comment after
1626 # the close brace, a comment will be added.
1627 mod_add_long_switch_closebrace_comment = 0 # number
1629 # If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
1630 # the #endif, a comment will be added.
1631 mod_add_long_ifdef_endif_comment = 0 # number
1633 # If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
1634 # the #else, a comment will be added.
1635 mod_add_long_ifdef_else_comment = 0 # number
1637 # If TRUE, will sort consecutive single-line 'import' statements [Java, D]
1638 # WARNING: Code doesn't seem to use this feature - delete from the config?
1639 mod_sort_import = false # false/true
1641 # If TRUE, will sort consecutive single-line 'using' statements [C#]
1642 # WARNING: Code doesn't seem to use this feature - delete from the config?
1643 mod_sort_using = false # false/true
1645 # If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
1646 # This is generally a bad idea, as it may break your code.
1647 mod_sort_include = false # false/true
1649 # If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.
1650 # WARNING: Code doesn't seem to use this feature - delete from the config?
1651 mod_move_case_break = false # false/true
1653 # Will add or remove the braces around a fully braced case statement.
1654 # Will only remove the braces if there are no variable declarations in the block.
1655 # NOTE: is 581 worse than ignore
1656 mod_case_brace = remove # ignore/add/remove/force
1658 # If TRUE, it will remove a void 'return;' that appears as the last statement in a function.
1659 mod_remove_empty_return = true # false/true #force
1662 # Comment modifications
1665 # Try to wrap comments at cmt_width columns
1666 cmt_width = 0 # number
1668 # Set the comment reflow mode (default: 0)
1669 # 0: no reflowing (apart from the line wrapping due to cmt_width)
1670 # 1: no touching at all
1672 # WARNING: Code doesn't seem to use this feature - delete from the config?
1673 cmt_reflow_mode = 0 # number
1675 # If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
1677 cmt_indent_multi = false # false/true
1679 # Whether to group c-comments that look like they are in a block
1680 cmt_c_group = false # false/true
1682 # Whether to put an empty '/*' on the first line of the combined c-comment
1683 # WARNING: Code doesn't seem to use this feature - delete from the config?
1684 cmt_c_nl_start = false # false/true
1686 # Whether to put a newline before the closing '*/' of the combined c-comment
1687 # WARNING: Code doesn't seem to use this feature - delete from the config?
1688 cmt_c_nl_end = false # false/true
1690 # Whether to group cpp-comments that look like they are in a block
1691 # WARNING: Code doesn't seem to use this feature - delete from the config?
1692 cmt_cpp_group = false # false/true
1694 # Whether to put an empty '/*' on the first line of the combined cpp-comment
1695 # WARNING: Code doesn't seem to use this feature - delete from the config?
1696 cmt_cpp_nl_start = false # false/true
1698 # Whether to put a newline before the closing '*/' of the combined cpp-comment
1699 # WARNING: Code doesn't seem to use this feature - delete from the config?
1700 cmt_cpp_nl_end = false # false/true
1702 # Whether to change cpp-comments into c-comments
1703 cmt_cpp_to_c = false # false/true
1705 # Whether to put a star on subsequent comment lines
1706 # WARNING: Code doesn't seem to use this feature - delete from the config?
1707 cmt_star_cont = false # false/true
1709 # The number of spaces to insert at the start of subsequent comment lines
1710 # WARNING: Code doesn't seem to use this feature - delete from the config?
1711 cmt_sp_before_star_cont = 0 # number
1713 # The number of spaces to insert after the star on subsequent comment lines
1714 # WARNING: Code doesn't seem to use this feature - delete from the config?
1715 cmt_sp_after_star_cont = 0 # number
1717 # For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
1718 # the comment are the same length. Default=True
1719 # WARNING: Code doesn't seem to use this feature - delete from the config?
1720 cmt_multi_check_last = false # false/true
1722 # The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
1723 # Will substitute $(filename) with the current file's name.
1724 # WARNING: unsupported string
1725 cmt_insert_file_header = "" # string
1727 # The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
1728 # Will substitute $(filename) with the current file's name.
1729 # WARNING: unsupported string
1730 cmt_insert_file_footer = "" # string
1732 # The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
1733 # Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
1734 # Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
1735 # WARNING: unsupported string
1736 cmt_insert_func_header = "" # string
1738 # The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
1739 # Will substitute $(class) with the class name.
1740 # WARNING: unsupported string
1741 cmt_insert_class_header = "" # string
1743 # The filename that contains text to insert before a Obj-C message specification if the method isn't preceeded with a C/C++ comment.
1744 # Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
1745 cmt_insert_oc_msg_header = "" # string #ignore
1747 # If a preprocessor is encountered when stepping backwards from a function name, then
1748 # this option decides whether the comment should be inserted.
1749 # Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header. #ignore
1750 # WARNING: Code doesn't seem to use this feature - delete from the config?
1751 cmt_insert_before_preproc = false # false/true
1754 # Preprocessor options
1757 # Control indent of preprocessors inside #if blocks at brace level 0
1758 # WARNING: Indifferent... please decide manually.
1759 pp_indent = ignore # ignore/add/remove/force
1761 # Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)
1762 pp_indent_at_level = false # false/true
1764 # If pp_indent_at_level=false, specifies the number of columns to indent per level. Default=1.
1765 # WARNING: Code doesn't seem to use this feature - delete from the config?
1766 pp_indent_count = 0 # number
1768 # Add or remove space after # based on pp_level of #if blocks
1769 # NOTE: is 28 worse than ignore
1770 pp_space = remove # ignore/add/remove/force
1772 # Sets the number of spaces added with pp_space
1773 # WARNING: Code doesn't seem to use this feature - delete from the config?
1774 pp_space_count = 0 # number
1776 # The indent for #region and #endregion in C# and '#pragma region' in C/C++
1777 # WARNING: Code doesn't seem to use this feature - delete from the config?
1778 pp_indent_region = 0 # number
1780 # Whether to indent the code between #region and #endregion
1781 # WARNING: Code doesn't seem to use this feature - delete from the config?
1782 pp_region_indent_code = false # false/true
1784 # If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level
1785 # WARNING: Code doesn't seem to use this feature - delete from the config?
1786 pp_indent_if = 0 # number
1788 # Control whether to indent the code between #if, #else and #endif when not at file-level
1789 pp_if_indent_code = false # false/true
1791 # Whether to indent '#define' at the brace level (true) or from column 1 (false)
1792 pp_define_at_level = true # false/true
1794 # You can force a token to be a type with the 'type' option.
1796 # type myfoo1 myfoo2
1810 # You can create custom macro-based indentation using macro-open,
1811 # macro-else and macro-close.
1813 # macro-open BEGIN_TEMPLATE_MESSAGE_MAP
1814 # macro-open BEGIN_MESSAGE_MAP
1815 # macro-close END_MESSAGE_MAP
1817 # You can assign any keyword to any type with the set option.
1818 # set func_call_user _ N_
1823 macro-close ENDCLASS
1826 set func_call_user _
1829 # The full syntax description of all custom definition config entries
1832 # define custom tokens as:
1833 # - embed whitespace in token using '' escape character, or
1834 # put token in quotes
1835 # - these: ' " and ` are recognized as quote delimiters
1837 # type token1 token2 token3 ...
1838 # ^ optionally specify multiple tokens on a single line
1839 # define def_token output_token
1840 # ^ output_token is optional, then NULL is assumed
1844 # set id token1 token2 ...
1845 # ^ optionally specify multiple tokens on a single line
1846 # ^ id is one of the names in token_enum.h sans the CT_ prefix,
1849 # all tokens are separated by any mix of ',' commas, '=' equal signs
1850 # and whitespace (space, tab)