seta crosshair_ring_minelayer_alpha 0.15
seta crosshair_ring_reload 1 "main cvar to enable or disable ammo crosshair rings"
-seta crosshair_ring_reload_inner 1 "allow switching to inner ring when the main ring is already used by the weapon"
seta crosshair_ring_reload_size 2.5 "reload ring size"
seta crosshair_ring_reload_alpha 0.2 "reload ring alpha"
v_deathtilt 0 // needed for spectators (who are dead to avoid prediction)
// these settings determine how much the view is affected by movement/damage
-cl_deathfade 1 // fade screen to dark red when dead, value represents how fast the fade is (higher is faster)
+cl_smoothviewheight 0.05 // time of the averaging to the viewheight value so that it creates a smooth transition for crouching and such. 0 for instant transition
+cl_deathfade 0 // fade screen to dark red when dead, value represents how fast the fade is (higher is faster)
cl_bobcycle 0 // how long the cycle of up/down view movement takes (only works if cl_bob is not 0), default is 0.6
cl_bob 0.01 // how much view moves up/down when moving (does not move if cl_bobcycle is 0, but still enables cl_bobmodel), default is 0.02
cl_bob2cycle 0 // how long the cycle of left/right view movement takes (only works if cl_bob2 is not 0), default is 0.6
v_kicktime 0 // how long damage kicks of the view last, default is 0 seconds
gl_polyblend 0 // whether to use screen tints, this has now been replaced by a better system in CSQC
r_motionblur 0 // motion blur value, default is 0
-r_damageblur 0 // motion blur when damaged, default is 0
+r_damageblur 0 // motion blur when damaged, default is 0 (removed in Xonotic)
r_bloom_blur 8
r_bloom_brighten 3
set g_respawn_ghosts_speed 5 "the speed with which respawn ghosts float and rotate"
set g_respawn_ghosts_maxtime 6 "maximum amount of time a respawn ghost can last, minimum time is half this value. 0 disables and ghosts fade when the body would"
+set sv_gibhealth 100 "Minus health a dead body must have in order to get gibbed"
+
// fragmessage: This allows extra information to be displayed with the frag centerprints.
set sv_fragmessage_information_ping 1 "Enable ping display information, 0 = Never display; 1 = Always display (If the player is a bot, it will say bot instead of the ping.)"
set sv_fragmessage_information_handicap 1 "Enable handicap display information, 0 = Never display; 1 = Only when the player has handicap on; 2 = Always display (Displays Off if off)"
seta bot_prefix [BOT] "Prefix in front of the bot names"
seta bot_suffix "" "Suffix behind the bot names"
seta skill_auto 0 "when 1, \"skill\" gets adjusted to match the best player on the map"
+set bot_debug_tracewalk 0 "Enable visual indicators for short-term navigation. Green: Goal Reached / Yellow: Obstacle found / Red: Unsolvable obstacle found"
+set bot_debug_goalstack 0 "Visualize the current path that each bot is following. Use with as few bots as possible."
+set bot_wander_enable 1 "Have bots wander around if they are unable to reach any useful goal. Disable only for debugging purposes."
// general bot AI cvars
set bot_ai_thinkinterval 0.05
set bot_ai_strategyinterval 5 "How often a new objective is chosen"
set g_norecoil 0 "if set to 1 shooting weapons won't make you crosshair to move upwards (recoil)"
set g_maplist_mostrecent "" "contains the name of the maps that were most recently played"
seta g_maplist_mostrecent_count 3 "number of most recent maps that are blocked from being played again"
-seta g_maplist "g-23" "the list of maps to be cycled among (is autogenerated if empty)"
+seta g_maplist "" "the list of maps to be cycled among (is autogenerated if empty)"
seta g_maplist_index 0 "this is used internally for saving position in maplist cycle"
seta g_maplist_selectrandom 0 "if 1, a random map will be chosen as next map - DEPRECATED in favor of g_maplist_shuffle"
seta g_maplist_shuffle 1 "new randomization method: like selectrandom, but avoid playing the same maps in short succession. This works by taking out the first element and inserting it into g_maplist with a bias to the end of the list"
set g_multijump_speed -999999 "Minimum vertical speed a player must have in order to jump again"
// effects
+r_glsl_postprocess 1
r_picmipsprites 0 // Xonotic uses sprites that should never be picmipped (team mate, typing, waypoints)
r_picmipworld 1
gl_picmip_world 0
seta hud_panel_ammo_maxammo "40" "when you have this much ammo, the ammo status bar is full"
-seta hud_panel_healtharmor_maxhealth "250" "when you have this much health, the health status bar is full"
-seta hud_panel_healtharmor_maxarmor "150" "when you have this much armor, the armor status bar is full"
+seta hud_panel_healtharmor_maxhealth "200" "when you have this much health, the health status bar is full"
+seta hud_panel_healtharmor_maxarmor "200" "when you have this much armor, the armor status bar is full"
seta hud_panel_notify_time 10 "time that a new entry stays until it fades out"
seta hud_panel_notify_fadetime 3 "fade out time"
seta hud_colorflash_alpha 0.5 "starting alpha of the color flash"
seta hud_damage 0.55 "an improved version of gl_polyblend for damage, draw an image instead when hurt"
+seta hud_damage_blur 10 "Use postprocessing to blur the screen when you have taken damage. This can be paired with current hud damage or just used alone. Higher values = more blur"
+seta hud_damage_blur_alpha 0.5 "Amount of alpha to use when merging the blurred layers back into the render. Turning this up higher will remove bloom, so it's best to find a balance"
seta hud_damage_gentle_alpha_multiplier 0.10 "how much to multiply alpha of flash when using the cl_gentle version, it's much more opaque than the non-gentle version"
seta hud_damage_gentle_color "1 0.7 1" "color of flash for cl_gentle version"
seta hud_damage_color "1 0 0" "color of flash"
seta hud_damage_pain_threshold_pulsating_min 0.6 "minimum value when calculating the pulse: max(pulsating_min, fabs(sin(PI * time / period))"
seta hud_damage_pain_threshold_pulsating_period 0.8 "one pulse every X seconds"
+seta hud_powerup 0 "power of the sharpen effect when owning the shield or strength powerups, default is 0.5"
+
+seta hud_postprocessing 1 "enables the ability for effects such as hud_damage_blur and hud_contents to apply a postprocessing method upon the screen - enabling this disables manual editing of the postprocess cvars"
+seta hud_postprocessing_maxbluralpha 0 "maximum alpha which the blur postprocess can be, default is 0.5"
+seta hud_postprocessing_maxblurradius 8 "maximum radius which the blur postprocess can be, default is 8"
+
seta hud_contents 1 "an improved version of gl_polyblend for liquids such as water/lava/slime, draw a filler when inside the liquid"
+seta hud_contents_blur 10 "Use postprocessing to blur the screen when you are inside a liquid. Higher values = more blur"
+seta hud_contents_blur_alpha 0.5 "Amount of alpha to use when merging the blurred layers back into the render. Turning this up higher will remove bloom, so it's best to find a balance"
seta hud_contents_factor 1 "factor at which to multiply the current faded value."
seta hud_contents_fadeintime 0.02 "factor of time it takes for the alpha level to reach normal value when entering the liquid"
seta hud_contents_fadeouttime 0.1 "factor of time it takes for the alpha level to reach normal value when leaving the liquid"
alias allready "sv_cmd allready"
-seta cl_weaponpriority "minstanex rocketlauncher nex minelayer grenadelauncher fireball hlac hagar seeker crylink sniperrifle uzi electro tuba shotgun laser hook porto" "weapon priority list"
+seta cl_weaponpriority "minstanex rocketlauncher nex grenadelauncher minelayer fireball hlac hagar seeker crylink sniperrifle uzi electro tuba shotgun laser hook porto" "weapon priority list"
seta cl_weaponpriority_useforcycling 0 "when set, weapon cycling by the mouse wheel makes use of the weapon priority list (the special value 2 uses the weapon ID list for cycling)"
seta cl_weaponpriority0 "rocketlauncher grenadelauncher hagar seeker fireball" "use impulse 200 for prev gun from this list, 210 for best gun, 220 for next gun. Default value: explosives"
seta cl_weaponpriority1 "minstanex nex crylink hlac electro laser" "use impulse 201 for prev gun from this list, 211 for best gun, 221 for next gun. Default value: energy"
seta cl_weaponpriority2 "minstanex nex sniperrifle" "use impulse 202 for prev gun from this list, 212 for best gun, 222 for next gun. Default value: hitscan exact"
seta cl_weaponpriority3 "minstanex nex sniperrifle uzi shotgun" "use impulse 203 for prev gun from this list, 213 for best gun, 223 for next gun. Default value: hitscan all"
-seta cl_weaponpriority4 "minelayer grenadelauncher hlac hagar crylink seeker shotgun" "use impulse 204 for prev gun from this list, 214 for best gun, 224 for next gun. Default value: spam weapons"
+seta cl_weaponpriority4 "grenadelauncher minelayer hlac hagar crylink seeker shotgun" "use impulse 204 for prev gun from this list, 214 for best gun, 224 for next gun. Default value: spam weapons"
seta cl_weaponpriority5 "laser hook porto" "use impulse 205 for prev gun from this list, 215 for best gun, 225 for next gun. Default value: weapons for moving"
seta cl_weaponpriority6 "" "use impulse 206 for prev gun from this list, 216 for best gun, 226 for next gun"
seta cl_weaponpriority7 "" "use impulse 207 for prev gun from this list, 217 for best gun, 227 for next gun"
scr_loadingscreen_scale_base 1
scr_loadingscreen_scale_limit 1
+// sRGB configuration (EXPERIMENTAL, needs maps to be relit)
+alias sRGBcorrect_on "r_texture_sRGB_skin_diffuse 1;r_texture_sRGB_skin_gloss 1;r_texture_sRGB_skin_glow 1;r_texture_sRGB_reflect 1;r_texture_sRGB_skybox 1;v_gamma 2.2;r_restart"
+alias sRGBcorrect_off "r_texture_sRGB_skin_diffuse 0;r_texture_sRGB_skin_gloss 0;r_texture_sRGB_skin_glow 0;r_texture_sRGB_reflect 0;r_texture_sRGB_skybox 0;v_gamma 1.0;r_restart"
+
// other config files
exec balanceXonotic.cfg
exec ctfscoring-ai.cfg