cl_bobfallspeed 200 "necessary amount of speed for bob-falling to occur"
cl_bobmodel 1 // whether to have gun model move around on screen when moving (only works if cl_bob is not 0), default is 1
cl_bobmodel_side 0.2 // amount the gun sways to the sides
-cl_bobmodel_speed 5 // rate at which the gun sways
+cl_bobmodel_speed 10 // rate at which the gun sways
cl_bobmodel_up 0.1 // amount the gun sways up and down
-cl_leanmodel 1 // enables weapon leaning effect when looking around
-cl_leanmodel_side_speed 0.7 "gun leaning sideways speed"
-cl_leanmodel_side_limit 35 "gun leaning sideways limit"
-cl_leanmodel_side_highpass1 30 "gun leaning sideways pre-highpass in 1/s"
-cl_leanmodel_side_highpass 3 "gun leaning sideways highpass in 1/s"
-cl_leanmodel_side_lowpass 20 "gun leaning sideways lowpass in 1/s"
-cl_leanmodel_up_speed 0.65 "gun leaning upward speed"
-cl_leanmodel_up_limit 50 "gun leaning upward limit"
-cl_leanmodel_up_highpass1 5 "gun leaning upward pre-highpass in 1/s"
-cl_leanmodel_up_highpass 15 "gun leaning upward highpass in 1/s"
-cl_leanmodel_up_lowpass 20 "gun leaning upward lowpass in 1/s"
+
cl_followmodel 1 // enables weapon pushing / pulling effect when walking
-cl_followmodel_side_speed 0.25 "gun following sideways speed"
-cl_followmodel_side_limit 6 "gun following sideways limit"
-cl_followmodel_side_highpass1 30 "gun following sideways pre-highpass in 1/s"
-cl_followmodel_side_highpass 5 "gun following sideways highpass in 1/s"
-cl_followmodel_side_lowpass 10 "gun following sideways lowpass in 1/s"
-cl_followmodel_up_speed 0.5 "gun following upward speed"
-cl_followmodel_up_limit 5 "gun following upward limit"
-cl_followmodel_up_highpass1 60 "gun following upward pre-highpass in 1/s"
-cl_followmodel_up_highpass 2 "gun following upward highpass in 1/s"
-cl_followmodel_up_lowpass 10 "gun following upward lowpass in 1/s"
+seta cl_followmodel_speed 0.3 "gun following speed"
+seta cl_followmodel_limit 135 "gun following limit"
+seta cl_followmodel_velocity_absolute 0 "make the effect ignore velocity direction changes (side effect: it causes a glitch when teleporting / passing through a warpzone)"
+seta cl_followmodel_velocity_lowpass 0.05 "gun following velocity lowpass averaging time"
+seta cl_followmodel_highpass 0.05 "gun following highpass averaging time"
+seta cl_followmodel_lowpass 0.03 "gun following lowpass averaging time"
+
+cl_leanmodel 1 // enables weapon leaning effect when looking around
+seta cl_leanmodel_speed 0.3 "gun leaning speed"
+seta cl_leanmodel_limit 30 "gun leaning limit"
+seta cl_leanmodel_highpass1 0.2 "gun leaning pre-highpass averaging time"
+seta cl_leanmodel_highpass 0.2 "gun leaning highpass averaging time"
+seta cl_leanmodel_lowpass 0.05 "gun leaning lowpass averaging time"
cl_rollangle 0 // amount of view tilt when strafing, default is 2.0
v_kicktime 0 // how long damage kicks of the view last, default is 0 seconds
set sv_spectator_speed_multiplier 1.5
seta sv_spectate 1 "if set to 1, new clients are allowed to spectate or observe the game, if set to 0 joining clients spawn as players immediately (no spectating)"
seta sv_defaultcharacter 0 "master switch, if set to 1 the further configuration for replacing all player models, skins and colors is taken from the sv_defaultplayermodel, sv_defaultplayerskin and sv_defaultplayercolors variables"
+seta sv_defaultcharacterskin 0 "if set to 1 the further configuration for replacing all skins is taken from the sv_defaultplayerskin variables"
seta sv_defaultplayermodel "models/player/erebus.iqm" "default model selection, only works if sv_defaultcharacter is set to 1; you may append a :<skinnumber> suffix to model names; you can specify multiple, separated by space, and a random one will be chosen"
seta sv_defaultplayerskin 0 "each model has 1 or more skins (combination of model and skin = character), set which skin of the model you wish the default character to have, only works if sv_defaultcharacter is set to 1; can be overriden by :<skinnumber> suffix in sv_defaultplayermodel"
seta sv_defaultplayermodel_red "" "\"\" means see sv_defaultplayermodel"
locs_enable 0
pausable 0
set g_spawnshieldtime 1 "number of seconds you are invincible after you spawned, this shield is lost after you fire"
+set g_spawnshield_blockdamage 1 "how much spawn shield protects you from damage (1 = full protection)"
set g_antilag 2 "AntiLag (0 = no AntiLag, 1 = verified client side hit scan, 2 = server side hit scan in the past, 3 = unverified client side hit scan)"
set g_antilag_nudge 0 "don't touch"
set g_shootfromeye 0 "shots are fired from your eye/crosshair; visual gun position can still be influenced by cl_gunalign 1 and 2"
seta teamplay_mode 4 "default teamplay setting in team games. 1 = no friendly fire, self damage. 2 = friendly fire and self damage enabled. 3 = no friendly fire, but self damage enabled. 4 = obey the cvars g_mirrordamage*, g_friendlyfire* and g_teamdamage_threshold*"
seta g_mirrordamage 0.700000 "for teamplay 4: mirror damage factor"
seta g_mirrordamage_virtual 1 "for teamplay 4: do not actually apply mirror damage, just show graphics effect for it"
+seta g_mirrordamage_onlyweapons 0 "for teamplay 4: only apply mirror damage if the attack was from a weapon"
seta g_friendlyfire 0.500000 "for teamplay 4: fiendly fire factor"
seta g_friendlyfire_virtual 1 "for teamplay 4: do not actually apply friendly fire, just show graphics effect for it"
seta g_friendlyfire_virtual_force 1 "for teamplay 4: apply force even though damage was made virtual only"
seta g_waypointsprite_turrets_maxdist 5000 "max distace for turret sprites"
seta g_waypointsprite_tactical 1 "tactical overlay on turrets when in a vehicle"
+seta cl_damagetext "1" "Draw damage dealt where you hit the enemy"
+seta cl_damagetext_format "-{total}" "How to format the damage text. {health}, {armor}, {total}"
+seta cl_damagetext_color "1 1 0" "Damage text color"
+seta cl_damagetext_color_per_weapon "0" "Damage text uses weapon color"
+seta cl_damagetext_size "8" "Damage text font size"
+seta cl_damagetext_alpha_start "1" "Damage text initial alpha"
+seta cl_damagetext_alpha_lifetime "3" "Damage text lifetime in seconds"
+seta cl_damagetext_velocity "0 0 20" "Damage text move direction"
+seta cl_damagetext_offset "0 -40 0" "Damage text offset"
+seta cl_damagetext_accumulate_range "30" "Damage text spawned within this range is accumulated"
+seta cl_damagetext_friendlyfire "1" "Show damage text for friendlyfire too"
+seta cl_damagetext_friendlyfire_color "1 0 0" "Damage text color for friendlyfire"
+
set sv_itemstime 1 "enable networking of left time until respawn for items such as mega health and large armor"
// so it can be stuffcmd-ed still
seta menu_tooltips 1 "menu tooltips: 0 disabled, 1 enabled, 2 also shows cvar or console command (when available) changed or executed by the item"
set menu_picmip_bypass 0 "bypass texture quality enforcement based on system resources, not recommended and may cause crashes!"
set menu_showboxes 0 "show item bounding boxes (debug)"
+set menu_cvarlist_onlymodified 0 "show only modified cvars in the cvar list"
+set menu_force_on_disconnection 1 "force to show the menu this number of seconds after you get disconnected (0 to disable)"
r_textbrightness 0.2
r_textcontrast 0.8
seta scoreboard_offset_vertical 0.05 "how far (by percent) the scoreboard is offset from the top and bottom of the screen"
seta scoreboard_bg_scale 0.25 "scale for the tiled scoreboard background"
seta scoreboard_respawntime_decimals 1 "decimal places to show for the respawntime countdown display on the scoreboard"
+seta scoreboard_dynamichud 0 "apply the dynamic hud effects to the scoreboard"
seta accuracy_color_levels "0 20 100" "accuracy values at which a specified color (accuracy_color<X>) will be used. If your accuracy is between 2 of these values then a mix of the Xth and X+1th colors will be used. You can specify up to 10 values, in increasing order"
seta accuracy_color0 "1 0 0"
gl_texturecompression_q3bsplightmaps 0
gl_texturecompression_sky 1
+cl_maxfps 125
+
seta menu_mouse_absolute 1 "use the OS mouse pointer motion for menu"
seta menu_mouse_speed 1 "speed multiplier for the mouse in the menu (does not affect in-game aiming)"
set menu_use_default_hostname 1
set sv_maxidle 0 "kick players idle for more than this amount of time in seconds"
set sv_maxidle_spectatorsareidle 0 "when sv_maxidle is not 0, assume spectators are idle too"
+set sv_maxidle_slots 0 "when not 0, only kick idlers when this many or less player slots are available"
+set sv_maxidle_slots_countbots 1 "count bots as player slots"
// these entities are not referenced by anything directly, they just represent
// teams and are found by find() when needed
seta cl_forcemyplayerskin 0 "set to the skin number you want to show yourself as (does not affect how enemies look with cl_forceplayermodels)"
seta cl_forcemyplayercolors 0 "set to the color value (encoding is same as _cl_color) for your own player model (ignored in teamplay; does not affect how enemies look with cl_forceplayermodels)"
seta cl_movement_errorcompensation 1 "try to compensate for prediction errors and reduce preceived lag"
+seta cl_movement_intermissionrunning 0 "keep velocity after the match ends, players may appear to continue running while stationary"
// campaign internal, set when loading a campaign map1G
set _campaign_index ""
set g_frozen_force 0.6 "How much to multiply the force on a frozen player with"
// player statistics server URI
-set g_playerstats_uri "" "Output player statistics information to either: URL (with ://), console (with a dash like this: -), or supply a filename to output to data directory."
+set g_playerstats_gamereport_uri "http://stats.xonotic.org/stats/submit" "Output player statistics information to either: URL (with ://), console (with a dash like this: -), or supply a filename to output to data directory."
// autoscreenshots
set g_max_info_autoscreenshot 3 "how many info_autoscreenshot entities are allowed"
exec effects-normal.cfg
exec physicsX.cfg
exec turrets.cfg
-exec vehicles.cfg
exec crosshairs.cfg
exec gamemodes.cfg
exec mutators.cfg