#include "quakedef.h"
#include "image.h"
#include "r_shadow.h"
+#include "polygon.h"
+#include "curves.h"
+#include "wad.h"
-// note: model_shared.c sets up r_notexture, and r_surf_notexture
-
-qbyte mod_q1bsp_novis[(MAX_MAP_LEAFS + 7)/ 8];
//cvar_t r_subdivide_size = {CVAR_SAVE, "r_subdivide_size", "128"};
cvar_t halflifebsp = {0, "halflifebsp", "0"};
cvar_t r_miplightmaps = {CVAR_SAVE, "r_miplightmaps", "0"};
cvar_t r_lightmaprgba = {0, "r_lightmaprgba", "1"};
cvar_t r_nosurftextures = {0, "r_nosurftextures", "0"};
-cvar_t r_sortsurfaces = {0, "r_sortsurfaces", "0"};
+cvar_t r_subdivisions_tolerance = {0, "r_subdivisions_tolerance", "4"};
+cvar_t r_subdivisions_mintess = {0, "r_subdivisions_mintess", "1"};
+cvar_t r_subdivisions_maxtess = {0, "r_subdivisions_maxtess", "1024"};
+cvar_t r_subdivisions_maxvertices = {0, "r_subdivisions_maxvertices", "65536"};
+cvar_t r_subdivisions_collision_tolerance = {0, "r_subdivisions_collision_tolerance", "15"};
+cvar_t r_subdivisions_collision_mintess = {0, "r_subdivisions_collision_mintess", "1"};
+cvar_t r_subdivisions_collision_maxtess = {0, "r_subdivisions_collision_maxtess", "1024"};
+cvar_t r_subdivisions_collision_maxvertices = {0, "r_subdivisions_collision_maxvertices", "4225"};
+cvar_t mod_q3bsp_curves_collisions = {0, "mod_q3bsp_curves_collisions", "1"};
+cvar_t mod_q3bsp_optimizedtraceline = {0, "mod_q3bsp_optimizedtraceline", "1"};
+cvar_t mod_q3bsp_debugtracebrush = {0, "mod_q3bsp_debugtracebrush", "0"};
void Mod_BrushInit(void)
{
Cvar_RegisterVariable(&r_miplightmaps);
Cvar_RegisterVariable(&r_lightmaprgba);
Cvar_RegisterVariable(&r_nosurftextures);
- Cvar_RegisterVariable(&r_sortsurfaces);
- memset(mod_q1bsp_novis, 0xff, sizeof(mod_q1bsp_novis));
+ Cvar_RegisterVariable(&r_subdivisions_tolerance);
+ Cvar_RegisterVariable(&r_subdivisions_mintess);
+ Cvar_RegisterVariable(&r_subdivisions_maxtess);
+ Cvar_RegisterVariable(&r_subdivisions_maxvertices);
+ Cvar_RegisterVariable(&r_subdivisions_collision_tolerance);
+ Cvar_RegisterVariable(&r_subdivisions_collision_mintess);
+ Cvar_RegisterVariable(&r_subdivisions_collision_maxtess);
+ Cvar_RegisterVariable(&r_subdivisions_collision_maxvertices);
+ Cvar_RegisterVariable(&mod_q3bsp_curves_collisions);
+ Cvar_RegisterVariable(&mod_q3bsp_optimizedtraceline);
+ Cvar_RegisterVariable(&mod_q3bsp_debugtracebrush);
}
static mleaf_t *Mod_Q1BSP_PointInLeaf(model_t *model, const vec3_t p)
// LordHavoc: modified to start at first clip node,
// in other words: first node of the (sub)model
- node = model->brushq1.nodes + model->brushq1.hulls[0].firstclipnode;
- while (node->contents == 0)
+ node = model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode;
+ while (node->plane)
node = node->children[(node->plane->type < 3 ? p[node->plane->type] : DotProduct(p,node->plane->normal)) < node->plane->dist];
return (mleaf_t *)node;
}
-static int Mod_Q1BSP_PointContents(model_t *model, const vec3_t p)
+static void Mod_Q1BSP_AmbientSoundLevelsForPoint(model_t *model, const vec3_t p, qbyte *out, int outsize)
{
- mnode_t *node;
-
- if (model == NULL)
- return CONTENTS_EMPTY;
+ int i;
+ mleaf_t *leaf;
+ leaf = Mod_Q1BSP_PointInLeaf(model, p);
+ if (leaf)
+ {
+ i = min(outsize, (int)sizeof(leaf->ambient_sound_level));
+ if (i)
+ {
+ memcpy(out, leaf->ambient_sound_level, i);
+ out += i;
+ outsize -= i;
+ }
+ }
+ if (outsize)
+ memset(out, 0, outsize);
+}
- Mod_CheckLoaded(model);
+static int Mod_Q1BSP_BoxTouchingPVS(model_t *model, const qbyte *pvs, const vec3_t mins, const vec3_t maxs)
+{
+ int clusterindex, side, nodestackindex = 0;
+ mnode_t *node, *nodestack[1024];
+ if (!model->brush.num_pvsclusters)
+ return true;
+ node = model->brush.data_nodes;
+ for (;;)
+ {
+ if (node->plane)
+ {
+ // node - recurse down the BSP tree
+ side = BoxOnPlaneSide(mins, maxs, node->plane) - 1;
+ if (side < 2)
+ {
+ // box is on one side of plane, take that path
+ node = node->children[side];
+ }
+ else
+ {
+ // box crosses plane, take one path and remember the other
+ if (nodestackindex < 1024)
+ nodestack[nodestackindex++] = node->children[0];
+ node = node->children[1];
+ }
+ }
+ else
+ {
+ // leaf - check cluster bit
+ clusterindex = ((mleaf_t *)node)->clusterindex;
+ if (CHECKPVSBIT(pvs, clusterindex))
+ {
+ // it is visible, return immediately with the news
+ return true;
+ }
+ else
+ {
+ // nothing to see here, try another path we didn't take earlier
+ if (nodestackindex == 0)
+ break;
+ node = nodestack[--nodestackindex];
+ }
+ }
+ }
+ // it is not visible
+ return false;
+}
- // LordHavoc: modified to start at first clip node,
- // in other words: first node of the (sub)model
- node = model->brushq1.nodes + model->brushq1.hulls[0].firstclipnode;
- while (node->contents == 0)
- node = node->children[(node->plane->type < 3 ? p[node->plane->type] : DotProduct(p,node->plane->normal)) < node->plane->dist];
+static int Mod_Q1BSP_BoxTouchingLeafPVS(model_t *model, const qbyte *pvs, const vec3_t mins, const vec3_t maxs)
+{
+ int clusterindex, side, nodestackindex = 0;
+ mnode_t *node, *nodestack[1024];
+ if (!model->brush.num_leafs)
+ return true;
+ node = model->brush.data_nodes;
+ for (;;)
+ {
+ if (node->plane)
+ {
+ // node - recurse down the BSP tree
+ side = BoxOnPlaneSide(mins, maxs, node->plane) - 1;
+ if (side < 2)
+ {
+ // box is on one side of plane, take that path
+ node = node->children[side];
+ }
+ else
+ {
+ // box crosses plane, take one path and remember the other
+ if (nodestackindex < 1024)
+ nodestack[nodestackindex++] = node->children[0];
+ node = node->children[1];
+ }
+ }
+ else
+ {
+ // leaf - check cluster bit
+ clusterindex = ((mleaf_t *)node) - model->brush.data_leafs;
+ if (CHECKPVSBIT(pvs, clusterindex))
+ {
+ // it is visible, return immediately with the news
+ return true;
+ }
+ else
+ {
+ // nothing to see here, try another path we didn't take earlier
+ if (nodestackindex == 0)
+ break;
+ node = nodestack[--nodestackindex];
+ }
+ }
+ }
+ // it is not visible
+ return false;
+}
- return ((mleaf_t *)node)->contents;
+static int Mod_Q1BSP_BoxTouchingVisibleLeafs(model_t *model, const qbyte *visibleleafs, const vec3_t mins, const vec3_t maxs)
+{
+ int side, nodestackindex = 0;
+ mnode_t *node, *nodestack[1024];
+ node = model->brush.data_nodes;
+ for (;;)
+ {
+ if (node->plane)
+ {
+ // node - recurse down the BSP tree
+ side = BoxOnPlaneSide(mins, maxs, node->plane) - 1;
+ if (side < 2)
+ {
+ // box is on one side of plane, take that path
+ node = node->children[side];
+ }
+ else
+ {
+ // box crosses plane, take one path and remember the other
+ if (nodestackindex < 1024)
+ nodestack[nodestackindex++] = node->children[0];
+ node = node->children[1];
+ }
+ }
+ else
+ {
+ // leaf - check if it is visible
+ if (visibleleafs[(mleaf_t *)node - model->brush.data_leafs])
+ {
+ // it is visible, return immediately with the news
+ return true;
+ }
+ else
+ {
+ // nothing to see here, try another path we didn't take earlier
+ if (nodestackindex == 0)
+ break;
+ node = nodestack[--nodestackindex];
+ }
+ }
+ }
+ // it is not visible
+ return false;
}
typedef struct findnonsolidlocationinfo_s
}
findnonsolidlocationinfo_t;
-#if 0
-extern cvar_t samelevel;
-#endif
static void Mod_Q1BSP_FindNonSolidLocation_r_Leaf(findnonsolidlocationinfo_t *info, mleaf_t *leaf)
{
- int i, surfnum, k, *tri, *mark;
+ int i, surfacenum, k, *tri, *mark;
float dist, f, vert[3][3], edge[3][3], facenormal[3], edgenormal[3][3], point[3];
-#if 0
- float surfnormal[3];
-#endif
- msurface_t *surf;
- surfmesh_t *mesh;
- for (surfnum = 0, mark = leaf->firstmarksurface;surfnum < leaf->nummarksurfaces;surfnum++, mark++)
+ msurface_t *surface;
+ for (surfacenum = 0, mark = leaf->firstleafsurface;surfacenum < leaf->numleafsurfaces;surfacenum++, mark++)
{
- surf = info->model->brushq1.surfaces + *mark;
- if (surf->flags & SURF_SOLIDCLIP)
+ surface = info->model->data_surfaces + *mark;
+ if (surface->texture->supercontents & SUPERCONTENTS_SOLID)
{
-#if 0
- VectorCopy(surf->plane->normal, surfnormal);
- if (surf->flags & SURF_PLANEBACK)
- VectorNegate(surfnormal, surfnormal);
-#endif
- for (mesh = surf->mesh;mesh;mesh = mesh->chain)
+ for (k = 0;k < surface->num_triangles;k++)
{
- for (k = 0;k < mesh->numtriangles;k++)
+ tri = (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle) + k * 3;
+ VectorCopy((surface->groupmesh->data_vertex3f + tri[0] * 3), vert[0]);
+ VectorCopy((surface->groupmesh->data_vertex3f + tri[1] * 3), vert[1]);
+ VectorCopy((surface->groupmesh->data_vertex3f + tri[2] * 3), vert[2]);
+ VectorSubtract(vert[1], vert[0], edge[0]);
+ VectorSubtract(vert[2], vert[1], edge[1]);
+ CrossProduct(edge[1], edge[0], facenormal);
+ if (facenormal[0] || facenormal[1] || facenormal[2])
{
- tri = mesh->element3i + k * 3;
- VectorCopy((mesh->vertex3f + tri[0] * 3), vert[0]);
- VectorCopy((mesh->vertex3f + tri[1] * 3), vert[1]);
- VectorCopy((mesh->vertex3f + tri[2] * 3), vert[2]);
- VectorSubtract(vert[1], vert[0], edge[0]);
- VectorSubtract(vert[2], vert[1], edge[1]);
- CrossProduct(edge[1], edge[0], facenormal);
- if (facenormal[0] || facenormal[1] || facenormal[2])
+ VectorNormalize(facenormal);
+ f = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
+ if (f <= info->bestdist && f >= -info->bestdist)
{
- VectorNormalize(facenormal);
-#if 0
- if (VectorDistance(facenormal, surfnormal) > 0.01f)
- Con_Printf("a2! %f %f %f != %f %f %f\n", facenormal[0], facenormal[1], facenormal[2], surfnormal[0], surfnormal[1], surfnormal[2]);
-#endif
- f = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
- if (f <= info->bestdist && f >= -info->bestdist)
+ VectorSubtract(vert[0], vert[2], edge[2]);
+ VectorNormalize(edge[0]);
+ VectorNormalize(edge[1]);
+ VectorNormalize(edge[2]);
+ CrossProduct(facenormal, edge[0], edgenormal[0]);
+ CrossProduct(facenormal, edge[1], edgenormal[1]);
+ CrossProduct(facenormal, edge[2], edgenormal[2]);
+ // face distance
+ if (DotProduct(info->center, edgenormal[0]) < DotProduct(vert[0], edgenormal[0])
+ && DotProduct(info->center, edgenormal[1]) < DotProduct(vert[1], edgenormal[1])
+ && DotProduct(info->center, edgenormal[2]) < DotProduct(vert[2], edgenormal[2]))
{
- VectorSubtract(vert[0], vert[2], edge[2]);
- VectorNormalize(edge[0]);
- VectorNormalize(edge[1]);
- VectorNormalize(edge[2]);
- CrossProduct(facenormal, edge[0], edgenormal[0]);
- CrossProduct(facenormal, edge[1], edgenormal[1]);
- CrossProduct(facenormal, edge[2], edgenormal[2]);
-#if 0
- if (samelevel.integer & 1)
- VectorNegate(edgenormal[0], edgenormal[0]);
- if (samelevel.integer & 2)
- VectorNegate(edgenormal[1], edgenormal[1]);
- if (samelevel.integer & 4)
- VectorNegate(edgenormal[2], edgenormal[2]);
+ // we got lucky, the center is within the face
+ dist = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
+ if (dist < 0)
+ {
+ dist = -dist;
+ if (info->bestdist > dist)
+ {
+ info->bestdist = dist;
+ VectorScale(facenormal, (info->radius - -dist), info->nudge);
+ }
+ }
+ else
+ {
+ if (info->bestdist > dist)
+ {
+ info->bestdist = dist;
+ VectorScale(facenormal, (info->radius - dist), info->nudge);
+ }
+ }
+ }
+ else
+ {
+ // check which edge or vertex the center is nearest
for (i = 0;i < 3;i++)
- if (DotProduct(vert[0], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f
- || DotProduct(vert[1], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f
- || DotProduct(vert[2], edgenormal[i]) > DotProduct(vert[i], edgenormal[i]) + 0.1f)
- Con_Printf("a! %i : %f %f %f (%f %f %f)\n", i, edgenormal[i][0], edgenormal[i][1], edgenormal[i][2], facenormal[0], facenormal[1], facenormal[2]);
-#endif
- // face distance
- if (DotProduct(info->center, edgenormal[0]) < DotProduct(vert[0], edgenormal[0])
- && DotProduct(info->center, edgenormal[1]) < DotProduct(vert[1], edgenormal[1])
- && DotProduct(info->center, edgenormal[2]) < DotProduct(vert[2], edgenormal[2]))
{
- // we got lucky, the center is within the face
- dist = DotProduct(info->center, facenormal) - DotProduct(vert[0], facenormal);
- if (dist < 0)
+ f = DotProduct(info->center, edge[i]);
+ if (f >= DotProduct(vert[0], edge[i])
+ && f <= DotProduct(vert[1], edge[i]))
{
- dist = -dist;
+ // on edge
+ VectorMA(info->center, -f, edge[i], point);
+ dist = sqrt(DotProduct(point, point));
if (info->bestdist > dist)
{
info->bestdist = dist;
- VectorScale(facenormal, (info->radius - -dist), info->nudge);
+ VectorScale(point, (info->radius / dist), info->nudge);
}
+ // skip both vertex checks
+ // (both are further away than this edge)
+ i++;
}
else
{
+ // not on edge, check first vertex of edge
+ VectorSubtract(info->center, vert[i], point);
+ dist = sqrt(DotProduct(point, point));
if (info->bestdist > dist)
{
info->bestdist = dist;
- VectorScale(facenormal, (info->radius - dist), info->nudge);
- }
- }
- }
- else
- {
- // check which edge or vertex the center is nearest
- for (i = 0;i < 3;i++)
- {
- f = DotProduct(info->center, edge[i]);
- if (f >= DotProduct(vert[0], edge[i])
- && f <= DotProduct(vert[1], edge[i]))
- {
- // on edge
- VectorMA(info->center, -f, edge[i], point);
- dist = sqrt(DotProduct(point, point));
- if (info->bestdist > dist)
- {
- info->bestdist = dist;
- VectorScale(point, (info->radius / dist), info->nudge);
- }
- // skip both vertex checks
- // (both are further away than this edge)
- i++;
- }
- else
- {
- // not on edge, check first vertex of edge
- VectorSubtract(info->center, vert[i], point);
- dist = sqrt(DotProduct(point, point));
- if (info->bestdist > dist)
- {
- info->bestdist = dist;
- VectorScale(point, (info->radius / dist), info->nudge);
- }
+ VectorScale(point, (info->radius / dist), info->nudge);
}
}
}
static void Mod_Q1BSP_FindNonSolidLocation_r(findnonsolidlocationinfo_t *info, mnode_t *node)
{
- if (node->contents)
- {
- if (((mleaf_t *)node)->nummarksurfaces)
- Mod_Q1BSP_FindNonSolidLocation_r_Leaf(info, (mleaf_t *)node);
- }
- else
+ if (node->plane)
{
float f = PlaneDiff(info->center, node->plane);
if (f >= -info->bestdist)
if (f <= info->bestdist)
Mod_Q1BSP_FindNonSolidLocation_r(info, node->children[1]);
}
+ else
+ {
+ if (((mleaf_t *)node)->numleafsurfaces)
+ Mod_Q1BSP_FindNonSolidLocation_r_Leaf(info, (mleaf_t *)node);
+ }
}
static void Mod_Q1BSP_FindNonSolidLocation(model_t *model, const vec3_t in, vec3_t out, float radius)
{
VectorClear(info.nudge);
info.bestdist = radius;
- Mod_Q1BSP_FindNonSolidLocation_r(&info, model->brushq1.nodes + model->brushq1.hulls[0].firstclipnode);
+ Mod_Q1BSP_FindNonSolidLocation_r(&info, model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode);
VectorAdd(info.center, info.nudge, info.center);
}
while (info.bestdist < radius && ++i < 10);
VectorCopy(info.center, out);
}
-static qbyte *Mod_Q1BSP_DecompressVis(model_t *model, qbyte *in)
+int Mod_Q1BSP_SuperContentsFromNativeContents(model_t *model, int nativecontents)
{
- static qbyte decompressed[MAX_MAP_LEAFS/8];
- int c;
- qbyte *out;
- int row;
+ switch(nativecontents)
+ {
+ case CONTENTS_EMPTY:
+ return 0;
+ case CONTENTS_SOLID:
+ return SUPERCONTENTS_SOLID;
+ case CONTENTS_WATER:
+ return SUPERCONTENTS_WATER;
+ case CONTENTS_SLIME:
+ return SUPERCONTENTS_SLIME;
+ case CONTENTS_LAVA:
+ return SUPERCONTENTS_LAVA;
+ case CONTENTS_SKY:
+ return SUPERCONTENTS_SKY;
+ }
+ return 0;
+}
+
+int Mod_Q1BSP_NativeContentsFromSuperContents(model_t *model, int supercontents)
+{
+ if (supercontents & SUPERCONTENTS_SOLID)
+ return CONTENTS_SOLID;
+ if (supercontents & SUPERCONTENTS_SKY)
+ return CONTENTS_SKY;
+ if (supercontents & SUPERCONTENTS_LAVA)
+ return CONTENTS_LAVA;
+ if (supercontents & SUPERCONTENTS_SLIME)
+ return CONTENTS_SLIME;
+ if (supercontents & SUPERCONTENTS_WATER)
+ return CONTENTS_WATER;
+ return CONTENTS_EMPTY;
+}
- row = (model->brushq1.numleafs+7)>>3;
- out = decompressed;
+typedef struct
+{
+ // the hull we're tracing through
+ const hull_t *hull;
- do
+ // the trace structure to fill in
+ trace_t *trace;
+
+ // start, end, and end - start (in model space)
+ double start[3];
+ double end[3];
+ double dist[3];
+}
+RecursiveHullCheckTraceInfo_t;
+
+// 1/32 epsilon to keep floating point happy
+#define DIST_EPSILON (0.03125)
+
+#define HULLCHECKSTATE_EMPTY 0
+#define HULLCHECKSTATE_SOLID 1
+#define HULLCHECKSTATE_DONE 2
+
+static int Mod_Q1BSP_RecursiveHullCheck(RecursiveHullCheckTraceInfo_t *t, int num, double p1f, double p2f, double p1[3], double p2[3])
+{
+ // status variables, these don't need to be saved on the stack when
+ // recursing... but are because this should be thread-safe
+ // (note: tracing against a bbox is not thread-safe, yet)
+ int ret;
+ mplane_t *plane;
+ double t1, t2;
+
+ // variables that need to be stored on the stack when recursing
+ dclipnode_t *node;
+ int side;
+ double midf, mid[3];
+
+ // LordHavoc: a goto! everyone flee in terror... :)
+loc0:
+ // check for empty
+ if (num < 0)
{
- if (*in)
+ num = Mod_Q1BSP_SuperContentsFromNativeContents(NULL, num);
+ if (!t->trace->startfound)
{
- *out++ = *in++;
- continue;
+ t->trace->startfound = true;
+ t->trace->startsupercontents |= num;
+ }
+ if (num & SUPERCONTENTS_LIQUIDSMASK)
+ t->trace->inwater = true;
+ if (num == 0)
+ t->trace->inopen = true;
+ if (num & t->trace->hitsupercontentsmask)
+ {
+ // if the first leaf is solid, set startsolid
+ if (t->trace->allsolid)
+ t->trace->startsolid = true;
+#if COLLISIONPARANOID >= 3
+ Con_Print("S");
+#endif
+ return HULLCHECKSTATE_SOLID;
+ }
+ else
+ {
+ t->trace->allsolid = false;
+#if COLLISIONPARANOID >= 3
+ Con_Print("E");
+#endif
+ return HULLCHECKSTATE_EMPTY;
}
+ }
+
+ // find the point distances
+ node = t->hull->clipnodes + num;
+
+ plane = t->hull->planes + node->planenum;
+ if (plane->type < 3)
+ {
+ t1 = p1[plane->type] - plane->dist;
+ t2 = p2[plane->type] - plane->dist;
+ }
+ else
+ {
+ t1 = DotProduct (plane->normal, p1) - plane->dist;
+ t2 = DotProduct (plane->normal, p2) - plane->dist;
+ }
- c = in[1];
- in += 2;
- while (c)
+ if (t1 < 0)
+ {
+ if (t2 < 0)
+ {
+#if COLLISIONPARANOID >= 3
+ Con_Print("<");
+#endif
+ num = node->children[1];
+ goto loc0;
+ }
+ side = 1;
+ }
+ else
+ {
+ if (t2 >= 0)
{
- *out++ = 0;
- c--;
+#if COLLISIONPARANOID >= 3
+ Con_Print(">");
+#endif
+ num = node->children[0];
+ goto loc0;
}
- } while (out - decompressed < row);
+ side = 0;
+ }
- return decompressed;
-}
+ // the line intersects, find intersection point
+ // LordHavoc: this uses the original trace for maximum accuracy
+#if COLLISIONPARANOID >= 3
+ Con_Print("M");
+#endif
+ if (plane->type < 3)
+ {
+ t1 = t->start[plane->type] - plane->dist;
+ t2 = t->end[plane->type] - plane->dist;
+ }
+ else
+ {
+ t1 = DotProduct (plane->normal, t->start) - plane->dist;
+ t2 = DotProduct (plane->normal, t->end) - plane->dist;
+ }
-static qbyte *Mod_Q1BSP_LeafPVS(model_t *model, mleaf_t *leaf)
-{
- if (r_novis.integer || leaf == model->brushq1.leafs || leaf->compressed_vis == NULL)
- return mod_q1bsp_novis;
- return Mod_Q1BSP_DecompressVis(model, leaf->compressed_vis);
-}
+ midf = t1 / (t1 - t2);
+ midf = bound(p1f, midf, p2f);
+ VectorMA(t->start, midf, t->dist, mid);
-static void Mod_Q1BSP_LoadTextures(lump_t *l)
-{
- int i, j, k, num, max, altmax, mtwidth, mtheight, *dofs, incomplete;
- miptex_t *dmiptex;
- texture_t *tx, *tx2, *anims[10], *altanims[10];
- dmiptexlump_t *m;
- qbyte *data, *mtdata;
- char name[256];
+ // recurse both sides, front side first
+ ret = Mod_Q1BSP_RecursiveHullCheck(t, node->children[side], p1f, midf, p1, mid);
+ // if this side is not empty, return what it is (solid or done)
+ if (ret != HULLCHECKSTATE_EMPTY)
+ return ret;
- loadmodel->brushq1.textures = NULL;
+ ret = Mod_Q1BSP_RecursiveHullCheck(t, node->children[side ^ 1], midf, p2f, mid, p2);
+ // if other side is not solid, return what it is (empty or done)
+ if (ret != HULLCHECKSTATE_SOLID)
+ return ret;
- if (!l->filelen)
- return;
+ // front is air and back is solid, this is the impact point...
+ if (side)
+ {
+ t->trace->plane.dist = -plane->dist;
+ VectorNegate (plane->normal, t->trace->plane.normal);
+ }
+ else
+ {
+ t->trace->plane.dist = plane->dist;
+ VectorCopy (plane->normal, t->trace->plane.normal);
+ }
- m = (dmiptexlump_t *)(mod_base + l->fileofs);
+ // calculate the true fraction
+ t1 = DotProduct(t->trace->plane.normal, t->start) - t->trace->plane.dist;
+ t2 = DotProduct(t->trace->plane.normal, t->end) - t->trace->plane.dist;
+ midf = t1 / (t1 - t2);
+ t->trace->realfraction = bound(0, midf, 1);
- m->nummiptex = LittleLong (m->nummiptex);
+ // calculate the return fraction which is nudged off the surface a bit
+ midf = (t1 - DIST_EPSILON) / (t1 - t2);
+ t->trace->fraction = bound(0, midf, 1);
- // add two slots for notexture walls and notexture liquids
- loadmodel->brushq1.numtextures = m->nummiptex + 2;
- loadmodel->brushq1.textures = Mem_Alloc(loadmodel->mempool, loadmodel->brushq1.numtextures * sizeof(texture_t));
+#if COLLISIONPARANOID >= 3
+ Con_Print("D");
+#endif
+ return HULLCHECKSTATE_DONE;
+}
- // fill out all slots with notexture
- for (i = 0, tx = loadmodel->brushq1.textures;i < loadmodel->brushq1.numtextures;i++, tx++)
+#if COLLISIONPARANOID < 2
+static int Mod_Q1BSP_RecursiveHullCheckPoint(RecursiveHullCheckTraceInfo_t *t, int num)
+{
+ while (num >= 0)
+ num = t->hull->clipnodes[num].children[(t->hull->planes[t->hull->clipnodes[num].planenum].type < 3 ? t->start[t->hull->planes[t->hull->clipnodes[num].planenum].type] : DotProduct(t->hull->planes[t->hull->clipnodes[num].planenum].normal, t->start)) < t->hull->planes[t->hull->clipnodes[num].planenum].dist];
+ num = Mod_Q1BSP_SuperContentsFromNativeContents(NULL, num);
+ t->trace->startsupercontents |= num;
+ if (num & SUPERCONTENTS_LIQUIDSMASK)
+ t->trace->inwater = true;
+ if (num == 0)
+ t->trace->inopen = true;
+ if (num & t->trace->hitsupercontentsmask)
{
- tx->number = i;
- strcpy(tx->name, "NO TEXTURE FOUND");
- tx->width = 16;
- tx->height = 16;
- tx->skin.base = r_notexture;
- tx->shader = &Cshader_wall_lightmap;
- tx->flags = SURF_SOLIDCLIP;
- if (i == loadmodel->brushq1.numtextures - 1)
+ t->trace->allsolid = t->trace->startsolid = true;
+ return HULLCHECKSTATE_SOLID;
+ }
+ else
+ {
+ t->trace->allsolid = t->trace->startsolid = false;
+ return HULLCHECKSTATE_EMPTY;
+ }
+}
+#endif
+
+static void Mod_Q1BSP_TraceBox(struct model_s *model, int frame, trace_t *trace, const vec3_t boxstartmins, const vec3_t boxstartmaxs, const vec3_t boxendmins, const vec3_t boxendmaxs, int hitsupercontentsmask)
+{
+ // this function currently only supports same size start and end
+ double boxsize[3];
+ RecursiveHullCheckTraceInfo_t rhc;
+
+ memset(&rhc, 0, sizeof(rhc));
+ memset(trace, 0, sizeof(trace_t));
+ rhc.trace = trace;
+ rhc.trace->hitsupercontentsmask = hitsupercontentsmask;
+ rhc.trace->fraction = 1;
+ rhc.trace->realfraction = 1;
+ rhc.trace->allsolid = true;
+ VectorSubtract(boxstartmaxs, boxstartmins, boxsize);
+ if (boxsize[0] < 3)
+ rhc.hull = &model->brushq1.hulls[0]; // 0x0x0
+ else if (model->brush.ishlbsp)
+ {
+ // LordHavoc: this has to have a minor tolerance (the .1) because of
+ // minor float precision errors from the box being transformed around
+ if (boxsize[0] < 32.1)
{
- tx->flags |= SURF_DRAWTURB | SURF_LIGHTBOTHSIDES;
- tx->shader = &Cshader_water;
+ if (boxsize[2] < 54) // pick the nearest of 36 or 72
+ rhc.hull = &model->brushq1.hulls[3]; // 32x32x36
+ else
+ rhc.hull = &model->brushq1.hulls[1]; // 32x32x72
}
- tx->currentframe = tx;
+ else
+ rhc.hull = &model->brushq1.hulls[2]; // 64x64x64
+ }
+ else
+ {
+ // LordHavoc: this has to have a minor tolerance (the .1) because of
+ // minor float precision errors from the box being transformed around
+ if (boxsize[0] < 32.1)
+ rhc.hull = &model->brushq1.hulls[1]; // 32x32x56
+ else
+ rhc.hull = &model->brushq1.hulls[2]; // 64x64x88
}
+ VectorSubtract(boxstartmins, rhc.hull->clip_mins, rhc.start);
+ VectorSubtract(boxendmins, rhc.hull->clip_mins, rhc.end);
+ VectorSubtract(rhc.end, rhc.start, rhc.dist);
+#if COLLISIONPARANOID >= 2
+ Con_Printf("t(%f %f %f,%f %f %f,%i %f %f %f)", rhc.start[0], rhc.start[1], rhc.start[2], rhc.end[0], rhc.end[1], rhc.end[2], rhc.hull - model->brushq1.hulls, rhc.hull->clip_mins[0], rhc.hull->clip_mins[1], rhc.hull->clip_mins[2]);
+ Mod_Q1BSP_RecursiveHullCheck(&rhc, rhc.hull->firstclipnode, 0, 1, rhc.start, rhc.end);
+ Con_Print("\n");
+#else
+ if (DotProduct(rhc.dist, rhc.dist))
+ Mod_Q1BSP_RecursiveHullCheck(&rhc, rhc.hull->firstclipnode, 0, 1, rhc.start, rhc.end);
+ else
+ Mod_Q1BSP_RecursiveHullCheckPoint(&rhc, rhc.hull->firstclipnode);
+#endif
+}
- // just to work around bounds checking when debugging with it (array index out of bounds error thing)
- dofs = m->dataofs;
- // LordHavoc: mostly rewritten map texture loader
- for (i = 0;i < m->nummiptex;i++)
+void Collision_ClipTrace_Box(trace_t *trace, const vec3_t cmins, const vec3_t cmaxs, const vec3_t start, const vec3_t mins, const vec3_t maxs, const vec3_t end, int hitsupercontentsmask, int boxsupercontents)
+{
+#if 1
+ colbrushf_t cbox;
+ colplanef_t cbox_planes[6];
+ cbox.supercontents = boxsupercontents;
+ cbox.numplanes = 6;
+ cbox.numpoints = 0;
+ cbox.numtriangles = 0;
+ cbox.planes = cbox_planes;
+ cbox.points = NULL;
+ cbox.elements = NULL;
+ cbox.markframe = 0;
+ cbox.mins[0] = 0;
+ cbox.mins[1] = 0;
+ cbox.mins[2] = 0;
+ cbox.maxs[0] = 0;
+ cbox.maxs[1] = 0;
+ cbox.maxs[2] = 0;
+ cbox_planes[0].normal[0] = 1;cbox_planes[0].normal[1] = 0;cbox_planes[0].normal[2] = 0;cbox_planes[0].dist = cmaxs[0] - mins[0];
+ cbox_planes[1].normal[0] = -1;cbox_planes[1].normal[1] = 0;cbox_planes[1].normal[2] = 0;cbox_planes[1].dist = maxs[0] - cmins[0];
+ cbox_planes[2].normal[0] = 0;cbox_planes[2].normal[1] = 1;cbox_planes[2].normal[2] = 0;cbox_planes[2].dist = cmaxs[1] - mins[1];
+ cbox_planes[3].normal[0] = 0;cbox_planes[3].normal[1] = -1;cbox_planes[3].normal[2] = 0;cbox_planes[3].dist = maxs[1] - cmins[1];
+ cbox_planes[4].normal[0] = 0;cbox_planes[4].normal[1] = 0;cbox_planes[4].normal[2] = 1;cbox_planes[4].dist = cmaxs[2] - mins[2];
+ cbox_planes[5].normal[0] = 0;cbox_planes[5].normal[1] = 0;cbox_planes[5].normal[2] = -1;cbox_planes[5].dist = maxs[2] - cmins[2];
+ memset(trace, 0, sizeof(trace_t));
+ trace->hitsupercontentsmask = hitsupercontentsmask;
+ trace->fraction = 1;
+ trace->realfraction = 1;
+ Collision_TraceLineBrushFloat(trace, start, end, &cbox, &cbox);
+#else
+ RecursiveHullCheckTraceInfo_t rhc;
+ static hull_t box_hull;
+ static dclipnode_t box_clipnodes[6];
+ static mplane_t box_planes[6];
+ // fill in a default trace
+ memset(&rhc, 0, sizeof(rhc));
+ memset(trace, 0, sizeof(trace_t));
+ //To keep everything totally uniform, bounding boxes are turned into small
+ //BSP trees instead of being compared directly.
+ // create a temp hull from bounding box sizes
+ box_planes[0].dist = cmaxs[0] - mins[0];
+ box_planes[1].dist = cmins[0] - maxs[0];
+ box_planes[2].dist = cmaxs[1] - mins[1];
+ box_planes[3].dist = cmins[1] - maxs[1];
+ box_planes[4].dist = cmaxs[2] - mins[2];
+ box_planes[5].dist = cmins[2] - maxs[2];
+#if COLLISIONPARANOID >= 3
+ Con_Printf("box_planes %f:%f %f:%f %f:%f\ncbox %f %f %f:%f %f %f\nbox %f %f %f:%f %f %f\n", box_planes[0].dist, box_planes[1].dist, box_planes[2].dist, box_planes[3].dist, box_planes[4].dist, box_planes[5].dist, cmins[0], cmins[1], cmins[2], cmaxs[0], cmaxs[1], cmaxs[2], mins[0], mins[1], mins[2], maxs[0], maxs[1], maxs[2]);
+#endif
+
+ if (box_hull.clipnodes == NULL)
{
- dofs[i] = LittleLong(dofs[i]);
- if (dofs[i] == -1 || r_nosurftextures.integer)
- continue;
- dmiptex = (miptex_t *)((qbyte *)m + dofs[i]);
+ int i, side;
- // make sure name is no more than 15 characters
- for (j = 0;dmiptex->name[j] && j < 15;j++)
- name[j] = dmiptex->name[j];
- name[j] = 0;
+ //Set up the planes and clipnodes so that the six floats of a bounding box
+ //can just be stored out and get a proper hull_t structure.
- mtwidth = LittleLong(dmiptex->width);
- mtheight = LittleLong(dmiptex->height);
- mtdata = NULL;
- j = LittleLong(dmiptex->offsets[0]);
- if (j)
- {
- // texture included
- if (j < 40 || j + mtwidth * mtheight > l->filelen)
- {
- Con_Printf("Texture \"%s\" in \"%s\"is corrupt or incomplete\n", dmiptex->name, loadmodel->name);
- continue;
- }
- mtdata = (qbyte *)dmiptex + j;
- }
+ box_hull.clipnodes = box_clipnodes;
+ box_hull.planes = box_planes;
+ box_hull.firstclipnode = 0;
+ box_hull.lastclipnode = 5;
- if ((mtwidth & 15) || (mtheight & 15))
- Con_Printf("warning: texture \"%s\" in \"%s\" is not 16 aligned", dmiptex->name, loadmodel->name);
+ for (i = 0;i < 6;i++)
+ {
+ box_clipnodes[i].planenum = i;
- // LordHavoc: force all names to lowercase
- for (j = 0;name[j];j++)
- if (name[j] >= 'A' && name[j] <= 'Z')
- name[j] += 'a' - 'A';
+ side = i&1;
- tx = loadmodel->brushq1.textures + i;
- strcpy(tx->name, name);
- tx->width = mtwidth;
- tx->height = mtheight;
+ box_clipnodes[i].children[side] = CONTENTS_EMPTY;
+ if (i != 5)
+ box_clipnodes[i].children[side^1] = i + 1;
+ else
+ box_clipnodes[i].children[side^1] = CONTENTS_SOLID;
- if (!tx->name[0])
- {
- sprintf(tx->name, "unnamed%i", i);
- Con_Printf("warning: unnamed texture in %s, renaming to %s\n", loadmodel->name, tx->name);
+ box_planes[i].type = i>>1;
+ box_planes[i].normal[i>>1] = 1;
+ }
+ }
+
+ // trace a line through the generated clipping hull
+ //rhc.boxsupercontents = boxsupercontents;
+ rhc.hull = &box_hull;
+ rhc.trace = trace;
+ rhc.trace->hitsupercontentsmask = hitsupercontentsmask;
+ rhc.trace->fraction = 1;
+ rhc.trace->realfraction = 1;
+ rhc.trace->allsolid = true;
+ VectorCopy(start, rhc.start);
+ VectorCopy(end, rhc.end);
+ VectorSubtract(rhc.end, rhc.start, rhc.dist);
+ Mod_Q1BSP_RecursiveHullCheck(&rhc, rhc.hull->firstclipnode, 0, 1, rhc.start, rhc.end);
+ //VectorMA(rhc.start, rhc.trace->fraction, rhc.dist, rhc.trace->endpos);
+ if (rhc.trace->startsupercontents)
+ rhc.trace->startsupercontents = boxsupercontents;
+#endif
+}
+
+static int Mod_Q1BSP_LightPoint_RecursiveBSPNode(model_t *model, vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal, const mnode_t *node, float x, float y, float startz, float endz)
+{
+ int side, distz = endz - startz;
+ float front, back;
+ float mid;
+
+loc0:
+ if (!node->plane)
+ return false; // didn't hit anything
+
+ switch (node->plane->type)
+ {
+ case PLANE_X:
+ node = node->children[x < node->plane->dist];
+ goto loc0;
+ case PLANE_Y:
+ node = node->children[y < node->plane->dist];
+ goto loc0;
+ case PLANE_Z:
+ side = startz < node->plane->dist;
+ if ((endz < node->plane->dist) == side)
+ {
+ node = node->children[side];
+ goto loc0;
+ }
+ // found an intersection
+ mid = node->plane->dist;
+ break;
+ default:
+ back = front = x * node->plane->normal[0] + y * node->plane->normal[1];
+ front += startz * node->plane->normal[2];
+ back += endz * node->plane->normal[2];
+ side = front < node->plane->dist;
+ if ((back < node->plane->dist) == side)
+ {
+ node = node->children[side];
+ goto loc0;
+ }
+ // found an intersection
+ mid = startz + distz * (front - node->plane->dist) / (front - back);
+ break;
+ }
+
+ // go down front side
+ if (node->children[side]->plane && Mod_Q1BSP_LightPoint_RecursiveBSPNode(model, ambientcolor, diffusecolor, diffusenormal, node->children[side], x, y, startz, mid))
+ return true; // hit something
+ else
+ {
+ // check for impact on this node
+ if (node->numsurfaces)
+ {
+ int i, ds, dt;
+ msurface_t *surface;
+
+ surface = model->data_surfaces + node->firstsurface;
+ for (i = 0;i < node->numsurfaces;i++, surface++)
+ {
+ if (!(surface->texture->basematerialflags & MATERIALFLAG_WALL) || !surface->lightmapinfo->samples)
+ continue; // no lightmaps
+
+ ds = (int) (x * surface->lightmapinfo->texinfo->vecs[0][0] + y * surface->lightmapinfo->texinfo->vecs[0][1] + mid * surface->lightmapinfo->texinfo->vecs[0][2] + surface->lightmapinfo->texinfo->vecs[0][3]) - surface->lightmapinfo->texturemins[0];
+ dt = (int) (x * surface->lightmapinfo->texinfo->vecs[1][0] + y * surface->lightmapinfo->texinfo->vecs[1][1] + mid * surface->lightmapinfo->texinfo->vecs[1][2] + surface->lightmapinfo->texinfo->vecs[1][3]) - surface->lightmapinfo->texturemins[1];
+
+ if (ds >= 0 && ds < surface->lightmapinfo->extents[0] && dt >= 0 && dt < surface->lightmapinfo->extents[1])
+ {
+ qbyte *lightmap;
+ int lmwidth, lmheight, maps, line3, size3, dsfrac = ds & 15, dtfrac = dt & 15, scale = 0, r00 = 0, g00 = 0, b00 = 0, r01 = 0, g01 = 0, b01 = 0, r10 = 0, g10 = 0, b10 = 0, r11 = 0, g11 = 0, b11 = 0;
+ lmwidth = ((surface->lightmapinfo->extents[0]>>4)+1);
+ lmheight = ((surface->lightmapinfo->extents[1]>>4)+1);
+ line3 = lmwidth * 3; // LordHavoc: *3 for colored lighting
+ size3 = lmwidth * lmheight * 3; // LordHavoc: *3 for colored lighting
+
+ lightmap = surface->lightmapinfo->samples + ((dt>>4) * lmwidth + (ds>>4))*3; // LordHavoc: *3 for colored lighting
+
+ for (maps = 0;maps < MAXLIGHTMAPS && surface->lightmapinfo->styles[maps] != 255;maps++)
+ {
+ scale = d_lightstylevalue[surface->lightmapinfo->styles[maps]];
+ r00 += lightmap[ 0] * scale;g00 += lightmap[ 1] * scale;b00 += lightmap[ 2] * scale;
+ r01 += lightmap[ 3] * scale;g01 += lightmap[ 4] * scale;b01 += lightmap[ 5] * scale;
+ r10 += lightmap[line3+0] * scale;g10 += lightmap[line3+1] * scale;b10 += lightmap[line3+2] * scale;
+ r11 += lightmap[line3+3] * scale;g11 += lightmap[line3+4] * scale;b11 += lightmap[line3+5] * scale;
+ lightmap += size3;
+ }
+
+/*
+LordHavoc: here's the readable version of the interpolation
+code, not quite as easy for the compiler to optimize...
+
+dsfrac is the X position in the lightmap pixel, * 16
+dtfrac is the Y position in the lightmap pixel, * 16
+r00 is top left corner, r01 is top right corner
+r10 is bottom left corner, r11 is bottom right corner
+g and b are the same layout.
+r0 and r1 are the top and bottom intermediate results
+
+first we interpolate the top two points, to get the top
+edge sample
+
+ r0 = (((r01-r00) * dsfrac) >> 4) + r00;
+ g0 = (((g01-g00) * dsfrac) >> 4) + g00;
+ b0 = (((b01-b00) * dsfrac) >> 4) + b00;
+
+then we interpolate the bottom two points, to get the
+bottom edge sample
+
+ r1 = (((r11-r10) * dsfrac) >> 4) + r10;
+ g1 = (((g11-g10) * dsfrac) >> 4) + g10;
+ b1 = (((b11-b10) * dsfrac) >> 4) + b10;
+
+then we interpolate the top and bottom samples to get the
+middle sample (the one which was requested)
+
+ r = (((r1-r0) * dtfrac) >> 4) + r0;
+ g = (((g1-g0) * dtfrac) >> 4) + g0;
+ b = (((b1-b0) * dtfrac) >> 4) + b0;
+*/
+
+ ambientcolor[0] += (float) ((((((((r11-r10) * dsfrac) >> 4) + r10)-((((r01-r00) * dsfrac) >> 4) + r00)) * dtfrac) >> 4) + ((((r01-r00) * dsfrac) >> 4) + r00)) * (1.0f / 32768.0f);
+ ambientcolor[1] += (float) ((((((((g11-g10) * dsfrac) >> 4) + g10)-((((g01-g00) * dsfrac) >> 4) + g00)) * dtfrac) >> 4) + ((((g01-g00) * dsfrac) >> 4) + g00)) * (1.0f / 32768.0f);
+ ambientcolor[2] += (float) ((((((((b11-b10) * dsfrac) >> 4) + b10)-((((b01-b00) * dsfrac) >> 4) + b00)) * dtfrac) >> 4) + ((((b01-b00) * dsfrac) >> 4) + b00)) * (1.0f / 32768.0f);
+ return true; // success
+ }
+ }
+ }
+
+ // go down back side
+ node = node->children[side ^ 1];
+ startz = mid;
+ distz = endz - startz;
+ goto loc0;
+ }
+}
+
+void Mod_Q1BSP_LightPoint(model_t *model, const vec3_t p, vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal)
+{
+ Mod_Q1BSP_LightPoint_RecursiveBSPNode(model, ambientcolor, diffusecolor, diffusenormal, model->brush.data_nodes + model->brushq1.hulls[0].firstclipnode, p[0], p[1], p[2], p[2] - 65536);
+}
+
+static void Mod_Q1BSP_DecompressVis(const qbyte *in, const qbyte *inend, qbyte *out, qbyte *outend)
+{
+ int c;
+ qbyte *outstart = out;
+ while (out < outend)
+ {
+ if (in == inend)
+ {
+ Con_Printf("Mod_Q1BSP_DecompressVis: input underrun on model \"%s\" (decompressed %i of %i output bytes)\n", loadmodel->name, out - outstart, outend - outstart);
+ return;
+ }
+ c = *in++;
+ if (c)
+ *out++ = c;
+ else
+ {
+ if (in == inend)
+ {
+ Con_Printf("Mod_Q1BSP_DecompressVis: input underrun (during zero-run) on model \"%s\" (decompressed %i of %i output bytes)\n", loadmodel->name, out - outstart, outend - outstart);
+ return;
+ }
+ for (c = *in++;c > 0;c--)
+ {
+ if (out == outend)
+ {
+ Con_Printf("Mod_Q1BSP_DecompressVis: output overrun on model \"%s\" (decompressed %i of %i output bytes)\n", loadmodel->name, out - outstart, outend - outstart);
+ return;
+ }
+ *out++ = 0;
+ }
+ }
+ }
+}
+
+/*
+=============
+R_Q1BSP_LoadSplitSky
+
+A sky texture is 256*128, with the right side being a masked overlay
+==============
+*/
+void R_Q1BSP_LoadSplitSky (qbyte *src, int width, int height, int bytesperpixel)
+{
+ int i, j;
+ unsigned solidpixels[128*128], alphapixels[128*128];
+
+ // if sky isn't the right size, just use it as a solid layer
+ if (width != 256 || height != 128)
+ {
+ loadmodel->brush.solidskytexture = R_LoadTexture2D(loadmodel->texturepool, "sky_solidtexture", width, height, src, bytesperpixel == 4 ? TEXTYPE_RGBA : TEXTYPE_PALETTE, TEXF_PRECACHE, bytesperpixel == 1 ? palette_complete : NULL);
+ loadmodel->brush.alphaskytexture = NULL;;
+ return;
+ }
+
+ if (bytesperpixel == 4)
+ {
+ for (i = 0;i < 128;i++)
+ {
+ for (j = 0;j < 128;j++)
+ {
+ solidpixels[(i*128) + j] = ((unsigned *)src)[i*256+j+128];
+ alphapixels[(i*128) + j] = ((unsigned *)src)[i*256+j];
+ }
+ }
+ }
+ else
+ {
+ // make an average value for the back to avoid
+ // a fringe on the top level
+ int p, r, g, b;
+ union
+ {
+ unsigned int i;
+ unsigned char b[4];
+ }
+ rgba;
+ r = g = b = 0;
+ for (i = 0;i < 128;i++)
+ {
+ for (j = 0;j < 128;j++)
+ {
+ rgba.i = palette_complete[src[i*256 + j + 128]];
+ r += rgba.b[0];
+ g += rgba.b[1];
+ b += rgba.b[2];
+ }
+ }
+ rgba.b[0] = r/(128*128);
+ rgba.b[1] = g/(128*128);
+ rgba.b[2] = b/(128*128);
+ rgba.b[3] = 0;
+ for (i = 0;i < 128;i++)
+ {
+ for (j = 0;j < 128;j++)
+ {
+ solidpixels[(i*128) + j] = palette_complete[src[i*256 + j + 128]];
+ alphapixels[(i*128) + j] = (p = src[i*256 + j]) ? palette_complete[p] : rgba.i;
+ }
+ }
+ }
+
+ loadmodel->brush.solidskytexture = R_LoadTexture2D(loadmodel->texturepool, "sky_solidtexture", 128, 128, (qbyte *) solidpixels, TEXTYPE_RGBA, TEXF_PRECACHE, NULL);
+ loadmodel->brush.alphaskytexture = R_LoadTexture2D(loadmodel->texturepool, "sky_alphatexture", 128, 128, (qbyte *) alphapixels, TEXTYPE_RGBA, TEXF_ALPHA | TEXF_PRECACHE, NULL);
+}
+
+static void Mod_Q1BSP_LoadTextures(lump_t *l)
+{
+ int i, j, k, num, max, altmax, mtwidth, mtheight, *dofs, incomplete;
+ miptex_t *dmiptex;
+ texture_t *tx, *tx2, *anims[10], *altanims[10];
+ dmiptexlump_t *m;
+ qbyte *data, *mtdata;
+ char name[256];
+
+ loadmodel->data_textures = NULL;
+
+ // add two slots for notexture walls and notexture liquids
+ if (l->filelen)
+ {
+ m = (dmiptexlump_t *)(mod_base + l->fileofs);
+ m->nummiptex = LittleLong (m->nummiptex);
+ loadmodel->num_textures = m->nummiptex + 2;
+ }
+ else
+ {
+ m = NULL;
+ loadmodel->num_textures = 2;
+ }
+
+ loadmodel->data_textures = Mem_Alloc(loadmodel->mempool, loadmodel->num_textures * sizeof(texture_t));
+
+ // fill out all slots with notexture
+ for (i = 0, tx = loadmodel->data_textures;i < loadmodel->num_textures;i++, tx++)
+ {
+ strcpy(tx->name, "NO TEXTURE FOUND");
+ tx->width = 16;
+ tx->height = 16;
+ tx->skin.base = r_texture_notexture;
+ tx->basematerialflags = 0;
+ if (i == loadmodel->num_textures - 1)
+ {
+ tx->basematerialflags |= MATERIALFLAG_WATER | MATERIALFLAG_LIGHTBOTHSIDES;
+ tx->supercontents = SUPERCONTENTS_WATER;
+ }
+ else
+ {
+ tx->basematerialflags |= MATERIALFLAG_WALL;
+ tx->supercontents = SUPERCONTENTS_SOLID;
+ }
+ tx->currentframe = tx;
+ }
+
+ if (!m)
+ return;
+
+ // just to work around bounds checking when debugging with it (array index out of bounds error thing)
+ dofs = m->dataofs;
+ // LordHavoc: mostly rewritten map texture loader
+ for (i = 0;i < m->nummiptex;i++)
+ {
+ dofs[i] = LittleLong(dofs[i]);
+ if (dofs[i] == -1 || r_nosurftextures.integer)
+ continue;
+ dmiptex = (miptex_t *)((qbyte *)m + dofs[i]);
+
+ // make sure name is no more than 15 characters
+ for (j = 0;dmiptex->name[j] && j < 15;j++)
+ name[j] = dmiptex->name[j];
+ name[j] = 0;
+
+ mtwidth = LittleLong(dmiptex->width);
+ mtheight = LittleLong(dmiptex->height);
+ mtdata = NULL;
+ j = LittleLong(dmiptex->offsets[0]);
+ if (j)
+ {
+ // texture included
+ if (j < 40 || j + mtwidth * mtheight > l->filelen)
+ {
+ Con_Printf("Texture \"%s\" in \"%s\"is corrupt or incomplete\n", dmiptex->name, loadmodel->name);
+ continue;
+ }
+ mtdata = (qbyte *)dmiptex + j;
+ }
+
+ if ((mtwidth & 15) || (mtheight & 15))
+ Con_Printf("warning: texture \"%s\" in \"%s\" is not 16 aligned\n", dmiptex->name, loadmodel->name);
+
+ // LordHavoc: force all names to lowercase
+ for (j = 0;name[j];j++)
+ if (name[j] >= 'A' && name[j] <= 'Z')
+ name[j] += 'a' - 'A';
+
+ tx = loadmodel->data_textures + i;
+ strcpy(tx->name, name);
+ tx->width = mtwidth;
+ tx->height = mtheight;
+
+ if (!tx->name[0])
+ {
+ sprintf(tx->name, "unnamed%i", i);
+ Con_Printf("warning: unnamed texture in %s, renaming to %s\n", loadmodel->name, tx->name);
}
// LordHavoc: HL sky textures are entirely different than quake
- if (!loadmodel->brushq1.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
+ if (!loadmodel->brush.ishlbsp && !strncmp(tx->name, "sky", 3) && mtwidth == 256 && mtheight == 128)
{
if (loadmodel->isworldmodel)
{
data = loadimagepixels(tx->name, false, 0, 0);
if (data)
{
- if (image_width == 256 && image_height == 128)
- {
- R_InitSky(data, 4);
- Mem_Free(data);
- }
- else
- {
- Mem_Free(data);
- Con_Printf("Invalid replacement texture for sky \"%s\" in %\"%s\", must be 256x128 pixels\n", tx->name, loadmodel->name);
- if (mtdata != NULL)
- R_InitSky(mtdata, 1);
- }
+ R_Q1BSP_LoadSplitSky(data, image_width, image_height, 4);
+ Mem_Free(data);
}
else if (mtdata != NULL)
- R_InitSky(mtdata, 1);
+ R_Q1BSP_LoadSplitSky(mtdata, mtwidth, mtheight, 1);
}
}
else
{
- if (!Mod_LoadSkinFrame(&tx->skin, tx->name, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE, false, true, true))
+ if (!Mod_LoadSkinFrame(&tx->skin, tx->name, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | TEXF_PICMIP, false, tx->name[0] != '*', true))
{
// did not find external texture, load it from the bsp or wad3
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
{
// internal texture overrides wad
qbyte *pixels, *freepixels, *fogpixels;
{
tx->width = image_width;
tx->height = image_height;
- tx->skin.base = tx->skin.merged = R_LoadTexture2D(loadmodel->texturepool, tx->name, image_width, image_height, pixels, TEXTYPE_RGBA, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE, NULL);
+ tx->skin.base = tx->skin.merged = R_LoadTexture2D(loadmodel->texturepool, tx->name, image_width, image_height, pixels, TEXTYPE_RGBA, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | TEXF_PICMIP, NULL);
if (Image_CheckAlpha(pixels, image_width * image_height, true))
{
fogpixels = Mem_Alloc(tempmempool, image_width * image_height * 4);
fogpixels[j + 2] = 255;
fogpixels[j + 3] = pixels[j + 3];
}
- tx->skin.fog = R_LoadTexture2D(loadmodel->texturepool, tx->name, image_width, image_height, pixels, TEXTYPE_RGBA, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE, NULL);
+ tx->skin.fog = R_LoadTexture2D(loadmodel->texturepool, tx->name, image_width, image_height, pixels, TEXTYPE_RGBA, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE | TEXF_PICMIP, NULL);
Mem_Free(fogpixels);
}
}
Mem_Free(freepixels);
}
else if (mtdata) // texture included
- Mod_LoadSkinFrame_Internal(&tx->skin, tx->name, TEXF_MIPMAP | TEXF_PRECACHE, false, true, tx->name[0] != '*' && r_fullbrights.integer, mtdata, tx->width, tx->height);
+ Mod_LoadSkinFrame_Internal(&tx->skin, tx->name, TEXF_MIPMAP | TEXF_PRECACHE | TEXF_PICMIP, false, tx->name[0] != '*', tx->name[0] != '*' && r_fullbrights.integer, mtdata, tx->width, tx->height);
}
}
if (tx->skin.base == NULL)
// no texture found
tx->width = 16;
tx->height = 16;
- tx->skin.base = r_notexture;
+ tx->skin.base = r_texture_notexture;
}
+ tx->basematerialflags = 0;
if (tx->name[0] == '*')
{
// turb does not block movement
- tx->flags &= ~SURF_SOLIDCLIP;
- tx->flags |= SURF_DRAWTURB | SURF_LIGHTBOTHSIDES;
+ tx->basematerialflags |= MATERIALFLAG_WATER | MATERIALFLAG_LIGHTBOTHSIDES;
// LordHavoc: some turbulent textures should be fullbright and solid
if (!strncmp(tx->name,"*lava",5)
|| !strncmp(tx->name,"*teleport",9)
|| !strncmp(tx->name,"*rift",5)) // Scourge of Armagon texture
- tx->flags |= SURF_DRAWFULLBRIGHT | SURF_DRAWNOALPHA;
+ tx->basematerialflags |= MATERIALFLAG_FULLBRIGHT;
else
- tx->flags |= SURF_WATERALPHA;
- tx->shader = &Cshader_water;
+ tx->basematerialflags |= MATERIALFLAG_WATERALPHA;
+ if (!strncmp(tx->name, "*lava", 5))
+ tx->supercontents = SUPERCONTENTS_LAVA;
+ else if (!strncmp(tx->name, "*slime", 6))
+ tx->supercontents = SUPERCONTENTS_SLIME;
+ else
+ tx->supercontents = SUPERCONTENTS_WATER;
}
else if (tx->name[0] == 's' && tx->name[1] == 'k' && tx->name[2] == 'y')
{
- tx->flags |= SURF_DRAWSKY;
- tx->shader = &Cshader_sky;
+ tx->supercontents = SUPERCONTENTS_SKY;
+ tx->basematerialflags |= MATERIALFLAG_SKY;
}
else
{
- tx->flags |= SURF_LIGHTMAP;
- if (!tx->skin.fog)
- tx->flags |= SURF_SHADOWCAST | SURF_SHADOWLIGHT;
- tx->shader = &Cshader_wall_lightmap;
+ tx->supercontents = SUPERCONTENTS_SOLID;
+ tx->basematerialflags |= MATERIALFLAG_WALL;
}
+ if (tx->skin.fog)
+ tx->basematerialflags |= MATERIALFLAG_ALPHA | MATERIALFLAG_TRANSPARENT;
// start out with no animation
tx->currentframe = tx;
// sequence the animations
for (i = 0;i < m->nummiptex;i++)
{
- tx = loadmodel->brushq1.textures + i;
+ tx = loadmodel->data_textures + i;
if (!tx || tx->name[0] != '+' || tx->name[1] == 0 || tx->name[2] == 0)
continue;
if (tx->anim_total[0] || tx->anim_total[1])
for (j = i;j < m->nummiptex;j++)
{
- tx2 = loadmodel->brushq1.textures + j;
+ tx2 = loadmodel->data_textures + j;
if (!tx2 || tx2->name[0] != '+' || strcmp(tx2->name+2, tx->name+2))
continue;
qbyte *in, *out, *data, d;
char litfilename[1024];
loadmodel->brushq1.lightdata = NULL;
- if (loadmodel->brushq1.ishlbsp) // LordHavoc: load the colored lighting data straight
+ if (loadmodel->brush.ishlbsp) // LordHavoc: load the colored lighting data straight
{
loadmodel->brushq1.lightdata = Mem_Alloc(loadmodel->mempool, l->filelen);
- memcpy(loadmodel->brushq1.lightdata, mod_base + l->fileofs, l->filelen);
+ for (i=0; i<l->filelen; i++)
+ loadmodel->brushq1.lightdata[i] = mod_base[l->fileofs+i] >>= 1;
}
else // LordHavoc: bsp version 29 (normal white lighting)
{
// LordHavoc: hope is not lost yet, check for a .lit file to load
- strcpy(litfilename, loadmodel->name);
- FS_StripExtension(litfilename, litfilename);
- strcat(litfilename, ".lit");
- data = (qbyte*) FS_LoadFile(litfilename, false);
+ strlcpy (litfilename, loadmodel->name, sizeof (litfilename));
+ FS_StripExtension (litfilename, litfilename, sizeof (litfilename));
+ strlcat (litfilename, ".lit", sizeof (litfilename));
+ data = (qbyte*) FS_LoadFile(litfilename, tempmempool, false);
if (data)
{
- if (fs_filesize > 8 && data[0] == 'Q' && data[1] == 'L' && data[2] == 'I' && data[3] == 'T')
+ if (fs_filesize == (fs_offset_t)(8 + l->filelen * 3) && data[0] == 'Q' && data[1] == 'L' && data[2] == 'I' && data[3] == 'T')
{
i = LittleLong(((int *)data)[1]);
if (i == 1)
else
{
if (fs_filesize == 8)
- Con_Printf("Empty .lit file, ignoring\n");
+ Con_Print("Empty .lit file, ignoring\n");
else
- Con_Printf("Corrupt .lit file (old version?), ignoring\n");
+ Con_Printf("Corrupt .lit file (file size %i bytes, should be %i bytes), ignoring\n", fs_filesize, 8 + l->filelen * 3);
Mem_Free(data);
}
}
static void Mod_Q1BSP_LoadLightList(void)
{
int a, n, numlights;
- char lightsfilename[1024], *s, *t, *lightsstring;
+ char tempchar, *s, *t, *lightsstring, lightsfilename[1024];
mlight_t *e;
- strcpy(lightsfilename, loadmodel->name);
- FS_StripExtension(lightsfilename, lightsfilename);
- strcat(lightsfilename, ".lights");
- s = lightsstring = (char *) FS_LoadFile(lightsfilename, false);
+ strlcpy (lightsfilename, loadmodel->name, sizeof (lightsfilename));
+ FS_StripExtension (lightsfilename, lightsfilename, sizeof(lightsfilename));
+ strlcat (lightsfilename, ".lights", sizeof (lightsfilename));
+ s = lightsstring = (char *) FS_LoadFile(lightsfilename, tempmempool, false);
if (s)
{
numlights = 0;
while (*s)
{
- while (*s && *s != '\n')
+ while (*s && *s != '\n' && *s != '\r')
s++;
if (!*s)
{
Mem_Free(lightsstring);
- Host_Error("lights file must end with a newline\n");
+ Con_Printf("lights file must end with a newline\n");
+ return;
}
s++;
numlights++;
while (*s && n < numlights)
{
t = s;
- while (*s && *s != '\n')
+ while (*s && *s != '\n' && *s != '\r')
s++;
if (!*s)
{
- Mem_Free(lightsstring);
- Host_Error("misparsed lights file!\n");
+ Con_Printf("misparsed lights file!\n");
+ break;
}
e = loadmodel->brushq1.lights + n;
+ tempchar = *s;
*s = 0;
a = sscanf(t, "%f %f %f %f %f %f %f %f %f %f %f %f %f %d", &e->origin[0], &e->origin[1], &e->origin[2], &e->falloff, &e->light[0], &e->light[1], &e->light[2], &e->subtract, &e->spotdir[0], &e->spotdir[1], &e->spotdir[2], &e->spotcone, &e->distbias, &e->style);
- *s = '\n';
+ *s = tempchar;
if (a != 14)
{
- Mem_Free(lightsstring);
- Host_Error("invalid lights file, found %d parameters on line %i, should be 14 parameters (origin[0] origin[1] origin[2] falloff light[0] light[1] light[2] subtract spotdir[0] spotdir[1] spotdir[2] spotcone distancebias style)\n", a, n + 1);
+ Con_Printf("invalid lights file, found %d parameters on line %i, should be 14 parameters (origin[0] origin[1] origin[2] falloff light[0] light[1] light[2] subtract spotdir[0] spotdir[1] spotdir[2] spotcone distancebias style)\n", a, n + 1);
+ break;
}
- s++;
+ if (*s == '\r')
+ s++;
+ if (*s == '\n')
+ s++;
n++;
}
if (*s)
- {
- Mem_Free(lightsstring);
- Host_Error("misparsed lights file!\n");
- }
+ Con_Printf("misparsed lights file!\n");
loadmodel->brushq1.numlights = numlights;
Mem_Free(lightsstring);
}
}
-/*
-static int castshadowcount = 0;
-static void Mod_Q1BSP_ProcessLightList(void)
-{
- int j, k, l, *mark, lnum;
- mlight_t *e;
- msurface_t *surf;
- float dist;
- mleaf_t *leaf;
- qbyte *pvs;
- vec3_t temp;
- float *v, radius2;
- for (lnum = 0, e = loadmodel->brushq1.lights;lnum < loadmodel->brushq1.numlights;lnum++, e++)
- {
- e->cullradius2 = DotProduct(e->light, e->light) / (e->falloff * e->falloff * 8192.0f * 8192.0f * 2.0f * 2.0f);// + 4096.0f;
- if (e->cullradius2 > 4096.0f * 4096.0f)
- e->cullradius2 = 4096.0f * 4096.0f;
- e->cullradius = e->lightradius = sqrt(e->cullradius2);
- leaf = Mod_Q1BSP_PointInLeaf(e->origin, loadmodel);
- if (leaf->compressed_vis)
- pvs = Mod_Q1BSP_DecompressVis(leaf->compressed_vis, loadmodel);
- else
- pvs = mod_q1bsp_novis;
- for (j = 0;j < loadmodel->brushq1.numsurfaces;j++)
- loadmodel->brushq1.surfacevisframes[j] = -1;
- for (j = 0, leaf = loadmodel->brushq1.leafs + 1;j < loadmodel->brushq1.numleafs - 1;j++, leaf++)
- {
- if (pvs[j >> 3] & (1 << (j & 7)))
- {
- for (k = 0, mark = leaf->firstmarksurface;k < leaf->nummarksurfaces;k++, mark++)
- {
- surf = loadmodel->brushq1.surfaces + *mark;
- if (surf->number != *mark)
- Con_Printf("%d != %d\n", surf->number, *mark);
- dist = DotProduct(e->origin, surf->plane->normal) - surf->plane->dist;
- if (surf->flags & SURF_PLANEBACK)
- dist = -dist;
- if (dist > 0 && dist < e->cullradius)
- {
- temp[0] = bound(surf->poly_mins[0], e->origin[0], surf->poly_maxs[0]) - e->origin[0];
- temp[1] = bound(surf->poly_mins[1], e->origin[1], surf->poly_maxs[1]) - e->origin[1];
- temp[2] = bound(surf->poly_mins[2], e->origin[2], surf->poly_maxs[2]) - e->origin[2];
- if (DotProduct(temp, temp) < lightradius2)
- loadmodel->brushq1.surfacevisframes[*mark] = -2;
- }
- }
- }
- }
- // build list of light receiving surfaces
- e->numsurfaces = 0;
- for (j = 0;j < loadmodel->brushq1.numsurfaces;j++)
- if (loadmodel->brushq1.surfacevisframes[j] == -2)
- e->numsurfaces++;
- e->surfaces = NULL;
- if (e->numsurfaces > 0)
- {
- e->surfaces = Mem_Alloc(loadmodel->mempool, sizeof(msurface_t *) * e->numsurfaces);
- e->numsurfaces = 0;
- for (j = 0;j < loadmodel->brushq1.numsurfaces;j++)
- if (loadmodel->brushq1.surfacevisframes[j] == -2)
- e->surfaces[e->numsurfaces++] = loadmodel->brushq1.surfaces + j;
- }
- // find bounding box and sphere of lit surfaces
- // (these will be used for creating a shape to clip the light)
- radius2 = 0;
- for (j = 0;j < e->numsurfaces;j++)
- {
- surf = e->surfaces[j];
- if (j == 0)
- {
- VectorCopy(surf->poly_verts, e->mins);
- VectorCopy(surf->poly_verts, e->maxs);
- }
- for (k = 0, v = surf->poly_verts;k < surf->poly_numverts;k++, v += 3)
- {
- if (e->mins[0] > v[0]) e->mins[0] = v[0];if (e->maxs[0] < v[0]) e->maxs[0] = v[0];
- if (e->mins[1] > v[1]) e->mins[1] = v[1];if (e->maxs[1] < v[1]) e->maxs[1] = v[1];
- if (e->mins[2] > v[2]) e->mins[2] = v[2];if (e->maxs[2] < v[2]) e->maxs[2] = v[2];
- VectorSubtract(v, e->origin, temp);
- dist = DotProduct(temp, temp);
- if (radius2 < dist)
- radius2 = dist;
- }
- }
- if (e->cullradius2 > radius2)
- {
- e->cullradius2 = radius2;
- e->cullradius = sqrt(e->cullradius2);
- }
- if (e->mins[0] < e->origin[0] - e->lightradius) e->mins[0] = e->origin[0] - e->lightradius;
- if (e->maxs[0] > e->origin[0] + e->lightradius) e->maxs[0] = e->origin[0] + e->lightradius;
- if (e->mins[1] < e->origin[1] - e->lightradius) e->mins[1] = e->origin[1] - e->lightradius;
- if (e->maxs[1] > e->origin[1] + e->lightradius) e->maxs[1] = e->origin[1] + e->lightradius;
- if (e->mins[2] < e->origin[2] - e->lightradius) e->mins[2] = e->origin[2] - e->lightradius;
- if (e->maxs[2] > e->origin[2] + e->lightradius) e->maxs[2] = e->origin[2] + e->lightradius;
- // clip shadow volumes against eachother to remove unnecessary
- // polygons(and sections of polygons)
- {
- //vec3_t polymins, polymaxs;
- int maxverts = 4;
- float *verts = Mem_Alloc(loadmodel->mempool, maxverts * sizeof(float[3]));
- float f, *v0, *v1, projectdistance;
-
- e->shadowvolume = Mod_ShadowMesh_Begin(loadmodel->mempool, 1024);
-#if 0
- {
- vec3_t outermins, outermaxs, innermins, innermaxs;
- innermins[0] = e->mins[0] - 1;
- innermins[1] = e->mins[1] - 1;
- innermins[2] = e->mins[2] - 1;
- innermaxs[0] = e->maxs[0] + 1;
- innermaxs[1] = e->maxs[1] + 1;
- innermaxs[2] = e->maxs[2] + 1;
- outermins[0] = loadmodel->normalmins[0] - 1;
- outermins[1] = loadmodel->normalmins[1] - 1;
- outermins[2] = loadmodel->normalmins[2] - 1;
- outermaxs[0] = loadmodel->normalmaxs[0] + 1;
- outermaxs[1] = loadmodel->normalmaxs[1] + 1;
- outermaxs[2] = loadmodel->normalmaxs[2] + 1;
- // add bounding box around the whole shadow volume set,
- // facing inward to limit light area, with an outer bounding box
- // facing outward (this is needed by the shadow rendering method)
- // X major
- verts[ 0] = innermaxs[0];verts[ 1] = innermins[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermins[1];verts[ 5] = innermins[2];
- verts[ 6] = innermaxs[0];verts[ 7] = innermaxs[1];verts[ 8] = innermins[2];
- verts[ 9] = innermaxs[0];verts[10] = innermaxs[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermaxs[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermaxs[1];verts[ 5] = outermins[2];
- verts[ 6] = outermaxs[0];verts[ 7] = outermins[1];verts[ 8] = outermins[2];
- verts[ 9] = outermaxs[0];verts[10] = outermins[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // X minor
- verts[ 0] = innermins[0];verts[ 1] = innermaxs[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermins[0];verts[ 4] = innermaxs[1];verts[ 5] = innermins[2];
- verts[ 6] = innermins[0];verts[ 7] = innermins[1];verts[ 8] = innermins[2];
- verts[ 9] = innermins[0];verts[10] = innermins[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermins[0];verts[ 1] = outermins[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermins[0];verts[ 4] = outermins[1];verts[ 5] = outermins[2];
- verts[ 6] = outermins[0];verts[ 7] = outermaxs[1];verts[ 8] = outermins[2];
- verts[ 9] = outermins[0];verts[10] = outermaxs[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Y major
- verts[ 0] = innermaxs[0];verts[ 1] = innermaxs[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermaxs[1];verts[ 5] = innermins[2];
- verts[ 6] = innermins[0];verts[ 7] = innermaxs[1];verts[ 8] = innermins[2];
- verts[ 9] = innermins[0];verts[10] = innermaxs[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermins[0];verts[ 1] = outermaxs[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermins[0];verts[ 4] = outermaxs[1];verts[ 5] = outermins[2];
- verts[ 6] = outermaxs[0];verts[ 7] = outermaxs[1];verts[ 8] = outermins[2];
- verts[ 9] = outermaxs[0];verts[10] = outermaxs[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Y minor
- verts[ 0] = innermins[0];verts[ 1] = innermins[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermins[0];verts[ 4] = innermins[1];verts[ 5] = innermins[2];
- verts[ 6] = innermaxs[0];verts[ 7] = innermins[1];verts[ 8] = innermins[2];
- verts[ 9] = innermaxs[0];verts[10] = innermins[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermins[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermins[1];verts[ 5] = outermins[2];
- verts[ 6] = outermins[0];verts[ 7] = outermins[1];verts[ 8] = outermins[2];
- verts[ 9] = outermins[0];verts[10] = outermins[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Z major
- verts[ 0] = innermaxs[0];verts[ 1] = innermins[1];verts[ 2] = innermaxs[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermaxs[1];verts[ 5] = innermaxs[2];
- verts[ 6] = innermins[0];verts[ 7] = innermaxs[1];verts[ 8] = innermaxs[2];
- verts[ 9] = innermins[0];verts[10] = innermins[1];verts[11] = innermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermaxs[1];verts[ 2] = outermaxs[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermins[1];verts[ 5] = outermaxs[2];
- verts[ 6] = outermins[0];verts[ 7] = outermins[1];verts[ 8] = outermaxs[2];
- verts[ 9] = outermins[0];verts[10] = outermaxs[1];verts[11] = outermaxs[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- // Z minor
- verts[ 0] = innermaxs[0];verts[ 1] = innermaxs[1];verts[ 2] = innermins[2];
- verts[ 3] = innermaxs[0];verts[ 4] = innermins[1];verts[ 5] = innermins[2];
- verts[ 6] = innermins[0];verts[ 7] = innermins[1];verts[ 8] = innermins[2];
- verts[ 9] = innermins[0];verts[10] = innermaxs[1];verts[11] = innermins[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- verts[ 0] = outermaxs[0];verts[ 1] = outermins[1];verts[ 2] = outermins[2];
- verts[ 3] = outermaxs[0];verts[ 4] = outermaxs[1];verts[ 5] = outermins[2];
- verts[ 6] = outermins[0];verts[ 7] = outermaxs[1];verts[ 8] = outermins[2];
- verts[ 9] = outermins[0];verts[10] = outermins[1];verts[11] = outermins[2];
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- }
-#endif
- castshadowcount++;
- for (j = 0;j < e->numsurfaces;j++)
- {
- surf = e->surfaces[j];
- if (surf->flags & SURF_SHADOWCAST)
- surf->castshadow = castshadowcount;
- }
- for (j = 0;j < e->numsurfaces;j++)
- {
- surf = e->surfaces[j];
- if (surf->castshadow != castshadowcount)
- continue;
- f = DotProduct(e->origin, surf->plane->normal) - surf->plane->dist;
- if (surf->flags & SURF_PLANEBACK)
- f = -f;
- projectdistance = e->lightradius;
- if (maxverts < surf->poly_numverts)
- {
- maxverts = surf->poly_numverts;
- if (verts)
- Mem_Free(verts);
- verts = Mem_Alloc(loadmodel->mempool, maxverts * sizeof(float[3]));
- }
- // copy the original polygon, for the front cap of the volume
- for (k = 0, v0 = surf->poly_verts, v1 = verts;k < surf->poly_numverts;k++, v0 += 3, v1 += 3)
- VectorCopy(v0, v1);
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, surf->poly_numverts, verts);
- // project the original polygon, reversed, for the back cap of the volume
- for (k = 0, v0 = surf->poly_verts + (surf->poly_numverts - 1) * 3, v1 = verts;k < surf->poly_numverts;k++, v0 -= 3, v1 += 3)
- {
- VectorSubtract(v0, e->origin, temp);
- VectorNormalize(temp);
- VectorMA(v0, projectdistance, temp, v1);
- }
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, surf->poly_numverts, verts);
- // project the shadow volume sides
- for (l = surf->poly_numverts - 1, k = 0, v0 = surf->poly_verts + (surf->poly_numverts - 1) * 3, v1 = surf->poly_verts;k < surf->poly_numverts;l = k, k++, v0 = v1, v1 += 3)
- {
- if (!surf->neighborsurfaces[l] || surf->neighborsurfaces[l]->castshadow != castshadowcount)
- {
- VectorCopy(v1, &verts[0]);
- VectorCopy(v0, &verts[3]);
- VectorCopy(v0, &verts[6]);
- VectorCopy(v1, &verts[9]);
- VectorSubtract(&verts[6], e->origin, temp);
- VectorNormalize(temp);
- VectorMA(&verts[6], projectdistance, temp, &verts[6]);
- VectorSubtract(&verts[9], e->origin, temp);
- VectorNormalize(temp);
- VectorMA(&verts[9], projectdistance, temp, &verts[9]);
- Mod_ShadowMesh_AddPolygon(loadmodel->mempool, e->shadowvolume, 4, verts);
- }
- }
- }
- // build the triangle mesh
- e->shadowvolume = Mod_ShadowMesh_Finish(loadmodel->mempool, e->shadowvolume);
- {
- shadowmesh_t *mesh;
- l = 0;
- for (mesh = e->shadowvolume;mesh;mesh = mesh->next)
- l += mesh->numtriangles;
- Con_Printf("light %i shadow volume built containing %i triangles\n", lnum, l);
- }
- }
- }
-}
-*/
-
-
static void Mod_Q1BSP_LoadVisibility(lump_t *l)
{
- loadmodel->brushq1.visdata = NULL;
+ loadmodel->brushq1.num_compressedpvs = 0;
+ loadmodel->brushq1.data_compressedpvs = NULL;
if (!l->filelen)
return;
- loadmodel->brushq1.visdata = Mem_Alloc(loadmodel->mempool, l->filelen);
- memcpy(loadmodel->brushq1.visdata, mod_base + l->fileofs, l->filelen);
+ loadmodel->brushq1.num_compressedpvs = l->filelen;
+ loadmodel->brushq1.data_compressedpvs = Mem_Alloc(loadmodel->mempool, l->filelen);
+ memcpy(loadmodel->brushq1.data_compressedpvs, mod_base + l->fileofs, l->filelen);
}
// used only for HalfLife maps
int i, j, k;
if (!data)
return;
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
return; // error
if (com_token[0] != '{')
return; // error
while (1)
{
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
return; // error
if (com_token[0] == '}')
break; // end of worldspawn
strcpy(key, com_token);
while (key[strlen(key)-1] == ' ') // remove trailing spaces
key[strlen(key)-1] = 0;
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
return; // error
strcpy(value, com_token);
if (!strcmp("wad", key)) // for HalfLife maps
{
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
{
j = 0;
for (i = 0;i < 4096;i++)
return;
loadmodel->brush.entities = Mem_Alloc(loadmodel->mempool, l->filelen);
memcpy(loadmodel->brush.entities, mod_base + l->fileofs, l->filelen);
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
Mod_Q1BSP_ParseWadsFromEntityLump(loadmodel->brush.entities);
}
out = Mem_Alloc(loadmodel->mempool, count*sizeof(*out));
loadmodel->brushq1.submodels = out;
- loadmodel->brushq1.numsubmodels = count;
+ loadmodel->brush.numsubmodels = count;
for ( i=0 ; i<count ; i++, in++, out++)
{
out->flags = LittleLong(in->flags);
out->texture = NULL;
- if (loadmodel->brushq1.textures)
+ if (loadmodel->data_textures)
{
- if ((unsigned int) miptex >= (unsigned int) loadmodel->brushq1.numtextures)
- Con_Printf("error in model \"%s\": invalid miptex index %i(of %i)\n", loadmodel->name, miptex, loadmodel->brushq1.numtextures);
+ if ((unsigned int) miptex >= (unsigned int) loadmodel->num_textures)
+ Con_Printf("error in model \"%s\": invalid miptex index %i(of %i)\n", loadmodel->name, miptex, loadmodel->num_textures);
else
- out->texture = loadmodel->brushq1.textures + miptex;
+ out->texture = loadmodel->data_textures + miptex;
}
if (out->flags & TEX_SPECIAL)
{
// if texture chosen is NULL or the shader needs a lightmap,
// force to notexture water shader
- if (out->texture == NULL || out->texture->shader->flags & SHADERFLAGS_NEEDLIGHTMAP)
- out->texture = loadmodel->brushq1.textures + (loadmodel->brushq1.numtextures - 1);
+ if (out->texture == NULL || out->texture->basematerialflags & MATERIALFLAG_WALL)
+ out->texture = loadmodel->data_textures + (loadmodel->num_textures - 1);
}
else
{
// if texture chosen is NULL, force to notexture
if (out->texture == NULL)
- out->texture = loadmodel->brushq1.textures + (loadmodel->brushq1.numtextures - 2);
+ out->texture = loadmodel->data_textures + (loadmodel->num_textures - 2);
}
}
}
{
if (subdivpolytriangles >= MAX_SUBDIVPOLYTRIANGLES)
{
- Con_Printf("SubdividePolygon: ran out of triangles in buffer, please increase your r_subdivide_size\n");
+ Con_Print("SubdividePolygon: ran out of triangles in buffer, please increase your r_subdivide_size\n");
return;
}
//Breaks a polygon up along axial 64 unit
//boundaries so that turbulent and sky warps
//can be done reasonably.
-static void Mod_Q1BSP_GenerateWarpMesh(msurface_t *surf)
+static void Mod_Q1BSP_GenerateWarpMesh(msurface_t *surface)
{
int i, j;
surfvertex_t *v;
subdivpolytriangles = 0;
subdivpolyverts = 0;
- SubdividePolygon(surf->poly_numverts, surf->poly_verts);
+ SubdividePolygon(surface->num_vertices, (surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex));
if (subdivpolytriangles < 1)
Host_Error("Mod_Q1BSP_GenerateWarpMesh: no triangles?\n");
- surf->mesh = mesh = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) + subdivpolytriangles * sizeof(int[3]) + subdivpolyverts * sizeof(surfvertex_t));
- mesh->numverts = subdivpolyverts;
- mesh->numtriangles = subdivpolytriangles;
+ surface->mesh = mesh = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) + subdivpolytriangles * sizeof(int[3]) + subdivpolyverts * sizeof(surfvertex_t));
+ mesh->num_vertices = subdivpolyverts;
+ mesh->num_triangles = subdivpolytriangles;
mesh->vertex = (surfvertex_t *)(mesh + 1);
- mesh->index = (int *)(mesh->vertex + mesh->numverts);
- memset(mesh->vertex, 0, mesh->numverts * sizeof(surfvertex_t));
+ mesh->index = (int *)(mesh->vertex + mesh->num_vertices);
+ memset(mesh->vertex, 0, mesh->num_vertices * sizeof(surfvertex_t));
- for (i = 0;i < mesh->numtriangles;i++)
+ for (i = 0;i < mesh->num_triangles;i++)
for (j = 0;j < 3;j++)
mesh->index[i*3+j] = subdivpolyindex[i][j];
for (i = 0, v = mesh->vertex;i < subdivpolyverts;i++, v++)
{
VectorCopy(subdivpolyvert[i], v->v);
- v->st[0] = DotProduct(v->v, surf->texinfo->vecs[0]);
- v->st[1] = DotProduct(v->v, surf->texinfo->vecs[1]);
+ v->st[0] = DotProduct(v->v, surface->lightmapinfo->texinfo->vecs[0]);
+ v->st[1] = DotProduct(v->v, surface->lightmapinfo->texinfo->vecs[1]);
}
}
#endif
-static surfmesh_t *Mod_Q1BSP_AllocSurfMesh(int numverts, int numtriangles)
+static void Mod_Q1BSP_LoadFaces(lump_t *l)
{
- surfmesh_t *mesh;
- mesh = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) + numtriangles * sizeof(int[6]) + numverts * (3 + 2 + 2 + 2 + 3 + 3 + 3 + 1) * sizeof(float));
- mesh->numverts = numverts;
- mesh->numtriangles = numtriangles;
- mesh->vertex3f = (float *)(mesh + 1);
- mesh->texcoordtexture2f = mesh->vertex3f + mesh->numverts * 3;
- mesh->texcoordlightmap2f = mesh->texcoordtexture2f + mesh->numverts * 2;
- mesh->texcoorddetail2f = mesh->texcoordlightmap2f + mesh->numverts * 2;
- mesh->svector3f = (float *)(mesh->texcoorddetail2f + mesh->numverts * 2);
- mesh->tvector3f = mesh->svector3f + mesh->numverts * 3;
- mesh->normal3f = mesh->tvector3f + mesh->numverts * 3;
- mesh->lightmapoffsets = (int *)(mesh->normal3f + mesh->numverts * 3);
- mesh->element3i = mesh->lightmapoffsets + mesh->numverts;
- mesh->neighbor3i = mesh->element3i + mesh->numtriangles * 3;
- return mesh;
-}
-
-static void Mod_Q1BSP_GenerateSurfacePolygon(msurface_t *surf, int firstedge, int numedges)
-{
- int i, lindex, j;
- float *vec, *vert, mins[3], maxs[3], val, *v;
- mtexinfo_t *tex;
-
- // convert edges back to a normal polygon
- surf->poly_numverts = numedges;
- vert = surf->poly_verts = Mem_Alloc(loadmodel->mempool, sizeof(float[3]) * numedges);
- for (i = 0;i < numedges;i++)
- {
- lindex = loadmodel->brushq1.surfedges[firstedge + i];
- if (lindex > 0)
- vec = loadmodel->brushq1.vertexes[loadmodel->brushq1.edges[lindex].v[0]].position;
- else
- vec = loadmodel->brushq1.vertexes[loadmodel->brushq1.edges[-lindex].v[1]].position;
- VectorCopy(vec, vert);
- vert += 3;
- }
-
- // calculate polygon bounding box and center
- vert = surf->poly_verts;
- VectorCopy(vert, mins);
- VectorCopy(vert, maxs);
- vert += 3;
- for (i = 1;i < surf->poly_numverts;i++, vert += 3)
- {
- if (mins[0] > vert[0]) mins[0] = vert[0];if (maxs[0] < vert[0]) maxs[0] = vert[0];
- if (mins[1] > vert[1]) mins[1] = vert[1];if (maxs[1] < vert[1]) maxs[1] = vert[1];
- if (mins[2] > vert[2]) mins[2] = vert[2];if (maxs[2] < vert[2]) maxs[2] = vert[2];
- }
- VectorCopy(mins, surf->poly_mins);
- VectorCopy(maxs, surf->poly_maxs);
- surf->poly_center[0] = (mins[0] + maxs[0]) * 0.5f;
- surf->poly_center[1] = (mins[1] + maxs[1]) * 0.5f;
- surf->poly_center[2] = (mins[2] + maxs[2]) * 0.5f;
-
- // generate surface extents information
- tex = surf->texinfo;
- mins[0] = maxs[0] = DotProduct(surf->poly_verts, tex->vecs[0]) + tex->vecs[0][3];
- mins[1] = maxs[1] = DotProduct(surf->poly_verts, tex->vecs[1]) + tex->vecs[1][3];
- for (i = 1, v = surf->poly_verts + 3;i < surf->poly_numverts;i++, v += 3)
+ dface_t *in;
+ msurface_t *surface;
+ int i, j, count, surfacenum, planenum, smax, tmax, ssize, tsize, firstedge, numedges, totalverts, totaltris;
+ float texmins[2], texmaxs[2], val;
+
+ in = (void *)(mod_base + l->fileofs);
+ if (l->filelen % sizeof(*in))
+ Host_Error("Mod_Q1BSP_LoadFaces: funny lump size in %s",loadmodel->name);
+ count = l->filelen / sizeof(*in);
+ loadmodel->data_surfaces = Mem_Alloc(loadmodel->mempool, count*sizeof(msurface_t));
+ loadmodel->data_surfaces_lightmapinfo = Mem_Alloc(loadmodel->mempool, count*sizeof(msurface_lightmapinfo_t));
+
+ loadmodel->num_surfaces = count;
+
+ totalverts = 0;
+ totaltris = 0;
+ for (surfacenum = 0, in = (void *)(mod_base + l->fileofs);surfacenum < count;surfacenum++, in++)
{
- for (j = 0;j < 2;j++)
- {
- val = DotProduct(v, tex->vecs[j]) + tex->vecs[j][3];
- if (mins[j] > val)
- mins[j] = val;
- if (maxs[j] < val)
- maxs[j] = val;
- }
- }
- for (i = 0;i < 2;i++)
- {
- surf->texturemins[i] = (int) floor(mins[i] / 16) * 16;
- surf->extents[i] = (int) ceil(maxs[i] / 16) * 16 - surf->texturemins[i];
+ numedges = LittleShort(in->numedges);
+ totalverts += numedges;
+ totaltris += numedges - 2;
}
-}
-
-static void Mod_Q1BSP_LoadFaces(lump_t *l)
-{
- dface_t *in;
- msurface_t *surf;
- int i, count, surfnum, planenum, ssize, tsize, firstedge, numedges, totalverts, totaltris, totalmeshes;
- surfmesh_t *mesh;
- float s, t;
-
- in = (void *)(mod_base + l->fileofs);
- if (l->filelen % sizeof(*in))
- Host_Error("Mod_Q1BSP_LoadFaces: funny lump size in %s",loadmodel->name);
- count = l->filelen / sizeof(*in);
- loadmodel->brushq1.surfaces = Mem_Alloc(loadmodel->mempool, count*sizeof(msurface_t));
- loadmodel->brushq1.numsurfaces = count;
- loadmodel->brushq1.surfacevisframes = Mem_Alloc(loadmodel->mempool, count * sizeof(int));
- loadmodel->brushq1.surfacepvsframes = Mem_Alloc(loadmodel->mempool, count * sizeof(int));
- loadmodel->brushq1.pvssurflist = Mem_Alloc(loadmodel->mempool, count * sizeof(int));
+ // TODO: split up into multiple meshes as needed to avoid exceeding 65536
+ // vertex limit
+ loadmodel->nummeshes = 1;
+ loadmodel->meshlist = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t *));
+ loadmodel->meshlist[0] = Mod_AllocSurfMesh(loadmodel->mempool, totalverts, totaltris, true, true, false, false);
- for (surfnum = 0, surf = loadmodel->brushq1.surfaces, totalverts = 0, totaltris = 0, totalmeshes = 0;surfnum < count;surfnum++, totalverts += surf->poly_numverts, totaltris += surf->poly_numverts - 2, totalmeshes++, in++, surf++)
+ totalverts = 0;
+ totaltris = 0;
+ for (surfacenum = 0, in = (void *)(mod_base + l->fileofs), surface = loadmodel->data_surfaces;surfacenum < count;surfacenum++, in++, surface++)
{
- surf->number = surfnum;
+ surface->lightmapinfo = loadmodel->data_surfaces_lightmapinfo + surfacenum;
+
// FIXME: validate edges, texinfo, etc?
firstedge = LittleLong(in->firstedge);
numedges = LittleShort(in->numedges);
i = LittleShort(in->texinfo);
if ((unsigned int) i >= (unsigned int) loadmodel->brushq1.numtexinfo)
Host_Error("Mod_Q1BSP_LoadFaces: invalid texinfo index %i(model has %i texinfos)\n", i, loadmodel->brushq1.numtexinfo);
- surf->texinfo = loadmodel->brushq1.texinfo + i;
- surf->flags = surf->texinfo->texture->flags;
+ surface->lightmapinfo->texinfo = loadmodel->brushq1.texinfo + i;
+ surface->texture = surface->lightmapinfo->texinfo->texture;
planenum = LittleShort(in->planenum);
- if ((unsigned int) planenum >= (unsigned int) loadmodel->brushq1.numplanes)
- Host_Error("Mod_Q1BSP_LoadFaces: invalid plane index %i (model has %i planes)\n", planenum, loadmodel->brushq1.numplanes);
-
- if (LittleShort(in->side))
- surf->flags |= SURF_PLANEBACK;
-
- surf->plane = loadmodel->brushq1.planes + planenum;
+ if ((unsigned int) planenum >= (unsigned int) loadmodel->brush.num_planes)
+ Host_Error("Mod_Q1BSP_LoadFaces: invalid plane index %i (model has %i planes)\n", planenum, loadmodel->brush.num_planes);
+
+ //surface->flags = surface->texture->flags;
+ //if (LittleShort(in->side))
+ // surface->flags |= SURF_PLANEBACK;
+ //surface->plane = loadmodel->brush.data_planes + planenum;
+
+ surface->groupmesh = loadmodel->meshlist[0];
+ surface->num_firstvertex = totalverts;
+ surface->num_vertices = numedges;
+ surface->num_firsttriangle = totaltris;
+ surface->num_triangles = numedges - 2;
+ totalverts += numedges;
+ totaltris += numedges - 2;
+
+ // convert edges back to a normal polygon
+ for (i = 0;i < surface->num_vertices;i++)
+ {
+ int lindex = loadmodel->brushq1.surfedges[firstedge + i];
+ float s, t;
+ if (lindex > 0)
+ VectorCopy(loadmodel->brushq1.vertexes[loadmodel->brushq1.edges[lindex].v[0]].position, (surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3);
+ else
+ VectorCopy(loadmodel->brushq1.vertexes[loadmodel->brushq1.edges[-lindex].v[1]].position, (surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3);
+ s = DotProduct(((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3), surface->lightmapinfo->texinfo->vecs[0]) + surface->lightmapinfo->texinfo->vecs[0][3];
+ t = DotProduct(((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3), surface->lightmapinfo->texinfo->vecs[1]) + surface->lightmapinfo->texinfo->vecs[1][3];
+ (surface->groupmesh->data_texcoordtexture2f + 2 * surface->num_firstvertex)[i * 2 + 0] = s / surface->texture->width;
+ (surface->groupmesh->data_texcoordtexture2f + 2 * surface->num_firstvertex)[i * 2 + 1] = t / surface->texture->height;
+ (surface->groupmesh->data_texcoorddetail2f + 2 * surface->num_firstvertex)[i * 2 + 0] = s * (1.0f / 16.0f);
+ (surface->groupmesh->data_texcoorddetail2f + 2 * surface->num_firstvertex)[i * 2 + 1] = t * (1.0f / 16.0f);
+ (surface->groupmesh->data_texcoordlightmap2f + 2 * surface->num_firstvertex)[i * 2 + 0] = 0;
+ (surface->groupmesh->data_texcoordlightmap2f + 2 * surface->num_firstvertex)[i * 2 + 1] = 0;
+ (surface->groupmesh->data_lightmapoffsets + surface->num_firstvertex)[i] = 0;
+ }
- // clear lightmap (filled in later)
- surf->lightmaptexture = NULL;
+ for (i = 0;i < surface->num_triangles;i++)
+ {
+ (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle)[i * 3 + 0] = 0 + surface->num_firstvertex;
+ (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle)[i * 3 + 1] = i + 1 + surface->num_firstvertex;
+ (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle)[i * 3 + 2] = i + 2 + surface->num_firstvertex;
+ }
- // force lightmap upload on first time seeing the surface
- surf->cached_dlight = true;
+ // compile additional data about the surface geometry
+ Mod_BuildTextureVectorsAndNormals(surface->num_firstvertex, surface->num_vertices, surface->num_triangles, surface->groupmesh->data_vertex3f, surface->groupmesh->data_texcoordtexture2f, (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle), surface->groupmesh->data_svector3f, surface->groupmesh->data_tvector3f, surface->groupmesh->data_normal3f, true);
+ BoxFromPoints(surface->mins, surface->maxs, surface->num_vertices, (surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex));
- Mod_Q1BSP_GenerateSurfacePolygon(surf, firstedge, numedges);
+ // generate surface extents information
+ texmins[0] = texmaxs[0] = DotProduct((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex), surface->lightmapinfo->texinfo->vecs[0]) + surface->lightmapinfo->texinfo->vecs[0][3];
+ texmins[1] = texmaxs[1] = DotProduct((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex), surface->lightmapinfo->texinfo->vecs[1]) + surface->lightmapinfo->texinfo->vecs[1][3];
+ for (i = 1;i < surface->num_vertices;i++)
+ {
+ for (j = 0;j < 2;j++)
+ {
+ val = DotProduct((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3, surface->lightmapinfo->texinfo->vecs[j]) + surface->lightmapinfo->texinfo->vecs[j][3];
+ texmins[j] = min(texmins[j], val);
+ texmaxs[j] = max(texmaxs[j], val);
+ }
+ }
+ for (i = 0;i < 2;i++)
+ {
+ surface->lightmapinfo->texturemins[i] = (int) floor(texmins[i] / 16.0) * 16;
+ surface->lightmapinfo->extents[i] = (int) ceil(texmaxs[i] / 16.0) * 16 - surface->lightmapinfo->texturemins[i];
+ }
- ssize = (surf->extents[0] >> 4) + 1;
- tsize = (surf->extents[1] >> 4) + 1;
+ smax = surface->lightmapinfo->extents[0] >> 4;
+ tmax = surface->lightmapinfo->extents[1] >> 4;
+ ssize = (surface->lightmapinfo->extents[0] >> 4) + 1;
+ tsize = (surface->lightmapinfo->extents[1] >> 4) + 1;
// lighting info
for (i = 0;i < MAXLIGHTMAPS;i++)
- surf->styles[i] = in->styles[i];
+ surface->lightmapinfo->styles[i] = in->styles[i];
+ // force lightmap upload on first time seeing the surface
+ surface->cached_dlight = true;
+ surface->lightmapinfo->lightmaptexturestride = 0;
+ surface->lightmaptexture = NULL;
i = LittleLong(in->lightofs);
if (i == -1)
- surf->samples = NULL;
- else if (loadmodel->brushq1.ishlbsp) // LordHavoc: HalfLife map (bsp version 30)
- surf->samples = loadmodel->brushq1.lightdata + i;
- else // LordHavoc: white lighting (bsp version 29)
- surf->samples = loadmodel->brushq1.lightdata + (i * 3);
-
- if (surf->texinfo->texture->shader == &Cshader_wall_lightmap)
- {
- if ((surf->extents[0] >> 4) + 1 > (256) || (surf->extents[1] >> 4) + 1 > (256))
- Host_Error("Bad surface extents");
- // stainmap for permanent marks on walls
- surf->stainsamples = Mem_Alloc(loadmodel->mempool, ssize * tsize * 3);
- // clear to white
- memset(surf->stainsamples, 255, ssize * tsize * 3);
- }
- }
-
- loadmodel->brushq1.entiremesh = Mod_Q1BSP_AllocSurfMesh(totalverts, totaltris);
- loadmodel->brushq1.surfmeshes = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t) * totalmeshes);
-
- for (surfnum = 0, surf = loadmodel->brushq1.surfaces, totalverts = 0, totaltris = 0, totalmeshes = 0;surfnum < count;surfnum++, totalverts += surf->poly_numverts, totaltris += surf->poly_numverts - 2, totalmeshes++, surf++)
- {
- mesh = surf->mesh = loadmodel->brushq1.surfmeshes + totalmeshes;
- mesh->numverts = surf->poly_numverts;
- mesh->numtriangles = surf->poly_numverts - 2;
- mesh->vertex3f = loadmodel->brushq1.entiremesh->vertex3f + totalverts * 3;
- mesh->texcoordtexture2f = loadmodel->brushq1.entiremesh->texcoordtexture2f + totalverts * 2;
- mesh->texcoordlightmap2f = loadmodel->brushq1.entiremesh->texcoordlightmap2f + totalverts * 2;
- mesh->texcoorddetail2f = loadmodel->brushq1.entiremesh->texcoorddetail2f + totalverts * 2;
- mesh->svector3f = loadmodel->brushq1.entiremesh->svector3f + totalverts * 3;
- mesh->tvector3f = loadmodel->brushq1.entiremesh->tvector3f + totalverts * 3;
- mesh->normal3f = loadmodel->brushq1.entiremesh->normal3f + totalverts * 3;
- mesh->lightmapoffsets = loadmodel->brushq1.entiremesh->lightmapoffsets + totalverts;
- mesh->element3i = loadmodel->brushq1.entiremesh->element3i + totaltris * 3;
- mesh->neighbor3i = loadmodel->brushq1.entiremesh->neighbor3i + totaltris * 3;
-
- surf->lightmaptexturestride = 0;
- surf->lightmaptexture = NULL;
-
- for (i = 0;i < mesh->numverts;i++)
- {
- mesh->vertex3f[i * 3 + 0] = surf->poly_verts[i * 3 + 0];
- mesh->vertex3f[i * 3 + 1] = surf->poly_verts[i * 3 + 1];
- mesh->vertex3f[i * 3 + 2] = surf->poly_verts[i * 3 + 2];
- s = DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[0]) + surf->texinfo->vecs[0][3];
- t = DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[1]) + surf->texinfo->vecs[1][3];
- mesh->texcoordtexture2f[i * 2 + 0] = s / surf->texinfo->texture->width;
- mesh->texcoordtexture2f[i * 2 + 1] = t / surf->texinfo->texture->height;
- mesh->texcoorddetail2f[i * 2 + 0] = s * (1.0f / 16.0f);
- mesh->texcoorddetail2f[i * 2 + 1] = t * (1.0f / 16.0f);
- mesh->texcoordlightmap2f[i * 2 + 0] = 0;
- mesh->texcoordlightmap2f[i * 2 + 1] = 0;
- mesh->lightmapoffsets[i] = 0;
- }
-
- for (i = 0;i < mesh->numtriangles;i++)
{
- mesh->element3i[i * 3 + 0] = 0;
- mesh->element3i[i * 3 + 1] = i + 1;
- mesh->element3i[i * 3 + 2] = i + 2;
+ surface->lightmapinfo->samples = NULL;
+ // give non-lightmapped water a 1x white lightmap
+ if ((surface->texture->basematerialflags & MATERIALFLAG_WATER) && (surface->lightmapinfo->texinfo->flags & TEX_SPECIAL) && ssize <= 256 && tsize <= 256)
+ {
+ surface->lightmapinfo->samples = Mem_Alloc(loadmodel->mempool, ssize * tsize * 3);
+ surface->lightmapinfo->styles[0] = 0;
+ memset(surface->lightmapinfo->samples, 128, ssize * tsize * 3);
+ }
}
+ else if (loadmodel->brush.ishlbsp) // LordHavoc: HalfLife map (bsp version 30)
+ surface->lightmapinfo->samples = loadmodel->brushq1.lightdata + i;
+ else // LordHavoc: white lighting (bsp version 29)
+ surface->lightmapinfo->samples = loadmodel->brushq1.lightdata + (i * 3);
- Mod_BuildTriangleNeighbors(mesh->neighbor3i, mesh->element3i, mesh->numtriangles);
- Mod_BuildTextureVectorsAndNormals(mesh->numverts, mesh->numtriangles, mesh->vertex3f, mesh->texcoordtexture2f, mesh->element3i, mesh->svector3f, mesh->tvector3f, mesh->normal3f);
-
- if (surf->texinfo->texture->shader == &Cshader_wall_lightmap)
+ if (!(surface->lightmapinfo->texinfo->flags & TEX_SPECIAL) || surface->lightmapinfo->samples)
{
- int i, iu, iv, smax, tmax;
+ int i, iu, iv;
float u, v, ubase, vbase, uscale, vscale;
- smax = surf->extents[0] >> 4;
- tmax = surf->extents[1] >> 4;
+ if (ssize > 256 || tsize > 256)
+ Host_Error("Bad surface extents");
+ // stainmap for permanent marks on walls
+ surface->lightmapinfo->stainsamples = Mem_Alloc(loadmodel->mempool, ssize * tsize * 3);
+ // clear to white
+ memset(surface->lightmapinfo->stainsamples, 255, ssize * tsize * 3);
- surf->flags |= SURF_LIGHTMAP;
if (r_miplightmaps.integer)
{
- surf->lightmaptexturestride = smax+1;
- surf->lightmaptexture = R_LoadTexture2D(loadmodel->texturepool, NULL, surf->lightmaptexturestride, (surf->extents[1]>>4)+1, NULL, loadmodel->brushq1.lightmaprgba ? TEXTYPE_RGBA : TEXTYPE_RGB, TEXF_MIPMAP | TEXF_FORCELINEAR | TEXF_PRECACHE, NULL);
+ surface->lightmapinfo->lightmaptexturestride = ssize;
+ surface->lightmaptexture = R_LoadTexture2D(loadmodel->texturepool, NULL, surface->lightmapinfo->lightmaptexturestride, tsize, NULL, loadmodel->brushq1.lightmaprgba ? TEXTYPE_RGBA : TEXTYPE_RGB, TEXF_MIPMAP | TEXF_FORCELINEAR | TEXF_PRECACHE, NULL);
}
else
{
- surf->lightmaptexturestride = R_CompatibleFragmentWidth(smax+1, loadmodel->brushq1.lightmaprgba ? TEXTYPE_RGBA : TEXTYPE_RGB, 0);
- surf->lightmaptexture = R_LoadTexture2D(loadmodel->texturepool, NULL, surf->lightmaptexturestride, (surf->extents[1]>>4)+1, NULL, loadmodel->brushq1.lightmaprgba ? TEXTYPE_RGBA : TEXTYPE_RGB, TEXF_FRAGMENT | TEXF_FORCELINEAR | TEXF_PRECACHE, NULL);
+ surface->lightmapinfo->lightmaptexturestride = R_CompatibleFragmentWidth(ssize, loadmodel->brushq1.lightmaprgba ? TEXTYPE_RGBA : TEXTYPE_RGB, 0);
+ surface->lightmaptexture = R_LoadTexture2D(loadmodel->texturepool, NULL, surface->lightmapinfo->lightmaptexturestride, tsize, NULL, loadmodel->brushq1.lightmaprgba ? TEXTYPE_RGBA : TEXTYPE_RGB, TEXF_FRAGMENT | TEXF_FORCELINEAR | TEXF_PRECACHE, NULL);
}
- R_FragmentLocation(surf->lightmaptexture, NULL, NULL, &ubase, &vbase, &uscale, &vscale);
- uscale = (uscale - ubase) / (smax + 1);
- vscale = (vscale - vbase) / (tmax + 1);
+ R_FragmentLocation(surface->lightmaptexture, NULL, NULL, &ubase, &vbase, &uscale, &vscale);
+ uscale = (uscale - ubase) / ssize;
+ vscale = (vscale - vbase) / tsize;
- for (i = 0;i < mesh->numverts;i++)
+ for (i = 0;i < surface->num_vertices;i++)
{
- u = ((DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[0]) + surf->texinfo->vecs[0][3]) + 8 - surf->texturemins[0]) * (1.0 / 16.0);
- v = ((DotProduct((mesh->vertex3f + i * 3), surf->texinfo->vecs[1]) + surf->texinfo->vecs[1][3]) + 8 - surf->texturemins[1]) * (1.0 / 16.0);
- mesh->texcoordlightmap2f[i * 2 + 0] = u * uscale + ubase;
- mesh->texcoordlightmap2f[i * 2 + 1] = v * vscale + vbase;
+ u = ((DotProduct(((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3), surface->lightmapinfo->texinfo->vecs[0]) + surface->lightmapinfo->texinfo->vecs[0][3]) + 8 - surface->lightmapinfo->texturemins[0]) * (1.0 / 16.0);
+ v = ((DotProduct(((surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex) + i * 3), surface->lightmapinfo->texinfo->vecs[1]) + surface->lightmapinfo->texinfo->vecs[1][3]) + 8 - surface->lightmapinfo->texturemins[1]) * (1.0 / 16.0);
+ (surface->groupmesh->data_texcoordlightmap2f + 2 * surface->num_firstvertex)[i * 2 + 0] = u * uscale + ubase;
+ (surface->groupmesh->data_texcoordlightmap2f + 2 * surface->num_firstvertex)[i * 2 + 1] = v * vscale + vbase;
// LordHavoc: calc lightmap data offset for vertex lighting to use
iu = (int) u;
iv = (int) v;
- mesh->lightmapoffsets[i] = (bound(0, iv, tmax) * (smax+1) + bound(0, iu, smax)) * 3;
+ (surface->groupmesh->data_lightmapoffsets + surface->num_firstvertex)[i] = (bound(0, iv, tmax) * ssize + bound(0, iu, smax)) * 3;
}
}
}
}
-static void Mod_Q1BSP_SetParent(mnode_t *node, mnode_t *parent)
+static void Mod_Q1BSP_LoadNodes_RecursiveSetParent(mnode_t *node, mnode_t *parent)
{
+ //if (node->parent)
+ // Host_Error("Mod_Q1BSP_LoadNodes_RecursiveSetParent: runaway recursion\n");
node->parent = parent;
- if (node->contents < 0)
- return;
- Mod_Q1BSP_SetParent(node->children[0], node);
- Mod_Q1BSP_SetParent(node->children[1], node);
+ if (node->plane)
+ {
+ Mod_Q1BSP_LoadNodes_RecursiveSetParent(node->children[0], node);
+ Mod_Q1BSP_LoadNodes_RecursiveSetParent(node->children[1], node);
+ }
}
static void Mod_Q1BSP_LoadNodes(lump_t *l)
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count*sizeof(*out));
- loadmodel->brushq1.nodes = out;
- loadmodel->brushq1.numnodes = count;
+ loadmodel->brush.data_nodes = out;
+ loadmodel->brush.num_nodes = count;
for ( i=0 ; i<count ; i++, in++, out++)
{
}
p = LittleLong(in->planenum);
- out->plane = loadmodel->brushq1.planes + p;
+ out->plane = loadmodel->brush.data_planes + p;
out->firstsurface = LittleShort(in->firstface);
out->numsurfaces = LittleShort(in->numfaces);
{
p = LittleShort(in->children[j]);
if (p >= 0)
- out->children[j] = loadmodel->brushq1.nodes + p;
+ out->children[j] = loadmodel->brush.data_nodes + p;
else
- out->children[j] = (mnode_t *)(loadmodel->brushq1.leafs + (-1 - p));
+ out->children[j] = (mnode_t *)(loadmodel->brush.data_leafs + (-1 - p));
}
}
- Mod_Q1BSP_SetParent(loadmodel->brushq1.nodes, NULL); // sets nodes and leafs
+ Mod_Q1BSP_LoadNodes_RecursiveSetParent(loadmodel->brush.data_nodes, NULL); // sets nodes and leafs
}
static void Mod_Q1BSP_LoadLeafs(lump_t *l)
{
- dleaf_t *in;
- mleaf_t *out;
- int i, j, count, p;
+ dleaf_t *in;
+ mleaf_t *out;
+ int i, j, count, p;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count*sizeof(*out));
- loadmodel->brushq1.leafs = out;
- loadmodel->brushq1.numleafs = count;
+ loadmodel->brush.data_leafs = out;
+ loadmodel->brush.num_leafs = count;
+ // get visleafs from the submodel data
+ loadmodel->brush.num_pvsclusters = loadmodel->brushq1.submodels[0].visleafs;
+ loadmodel->brush.num_pvsclusterbytes = (loadmodel->brush.num_pvsclusters+7)>>3;
+ loadmodel->brush.data_pvsclusters = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_pvsclusters * loadmodel->brush.num_pvsclusterbytes);
+ memset(loadmodel->brush.data_pvsclusters, 0xFF, loadmodel->brush.num_pvsclusters * loadmodel->brush.num_pvsclusterbytes);
for ( i=0 ; i<count ; i++, in++, out++)
{
out->maxs[j] = LittleShort(in->maxs[j]);
}
- p = LittleLong(in->contents);
- out->contents = p;
+ // FIXME: this function could really benefit from some error checking
+
+ out->contents = LittleLong(in->contents);
+
+ out->firstleafsurface = loadmodel->brush.data_leafsurfaces + LittleShort(in->firstmarksurface);
+ out->numleafsurfaces = LittleShort(in->nummarksurfaces);
+ if (out->firstleafsurface < 0 || LittleShort(in->firstmarksurface) + out->numleafsurfaces > loadmodel->brush.num_leafsurfaces)
+ {
+ Con_Printf("Mod_Q1BSP_LoadLeafs: invalid leafsurface range %i:%i outside range %i:%i\n", out->firstleafsurface, out->firstleafsurface + out->numleafsurfaces, 0, loadmodel->brush.num_leafsurfaces);
+ out->firstleafsurface = NULL;
+ out->numleafsurfaces = 0;
+ }
- out->firstmarksurface = loadmodel->brushq1.marksurfaces +
- LittleShort(in->firstmarksurface);
- out->nummarksurfaces = LittleShort(in->nummarksurfaces);
+ out->clusterindex = i - 1;
+ if (out->clusterindex >= loadmodel->brush.num_pvsclusters)
+ out->clusterindex = -1;
p = LittleLong(in->visofs);
- if (p == -1)
- out->compressed_vis = NULL;
- else
- out->compressed_vis = loadmodel->brushq1.visdata + p;
+ // ignore visofs errors on leaf 0 (solid)
+ if (p >= 0 && out->clusterindex >= 0)
+ {
+ if (p >= loadmodel->brushq1.num_compressedpvs)
+ Con_Print("Mod_Q1BSP_LoadLeafs: invalid visofs\n");
+ else
+ Mod_Q1BSP_DecompressVis(loadmodel->brushq1.data_compressedpvs + p, loadmodel->brushq1.data_compressedpvs + loadmodel->brushq1.num_compressedpvs, loadmodel->brush.data_pvsclusters + out->clusterindex * loadmodel->brush.num_pvsclusterbytes, loadmodel->brush.data_pvsclusters + (out->clusterindex + 1) * loadmodel->brush.num_pvsclusterbytes);
+ }
- for (j=0 ; j<4 ; j++)
+ for (j = 0;j < 4;j++)
out->ambient_sound_level[j] = in->ambient_level[j];
// FIXME: Insert caustics here
loadmodel->brushq1.clipnodes = out;
loadmodel->brushq1.numclipnodes = count;
- if (loadmodel->brushq1.ishlbsp)
+ if (loadmodel->brush.ishlbsp)
{
hull = &loadmodel->brushq1.hulls[1];
hull->clipnodes = out;
hull->firstclipnode = 0;
hull->lastclipnode = count-1;
- hull->planes = loadmodel->brushq1.planes;
+ hull->planes = loadmodel->brush.data_planes;
hull->clip_mins[0] = -16;
hull->clip_mins[1] = -16;
hull->clip_mins[2] = -36;
hull->clipnodes = out;
hull->firstclipnode = 0;
hull->lastclipnode = count-1;
- hull->planes = loadmodel->brushq1.planes;
+ hull->planes = loadmodel->brush.data_planes;
hull->clip_mins[0] = -32;
hull->clip_mins[1] = -32;
hull->clip_mins[2] = -32;
hull->clipnodes = out;
hull->firstclipnode = 0;
hull->lastclipnode = count-1;
- hull->planes = loadmodel->brushq1.planes;
+ hull->planes = loadmodel->brush.data_planes;
hull->clip_mins[0] = -16;
hull->clip_mins[1] = -16;
hull->clip_mins[2] = -18;
hull->clipnodes = out;
hull->firstclipnode = 0;
hull->lastclipnode = count-1;
- hull->planes = loadmodel->brushq1.planes;
+ hull->planes = loadmodel->brush.data_planes;
hull->clip_mins[0] = -16;
hull->clip_mins[1] = -16;
hull->clip_mins[2] = -24;
hull->clipnodes = out;
hull->firstclipnode = 0;
hull->lastclipnode = count-1;
- hull->planes = loadmodel->brushq1.planes;
+ hull->planes = loadmodel->brush.data_planes;
hull->clip_mins[0] = -32;
hull->clip_mins[1] = -32;
hull->clip_mins[2] = -24;
hull = &loadmodel->brushq1.hulls[0];
- in = loadmodel->brushq1.nodes;
- out = Mem_Alloc(loadmodel->mempool, loadmodel->brushq1.numnodes * sizeof(dclipnode_t));
+ in = loadmodel->brush.data_nodes;
+ out = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_nodes * sizeof(dclipnode_t));
hull->clipnodes = out;
hull->firstclipnode = 0;
- hull->lastclipnode = loadmodel->brushq1.numnodes - 1;
- hull->planes = loadmodel->brushq1.planes;
+ hull->lastclipnode = loadmodel->brush.num_nodes - 1;
+ hull->planes = loadmodel->brush.data_planes;
- for (i = 0;i < loadmodel->brushq1.numnodes;i++, out++, in++)
+ for (i = 0;i < loadmodel->brush.num_nodes;i++, out++, in++)
{
- out->planenum = in->plane - loadmodel->brushq1.planes;
- out->children[0] = in->children[0]->contents < 0 ? in->children[0]->contents : in->children[0] - loadmodel->brushq1.nodes;
- out->children[1] = in->children[1]->contents < 0 ? in->children[1]->contents : in->children[1] - loadmodel->brushq1.nodes;
+ out->planenum = in->plane - loadmodel->brush.data_planes;
+ out->children[0] = in->children[0]->plane ? in->children[0] - loadmodel->brush.data_nodes : ((mleaf_t *)in->children[0])->contents;
+ out->children[1] = in->children[1]->plane ? in->children[1] - loadmodel->brush.data_nodes : ((mleaf_t *)in->children[1])->contents;
}
}
-static void Mod_Q1BSP_LoadMarksurfaces(lump_t *l)
+static void Mod_Q1BSP_LoadLeaffaces(lump_t *l)
{
int i, j;
short *in;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
- Host_Error("Mod_Q1BSP_LoadMarksurfaces: funny lump size in %s",loadmodel->name);
- loadmodel->brushq1.nummarksurfaces = l->filelen / sizeof(*in);
- loadmodel->brushq1.marksurfaces = Mem_Alloc(loadmodel->mempool, loadmodel->brushq1.nummarksurfaces * sizeof(int));
+ Host_Error("Mod_Q1BSP_LoadLeaffaces: funny lump size in %s",loadmodel->name);
+ loadmodel->brush.num_leafsurfaces = l->filelen / sizeof(*in);
+ loadmodel->brush.data_leafsurfaces = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_leafsurfaces * sizeof(int));
- for (i = 0;i < loadmodel->brushq1.nummarksurfaces;i++)
+ for (i = 0;i < loadmodel->brush.num_leafsurfaces;i++)
{
j = (unsigned) LittleShort(in[i]);
- if (j >= loadmodel->brushq1.numsurfaces)
- Host_Error("Mod_Q1BSP_LoadMarksurfaces: bad surface number");
- loadmodel->brushq1.marksurfaces[i] = j;
+ if (j >= loadmodel->num_surfaces)
+ Host_Error("Mod_Q1BSP_LoadLeaffaces: bad surface number");
+ loadmodel->brush.data_leafsurfaces[i] = j;
}
}
if (l->filelen % sizeof(*in))
Host_Error("Mod_Q1BSP_LoadPlanes: funny lump size in %s", loadmodel->name);
- loadmodel->brushq1.numplanes = l->filelen / sizeof(*in);
- loadmodel->brushq1.planes = out = Mem_Alloc(loadmodel->mempool, loadmodel->brushq1.numplanes * sizeof(*out));
+ loadmodel->brush.num_planes = l->filelen / sizeof(*in);
+ loadmodel->brush.data_planes = out = Mem_Alloc(loadmodel->mempool, loadmodel->brush.num_planes * sizeof(*out));
- for (i = 0;i < loadmodel->brushq1.numplanes;i++, in++, out++)
+ for (i = 0;i < loadmodel->brush.num_planes;i++, in++, out++)
{
out->normal[0] = LittleFloat(in->normal[0]);
out->normal[1] = LittleFloat(in->normal[1]);
}
}
-#define MAX_POINTS_ON_WINDING 64
-
-typedef struct
-{
- int numpoints;
- int padding;
- double points[8][3]; // variable sized
-}
-winding_t;
-
-/*
-==================
-NewWinding
-==================
-*/
-static winding_t *NewWinding(int points)
-{
- winding_t *w;
- int size;
-
- if (points > MAX_POINTS_ON_WINDING)
- Sys_Error("NewWinding: too many points\n");
-
- size = sizeof(winding_t) + sizeof(double[3]) * (points - 8);
- w = Mem_Alloc(loadmodel->mempool, size);
- memset(w, 0, size);
-
- return w;
-}
-
-static void FreeWinding(winding_t *w)
-{
- Mem_Free(w);
-}
-
-/*
-=================
-BaseWindingForPlane
-=================
-*/
-static winding_t *BaseWindingForPlane(mplane_t *p)
-{
- double org[3], vright[3], vup[3], normal[3];
- winding_t *w;
-
- VectorCopy(p->normal, normal);
- VectorVectorsDouble(normal, vright, vup);
-
- VectorScale(vup, 1024.0*1024.0*1024.0, vup);
- VectorScale(vright, 1024.0*1024.0*1024.0, vright);
-
- // project a really big axis aligned box onto the plane
- w = NewWinding(4);
-
- VectorScale(p->normal, p->dist, org);
-
- VectorSubtract(org, vright, w->points[0]);
- VectorAdd(w->points[0], vup, w->points[0]);
-
- VectorAdd(org, vright, w->points[1]);
- VectorAdd(w->points[1], vup, w->points[1]);
-
- VectorAdd(org, vright, w->points[2]);
- VectorSubtract(w->points[2], vup, w->points[2]);
-
- VectorSubtract(org, vright, w->points[3]);
- VectorSubtract(w->points[3], vup, w->points[3]);
-
- w->numpoints = 4;
-
- return w;
-}
-
-/*
-==================
-ClipWinding
-
-Clips the winding to the plane, returning the new winding on the positive side
-Frees the input winding.
-If keepon is true, an exactly on-plane winding will be saved, otherwise
-it will be clipped away.
-==================
-*/
-static winding_t *ClipWinding(winding_t *in, mplane_t *split, int keepon)
+static void Mod_Q1BSP_LoadMapBrushes(void)
{
- double dists[MAX_POINTS_ON_WINDING + 1];
- int sides[MAX_POINTS_ON_WINDING + 1];
- int counts[3];
- double dot;
- int i, j;
- double *p1, *p2;
- double mid[3];
- winding_t *neww;
- int maxpts;
-
- counts[SIDE_FRONT] = counts[SIDE_BACK] = counts[SIDE_ON] = 0;
-
- // determine sides for each point
- for (i = 0;i < in->numpoints;i++)
- {
- dists[i] = dot = DotProduct(in->points[i], split->normal) - split->dist;
- if (dot > ON_EPSILON)
- sides[i] = SIDE_FRONT;
- else if (dot < -ON_EPSILON)
- sides[i] = SIDE_BACK;
- else
- sides[i] = SIDE_ON;
- counts[sides[i]]++;
- }
- sides[i] = sides[0];
- dists[i] = dists[0];
-
- if (keepon && !counts[0] && !counts[1])
- return in;
-
- if (!counts[0])
- {
- FreeWinding(in);
- return NULL;
- }
- if (!counts[1])
- return in;
-
- maxpts = in->numpoints+4; // can't use counts[0]+2 because of fp grouping errors
- if (maxpts > MAX_POINTS_ON_WINDING)
- Sys_Error("ClipWinding: maxpts > MAX_POINTS_ON_WINDING");
-
- neww = NewWinding(maxpts);
-
- for (i = 0;i < in->numpoints;i++)
+#if 0
+// unfinished
+ int submodel, numbrushes;
+ qboolean firstbrush;
+ char *text, *maptext;
+ char mapfilename[MAX_QPATH];
+ FS_StripExtension (loadmodel->name, mapfilename, sizeof (mapfilename));
+ strlcat (mapfilename, ".map", sizeof (mapfilename));
+ maptext = (qbyte*) FS_LoadFile(mapfilename, tempmempool, false);
+ if (!maptext)
+ return;
+ text = maptext;
+ if (!COM_ParseToken(&data, false))
+ return; // error
+ submodel = 0;
+ for (;;)
{
- if (neww->numpoints >= maxpts)
- Sys_Error("ClipWinding: points exceeded estimate");
-
- p1 = in->points[i];
-
- if (sides[i] == SIDE_ON)
- {
- VectorCopy(p1, neww->points[neww->numpoints]);
- neww->numpoints++;
- continue;
- }
-
- if (sides[i] == SIDE_FRONT)
+ if (!COM_ParseToken(&data, false))
+ break;
+ if (com_token[0] != '{')
+ return; // error
+ // entity
+ firstbrush = true;
+ numbrushes = 0;
+ maxbrushes = 256;
+ brushes = Mem_Alloc(loadmodel->mempool, maxbrushes * sizeof(mbrush_t));
+ for (;;)
{
- VectorCopy(p1, neww->points[neww->numpoints]);
- neww->numpoints++;
- }
-
- if (sides[i+1] == SIDE_ON || sides[i+1] == sides[i])
- continue;
-
- // generate a split point
- p2 = in->points[(i+1)%in->numpoints];
-
- dot = dists[i] / (dists[i]-dists[i+1]);
- for (j = 0;j < 3;j++)
- { // avoid round off error when possible
- if (split->normal[j] == 1)
- mid[j] = split->dist;
- else if (split->normal[j] == -1)
- mid[j] = -split->dist;
- else
- mid[j] = p1[j] + dot* (p2[j]-p1[j]);
+ if (!COM_ParseToken(&data, false))
+ return; // error
+ if (com_token[0] == '}')
+ break; // end of entity
+ if (com_token[0] == '{')
+ {
+ // brush
+ if (firstbrush)
+ {
+ if (submodel)
+ {
+ if (submodel > loadmodel->brush.numsubmodels)
+ {
+ Con_Printf("Mod_Q1BSP_LoadMapBrushes: .map has more submodels than .bsp!\n");
+ model = NULL;
+ }
+ else
+ model = loadmodel->brush.submodels[submodel];
+ }
+ else
+ model = loadmodel;
+ }
+ for (;;)
+ {
+ if (!COM_ParseToken(&data, false))
+ return; // error
+ if (com_token[0] == '}')
+ break; // end of brush
+ // each brush face should be this format:
+ // ( x y z ) ( x y z ) ( x y z ) texture scroll_s scroll_t rotateangle scale_s scale_t
+ // FIXME: support hl .map format
+ for (pointnum = 0;pointnum < 3;pointnum++)
+ {
+ COM_ParseToken(&data, false);
+ for (componentnum = 0;componentnum < 3;componentnum++)
+ {
+ COM_ParseToken(&data, false);
+ point[pointnum][componentnum] = atof(com_token);
+ }
+ COM_ParseToken(&data, false);
+ }
+ COM_ParseToken(&data, false);
+ strlcpy(facetexture, com_token, sizeof(facetexture));
+ COM_ParseToken(&data, false);
+ //scroll_s = atof(com_token);
+ COM_ParseToken(&data, false);
+ //scroll_t = atof(com_token);
+ COM_ParseToken(&data, false);
+ //rotate = atof(com_token);
+ COM_ParseToken(&data, false);
+ //scale_s = atof(com_token);
+ COM_ParseToken(&data, false);
+ //scale_t = atof(com_token);
+ TriangleNormal(point[0], point[1], point[2], planenormal);
+ VectorNormalizeDouble(planenormal);
+ planedist = DotProduct(point[0], planenormal);
+ //ChooseTexturePlane(planenormal, texturevector[0], texturevector[1]);
+ }
+ continue;
+ }
}
-
- VectorCopy(mid, neww->points[neww->numpoints]);
- neww->numpoints++;
}
-
- // free the original winding
- FreeWinding(in);
-
- return neww;
+#endif
}
-/*
-==================
-DivideWinding
-
-Divides a winding by a plane, producing one or two windings. The
-original winding is not damaged or freed. If only on one side, the
-returned winding will be the input winding. If on both sides, two
-new windings will be created.
-==================
-*/
-static void DivideWinding(winding_t *in, mplane_t *split, winding_t **front, winding_t **back)
-{
- double dists[MAX_POINTS_ON_WINDING + 1];
- int sides[MAX_POINTS_ON_WINDING + 1];
- int counts[3];
- double dot;
- int i, j;
- double *p1, *p2;
- double mid[3];
- winding_t *f, *b;
- int maxpts;
-
- counts[SIDE_FRONT] = counts[SIDE_BACK] = counts[SIDE_ON] = 0;
-
- // determine sides for each point
- for (i = 0;i < in->numpoints;i++)
- {
- dot = DotProduct(in->points[i], split->normal);
- dot -= split->dist;
- dists[i] = dot;
- if (dot > ON_EPSILON) sides[i] = SIDE_FRONT;
- else if (dot < -ON_EPSILON) sides[i] = SIDE_BACK;
- else sides[i] = SIDE_ON;
- counts[sides[i]]++;
- }
- sides[i] = sides[0];
- dists[i] = dists[0];
-
- *front = *back = NULL;
-
- if (!counts[0])
- {
- *back = in;
- return;
- }
- if (!counts[1])
- {
- *front = in;
- return;
- }
-
- maxpts = in->numpoints+4; // can't use counts[0]+2 because of fp grouping errors
-
- if (maxpts > MAX_POINTS_ON_WINDING)
- Sys_Error("ClipWinding: maxpts > MAX_POINTS_ON_WINDING");
-
- *front = f = NewWinding(maxpts);
- *back = b = NewWinding(maxpts);
-
- for (i = 0;i < in->numpoints;i++)
- {
- if (f->numpoints >= maxpts || b->numpoints >= maxpts)
- Sys_Error("DivideWinding: points exceeded estimate");
-
- p1 = in->points[i];
-
- if (sides[i] == SIDE_ON)
- {
- VectorCopy(p1, f->points[f->numpoints]);
- f->numpoints++;
- VectorCopy(p1, b->points[b->numpoints]);
- b->numpoints++;
- continue;
- }
-
- if (sides[i] == SIDE_FRONT)
- {
- VectorCopy(p1, f->points[f->numpoints]);
- f->numpoints++;
- }
- else if (sides[i] == SIDE_BACK)
- {
- VectorCopy(p1, b->points[b->numpoints]);
- b->numpoints++;
- }
-
- if (sides[i+1] == SIDE_ON || sides[i+1] == sides[i])
- continue;
-
- // generate a split point
- p2 = in->points[(i+1)%in->numpoints];
-
- dot = dists[i] / (dists[i]-dists[i+1]);
- for (j = 0;j < 3;j++)
- { // avoid round off error when possible
- if (split->normal[j] == 1)
- mid[j] = split->dist;
- else if (split->normal[j] == -1)
- mid[j] = -split->dist;
- else
- mid[j] = p1[j] + dot* (p2[j]-p1[j]);
- }
-
- VectorCopy(mid, f->points[f->numpoints]);
- f->numpoints++;
- VectorCopy(mid, b->points[b->numpoints]);
- b->numpoints++;
- }
-}
+#define MAX_PORTALPOINTS 64
typedef struct portal_s
{
mplane_t plane;
mnode_t *nodes[2]; // [0] = front side of plane
struct portal_s *next[2];
- winding_t *winding;
+ int numpoints;
+ double points[3*MAX_PORTALPOINTS];
struct portal_s *chain; // all portals are linked into a list
}
portal_t;
static void Mod_Q1BSP_RecursiveRecalcNodeBBox(mnode_t *node)
{
+ // process only nodes (leafs already had their box calculated)
+ if (!node->plane)
+ return;
+
// calculate children first
- if (node->children[0]->contents >= 0)
- Mod_Q1BSP_RecursiveRecalcNodeBBox(node->children[0]);
- if (node->children[1]->contents >= 0)
- Mod_Q1BSP_RecursiveRecalcNodeBBox(node->children[1]);
+ Mod_Q1BSP_RecursiveRecalcNodeBBox(node->children[0]);
+ Mod_Q1BSP_RecursiveRecalcNodeBBox(node->children[1]);
// make combined bounding box from children
node->mins[0] = min(node->children[0]->mins[0], node->children[1]->mins[0]);
mportal_t *portal;
mvertex_t *point;
mleaf_t *leaf, *endleaf;
- winding_t *w;
// recalculate bounding boxes for all leafs(because qbsp is very sloppy)
- leaf = loadmodel->brushq1.leafs;
- endleaf = leaf + loadmodel->brushq1.numleafs;
+ leaf = loadmodel->brush.data_leafs;
+ endleaf = leaf + loadmodel->brush.num_leafs;
for (;leaf < endleaf;leaf++)
{
VectorSet(leaf->mins, 2000000000, 2000000000, 2000000000);
p = portalchain;
while (p)
{
- if (p->winding)
+ if (p->numpoints >= 3)
{
for (i = 0;i < 2;i++)
{
leaf = (mleaf_t *)p->nodes[i];
- w = p->winding;
- for (j = 0;j < w->numpoints;j++)
+ for (j = 0;j < p->numpoints;j++)
{
- if (leaf->mins[0] > w->points[j][0]) leaf->mins[0] = w->points[j][0];
- if (leaf->mins[1] > w->points[j][1]) leaf->mins[1] = w->points[j][1];
- if (leaf->mins[2] > w->points[j][2]) leaf->mins[2] = w->points[j][2];
- if (leaf->maxs[0] < w->points[j][0]) leaf->maxs[0] = w->points[j][0];
- if (leaf->maxs[1] < w->points[j][1]) leaf->maxs[1] = w->points[j][1];
- if (leaf->maxs[2] < w->points[j][2]) leaf->maxs[2] = w->points[j][2];
+ if (leaf->mins[0] > p->points[j*3+0]) leaf->mins[0] = p->points[j*3+0];
+ if (leaf->mins[1] > p->points[j*3+1]) leaf->mins[1] = p->points[j*3+1];
+ if (leaf->mins[2] > p->points[j*3+2]) leaf->mins[2] = p->points[j*3+2];
+ if (leaf->maxs[0] < p->points[j*3+0]) leaf->maxs[0] = p->points[j*3+0];
+ if (leaf->maxs[1] < p->points[j*3+1]) leaf->maxs[1] = p->points[j*3+1];
+ if (leaf->maxs[2] < p->points[j*3+2]) leaf->maxs[2] = p->points[j*3+2];
}
}
}
p = p->chain;
}
- Mod_Q1BSP_RecursiveRecalcNodeBBox(loadmodel->brushq1.nodes);
+ Mod_Q1BSP_RecursiveRecalcNodeBBox(loadmodel->brush.data_nodes);
// tally up portal and point counts
p = portalchain;
{
// note: this check must match the one below or it will usually corrupt memory
// the nodes[0] != nodes[1] check is because leaf 0 is the shared solid leaf, it can have many portals inside with leaf 0 on both sides
- if (p->winding && p->nodes[0] != p->nodes[1]
- && p->nodes[0]->contents != CONTENTS_SOLID && p->nodes[1]->contents != CONTENTS_SOLID
- && p->nodes[0]->contents != CONTENTS_SKY && p->nodes[1]->contents != CONTENTS_SKY)
+ if (p->numpoints >= 3 && p->nodes[0] != p->nodes[1] && ((mleaf_t *)p->nodes[0])->clusterindex >= 0 && ((mleaf_t *)p->nodes[1])->clusterindex >= 0)
{
numportals += 2;
- numpoints += p->winding->numpoints * 2;
+ numpoints += p->numpoints * 2;
}
p = p->chain;
}
- loadmodel->brushq1.portals = Mem_Alloc(loadmodel->mempool, numportals * sizeof(mportal_t) + numpoints * sizeof(mvertex_t));
- loadmodel->brushq1.numportals = numportals;
- loadmodel->brushq1.portalpoints = (void *)((qbyte *) loadmodel->brushq1.portals + numportals * sizeof(mportal_t));
- loadmodel->brushq1.numportalpoints = numpoints;
+ loadmodel->brush.data_portals = Mem_Alloc(loadmodel->mempool, numportals * sizeof(mportal_t) + numpoints * sizeof(mvertex_t));
+ loadmodel->brush.num_portals = numportals;
+ loadmodel->brush.data_portalpoints = (void *)((qbyte *) loadmodel->brush.data_portals + numportals * sizeof(mportal_t));
+ loadmodel->brush.num_portalpoints = numpoints;
// clear all leaf portal chains
- for (i = 0;i < loadmodel->brushq1.numleafs;i++)
- loadmodel->brushq1.leafs[i].portals = NULL;
+ for (i = 0;i < loadmodel->brush.num_leafs;i++)
+ loadmodel->brush.data_leafs[i].portals = NULL;
// process all portals in the global portal chain, while freeing them
- portal = loadmodel->brushq1.portals;
- point = loadmodel->brushq1.portalpoints;
+ portal = loadmodel->brush.data_portals;
+ point = loadmodel->brush.data_portalpoints;
p = portalchain;
portalchain = NULL;
while (p)
{
pnext = p->chain;
- if (p->winding)
- {
- // note: this check must match the one above or it will usually corrupt memory
- // the nodes[0] != nodes[1] check is because leaf 0 is the shared solid leaf, it can have many portals inside with leaf 0 on both sides
- if (p->nodes[0] != p->nodes[1]
- && p->nodes[0]->contents != CONTENTS_SOLID && p->nodes[1]->contents != CONTENTS_SOLID
- && p->nodes[0]->contents != CONTENTS_SKY && p->nodes[1]->contents != CONTENTS_SKY)
- {
- // first make the back to front portal(forward portal)
- portal->points = point;
- portal->numpoints = p->winding->numpoints;
- portal->plane.dist = p->plane.dist;
- VectorCopy(p->plane.normal, portal->plane.normal);
- portal->here = (mleaf_t *)p->nodes[1];
- portal->past = (mleaf_t *)p->nodes[0];
- // copy points
- for (j = 0;j < portal->numpoints;j++)
- {
- VectorCopy(p->winding->points[j], point->position);
- point++;
- }
- PlaneClassify(&portal->plane);
-
- // link into leaf's portal chain
- portal->next = portal->here->portals;
- portal->here->portals = portal;
-
- // advance to next portal
- portal++;
-
- // then make the front to back portal(backward portal)
- portal->points = point;
- portal->numpoints = p->winding->numpoints;
- portal->plane.dist = -p->plane.dist;
- VectorNegate(p->plane.normal, portal->plane.normal);
- portal->here = (mleaf_t *)p->nodes[0];
- portal->past = (mleaf_t *)p->nodes[1];
- // copy points
- for (j = portal->numpoints - 1;j >= 0;j--)
- {
- VectorCopy(p->winding->points[j], point->position);
- point++;
- }
- PlaneClassify(&portal->plane);
+ // note: this check must match the one above or it will usually corrupt memory
+ // the nodes[0] != nodes[1] check is because leaf 0 is the shared solid leaf, it can have many portals inside with leaf 0 on both sides
+ if (p->numpoints >= 3 && p->nodes[0] != p->nodes[1] && ((mleaf_t *)p->nodes[0])->clusterindex >= 0 && ((mleaf_t *)p->nodes[1])->clusterindex >= 0)
+ {
+ // first make the back to front portal(forward portal)
+ portal->points = point;
+ portal->numpoints = p->numpoints;
+ portal->plane.dist = p->plane.dist;
+ VectorCopy(p->plane.normal, portal->plane.normal);
+ portal->here = (mleaf_t *)p->nodes[1];
+ portal->past = (mleaf_t *)p->nodes[0];
+ // copy points
+ for (j = 0;j < portal->numpoints;j++)
+ {
+ VectorCopy(p->points + j*3, point->position);
+ point++;
+ }
+ BoxFromPoints(portal->mins, portal->maxs, portal->numpoints, portal->points->position);
+ PlaneClassify(&portal->plane);
+
+ // link into leaf's portal chain
+ portal->next = portal->here->portals;
+ portal->here->portals = portal;
+
+ // advance to next portal
+ portal++;
+
+ // then make the front to back portal(backward portal)
+ portal->points = point;
+ portal->numpoints = p->numpoints;
+ portal->plane.dist = -p->plane.dist;
+ VectorNegate(p->plane.normal, portal->plane.normal);
+ portal->here = (mleaf_t *)p->nodes[0];
+ portal->past = (mleaf_t *)p->nodes[1];
+ // copy points
+ for (j = portal->numpoints - 1;j >= 0;j--)
+ {
+ VectorCopy(p->points + j*3, point->position);
+ point++;
+ }
+ BoxFromPoints(portal->mins, portal->maxs, portal->numpoints, portal->points->position);
+ PlaneClassify(&portal->plane);
- // link into leaf's portal chain
- portal->next = portal->here->portals;
- portal->here->portals = portal;
+ // link into leaf's portal chain
+ portal->next = portal->here->portals;
+ portal->here->portals = portal;
- // advance to next portal
- portal++;
- }
- FreeWinding(p->winding);
+ // advance to next portal
+ portal++;
}
FreePortal(p);
p = pnext;
static void Mod_Q1BSP_RecursiveNodePortals(mnode_t *node)
{
- int side;
+ int i, side;
mnode_t *front, *back, *other_node;
mplane_t clipplane, *plane;
portal_t *portal, *nextportal, *nodeportal, *splitportal, *temp;
- winding_t *nodeportalwinding, *frontwinding, *backwinding;
+ int numfrontpoints, numbackpoints;
+ double frontpoints[3*MAX_PORTALPOINTS], backpoints[3*MAX_PORTALPOINTS];
// if a leaf, we're done
- if (node->contents)
+ if (!node->plane)
return;
plane = node->plane;
// create the new portal by generating a polygon for the node plane,
// and clipping it by all of the other portals(which came from nodes above this one)
nodeportal = AllocPortal();
- nodeportal->plane = *node->plane;
+ nodeportal->plane = *plane;
- nodeportalwinding = BaseWindingForPlane(node->plane);
+ PolygonD_QuadForPlane(nodeportal->points, nodeportal->plane.normal[0], nodeportal->plane.normal[1], nodeportal->plane.normal[2], nodeportal->plane.dist, 1024.0*1024.0*1024.0);
+ nodeportal->numpoints = 4;
side = 0; // shut up compiler warning
for (portal = (portal_t *)node->portals;portal;portal = portal->next[side])
{
else
Host_Error("Mod_Q1BSP_RecursiveNodePortals: mislinked portal");
- nodeportalwinding = ClipWinding(nodeportalwinding, &clipplane, true);
- if (!nodeportalwinding)
- {
- Con_Printf("Mod_Q1BSP_RecursiveNodePortals: WARNING: new portal was clipped away\n");
+ for (i = 0;i < nodeportal->numpoints*3;i++)
+ frontpoints[i] = nodeportal->points[i];
+ PolygonD_Divide(nodeportal->numpoints, frontpoints, clipplane.normal[0], clipplane.normal[1], clipplane.normal[2], clipplane.dist, 1.0/32.0, MAX_PORTALPOINTS, nodeportal->points, &nodeportal->numpoints, 0, NULL, NULL);
+ if (nodeportal->numpoints <= 0 || nodeportal->numpoints >= MAX_PORTALPOINTS)
break;
- }
}
- if (nodeportalwinding)
+ if (nodeportal->numpoints < 3)
+ {
+ Con_Print("Mod_Q1BSP_RecursiveNodePortals: WARNING: new portal was clipped away\n");
+ nodeportal->numpoints = 0;
+ }
+ else if (nodeportal->numpoints >= MAX_PORTALPOINTS)
{
- // if the plane was not clipped on all sides, there was an error
- nodeportal->winding = nodeportalwinding;
- AddPortalToNodes(nodeportal, front, back);
+ Con_Print("Mod_Q1BSP_RecursiveNodePortals: WARNING: new portal has too many points\n");
+ nodeportal->numpoints = 0;
}
+ AddPortalToNodes(nodeportal, front, back);
+
// split the portals of this node along this node's plane and assign them to the children of this node
// (migrating the portals downward through the tree)
for (portal = (portal_t *)node->portals;portal;portal = nextportal)
else
Host_Error("Mod_Q1BSP_RecursiveNodePortals: mislinked portal");
nextportal = portal->next[side];
+ if (!portal->numpoints)
+ continue;
other_node = portal->nodes[!side];
RemovePortalFromNodes(portal);
// cut the portal into two portals, one on each side of the node plane
- DivideWinding(portal->winding, plane, &frontwinding, &backwinding);
+ PolygonD_Divide(portal->numpoints, portal->points, plane->normal[0], plane->normal[1], plane->normal[2], plane->dist, 1.0/32.0, MAX_PORTALPOINTS, frontpoints, &numfrontpoints, MAX_PORTALPOINTS, backpoints, &numbackpoints);
- if (!frontwinding)
+ if (!numfrontpoints)
{
if (side == 0)
AddPortalToNodes(portal, back, other_node);
AddPortalToNodes(portal, other_node, back);
continue;
}
- if (!backwinding)
+ if (!numbackpoints)
{
if (side == 0)
AddPortalToNodes(portal, front, other_node);
continue;
}
- // the winding is split
+ // the portal is split
splitportal = AllocPortal();
temp = splitportal->chain;
*splitportal = *portal;
splitportal->chain = temp;
- splitportal->winding = backwinding;
- FreeWinding(portal->winding);
- portal->winding = frontwinding;
+ for (i = 0;i < numbackpoints*3;i++)
+ splitportal->points[i] = backpoints[i];
+ splitportal->numpoints = numbackpoints;
+ for (i = 0;i < numfrontpoints*3;i++)
+ portal->points[i] = frontpoints[i];
+ portal->numpoints = numfrontpoints;
if (side == 0)
{
Mod_Q1BSP_RecursiveNodePortals(back);
}
-
static void Mod_Q1BSP_MakePortals(void)
{
portalchain = NULL;
- Mod_Q1BSP_RecursiveNodePortals(loadmodel->brushq1.nodes);
+ Mod_Q1BSP_RecursiveNodePortals(loadmodel->brush.data_nodes);
Mod_Q1BSP_FinalizePortals();
}
-static void Mod_Q1BSP_BuildSurfaceNeighbors(msurface_t *surfaces, int numsurfaces, mempool_t *mempool)
-{
-#if 0
- int surfnum, vertnum, vertnum2, snum, vnum, vnum2;
- msurface_t *surf, *s;
- float *v0, *v1, *v2, *v3;
- for (surf = surfaces, surfnum = 0;surfnum < numsurfaces;surf++, surfnum++)
- surf->neighborsurfaces = Mem_Alloc(mempool, surf->poly_numverts * sizeof(msurface_t *));
- for (surf = surfaces, surfnum = 0;surfnum < numsurfaces;surf++, surfnum++)
- {
- for (vertnum = surf->poly_numverts - 1, vertnum2 = 0, v0 = surf->poly_verts + (surf->poly_numverts - 1) * 3, v1 = surf->poly_verts;vertnum2 < surf->poly_numverts;vertnum = vertnum2, vertnum2++, v0 = v1, v1 += 3)
- {
- if (surf->neighborsurfaces[vertnum])
- continue;
- surf->neighborsurfaces[vertnum] = NULL;
- for (s = surfaces, snum = 0;snum < numsurfaces;s++, snum++)
- {
- if (s->poly_mins[0] > (surf->poly_maxs[0] + 1) || s->poly_maxs[0] < (surf->poly_mins[0] - 1)
- || s->poly_mins[1] > (surf->poly_maxs[1] + 1) || s->poly_maxs[1] < (surf->poly_mins[1] - 1)
- || s->poly_mins[2] > (surf->poly_maxs[2] + 1) || s->poly_maxs[2] < (surf->poly_mins[2] - 1)
- || s == surf)
- continue;
- for (vnum = 0;vnum < s->poly_numverts;vnum++)
- if (s->neighborsurfaces[vnum] == surf)
- break;
- if (vnum < s->poly_numverts)
- continue;
- for (vnum = s->poly_numverts - 1, vnum2 = 0, v2 = s->poly_verts + (s->poly_numverts - 1) * 3, v3 = s->poly_verts;vnum2 < s->poly_numverts;vnum = vnum2, vnum2++, v2 = v3, v3 += 3)
- {
- if (s->neighborsurfaces[vnum] == NULL
- && ((v0[0] == v2[0] && v0[1] == v2[1] && v0[2] == v2[2] && v1[0] == v3[0] && v1[1] == v3[1] && v1[2] == v3[2])
- || (v1[0] == v2[0] && v1[1] == v2[1] && v1[2] == v2[2] && v0[0] == v3[0] && v0[1] == v3[1] && v0[2] == v3[2])))
- {
- surf->neighborsurfaces[vertnum] = s;
- s->neighborsurfaces[vnum] = surf;
- break;
- }
- }
- if (vnum < s->poly_numverts)
- break;
- }
- }
- }
-#endif
-}
-
static void Mod_Q1BSP_BuildLightmapUpdateChains(mempool_t *mempool, model_t *model)
{
int i, j, stylecounts[256], totalcount, remapstyles[256];
- msurface_t *surf;
+ msurface_t *surface;
memset(stylecounts, 0, sizeof(stylecounts));
- for (i = 0;i < model->brushq1.nummodelsurfaces;i++)
+ for (i = 0;i < model->nummodelsurfaces;i++)
{
- surf = model->brushq1.surfaces + model->brushq1.firstmodelsurface + i;
+ surface = model->data_surfaces + model->firstmodelsurface + i;
for (j = 0;j < MAXLIGHTMAPS;j++)
- stylecounts[surf->styles[j]]++;
+ stylecounts[surface->lightmapinfo->styles[j]]++;
}
totalcount = 0;
model->brushq1.light_styles = 0;
model->brushq1.light_styleupdatechains[i] = model->brushq1.light_styleupdatechainsbuffer + j;
j += stylecounts[model->brushq1.light_style[i]] + 1;
}
- for (i = 0;i < model->brushq1.nummodelsurfaces;i++)
+ for (i = 0;i < model->nummodelsurfaces;i++)
{
- surf = model->brushq1.surfaces + model->brushq1.firstmodelsurface + i;
+ surface = model->data_surfaces + model->firstmodelsurface + i;
for (j = 0;j < MAXLIGHTMAPS;j++)
- if (surf->styles[j] != 255)
- *model->brushq1.light_styleupdatechains[remapstyles[surf->styles[j]]]++ = surf;
+ if (surface->lightmapinfo->styles[j] != 255)
+ *model->brushq1.light_styleupdatechains[remapstyles[surface->lightmapinfo->styles[j]]]++ = surface;
}
j = 0;
for (i = 0;i < model->brushq1.light_styles;i++)
}
}
-static void Mod_Q1BSP_BuildPVSTextureChains(model_t *model)
+//Returns PVS data for a given point
+//(note: can return NULL)
+static qbyte *Mod_Q1BSP_GetPVS(model_t *model, const vec3_t p)
{
- int i, j;
- for (i = 0;i < model->brushq1.numtextures;i++)
- model->brushq1.pvstexturechainslength[i] = 0;
- for (i = 0, j = model->brushq1.firstmodelsurface;i < model->brushq1.nummodelsurfaces;i++, j++)
+ mnode_t *node;
+ Mod_CheckLoaded(model);
+ node = model->brush.data_nodes;
+ while (node->plane)
+ node = node->children[(node->plane->type < 3 ? p[node->plane->type] : DotProduct(p,node->plane->normal)) < node->plane->dist];
+ if (((mleaf_t *)node)->clusterindex >= 0)
+ return model->brush.data_pvsclusters + ((mleaf_t *)node)->clusterindex * model->brush.num_pvsclusterbytes;
+ else
+ return NULL;
+}
+
+static void Mod_Q1BSP_FatPVS_RecursiveBSPNode(model_t *model, const vec3_t org, vec_t radius, qbyte *pvsbuffer, int pvsbytes, mnode_t *node)
+{
+ while (node->plane)
{
- if (model->brushq1.surfacepvsframes[j] == model->brushq1.pvsframecount)
+ float d = PlaneDiff(org, node->plane);
+ if (d > radius)
+ node = node->children[0];
+ else if (d < -radius)
+ node = node->children[1];
+ else
{
- model->brushq1.pvssurflist[model->brushq1.pvssurflistlength++] = j;
- model->brushq1.pvstexturechainslength[model->brushq1.surfaces[j].texinfo->texture->number]++;
+ // go down both sides
+ Mod_Q1BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, pvsbytes, node->children[0]);
+ node = node->children[1];
}
}
- for (i = 0, j = 0;i < model->brushq1.numtextures;i++)
+ // if this leaf is in a cluster, accumulate the pvs bits
+ if (((mleaf_t *)node)->clusterindex >= 0)
{
- if (model->brushq1.pvstexturechainslength[i])
- {
- model->brushq1.pvstexturechains[i] = model->brushq1.pvstexturechainsbuffer + j;
- j += model->brushq1.pvstexturechainslength[i] + 1;
- }
- else
- model->brushq1.pvstexturechains[i] = NULL;
+ int i;
+ qbyte *pvs = model->brush.data_pvsclusters + ((mleaf_t *)node)->clusterindex * model->brush.num_pvsclusterbytes;
+ for (i = 0;i < pvsbytes;i++)
+ pvsbuffer[i] |= pvs[i];
}
- for (i = 0, j = model->brushq1.firstmodelsurface;i < model->brushq1.nummodelsurfaces;i++, j++)
- if (model->brushq1.surfacepvsframes[j] == model->brushq1.pvsframecount)
- *model->brushq1.pvstexturechains[model->brushq1.surfaces[j].texinfo->texture->number]++ = model->brushq1.surfaces + j;
- for (i = 0;i < model->brushq1.numtextures;i++)
+}
+
+//Calculates a PVS that is the inclusive or of all leafs within radius pixels
+//of the given point.
+static int Mod_Q1BSP_FatPVS(model_t *model, const vec3_t org, vec_t radius, qbyte *pvsbuffer, int pvsbufferlength)
+{
+ int bytes = model->brush.num_pvsclusterbytes;
+ bytes = min(bytes, pvsbufferlength);
+ if (r_novis.integer || !model->brush.num_pvsclusters || !Mod_Q1BSP_GetPVS(model, org))
{
- if (model->brushq1.pvstexturechainslength[i])
+ memset(pvsbuffer, 0xFF, bytes);
+ return bytes;
+ }
+ memset(pvsbuffer, 0, bytes);
+ Mod_Q1BSP_FatPVS_RecursiveBSPNode(model, org, radius, pvsbuffer, bytes, model->brush.data_nodes);
+ return bytes;
+}
+
+static void Mod_Q1BSP_RoundUpToHullSize(model_t *cmodel, const vec3_t inmins, const vec3_t inmaxs, vec3_t outmins, vec3_t outmaxs)
+{
+ vec3_t size;
+ const hull_t *hull;
+
+ VectorSubtract(inmaxs, inmins, size);
+ if (cmodel->brush.ishlbsp)
+ {
+ if (size[0] < 3)
+ hull = &cmodel->brushq1.hulls[0]; // 0x0x0
+ else if (size[0] <= 32)
{
- *model->brushq1.pvstexturechains[i] = NULL;
- model->brushq1.pvstexturechains[i] -= model->brushq1.pvstexturechainslength[i];
+ if (size[2] < 54) // pick the nearest of 36 or 72
+ hull = &cmodel->brushq1.hulls[3]; // 32x32x36
+ else
+ hull = &cmodel->brushq1.hulls[1]; // 32x32x72
}
+ else
+ hull = &cmodel->brushq1.hulls[2]; // 64x64x64
}
+ else
+ {
+ if (size[0] < 3)
+ hull = &cmodel->brushq1.hulls[0]; // 0x0x0
+ else if (size[0] <= 32)
+ hull = &cmodel->brushq1.hulls[1]; // 32x32x56
+ else
+ hull = &cmodel->brushq1.hulls[2]; // 64x64x88
+ }
+ VectorCopy(inmins, outmins);
+ VectorAdd(inmins, hull->clip_size, outmaxs);
}
-extern void R_Model_Brush_DrawSky(entity_render_t *ent);
-extern void R_Model_Brush_Draw(entity_render_t *ent);
-extern void R_Model_Brush_DrawShadowVolume(entity_render_t *ent, vec3_t relativelightorigin, float lightradius);
-extern void R_Model_Brush_DrawLight(entity_render_t *ent, vec3_t relativelightorigin, vec3_t relativeeyeorigin, float lightradius, float *lightcolor, const matrix4x4_t *matrix_modeltofilter, const matrix4x4_t *matrix_modeltoattenuationxyz, const matrix4x4_t *matrix_modeltoattenuationz);
+extern void R_Q1BSP_DrawSky(entity_render_t *ent);
+extern void R_Q1BSP_Draw(entity_render_t *ent);
+extern void R_Q1BSP_GetLightInfo(entity_render_t *ent, vec3_t relativelightorigin, float lightradius, vec3_t outmins, vec3_t outmaxs, int *outleaflist, qbyte *outleafpvs, int *outnumleafspointer, int *outsurfacelist, qbyte *outsurfacepvs, int *outnumsurfacespointer);
+extern void R_Q1BSP_DrawShadowVolume(entity_render_t *ent, vec3_t relativelightorigin, float lightradius, int numsurfaces, const int *surfacelist, const vec3_t lightmins, const vec3_t lightmaxs);
+extern void R_Q1BSP_DrawLight(entity_render_t *ent, float *lightcolor, int numsurfaces, const int *surfacelist);
void Mod_Q1BSP_Load(model_t *mod, void *buffer)
{
int i, j, k;
dheader_t *header;
dmodel_t *bm;
mempool_t *mainmempool;
- char *loadname;
- model_t *originalloadmodel;
float dist, modelyawradius, modelradius, *vec;
- msurface_t *surf;
- surfmesh_t *mesh;
+ msurface_t *surface;
+ int numshadowmeshtriangles;
- mod->type = mod_brush;
+ mod->type = mod_brushq1;
header = (dheader_t *)buffer;
i = LittleLong(header->version);
if (i != BSPVERSION && i != 30)
Host_Error("Mod_Q1BSP_Load: %s has wrong version number(%i should be %i(Quake) or 30(HalfLife))", mod->name, i, BSPVERSION);
- mod->brushq1.ishlbsp = i == 30;
-
- mod->brushq1.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
- mod->brushq1.PointInLeaf = Mod_Q1BSP_PointInLeaf;
- mod->brushq1.PointContents = Mod_Q1BSP_PointContents;
- mod->brushq1.LeafPVS = Mod_Q1BSP_LeafPVS;
- mod->brushq1.BuildPVSTextureChains = Mod_Q1BSP_BuildPVSTextureChains;
+ mod->brush.ishlbsp = i == 30;
+
+ mod->soundfromcenter = true;
+ mod->TraceBox = Mod_Q1BSP_TraceBox;
+ mod->brush.SuperContentsFromNativeContents = Mod_Q1BSP_SuperContentsFromNativeContents;
+ mod->brush.NativeContentsFromSuperContents = Mod_Q1BSP_NativeContentsFromSuperContents;
+ mod->brush.GetPVS = Mod_Q1BSP_GetPVS;
+ mod->brush.FatPVS = Mod_Q1BSP_FatPVS;
+ mod->brush.BoxTouchingPVS = Mod_Q1BSP_BoxTouchingPVS;
+ mod->brush.BoxTouchingLeafPVS = Mod_Q1BSP_BoxTouchingLeafPVS;
+ mod->brush.BoxTouchingVisibleLeafs = Mod_Q1BSP_BoxTouchingVisibleLeafs;
+ mod->brush.LightPoint = Mod_Q1BSP_LightPoint;
+ mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.AmbientSoundLevelsForPoint = Mod_Q1BSP_AmbientSoundLevelsForPoint;
+ mod->brush.RoundUpToHullSize = Mod_Q1BSP_RoundUpToHullSize;
+ mod->brush.PointInLeaf = Mod_Q1BSP_PointInLeaf;
if (loadmodel->isworldmodel)
- {
- Cvar_SetValue("halflifebsp", mod->brushq1.ishlbsp);
- // until we get a texture for it...
- R_ResetQuakeSky();
- }
+ Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
// swap all the lumps
mod_base = (qbyte *)header;
- for (i = 0;i < (int) sizeof(dheader_t) / 4;i++)
- ((int *)header)[i] = LittleLong(((int *)header)[i]);
+ header->version = LittleLong(header->version);
+ for (i = 0;i < HEADER_LUMPS;i++)
+ {
+ header->lumps[i].fileofs = LittleLong(header->lumps[i].fileofs);
+ header->lumps[i].filelen = LittleLong(header->lumps[i].filelen);
+ }
// load into heap
Mod_Q1BSP_LoadPlanes(&header->lumps[LUMP_PLANES]);
Mod_Q1BSP_LoadTexinfo(&header->lumps[LUMP_TEXINFO]);
Mod_Q1BSP_LoadFaces(&header->lumps[LUMP_FACES]);
- Mod_Q1BSP_LoadMarksurfaces(&header->lumps[LUMP_MARKSURFACES]);
+ Mod_Q1BSP_LoadLeaffaces(&header->lumps[LUMP_MARKSURFACES]);
Mod_Q1BSP_LoadVisibility(&header->lumps[LUMP_VISIBILITY]);
+ // load submodels before leafs because they contain the number of vis leafs
+ Mod_Q1BSP_LoadSubmodels(&header->lumps[LUMP_MODELS]);
Mod_Q1BSP_LoadLeafs(&header->lumps[LUMP_LEAFS]);
Mod_Q1BSP_LoadNodes(&header->lumps[LUMP_NODES]);
Mod_Q1BSP_LoadClipnodes(&header->lumps[LUMP_CLIPNODES]);
- Mod_Q1BSP_LoadSubmodels(&header->lumps[LUMP_MODELS]);
+
+ if (!mod->brushq1.lightdata)
+ mod->brush.LightPoint = NULL;
+
+ if (mod->brushq1.data_compressedpvs)
+ Mem_Free(mod->brushq1.data_compressedpvs);
+ mod->brushq1.data_compressedpvs = NULL;
+ mod->brushq1.num_compressedpvs = 0;
Mod_Q1BSP_MakeHull0();
Mod_Q1BSP_MakePortals();
mod->numframes = 2; // regular and alternate animation
+ mod->numskins = 1;
mainmempool = mod->mempool;
- loadname = mod->name;
Mod_Q1BSP_LoadLightList();
- originalloadmodel = loadmodel;
-//
-// set up the submodels(FIXME: this is confusing)
-//
- for (i = 0;i < mod->brushq1.numsubmodels;i++)
+ // make a single combined shadow mesh to allow optimized shadow volume creation
+ numshadowmeshtriangles = 0;
+ for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ {
+ surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
+ numshadowmeshtriangles += surface->num_triangles;
+ }
+ loadmodel->brush.shadowmesh = Mod_ShadowMesh_Begin(loadmodel->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
+ for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ Mod_ShadowMesh_AddMesh(loadmodel->mempool, loadmodel->brush.shadowmesh, NULL, NULL, NULL, surface->groupmesh->data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle));
+ loadmodel->brush.shadowmesh = Mod_ShadowMesh_Finish(loadmodel->mempool, loadmodel->brush.shadowmesh, false, true);
+ Mod_BuildTriangleNeighbors(loadmodel->brush.shadowmesh->neighbor3i, loadmodel->brush.shadowmesh->element3i, loadmodel->brush.shadowmesh->numtriangles);
+
+ if (loadmodel->brush.numsubmodels)
+ loadmodel->brush.submodels = Mem_Alloc(loadmodel->mempool, loadmodel->brush.numsubmodels * sizeof(model_t *));
+
+ if (loadmodel->isworldmodel)
+ {
+ // clear out any stale submodels or worldmodels lying around
+ // if we did this clear before now, an error might abort loading and
+ // leave things in a bad state
+ Mod_RemoveStaleWorldModels(loadmodel);
+ }
+
+ // LordHavoc: to clear the fog around the original quake submodel code, I
+ // will explain:
+ // first of all, some background info on the submodels:
+ // model 0 is the map model (the world, named maps/e1m1.bsp for example)
+ // model 1 and higher are submodels (doors and the like, named *1, *2, etc)
+ // now the weird for loop itself:
+ // the loop functions in an odd way, on each iteration it sets up the
+ // current 'mod' model (which despite the confusing code IS the model of
+ // the number i), at the end of the loop it duplicates the model to become
+ // the next submodel, and loops back to set up the new submodel.
+
+ // LordHavoc: now the explanation of my sane way (which works identically):
+ // set up the world model, then on each submodel copy from the world model
+ // and set up the submodel with the respective model info.
+ for (i = 0;i < mod->brush.numsubmodels;i++)
{
+ // LordHavoc: this code was originally at the end of this loop, but
+ // has been transformed to something more readable at the start here.
+
+ if (i > 0)
+ {
+ char name[10];
+ // LordHavoc: only register submodels if it is the world
+ // (prevents external bsp models from replacing world submodels with
+ // their own)
+ if (!loadmodel->isworldmodel)
+ continue;
+ // duplicate the basic information
+ sprintf(name, "*%i", i);
+ mod = Mod_FindName(name);
+ // copy the base model to this one
+ *mod = *loadmodel;
+ // rename the clone back to its proper name
+ strcpy(mod->name, name);
+ // textures and memory belong to the main model
+ mod->texturepool = NULL;
+ mod->mempool = NULL;
+ }
+
+ mod->brush.submodel = i;
+
+ if (loadmodel->brush.submodels)
+ loadmodel->brush.submodels[i] = mod;
+
bm = &mod->brushq1.submodels[i];
mod->brushq1.hulls[0].firstclipnode = bm->headnode[0];
mod->brushq1.hulls[j].lastclipnode = mod->brushq1.numclipnodes - 1;
}
- mod->brushq1.firstmodelsurface = bm->firstface;
- mod->brushq1.nummodelsurfaces = bm->numfaces;
+ mod->firstmodelsurface = bm->firstface;
+ mod->nummodelsurfaces = bm->numfaces;
+
+ // make the model surface list (used by shadowing/lighting)
+ mod->surfacelist = Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->surfacelist));
+ for (j = 0;j < mod->nummodelsurfaces;j++)
+ mod->surfacelist[j] = mod->firstmodelsurface + j;
// this gets altered below if sky is used
mod->DrawSky = NULL;
- mod->Draw = R_Model_Brush_Draw;
- mod->DrawFakeShadow = NULL;
- mod->DrawShadowVolume = R_Model_Brush_DrawShadowVolume;
- mod->DrawLight = R_Model_Brush_DrawLight;
- mod->brushq1.pvstexturechains = Mem_Alloc(originalloadmodel->mempool, mod->brushq1.numtextures * sizeof(msurface_t **));
- mod->brushq1.pvstexturechainsbuffer = Mem_Alloc(originalloadmodel->mempool,(mod->brushq1.nummodelsurfaces + mod->brushq1.numtextures) * sizeof(msurface_t *));
- mod->brushq1.pvstexturechainslength = Mem_Alloc(originalloadmodel->mempool, mod->brushq1.numtextures * sizeof(int));
- Mod_Q1BSP_BuildPVSTextureChains(mod);
- Mod_Q1BSP_BuildLightmapUpdateChains(originalloadmodel->mempool, mod);
- if (mod->brushq1.nummodelsurfaces)
+ mod->Draw = R_Q1BSP_Draw;
+ mod->GetLightInfo = R_Q1BSP_GetLightInfo;
+ mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
+ mod->DrawLight = R_Q1BSP_DrawLight;
+ if (i != 0)
+ {
+ mod->brush.GetPVS = NULL;
+ mod->brush.FatPVS = NULL;
+ mod->brush.BoxTouchingPVS = NULL;
+ mod->brush.BoxTouchingLeafPVS = NULL;
+ mod->brush.BoxTouchingVisibleLeafs = NULL;
+ mod->brush.LightPoint = NULL;
+ mod->brush.AmbientSoundLevelsForPoint = NULL;
+ }
+ Mod_Q1BSP_BuildLightmapUpdateChains(loadmodel->mempool, mod);
+ if (mod->nummodelsurfaces)
{
// LordHavoc: calculate bmodel bounding box rather than trusting what it says
mod->normalmins[0] = mod->normalmins[1] = mod->normalmins[2] = 1000000000.0f;
mod->normalmaxs[0] = mod->normalmaxs[1] = mod->normalmaxs[2] = -1000000000.0f;
modelyawradius = 0;
modelradius = 0;
- for (j = 0, surf = &mod->brushq1.surfaces[mod->brushq1.firstmodelsurface];j < mod->brushq1.nummodelsurfaces;j++, surf++)
+ for (j = 0, surface = &mod->data_surfaces[mod->firstmodelsurface];j < mod->nummodelsurfaces;j++, surface++)
{
// we only need to have a drawsky function if it is used(usually only on world model)
- if (surf->texinfo->texture->shader == &Cshader_sky)
- mod->DrawSky = R_Model_Brush_DrawSky;
- // LordHavoc: submodels always clip, even if water
- if (mod->brushq1.numsubmodels - 1)
- surf->flags |= SURF_SOLIDCLIP;
+ if (surface->texture->basematerialflags & MATERIALFLAG_SKY)
+ mod->DrawSky = R_Q1BSP_DrawSky;
// calculate bounding shapes
- for (mesh = surf->mesh;mesh;mesh = mesh->chain)
+ for (k = 0, vec = (surface->groupmesh->data_vertex3f + 3 * surface->num_firstvertex);k < surface->num_vertices;k++, vec += 3)
{
- for (k = 0, vec = mesh->vertex3f;k < mesh->numverts;k++, vec += 3)
- {
- if (mod->normalmins[0] > vec[0]) mod->normalmins[0] = vec[0];
- if (mod->normalmins[1] > vec[1]) mod->normalmins[1] = vec[1];
- if (mod->normalmins[2] > vec[2]) mod->normalmins[2] = vec[2];
- if (mod->normalmaxs[0] < vec[0]) mod->normalmaxs[0] = vec[0];
- if (mod->normalmaxs[1] < vec[1]) mod->normalmaxs[1] = vec[1];
- if (mod->normalmaxs[2] < vec[2]) mod->normalmaxs[2] = vec[2];
- dist = vec[0]*vec[0]+vec[1]*vec[1];
- if (modelyawradius < dist)
- modelyawradius = dist;
- dist += vec[2]*vec[2];
- if (modelradius < dist)
- modelradius = dist;
- }
+ if (mod->normalmins[0] > vec[0]) mod->normalmins[0] = vec[0];
+ if (mod->normalmins[1] > vec[1]) mod->normalmins[1] = vec[1];
+ if (mod->normalmins[2] > vec[2]) mod->normalmins[2] = vec[2];
+ if (mod->normalmaxs[0] < vec[0]) mod->normalmaxs[0] = vec[0];
+ if (mod->normalmaxs[1] < vec[1]) mod->normalmaxs[1] = vec[1];
+ if (mod->normalmaxs[2] < vec[2]) mod->normalmaxs[2] = vec[2];
+ dist = vec[0]*vec[0]+vec[1]*vec[1];
+ if (modelyawradius < dist)
+ modelyawradius = dist;
+ dist += vec[2]*vec[2];
+ if (modelradius < dist)
+ modelradius = dist;
}
}
modelyawradius = sqrt(modelyawradius);
else
{
// LordHavoc: empty submodel(lacrima.bsp has such a glitch)
- Con_Printf("warning: empty submodel *%i in %s\n", i+1, loadname);
- }
- Mod_Q1BSP_BuildSurfaceNeighbors(mod->brushq1.surfaces + mod->brushq1.firstmodelsurface, mod->brushq1.nummodelsurfaces, originalloadmodel->mempool);
-
- mod->brushq1.numleafs = bm->visleafs;
-
- // LordHavoc: only register submodels if it is the world
- // (prevents bsp models from replacing world submodels)
- if (loadmodel->isworldmodel && i < (mod->brushq1.numsubmodels - 1))
- {
- char name[10];
- // duplicate the basic information
- sprintf(name, "*%i", i+1);
- loadmodel = Mod_FindName(name);
- *loadmodel = *mod;
- strcpy(loadmodel->name, name);
- // textures and memory belong to the main model
- loadmodel->texturepool = NULL;
- loadmodel->mempool = NULL;
- mod = loadmodel;
+ Con_Printf("warning: empty submodel *%i in %s\n", i+1, loadmodel->name);
}
+ //mod->brushq1.num_visleafs = bm->visleafs;
}
- loadmodel = originalloadmodel;
+ Mod_Q1BSP_LoadMapBrushes();
+
//Mod_Q1BSP_ProcessLightList();
+
+ if (developer.integer)
+ Con_Printf("Some stats for q1bsp model \"%s\": %i faces, %i nodes, %i leafs, %i visleafs, %i visleafportals\n", loadmodel->name, loadmodel->num_surfaces, loadmodel->brush.num_nodes, loadmodel->brush.num_leafs, mod->brush.num_pvsclusters, loadmodel->brush.num_portals);
}
static void Mod_Q2BSP_LoadEntities(lump_t *l)
*/
}
-void Mod_Q2BSP_Load(model_t *mod, void *buffer)
+void static Mod_Q2BSP_Load(model_t *mod, void *buffer)
{
int i;
q2dheader_t *header;
i = LittleLong(header->version);
if (i != Q2BSPVERSION)
Host_Error("Mod_Q2BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q2BSPVERSION);
- mod->brushq1.ishlbsp = false;
+ mod->brush.ishlbsp = false;
if (loadmodel->isworldmodel)
- {
- Cvar_SetValue("halflifebsp", mod->brushq1.ishlbsp);
- // until we get a texture for it...
- R_ResetQuakeSky();
- }
+ Cvar_SetValue("halflifebsp", mod->brush.ishlbsp);
mod_base = (qbyte *)header;
Mod_Q2BSP_LoadModels(&header->lumps[Q2LUMP_MODELS]);
}
+static int Mod_Q3BSP_SuperContentsFromNativeContents(model_t *model, int nativecontents);
+static int Mod_Q3BSP_NativeContentsFromSuperContents(model_t *model, int supercontents);
static void Mod_Q3BSP_LoadEntities(lump_t *l)
{
memcpy(loadmodel->brush.entities, mod_base + l->fileofs, l->filelen);
data = loadmodel->brush.entities;
// some Q3 maps override the lightgrid_cellsize with a worldspawn key
- if (data && COM_ParseToken(&data) && com_token[0] == '{')
+ if (data && COM_ParseToken(&data, false) && com_token[0] == '{')
{
while (1)
{
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
break; // error
if (com_token[0] == '}')
break; // end of worldspawn
strcpy(key, com_token);
while (key[strlen(key)-1] == ' ') // remove trailing spaces
key[strlen(key)-1] = 0;
- if (!COM_ParseToken(&data))
+ if (!COM_ParseToken(&data, false))
break; // error
strcpy(value, com_token);
if (!strcmp("gridsize", key))
static void Mod_Q3BSP_LoadTextures(lump_t *l)
{
q3dtexture_t *in;
- q3mtexture_t *out;
+ texture_t *out;
int i, count;
+ int j, c;
+ fssearch_t *search;
+ char *f;
+ const char *text;
+ int flags, flags2, numparameters, passnumber;
+ char shadername[Q3PATHLENGTH];
+ char sky[Q3PATHLENGTH];
+ char firstpasstexturename[Q3PATHLENGTH];
+ char parameter[4][Q3PATHLENGTH];
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_textures = out;
- loadmodel->brushq3.num_textures = count;
+ loadmodel->data_textures = out;
+ loadmodel->num_textures = count;
for (i = 0;i < count;i++, in++, out++)
{
- strncpy(out->name, in->name, sizeof(out->name) - 1);
+ strlcpy (out->name, in->name, sizeof (out->name));
out->surfaceflags = LittleLong(in->surfaceflags);
- out->contents = LittleLong(in->contents);
+ out->supercontents = Mod_Q3BSP_SuperContentsFromNativeContents(loadmodel, LittleLong(in->contents));
+ out->surfaceparms = -1;
+ }
+
+ // do a quick parse of shader files to get surfaceparms
+ if ((search = FS_Search("scripts/*.shader", true, false)))
+ {
+ for (i = 0;i < search->numfilenames;i++)
+ {
+ if ((f = FS_LoadFile(search->filenames[i], tempmempool, false)))
+ {
+ text = f;
+ while (COM_ParseToken(&text, false))
+ {
+ strlcpy (shadername, com_token, sizeof (shadername));
+ flags = 0;
+ flags2 = 0;
+ sky[0] = 0;
+ passnumber = 0;
+ firstpasstexturename[0] = 0;
+ if (COM_ParseToken(&text, false) && !strcasecmp(com_token, "{"))
+ {
+ while (COM_ParseToken(&text, false))
+ {
+ if (!strcasecmp(com_token, "}"))
+ break;
+ else if (!strcasecmp(com_token, "{"))
+ {
+ while (COM_ParseToken(&text, false))
+ {
+ if (!strcasecmp(com_token, "}"))
+ break;
+ if (!strcasecmp(com_token, "\n"))
+ continue;
+ numparameters = 0;
+ for (j = 0;strcasecmp(com_token, "\n") && strcasecmp(com_token, "}");j++)
+ {
+ if (j < 4)
+ {
+ strlcpy(parameter[j], com_token, sizeof(parameter[j]));
+ numparameters = j + 1;
+ }
+ if (!COM_ParseToken(&text, true))
+ break;
+ }
+ if (developer.integer >= 2)
+ {
+ Con_Printf("%s %i: ", shadername, passnumber);
+ for (j = 0;j < numparameters;j++)
+ Con_Printf(" %s", parameter[j]);
+ Con_Print("\n");
+ }
+ if (passnumber == 0 && numparameters >= 1)
+ {
+ if (!strcasecmp(parameter[0], "blendfunc") && (flags & Q3SURFACEPARM_TRANS))
+ {
+ if (numparameters == 2 && !strcasecmp(parameter[1], "add"))
+ flags2 |= Q3TEXTUREFLAG_ADDITIVE;
+ else if (numparameters == 3 && !strcasecmp(parameter[1], "gl_one") && !strcasecmp(parameter[2], "gl_one"))
+ flags2 |= Q3TEXTUREFLAG_ADDITIVE;
+ else if (numparameters == 3 && !strcasecmp(parameter[1], "gl_src_alpha") && !strcasecmp(parameter[2], "gl_one"))
+ flags2 |= Q3TEXTUREFLAG_ADDITIVE;
+ }
+ else if (numparameters >= 2 && (!strcasecmp(parameter[0], "map") || !strcasecmp(parameter[0], "clampmap")))
+ strlcpy(firstpasstexturename, parameter[1], sizeof(firstpasstexturename));
+ else if (numparameters >= 3 && !strcasecmp(parameter[0], "animmap"))
+ strlcpy(firstpasstexturename, parameter[2], sizeof(firstpasstexturename));
+ else if (numparameters >= 2 && !strcasecmp(parameter[0], "alphafunc"))
+ flags2 |= Q3TEXTUREFLAG_ALPHATEST;
+ }
+ // break out a level if it was }
+ if (!strcasecmp(com_token, "}"))
+ break;
+ }
+ passnumber++;
+ continue;
+ }
+ numparameters = 0;
+ for (j = 0;strcasecmp(com_token, "\n") && strcasecmp(com_token, "}");j++)
+ {
+ if (j < 4)
+ {
+ strlcpy(parameter[j], com_token, sizeof(parameter[j]));
+ numparameters = j + 1;
+ }
+ if (!COM_ParseToken(&text, true))
+ break;
+ }
+ if (i == 0 && !strcasecmp(com_token, "}"))
+ break;
+ if (developer.integer >= 2)
+ {
+ Con_Printf("%s: ", shadername);
+ for (j = 0;j < numparameters;j++)
+ Con_Printf(" %s", parameter[j]);
+ Con_Print("\n");
+ }
+ if (numparameters < 1)
+ continue;
+ if (!strcasecmp(parameter[0], "surfaceparm") && numparameters >= 2)
+ {
+ if (!strcasecmp(parameter[1], "alphashadow"))
+ flags |= Q3SURFACEPARM_ALPHASHADOW;
+ else if (!strcasecmp(parameter[1], "areaportal"))
+ flags |= Q3SURFACEPARM_AREAPORTAL;
+ else if (!strcasecmp(parameter[1], "clusterportal"))
+ flags |= Q3SURFACEPARM_CLUSTERPORTAL;
+ else if (!strcasecmp(parameter[1], "detail"))
+ flags |= Q3SURFACEPARM_DETAIL;
+ else if (!strcasecmp(parameter[1], "donotenter"))
+ flags |= Q3SURFACEPARM_DONOTENTER;
+ else if (!strcasecmp(parameter[1], "fog"))
+ flags |= Q3SURFACEPARM_FOG;
+ else if (!strcasecmp(parameter[1], "lava"))
+ flags |= Q3SURFACEPARM_LAVA;
+ else if (!strcasecmp(parameter[1], "lightfilter"))
+ flags |= Q3SURFACEPARM_LIGHTFILTER;
+ else if (!strcasecmp(parameter[1], "metalsteps"))
+ flags |= Q3SURFACEPARM_METALSTEPS;
+ else if (!strcasecmp(parameter[1], "nodamage"))
+ flags |= Q3SURFACEPARM_NODAMAGE;
+ else if (!strcasecmp(parameter[1], "nodlight"))
+ flags |= Q3SURFACEPARM_NODLIGHT;
+ else if (!strcasecmp(parameter[1], "nodraw"))
+ flags |= Q3SURFACEPARM_NODRAW;
+ else if (!strcasecmp(parameter[1], "nodrop"))
+ flags |= Q3SURFACEPARM_NODROP;
+ else if (!strcasecmp(parameter[1], "noimpact"))
+ flags |= Q3SURFACEPARM_NOIMPACT;
+ else if (!strcasecmp(parameter[1], "nolightmap"))
+ flags |= Q3SURFACEPARM_NOLIGHTMAP;
+ else if (!strcasecmp(parameter[1], "nomarks"))
+ flags |= Q3SURFACEPARM_NOMARKS;
+ else if (!strcasecmp(parameter[1], "nomipmaps"))
+ flags |= Q3SURFACEPARM_NOMIPMAPS;
+ else if (!strcasecmp(parameter[1], "nonsolid"))
+ flags |= Q3SURFACEPARM_NONSOLID;
+ else if (!strcasecmp(parameter[1], "origin"))
+ flags |= Q3SURFACEPARM_ORIGIN;
+ else if (!strcasecmp(parameter[1], "playerclip"))
+ flags |= Q3SURFACEPARM_PLAYERCLIP;
+ else if (!strcasecmp(parameter[1], "sky"))
+ flags |= Q3SURFACEPARM_SKY;
+ else if (!strcasecmp(parameter[1], "slick"))
+ flags |= Q3SURFACEPARM_SLICK;
+ else if (!strcasecmp(parameter[1], "slime"))
+ flags |= Q3SURFACEPARM_SLIME;
+ else if (!strcasecmp(parameter[1], "structural"))
+ flags |= Q3SURFACEPARM_STRUCTURAL;
+ else if (!strcasecmp(parameter[1], "trans"))
+ flags |= Q3SURFACEPARM_TRANS;
+ else if (!strcasecmp(parameter[1], "water"))
+ flags |= Q3SURFACEPARM_WATER;
+ else if (!strcasecmp(parameter[1], "pointlight"))
+ flags |= Q3SURFACEPARM_POINTLIGHT;
+ else
+ Con_Printf("%s parsing warning: unknown surfaceparm \"%s\"\n", search->filenames[i], parameter[1]);
+ }
+ else if (!strcasecmp(parameter[0], "sky") && numparameters >= 2)
+ strlcpy(sky, parameter[1], sizeof(sky));
+ else if (!strcasecmp(parameter[0], "skyparms") && numparameters >= 2)
+ {
+ if (!atoi(parameter[1]) && strcasecmp(parameter[1], "-"))
+ strlcpy(sky, parameter[1], sizeof(sky));
+ }
+ else if (!strcasecmp(parameter[0], "cull") && numparameters >= 2)
+ {
+ if (!strcasecmp(parameter[1], "disable") || !strcasecmp(parameter[1], "none") || !strcasecmp(parameter[1], "twosided"))
+ flags2 |= Q3TEXTUREFLAG_TWOSIDED;
+ }
+ else if (!strcasecmp(parameter[0], "nomipmaps"))
+ flags2 |= Q3TEXTUREFLAG_NOMIPMAPS;
+ else if (!strcasecmp(parameter[0], "nopicmip"))
+ flags2 |= Q3TEXTUREFLAG_NOPICMIP;
+ else if (!strcasecmp(parameter[0], "deformvertexes") && numparameters >= 2)
+ {
+ if (!strcasecmp(parameter[1], "autosprite") && numparameters == 2)
+ flags2 |= Q3TEXTUREFLAG_AUTOSPRITE;
+ if (!strcasecmp(parameter[1], "autosprite2") && numparameters == 2)
+ flags2 |= Q3TEXTUREFLAG_AUTOSPRITE2;
+ }
+ }
+ // add shader to list (shadername and flags)
+ // actually here we just poke into the texture settings
+ for (j = 0, out = loadmodel->data_textures;j < loadmodel->num_textures;j++, out++)
+ {
+ if (!strcasecmp(out->name, shadername))
+ {
+ out->surfaceparms = flags;
+ out->textureflags = flags2;
+ out->basematerialflags = 0;
+ if (out->surfaceparms & Q3SURFACEPARM_NODRAW)
+ out->basematerialflags |= MATERIALFLAG_NODRAW;
+ else if (out->surfaceparms & Q3SURFACEPARM_SKY)
+ out->basematerialflags |= MATERIALFLAG_SKY;
+ else if (out->surfaceparms & Q3SURFACEPARM_LAVA)
+ out->basematerialflags |= MATERIALFLAG_WATER | MATERIALFLAG_FULLBRIGHT;
+ else if (out->surfaceparms & Q3SURFACEPARM_SLIME)
+ out->basematerialflags |= MATERIALFLAG_WATER | MATERIALFLAG_WATERALPHA;
+ else if (out->surfaceparms & Q3SURFACEPARM_WATER)
+ out->basematerialflags |= MATERIALFLAG_WATER | MATERIALFLAG_WATERALPHA;
+ else
+ out->basematerialflags |= MATERIALFLAG_WALL;
+ if (out->textureflags & Q3TEXTUREFLAG_ALPHATEST)
+ {
+ // FIXME: support alpha test?
+ out->basematerialflags |= MATERIALFLAG_ALPHA | MATERIALFLAG_TRANSPARENT;
+ }
+ else if (out->surfaceparms & Q3SURFACEPARM_TRANS)
+ {
+ if (out->textureflags & Q3TEXTUREFLAG_ADDITIVE)
+ out->basematerialflags |= MATERIALFLAG_ADD | MATERIALFLAG_TRANSPARENT;
+ else
+ out->basematerialflags |= MATERIALFLAG_ALPHA | MATERIALFLAG_TRANSPARENT;
+ }
+ strlcpy(out->firstpasstexturename, firstpasstexturename, sizeof(out->firstpasstexturename));
+ if ((flags & Q3SURFACEPARM_SKY) && sky[0])
+ {
+ // quake3 seems to append a _ to the skybox name, so this must do so as well
+ dpsnprintf(loadmodel->brush.skybox, sizeof(loadmodel->brush.skybox), "%s_", sky);
+ }
+ }
+ }
+ }
+ else
+ {
+ Con_Printf("%s parsing error - expected \"{\", found \"%s\"\n", search->filenames[i], com_token);
+ goto parseerror;
+ }
+ }
+parseerror:
+ Mem_Free(f);
+ }
+ }
+ }
- out->number = i;
- Mod_LoadSkinFrame(&out->skin, out->name, TEXF_MIPMAP | TEXF_ALPHA | TEXF_PRECACHE, false, true, true);
+ c = 0;
+ for (j = 0, out = loadmodel->data_textures;j < loadmodel->num_textures;j++, out++)
+ {
+ if (out->surfaceparms == -1)
+ {
+ c++;
+ Con_DPrintf("%s: No shader found for texture \"%s\"\n", loadmodel->name, out->name);
+ out->surfaceparms = 0;
+ if (out->surfaceflags & Q3SURFACEFLAG_NODRAW)
+ out->basematerialflags |= MATERIALFLAG_NODRAW;
+ else if (out->surfaceflags & Q3SURFACEFLAG_SKY)
+ out->basematerialflags |= MATERIALFLAG_SKY;
+ else
+ out->basematerialflags |= MATERIALFLAG_WALL;
+ // these are defaults
+ //if (!strncmp(out->name, "textures/skies/", 15))
+ // out->surfaceparms |= Q3SURFACEPARM_SKY;
+ //if (!strcmp(out->name, "caulk") || !strcmp(out->name, "common/caulk") || !strcmp(out->name, "textures/common/caulk")
+ // || !strcmp(out->name, "nodraw") || !strcmp(out->name, "common/nodraw") || !strcmp(out->name, "textures/common/nodraw"))
+ // out->surfaceparms |= Q3SURFACEPARM_NODRAW;
+ //if (R_TextureHasAlpha(out->skin.base))
+ // out->surfaceparms |= Q3SURFACEPARM_TRANS;
+ }
+ if (!Mod_LoadSkinFrame(&out->skin, out->name, (((out->textureflags & Q3TEXTUREFLAG_NOMIPMAPS) || (out->surfaceparms & Q3SURFACEPARM_NOMIPMAPS)) ? 0 : TEXF_MIPMAP) | TEXF_ALPHA | TEXF_PRECACHE | (out->textureflags & Q3TEXTUREFLAG_NOPICMIP ? 0 : TEXF_PICMIP), false, false, true))
+ if (!Mod_LoadSkinFrame(&out->skin, out->firstpasstexturename, (((out->textureflags & Q3TEXTUREFLAG_NOMIPMAPS) || (out->surfaceparms & Q3SURFACEPARM_NOMIPMAPS)) ? 0 : TEXF_MIPMAP) | TEXF_ALPHA | TEXF_PRECACHE | (out->textureflags & Q3TEXTUREFLAG_NOPICMIP ? 0 : TEXF_PICMIP), false, false, true))
+ if (cls.state != ca_dedicated)
+ Con_Printf("%s: texture loading for shader \"%s\" failed (first layer \"%s\" not found either)\n", loadmodel->name, out->name, out->firstpasstexturename);
+ // no animation
+ out->currentframe = out;
}
+ if (c)
+ Con_DPrintf("%s: %i textures missing shaders\n", loadmodel->name, c);
}
static void Mod_Q3BSP_LoadPlanes(lump_t *l)
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_planes = out;
- loadmodel->brushq3.num_planes = count;
+ loadmodel->brush.data_planes = out;
+ loadmodel->brush.num_planes = count;
for (i = 0;i < count;i++, in++, out++)
{
- out->normal[0] = LittleLong(in->normal[0]);
- out->normal[1] = LittleLong(in->normal[1]);
- out->normal[2] = LittleLong(in->normal[2]);
- out->dist = LittleLong(in->dist);
+ out->normal[0] = LittleFloat(in->normal[0]);
+ out->normal[1] = LittleFloat(in->normal[1]);
+ out->normal[2] = LittleFloat(in->normal[2]);
+ out->dist = LittleFloat(in->dist);
PlaneClassify(out);
}
}
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_brushsides = out;
- loadmodel->brushq3.num_brushsides = count;
+ loadmodel->brush.data_brushsides = out;
+ loadmodel->brush.num_brushsides = count;
for (i = 0;i < count;i++, in++, out++)
{
n = LittleLong(in->planeindex);
- if (n < 0 || n >= loadmodel->brushq3.num_planes)
- Host_Error("Mod_Q3BSP_LoadBrushSides: invalid planeindex %i (%i planes)\n", n, loadmodel->brushq3.num_planes);
- out->plane = loadmodel->brushq3.data_planes + n;
+ if (n < 0 || n >= loadmodel->brush.num_planes)
+ Host_Error("Mod_Q3BSP_LoadBrushSides: invalid planeindex %i (%i planes)\n", n, loadmodel->brush.num_planes);
+ out->plane = loadmodel->brush.data_planes + n;
n = LittleLong(in->textureindex);
- if (n < 0 || n >= loadmodel->brushq3.num_textures)
- Host_Error("Mod_Q3BSP_LoadBrushSides: invalid textureindex %i (%i textures)\n", n, loadmodel->brushq3.num_textures);
- out->texture = loadmodel->brushq3.data_textures + n;
+ if (n < 0 || n >= loadmodel->num_textures)
+ Host_Error("Mod_Q3BSP_LoadBrushSides: invalid textureindex %i (%i textures)\n", n, loadmodel->num_textures);
+ out->texture = loadmodel->data_textures + n;
}
}
{
q3dbrush_t *in;
q3mbrush_t *out;
- int i, n, c, count;
+ int i, j, n, c, count, maxplanes;
+ mplane_t *planes;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_brushes = out;
- loadmodel->brushq3.num_brushes = count;
+ loadmodel->brush.data_brushes = out;
+ loadmodel->brush.num_brushes = count;
+
+ maxplanes = 0;
+ planes = NULL;
for (i = 0;i < count;i++, in++, out++)
{
n = LittleLong(in->firstbrushside);
c = LittleLong(in->numbrushsides);
- if (n < 0 || n + c > loadmodel->brushq3.num_brushsides)
- Host_Error("Mod_Q3BSP_LoadBrushes: invalid brushside range %i : %i (%i brushsides)\n", n, n + c, loadmodel->brushq3.num_brushsides);
- out->firstbrushside = loadmodel->brushq3.data_brushsides + n;
+ if (n < 0 || n + c > loadmodel->brush.num_brushsides)
+ Host_Error("Mod_Q3BSP_LoadBrushes: invalid brushside range %i : %i (%i brushsides)\n", n, n + c, loadmodel->brush.num_brushsides);
+ out->firstbrushside = loadmodel->brush.data_brushsides + n;
out->numbrushsides = c;
n = LittleLong(in->textureindex);
- if (n < 0 || n >= loadmodel->brushq3.num_textures)
- Host_Error("Mod_Q3BSP_LoadBrushes: invalid textureindex %i (%i textures)\n", n, loadmodel->brushq3.num_textures);
- out->texture = loadmodel->brushq3.data_textures + n;
+ if (n < 0 || n >= loadmodel->num_textures)
+ Host_Error("Mod_Q3BSP_LoadBrushes: invalid textureindex %i (%i textures)\n", n, loadmodel->num_textures);
+ out->texture = loadmodel->data_textures + n;
+
+ // make a list of mplane_t structs to construct a colbrush from
+ if (maxplanes < out->numbrushsides)
+ {
+ maxplanes = out->numbrushsides;
+ if (planes)
+ Mem_Free(planes);
+ planes = Mem_Alloc(tempmempool, sizeof(mplane_t) * maxplanes);
+ }
+ for (j = 0;j < out->numbrushsides;j++)
+ {
+ VectorCopy(out->firstbrushside[j].plane->normal, planes[j].normal);
+ planes[j].dist = out->firstbrushside[j].plane->dist;
+ }
+ // make the colbrush from the planes
+ out->colbrushf = Collision_NewBrushFromPlanes(loadmodel->mempool, out->numbrushsides, planes, out->texture->supercontents);
}
+ if (planes)
+ Mem_Free(planes);
}
static void Mod_Q3BSP_LoadEffects(lump_t *l)
{
q3deffect_t *in;
- q3meffect_t *out;
+ q3deffect_t *out;
int i, n, count;
in = (void *)(mod_base + l->fileofs);
for (i = 0;i < count;i++, in++, out++)
{
- strncpy(out->shadername, in->shadername, sizeof(out->shadername) - 1);
+ strlcpy (out->shadername, in->shadername, sizeof (out->shadername));
n = LittleLong(in->brushindex);
- if (n < 0 || n >= loadmodel->brushq3.num_brushes)
- Host_Error("Mod_Q3BSP_LoadEffects: invalid brushindex %i (%i brushes)\n", n, loadmodel->brushq3.num_brushes);
- out->brush = loadmodel->brushq3.data_brushes + n;
+ if (n < 0 || n >= loadmodel->brush.num_brushes)
+ Host_Error("Mod_Q3BSP_LoadEffects: invalid brushindex %i (%i brushes)\n", n, loadmodel->brush.num_brushes);
+ out->brushindex = n;
out->unknown = LittleLong(in->unknown);
}
}
if (l->filelen % sizeof(*in))
Host_Error("Mod_Q3BSP_LoadVertices: funny lump size in %s",loadmodel->name);
loadmodel->brushq3.num_vertices = count = l->filelen / sizeof(*in);
- loadmodel->brushq3.data_vertex3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_texturetexcoord2f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[2]));
- loadmodel->brushq3.data_lightmaptexcoord2f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[2]));
- loadmodel->brushq3.data_svector3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_tvector3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_normal3f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[3]));
- loadmodel->brushq3.data_color4f = Mem_Alloc(loadmodel->mempool, count * sizeof(float[4]));
+ loadmodel->brushq3.data_vertex3f = Mem_Alloc(loadmodel->mempool, count * (sizeof(float) * (3 + 2 + 2 + 4)));
+ loadmodel->brushq3.data_texcoordtexture2f = loadmodel->brushq3.data_vertex3f + count * 3;
+ loadmodel->brushq3.data_texcoordlightmap2f = loadmodel->brushq3.data_texcoordtexture2f + count * 2;
+ loadmodel->brushq3.data_color4f = loadmodel->brushq3.data_texcoordlightmap2f + count * 2;
for (i = 0;i < count;i++, in++)
{
loadmodel->brushq3.data_vertex3f[i * 3 + 0] = LittleFloat(in->origin3f[0]);
loadmodel->brushq3.data_vertex3f[i * 3 + 1] = LittleFloat(in->origin3f[1]);
loadmodel->brushq3.data_vertex3f[i * 3 + 2] = LittleFloat(in->origin3f[2]);
- loadmodel->brushq3.data_texturetexcoord2f[i * 2 + 0] = LittleFloat(in->texcoord2f[0]);
- loadmodel->brushq3.data_texturetexcoord2f[i * 2 + 1] = LittleFloat(in->texcoord2f[1]);
- loadmodel->brushq3.data_lightmaptexcoord2f[i * 2 + 0] = LittleFloat(in->lightmap2f[0]);
- loadmodel->brushq3.data_lightmaptexcoord2f[i * 2 + 1] = LittleFloat(in->lightmap2f[1]);
+ loadmodel->brushq3.data_texcoordtexture2f[i * 2 + 0] = LittleFloat(in->texcoord2f[0]);
+ loadmodel->brushq3.data_texcoordtexture2f[i * 2 + 1] = LittleFloat(in->texcoord2f[1]);
+ loadmodel->brushq3.data_texcoordlightmap2f[i * 2 + 0] = LittleFloat(in->lightmap2f[0]);
+ loadmodel->brushq3.data_texcoordlightmap2f[i * 2 + 1] = LittleFloat(in->lightmap2f[1]);
// svector/tvector are calculated later in face loading
- loadmodel->brushq3.data_svector3f[i * 3 + 0] = 0;
- loadmodel->brushq3.data_svector3f[i * 3 + 1] = 0;
- loadmodel->brushq3.data_svector3f[i * 3 + 2] = 0;
- loadmodel->brushq3.data_tvector3f[i * 3 + 0] = 0;
- loadmodel->brushq3.data_tvector3f[i * 3 + 1] = 0;
- loadmodel->brushq3.data_tvector3f[i * 3 + 2] = 0;
- loadmodel->brushq3.data_normal3f[i * 3 + 0] = LittleFloat(in->normal3f[0]);
- loadmodel->brushq3.data_normal3f[i * 3 + 1] = LittleFloat(in->normal3f[1]);
- loadmodel->brushq3.data_normal3f[i * 3 + 2] = LittleFloat(in->normal3f[2]);
loadmodel->brushq3.data_color4f[i * 4 + 0] = in->color4ub[0] * (1.0f / 255.0f);
loadmodel->brushq3.data_color4f[i * 4 + 1] = in->color4ub[1] * (1.0f / 255.0f);
loadmodel->brushq3.data_color4f[i * 4 + 2] = in->color4ub[2] * (1.0f / 255.0f);
loadmodel->brushq3.num_triangles = count / 3;
loadmodel->brushq3.data_element3i = out;
- loadmodel->brushq3.data_neighbor3i = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
for (i = 0;i < count;i++, in++, out++)
{
*out = LittleLong(*in);
if (*out < 0 || *out >= loadmodel->brushq3.num_vertices)
- Host_Error("Mod_Q3BSP_LoadTriangles: invalid vertexindex %i (%i vertices)\n", *out, loadmodel->brushq3.num_vertices);
+ {
+ Con_Printf("Mod_Q3BSP_LoadTriangles: invalid vertexindex %i (%i vertices), setting to 0\n", *out, loadmodel->brushq3.num_vertices);
+ *out = 0;
+ }
}
}
rtexture_t **out;
int i, count;
+ if (!l->filelen)
+ return;
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
Host_Error("Mod_Q3BSP_LoadLightmaps: funny lump size in %s",loadmodel->name);
static void Mod_Q3BSP_LoadFaces(lump_t *l)
{
- q3dface_t *in;
- q3mface_t *out;
- int i, j, n, count, invalidelements, patchsize[2];
+ q3dface_t *in, *oldin;
+ msurface_t *out, *oldout;
+ int i, oldi, j, n, count, invalidelements, patchsize[2], finalwidth, finalheight, xtess, ytess, finalvertices, finaltriangles, firstvertex, firstelement, type, oldnumtriangles, oldnumtriangles2, meshnum, meshvertices, meshtriangles, numvertices, numtriangles;
+ //int *originalelement3i;
+ //int *originalneighbor3i;
+ float *originalvertex3f;
+ //float *originalsvector3f;
+ //float *originaltvector3f;
+ //float *originalnormal3f;
+ float *originalcolor4f;
+ float *originaltexcoordtexture2f;
+ float *originaltexcoordlightmap2f;
+ float *v;
+ surfmesh_t *mesh, *tempmeshlist[1024];
in = (void *)(mod_base + l->fileofs);
if (l->filelen % sizeof(*in))
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_faces = out;
- loadmodel->brushq3.num_faces = count;
+ loadmodel->data_surfaces = out;
+ loadmodel->num_surfaces = count;
- for (i = 0;i < count;i++, in++, out++)
+ i = 0;
+ for (meshnum = 0;i < count;meshnum++)
{
- // check face type first
- out->type = LittleLong(in->type);
- if (out->type != Q3FACETYPE_POLYGON
- && out->type != Q3FACETYPE_PATCH
- && out->type != Q3FACETYPE_MESH
- && out->type != Q3FACETYPE_FLARE)
+ oldi = i;
+ oldin = in;
+ oldout = out;
+ meshvertices = 0;
+ meshtriangles = 0;
+ for (;i < count;i++, in++, out++)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i: unknown face type %i\n", i, n);
- out->type = 0; // error
- continue;
- }
+ // check face type first
+ type = LittleLong(in->type);
+ if (type != Q3FACETYPE_POLYGON
+ && type != Q3FACETYPE_PATCH
+ && type != Q3FACETYPE_MESH
+ && type != Q3FACETYPE_FLARE)
+ {
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i: unknown face type %i\n", i, type);
+ continue;
+ }
- n = LittleLong(in->textureindex);
- if (n < 0 || n >= loadmodel->brushq3.num_textures)
- {
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i: invalid textureindex %i (%i textures)\n", i, n, loadmodel->brushq3.num_textures);
- out->type = 0; // error
- continue;
- n = 0;
- }
- out->texture = loadmodel->brushq3.data_textures + n;
- n = LittleLong(in->effectindex);
- if (n < -1 || n >= loadmodel->brushq3.num_effects)
- {
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid effectindex %i (%i effects)\n", i, out->texture->name, n, loadmodel->brushq3.num_effects);
- n = -1;
- }
- if (n == -1)
- out->effect = NULL;
- else
- out->effect = loadmodel->brushq3.data_effects + n;
- n = LittleLong(in->lightmapindex);
- if (n < -1 || n >= loadmodel->brushq3.num_lightmaps)
- {
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid lightmapindex %i (%i lightmaps)\n", i, out->texture->name, n, loadmodel->brushq3.num_lightmaps);
- n = -1;
- }
- if (n == -1)
- out->lightmaptexture = NULL;
- else
- out->lightmaptexture = loadmodel->brushq3.data_lightmaps[n];
+ n = LittleLong(in->textureindex);
+ if (n < 0 || n >= loadmodel->num_textures)
+ {
+ Con_DPrintf("Mod_Q3BSP_LoadFaces: face #%i: invalid textureindex %i (%i textures)\n", i, n, loadmodel->num_textures);
+ continue;
+ }
+ out->texture = loadmodel->data_textures + n;
+ n = LittleLong(in->effectindex);
+ if (n < -1 || n >= loadmodel->brushq3.num_effects)
+ {
+ if (developer.integer >= 2)
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid effectindex %i (%i effects)\n", i, out->texture->name, n, loadmodel->brushq3.num_effects);
+ n = -1;
+ }
+ if (n == -1)
+ out->effect = NULL;
+ else
+ out->effect = loadmodel->brushq3.data_effects + n;
+ n = LittleLong(in->lightmapindex);
+ if (n >= loadmodel->brushq3.num_lightmaps)
+ {
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid lightmapindex %i (%i lightmaps)\n", i, out->texture->name, n, loadmodel->brushq3.num_lightmaps);
+ n = -1;
+ }
+ else if (n < 0)
+ n = -1;
+ if (n == -1)
+ out->lightmaptexture = NULL;
+ else
+ out->lightmaptexture = loadmodel->brushq3.data_lightmaps[n];
- out->firstvertex = LittleLong(in->firstvertex);
- out->numvertices = LittleLong(in->numvertices);
- out->firstelement = LittleLong(in->firstelement);
- out->numelements = LittleLong(in->numelements);
- out->numtriangles = out->numelements / 3;
- if (out->firstvertex < 0 || out->firstvertex + out->numvertices > loadmodel->brushq3.num_vertices)
- {
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid vertex range %i : %i (%i vertices)\n", i, out->texture->name, out->firstvertex, out->firstvertex + out->numvertices, loadmodel->brushq3.num_vertices);
- out->type = 0; // error
- continue;
- }
- if (out->firstelement < 0 || out->firstelement + out->numelements > loadmodel->brushq3.num_triangles * 3)
- {
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid element range %i : %i (%i elements)\n", i, out->texture->name, out->firstelement, out->firstelement + out->numelements, loadmodel->brushq3.num_triangles * 3);
- out->type = 0; // error
- continue;
- }
- if (out->numtriangles * 3 != out->numelements)
- {
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): numelements %i is not a multiple of 3\n", i, out->texture->name, out->numelements);
- out->type = 0; // error
- continue;
- }
- switch(out->type)
- {
- case Q3FACETYPE_POLYGON:
- case Q3FACETYPE_MESH:
- out->data_vertex3f = loadmodel->brushq3.data_vertex3f + out->firstvertex * 3;
- out->data_texturetexcoord2f = loadmodel->brushq3.data_texturetexcoord2f + out->firstvertex * 2;
- out->data_lightmaptexcoord2f = loadmodel->brushq3.data_lightmaptexcoord2f + out->firstvertex * 2;
- out->data_svector3f = loadmodel->brushq3.data_svector3f + out->firstvertex * 3;
- out->data_tvector3f = loadmodel->brushq3.data_tvector3f + out->firstvertex * 3;
- out->data_normal3f = loadmodel->brushq3.data_normal3f + out->firstvertex * 3;
- out->data_color4f = loadmodel->brushq3.data_color4f + out->firstvertex * 4;
- out->data_element3i = loadmodel->brushq3.data_element3i + out->firstelement;
- out->data_neighbor3i = loadmodel->brushq3.data_neighbor3i + out->firstelement;
- break;
- case Q3FACETYPE_PATCH:
- patchsize[0] = LittleLong(in->specific.patch.patchsize[0]);
- patchsize[1] = LittleLong(in->specific.patch.patchsize[1]);
- if (patchsize[0] < 1 || patchsize[1] < 1)
+ firstvertex = LittleLong(in->firstvertex);
+ numvertices = LittleLong(in->numvertices);
+ firstelement = LittleLong(in->firstelement);
+ numtriangles = LittleLong(in->numelements) / 3;
+ if (numtriangles * 3 != LittleLong(in->numelements))
{
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid patchsize %ix%i\n", i, out->texture->name, patchsize[0], patchsize[1]);
- out->type = 0; // error
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): numelements %i is not a multiple of 3\n", i, out->texture->name, LittleLong(in->numelements));
continue;
}
- // FIXME: convert patch to triangles here!
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_PATCH not supported (yet)\n", i, out->texture->name);
- out->type = 0;
- continue;
- break;
- case Q3FACETYPE_FLARE:
- Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_FLARE not supported (yet)\n", i, out->texture->name);
- out->type = 0;
- continue;
- break;
+ if (firstvertex < 0 || firstvertex + numvertices > loadmodel->brushq3.num_vertices)
+ {
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid vertex range %i : %i (%i vertices)\n", i, out->texture->name, firstvertex, firstvertex + numvertices, loadmodel->brushq3.num_vertices);
+ continue;
+ }
+ if (firstelement < 0 || firstelement + numtriangles * 3 > loadmodel->brushq3.num_triangles * 3)
+ {
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid element range %i : %i (%i elements)\n", i, out->texture->name, firstelement, firstelement + numtriangles * 3, loadmodel->brushq3.num_triangles * 3);
+ continue;
+ }
+ switch(type)
+ {
+ case Q3FACETYPE_POLYGON:
+ case Q3FACETYPE_MESH:
+ // no processing necessary
+ break;
+ case Q3FACETYPE_PATCH:
+ patchsize[0] = LittleLong(in->specific.patch.patchsize[0]);
+ patchsize[1] = LittleLong(in->specific.patch.patchsize[1]);
+ if (numvertices != (patchsize[0] * patchsize[1]) || patchsize[0] < 3 || patchsize[1] < 3 || !(patchsize[0] & 1) || !(patchsize[1] & 1) || patchsize[0] * patchsize[1] >= min(r_subdivisions_maxvertices.integer, r_subdivisions_collision_maxvertices.integer))
+ {
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): invalid patchsize %ix%i\n", i, out->texture->name, patchsize[0], patchsize[1]);
+ continue;
+ }
+ originalvertex3f = loadmodel->brushq3.data_vertex3f + firstvertex * 3;
+ // convert patch to Q3FACETYPE_MESH
+ xtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
+ ytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
+ // bound to user settings
+ xtess = bound(r_subdivisions_mintess.integer, xtess, r_subdivisions_maxtess.integer);
+ ytess = bound(r_subdivisions_mintess.integer, ytess, r_subdivisions_maxtess.integer);
+ // bound to sanity settings
+ xtess = bound(1, xtess, 1024);
+ ytess = bound(1, ytess, 1024);
+ // bound to user limit on vertices
+ while ((xtess > 1 || ytess > 1) && (((patchsize[0] - 1) * xtess) + 1) * (((patchsize[1] - 1) * ytess) + 1) > min(r_subdivisions_maxvertices.integer, 262144))
+ {
+ if (xtess > ytess)
+ xtess--;
+ else
+ ytess--;
+ }
+ finalwidth = ((patchsize[0] - 1) * xtess) + 1;
+ finalheight = ((patchsize[1] - 1) * ytess) + 1;
+ numvertices = finalwidth * finalheight;
+ numtriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+ break;
+ case Q3FACETYPE_FLARE:
+ if (developer.integer >= 2)
+ Con_Printf("Mod_Q3BSP_LoadFaces: face #%i (texture \"%s\"): Q3FACETYPE_FLARE not supported (yet)\n", i, out->texture->name);
+ // don't render it
+ continue;
+ }
+ out->num_vertices = numvertices;
+ out->num_triangles = numtriangles;
+ if (meshvertices + out->num_vertices > 65536)
+ break;
+ meshvertices += out->num_vertices;
+ meshtriangles += out->num_triangles;
}
- for (j = 0, invalidelements = 0;j < out->numelements;j++)
- if (out->data_element3i[j] < 0 || out->data_element3i[j] >= out->numvertices)
- invalidelements++;
- if (invalidelements)
+
+ i = oldi;
+ in = oldin;
+ out = oldout;
+ mesh = tempmeshlist[meshnum] = Mod_AllocSurfMesh(loadmodel->mempool, meshvertices, meshtriangles, false, false, true, false);
+ meshvertices = 0;
+ meshtriangles = 0;
+ for (;i < count && meshvertices + out->num_vertices <= mesh->num_vertices;i++, in++, out++)
{
- Con_Printf("Mod_Q3BSP_LoadFaces: Warning: face #%i has %i invalid elements, type = %i, texture->name = \"%s\", texture->surfaceflags = %i, texture->contents = %i, firstvertex = %i, numvertices = %i, firstelement = %i, numelements = %i, elements list:\n", i, invalidelements, out->type, out->texture->name, out->texture->surfaceflags, out->texture->contents, out->firstvertex, out->numvertices, out->firstelement, out->numelements);
- for (j = 0;j < out->numelements;j++)
+ if (out->num_vertices < 3 || out->num_triangles < 1)
+ continue;
+
+ type = LittleLong(in->type);
+ firstvertex = LittleLong(in->firstvertex);
+ firstelement = LittleLong(in->firstelement);
+ out->groupmesh = mesh;
+ out->num_firstvertex = meshvertices;
+ out->num_firsttriangle = meshtriangles;
+ switch(type)
+ {
+ case Q3FACETYPE_POLYGON:
+ case Q3FACETYPE_MESH:
+ // no processing necessary
+ for (j = 0;j < out->num_vertices;j++)
+ {
+ (out->groupmesh->data_vertex3f + 3 * out->num_firstvertex)[j * 3 + 0] = loadmodel->brushq3.data_vertex3f[(firstvertex + j) * 3 + 0];
+ (out->groupmesh->data_vertex3f + 3 * out->num_firstvertex)[j * 3 + 1] = loadmodel->brushq3.data_vertex3f[(firstvertex + j) * 3 + 1];
+ (out->groupmesh->data_vertex3f + 3 * out->num_firstvertex)[j * 3 + 2] = loadmodel->brushq3.data_vertex3f[(firstvertex + j) * 3 + 2];
+ (out->groupmesh->data_texcoordtexture2f + 2 * out->num_firstvertex)[j * 2 + 0] = loadmodel->brushq3.data_texcoordtexture2f[(firstvertex + j) * 2 + 0];
+ (out->groupmesh->data_texcoordtexture2f + 2 * out->num_firstvertex)[j * 2 + 1] = loadmodel->brushq3.data_texcoordtexture2f[(firstvertex + j) * 2 + 1];
+ (out->groupmesh->data_texcoordlightmap2f + 2 * out->num_firstvertex)[j * 2 + 0] = loadmodel->brushq3.data_texcoordlightmap2f[(firstvertex + j) * 2 + 0];
+ (out->groupmesh->data_texcoordlightmap2f + 2 * out->num_firstvertex)[j * 2 + 1] = loadmodel->brushq3.data_texcoordlightmap2f[(firstvertex + j) * 2 + 1];
+ (out->groupmesh->data_lightmapcolor4f + 4 * out->num_firstvertex)[j * 4 + 0] = loadmodel->brushq3.data_color4f[(firstvertex + j) * 4 + 0];
+ (out->groupmesh->data_lightmapcolor4f + 4 * out->num_firstvertex)[j * 4 + 1] = loadmodel->brushq3.data_color4f[(firstvertex + j) * 4 + 1];
+ (out->groupmesh->data_lightmapcolor4f + 4 * out->num_firstvertex)[j * 4 + 2] = loadmodel->brushq3.data_color4f[(firstvertex + j) * 4 + 2];
+ (out->groupmesh->data_lightmapcolor4f + 4 * out->num_firstvertex)[j * 4 + 3] = loadmodel->brushq3.data_color4f[(firstvertex + j) * 4 + 3];
+ }
+ for (j = 0;j < out->num_triangles*3;j++)
+ (out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] = loadmodel->brushq3.data_element3i[firstelement + j] + out->num_firstvertex;
+ break;
+ case Q3FACETYPE_PATCH:
+ patchsize[0] = LittleLong(in->specific.patch.patchsize[0]);
+ patchsize[1] = LittleLong(in->specific.patch.patchsize[1]);
+ originalvertex3f = loadmodel->brushq3.data_vertex3f + firstvertex * 3;
+ originaltexcoordtexture2f = loadmodel->brushq3.data_texcoordtexture2f + firstvertex * 2;
+ originaltexcoordlightmap2f = loadmodel->brushq3.data_texcoordlightmap2f + firstvertex * 2;
+ originalcolor4f = loadmodel->brushq3.data_color4f + firstvertex * 4;
+ // convert patch to Q3FACETYPE_MESH
+ xtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
+ ytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_tolerance.value);
+ // bound to user settings
+ xtess = bound(r_subdivisions_mintess.integer, xtess, r_subdivisions_maxtess.integer);
+ ytess = bound(r_subdivisions_mintess.integer, ytess, r_subdivisions_maxtess.integer);
+ // bound to sanity settings
+ xtess = bound(1, xtess, 1024);
+ ytess = bound(1, ytess, 1024);
+ // bound to user limit on vertices
+ while ((xtess > 1 || ytess > 1) && (((patchsize[0] - 1) * xtess) + 1) * (((patchsize[1] - 1) * ytess) + 1) > min(r_subdivisions_maxvertices.integer, 262144))
+ {
+ if (xtess > ytess)
+ xtess--;
+ else
+ ytess--;
+ }
+ finalwidth = ((patchsize[0] - 1) * xtess) + 1;
+ finalheight = ((patchsize[1] - 1) * ytess) + 1;
+ finalvertices = finalwidth * finalheight;
+ finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+ type = Q3FACETYPE_MESH;
+ // generate geometry
+ // (note: normals are skipped because they get recalculated)
+ Q3PatchTesselateFloat(3, sizeof(float[3]), (out->groupmesh->data_vertex3f + 3 * out->num_firstvertex), patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, xtess, ytess);
+ Q3PatchTesselateFloat(2, sizeof(float[2]), (out->groupmesh->data_texcoordtexture2f + 2 * out->num_firstvertex), patchsize[0], patchsize[1], sizeof(float[2]), originaltexcoordtexture2f, xtess, ytess);
+ Q3PatchTesselateFloat(2, sizeof(float[2]), (out->groupmesh->data_texcoordlightmap2f + 2 * out->num_firstvertex), patchsize[0], patchsize[1], sizeof(float[2]), originaltexcoordlightmap2f, xtess, ytess);
+ Q3PatchTesselateFloat(4, sizeof(float[4]), (out->groupmesh->data_lightmapcolor4f + 4 * out->num_firstvertex), patchsize[0], patchsize[1], sizeof(float[4]), originalcolor4f, xtess, ytess);
+ Q3PatchTriangleElements((out->groupmesh->data_element3i + 3 * out->num_firsttriangle), finalwidth, finalheight, out->num_firstvertex);
+ out->num_triangles = Mod_RemoveDegenerateTriangles(out->num_triangles, (out->groupmesh->data_element3i + 3 * out->num_firsttriangle), (out->groupmesh->data_element3i + 3 * out->num_firsttriangle), out->groupmesh->data_vertex3f);
+ if (developer.integer >= 2)
+ {
+ if (out->num_triangles < finaltriangles)
+ Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles, %i degenerate triangles removed (leaving %i)\n", patchsize[0], patchsize[1], out->num_vertices, finaltriangles, finaltriangles - out->num_triangles, out->num_triangles);
+ else
+ Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve subdivided to %i vertices / %i triangles\n", patchsize[0], patchsize[1], out->num_vertices, out->num_triangles);
+ }
+ // q3map does not put in collision brushes for curves... ugh
+ // build the lower quality collision geometry
+ xtess = Q3PatchTesselationOnX(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_collision_tolerance.value);
+ ytess = Q3PatchTesselationOnY(patchsize[0], patchsize[1], 3, originalvertex3f, r_subdivisions_collision_tolerance.value);
+ // bound to user settings
+ xtess = bound(r_subdivisions_collision_mintess.integer, xtess, r_subdivisions_collision_maxtess.integer);
+ ytess = bound(r_subdivisions_collision_mintess.integer, ytess, r_subdivisions_collision_maxtess.integer);
+ // bound to sanity settings
+ xtess = bound(1, xtess, 1024);
+ ytess = bound(1, ytess, 1024);
+ // bound to user limit on vertices
+ while ((xtess > 1 || ytess > 1) && (((patchsize[0] - 1) * xtess) + 1) * (((patchsize[1] - 1) * ytess) + 1) > min(r_subdivisions_collision_maxvertices.integer, 262144))
+ {
+ if (xtess > ytess)
+ xtess--;
+ else
+ ytess--;
+ }
+ finalwidth = ((patchsize[0] - 1) * xtess) + 1;
+ finalheight = ((patchsize[1] - 1) * ytess) + 1;
+ finalvertices = finalwidth * finalheight;
+ finaltriangles = (finalwidth - 1) * (finalheight - 1) * 2;
+
+ out->data_collisionvertex3f = Mem_Alloc(loadmodel->mempool, sizeof(float[3]) * finalvertices);
+ out->data_collisionelement3i = Mem_Alloc(loadmodel->mempool, sizeof(int[3]) * finaltriangles);
+ out->num_collisionvertices = finalvertices;
+ out->num_collisiontriangles = finaltriangles;
+ Q3PatchTesselateFloat(3, sizeof(float[3]), out->data_collisionvertex3f, patchsize[0], patchsize[1], sizeof(float[3]), originalvertex3f, xtess, ytess);
+ Q3PatchTriangleElements(out->data_collisionelement3i, finalwidth, finalheight, 0);
+
+ //Mod_SnapVertices(3, out->num_vertices, (out->groupmesh->data_vertex3f + 3 * out->num_firstvertex), 0.25);
+ Mod_SnapVertices(3, out->num_collisionvertices, out->data_collisionvertex3f, 1);
+
+ oldnumtriangles = out->num_triangles;
+ oldnumtriangles2 = out->num_collisiontriangles;
+ out->num_collisiontriangles = Mod_RemoveDegenerateTriangles(out->num_collisiontriangles, out->data_collisionelement3i, out->data_collisionelement3i, out->data_collisionvertex3f);
+ if (developer.integer)
+ Con_Printf("Mod_Q3BSP_LoadFaces: %ix%i curve became %i:%i vertices / %i:%i triangles (%i:%i degenerate)\n", patchsize[0], patchsize[1], out->num_vertices, out->num_collisionvertices, oldnumtriangles, oldnumtriangles2, oldnumtriangles - out->num_triangles, oldnumtriangles2 - out->num_collisiontriangles);
+ break;
+ default:
+ break;
+ }
+ meshvertices += out->num_vertices;
+ meshtriangles += out->num_triangles;
+ for (j = 0, invalidelements = 0;j < out->num_triangles * 3;j++)
+ if ((out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] < out->num_firstvertex || (out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] >= out->num_firstvertex + out->num_vertices)
+ invalidelements++;
+ if (invalidelements)
+ {
+ Con_Printf("Mod_Q3BSP_LoadFaces: Warning: face #%i has %i invalid elements, type = %i, texture->name = \"%s\", texture->surfaceflags = %i, firstvertex = %i, numvertices = %i, firstelement = %i, numelements = %i, elements list:\n", i, invalidelements, type, out->texture->name, out->texture->surfaceflags, firstvertex, out->num_vertices, firstelement, out->num_triangles * 3);
+ for (j = 0;j < out->num_triangles * 3;j++)
+ {
+ Con_Printf(" %i", (out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] - out->num_firstvertex);
+ if ((out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] < out->num_firstvertex || (out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] >= out->num_firstvertex + out->num_vertices)
+ (out->groupmesh->data_element3i + 3 * out->num_firsttriangle)[j] = out->num_firstvertex;
+ }
+ Con_Print("\n");
+ }
+ // for per pixel lighting
+ Mod_BuildTextureVectorsAndNormals(out->num_firstvertex, out->num_vertices, out->num_triangles, out->groupmesh->data_vertex3f, out->groupmesh->data_texcoordtexture2f, (out->groupmesh->data_element3i + 3 * out->num_firsttriangle), out->groupmesh->data_svector3f, out->groupmesh->data_tvector3f, out->groupmesh->data_normal3f, true);
+ // calculate a bounding box
+ VectorClear(out->mins);
+ VectorClear(out->maxs);
+ if (out->num_vertices)
{
- Con_Printf(" %i", out->data_element3i[j]);
- if (out->data_element3i[j] < 0 || out->data_element3i[j] >= out->numvertices)
- out->data_element3i[j] = 0;
+ VectorCopy((out->groupmesh->data_vertex3f + 3 * out->num_firstvertex), out->mins);
+ VectorCopy((out->groupmesh->data_vertex3f + 3 * out->num_firstvertex), out->maxs);
+ for (j = 1, v = (out->groupmesh->data_vertex3f + 3 * out->num_firstvertex) + 3;j < out->num_vertices;j++, v += 3)
+ {
+ out->mins[0] = min(out->mins[0], v[0]);
+ out->maxs[0] = max(out->maxs[0], v[0]);
+ out->mins[1] = min(out->mins[1], v[1]);
+ out->maxs[1] = max(out->maxs[1], v[1]);
+ out->mins[2] = min(out->mins[2], v[2]);
+ out->maxs[2] = max(out->maxs[2], v[2]);
+ }
+ out->mins[0] -= 1.0f;
+ out->mins[1] -= 1.0f;
+ out->mins[2] -= 1.0f;
+ out->maxs[0] += 1.0f;
+ out->maxs[1] += 1.0f;
+ out->maxs[2] += 1.0f;
}
- Con_Printf("\n");
+ // set lightmap styles for consistency with q1bsp
+ //out->lightmapinfo->styles[0] = 0;
+ //out->lightmapinfo->styles[1] = 255;
+ //out->lightmapinfo->styles[2] = 255;
+ //out->lightmapinfo->styles[3] = 255;
}
}
+
+ // now store the completed list of meshes
+ loadmodel->nummeshes = meshnum;
+ if (loadmodel->nummeshes)
+ {
+ loadmodel->meshlist = Mem_Alloc(loadmodel->mempool, sizeof(surfmesh_t *) * loadmodel->nummeshes);
+ memcpy(loadmodel->meshlist, tempmeshlist, sizeof(surfmesh_t *) * loadmodel->nummeshes);
+ }
+
+ // free the no longer needed vertex data
+ loadmodel->brushq3.num_vertices = 0;
+ Mem_Free(loadmodel->brushq3.data_vertex3f);
+ loadmodel->brushq3.data_vertex3f = NULL;
+ loadmodel->brushq3.data_texcoordtexture2f = NULL;
+ loadmodel->brushq3.data_texcoordlightmap2f = NULL;
+ loadmodel->brushq3.data_color4f = NULL;
+ // free the no longer needed triangle data
+ loadmodel->brushq3.num_triangles = 0;
+ Mem_Free(loadmodel->brushq3.data_element3i);
+ loadmodel->brushq3.data_element3i = NULL;
}
static void Mod_Q3BSP_LoadModels(lump_t *l)
{
q3dmodel_t *in;
- q3mmodel_t *out;
+ q3dmodel_t *out;
int i, j, n, c, count;
in = (void *)(mod_base + l->fileofs);
}
n = LittleLong(in->firstface);
c = LittleLong(in->numfaces);
- if (n < 0 || n + c > loadmodel->brushq3.num_faces)
- Host_Error("Mod_Q3BSP_LoadModels: invalid face range %i : %i (%i faces)\n", n, n + c, loadmodel->brushq3.num_faces);
- out->firstface = loadmodel->brushq3.data_faces + n;
+ if (n < 0 || n + c > loadmodel->num_surfaces)
+ Host_Error("Mod_Q3BSP_LoadModels: invalid face range %i : %i (%i faces)\n", n, n + c, loadmodel->num_surfaces);
+ out->firstface = n;
out->numfaces = c;
n = LittleLong(in->firstbrush);
c = LittleLong(in->numbrushes);
- if (n < 0 || n + c > loadmodel->brushq3.num_brushes)
- Host_Error("Mod_Q3BSP_LoadModels: invalid brush range %i : %i (%i brushes)\n", n, n + c, loadmodel->brushq3.num_brushes);
- out->firstbrush = loadmodel->brushq3.data_brushes + n;
+ if (n < 0 || n + c > loadmodel->brush.num_brushes)
+ Host_Error("Mod_Q3BSP_LoadModels: invalid brush range %i : %i (%i brushes)\n", n, n + c, loadmodel->brush.num_brushes);
+ out->firstbrush = n;
out->numbrushes = c;
}
}
static void Mod_Q3BSP_LoadLeafBrushes(lump_t *l)
{
int *in;
- q3mbrush_t **out;
+ int *out;
int i, n, count;
in = (void *)(mod_base + l->fileofs);
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_leafbrushes = out;
- loadmodel->brushq3.num_leafbrushes = count;
+ loadmodel->brush.data_leafbrushes = out;
+ loadmodel->brush.num_leafbrushes = count;
for (i = 0;i < count;i++, in++, out++)
{
n = LittleLong(*in);
- if (n < 0 || n >= loadmodel->brushq3.num_brushes)
- Host_Error("Mod_Q3BSP_LoadLeafBrushes: invalid brush index %i (%i brushes)\n", n, loadmodel->brushq3.num_brushes);
- *out = loadmodel->brushq3.data_brushes + n;
+ if (n < 0 || n >= loadmodel->brush.num_brushes)
+ Host_Error("Mod_Q3BSP_LoadLeafBrushes: invalid brush index %i (%i brushes)\n", n, loadmodel->brush.num_brushes);
+ *out = n;
}
}
static void Mod_Q3BSP_LoadLeafFaces(lump_t *l)
{
int *in;
- q3mface_t **out;
+ int *out;
int i, n, count;
in = (void *)(mod_base + l->fileofs);
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_leaffaces = out;
- loadmodel->brushq3.num_leaffaces = count;
+ loadmodel->brush.data_leafsurfaces = out;
+ loadmodel->brush.num_leafsurfaces = count;
for (i = 0;i < count;i++, in++, out++)
{
n = LittleLong(*in);
- if (n < 0 || n >= loadmodel->brushq3.num_faces)
- Host_Error("Mod_Q3BSP_LoadLeafFaces: invalid face index %i (%i faces)\n", n, loadmodel->brushq3.num_faces);
- *out = loadmodel->brushq3.data_faces + n;
+ if (n < 0 || n >= loadmodel->num_surfaces)
+ Host_Error("Mod_Q3BSP_LoadLeafFaces: invalid face index %i (%i faces)\n", n, loadmodel->num_surfaces);
+ *out = n;
}
}
static void Mod_Q3BSP_LoadLeafs(lump_t *l)
{
q3dleaf_t *in;
- q3mleaf_t *out;
+ mleaf_t *out;
int i, j, n, c, count;
in = (void *)(mod_base + l->fileofs);
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_leafs = out;
- loadmodel->brushq3.num_leafs = count;
+ loadmodel->brush.data_leafs = out;
+ loadmodel->brush.num_leafs = count;
for (i = 0;i < count;i++, in++, out++)
{
- out->isnode = false;
out->parent = NULL;
+ out->plane = NULL;
out->clusterindex = LittleLong(in->clusterindex);
out->areaindex = LittleLong(in->areaindex);
for (j = 0;j < 3;j++)
{
// yes the mins/maxs are ints
- out->mins[j] = LittleLong(in->mins[j]);
- out->maxs[j] = LittleLong(in->maxs[j]);
+ out->mins[j] = LittleLong(in->mins[j]) - 1;
+ out->maxs[j] = LittleLong(in->maxs[j]) + 1;
}
n = LittleLong(in->firstleafface);
c = LittleLong(in->numleaffaces);
- if (n < 0 || n + c > loadmodel->brushq3.num_leaffaces)
- Host_Error("Mod_Q3BSP_LoadLeafs: invalid leafface range %i : %i (%i leaffaces)\n", n, n + c, loadmodel->brushq3.num_leaffaces);
- out->firstleafface = loadmodel->brushq3.data_leaffaces + n;
- out->numleaffaces = c;
+ if (n < 0 || n + c > loadmodel->brush.num_leafsurfaces)
+ Host_Error("Mod_Q3BSP_LoadLeafs: invalid leafsurface range %i : %i (%i leafsurfaces)\n", n, n + c, loadmodel->brush.num_leafsurfaces);
+ out->firstleafsurface = loadmodel->brush.data_leafsurfaces + n;
+ out->numleafsurfaces = c;
n = LittleLong(in->firstleafbrush);
c = LittleLong(in->numleafbrushes);
- if (n < 0 || n + c > loadmodel->brushq3.num_leafbrushes)
- Host_Error("Mod_Q3BSP_LoadLeafs: invalid leafbrush range %i : %i (%i leafbrushes)\n", n, n + c, loadmodel->brushq3.num_leafbrushes);
- out->firstleafbrush = loadmodel->brushq3.data_leafbrushes + n;
+ if (n < 0 || n + c > loadmodel->brush.num_leafbrushes)
+ Host_Error("Mod_Q3BSP_LoadLeafs: invalid leafbrush range %i : %i (%i leafbrushes)\n", n, n + c, loadmodel->brush.num_leafbrushes);
+ out->firstleafbrush = loadmodel->brush.data_leafbrushes + n;
out->numleafbrushes = c;
}
}
-static void Mod_Q3BSP_LoadNodes_RecursiveSetParent(q3mnode_t *node, q3mnode_t *parent)
-{
- if (node->parent)
- Host_Error("Mod_Q3BSP_LoadNodes_RecursiveSetParent: runaway recursion\n");
- node->parent = parent;
- if (node->isnode)
- {
- Mod_Q3BSP_LoadNodes_RecursiveSetParent(node->children[0], node);
- Mod_Q3BSP_LoadNodes_RecursiveSetParent(node->children[1], node);
- }
-}
-
static void Mod_Q3BSP_LoadNodes(lump_t *l)
{
q3dnode_t *in;
- q3mnode_t *out;
+ mnode_t *out;
int i, j, n, count;
in = (void *)(mod_base + l->fileofs);
count = l->filelen / sizeof(*in);
out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_nodes = out;
- loadmodel->brushq3.num_nodes = count;
+ loadmodel->brush.data_nodes = out;
+ loadmodel->brush.num_nodes = count;
for (i = 0;i < count;i++, in++, out++)
{
- out->isnode = true;
out->parent = NULL;
n = LittleLong(in->planeindex);
- if (n < 0 || n >= loadmodel->brushq3.num_planes)
- Host_Error("Mod_Q3BSP_LoadNodes: invalid planeindex %i (%i planes)\n", n, loadmodel->brushq3.num_planes);
- out->plane = loadmodel->brushq3.data_planes + n;
+ if (n < 0 || n >= loadmodel->brush.num_planes)
+ Host_Error("Mod_Q3BSP_LoadNodes: invalid planeindex %i (%i planes)\n", n, loadmodel->brush.num_planes);
+ out->plane = loadmodel->brush.data_planes + n;
for (j = 0;j < 2;j++)
{
n = LittleLong(in->childrenindex[j]);
if (n >= 0)
{
- if (n >= loadmodel->brushq3.num_nodes)
- Host_Error("Mod_Q3BSP_LoadNodes: invalid child node index %i (%i nodes)\n", n, loadmodel->brushq3.num_nodes);
- out->children[j] = loadmodel->brushq3.data_nodes + n;
+ if (n >= loadmodel->brush.num_nodes)
+ Host_Error("Mod_Q3BSP_LoadNodes: invalid child node index %i (%i nodes)\n", n, loadmodel->brush.num_nodes);
+ out->children[j] = loadmodel->brush.data_nodes + n;
}
else
{
- n = 1 - n;
- if (n >= loadmodel->brushq3.num_leafs)
- Host_Error("Mod_Q3BSP_LoadNodes: invalid child leaf index %i (%i leafs)\n", n, loadmodel->brushq3.num_leafs);
- out->children[j] = (q3mnode_t *)(loadmodel->brushq3.data_leafs + n);
+ n = -1 - n;
+ if (n >= loadmodel->brush.num_leafs)
+ Host_Error("Mod_Q3BSP_LoadNodes: invalid child leaf index %i (%i leafs)\n", n, loadmodel->brush.num_leafs);
+ out->children[j] = (mnode_t *)(loadmodel->brush.data_leafs + n);
}
}
- // we don't load the mins/maxs
+ for (j = 0;j < 3;j++)
+ {
+ // yes the mins/maxs are ints
+ out->mins[j] = LittleLong(in->mins[j]) - 1;
+ out->maxs[j] = LittleLong(in->maxs[j]) + 1;
+ }
}
// set the parent pointers
- Mod_Q3BSP_LoadNodes_RecursiveSetParent(loadmodel->brushq3.data_nodes, NULL);
+ Mod_Q1BSP_LoadNodes_RecursiveSetParent(loadmodel->brush.data_nodes, NULL);
}
static void Mod_Q3BSP_LoadLightGrid(lump_t *l)
loadmodel->brushq3.num_lightgrid_isize[1] = loadmodel->brushq3.num_lightgrid_imaxs[1] - loadmodel->brushq3.num_lightgrid_imins[1] + 1;
loadmodel->brushq3.num_lightgrid_isize[2] = loadmodel->brushq3.num_lightgrid_imaxs[2] - loadmodel->brushq3.num_lightgrid_imins[2] + 1;
count = loadmodel->brushq3.num_lightgrid_isize[0] * loadmodel->brushq3.num_lightgrid_isize[1] * loadmodel->brushq3.num_lightgrid_isize[2];
- if (l->filelen < count * (int)sizeof(*in))
- Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)\n", l->filelen, count * sizeof(*in), loadmodel->brushq3.num_lightgrid_dimensions[0], loadmodel->brushq3.num_lightgrid_dimensions[1], loadmodel->brushq3.num_lightgrid_dimensions[2]);
- if (l->filelen != count * (int)sizeof(*in))
- Con_Printf("Mod_Q3BSP_LoadLightGrid: Warning: calculated lightgrid size %i bytes does not match lump size %i\n", count * sizeof(*in), l->filelen);
-
- out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
- loadmodel->brushq3.data_lightgrid = out;
- loadmodel->brushq3.num_lightgrid = count;
-
- // no swapping or validation necessary
- memcpy(out, in, count * (int)sizeof(*out));
-
Matrix4x4_CreateScale3(&loadmodel->brushq3.num_lightgrid_indexfromworld, loadmodel->brushq3.num_lightgrid_scale[0], loadmodel->brushq3.num_lightgrid_scale[1], loadmodel->brushq3.num_lightgrid_scale[2]);
Matrix4x4_ConcatTranslate(&loadmodel->brushq3.num_lightgrid_indexfromworld, -loadmodel->brushq3.num_lightgrid_imins[0] * loadmodel->brushq3.num_lightgrid_cellsize[0], -loadmodel->brushq3.num_lightgrid_imins[1] * loadmodel->brushq3.num_lightgrid_cellsize[1], -loadmodel->brushq3.num_lightgrid_imins[2] * loadmodel->brushq3.num_lightgrid_cellsize[2]);
+
+ // if lump is empty there is nothing to load, we can deal with that in the LightPoint code
+ if (l->filelen)
+ {
+ if (l->filelen < count * (int)sizeof(*in))
+ Host_Error("Mod_Q3BSP_LoadLightGrid: invalid lightgrid lump size %i bytes, should be %i bytes (%ix%ix%i)\n", l->filelen, count * sizeof(*in), loadmodel->brushq3.num_lightgrid_dimensions[0], loadmodel->brushq3.num_lightgrid_dimensions[1], loadmodel->brushq3.num_lightgrid_dimensions[2]);
+ if (l->filelen != count * (int)sizeof(*in))
+ Con_Printf("Mod_Q3BSP_LoadLightGrid: Warning: calculated lightgrid size %i bytes does not match lump size %i\n", count * sizeof(*in), l->filelen);
+ out = Mem_Alloc(loadmodel->mempool, count * sizeof(*out));
+ loadmodel->brushq3.data_lightgrid = out;
+ loadmodel->brushq3.num_lightgrid = count;
+ // no swapping or validation necessary
+ memcpy(out, in, count * (int)sizeof(*out));
+ }
}
static void Mod_Q3BSP_LoadPVS(lump_t *l)
q3dpvs_t *in;
int totalchains;
+ if (l->filelen == 0)
+ {
+ int i;
+ // unvised maps often have cluster indices even without pvs, so check
+ // leafs to find real number of clusters
+ loadmodel->brush.num_pvsclusters = 1;
+ for (i = 0;i < loadmodel->brush.num_leafs;i++)
+ loadmodel->brush.num_pvsclusters = max(loadmodel->brush.num_pvsclusters, loadmodel->brush.data_leafs[i].clusterindex + 1);
+
+ // create clusters
+ loadmodel->brush.num_pvsclusterbytes = (loadmodel->brush.num_pvsclusters + 7) / 8;
+ totalchains = loadmodel->brush.num_pvsclusterbytes * loadmodel->brush.num_pvsclusters;
+ loadmodel->brush.data_pvsclusters = Mem_Alloc(loadmodel->mempool, totalchains);
+ memset(loadmodel->brush.data_pvsclusters, 0xFF, totalchains);
+ return;
+ }
+
in = (void *)(mod_base + l->fileofs);
if (l->filelen < 9)
Host_Error("Mod_Q3BSP_LoadPVS: funny lump size in %s",loadmodel->name);
- loadmodel->brushq3.num_pvsclusters = LittleLong(in->numclusters);
- loadmodel->brushq3.num_pvschainlength = LittleLong(in->chainlength);
- if (loadmodel->brushq3.num_pvschainlength < ((loadmodel->brushq3.num_pvsclusters + 7) / 8))
- Host_Error("Mod_Q3BSP_LoadPVS: (chainlength = %i) < ((numclusters = %i) + 7) / 8\n", loadmodel->brushq3.num_pvschainlength, loadmodel->brushq3.num_pvsclusters);
- totalchains = loadmodel->brushq3.num_pvschainlength * loadmodel->brushq3.num_pvsclusters;
+ loadmodel->brush.num_pvsclusters = LittleLong(in->numclusters);
+ loadmodel->brush.num_pvsclusterbytes = LittleLong(in->chainlength);
+ if (loadmodel->brush.num_pvsclusterbytes < ((loadmodel->brush.num_pvsclusters + 7) / 8))
+ Host_Error("Mod_Q3BSP_LoadPVS: (chainlength = %i) < ((numclusters = %i) + 7) / 8\n", loadmodel->brush.num_pvsclusterbytes, loadmodel->brush.num_pvsclusters);
+ totalchains = loadmodel->brush.num_pvsclusterbytes * loadmodel->brush.num_pvsclusters;
if (l->filelen < totalchains + (int)sizeof(*in))
- Host_Error("Mod_Q3BSP_LoadPVS: lump too small ((numclusters = %i) * (chainlength = %i) + sizeof(q3dpvs_t) == %i bytes, lump is %i bytes)\n", loadmodel->brushq3.num_pvsclusters, loadmodel->brushq3.num_pvschainlength, totalchains + sizeof(*in), l->filelen);
+ Host_Error("Mod_Q3BSP_LoadPVS: lump too small ((numclusters = %i) * (chainlength = %i) + sizeof(q3dpvs_t) == %i bytes, lump is %i bytes)\n", loadmodel->brush.num_pvsclusters, loadmodel->brush.num_pvsclusterbytes, totalchains + sizeof(*in), l->filelen);
- loadmodel->brushq3.data_pvschains = Mem_Alloc(loadmodel->mempool, totalchains);
- memcpy(loadmodel->brushq3.data_pvschains, (qbyte *)(in + 1), totalchains);
+ loadmodel->brush.data_pvsclusters = Mem_Alloc(loadmodel->mempool, totalchains);
+ memcpy(loadmodel->brush.data_pvsclusters, (qbyte *)(in + 1), totalchains);
}
-void Mod_Q3BSP_Load(model_t *mod, void *buffer)
+static void Mod_Q3BSP_LightPoint(model_t *model, const vec3_t p, vec3_t ambientcolor, vec3_t diffusecolor, vec3_t diffusenormal)
{
- int i;
- q3dheader_t *header;
-
- mod->type = mod_brushq2;
-
- header = (q3dheader_t *)buffer;
-
- i = LittleLong(header->version);
- if (i != Q3BSPVERSION)
- Host_Error("Mod_Q3BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q3BSPVERSION);
- if (loadmodel->isworldmodel)
+ int i, j, k, index[3];
+ float transformed[3], blend1, blend2, blend, yaw, pitch, sinpitch;
+ q3dlightgrid_t *a, *s;
+ if (!model->brushq3.num_lightgrid)
{
- Cvar_SetValue("halflifebsp", false);
- // until we get a texture for it...
- R_ResetQuakeSky();
+ ambientcolor[0] = 1;
+ ambientcolor[1] = 1;
+ ambientcolor[2] = 1;
+ return;
+ }
+ Matrix4x4_Transform(&model->brushq3.num_lightgrid_indexfromworld, p, transformed);
+ //Matrix4x4_Print(&model->brushq3.num_lightgrid_indexfromworld);
+ //Con_Printf("%f %f %f transformed %f %f %f clamped ", p[0], p[1], p[2], transformed[0], transformed[1], transformed[2]);
+ transformed[0] = bound(0, transformed[0], model->brushq3.num_lightgrid_isize[0] - 1);
+ transformed[1] = bound(0, transformed[1], model->brushq3.num_lightgrid_isize[1] - 1);
+ transformed[2] = bound(0, transformed[2], model->brushq3.num_lightgrid_isize[2] - 1);
+ index[0] = (int)floor(transformed[0]);
+ index[1] = (int)floor(transformed[1]);
+ index[2] = (int)floor(transformed[2]);
+ //Con_Printf("%f %f %f index %i %i %i:\n", transformed[0], transformed[1], transformed[2], index[0], index[1], index[2]);
+ // now lerp the values
+ VectorClear(diffusenormal);
+ a = &model->brushq3.data_lightgrid[(index[2] * model->brushq3.num_lightgrid_isize[1] + index[1]) * model->brushq3.num_lightgrid_isize[0] + index[0]];
+ for (k = 0;k < 2;k++)
+ {
+ blend1 = (k ? (transformed[2] - index[2]) : (1 - (transformed[2] - index[2])));
+ if (blend1 < 0.001f || index[2] + k >= model->brushq3.num_lightgrid_isize[2])
+ continue;
+ for (j = 0;j < 2;j++)
+ {
+ blend2 = blend1 * (j ? (transformed[1] - index[1]) : (1 - (transformed[1] - index[1])));
+ if (blend2 < 0.001f || index[1] + j >= model->brushq3.num_lightgrid_isize[1])
+ continue;
+ for (i = 0;i < 2;i++)
+ {
+ blend = blend2 * (i ? (transformed[0] - index[0]) : (1 - (transformed[0] - index[0])));
+ if (blend < 0.001f || index[0] + i >= model->brushq3.num_lightgrid_isize[0])
+ continue;
+ s = a + (k * model->brushq3.num_lightgrid_isize[1] + j) * model->brushq3.num_lightgrid_isize[0] + i;
+ VectorMA(ambientcolor, blend * (1.0f / 128.0f), s->ambientrgb, ambientcolor);
+ VectorMA(diffusecolor, blend * (1.0f / 128.0f), s->diffusergb, diffusecolor);
+ pitch = s->diffusepitch * M_PI / 128;
+ yaw = s->diffuseyaw * M_PI / 128;
+ sinpitch = sin(pitch);
+ diffusenormal[0] += blend * (cos(yaw) * sinpitch);
+ diffusenormal[1] += blend * (sin(yaw) * sinpitch);
+ diffusenormal[2] += blend * (cos(pitch));
+ //Con_Printf("blend %f: ambient %i %i %i, diffuse %i %i %i, diffusepitch %i diffuseyaw %i (%f %f, normal %f %f %f)\n", blend, s->ambientrgb[0], s->ambientrgb[1], s->ambientrgb[2], s->diffusergb[0], s->diffusergb[1], s->diffusergb[2], s->diffusepitch, s->diffuseyaw, pitch, yaw, (cos(yaw) * cospitch), (sin(yaw) * cospitch), (-sin(pitch)));
+ }
+ }
+ }
+ VectorNormalize(diffusenormal);
+ //Con_Printf("result: ambient %f %f %f diffuse %f %f %f diffusenormal %f %f %f\n", ambientcolor[0], ambientcolor[1], ambientcolor[2], diffusecolor[0], diffusecolor[1], diffusecolor[2], diffusenormal[0], diffusenormal[1], diffusenormal[2]);
+}
+
+static void Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace_t *trace, model_t *model, mnode_t *node, const vec3_t point, int markframe)
+{
+ int i;
+ mleaf_t *leaf;
+ colbrushf_t *brush;
+ // find which leaf the point is in
+ while (node->plane)
+ node = node->children[DotProduct(point, node->plane->normal) < node->plane->dist];
+ // point trace the brushes
+ leaf = (mleaf_t *)node;
+ for (i = 0;i < leaf->numleafbrushes;i++)
+ {
+ brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
+ if (brush && brush->markframe != markframe && BoxesOverlap(point, point, brush->mins, brush->maxs))
+ {
+ brush->markframe = markframe;
+ Collision_TracePointBrushFloat(trace, point, brush);
+ }
}
+ // can't do point traces on curves (they have no thickness)
+}
+
+static void Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace_t *trace, model_t *model, mnode_t *node, const vec3_t start, const vec3_t end, vec_t startfrac, vec_t endfrac, const vec3_t linestart, const vec3_t lineend, int markframe, const vec3_t segmentmins, const vec3_t segmentmaxs)
+{
+ int i, startside, endside;
+ float dist1, dist2, midfrac, mid[3], nodesegmentmins[3], nodesegmentmaxs[3];
+ mleaf_t *leaf;
+ msurface_t *surface;
+ colbrushf_t *brush;
+ if (startfrac > trace->realfraction)
+ return;
+ // note: all line fragments past first impact fraction are ignored
+ if (VectorCompare(start, end))
+ {
+ // find which leaf the point is in
+ while (node->plane)
+ node = node->children[DotProduct(start, node->plane->normal) < node->plane->dist];
+ }
+ else
+ {
+ // find which nodes the line is in and recurse for them
+ while (node->plane)
+ {
+ // recurse down node sides
+ dist1 = PlaneDiff(start, node->plane);
+ dist2 = PlaneDiff(end, node->plane);
+ startside = dist1 < 0;
+ endside = dist2 < 0;
+ if (startside == endside)
+ {
+ // most of the time the line fragment is on one side of the plane
+ node = node->children[startside];
+ }
+ else
+ {
+ // line crosses node plane, split the line
+ midfrac = dist1 / (dist1 - dist2);
+ VectorLerp(start, midfrac, end, mid);
+ // take the near side first
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, node->children[startside], start, mid, startfrac, midfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ if (midfrac <= trace->realfraction)
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, node->children[endside], mid, end, midfrac, endfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ return;
+ }
+ }
+ }
+ // hit a leaf
+ nodesegmentmins[0] = min(start[0], end[0]);
+ nodesegmentmins[1] = min(start[1], end[1]);
+ nodesegmentmins[2] = min(start[2], end[2]);
+ nodesegmentmaxs[0] = max(start[0], end[0]);
+ nodesegmentmaxs[1] = max(start[1], end[1]);
+ nodesegmentmaxs[2] = max(start[2], end[2]);
+ // line trace the brushes
+ leaf = (mleaf_t *)node;
+ for (i = 0;i < leaf->numleafbrushes;i++)
+ {
+ brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
+ if (brush && brush->markframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, brush->mins, brush->maxs))
+ {
+ brush->markframe = markframe;
+ Collision_TraceLineBrushFloat(trace, linestart, lineend, brush, brush);
+ if (startfrac > trace->realfraction)
+ return;
+ }
+ }
+ // can't do point traces on curves (they have no thickness)
+ if (mod_q3bsp_curves_collisions.integer && !VectorCompare(start, end))
+ {
+ // line trace the curves
+ for (i = 0;i < leaf->numleafsurfaces;i++)
+ {
+ surface = model->data_surfaces + leaf->firstleafsurface[i];
+ if (surface->num_collisiontriangles && surface->collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, surface->mins, surface->maxs))
+ {
+ surface->collisionmarkframe = markframe;
+ Collision_TraceLineTriangleMeshFloat(trace, linestart, lineend, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->texture->supercontents, segmentmins, segmentmaxs);
+ if (startfrac > trace->realfraction)
+ return;
+ }
+ }
+ }
+}
+
+static void Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace_t *trace, model_t *model, mnode_t *node, const colbrushf_t *thisbrush_start, const colbrushf_t *thisbrush_end, int markframe, const vec3_t segmentmins, const vec3_t segmentmaxs)
+{
+ int i;
+ //int sides;
+ float nodesegmentmins[3], nodesegmentmaxs[3];
+ mleaf_t *leaf;
+ colbrushf_t *brush;
+ msurface_t *surface;
+ /*
+ // find which nodes the line is in and recurse for them
+ while (node->plane)
+ {
+ // recurse down node sides
+ int startside, endside;
+ float dist1near, dist1far, dist2near, dist2far;
+ BoxPlaneCornerDistances(thisbrush_start->mins, thisbrush_start->maxs, node->plane, &dist1near, &dist1far);
+ BoxPlaneCornerDistances(thisbrush_end->mins, thisbrush_end->maxs, node->plane, &dist2near, &dist2far);
+ startside = dist1near < 0;
+ startside = dist1near < 0 ? (dist1far < 0 ? 1 : 2) : (dist1far < 0 ? 2 : 0);
+ endside = dist2near < 0 ? (dist2far < 0 ? 1 : 2) : (dist2far < 0 ? 2 : 0);
+ if (startside == 2 || endside == 2)
+ {
+ // brushes cross plane
+ // do not clip anything, just take both sides
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ if (startside == 0)
+ {
+ if (endside == 0)
+ {
+ node = node->children[0];
+ continue;
+ }
+ else
+ {
+ //midf0 = dist1near / (dist1near - dist2near);
+ //midf1 = dist1far / (dist1far - dist2far);
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ }
+ else
+ {
+ if (endside == 0)
+ {
+ //midf0 = dist1near / (dist1near - dist2near);
+ //midf1 = dist1far / (dist1far - dist2far);
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ else
+ {
+ node = node->children[1];
+ continue;
+ }
+ }
+
+ if (dist1near < 0 && dist2near < 0 && dist1far < 0 && dist2far < 0){node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near < 0 && dist1far < 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near < 0 && dist1far >= 0 && dist2far < 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near < 0 && dist1far >= 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near >= 0 && dist1far < 0 && dist2far < 0){node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near >= 0 && dist1far < 0 && dist2far >= 0){}
+ if (dist1near < 0 && dist2near >= 0 && dist1far >= 0 && dist2far < 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near < 0 && dist2near >= 0 && dist1far >= 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near < 0 && dist1far < 0 && dist2far < 0){node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near < 0 && dist1far < 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near < 0 && dist1far >= 0 && dist2far < 0){}
+ if (dist1near >= 0 && dist2near < 0 && dist1far >= 0 && dist2far >= 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far < 0 && dist2far < 0){Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);node = node->children[1];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far < 0 && dist2far >= 0){node = node->children[0];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far >= 0 && dist2far < 0){node = node->children[0];continue;}
+ if (dist1near >= 0 && dist2near >= 0 && dist1far >= 0 && dist2far >= 0){node = node->children[0];continue;}
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ }
+ else // d1n<0 && d2n>0
+ {
+ }
+ }
+ else // d1n<0 && d2n>0
+ {
+ if (dist2near < 0) // d1n<0 && d2n<0
+ {
+ }
+ else // d1n<0 && d2n>0
+ {
+ }
+ }
+ }
+ else // d1n<0 && d2n>0
+ {
+ }
+ }
+ else // d1n>0
+ {
+ if (dist2near < 0) // d1n>0 && d2n<0
+ {
+ }
+ else // d1n>0 && d2n>0
+ {
+ }
+ }
+ if (dist1near < 0 == dist1far < 0 == dist2near < 0 == dist2far < 0)
+ {
+ node = node->children[startside];
+ continue;
+ }
+ if (dist1near < dist2near)
+ {
+ // out
+ if (dist1near >= 0)
+ {
+ node = node->children[0];
+ continue;
+ }
+ if (dist2far < 0)
+ {
+ node = node->children[1];
+ continue;
+ }
+ // dist1near < 0 && dist2far >= 0
+ }
+ else
+ {
+ // in
+ }
+ startside = dist1near < 0 ? (dist1far < 0 ? 1 : 2) : (dist1far < 0 ? 2 : 0);
+ endside = dist2near < 0 ? (dist2far < 0 ? 1 : 2) : (dist2far < 0 ? 2 : 0);
+ if (startside == 2 || endside == 2)
+ {
+ // brushes cross plane
+ // do not clip anything, just take both sides
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ else if (startside == endside)
+ node = node->children[startside];
+ else if (startside == 0) // endside = 1 (start infront, end behind)
+ {
+ }
+ else // startside == 1 endside = 0 (start behind, end infront)
+ {
+ }
+ == endside)
+ {
+ if (startside < 2)
+ node = node->children[startside];
+ else
+ {
+ // start and end brush cross plane
+ }
+ }
+ else
+ {
+ }
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ node = node->children[1];
+ else if (dist1near < 0 && dist1far < 0 && dist2near >= 0 && dist2far >= 0)
+ else if (dist1near >= 0 && dist1far >= 0 && dist2near < 0 && dist2far < 0)
+ else if (dist1near >= 0 && dist1far >= 0 && dist2near >= 0 && dist2far >= 0)
+ node = node->children[0];
+ else
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ {
+ }
+ else if (dist1near >= 0 && dist1far >= 0)
+ {
+ }
+ else // mixed (lying on plane)
+ {
+ }
+ {
+ if (dist2near < 0 && dist2far < 0)
+ {
+ }
+ else
+ node = node->children[1];
+ }
+ if (dist1near < 0 && dist1far < 0 && dist2near < 0 && dist2far < 0)
+ node = node->children[0];
+ else if (dist1near >= 0 && dist1far >= 0 && dist2near >= 0 && dist2far >= 0)
+ node = node->children[1];
+ else
+ {
+ // both sides
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[startside], start, mid, startfrac, midfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ sides = dist1near || dist1near < 0 | dist1far < 0 | dist2near < 0 | dist
+ startside = dist1 < 0;
+ endside = dist2 < 0;
+ if (startside == endside)
+ {
+ // most of the time the line fragment is on one side of the plane
+ node = node->children[startside];
+ }
+ else
+ {
+ // line crosses node plane, split the line
+ midfrac = dist1 / (dist1 - dist2);
+ VectorLerp(start, midfrac, end, mid);
+ // take the near side first
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[startside], start, mid, startfrac, midfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ if (midfrac <= trace->fraction)
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, node->children[endside], mid, end, midfrac, endfrac, linestart, lineend, markframe, segmentmins, segmentmaxs);
+ return;
+ }
+ }
+ */
+#if 1
+ for (;;)
+ {
+ nodesegmentmins[0] = max(segmentmins[0], node->mins[0]);
+ nodesegmentmins[1] = max(segmentmins[1], node->mins[1]);
+ nodesegmentmins[2] = max(segmentmins[2], node->mins[2]);
+ nodesegmentmaxs[0] = min(segmentmaxs[0], node->maxs[0]);
+ nodesegmentmaxs[1] = min(segmentmaxs[1], node->maxs[1]);
+ nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2]);
+ if (nodesegmentmins[0] > nodesegmentmaxs[0] || nodesegmentmins[1] > nodesegmentmaxs[1] || nodesegmentmins[2] > nodesegmentmaxs[2])
+ return;
+ if (!node->plane)
+ break;
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+#elif 0
+ // FIXME: could be made faster by copying TraceLine code and making it use
+ // box plane distances... (variant on the BoxOnPlaneSide code)
+ for (;;)
+ {
+ nodesegmentmins[0] = max(segmentmins[0], node->mins[0]);
+ nodesegmentmins[1] = max(segmentmins[1], node->mins[1]);
+ nodesegmentmins[2] = max(segmentmins[2], node->mins[2]);
+ nodesegmentmaxs[0] = min(segmentmaxs[0], node->maxs[0]);
+ nodesegmentmaxs[1] = min(segmentmaxs[1], node->maxs[1]);
+ nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2]);
+ if (nodesegmentmins[0] > nodesegmentmaxs[0] || nodesegmentmins[1] > nodesegmentmaxs[1] || nodesegmentmins[2] > nodesegmentmaxs[2])
+ return;
+ if (!node->plane)
+ break;
+ if (mod_q3bsp_debugtracebrush.integer == 2)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ else if (mod_q3bsp_debugtracebrush.integer == 1)
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ continue;
+ }
+ else
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ // now check start and end brush boxes to handle a lot of 'diagonal' cases more efficiently...
+ sides = BoxOnPlaneSide(thisbrush_start->mins, thisbrush_start->maxs, node->plane) | BoxOnPlaneSide(thisbrush_end->mins, thisbrush_end->maxs, node->plane);
+ if (sides == 3)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ continue;
+ }
+ }
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ continue;
+ }
+ return;
+ }
+#else
+ // FIXME: could be made faster by copying TraceLine code and making it use
+ // box plane distances... (variant on the BoxOnPlaneSide code)
+ for (;;)
+ {
+ nodesegmentmins[0] = max(segmentmins[0], node->mins[0]);
+ nodesegmentmins[1] = max(segmentmins[1], node->mins[1]);
+ nodesegmentmins[2] = max(segmentmins[2], node->mins[2]);
+ nodesegmentmaxs[0] = min(segmentmaxs[0], node->maxs[0]);
+ nodesegmentmaxs[1] = min(segmentmaxs[1], node->maxs[1]);
+ nodesegmentmaxs[2] = min(segmentmaxs[2], node->maxs[2]);
+ if (nodesegmentmins[0] > nodesegmentmaxs[0] || nodesegmentmins[1] > nodesegmentmaxs[1] || nodesegmentmins[2] > nodesegmentmaxs[2])
+ return;
+ if (!node->plane)
+ break;
+ if (mod_q3bsp_debugtracebrush.integer == 2)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ else if (mod_q3bsp_debugtracebrush.integer == 1)
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ node = node->children[1];
+ }
+ else
+ {
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ }
+ }
+ else
+ {
+ // recurse down node sides
+ sides = BoxOnPlaneSide(nodesegmentmins, nodesegmentmaxs, node->plane);
+ if (sides == 3)
+ {
+ // segment box crosses plane
+ // now check start and end brush boxes to handle a lot of 'diagonal' cases more efficiently...
+ sides = BoxOnPlaneSide(thisbrush_start->mins, thisbrush_start->maxs, node->plane) | BoxOnPlaneSide(thisbrush_end->mins, thisbrush_end->maxs, node->plane);
+ if (sides == 3)
+ {
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, node->children[0], thisbrush_start, thisbrush_end, markframe, segmentmins, segmentmaxs);
+ sides = 2;
+ }
+ }
+ // take whichever side the segment box is on
+ node = node->children[sides - 1];
+ }
+ }
+#endif
+ // hit a leaf
+ leaf = (mleaf_t *)node;
+ for (i = 0;i < leaf->numleafbrushes;i++)
+ {
+ brush = model->brush.data_brushes[leaf->firstleafbrush[i]].colbrushf;
+ if (brush && brush->markframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, brush->mins, brush->maxs))
+ {
+ brush->markframe = markframe;
+ Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, brush, brush);
+ }
+ }
+ if (mod_q3bsp_curves_collisions.integer)
+ {
+ for (i = 0;i < leaf->numleafsurfaces;i++)
+ {
+ surface = model->data_surfaces + leaf->firstleafsurface[i];
+ if (surface->num_collisiontriangles && surface->collisionmarkframe != markframe && BoxesOverlap(nodesegmentmins, nodesegmentmaxs, surface->mins, surface->maxs))
+ {
+ surface->collisionmarkframe = markframe;
+ Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->texture->supercontents, segmentmins, segmentmaxs);
+ }
+ }
+ }
+}
+
+static void Mod_Q3BSP_TraceBox(model_t *model, int frame, trace_t *trace, const vec3_t boxstartmins, const vec3_t boxstartmaxs, const vec3_t boxendmins, const vec3_t boxendmaxs, int hitsupercontentsmask)
+{
+ int i;
+ float segmentmins[3], segmentmaxs[3];
+ colbrushf_t *thisbrush_start, *thisbrush_end;
+ matrix4x4_t startmatrix, endmatrix;
+ static int markframe = 0;
+ msurface_t *surface;
+ q3mbrush_t *brush;
+ memset(trace, 0, sizeof(*trace));
+ trace->fraction = 1;
+ trace->realfraction = 1;
+ trace->hitsupercontentsmask = hitsupercontentsmask;
+ Matrix4x4_CreateIdentity(&startmatrix);
+ Matrix4x4_CreateIdentity(&endmatrix);
+ segmentmins[0] = min(boxstartmins[0], boxendmins[0]);
+ segmentmins[1] = min(boxstartmins[1], boxendmins[1]);
+ segmentmins[2] = min(boxstartmins[2], boxendmins[2]);
+ segmentmaxs[0] = max(boxstartmaxs[0], boxendmaxs[0]);
+ segmentmaxs[1] = max(boxstartmaxs[1], boxendmaxs[1]);
+ segmentmaxs[2] = max(boxstartmaxs[2], boxendmaxs[2]);
+ if (mod_q3bsp_optimizedtraceline.integer && VectorCompare(boxstartmins, boxstartmaxs) && VectorCompare(boxendmins, boxendmaxs))
+ {
+ if (VectorCompare(boxstartmins, boxendmins))
+ {
+ // point trace
+ if (model->brush.submodel)
+ {
+ for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
+ if (brush->colbrushf)
+ Collision_TracePointBrushFloat(trace, boxstartmins, brush->colbrushf);
+ }
+ else
+ Mod_Q3BSP_TracePoint_RecursiveBSPNode(trace, model, model->brush.data_nodes, boxstartmins, ++markframe);
+ }
+ else
+ {
+ // line trace
+ if (model->brush.submodel)
+ {
+ for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
+ if (brush->colbrushf)
+ Collision_TraceLineBrushFloat(trace, boxstartmins, boxendmins, brush->colbrushf, brush->colbrushf);
+ if (mod_q3bsp_curves_collisions.integer)
+ for (i = 0, surface = model->data_surfaces + model->firstmodelsurface;i < model->nummodelsurfaces;i++, surface++)
+ if (surface->num_collisiontriangles)
+ Collision_TraceLineTriangleMeshFloat(trace, boxstartmins, boxendmins, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->texture->supercontents, segmentmins, segmentmaxs);
+ }
+ else
+ Mod_Q3BSP_TraceLine_RecursiveBSPNode(trace, model, model->brush.data_nodes, boxstartmins, boxendmins, 0, 1, boxstartmins, boxendmins, ++markframe, segmentmins, segmentmaxs);
+ }
+ }
+ else
+ {
+ // box trace, performed as brush trace
+ thisbrush_start = Collision_BrushForBox(&startmatrix, boxstartmins, boxstartmaxs);
+ thisbrush_end = Collision_BrushForBox(&endmatrix, boxendmins, boxendmaxs);
+ if (model->brush.submodel)
+ {
+ for (i = 0, brush = model->brush.data_brushes + model->firstmodelbrush;i < model->nummodelbrushes;i++, brush++)
+ if (brush->colbrushf)
+ Collision_TraceBrushBrushFloat(trace, thisbrush_start, thisbrush_end, brush->colbrushf, brush->colbrushf);
+ if (mod_q3bsp_curves_collisions.integer)
+ for (i = 0, surface = model->data_surfaces + model->firstmodelsurface;i < model->nummodelsurfaces;i++, surface++)
+ if (surface->num_collisiontriangles)
+ Collision_TraceBrushTriangleMeshFloat(trace, thisbrush_start, thisbrush_end, surface->num_collisiontriangles, surface->data_collisionelement3i, surface->data_collisionvertex3f, surface->texture->supercontents, segmentmins, segmentmaxs);
+ }
+ else
+ Mod_Q3BSP_TraceBrush_RecursiveBSPNode(trace, model, model->brush.data_nodes, thisbrush_start, thisbrush_end, ++markframe, segmentmins, segmentmaxs);
+ }
+}
+
+static int Mod_Q3BSP_SuperContentsFromNativeContents(model_t *model, int nativecontents)
+{
+ int supercontents = 0;
+ if (nativecontents & CONTENTSQ3_SOLID)
+ supercontents |= SUPERCONTENTS_SOLID;
+ if (nativecontents & CONTENTSQ3_WATER)
+ supercontents |= SUPERCONTENTS_WATER;
+ if (nativecontents & CONTENTSQ3_SLIME)
+ supercontents |= SUPERCONTENTS_SLIME;
+ if (nativecontents & CONTENTSQ3_LAVA)
+ supercontents |= SUPERCONTENTS_LAVA;
+ if (nativecontents & CONTENTSQ3_BODY)
+ supercontents |= SUPERCONTENTS_BODY;
+ if (nativecontents & CONTENTSQ3_CORPSE)
+ supercontents |= SUPERCONTENTS_CORPSE;
+ if (nativecontents & CONTENTSQ3_NODROP)
+ supercontents |= SUPERCONTENTS_NODROP;
+ if (nativecontents & CONTENTSQ3_PLAYERCLIP)
+ supercontents |= SUPERCONTENTS_PLAYERCLIP;
+ if (nativecontents & CONTENTSQ3_MONSTERCLIP)
+ supercontents |= SUPERCONTENTS_MONSTERCLIP;
+ if (nativecontents & CONTENTSQ3_DONOTENTER)
+ supercontents |= SUPERCONTENTS_DONOTENTER;
+ return supercontents;
+}
+
+static int Mod_Q3BSP_NativeContentsFromSuperContents(model_t *model, int supercontents)
+{
+ int nativecontents = 0;
+ if (supercontents & SUPERCONTENTS_SOLID)
+ nativecontents |= CONTENTSQ3_SOLID;
+ if (supercontents & SUPERCONTENTS_WATER)
+ nativecontents |= CONTENTSQ3_WATER;
+ if (supercontents & SUPERCONTENTS_SLIME)
+ nativecontents |= CONTENTSQ3_SLIME;
+ if (supercontents & SUPERCONTENTS_LAVA)
+ nativecontents |= CONTENTSQ3_LAVA;
+ if (supercontents & SUPERCONTENTS_BODY)
+ nativecontents |= CONTENTSQ3_BODY;
+ if (supercontents & SUPERCONTENTS_CORPSE)
+ nativecontents |= CONTENTSQ3_CORPSE;
+ if (supercontents & SUPERCONTENTS_NODROP)
+ nativecontents |= CONTENTSQ3_NODROP;
+ if (supercontents & SUPERCONTENTS_PLAYERCLIP)
+ nativecontents |= CONTENTSQ3_PLAYERCLIP;
+ if (supercontents & SUPERCONTENTS_MONSTERCLIP)
+ nativecontents |= CONTENTSQ3_MONSTERCLIP;
+ if (supercontents & SUPERCONTENTS_DONOTENTER)
+ nativecontents |= CONTENTSQ3_DONOTENTER;
+ return nativecontents;
+}
+
+void Mod_Q3BSP_RecursiveFindNumLeafs(mnode_t *node)
+{
+ int numleafs;
+ while (node->plane)
+ {
+ Mod_Q3BSP_RecursiveFindNumLeafs(node->children[0]);
+ node = node->children[1];
+ }
+ numleafs = ((mleaf_t *)node - loadmodel->brush.data_leafs) + 1;
+ if (loadmodel->brush.num_leafs < numleafs)
+ loadmodel->brush.num_leafs = numleafs;
+}
+
+void Mod_Q3BSP_Load(model_t *mod, void *buffer)
+{
+ int i, j, numshadowmeshtriangles;
+ q3dheader_t *header;
+ float corner[3], yawradius, modelradius;
+ msurface_t *surface;
+
+ mod->type = mod_brushq3;
+ mod->numframes = 2; // although alternate textures are not supported it is annoying to complain about no such frame 1
+ mod->numskins = 1;
+
+ header = (q3dheader_t *)buffer;
+
+ i = LittleLong(header->version);
+ if (i != Q3BSPVERSION)
+ Host_Error("Mod_Q3BSP_Load: %s has wrong version number (%i, should be %i)", mod->name, i, Q3BSPVERSION);
+ if (mod->isworldmodel)
+ Cvar_SetValue("halflifebsp", false);
+
+ mod->soundfromcenter = true;
+ mod->TraceBox = Mod_Q3BSP_TraceBox;
+ mod->brush.SuperContentsFromNativeContents = Mod_Q3BSP_SuperContentsFromNativeContents;
+ mod->brush.NativeContentsFromSuperContents = Mod_Q3BSP_NativeContentsFromSuperContents;
+ mod->brush.GetPVS = Mod_Q1BSP_GetPVS;
+ mod->brush.FatPVS = Mod_Q1BSP_FatPVS;
+ mod->brush.BoxTouchingPVS = Mod_Q1BSP_BoxTouchingPVS;
+ mod->brush.BoxTouchingLeafPVS = Mod_Q1BSP_BoxTouchingLeafPVS;
+ mod->brush.BoxTouchingVisibleLeafs = Mod_Q1BSP_BoxTouchingVisibleLeafs;
+ mod->brush.LightPoint = Mod_Q3BSP_LightPoint;
+ mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ mod->brush.PointInLeaf = Mod_Q1BSP_PointInLeaf;
+ mod->Draw = R_Q1BSP_Draw;
+ mod->GetLightInfo = R_Q1BSP_GetLightInfo;
+ mod->DrawShadowVolume = R_Q1BSP_DrawShadowVolume;
+ mod->DrawLight = R_Q1BSP_DrawLight;
mod_base = (qbyte *)header;
// swap all the lumps
- for (i = 0;i < (int) sizeof(*header) / 4;i++)
- ((int *)header)[i] = LittleLong(((int *)header)[i]);
+ header->ident = LittleLong(header->ident);
+ header->version = LittleLong(header->version);
+ for (i = 0;i < Q3HEADER_LUMPS;i++)
+ {
+ header->lumps[i].fileofs = LittleLong(header->lumps[i].fileofs);
+ header->lumps[i].filelen = LittleLong(header->lumps[i].filelen);
+ }
Mod_Q3BSP_LoadEntities(&header->lumps[Q3LUMP_ENTITIES]);
Mod_Q3BSP_LoadTextures(&header->lumps[Q3LUMP_TEXTURES]);
Mod_Q3BSP_LoadNodes(&header->lumps[Q3LUMP_NODES]);
Mod_Q3BSP_LoadLightGrid(&header->lumps[Q3LUMP_LIGHTGRID]);
Mod_Q3BSP_LoadPVS(&header->lumps[Q3LUMP_PVS]);
+ loadmodel->brush.numsubmodels = loadmodel->brushq3.num_models;
+
+ // the MakePortals code works fine on the q3bsp data as well
+ Mod_Q1BSP_MakePortals();
+
+ // make a single combined shadow mesh to allow optimized shadow volume creation
+ numshadowmeshtriangles = 0;
+ for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ {
+ surface->num_firstshadowmeshtriangle = numshadowmeshtriangles;
+ numshadowmeshtriangles += surface->num_triangles;
+ }
+ loadmodel->brush.shadowmesh = Mod_ShadowMesh_Begin(loadmodel->mempool, numshadowmeshtriangles * 3, numshadowmeshtriangles, NULL, NULL, NULL, false, false, true);
+ for (j = 0, surface = loadmodel->data_surfaces;j < loadmodel->num_surfaces;j++, surface++)
+ if (surface->groupmesh)
+ Mod_ShadowMesh_AddMesh(loadmodel->mempool, loadmodel->brush.shadowmesh, NULL, NULL, NULL, surface->groupmesh->data_vertex3f, NULL, NULL, NULL, NULL, surface->num_triangles, (surface->groupmesh->data_element3i + 3 * surface->num_firsttriangle));
+ loadmodel->brush.shadowmesh = Mod_ShadowMesh_Finish(loadmodel->mempool, loadmodel->brush.shadowmesh, false, true);
+ Mod_BuildTriangleNeighbors(loadmodel->brush.shadowmesh->neighbor3i, loadmodel->brush.shadowmesh->element3i, loadmodel->brush.shadowmesh->numtriangles);
+
+ loadmodel->brush.num_leafs = 0;
+ Mod_Q3BSP_RecursiveFindNumLeafs(loadmodel->brush.data_nodes);
+
+ if (loadmodel->isworldmodel)
+ {
+ // clear out any stale submodels or worldmodels lying around
+ // if we did this clear before now, an error might abort loading and
+ // leave things in a bad state
+ Mod_RemoveStaleWorldModels(loadmodel);
+ }
+
+ mod = loadmodel;
+ for (i = 0;i < loadmodel->brush.numsubmodels;i++)
+ {
+ if (i > 0)
+ {
+ char name[10];
+ // LordHavoc: only register submodels if it is the world
+ // (prevents external bsp models from replacing world submodels with
+ // their own)
+ if (!loadmodel->isworldmodel)
+ continue;
+ // duplicate the basic information
+ sprintf(name, "*%i", i);
+ mod = Mod_FindName(name);
+ *mod = *loadmodel;
+ strcpy(mod->name, name);
+ // textures and memory belong to the main model
+ mod->texturepool = NULL;
+ mod->mempool = NULL;
+ mod->brush.GetPVS = NULL;
+ mod->brush.FatPVS = NULL;
+ mod->brush.BoxTouchingPVS = NULL;
+ mod->brush.BoxTouchingLeafPVS = NULL;
+ mod->brush.BoxTouchingVisibleLeafs = NULL;
+ mod->brush.LightPoint = NULL;
+ mod->brush.FindNonSolidLocation = Mod_Q1BSP_FindNonSolidLocation;
+ }
+ mod->brush.submodel = i;
+
+ // make the model surface list (used by shadowing/lighting)
+ mod->firstmodelsurface = mod->brushq3.data_models[i].firstface;
+ mod->nummodelsurfaces = mod->brushq3.data_models[i].numfaces;
+ mod->firstmodelbrush = mod->brushq3.data_models[i].firstbrush;
+ mod->nummodelbrushes = mod->brushq3.data_models[i].numbrushes;
+ mod->surfacelist = Mem_Alloc(loadmodel->mempool, mod->nummodelsurfaces * sizeof(*mod->surfacelist));
+ for (j = 0;j < mod->nummodelsurfaces;j++)
+ mod->surfacelist[j] = mod->firstmodelsurface + j;
+
+ VectorCopy(mod->brushq3.data_models[i].mins, mod->normalmins);
+ VectorCopy(mod->brushq3.data_models[i].maxs, mod->normalmaxs);
+ corner[0] = max(fabs(mod->normalmins[0]), fabs(mod->normalmaxs[0]));
+ corner[1] = max(fabs(mod->normalmins[1]), fabs(mod->normalmaxs[1]));
+ corner[2] = max(fabs(mod->normalmins[2]), fabs(mod->normalmaxs[2]));
+ modelradius = sqrt(corner[0]*corner[0]+corner[1]*corner[1]+corner[2]*corner[2]);
+ yawradius = sqrt(corner[0]*corner[0]+corner[1]*corner[1]);
+ mod->rotatedmins[0] = mod->rotatedmins[1] = mod->rotatedmins[2] = -modelradius;
+ mod->rotatedmaxs[0] = mod->rotatedmaxs[1] = mod->rotatedmaxs[2] = modelradius;
+ mod->yawmaxs[0] = mod->yawmaxs[1] = yawradius;
+ mod->yawmins[0] = mod->yawmins[1] = -yawradius;
+ mod->yawmins[2] = mod->normalmins[2];
+ mod->yawmaxs[2] = mod->normalmaxs[2];
+ mod->radius = modelradius;
+ mod->radius2 = modelradius * modelradius;
+
+ for (j = 0;j < mod->nummodelsurfaces;j++)
+ if (mod->data_surfaces[j + mod->firstmodelsurface].texture->surfaceflags & Q3SURFACEFLAG_SKY)
+ break;
+ if (j < mod->nummodelsurfaces)
+ mod->DrawSky = R_Q1BSP_DrawSky;
+ }
}
void Mod_IBSP_Load(model_t *mod, void *buffer)
projects / xonotic / darkplaces.git / blobdiff